FCC ID: YZZDP730 DECT Cordless HD Handset

Grandstream Networks, Inc. DP752/DP730/DP722 DECT VoIP System User Guide DP752 DECT VoIP Base Station DP730 DECT Cordless VoIP Phone DP722 DECT Cordless VoIP Phone COPYRIGHT 2018 Grandstream Networks, Inc. http://www.grandstream.com All rights reserved. Information in this document is subject to change without notice. Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. The latest electronic version of this user manual is available for download here:

http://www.grandstream.com/support Grandstream is a registered trademark and Grandstream logo is trademark of Grandstream Networks, Inc. in the United States, Europe and other countries. CAUTION Changes or modifications to this product not expressly approved by Grandstream, or operation of this product in any way other than as detailed by this User Manual, could void your manufacturer warranty. WARNING Please do not use a different power adaptor with your devices as it may cause damage to the products and void the manufacturer warranty. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 1 GNU GPL INFORMATION DP752 firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License

(GPL) for the exact terms and conditions of the license. Grandstream GNU GPL related source code can be downloaded from Grandstream web site from:

http://www.grandstream.com/support/faq/gnu-general-public-license/gnu-gpl-information-download DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 2 Table of Content DOCUMENT PURPOSE .................................................................................................... 9 CHANGE LOG ................................................................................................................. 10 Firmware Version 1.0.5.9 ........................................................................................................................ 10 GUI INTERFACE EXAMPLES ......................................................................................... 11 WELCOME ...................................................................................................................... 12 PRODUCT OVERVIEW ................................................................................................... 13 Feature Highlights ................................................................................................................................... 13 DP752 Technical Specifications .............................................................................................................. 14 DP730 Technical Specifications .............................................................................................................. 16 DP722 Technical Specifications .............................................................................................................. 18 GETTING STARTED ........................................................................................................ 20 Equipment Packaging ............................................................................................................................. 20 Connecting DP752 .................................................................................................................................. 22 Connecting via AC power ................................................................................................................ 22 Connecting via PoE ......................................................................................................................... 22 Setting up DP730/DP722 Handsets ....................................................................................................... 22 Battery Information .......................................................................................................................... 23 Setting up the Charge Station ................................................................................................................. 23 DP752 LED Patterns............................................................................................................................... 24 DP730/DP722 Handsets Description ...................................................................................................... 24 DP730/DP722 Icons Description ............................................................................................................ 27 DP730/DP722 Handsets Menu ............................................................................................................... 29 BASIC OPERATIONS ...................................................................................................... 35 Turning the Handsets ON / OFF ............................................................................................................. 35 Setup Wizard .......................................................................................................................................... 35 Register DP730/DP722 Handsets to DP752 Base Station..................................................................... 35 DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 3 Using DP730/DP722 with Multiple DP752 Base Stations ...................................................................... 36 Registering DP730/DP722 to an additional DP752 base station .................................................... 36 Switching Between Different Base Stations .................................................................................... 37 Unregister the DP730/DP722 ................................................................................................................. 37 Setting the Key Lock ............................................................................................................................... 38 Locating a DP730/DP722 Handset from DP752 Base station ............................................................... 39 Locate via DP752 Web UI ............................................................................................................... 39 Locate via DP752 Base station ....................................................................................................... 40 Checking System Status ......................................................................................................................... 40 Basic Network Settings ........................................................................................................................... 41 Change Menu and LCD Timeout ............................................................................................................ 42 Return to Idle Screen .............................................................................................................................. 42 Register SIP Account .............................................................................................................................. 42 Register Account via Web User Interface ........................................................................................ 42 PHONE SETTINGS.......................................................................................................... 45 Editing the Handset Name ...................................................................................................................... 45 Changing the Base PIN Code ................................................................................................................. 46 Selecting Phone Language ..................................................................................................................... 47 Activate/Deactivate Hands-Free Mode ................................................................................................... 48 Muting the Microphone ........................................................................................................................... 48 Adjusting Speaker and Earpiece Volume ............................................................................................... 48 Ringtones ................................................................................................................................................ 48 Setting the Ringer Volume on the Handsets ................................................................................... 48 Setting Ringtones on the Handsets ................................................................................................. 49 Advisory Tones ................................................................................................................................ 50 Ringtones Customization ................................................................................................................. 50 Date and Time ......................................................................................................................................... 53 Gestures (DP730 only) ........................................................................................................................... 53 Facedown Hangup........................................................................................................................... 54 Close-to-Ear Backlight ..................................................................................................................... 54 DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 4 Factory Functions ................................................................................................................................... 55 DP722/DP730 Handsets Firmware Upgrade .......................................................................................... 56 Reboot DP752 Base Station ................................................................................................................... 57 Reset DP722/DP730 Handsets .............................................................................................................. 57 CALL OPERATIONS ....................................................................................................... 59 Outgoing Default Line ............................................................................................................................. 59 Placing calls ............................................................................................................................................ 59 Make a Call using a Line ................................................................................................................. 59 Dialing from Call history ................................................................................................................... 60 Dialing from Phonebook .................................................................................................................. 61 Answering Calls ...................................................................................................................................... 61 Auto Answer ..................................................................................................................................... 61 Off-Cradle Pickup ............................................................................................................................ 62 Ending Calls ............................................................................................................................................ 62 On-Cradle Hang-up ......................................................................................................................... 63 Rejecting Calls ........................................................................................................................................ 63 Direct IP Call ........................................................................................................................................... 63 Call Hold/Resume ................................................................................................................................... 64 Call Waiting ............................................................................................................................................. 64 Do Not Disturb ........................................................................................................................................ 65 Call Forward ............................................................................................................................................ 66 Call Transfer ............................................................................................................................................ 66 Blind Transfer ................................................................................................................................... 66 Attended Transfer ............................................................................................................................ 67 Speed Dial .............................................................................................................................................. 67 3-Way Conference .................................................................................................................................. 68 Voice Mail ................................................................................................................................................ 68 Set Voice Mail Feature Code ........................................................................................................... 68 Play Voice Mail Messages ............................................................................................................... 69 PTT (Push-To-Talk) Key for DP730 ........................................................................................................ 70 DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 5 Call Features ........................................................................................................................................... 71 RESTORE FACTORY DEFAULT SETTINGS .................................................................. 72 EXPERIENCING DP752/DP722/DP730 .......................................................................... 73 DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 6 Table of Tables Table 1: DP752 Features at a Glance ............................................................................................................ 13 Table 2: DP730 Features at a Glance ............................................................................................................ 13 Table 3: DP722 Features at a Glance ............................................................................................................ 13 Table 4: DP752 Technical Specifications ....................................................................................................... 14 Table 5: DP730 Technical Specifications ....................................................................................................... 16 Table 6: DP722 Technical Specifications ....................................................................................................... 18 Table 7: Equipment Packaging DP752 ....................................................................................................... 20 Table 8: Equipment Packaging DP730 ....................................................................................................... 20 Table 9: Equipment Packaging DP722 ....................................................................................................... 21 Table 10: DP722/DP730 Battery Specifications ............................................................................................. 23 Table 11: DP752 LED Patterns ...................................................................................................................... 24 Table 12: Keypad Keys Description ............................................................................................................... 25 Table 13: Keypad Keys Description ............................................................................................................... 26 Table 14: DP730/DP722 Icons Description .................................................................................................... 27 Table 15: DP752 Info description ................................................................................................................... 40 Table 16: DP722/DP730 Info description ....................................................................................................... 40 Table 17: Call Features .................................................................................................................................. 71 DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 7 Table of Figures Figure 1: DP752 Package Content ................................................................................................................ 20 Figure 2: DP730 Package Content ................................................................................................................ 21 Figure 3: DP722 Package Content ................................................................................................................ 21 Figure 4: DP752 Back View ........................................................................................................................... 22 Figure 5: Setting up the DP730/DP722 .......................................................................................................... 23 Figure 6: Setting up Charging Stations .......................................................................................................... 24 Figure 7: DP752 LED Patterns ...................................................................................................................... 24 Figure 8: DP722 Keys Description ................................................................................................................. 25 Figure 9: DP730 Keys Description ................................................................................................................. 26 Figure 10: DP730/DP722 Menu Structure ..................................................................................................... 30 Figure 11: Registration Process ..................................................................................................................... 36 Figure 12: Multiple Base Stations Registration .............................................................................................. 36 Figure 13: Switching Between Base Stations ................................................................................................ 37 Figure 14: Unregister DP730/DP722 from DP752 web UI ............................................................................. 38 Figure 15: Locate Handsets via Web UI ........................................................................................................ 39 Figure 16: Network Settings Configuration .................................................................................................... 41 Figure 17: SIP Settings .................................................................................................................................. 43 Figure 18: SIP Accounts Settings................................................................................................................... 44 Figure 19: Account Status .............................................................................................................................. 44 Figure 20: Handsets Name editing ................................................................................................................ 45 Figure 21: Edit Handsets Name from DP752................................................................................................. 46 Figure 22: Changing Admin Base PIN Code from DP722/DP730 ................................................................. 46 Figure 23: Changing Admin Base PIN Code from DP752 ............................................................................. 47 Figure 24: Handsets Language ...................................................................................................................... 47 Figure 25: Ringer Volume .............................................................................................................................. 49 Figure 26: Advisory Tone ................................................................................................................................ 50 Figure 27: Generating Custom Ringtone (Windows) ..................................................................................... 51 Figure 28: Downloading Custom Ringtones .................................................................................................. 52 Figure 29: Date and Time Settings ................................................................................................................ 53 Figure 30: DP730 Gestures ........................................................................................................................... 54 Figure 31: DP730 Gestures Facedown Hangup ......................................................................................... 54 Figure 32: DP730 Gestures Close-to-Ear Backlight ................................................................................... 54 Figure 33: Factory Functions ......................................................................................................................... 56 Figure 34: Firmware Notification .................................................................................................................... 56 Figure 35: Firmware Upgrade ........................................................................................................................ 57 Figure 36: Rebooting the Base Station .......................................................................................................... 57 Figure 37: Resetting the Base Station ........................................................................................................... 58 Figure 38: Outgoing Default Line ................................................................................................................... 59 Figure 39: PTT Feature Enabled.................................................................................................................... 70 Figure 40: PTT Transmission ......................................................................................................................... 70 DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 8 DOCUMENT PURPOSE This document describes the basic concept and tasks necessary to use and configure your DP722/DP730 via the LCD menu and also using the DP752 base station. And it covers the handsets installation, basic operations and call features. Please visit http://www.grandstream.com/support to download the latest DP752/DP722/DP730 User Guide. This guide covers following topics:

Product Overview Getting Started Basic Operations Phone settings Call Operations Restore Factory Default Settings DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 9 CHANGE LOG This section documents significant changes from previous versions of user guide for DP752/DP722/DP730. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. Firmware Version 1.0.5.9 This is the initial version for DP752/DP730/DP722. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 10 GUI INTERFACE EXAMPLES http://www.grandstream.com/sites/default/files/Resources/DP752_web_gui.zip 1. Screenshot of Login Page 2. Screenshots of Status Pages 3. Screenshots of Profiles Pages 4. Screenshots of DECT Pages 5. Screenshots of Settings Pages 6. Screenshots of Maintenance Pages 7. Screenshots of Phonebook Pages DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 11 WELCOME Thank you for purchasing Grandstream DP752 DECT IP Base Station and DP722/DP730 DECT Handsets. The DP752 is a powerful DECT VoIP base station that pairs with up to 5 of Grandstreams DP722/DP730 DECT handsets to offer mobility to business and residential users. It supports a range of 300 meters outdoors and 50 meters indoors to give users the freedom to move around their work or home space, delivering efficient flexibility. This DECT VoIP base station supports up to 10 SIP accounts and 5 concurrent calls while also offering 3-way voice conferencing, full HD audio and integrated PoE. A shared SIP account on all handsets will add seamless unified features that gives users the ability to answer all calls regardless of location in real-

time. The DP752 supports a variety of auto-provisioning methods and TLS/SRTP/ HTTPS encryption security. When paired with Grandstreams DP722/DP730, the DP752 offers a powerful DECT VoIP base station that allows any business or residential user to create a cordless VoIP solution. The DP722/DP730 is a DECT cordless VoIP phone that allows users to mobilize their VoIP network throughout any business, warehouse, retail store and residential environment. It is supported by Grandstreams DP752 DECT VoIP base station and delivers a combination of mobility and top-notch telephony performance. Up to five DP722/DP730 handsets are supported on each DP752 while each DP722/DP730 supports a range of up to 300 meters outdoors and 50 meters indoors from the base station. The DP722/DP730 touts a suite of top-notch telephony features including support for up to 10 SIP accounts per handsets, full HD audio, a 3.5mm headset jack, multi-language support, a speakerphone and more. When paired with Grandstreams DP752 DECT Base Station, the DP722/DP730 offers a powerful DECT VoIP handsets that allows any business or residential user to create a cordless VoIP solution. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 12 PRODUCT OVERVIEW Feature Highlights The following tables contain the major features of the DP752 / DP730 / DP722:

DP752 Table 1: DP752 Features at a Glance 5 Handsets. 10 accounts. 10 Lines. 5 Concurrent calls. PoE power support. 300m range outdoor / 50m range indoor. Table 2: DP730 Features at a Glance DP730 DECT cordless HD. 2.4 inch (240x320) color TFT LCD 500 hours standby / 40 hours talk time. 15 languages embedded. 10 accounts. 10 lines. 5 ring modes. Table 3: DP722 Features at a Glance DP722 DECT cordless HD. 1.8 inch (128x160) color TFT LCD 250 hours standby / 20 hours talk time. 15 languages embedded. 10 accounts. 10 lines. 5 ring modes. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 13 DP752 Technical Specifications The following table resumes all the technical specifications including the protocols / standards supported, voice codecs, telephony features, languages and upgrade/provisioning settings for the Base station DP752. Table 4: DP752 Technical Specifications Air Interface Telephony standards: DECT Frequency bands:

1880 1900 MHz (Europe), 1920 1930 MHz (US) 1910 1920 MHz (Brazil), 1786 1792 MHz (Korea) 1893 1906 MHz (Japan), 1880 1895 MHz (Taiwan) Number of channels: 10 (Europe), 5 (US, Brazil or Japan), 3 (Korea), 8 (Taiwan) Range: up to 300 meters outdoor and 50 meters indoor Peripherals 3 LED indicators: Power, Network, DECT. Pairing/Paging button. Protocols/Standards SIP RFC3261, TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS One 10/100 Mbps auto-sensing Ethernet port with integrated PoE

(A record, SRV, NAPTR), DHCP, PPPoE, SSH, TFTP, NTP, STUN, SIMPLE, LLDP-

MED, LDAP, TR-069, 802.1x, TLS, SRTP Voice Codecs G.711/a-law, G.723.1, G.729A/B, G.726-32, iLBC, G.722, OPUS, G.722.2/AMR-

WB (special order), in-band and out-of-band DTMF (in audio, RFC2833, SIP INFO), VAD, CNG, PLC, AJB Telephony Features Hold, transfer, forward, 3-way conference, push to talk (DP730), intercom, downloadable phonebook (XML, LDAP, up to 3000 entries), call waiting, call log

(up to 300 records), auto answer, flexible dial plan, server redundancy and fail-over QoS Layer 2 QoS (802.1Q, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS) Security User and administrator level access control, MD5 and MD5-sess based authentication, 256-bit AES encrypted configuration file, TLS, SRTP, HTTPS, 802.1x media access control, DECT authentication & encryption Multi-language Chinese Simple, Chinese Tradition, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Hebrew, Hungarian, Japanese, Korean, Norwegian, Portuguese, Romanian, Spanish, Swedish, Turkish. Upgrade/

Firmware upgrade via TFTP/HTTP/HTTPS, mass provisioning using TR-069 or Provisioning AES encrypted XML configuration file Multiple SIP Up to ten (10) distinct SIP accounts per system Accounts Each handset may map to any SIP account(s) Each SIP account may map to any handsets(s) DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 14 Ring Group Flexible options when multiple handsets share the same SIP account Circular Mode:

All phones ring sequentially, starting with the phone after the one which rang last. Linear Mode:

All phones ring sequentially in the predetermined order, starting with the first phone each time. Parallel Mode:

All phones ring concurrently; after one phone answers, the remaining available phones can make new calls Power & Green Universal Power Supply Input AC 100-240V 50/60Hz; Output 5VDC, 1A; Micro-

Energy Efficiency USB connection;

