all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 4.46 MiB | March 10 2022 | |||
1 |
|
Internal photos | Internal Photos | 838.40 KiB | March 10 2022 | |||
1 |
|
External photos | External Photos | 1.66 MiB | March 10 2022 | |||
1 |
|
ID label and location | ID Label/Location Info | 1.08 MiB | March 10 2022 | |||
1 | Block Diagram | Block Diagram | March 10 2022 | confidential | ||||
1 |
|
Confidentiality | Cover Letter(s) | 149.67 KiB | March 10 2022 | |||
1 |
|
Letter Authorization | Cover Letter(s) | 147.66 KiB | March 10 2022 | |||
1 | Operational Description | Operational Description | March 10 2022 | confidential | ||||
1 | Schematics | Schematics | March 10 2022 | confidential | ||||
1 |
|
Test reports | Test Report | 1.50 MiB | March 10 2022 | |||
1 |
|
Test setup photos | Test Setup Photos | 781.54 KiB | March 10 2022 |
1 | User manual | Users Manual | 4.46 MiB | March 10 2022 |
For certification information, please refer to User Manuals:
http://www.grandstream.com U.S. FCC Part 15 Regulatory Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com For Warranty and RMA information, please visit www.grandstream.com HT818 Analog Telephone Adaptor Quick Installation Guide Content English..................................................................................1
..............................................................................5 Espaol.................................................................................9 Franais...............................................................................13 Deutsch...............................................................................17 Italiano................................................................................21
................................................................................25 Portugus............................................................................29 Polski..................................................................................33 The HT818 is not pre-configured to support or make emergency calls to any type of hospital, law enforcement agency, medical care unit (Emergency Service(s)) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Ser-
vices. It is your responsibility to purchase SIP-compli-
ant Internet telephone service, properly configure the HT818 to use that service, and periodically test your configuration to confirm that it works as you expect. If you do not do so, it is your responsibility to purchase traditional wireless or landline telephone services to ac-
cess Emergency Services. GRANDSTREAM DOES NOT PROVIDE CONNEC-
TIONS TO EMERGENCY SERVICES VIA THE HT818. NEITHER GRANDSTREAM NOR ITS OFFICERS, EMPLOYEES OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS. YOU HERE-
BY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE HT818 TO CONTACT EMER-
GENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMER-
GENCY SERVICES IN ACCORDANCE WITH THE IM-
MEDIATELY PRECEDING PARAGRAPH. EN 1 OVERVIEW The HT818 is an advanced 8-port VoIP gateway with 8 FXS ports and an integrated Gigabit NAT router. Built upon Grandstreams market-leading SIP ATA/gateway technology with millions of units successfully deployed worldwide, this powerful gateway features exceptional voice quality in various application environments, strong encryption with unique security certificate per unit, automated provisioning for volume deployment and device management, and outstanding network performance for home and office use. PRECAUTIONS Do not attempt to open, disassemble, or modify the device. Do not use a third party power adapter. Do not expose this device to temperatures outside range of -10 C to
+60 C. Do not expose the HT818 to environments outside of the following humidity range: 10-90% RH (non-condensing). Do NOT power cycle the HT818 during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to mal-
function. PACKAGE CONTENTS 12 V 1 x HT818 1 x 12V Power Adapter 1 x Ethernet Cable 1 x Quick Installation Guide 1 x GPL Statement 2 HT818 PORTS CONFIGURING THE HT818 Port Description Power socket. Used to power HT818 (12V - 1.5A) Network LAN port. Used to connect your HT818 to local network when using as router. Network WAN port. Used to connect HT818 to your router or gateway using an Ethernet RJ45 cable. FXS ports to connect analog phones / fax ma-
chines to HT818 using RJ11 telephone cable. Factory reset button. Press for 7 seconds to reset to factory default settings. CONNECTING THE HT818 The HT818 is designed for easy configuration and easy installation, to connect your HT818, please follow the steps below:
1. Insert a standard RJ11 telephone cable into the phone port and con-
nect the other end of the telephone cable to a standard touch-tone ana-
log telephone. 2. Insert the ethernet cable into the internet or LAN port of the HT818 and connect the other end of the ethernet cable to an uplink port (a router or a modem, etc.) 3. Insert the power adapter into the HT818 and connect it to a wall outlet. 4. The Power, Ethernet, and Phone LEDs will be solidly lit when the Phone Adapter is ready for use. 3 The HT818 can be configured either using the embedded Web GUI using PCs web browser or using the IVR voice prompt menu. Obtaining the IP address The HT818 is by default configured to obtain the IP address from DHCP server where the unit is located. In order to know which IP address is assigned to your HT818, you should access to the Interactive Voice Response Menu of your adapter via the connected phone and check its IP address mode. Please refer to the steps below to access the interactive voice response menu:
1. Use a telephone connected to phone 1-8 port of your HT818. 2. Press *** (press the star key three times) to access the IVR menu and wait until you hear Enter the menu option . 3. Press 02 and the current IP address will be announced. Configure using Web UI 1. Connect the computer to the same network as your HT818 and make sure the HT818 is booted up. 2. You may check your HT818 IP address using the IVR on the con-
nected phone. 3. Open the Web browser on your computer. 4. Enter the HT818s IP address in the address bar of the browser. 5. Enter the administrators password to access the Web Configuration Menu. (By default the admin password is admin) Note: The computer must be connected to the same sub-network as the HT818. This can be easily done by connecting the computer to the same hub or switch as the HT818. Please download the user manual and FAQ for more detailed configura-
tion instructions: http://www.grandstream.com/our-products 4 ZH HT818
() SIP HT818 HT818 Grandstream Networks HT818 Grandstream Networks HT818 HT818VoIP8FXS NATGrandstreamSIP ATA/
HT818
-1060. HT81810-90%. 12 V HT818 1 12V 1 1 5 6 1 GPL 1 HT818 HT818(12V - 1.5A) LANHT818 RJ45HT818 FXSRJ-11/
. 7 HT818 HT818HT818 1.RJ11HT818FXS 2.HT818WANLAN 3.HT818 4.HT818LED IVR HT818. HT818 IP HT818DHCPIP HT818, IVRIP IVR:
1. HT8181-8 2.***IVR 3.02HT818IP WEB 1.HT818HT818 2.IVRHT818IP 3. 4.HT818IP 5.adminad-
min
: HT818 HT818 http://www.grandstream.com/our-products 7 8 El HT818 no esta pre-configurado para soportar o reali-
zar llamadas de emergencia a ningn tipo de hospital, agencia policial, unidad de cuidado medico o cualquier otro servicio de emergencia. Es su responsabilidad contratar un servicio de telefona de Internet compat-
ible con el protocolo SIP, configurar el HT818 para uti-
lizar dicho servicio y peridicamente probar esta con-
figuracin para confirmar que este trabajando como usted espera. Si este requisito no es completado, es su responsabilidad contratar un servicio de telefona fija o celular para tener acceso a servicios de emergencia. GRANDSTREAM NO PROVEE CONEXIONES A SERVICIOS DE EMERGENCIA A TRAVS DEL HT818. NI GRANDSTREAM NI NINGUNO DE SUS ACCIONISTAS, EMPLEADOS O AFILIADOS SON RESPONSABLES DE NINGUNA DEMANDA, DAO O PERDIDA QUE ESTO PUEDA OCASIONAR Y MEDIANTE ESTE COMUNICADO USTED RENUN-
CIA A CUALQUIER RECLAMO O CONSECUENCIA PROVENIENTE O RELACIONADO DE LA INHAB-
ILIDAD DE CONTACTAR SERVICIOS DE EMER-
GENCIAS CON EL HT818 Y SU FALTA DE NO HABER HECHO LOS ARREGLOS DE LUGAR PARA ACCESAR ESTOS SERVICIOS DE EMERGEN-
CIA DE ACUERDO CON EL PRRAFO ANTERIOR. ES 9 INFORMACIN GENERAL El HT818 es un gateway VoIP avanzado con 8 puertos FXS y un router NAT Gigabit integrado. Diseado en base a la tecnologa de ATA/gate-
way SIP lder en el mercado de Grandstream con millones de unidades exitosamente instaladas en todo el mundo, este poderoso ATA ofrece una excepcional calidad de voz en varios entornos de aplicaciones, ci-
frado reforzado con certificado de seguridad nico por unidad, aprovi-
sionamiento automtico para despliegue de volumen y manejo del dis-
positivo y excelente rendimiento de red para uso en el hogar y la oficina. PRECAUCIONES No trate de abrir, desarmar o modificar el dispositivo No use un adaptador de corriente de terceros No exponga este dispositivo a temperaturas fuera de la gama de -10 C a +60 C No exponga el HT818 a ambientes fuera de la gama de humedad siguiente: Humedad relativa 10-90 % (sin condensacin) NO apague y encienda el HT818 durante la puesta en marcha del sistema o durante una actualizacin del firmware. Se pueden corromper las imgenes del firmware y causar fallas de funcionamiento en la uni-
dad CONTENIDO DEL PAQUETE 12 V 1 x HT818 1 x Adaptador de Aliment-
acin12V DC 1 x Cable Ethernet 1 x Gua de Inicio Rpido 1 x Licencia GPL 10 HT818 PUERTOS Puerto Descripcin Puerto de alimentacin. Usado para energizar el HT818 (12V - 1.5 A). Puerto LAN de red. Se utiliza para conectar el HT818 a la red local cuando se utiliza como router. Puerto de red. Usado para conectar el HT818 a su router o puerta de enlace usando un cable Ether-
net RJ45 Puertos FXS para conectar telfonos anlogos /
mquinas de Fax al adaptador de telfono usando un cable de telefnico RJ-11. Botn de reinicio de fbrica. Presione por 7 segun-
dos para llevar a los ajustes de fbrica CONEXIN DEL HT818 El HT818 est diseado para una fcil configuracin e instalacin, para conectar su HT818, por favor siga los pasos de arriba:
1. Inserte un cable telefnico estndar RJ11 al puerto de telfono y co-
necte el otro extremo del cable a un telfono analgico de tonos estn-
dar 2. Inserte el cable Ethernet al puerto Internet o LAN del HT818 y co-
necte el otro extremo del cable a un puerto de enlace (un router o m-
dem, etc.) 3. Inserte el adaptador de corriente en el HT818 y conctelo al toma corriente. 4. Los LEDs Power, Ethernet y Phone se iluminarn slidamente cu-