PoE: IEEE802.3af Class 1, 0.44W3.84W Package Content Base unit, Universal Power Supply, Ethernet cable, Quick Installation Guide, GPL Statement Temperature Operation: -10 to 50C (14 to 122F); Storage: -20 to 60C (-4 to 140F);

and Humidity Humidity: 10% to 90% non-condensing Compliance FCC: FCC Part 15B; FCC Part 15D;MPE; FCC ID CEEN 55032; EN 55035; EN 61000-3-2; EN 61000-3-3; EN 60950-1; EN 301 489-1/-6; EN 301 406; EN 50385; RED NB Cert RCMAS/NZS 32; AS/NZS 60950.1. ANATEL, EAC, UL(adapter). DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 15 DP730 Technical Specifications The following table resumes all the technical specifications including the protocols / standards supported, voice codecs, telephony features, languages and upgrade/provisioning settings for the DP730 handsets. Table 5: DP730 Technical Specifications Air Interface Telephony standards: DECT Frequency bands:

1880 1900 MHz (Europe), 1920 1930 MHz (US) 1910 1920 MHz (Brazil), 1786 1792 MHz (Korea) 1893 1906 MHz (Japan), 1880 1895 MHz (Taiwan) Number of channels: 10 (Europe), 5 (US, Brazil or Japan), 3 (Korea), 8 (Taiwan) Range: up to 300 meters outdoor and 50 meters indoor Peripherals 2.4 inch (240x320) color TFT LCD 27 keys including 3 soft keys, 5 navigation/ menu keys, 4 dedicated function keys for SEND, POWER/END, SPEAKERPHONE, MUTE, 3 side keys including 2 volume (up and down) and 1 Push-to-Talk key 3-color MWI LED 3.5mm headset jack Proximity and accelerometer sensors Backlit keypad Removable belt clip Protocols/Standards Hearing Aid Compatibility (HAC) compliant Micro-USB port for alternative charging and non-battery operation Voice Codecs G.722 codec for HD audio and G.726 codec for narrow band audio (G.711/a-law, G.723.1, G.729A/B, iLBC and OPUS are supported via companion DECT base station DP752), AEC, AGC, Ambient noise reduction on microphone capturing and advanced noise suppression on audio playing Telephony Features Hold, transfer, forward, 3-way conference, push-to-talk (DP730), intercom, call park, call pickup, downloadable phonebook, call waiting, call log, auto answer, click-to-dial, flexible dial plan HD Audio Yes, in both Handsets and Speakerphone modes Security DECT authentication & encryption Multi-language Chinese Simple, Chinese Tradition, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Hebrew, Hungarian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Spanish, Turkish. Upgrade/

Software Upgrade Over-The-Air (SUOTA), handsets provisioning Over-The-Air Provisioning Multiple Line Each handset may access up to 10 lines Access DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 16 Power & Green Universal Power Supply Input AC 100-240V 50/60Hz; Output 5VDC 1A; Micro-USB Energy Efficiency connection;

Rechargeable Li-ion battery (500 hours of standby time and 40 hours of talk time) Package Content Handset unit, universal power supply, charger cradle, belt clip, 1 battery, Quick Start Guide Temperature Operation: -10 to 50C (14 to 122F); Charging: 0 to 45C (32 to 113F); Storage:

and Humidity

-20 to 60C (-4 to 140F); Humidity: 10% to 90% non-condensing Compliance FCC: FCC Part 15B; FCC Part 15D; SAR (FCC 47 CFR Part2.1093; IEEE 1528;

IEC 62209-2); FCC Part68 HAC; FCC ID CEEN 55032; EN 55035; EN 61000-3-2; EN 61000-3-3; EN 60950-1;EN 301 489-1/-6; EN 301 406; EN 50332-2; SAR(EN50360;EN50566;EN 50663;EN62209-

1; EN62209-2; EN 62479); RED NB Cert RCMAS/NZS CISPR32; AS/NZS 60950.1;AS/CA S004;AS/ACIF S040. ANATEL, EAC, UL(adapter). DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 17 DP722 Technical Specifications The following table resumes all the technical specifications including the protocols / standards supported, voice codecs, telephony features, languages and upgrade/provisioning settings for the DP722 handsets. Table 6: DP722 Technical Specifications Air Interface Telephony standards: DECT Frequency bands:

1880 1900 MHz (Europe), 1920 1930 MHz (US) 1910 1920 MHz (Brazil), 1786 1792 MHz (Korea) 1893 1906 MHz (Japan), 1880 1895 MHz (Taiwan) Number of channels: 10 (Europe), 5 (US, Brazil or Japan), 3 (Korea), 8 (Taiwan) Range: up to 300 meters outdoor and 50 meters indoor Peripherals 1.8 inch (128x160) color TFT LCD 23 keys including 2 softkeys, 5 navigation / menu keys, 4 dedicated function keys for SEND, POWER/END, SPEAKERPHONE, MUTE 3-color MWI LED 3.5mm headset jack Removable belt clip Micro-USB port for alternative charging and non-battery operation Protocols/Standards Hearing Aid Compatibility (HAC) compliant Voice Codecs G.722 codec for HD audio and G.726 codec for narrow band audio (G.711/a-law, G.723.1, G.729A/B, iLBC and OPUS are supported via companion DECT base station DP752), AEC, AGC, Ambient noise reduction on microphone capturing and advanced noise suppression on audio playing Telephony Features Hold, transfer, forward, 3-way conference, push to talk, call park, call pickup, downloadable phonebook, call waiting, call log, auto answer, click-to-dial, flexible dial plan HD Audio Yes, in both Handsets and Speakerphone modes Security DECT authentication & encryption Multi-language Chinese Simple, Chinese Tradition, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Hebrew, Hungarian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Spanish, Turkish Upgrade/

Software Upgrade Over-The-Air (SUOTA), handsets provisioning Over-The-Air Provisioning Multiple Line Each handset may access up to 10 lines Access Power & Green Universal Power Supply Input AC 100-240V 50/60Hz; Output 5VDC 1A; Micro-USB Energy Efficiency connection; Rechargeable 800mAh Ni-MH Low Self-Discharge (LSD) AAA batteries (250 hours of standby time and 20 hours of talk time) DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 18 Package Content Handsets unit, universal power supply, charger cradle, belt clip, 2 batteries, Quick Installation Guide Temperature Operation: -10 to 50C (14 to 122F); Charging: 0 to 45C (32 to 113F); Storage:

and Humidity

-20 to 60C (-4 to 140F); Humidity: 10% to 90% non-condensing Compliance FCC: FCC Part 15B; FCC Part 15D; SAR (FCC 47 CFR Part2.1093; IEEE 1528;

IEC 62209-2); FCC Part68 HAC; FCC ID CEEN 55032; EN 55035; EN 61000-3-2; EN 61000-3-3; EN 60950-1;EN 301 489-1/-6; EN 301 406; EN 50332-2; SAR(EN50360;EN50566;EN 50663;EN62209-

1; EN62209-2; EN 62479); RED NB Cert RCMAS/NZS CISPR32; AS/NZS 60950.1;AS/CA S004;AS/ACIF S040. ANATEL, EAC, UL(adapter). DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 19 GETTING STARTED This chapter provides basic installation instructions including the list of the packaging contents and also information for obtaining best performance with the DP730/DP722 IP DECT phone and its base station DP752. Equipment Packaging Table 7: Equipment Packaging DP752 1 Base unit DP752 1 Universal power supply 5V 1 Bracket 1 Ethernet cable 1 Quick Installation Guide 1 GPL Statement Figure 1: DP752 Package Content Table 8: Equipment Packaging DP730 DP730 1 Handset unit 1 Universal power supply 5V 1 Charging station 1 Handset Belt 1 Rechargeable Li-ion battery 1 Quick Installation Guide DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 20 Figure 2: DP730 Package Content Table 9: Equipment Packaging DP722 DP722 1 Handset unit 1 Universal power supply 5V 1 Charging station 1 Handset Belt 2 Rechargeable batteries 1 Quick Installation Guide Figure 3: DP722 Package Content Note: Check the package before installation. If you find anything missing, contact your system administrator. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 21 Connecting DP752 To setup the DP752 Base Station, please follow the steps below:

Power Input Network Socket Figure 4: DP752 Back View You have two options for power and network connection of the base station: AC power or Power over Ethernet

(PoE). Note: For better signal range, we recommend to install DP752 with LED side facing toward the usage area. Ceiling mount is recommended for better coverage. Connecting via AC power 1. Connect the micro-USB connector into the related port on the base station and connect the other end of the power adapter into an electrical power outlet. 2. Connect the supplied Ethernet cable between the Internet port on the base station and the Internet port in your network or the switch/hub device port. Connecting via PoE To connect the base station using PoE, you need to connect the Ethernet cable provided (or 3rd party network cable) between the Network Socket on the base station to Ethernet port of your PoE switch/hub. Setting up DP730/DP722 Handsets Please follow below steps to insert batteries into the Handsets:

Open the battery compartment cover. For DP730: Inset Li-ion battery with the electrodes in the bottom left corner. For DP722: Insert AAA batteries with correct polarity (+ / -). Close the battery compartment cover. Note: Please charge the batteries fully before using the Handsets for the first time DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 22 1 3 4 6 1. Battery compartment cover of DP730 2. Battery 3. Rear of DP730 4. Battery compartment cover of DP722 5. AAA Batteries 6. Rear of handset 2 5 Battery Information Figure 5: Setting up the DP730/DP722 Table 10: DP722/DP730 Battery Specifications DP722 Batteries Specifications DP730 battery specifications Technology: Nickel Metal Hydride (Ni-MH) Technology: Li-ion Size: AAA Voltage: 1.2V Nominal Voltage: 3.8V Capacity: 1500mAh Capacity: 800mAh Charging time: 12 hours from empty to full Charging time: 12 hours from empty to full Standby time: up to 500 hours Standby time: up to 250 hours Talk time: up to 40 hours active talk time Talk time: up to 20 hours active talk time In order to get the best performance of your DP730/DP722 Handsets, we recommend using original batteries provided in the package or batteries compliant with above specifications. The specifications may differ depending on the age and capacity of the batteries used. Important Note: Be careful when inserting the batteries into your handset to avoid any risk of short-circuit, which lead to damage your batteries and/or the handset itself. Do not use damaged batteries which can increase the risk of serious harm. Setting up the Charge Station Please refer to the following steps for setting up the charge station and charging the Handsets:

1. Connect the DC plug on the power adapter to the micro-USB connector on the charge station. 2. Connect the other end of the power adapter into an electrical power outlet. 3. After setting up the Handsets and the charge station, place the Handsets in the charge station. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 23 DP752 LED Patterns Figure 6: Setting up Charging Stations The DP752 has 5 LED lights on it. Please refer to the following table for the meaning of each light. Figure 7: DP752 LED Patterns Table 11: DP752 LED Patterns LED Light Status Indicates Power ON/OFF. Indicates status of SIP account registration and network Solid ON: SIP account registered. Blinking: SIP account not registered or network error Indicates status of the DECT handset registration:

Solid ON: Handset registered to base. Fast Blinking (0.25s ON/0.25s OFF): Paging handset. Blinking (0.5s ON/0.5s OFF): Pairing mode. DP730/DP722 Handsets Description The LCD screen and the Keypad are the main hardware components of the DP730/DP722. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 24 Figure 8: DP722 Keys Description Key Description 1. Earphone Delivers audio output. Table 12: Keypad Keys Description 2. LED Indication Red: Charging. Green: Charge completed. Blinking: Missed call(s) or Voice Mail received. 3,5 Left and right softkeys Correspond to functions displayed on the LCD. These functions change depending on the current context. 4. LCD display Shows call information, handset status icons, prompt messages, etc. 6. 4 Arrow key combination Permits navigation of the cursor through the displayed menu options. 7. Men/Ok key Selects the option chosen by the cursor. (Enters the main menu from the home screen.) 8. Off-hook / Dial key Enters dialing mode, or dials number entered. 9. On-hook / Power key Terminates calls, or turns the handset on / off. 10. Alphanumeric Keypad Provides the digits, letters, and special characters in context-

sensitive applications. For + sign, press and hold key 0. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 25 11. # / Lock key Locks keypad against unintentional entries when keep pressing #. Press and hold # key for approximately 2 seconds to lock the keys. Press Unlock softkey and then # to unlock the keys. 12. Mute key Activates or deactivates the mute feature. 13. Hands-free / Speaker key Switches between handset and hands-free / speaker modes. 14. Microphone Picks up audio earpiece and hands-free calls. Figure 9: DP730 Keys Description Key Description Table 13: Keypad Keys Description 1. Proximity sensor The proximity senor can detect and measure gravitational acceleration, tilt, vibration, altitude changes, and static position. 2. Earphone Delivers audio output. 3,4 Volume up / Down Keys Configure the handset and ringtone volume. 5. PTT Key PTT (Push-to-Talk) button, to initiate PTT call. 6. Hands-free / Speaker Switches between Handset and Hands-free / Speaker modes. key DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 26 7. Arrow key combination Allows navigation of the cursor through the displayed menu options.

(Up, Down, Left, Right) 8. Off-hook / Dial key Enters dialing mode, or dials number entered. 9. Alphanumeric Keypad Provides the digits, letters, and special characters in context-sensitive applications. For + sign, press and hold key 0. 10.

* / Silent Mode key Activates or deactivates the silent mode (no ringtone heard during incoming call) when keep pressing on * in idle screen. 11. LED indicator 1dual-color LED indicator indicating: power, call, battery, message waiting 12. 3.5 mm headset jack Phone connector for the headphones/headsets. 13. Color LCD Screen 2.4-inch (240x320) TFT color LCD 14. Softkeys Correspond to functions displayed on the LCD. These functions 15. Mute Mute microphone during conversation. change depending on the current context. 16. Menu/OK key Selects the option chosen by the cursor or enters the main menu from the home screen. 17. On-hook or Power key Terminates calls or turns the handset on / off. 18. # / Lock key Locks keypad against unintentional entries when keep pressing #. Press and hold # key for approximately 2 seconds to lock the keys. Press Unlock softkey and then # to unlock the keys. 19. Microphone Picks up audio earpiece and hands-free calls. DP730/DP722 Icons Description The following table contains description of each icon that might be displayed on the LCD screen of the DP730/DP722 Handsets. Table 14: DP730/DP722 Icons Description Battery status Not equipped with battery Battery status Battery empty Battery status Battery low Battery status Battery normal Battery status Battery full DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 27 Battery status Charging Signal status Not subscribed Signal status Not in range Signal status Signal very low Signal status Signal low Signal status Signal normal Signal status Signal good Signal status Signal very good Microphone MUTE Status OFF - Not muted ON Muted Speaker status OFF - Speaker is inactivated ON - Speaker is activated Headset icon Missed Call icon Voicemail icon Ringtone status OFF - Ringtone off (Silent mode) ON - Ringtone on Keypad Lock status OFF - Keypad unlock ON - Keypad locked Incoming Call notification DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 28 Outgoing Call notification Missed Call notification Voicemail notification Contacts Call History Registration Voice Mail Preferences Shortcut Call features Status Settings DP730/DP722 Handsets Menu The Handsets has an easy-to-use menu structure. Every menu opens a list of options. To open the main menu, press Menu (left softkey) when the Handsets is on and in standby mode. Press Arrow keys to navigate to the menu option you require. Then press Select (left softkey) or OK/Selection key to access further options or confirm the setting displayed. To go to the previous menu item, press Back (right softkey). You can press Power key at any time to cancel and return to standby mode. If you do not press any key, the Handsets automatically reverts to standby mode after 20 seconds. Note: Users can navigate by through handset menu by pressing menu number when displayed. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 29 Contacts Private/Global Phonebook Call History Registration Voice Mail Preferences Shortcut Call Features Status Settings 1. Missed Calls 2. Accepted Calls 3. Outgoing Calls 4. All calls 1. Register 2. Deregister 3. Select Base 1. Play Message 2. Set Voice Mail 3. Set Key 1 Outgoing Default Line Auto Answer Off-Cradle Pickup On-Cradle Hangup Mute as DND Disable Busy Tone Disable CW Tone Onhook Backlight Cradle Backlight SIP Account Display Customizing keys functions Speed dial Set Key 1 1. Do Not Disturb 2. Call Forward 3. Call Waiting 1. Base Status 2. Handset Status 3. Line Status 1. Handset Name 2. Phone Language 3. Date / Time 4. Audio 5. Display 6. Network Settings 7. SIP Settings 8. System Settings 9. Firmware Upgrade 10. Factory Functions Figure 10: DP730/DP722 Menu Structure DP752/DP722/DP730 User Guide Version 1.0.5.9 1. Advisory Tone 2. Ringtones 3. Volume LCD Timeout (Idle) LCD Timeout (Call) Menu Timeout Message Waiting Prompt LCD Brightness 1. Change Base PIN 2. Factory Reset 3. Reboot Base 4. Repeater Mode 1. Diagnostic Mode 2. Audio Loopback 3. LCD ON /OFF 4. LCD Diagnostic 5. System Monitoring P a g e | 30 Contacts Private: Private contacts include contacts visible in the current Handsets only. Global: Global phonebook contacts are the contacts shared between the Handsets subscribed to the DP752 base station. Note: Private/Global Phonebooks will be merged on the handset. Call History Display the call history:

1. Missed Calls. 2. Accepted Calls. 3. Outgoing Calls. 4. All Calls. Note: You can add contacts to Shared Contacts directly from call logs. Registration Register Register your handset to base station. Deregister Deregister your handset from base station. Select Base Select base station. Voice Mail 1. Play Message Play voice mail messages received. 2. Set Voice Mail Configure voice mail parameters. 3. Set Key 1 Configure Key 1 as VM speed dial for selected account. Preferences Outgoing Default Line Select account to be use by default for outgoing calls. Auto Answer Enable/Disable Auto Answer. (Default is Disabled). Off-Cradle Pickup Enable/Disable Off-Cradle Pickup. If enabled, users can answer the calls by picking up the handset off-cradle. (Default is Disabled). On-Cradle Hangup Enable/Disable On-Cradle Hangup. If enabled, users can end the call by placing the handset on-cradle. (Default is Disabled). Mute as DND Enable/Disable Mute as DND. If enabled, pressing mute key on idle state will set the phone to DND mode. (Default is Disabled) DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 31 Disable Busy Tone Enable/Disable Busy Tone. If set to enabled, busy tone will not be played.

(Default is Disabled). Disable CW Tone Enable/Disable CW Tone. If set to enabled, Call Waiting Tone will not be played.

(Default is Disabled). Onhook Backlight Enable/Disable Onhook Backlight. If enabled, pressing key on idle screen will switch off LCD screen. (Default is Disabled) Cradle Backlight Enable/Disable/Dim Cradle Backlight. If enabled, LCD will remain backlit when the handset is placed on-cradle/charging. If set to Dim, LCD brightness will be reduced when the handset is placed on-cradle/charging. (Default is Disabled) SIP Account Display Select which SIP Account information will be displayed on the screen. Name Only: Display SIP Account Name only. (Default) ID Only: Display SIP User ID only. None: No account information will be displayed. Shortcut Customizing keys functions

: Configure Left Softkey function in idle. Function can be set as Menu, History, Contacts, Line or PTT. Default is Menu.

: Configure Right Softkey function. Function can be set as History, Contacts, Line or PTT Default is Contacts.

: Configure Arrow UP Key function. Default is Outgoing Calls (Call History).

: Configure Arrow DOWN key function. Default is Accepted Calls (Call History).

: Configure Arrow LEFT key function. Default is Ringer Volume Down.

: Configure Arrow RIGHT key function. Default is Ringer Volume Up. Select key and press OK button to configure function. Following functions are available for arrow keys: 1. Disabled, 2. Menu, 3: Missed Calls, 4: Accepted Calls, 5: Outgoing Calls, 6: History, 7: Contacts, 8: Status, 9: Line, 10: Voice Mail, 11:

Ringer Volume Up, 12: Ringer Volume Down, 13: Audio Volume Up, 14: Audio Volume Down. Speed Dial Assign contact numbers as speed dial. Select a key [2], [3], [4], [5], [6], [7], [8] or [9] and press OK button. Select Edit DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 32 to manually specify the destination number, or select From Contacts to select a contact as speed dial destination. Set Key 1 Configure Key 1 as VM speed dial for selected account. Call Features 1. Do Not Disturb Enable/disable do not disturb mode on the phone. 2. Call Forward Configure call forward feature. 3. Call Waiting Configure call waiting feature. Status 1. Base Status Display Base status (Firmware, IP address, Subnet mask, Gateway, MAC Address) 2. Handset Status Display Handsets status (Model RF, Firmware, IPEI) 3. Line Status Display Line status (Account name, Status) Settings 1. Handset Name Change the Handset name. 2. Phone Language Select the language to be displayed on the phone's LCD. (Default is English.) 3. Date/Time Configure date and time on the Handsets. 4. Audio Specify ringtones for internal/external calls, the volume, advisory tones (Keypad, Confirmation, Low battery notifications) and Vibration mode (DP730 only). 5. Display Configure backlight, LCD timeout (Idle/Call), LCD brightness, Message Waiting Prompt and menu key timeout. 6. Gestures (DP730 only) Configure Close-to-Ear Backlight and Facedown Hangup. 7. Network Settings Configure IP addresses and select DHCP/Static IP mode. 8. SIP Settings Configure/View SIP accounts settings. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 33 9. System Settings Change Base PIN code, perform factory reset, reboot base and configure repeater mode. 10. Firmware Upgrade Upgrade the firmware version of the Handsets. 11. Factory Functions

- Diagnostic Mode (DP722) / Keypad Diagnostic (DP730) All LEDs will light up, and the LCD will display a table listing the names of all keys in red. Press any key to diagnose; the key's name will display in blue. After all keys are diagnosed, a prompt message (PASS) will display; press Back

(right softkey) to exit. Note: User can long press arrow UP key to exit at any time.

- Audio Loopback Speak to the phone using speaker/Handsets/headset. If you can hear your voice, your audio is working fine. Press Exit softkey to exit audio loopback mode.

-

LCD ON / OFF Select this option to turn off LCD. Press any button to turn on LCD.

-

LCD Diagnostic Select this option to enter LCD Diagnostic mode. Press Next (left softkey) to display white screen. Continue pressing the left softkey to view all remaining screens (black, blue, red, and green) and then exit. End the test early by pressing the right softkey.

- System Monitoring Displays RSSI, battery voltage and RPN information.

- Vibration (DP730 only) Test vibration on DP730.

- Acceleration Sensor (DP730) Displays X, Y, Z coordinates.

- Proximity Sensor (DP730) Test proximity sensor on DP730. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 34 BASIC OPERATIONS Turning the Handsets ON / OFF To turn ON the handsets

-

Long press on Power key until the LCD screen lights up. To turn OFF the handsets

-

Long press on Power key again when the handsets is idle until the display turns off. Setup Wizard Setup wizard shows at first access to DP722/DP730 or factory reset allowing users to configure handsets language and date/time. Users can quit at any time by pressing "Skip" (left softkey). Register DP730/DP722 Handsets to DP752 Base Station 1. On DP752 Base station, press and hold the Radio/Page button for 4 seconds until the Radio icon starts blinking to start Subscription process. Or Access web UI, and press Subscribe icon to Open Subscription. 2. On DP730/DP722, press Subscribe softkey if available on the main screen or access Menu Registration Register while the DP752 Radio icon is blinking. Note: Subscribe softkey appears only if DP730/DP722 is not registered to any DP752 base station. 3. Select BaseX (X=1-4) corresponding to the desired base station DP752, then press Subscribe. 4. The DP730/DP722 will search for nearby base stations and will display the RFPI code and Base station name of the discovered DP752. 5. Press Subscribe to pair with the displayed DP752. 6. The DP730/DP722 will display Easy Pairing on the LCD and play an audible buzz when successful. Then it will return to the home screen, displaying the Handsets name and number assigned by the registered base station. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 35 Figure 11: Registration Process Using DP730/DP722 with Multiple DP752 Base Stations DP730/DP722 is able to be registered to up four different DP752 base stations. Registering DP730/DP722 to an additional DP752 base station Considering DP730/DP722 is previously registered to an initial base station, please follow below steps to register a Handset to an additional base station:

1. Press Menu (left softkey or the selection key) to bring up operation menu. 2. Use arrow keys to reach Registration and select Register. 3. Navigate to an unsubscribed base using arrow keys, and click on Subscribe. 4. Make sure that the subscription is opened on the new base station. Figure 12: Multiple Base Stations Registration DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 36 Switching Between Different Base Stations 1. Press Menu (left softkey or the selection key) to bring up operation menu. 2. Use arrow keys to reach Registration. 3. Navigate to Select Base using arrow keys. 4. Select the desired base station and press Select. Figure 13: Switching Between Base Stations Unregister the DP730/DP722 Using DP730/DP722 Handsets:

1. On DP730/DP722, press Menu (left softkey or the selection key) to bring up operation menu. 2. Press arrow keys to move the cursor to Registration, then press Select (left softkey). 3. Navigate to Deregister. 4. Select the Handsets to be unregistered and press Deregister (left softkey). 5. Enter the system PIN code (default: 0000). 6. Press Done (left softkey) to confirm or Back (right softkey) to cancel. Using DP752 Base Station UI:

1. Access DP752 Web Interface. 2. Go to Status DECT Base Status. 3. Locate the Handsets to unregister and press Unsubscribe button. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 37 Figure 14: Unregister DP730/DP722 from DP752 web UI Setting the Key Lock You can lock the keypad against unintentional entries. It is, however, still possible to pick up incoming calls even with the keypad locked. To enable the Keypad Lock 1. Press the Pound key #

and hold for approximately 2 seconds. 2. The display shows Keypad Locked briefly and the key lock icon appears in the display. To disable the Keypad Lock 1. Press and hold Pound key #

to unlock the keys. 2. Keypad Unlocked appears briefly in the display and a windows prompt will be displayed to confirm that the keypad is unlocked. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 38 Locating a DP730/DP722 Handset from DP752 Base station In some situations, you may have a DP730/DP722 Handsets incorrectly positioned and you dont know its current location. You can locate a DP730/DP722 Handsets from his registered DP752 base station using below steps:

Locate via DP752 Web UI 1. Access the Web GUI of your DP752 using the admins username and password. 2. Press Login to access your settings and navigate to Status DECT Base Status tab. 3. Choose which Handsets to locate and press its corresponding Page button. 4. A paging call will be received on the selected DP730/DP722 Handsets. Note: If you press Page All icon

, all registered DP730/DP722 handsets will be receiving paging call. 5. Once located, you can press End Softkey to end paging call. Figure 15: Locate Handsets via Web UI DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 39 Locate via DP752 Base station 1. On DP752 Base station front side, press Radio/Page button. 2. All registered Handsets will receive Paging call. 3. Once located, you can end the paging calling by pressing any key on the Handsets or by pressing again Radio/Page button. Checking System Status You can view the system status on your handsets including the following information of the system:

Item Description Table 15: DP752 Info description Firmware Current firmware version installed on DP722/DP730. IP Address IP address of the base station DP752 if registered. Subnet Mask Subnet Mask of the base station DP752 if registered. Gateway Gateway IP of the base station DP752 if registered. MAC address MAC address of the base station DP752 if registered. Table 16: DP722/DP730 Info description Item Description Model (RF) Displays the product model, hardware version and DECT region of DP722/DP730. i.e.: DP722/DP730 1.4A (EU) Firmware Current firmware version installed on DP722/DP730. IPEI International Portable Equipment Identifier. Unique serial number for DECT handsets. To check the Handsets Status 1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Status menu

, then select Handset Status. To check the Base Status 1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Status menu

, then select Base Status. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 40 Basic Network Settings Once connected to the network, DP752 base station will attempt to contact a DHCP server to obtain valid network settings (e.g., IP address, subnet mask, gateway address and DNS address) by default. The users could also configure basic network settings manually from a registered DP722/DP730 Handsets. In order to configure the network settings manually, please follow the steps below:

1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Settings and access Network Settings menu. 3. Enter the system PIN code (default: 0000) and press the softkey Done. 4. To change to static IP, press or to select Static from the IP Settings field. 5. Enter valid values in the IP Address, Subnet Mask, Gateway, DNS Server fields. 6. Press softkey Save to save and apply the new changes. Note: A prompt message will be displayed to confirm that the new settings are saved successfully 7. The DP722/DP730 will display a reboot confirmation message, select Yes to apply the new settings or No to avoid rebooting the DP752. Figure 16: Network Settings Configuration DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 41 Change Menu and LCD Timeout 1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to Display, and then press Select (left softkey). 4. Set desired time in seconds for Backlight timeout and for Menu timeout. Available value: 15 seconds, 30 seconds, 60 seconds or disabled. (Default is 30 seconds) 5. Press Save (left softkey) to save and apply the new settings. Return to Idle Screen Press the Power Key to quickly exit the menu and return back to the main idle screen. If you do not press any key in a period of time, the LCD screen will automatically exit the menu and return to the idle screen as well. When you are navigating on the handsets menu, and you receive an incoming call, the LCD screen will automatically exit the menu and you can either accept or reject the call. When the call is terminated, the LCD screen will return back to the idle screen. Register SIP Account Register Account via Web User Interface 1. Access the Web GUI of your DP752 using the admins username and password. 2. Press Login to access your settings and navigate to Profiles tab and select a profile to use. DP752 supports up to 4 profiles. A profile is a set of settings including general settings, network settings, SIP setting, audio setting, call settings and ring tones, etc. A profile can be used with different SIP accounts. 3. In General Settings, set the following:

a. Profile Active to Yes. b. SIP Server field with your SIP server IP address or FQDN. c. Failover SIP Server with your Failover SIP Server IP address or FQDN. Leave empty if not available. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 42 d. Prefer Primary SIP Server to No or Yes depending on your configuration. Set to No if no Failover SIP Server is defined. If Yes, account will register to Primary SIP Server when failover registration expires. e. Outbound Proxy with your Outbound Proxy IP Address or FQDN. Leave empty if not available. 4. Press Save and Apply to save your configuration. Figure 17: SIP Settings 5. Go to DECT SIP Account Settings 6. Configure your SIP details in desired account:

a. Account: Select Account row to configure (Account 1 Account 10). b. SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar to phone number or actually a phone number. c. Authenticate ID: SIP service subscribers Authenticate ID used for authentication. Can be identical to or different from SIP User ID. d. Password: SIP service subscribers account password to register to SIP server of ITSP. For security reasons, the password will field will be shown as empty. e. Name: Any name to identify this specific user. f. Profile: Select the corresponding Profile ID (1/2/3/4). g. HS Mode: Assign the account to specific Handsets (HS1, HS2) or hunting group mode. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 43 h. Active: Set to Yes. If set to No, account is disabled and will not register. 7. Press Save and Apply to save your configuration. Figure 18: SIP Accounts Settings After applying your configuration, your phone will register to your SIP Server. You can verify if your DECT phone has registered with your SIP server from your DP752 web interface under Status Account Status (a green background with Yes under SIP Registration column for corresponding account indicates the account(s) has been successfully registered). Figure 19: Account Status DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 44 PHONE SETTINGS This chapter will help you with the instruction for configuring and changing the settings of your DP722/DP730, Editing the Handset Name The procedure to change the handset name is as follows:

Using DP722/DP730 Handsets:

1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to select Handsets Name, and then press Select. 4. Enter the desired name and press Rename and then the DP722/DP730 will display a confirmation message that the rename operation was successful. Figure 20: Handsets Name editing Using DP752 Base Station UI:

1. Access DP752 Web Interface. 2. Go to DECT General Settings. 3. In Handsets Settings section, change Handsets Name to desired name. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 45 Figure 21: Edit Handsets Name from DP752 Changing the Base PIN Code Users can change their code PIN by following the steps below:

Using DP722/DP730 Handsets:

1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to select System Settings, and then press Select. 4. Enter the current code PIN (By Default is 0000), a new window will be displayed inviting you to enter the new password, when done press Save (left softkey) and a prompt message will be displayed to confirm that the new code PIN has been saved successfully. Figure 22: Changing Admin Base PIN Code from DP722/DP730 DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 46 Using DP752 Base Station UI:

1. Access DP752 Web interface. 2. Go to DECT General Settings. 3. Set new PIN code in Admin PIN Code field. Note: Only digits accepted. Minimum allowed length is 4 digits. Figure 23: Changing Admin Base PIN Code from DP752 Selecting Phone Language The DP722/DP730 supports displaying texts in different languages. The handsets supports 20 languages

(see the table of the technical specifications). The default language of the handsets is English. You can change the language according to your requirement. To change the language of the handsets, please proceed as follows:

1. Press Menu (left softkey or the selection key) to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to select Phone language, then select the desired language and press Select (Left softkey). The LCD screen prompts Change phone language to xxx (xxx it the language you selected) 4. Press Yes (left softkey) to accept the change. Text displayed on the handsets will change to the selected language. Figure 24: Handsets Language DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 47 Activate/Deactivate Hands-Free Mode This function allows you to make a call without having to hold the handsets in your hand. 1. Press the Hands-free key while you are making a call or on the idle screen to activate hands free mode. 2. Press the Hands-free key again to deactivate the hands-free function. Muting the Microphone Press the Mute key to switch off the microphone during an established call. You can now talk freely without the other party hearing you and the icon of mute will be displayed on the screen. Press the Mute key again to switch the microphone back on. Adjusting Speaker and Earpiece Volume Press left key or right key while you are on an established call to set the volume of the earphone /

speaker. You can choose between 5 different levels. The default level is 3:

Volume 1 Volume 2 Volume 3 Volume 4 Volume 5 Ringtones Setting the Ringer Volume on the Handsets You can adjust the ringer volume for an incoming call to one of 6 levels (level 1 to 5 and off). Level 5 is the highest level. (The DP722/DP730 Handsets are set to level 3 by default). In order to configure the desired ringer volume, proceed as follows:

1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to select Audio (For DP722) and Audio & Vibration (for DP730) Volume. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 48 4. Press the left and right arrow keys to change repeatedly and set the desired volume. 5. Press Save to confirm the volume, and a message prompt will be displayed to confirm that the new volume has been successfully saved. If you select OFF, the icon appears in the display and the handsets will not ring for incoming calls. Setting Ringtones on the Handsets Figure 25: Ringer Volume You can change the ringtone for an incoming call. The device has 9 different ringer melodies for you to choose from (System Ring, Ring 1-8). The default setting for the ring tone for a call is melody 1. In order to configure the desired melody, proceed as follows:

1. Press Menu (left softkey or the selection key) to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to select Audio Ringtones. 4. Press Select (left softkey) to confirm the ringtones selected and a message prompt will be displayed to confirm that the new ringtones has been set successfully. Figure 25: Calls Ringtones DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 49 Advisory Tones Advisory tones are acoustic signals, which inform you of different actions and states on your handsets. The following advisory tones can be configured independently of each other:

Keypad tone: its played when a user presses any key of the keypad (even during calls). Confirmation: its played when a user saves settings or places the handsets in the charger cradle. Low battery: its played if the capacity of the batteries is low or the handsets requires charging. To configure the advisory tones 1. Press Menu (left softkey or the selection key) to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to select Audio Advisory tones, and choose which tone you want to change it. 4. Press the left and right arrow keys to either enable or disable the desired tones. 5. Press Save (left softkey) to confirm, and a message prompt will be displayed to confirm that the new settings has been successfully saved. Figure 26: Advisory Tone Ringtones Customization DP752/730/722 allow users to use custom ringtones. Custom ringtones will be stored on DP752 base station and only selected custom ringtone will be downloaded to specific DP722/DP730 handsets. DP752 base station supports up to 10 custom ringtones. Custom ringtone should be generated using GS Ringtone Tool and named ring[1-10].bin (example: ring1.bin , ring6.bin). To use custom ringtones, follow below steps:

DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 50 Step 1: Generate Custom Ringtone(s) 1. Download Ringtone Generator tool available at http://www.grandstream.com/support/tools 2. Run the tool and select your ringtone file to convert. Figure 27: Generating Custom Ringtone (Windows) Notes:

Currently only 16-bit linear PCM audio is supported for .wav files. The sampling rate should be automatically detected and the audio will automatically be down sampled to 8kHz. Stereo channels are also detected and mixed to produce mono output. pcm files should be pre-formatted to 16-bit 8kHz mono format. 3. Press Generate Ringfile to finish the process. Ringtone with filename ring1.bin will be created at same location as ringtone tool. Step 2: Download Custom Ringtone(s) to DP752 Base Station 1. Make generated ringtone files available in your TFTP, HTTP or HTTPS server. 2. Access DP752 Web GUI and go Maintenance Firmware Upgrade page. 3. Set Upgrade Via to TFTP, HTTP or HTTPS (depending on server type hosting ringtone files). 4. Set Firmware Server Path to IP address or the FQDN of the server. 5. Set Firmware Upgrade and Provisioning to Always Check for New Firmware. 6. Update the change by clicking the "Save and Apply" button. Then "Reboot" or power cycle the base station to download the ringtone(s). DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 51 Figure 28: Downloading Custom Ringtones Step 3: Assigning a Custom Ringtone for a DP722/DP730 Handsets 1. Access DP752 Web GUI and go DECT HS Settings HS# Settings page. 2. In Custom Ringtone, select a custom ringtone from the dropdown list. Note: If the list is not showing downloaded custom ringtone(s), press and check again. 3. Press Save and Apply. DP722/DP730 handsets will download the ringtone locally before using it.

(DP722/DP730 LCD screen will display download progress at this stage). 4. On DP722/DP730 Handsets menu, access Settings Audio Ringtones. Select Custom Ringtone using up/down arrow keys and press Select softkey. Note: DP722/DP730 handsets can use one custom ringtone only. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 52 Date and Time On the DP722/DP730, the Date and time are displayed on the idle screen and it obtains the date and time from the Simple Network Time Protocol (SNTP) server by default. If your handsets cannot obtain the date and time from the SNTP server, you need to configure the date and time manually. You can configure the time format and date format respectively. The handsets supports two formats for time (12 Hour or 24 Hour) and three date formats (DD/MM/YYYY; MM/DD/YYYY; YYYY/MM/DD). To configure date and time manually 1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to Date and time. Edit the current values in the Date & Time fields (you can change the date / time format using the left key or right key and press Set. 4. Press Save softkey to apply your changes. v Figure 29: Date and Time Settings Gestures (DP730 only) To configure Gesture options, follow instructions below:

1. On DP730 LCD Menu Settings, select Settings Gestures. 2. Set Close-to-Ear Backlight to On, to enable the LCD backlight when the handset is close to ear. 3. Set Facedown Hangup to On, to enable the call hangup when the handset is put down on its face. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 53 Facedown Hangup Figure 30: DP730 Gestures If Facedown Hangup option is set to ON, if DP730 is placed face down it will:

Reject incoming calls. Hang up ongoing call. Figure 31: DP730 Gestures Facedown Hangup Close-to-Ear Backlight If Close-to-Ear Backlight is OFF (default):

If Close-to-Ear Backlight is ON:

Figure 32: DP730 Gestures Close-to-Ear Backlight DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 54 Factory Functions The factory functions include the following diagnostic options:

Keypad Diagnostic ( on DP730) / Diagnostic Mode ( on DP722) Audio loopback LCD on / off LCD diagnostic System Monitoring Vibration ( DP730 only) Acceleration Sensor ( DP730 only) Proximity sensor ( DP730 only) 1. Press Menu (left softkey or the selection key) to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to select Factory Functions and choose which diagnostic, you need to perform:

- Diagnostic Mode (DP722) / Keypad Diagnostic (DP730) All LEDs will light up. All keys name will display in red on LCD screen before diagnosing. Press any key on the keypad to diagnose the keys function. When done, the keys name will display in blue on LCD with a prompt message (PASS). To exit press Back (right softkey). Note: Long arrow UP key at any time to exit diagnostic mode.

- Audio loopback Speak to the phone using speaker/handsets/headset. If you can hear your voice, your audio is working fine. Press Back (left softkey) to exit audio loopback mode.

- LCD ON / OFF Selects this option to turn off LCD. Press any button to turn on LCD.

- LCD Diagnostic Enters this option and press Left/Right arrow key to do LCD Diagnostic (you will notice that the color of the LCD will be changing). Press right softkey to quit.

- System Monitoring Displays RSSI, battery voltage and RPN information.

- Vibration (DP730 only) Press Vibrate key to test if device vibrates normally. Press right softkey to quit. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 55

- Acceleration Sensor (DP730 only) Displays X, Y, Z coordinates. Change handset position and check new values. Press right softkey to quit.