ando el adaptador de telfono est listo para su uso. CONFIGURACIN DEL HT818 El HT818 puede ser configurado ya sea mediante el Web GUI integrado utilizando el navegador Web en su PC o usando el men de mensajes de voz IVR. Obteniendo la direccin IP El HT818 est configurado por defecto para obtener la direccin IP des-
de un servidor DHCP donde se encuentre la unidad. Para saber que direccin IP es asignada a su HT818, usted debera ingresar al Men Interactivo de Respuesta por Voz de su adaptador por medio del tel-
fono conectado y comprobar su modo de direccin IP. Por favor consulte los pasos abajo para acceder al men interactivo de respuesta por voz:
1. Use un telfono conectado a los Phone puertos 1- 8 de su HT818 2. Presione *** (presione la tecla estrella tres veces) para acceder al men IVR y espere hasta que escuche Enter the menu option. 3. Presione 02 y ser anunciada la direccin IP actual. Configure usando Web UI 1. Conecte la computadora a la misma red de su HT818 y asegrese de que el HT818 haya arrancado. 2. Usted puede comprobar la direccin IP del HT818 usando el IVR me-
diante el telfono conectado. 3. Abra su navegador Web en su computadora. 4. Ingrese la direccin IP del HT818 en la barra de direccin del navega-
dor. 5. Ingrese la contrasea de administrador para ingresar el men de con-
figuracin Web. (Por defecto la contrasea de administrador es admin). Nota: La computadora debe estar conectada a la misma sub red del HT818. Esto se puede hacer fcilmente conectando la computadora al mismo hub o switch donde se encuentra el HT818. Para instrucciones de configuracin ms detalladas, descargue el man-
ual del usuario y las P+F: http://www.grandstream.com/our-products 11 12 Le HT818 nest pas prconfigur pour prendre en charge ou acheminer les appels durgence adresss aux hpi-
taux, organismes chargs de lapplication de la loi, cen-
tres de soins mdicaux ( service(s) durgence ) ou tout autre type de service durgence. Vous devez prendre des dispositions supplmentaires pour assurer laccs aux services durgence. Il est de votre responsabilit de vous abonner un service de tlphonie Internet con-
forme au protocole SIP, de configurer correctement le HT818 pour utiliser ce service, et de tester priodique-
ment votre configuration pour vous assurer quelle fonc-
tionne comme prvu. Si vous ne le faites pas, vous de-
vez vous abonner un service de tlphonie sans fil ou fixe traditionnel pour accder aux services durgence. GRANDSTREAM NE FOURNIT PAS DE CONNEX-
IONS AUX SERVICES DURGENCE VIA LE HT818. NI GRANDSTREAM, NI SES DIRIGEANTS, EMPLOY-
ES OU SOCIETES AFFILIEES NE PEUVENT ETRE TENUS RESPONSABLES POUR TOUTE RECLA-
MATION, TOUT DOMMAGE OU PERTE, ET VOUS RENONCEZ PAR LES PRESENTES A TOUTE REC-
LAMATION OU TOUT MOTIF DACTION EN JUS-
TICE DCOULANT OU LIE A VOTRE INCAPACITE DUTILISER LE HT818 POUR CONTACTER LES SERVICES DURGENCE, ET TOUTE NEGLIGENCE DE VOTRE PART QUANT A PRENDRE DES DIS-
POSITIONS SUPPLEMENTAIRES POUR ACCEDER AUX SERVICES DURGENCE CONFORMMENT LALINA PRCDENT. FR 13 PRESENTATION Le HT818 est une passerelle VoIP de pointe 8 ports (ATA) avec 8 ports FXS et un routeur Gigabit NAT intgr. Construit et bas sur la technolo-
gie Grandstream de passerelle SIP ATA, leader sur le march avec des millions dunits dployes avec succs dans le monde, ce puissant ATA dispose dune qualit vocale exceptionnelle dans divers environne-
ments applicatifs, du cryptage renforc avec certificat de scurit unique par unit, de lapprovisionnement automatis pour le dploiement du volume et de la gestion de lappareil, et de fonctionnalits de rseau remarquables pour la maison et le bureau. PRECAUTIONS Ne tentez pas douvrir, de dmonter ou de modifier lappareil. Nutilisez pas un adaptateur de courant tiers. Nexposez pas cet appareil des tempratures situes hors de la plage de -10 C +60 C. Nexposez pas le HT818 des environnements o le niveau dhumidit est situ hors de la plage dhumidit suivante : 10 90 % HR (sans con-
densation). Ne mettez jamais le HT818 sous tension au cours du dmarrage du systme ou de la mise niveau du microprogramme. Vous risqueriez de corrompre le fichier image du microprogramme et causer des dys-
fonctionnements. CONTENU DU PACK 12 V 1 x HT818 1 x Adaptateur dalimentation 12V 1 x Cble Ethernet 1 x Guide dInstallation Rapide 1 x Licence GPL 14 PORTS DU HT818 Port Description Prise dalimentation. Utilis pour alimenter le HT818 (12V - 1.5A) Port LAN Rseau . Utilis pour connecter votre HT818 au rseau local lors de lutilisation en tant que routeur. Port rseau. Utilis pour connecter le HT818 votre routeur ou passerelle laide dun cble Eth-
ernet RJ45. tlphones Ports FXS pour connecter des analogiques / tlcopieurs ladaptateur de tl-
phone laide dun cble tlphonique RJ-11. Bouton de rinitialisation. Appuyez pendant 7 sec-
ondes pour rinitialiser les paramtres dusine. CONNEXION DU HT818 Le HT818 est conu pour une configuration et une installation facile, pour connecter votre HT818, veuillez suivre les tapes ci-dessous :
1. Insrez un cble tlphonique RJ11 dans le port de tlphone et branchez lautre extrmit du cble tlphonique dans un tlphone analogique standard. 2. Insrez le cble ethernet dans le port LAN de la HT818 et connectez lautre extrmit du cble dans le port de votre routeur ou modem, etc 3. Insrez ladaptateur dans le HT818 et branchez-le une prise murale. 4. Les voyants de lalimentation, Ethernet et tlphone seront solide-
ment allumes lorsque ladaptateur de tlphone est prt lemploi. CONFIGURATION DU HT818 Le HT818 peut tre configur soit en utilisant linterface graphique Web partir dun navigateur internet ou bien en utilisant le menu interactif
(IVR). Obtention de ladresse IP Le HT818 est par dfaut configur pour obtenir ladresse IP partir du serveur DHCP o se trouve lunit. Afin de savoir quelle adresse IP est attribue votre HT818, vous devez accder au Menu de rponse vocale interactive de votre adaptateur via le tlphone connect et v-
rifier son mode dadresse IP. Veuillez suivre les tapes ci-dessous pour accder au menu de rponse vocale interactive :
1. Utiliser un tlphone connect aux ports Tlphone 1- 8 de votre HT818. 2. Appuyez sur *** (appuyez sur la touche toile trois fois) pour accder au menu IVR et attendre jusqu ce que vous entendiez Entrez loption de menu . 3. Appuyez sur 02 et ladresse IP actuelle sera annonce. Configuration laide de linterface utilisateur Web 1. Connectez lordinateur au mme rseau que votre HT818 et assurez-
vous que le HT818 est allum. 2. Vous pouvez vrifier ladresse IP de votre HT818 sur le tlphone connect laide de lIVR. 3. Ouvrez le navigateur Web sur votre ordinateur. 4. Entrez ladresse IP de votre HT818 dans la barre dadresse du navi-
gateur. 5. Entrez le mot de passe administrateur pour accder au Menu de Con-
figuration Web. (Par dfaut le mot de passe pour ladministrateur est:
admin). Note: Lordinateur doit tre connect au mme rseau que le HT818. Ceci peut tre facilement fait en branchant lordinateur sur le mme con-
centrateur ou commutateur comme le HT818. Veuillez tlcharger le manuel dutilisation et la FAQ pour obtenir des instructions de configuration plus dtailles :http://www.grandstream. com/our-products 15 16 DE 17 Im HT818 sind keine Notfallrufnummern voreingestellt oder vorkonfiguriert. Das HT818 ttigt keine automa-
tischen Anrufe zu medizinischen, sozialen oder ju-
ristischen Hilfs- oder Serviceorganisationen. Die An-
bindung an derartige Einrichtungen muss separat eingestellt bzw. zur Verfgung gestellt werden. Es liegt in der Verantwortung des Nutzers, einen SIP-
konformen Internet-Telefon-Service zu buchen, der die Nutzung der rtlichen und berregionalen Notrufnum-
mern sicherstellt. Bietet der SIP-Anbieter diesen Ser-
vice nicht, liegt es in der Verantwortung des Nutzers, einen analogen bzw. alternativen Telefonanschluss zustzlich bereit zu stellen, um eine telefonische fr Notflle sicherstellen zu knnen. Anbindung GRANDSTREAM STELLT MIT DEM HT818 KEINE VERBINDUNG ZU NOTFALLRUFNUMMER ODER DIE ANBINDUNG AN NOTFALLZENTREN ZUR VERFGUNG. WEDER GRANDSTREAM, NOCH GRANDSTREAM MITARBEITER, ANGESTELLTE ODER SONSTIGE FIRMEANGEHRIGE SIND FR DIE ANDBINDUNG DES HT818 AN EINEN MED-
IZINISCHEN SERVICE ODER ANDEREN NOTFALL-
DIENST ZUSTNDIG, BZW. VERANTWORTLICH.ES OBLIGT ALLEINIG IN DER VERANTWORTUNG DER HT818 NUTZER BZW. DER HT818 BESITZER, FR EINE NETZANBINDUNG ZU SORGEN, WELCHE DIE NUTZUNG VON MEDIZINISCHEN ODER ANDEREN NOTFALLRUFNUMMERN SICHERSTELLT. BERBLICK Der HT818 ist ein leistungsstarkes 8-Port VoIP Gateway mit 8 FXS Ports und integrierten Gigabit-NATRouter. Basierend auf Grandstreams marktfhrender SIP/ATA-Gateway-Technologie, die weltweit in unzhli-
gen Installationen Anwendung findet, bietet dieser ATA ein hervorragen-
des Funktions- sowie Ausstattungsspektrum und die, fr Grandstream typische, sehr hohe Sprachqualitt. Die umfangreiche Sicherheitsau-
sstattung, wie beispielsweise unique security certificate/unit sowie die umfangreichen Management- und Provisionierungsmglichkeiten prdestinieren Grandstream ATAs fr unterschiedlichste Anwend-
ungsszenarien SICHERHEITSHINWEISE Versuchen Sie nicht, das Gert zu ffnen, auseinanderzunehmen oder abzundern Verwenden Sie kein Netzteil eines Drittanbieters Setzen Sie dieses Gert keinen Temperaturen unter -10 C oder ber
+60 C aus Setzen Sie den HT818 keiner Umgebung mit einer relativen Luft-
feuchtigkeit unter 10 % oder ber 90 % (nicht kondensierend) aus Schalten Sie den HT818 beim Systemstart oder bei der Firmware-Ak-
tualisierung NICHT aus und wieder ein. Andernfalls knnen Firmware-
Bilder beschdigt werden und es knnten Funktionsstrungen am Gert auftreten. LIEFERUMFANG 12 V 1 x HT818 1 x 12V Netztell 1 x Ethernet Kabel 1 x Kurzinstallationsanleitung 1 x GPL Erklrung 18 HT818 ANSCHLSSE Port Beschreibung Stromanschluss. Hierber wird der HT818 mit Strom (12V-1.5A) versorgt. Netzwerk LAN-Port. Zum Anschlu des HT818 an das lokale Netzwerk wenn der HT818 als Router genutzt wird Netzwerk-Port. Nutzen Sie bitte ein RJ45 Ether-
netkabel, um den HT818 an den Router oder an ein Gateway anzuschlieen. FXS-Port (analoger Anschlu) zum Anschlu eines analogen Telefons oder eines Faxgertes mit einem RJ-11 Kabel. Reset-Taste. Drcken Sie die Taste min. 7 Sekun-
den um das Gert auf Werkseinstellungen zurck-
zusetzen. ANSCHLIESSEN DES HT818 Der HT818 ist sehr einfach zu installieren und zu konfigurieren, fhren Sie hierzu folgende Schritte durch:
1. Verbinden Sie via RJ-11 Kabel den Telefon-Port des HT818 mit einem Standard analogen Telefon. 2. Verbinden Sie via Ethernetkabel den LAN-Port des HT818 mit dem Netzwerk-Port am Router oder Modem, ect. 3. Verbinden Sie den Stromanschlu am HT818 mit der Steckdose, be-