- Proximity Sensor (DP730 only) Cover the proximity sensor, when the sensor is covered, the gray dot displayed on screen will become green. Press right softkey to quit. Figure 33: Factory Functions DP722/DP730 Handsets Firmware Upgrade The DP722/DP730 handsets can detect if a new firmware is available when it is registered to a base station. Figure 34: Firmware Notification To upgrade the firmware on your handsets, follow the steps below:

1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to select Firmware Upgrade and press the softkey Select. 4. The LCD screen will display a prompt message to confirm the firmware downloading / upgrading press the right softkey Back to dismiss the upgrade process. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 56 Figure 35: Firmware Upgrade Reboot DP752 Base Station 1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Settings

. 3. Navigate to select Settings System Settings and choose Reboot Base. 4. Enter Base PIN code (by default the PIN code is: 0000). 5. The LCD screen will display a prompt message to confirm rebooting the base station, press Yes

(left softkey) to confirm or press No (right softkey) to cancel. Figure 36: Rebooting the Base Station Reset DP722/DP730 Handsets The users can reset the new settings made on the handsets after performing factory reset. To reset your handsets to the default settings:

1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Settings

. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 57 3. Navigate to select Settings System Settings and choose Factory Reset. 4. The LCD screen will display a prompt message to confirm restoring factory settings, press Yes (left softkey) to confirm and then the handsets will reboot to apply the default settings or press No (right softkey) to cancel. Figure 37: Resetting the Base Station DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 58 CALL OPERATIONS Outgoing Default Line When a Handsets is configured with more than one line, users can change the default outgoing line on DP730/DP722 handset using keypad Menu Preferences Outgoing Default Line. Placing calls Figure 38: Outgoing Default Line To place calls, you can use the following mode:

Earpiece mode: pressing the off-hook key to dial out. Speakerphone mode: pressing the speakerphone key to dial out. Headset mode: pressing the off-hook key to dial out using connected headset. During the call, you can switch the call mode by pressing the corresponding keys or connecting a headset. Make a Call using a Line Making calls require the use of SIP lines. So, you should first register the SIP account to the handsets beforehand, after registering the SIP lines, you can assign one or more outgoing lines for the handsets. The handsets can only use the assigned outgoing line(s) to place calls. Please refer to the following methods to make calls using a line:

Method 1:

Via default outgoing line:

1. Enter the desired number using the keypad. 2. Press Dial key or Speaker key

. The handsets will use the default outgoing line to dial out. 3. To terminate the call, press Hang-Up key

. Note: To change the default outgoing line, please refer to Outgoing Default line. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 59 Selecting the outgoing line:

1. Enter the desired number using the keypad. 2. Press the left softkey Call. 3. Select the desired line to dial out. 4. To terminate the call, press Hang-Up key

. Method 2:

1. Press Dial key or Speaker key to enter the pre- dialing screen. 2. Enter the number to dial using the keypad. 3. Press Dial key

, # key (Use # as dial key must be configured in web configuration) or wait for 4 seconds and the call will be initiated automatically. 4. To terminate the call, press Hang-Up key

. During the call, you can switch the call mode by pressing the corresponding keys and cancel the dialing operation by pressing the on-hook key. During the call conversations, you can press the left and right navigation keys to adjust the volume. The call duration is displayed on the LCD screen while the call is in progress and call summary will be displayed once the call is terminated. Notes:

To dial + please keep pressing 0 key for about 2 seconds. To dial from contacts list, choose a contact using navigation keys and press Dial key. Dialing from Call history Users may use their call history entries to initiate calls. 1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Call History Icon and then press Select. 3. Select the desired entry, then press Dial key to establish the call. Note: In step 3, users can press Options softkey followed by Edit Dial option to initiate the call. The call history list stores the last dialed phone numbers. When the memory of the redial number list is full, the handsets will automatically erase the oldest dialed number when a new number is dialed DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 60 Dialing from Phonebook Users may use their private or shared contacts to initiate calls. 1. Press Menu to bring up operation menu. 2. Press Contacts to access phonebook menu. 3. Select the contact to call. 4. Press Dial Key to initiate the call. Note: In step 4, users can press Options softkey followed by Edit Dial option to initiate the call. Answering Calls When receiving an incoming call, you can answer the call using following steps:

Earpiece mode:

Press Dial Key to pick up the call, or Accept softkey (left softkey). Speakerphone mode:

Press Speaker Key to pick up the call. Headset mode:

Press Dial Key to pick up the call, or Accept softkey using a connected headset. Notes:

- To answer an incoming call during an established call, press Dial Key

, or the Speaker Key

, or the Answer softkey. The incoming call is answered, and the original call is placed on hold.

- You can switch off the ringer temporarily by pressing Silent softkey. Auto Answer Users can enable Auto Answer feature to accept and automatically answer incoming calls. If enabled, DP722/DP730 Handsets will automatically answer incoming calls using speaker mode. To activate / deactivate the auto answer feature:

Using DP722/DP730 Handsets Menu 1. Press Menu to bring up operation menu. 2. Select Preferences navigate to Auto Answer using the up/down arrow keys. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 61 3. Switch between Enabled/Disabled using left/right arrow keys and Save after Enabling / Disabling the option. Using DP752 Base Station Web Interface 1. Access DP752 Base Station Web Interface. 2. Go to DECT Handsets Settings HS# Settings. 3. Set Enable Auto Answer to Yes. (By default, set to No). Off-Cradle Pickup Users can enable Off-Cradle Pickup feature to automatically answer incoming calls after picking up DP722/DP730 Handsets from its cradle. Incoming calls will be automatically answered using earpiece mode. Notes:

DP722/DP730 Handsets should be resting on its cradling and then picked up for this feature to work. Auto Answer feature should be set to No to work properly. To activate / deactivate the off-cradle pickup:

Using DP722/DP730 Handsets Menu 1. Press Menu to bring up operation menu. 2. Select Preferences navigate to Off-Cradle Pickup using the up/down arrow keys. 3. Switch between Enabled/Disabled using left/right arrow keys and Save after Enabling / Disabling the option. Using DP752 Base Station Web Interface 1. Access DP752 Base Station Web Interface. 2. Go to DECT Handsets Settings HS# Settings. 3. Set Enable Onhook on Cradle Reposition to Yes. (By default, set to No). Ending Calls To terminate the calls, press Hang-Up key

. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 62 On-Cradle Hang-up Users can enable On-Cradle Hang-up feature to automatically end ongoing calls after placing DP722/DP730 Handsets on its cradle. To activate / deactivate the on-cradle hang-up feature:

Using DP722/DP730 Handsets Menu 1. Press Menu to bring up operation menu. 2. Select Preferences navigate to On-Cradle Hang-up using the up/down arrow keys. 3. Switch between Enabled/Disabled using left/right arrow keys and Save after Enabling / Disabling the option. Using DP752 Base Station Web Interface 1. Access DP752 Base Station Web Interface. 2. Go to DECT Handsets Settings HS# Settings. 3. Set Enable Off hook on Cradle Pickup to Yes. (By default, set to No). Rejecting Calls To reject an incoming call, press Hang-Up key or Reject softkey (right softkey) Direct IP Call Direct IP calling allows two parties, that is, a handsets and another VoIP device, to talk to each other in an ad hoc fashion without a SIP proxy. Elements necessary to complete a Direct IP Call:

Both DP722/DP730 and other VoIP Device, have public IP addresses, or Both DP722/DP730 and other VoIP Device are on the same LAN using private IP addresses, or Both DP722/DP730 and other VoIP Device can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ). Users can perform IP calls using Star code following the below steps:

1. Pick up the handsets and press Dial key

. 2. Dial *47 followed by the target IP Address. Note: You can enter directly *47 + target IP address, and then press the dial key to initiate the call. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 63 Examples of direct IP calls a) If the target IP address is 192.168.0.160, the dialing convention is *47 then 192*168*0*160, followed by pressing the # key if it is configured as a send key or wait 4 seconds. In this case, the default destination port 5060 is used if no port is specified. b) If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be:

*47 or Voice Prompt with option 47, then 192*168*0*160*5062 followed by pressing the # key if it is configured as a send key or wait for 4 seconds. Note: To accept incoming direct IP call, Use Random Port setting should be set to NO. If set to YES, it can only dial out. The setting is available on DP752 web interface Profile SIP Settings Basic Settings. Call Hold/Resume During an established call, you can put the call on hold and resume following below steps:

1. Press the left softkey to access the call Options and then navigate to Hold. 2. Press Select, left softkey to put the call on hold. 3. To resume the call, access the options menu again and navigate to Resume, then press Select. If you press during the call, the first call will be on hold, and you can establish a new call; to resume the initial call, press

. Call Waiting This feature will notify you of a new incoming call during an established call, and display the incoming call information visually on the LCD screen and a call waiting tone will be heard. If this feature is disabled, the new incoming call will be automatically rejected. There are 2 ways to activate call waiting feature either using DP722/DP730 Handsets Menu or using DP752 Base Station Web Interface. Using DP722/DP730 Handsets Menu 1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Call Features navigate to Call waiting sub-menu. 3. Select the account for which you want to enable the Call waiting feature, and then press left softkey DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 64 Select. 4. Choose between Enabled and Disabled options and press the softkey Save, a prompt message will be displayed to confirm that the call waiting is enabled / disabled. 5. During an established call, press

(dial key) to put first call on hold and answers second incoming call. If no second incoming call, pressing will give the ability to initiate another call while first one is on hold. Note: You can switch between active/on-hold calls by pressing Options Swap. Using DP752