nutzen Sie hierzu nur das mitgelieferte Netzteil. 4. Die LED Anzeigen fr Strom, Ethernet und Phone (Telefon) leuchten konstant, sobald alle Verbindungen richtig gesteckt sind. Der HT818 ist nun einsatzbereit. 19 KONFIGURATION DES HT818 Der HT818 kann entweder ber die Web-Schnittstelle, oder das IVR Sprachmen konfiguriert werden. Bezug der IP-Adresse Die voreingestellte Konfiguration im HT818 bezieht die IP-Adresse vom lokalen DHCPServer. Nutzen Sie bitte das analoge Telefon, um ber das Interactive-Voice-Response Men die aktuelle IP-Adresse des HT818 zu erhalten. ber die nachfolgenden Schritte gelangen Sie zum Interac-
tive-Voice-Response Men. 1. Verbinden Sie ein analoges Telefon mit dem Port Phone 1- 8 am HT818. 2. Drcken Sie dreimal hintereinander die * Taste (***), um in das Men zu gelangen und warten Sie, bis zur akustischen Aufforderung: Enter the menu Option. 3. Drcken Sie 02 und die IP-Adresse wird Ihnen angesagt Konfiguration ber die Web-Schnittstelle 1. Verbinden Sie Ihren PC in das selbe Netzwerk wie den HT818 und stellen Sie sicher, das der HT818 gestartet ist. 2. Prfen Sie die IP-Adresse des HT818 ber das Interactive-Voice-Re-
sponse Men am angeschlossenen Telefon. 3. ffnen Sie den Web-Browser an Ihrem PC. 4. Geben Sie die IP-Adresse des HT818 in das Adressfeld im Web-
Browser ein. 5.Geben Sie das Administratoren-Passwort ein, um Zugang zum Kon-
figurationsmen zu erhalten (Voreingestelltes Passwort ist admin). Hinweis: Achten Sie bitte darauf, dass sich der PC im selben Sub-Netz wie der HT818 befindet. Das kann ganz einfach sichergestellt werden, indem Sie den PC und den HT818 am selben Hub oder Switch an-
schlieen. Ausfhrliche Konfigurationsanweisungen finden Sie in der herunterlad-
baren Bedienungsanleitung und in den Antworten zu hufig gestellten Fragen (FAQ) auf der folgenden Website: http://www.grandstream.com/
our-products 20 HT818 non preconfigurato per supportare o effettu-
are chiamate di emergenza a qualsiasi tipo di osped-
ale, struttura giudiziaria, unit di assistenza medica
(Servizi di emergenza) o a qualsiasi altro tipo di ser-
vizio di emergenza. necessario effettuare accordi supplementari per accedere ai Servizi di emergenza. E a Vostra esclusiva responsabilit acquistare servizi di telefonia internet conformi con SIP, configurare HT818 correttamente per usare tale servizio ed effet-
tuare test periodici della configurazione per assicurarsi che funzioni in modo idoneo. Se non si effettua ci, Vostra responsabilit acquistare servizi telefonici fissi o wireless tradizionali per accedere ai Servizi di emer-
genza. GRANDSTREAM NON FORNISCE COLLEGAMENTI AI SERVIZI DI EMERGENZA ATTRAVERSO HT818. N GRANSTREAM N I SUOI RESPONSABILI, DI-
PENDENTI O AFFILIATI POSSONO ESSERE RITE-
NUTI RESPONSABILI DI QUALSIASI RECLAMO, DANNO O PERDITA, E DI QUALSIASI AZIONE LE-
GALE DERIVANTE DA TALI RECLAMI O CAUSE IN RELAZIONE ALLIMPOSSIBILIT DI USARE IL HT818 PER CHIAMATE AI SERVIZI O DI STRING-
ERE ACCORDI SUPPLEMENTARI PER ACCEDERE AI SERVIZI DI EMERGENZA IN CONFORMIT AL PARAGRAFO PRECEDENTE. IT 21 PANORAMICA HT818 un gateway VoIP a 8 porte avanzato con 8 porte FXS e con un router NAT Gigabit integrato. Costruito sulla tecnologia SIP ATA/
gateway leader di mercato di Grandstream con milioni di unit installate con successo in tutto il mondo, questo potente ATA offre uneccezionale qualit audio in diversi ambienti applicativi, crittografia forte con certifi-
cato di sicurezza esclusivo per unit, provisioning automatizzato per la distribuzione del volume e per la gestione dei dispositivi ed eccezionali prestazioni di rete per uso domestico o di ufficio. PRECAUTIONS Do not attempt to open, disassemble, or modify the device. Do not use a third party power adapter. Do not expose this device to temperatures outside range of -10 C to
+60 C. Do not expose the HT818 to environments outside of the following humidity range: 10-90% RH (non-condensing). Do NOT power cycle the HT818 during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to mal-
function. CONTENUTO DELLA CONFEZIONE 12 V 1 x HT818 1 x Alimentatore 12V 1 x Cavo Ethernet 1 x Guida di avvio rapido 1 x GPL Licenza 22 PORTE HT818 Port Description Porta di alimentazione. Usata per alimentare il HT818 (12V - 1.5A) Porta di rete LAN. Usato per collegare il HT818 alla rete locale quando si usa come router Porta di rete. Usato per collegare il HT818 al tuo router o gateway usando un cavo Ethernet RJ45. Porte FXS per collegare telefoni / fax analogici alladattatore telefonico usando un cavo telefonico RJ-11. Pulsante ripristino di fabbrica. Premere per 7 secondi per ripristinare le impostazioni predefinite di fabbrica. CONNESSIONE DEL HT818 LHT818 concepito per semplice configurazione e semplice installazi-
one, per collegare il proprio HT818, seguire i passi seguenti:
1. Inserire un cavo telefonico standard RJ11 nella porta telefonica e col-
legare laltra estremit del cavo telefonico a un telefono analogico a toni standard. 2. Inserire il cavo ethernet nella porta internet o LAN dellHT818 e col-
legare laltra estremit del cavo ethernet a una porta uplink (un router o un modem ecc.) 3. Inserire lalimentatore nellHT818 e collegarlo alla presa a muro. 4. Il LED Alimentazione, Ethernet e Telefono saranno accesi fissi quan-
do ladattatore telefonico pronto per luso. CONFIGURAZIONE DEL HT818 LHT818 pu essere configurato usando il GUI Web integrato usando il GUI Web integrato usando il browser web del PC o usando il menu di avviso vocale IVR. Ottenimento dellindirizzo IP LHT818 come impostazione predefinita configurato per ottenere lindirizzo IP dal server DHCP dove si trova lunit. Al fine di conoscere lindirizzo IP assegnato al proprio HT818, necessario accedere al Menu di risposta vocale interattivo del proprio adattatore mediante il telefono collegato e verificare la sua modalit di indirizzo IP. Fare riferimento ai passi seguenti per accedere al menu di risposta vo-
cale interattivo:
1. Utilizzare un telefono collegato alle porte telefoniche 1- 8 dellHT818. 2. Premere *** (premere il tasto asterisco tre volte) per accedere al menu IVR e attendere fino a quando non si sente Immettere lopzione menu. 3. Premere 02 e lindirizzo IP corrente sar annunciato. Configurare usando UI Web 1. Collegare il computer alla stessa rete del proprio HT818 e assicurarsi che lHT818 sia riavviato. 2. possibile verificare lindirizzo IP dellHT818 usando lIVR sul telefono collegato. 3. Aprire il browser web sul proprio computer. 4. Immettere lindirizzo IP dellHT818 nella barra dellindirizzo del brows-
er. 5. Immettere la password dellamministratore per accedere al menu di configurazione web. (Come impostazione predefinita la password am-
ministratore admin) Nota: Il computer deve essere collegato alla stessa sottorete dellHT818. Ci pu essere effettuato facilmente collegando il computer allo stesso hub o switch dellHT818. Scaricare il manuale duso e le domande frequenti per ulteriori istruzioni di configurazione dettagliate: http://www.grandstream.com/our-products 23 24
, HT818
. SIP-
HT818 ,
. GRANDSTREAM HT818. GRANDSTREAM,
, HT818
. RU 25 SIP /
HT818 VoIP 8 FXS NAT . Gran stream ,
-10 C +60 C HT818
: 10-90% -
() HT818
. 12 V 1 x HT818 1 x 12 1 x Ethernet 1 x 1 x GPL 26 HT818
. HT818
(12V - 1.5A) LAN
. HT818
. HT818 Ethernet RJ45. FXS
RJ-11 7
. HT818 HT818 , HT818, , :
1. RJ11
. 2. Ethernet- LAN HT818
( ..) 3. HT818
. 4. , Power (), Ethernet Phone ()
. 27 HT818 HT818 IVR. IP-
HT818 IP- DHCP-
, . IP-
HT818, IVR IP-. IVR :
1. phone 1 - 8 HT818. 2. *** ( ) IVR . 3. 02, IP-. 1. , HT818 , HT818 . 2. IP- HT818 IVR
. 3. . 4. IP- HT818 . 5. ( - admin)
: , HT818.
, HT818.
: http://www.grandstream.com/our-products 28 O HT818 no pr-configurado para suportar ou reali-
zar chamadas de emergncia a qualquer tipo de hos-
pital, agncia policial, unidade de atendimento mdico
(Servio (s) de emergncia), ou qualquer outro tipo de servio de emergncia. Voc dever tomar providn-
cias adicionais para acessar servios de emergncia. da sua responsabilidade adquirir servio de telefonia via Internet compatvel com o protocolo SIP, configurar corretamente o HT818 para usar esse servio e peri-
odicamente testar a configurao para confirmar que ele funciona como voc espera. Se voc no fizer isso, da sua responsabilidade adquirir os servios tradicionais de telefones celulares ou fixos para aces-
sar servios de emergncia. GRANDSTREAM NO FORNECE CONEXES A SERVIOS DE EMERGNCIA ATRAVS DO HT818. NEM GRANDSTREAM, NEM OS SEUS DIRIGEN-
TES, EMPREGADOS OU AFILIADOS PODEM SER RESPONSVEIS POR QUALQUER RECLAMAO, DANO OU PERDA, E VOC, NESTE ATO, RENUN-
CIA QUAISQUER E TODAS REIVINDICAES OU MOTIVOS DE ACO RESULTANTES DA OU REL-
ATIVA SUA INCAPACIDADE DE USAR O HT818 PARA CONTATAR SERVIOS DE EMERGNCIA E POR NO FAZER ARRANJOS ADICIONAIS PARA ACEDER AOS SERVIOS DE EMERGNCIA, SE-
GUNDO O PARGRAFO IMEDIATAMENTE ANTE-
RIOR. PT 29 RESUMO O HT818 um avanado gateway VoIP com 8 portas FXS e um roteador NAT Gigabit integrado. Desenvolvido com a tecnologia de gateway/ATA SIP lder do setor da Grandstream, com milhes de unidades implemen-
tadas no mundo inteiro, esse ATA avanado oferece qualidade de voz excepcional em vrios ambientes, forte criptografia com um certificado de segurana exclusivo para cada unidade, provisionamento automa-
tizado para implementao em massa e gerenciamento de dispositivos, alm de excelente desempenho de rede para uso residencial e empre-
sarial. PRECAUES No tente abrir, desmontar, ou modificar o dispositivo. No exponha este dispositivo a temperaturas fora do intervalo de -10 C at +60 C. No exponha este dispositivo em ambientes com umidade fora do intervalo: 10-90% HR (sem condensao). No desligue e ligue a energia do HT818 durante o reinicio do sistema ou durante a atualizao de firmware. Voc pode corromper o firmware e causar a avaria do dispositivo CONTEDO DO PACOTE 12 V 1 x HT818 1 x 12V Adaptador de Corrente 1 x Cabo de Ethernet 1 x Guia de Instalao Rpido 1 x licena GPL 30 PORTAS DO HT818 CONFIGURAO DO HT818 Porta Descrio Porta de alimentao. Utilizada para alimentar o HT818 (12V - 1.5A). Porta de rede LAN. Usado para conectar seu HT818 a rede local ao usar como router. Porta de rede. Utilizada para conectar o HT818 ao seu roteador ou gateway utilizando um cabo eth-
ernet RJ45. Portas FXS para conectar os telefones analgicos
/ maquinas de fax ao adaptador telefnico utilizan-
do cabo de telefone RJ-11 Tecla de reset de fbrica. Pressionar durante 7 segundos para restabelecer as configuraes aos padres de fbrica. CONECTANDO-SE AO HT818 O HT818 est concebido para uma fcil instalao e configurao, para conectar o seu HT818, por favor siga as indicaes acima:
1. Insira o cabo telefnico RJ11 na porta para telefone e conecte a outra ponta do cabo telefnico em um telefone analgico tradicional. 2. Insira o cabo ethernet na porta de internet ou LAN do HT818 e co-
necte a outra ponta do cabo na porta do roteador, modem, etc. 3. Insira o adaptador de energia no HT818 e conecte-o em uma tomada de corrente. 4. Os LEDs Power, Ethernet e Phone estaro ligadas fixas quando o adaptador telefnico estiver pronto para utilizar. O HT818 pode ser configurado tanto via interface Web atravs do navegador no PC ou utilizando o menu de voz interno (URA) Obtendo endereo IP O HT818 esta configurado de fbrica para obter o endereo IP a partir do servidor DHCP da localidade onde o dispositivo est instalado. Para saber qual o endereo IP que tem o seu HT818, voc deve acessar ao menu de voz interno (URA) do seu adaptador atravs do telefone conectado e verificar a modalidade do endereo IP. Por favor consulte o procedimento abaixo para acessar o menu de voz interno (URA):
1. Utilize o telefone conectado porta phone 1- 8 do seu HT818. 2. Digite *** (digite trs vezes a tecla estrela) para acessar ao menu URA e aguarde at ouvir Enter the menu option. 3. Digite 02 e o endereo IP atual ser reproduzido Configure o HT818 utilizando a interface web 1. Conecte o computador mesma rede do seu HT818 e verifique que o HT818 est ligado. 2. Voc pode obter o endereo IP do seu HT818 utilizando o menu URA interno atravs do telefone conectado. 3. Abrir o navegador web no computador. 4. Insira o endereo IP do seu HT818 na barra de endereo do navega-
dor. 5. Digite a senha de administrador para acessar ao menu web de con-
figuraes. (Por padroa senha de administrador admin) Aviso: O computador deve estar conectado na mesma sub-rede onde est conectado o HT818. Isto pode ser feito de maneira simples co-
nectando o computador no mesmo hub ou switch onde est conectado o HT818. Para o manual de usurio detalhado, faa o download de: http://www. grandstream.com/our-products 31 32 PL 33 Urzdzenie HT818 nie jest wstpnie skonfigurowane do obsugi lub wykonywania pocze alarmowych do szpitali, organw ochrony porzdku publicznego, jed-
nostek opieki medycznej (zwanych dalej subami ratunkowymi) ani innych sub ra-
jakichkolwiek tunkowych. Aby uzyska dostp do sub ratunkowych, konieczne jest wprowadzenie dodatkowych ustawie. Uytkownik jest odpowiedzialny za zakup usugi telefo-
nii internetowej zgodnej z protokoem SIP, odpowiedni konfiguracj urzdzenia HT818 umoliwiajc ko-
rzystanie z tej usugi oraz okresowe testy konfiguracji w celu sprawdzenia, czy dziaa ona zgodnie zoczeki-
waniami. W przypadku niewykonania tych czynnoci uytkownik jest odpowiedzialny za zakup tradycyjnych bezprzewodowych lub przewodowych usug telefonic-
znych w celu uzyskania dostpu do sub ratunkowych. FIRMA ZAPEWNIA MOLIWOCI POCZENIA ZE SUBAMI RA-
TUNKOWYMI ZA POREDNICTWEM URZDZENIA HT818. FIRMA GRANDSTREAM, JEJ KIEROWNIC-
TWO, PRACOWNICY ANI PODMIOTY STOWAR-
ZYSZONE NIE MOG BY POCIGNITE DO ODPOWIEDZIALNOCI ZTYTUU JAKICH- KO WIEK ROSZCZE, SZKD LUB STRAT, A UYTKOWNIK NINIEJSZYM ZRZEKA SI WSZEL- KICH TEGO TYPU ROSZCZE I PODSTAW POW- DZ-
TWA WYNIKAJCYCH LUB POWIZANYCH Z NIEMONOCI UYCIA URZDZENIA HT818 W CELU NAWIZANIA KONTAKTU ZE SUBAMI RA-
TUNKOWYMI I NIEWPROWADZENIEM DODAT-
KOWYCH USTAWIE UMOLIWIAJCYCH UZYS-
KANIE DOSTPU DO SUB RATUNKOWYCH INFORMACJAMI W POPRZEDNIM ZGODNIE Z AKAPICIE. GRANDSTREAM NIE INFORMACJE OGLNE Urzdzenie HT818 jest zaawansowan bram VoIP z czterema por-
tami FXS oraz zintegrowanym routerem Gigabit NAT. Zostao ono st-
worzone na bazie wiodcej na rynku technologii bram/adapterw ATA SIP firmy Grandstream. Miliony takich urzdze pomylnie wdroono na caym wiecie. Ten wydajny adapter ATA charakteryzuje si wyjtkow jakoci dwiku w rnych zastosowaniach, wydajnym szyfrowaniem przy uyciu unikatowych dla kadego urzdzenia cer-
tyfikatw bezpieczestwa, funkcj automatycznej konfiguracji zdalnej umoliwiajc masowe wdroenie i zarzdzanie urzdzeniami, a take wyjtkowo wydajnymi funkcjami sieciowymi do zastosowa w domu i w biurze. RODKI OSTRONOCI Urzdzenia nie wolno otwiera, rozmontowywa lub modyfikowa. Nie wolno uywa zasilacza innych firm. Nie wystawiaj urzdzenia na dziaanie temperatury poza podanym za-
kresem: -10C do +60C Nie wystawiaj urzdzenia na dziaanie wilgotnoci poza podanym za-
kresem: 10-90% RH (nie skondensowanej). NIE wyczanie zasilania HT818 podczas system zyski w grze albo uaktualnienie oprogramowania ukadowego. Moe uszkodzi opro-
gramowanie ukadowe i spowodowa nieprawidowe dziaanie. ZAWARTO OPAKOWANIA 12 V 1 x HT818 1 x zasilacz 12V 1 x Kabel Ethernet 1 x Przewodnik szybkiej instalacji 1 x Licencja GPL 34 PORTY URZDZENIA HT818 KONFIGURACJA HT818 Port Opis Gniazdo zasilania. Suy do zasilania urzdzenia HT818 (12V 1,5 A). Port sieci LAN . Suy do podczenia HT818 do sieci lokalnej przy uyciu jako router. Port sieciowy. Suy do poczenia urzdzenia HT818 z ruterem lub bram przy uyciu kabla typu Ethernet RJ45. Porty FXS do poczenia telefonw analogowych
/ faksw do adaptera telefonu przy uyciu kabla telefonicznego RJ-11. Przycisk przywracania ustawie fabrycznych. Przytrzyma przez 7 sekund, aby przywrci domylne ustawienia fabryczne PODCZANIE HT818 Urzdzenie HT818 zaprojektowano z myl o atwej konfiguracji i insta-
lacji. Aby podczy urzdzenie HT818, postpuj zgodnie z powyszymi krokami:
1. W standardowy kabel telefoniczny RJ11 do portu telefonicznego i podcz drugi koniec kabla telefonicznego do standardowego telefonu analogowego z wybi-
eraniem tonowym. 2. W kabel Ethernet do portu internetowego lub LAN urzdzenia HT818 i podcz drugi koniec kabla Ethernet do portu uplink (routera, modemu itp.) 3. Podcz zasilacz do urzdzenia HT818, a nastpnie do gniazdka ciennego. 4. Diody LED zasilania, Ethernet oraz telefonu zawiec si wiatem staym, gdy adapter telefonu bdzie gotowy do uycia. 35 Urzdzenie HT818 mona skonfigurowa przy uyciu wbudowanego interfejsu sieciowego (web GUI) za porednictwem przegldarki inter-
netowej w komputerze lub przy uyciu interaktywnego menu gosowego. Uzyskiwanie adresu IP Urzdzenie HT818 jest domylnie skonfigurowane do pozyskiwania adresu IP z serwera DHCP w lokalizacji urzdzenia. Aby dowiedzie si, ktry adres IP jest przypisany do urzdzenia HT818, naley wej do interaktywnego menu gosowego adaptera za porednictwem podczonego telefonu i sprawdzi adres IP. Ponisze kroki opisuj procedur dostpu do interaktywnego menu gosowego:
1. Uyj telefonu podczonego do portu telefonicznego 1- 8 urzdzenia HT818. 2. Nacinij trzykrotnie przycisk gwiazdki, aby uzyska dostp do interak-
tywnego menu gosowego i poczekaj, a usyszysz polecenie Enter the menu option (Wprowad opcj menu). 3. Nacinij 02, aby usysze aktualny adres IP. Konfiguracja przy uyciu interfejsu sieciowego 1. Podcz komputer do tej samej sieci co urzdzenie HT818 i upewnij si, e urzdzenie HT818 jest uruchomione. 2. Adres IP urzdzenia HT818 mona sprawdzi, korzystajc z interakty-
wnego menu gosowego w poczonym telefonie. 3. Otwrz przegldark internetow na komputerze. 4. Wpisz adres IP urzdzenia HT818 w pasku adresu przegldarki. 5. Wprowad haso administratora, aby uzyska dostp do menu kon-
figuracji sieciowej.(Domylne haso administratora to: admin) Uwaga: Komputer musi by poczony z t sam podsieci co urzdzenie HT818. Mona to atwo wykona, podczajc komputer do tego samego koncentratora lub przecznika sieciowego co urzdzenie HT818. Instrukcj obsugi oraz FAQ mona znale na stronie: http://www. grandstream.com/our-products 36
1 | ID label and location | ID Label/Location Info | 1.08 MiB | March 10 2022 |
59.8 mm 5 Model: HT818 Input: 12V 1.5A This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B) FCC ID: YZZHT818CS Made in China m m 8
. 1 3 Label location
1 | Confidentiality | Cover Letter(s) | 149.67 KiB | March 10 2022 |
C5266091_X10_Ed.1
< Grandstream Networks, Inc. >
Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date:2022/2/25 Subject: Request for Confidentiality FCC ID: YZZHT818CS To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules
(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No No Short-Term Confidentiality No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:
Name: Ning Wei Title: Manager 1/1
1 | Letter Authorization | Cover Letter(s) | 147.66 KiB | March 10 2022 |
C5266091_X8_Ed.1 Letter of Authorization
< Grandstream Networks, Inc. >
Company: Grandstream Networks, Inc. Address: 126 Brookline Ave., 3rd Floor Boston, MA 02215, USA Product Name: Analog Telephone Adaptor Model Number: HT818 FCC Identifier: YZZHT818CS We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Ning Wei Title: Manager Signature of applicant:
Date: 2022.2.25 1/1
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-03-10 | JAB - Part 15 Class B Digital Device | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2022-03-10
|
||||
1 | Applicant's complete, legal business name |
Grandstream Networks, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0020352431
|
||||
1 | Physical Address |
126 Brookline Ave, 3rd Floor
|
||||
1 |
Boston, MA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
e******@applus.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
YZZ
|
||||
1 | Equipment Product Code |
HT818CS
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
N**** W******
|
||||
1 | Telephone Number |
1-617********
|
||||
1 | Fax Number |
1-617********
|
||||
1 |
N******@grandstream.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Shenzhen UnionTrust Quality and Technology Co., Lt
|
||||
1 | Name |
B**** l******
|
||||
1 | Physical Address |
Shenzhen
|
||||
1 |
China
|
|||||
1 | Telephone Number |
0755-******** Extension:
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
b******@uttlab.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Shenzhen UnionTrust Quality and Technology Co., Lt
|
||||
1 | Name |
B****** l****
|
||||
1 | Physical Address |
Shenzhen
|
||||
1 |
China
|
|||||
1 | Telephone Number |
0755-******** Extension:
|
||||
1 | Fax Number |
0755-********
|
||||
1 |
b******@uttlab.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JAB - Part 15 Class B Digital Device | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Analog Telephone Adapter | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen UnionTrust Quality and Technology Co., Lt
|
||||
1 | Name |
G****** L****
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 |
q******@uttlab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC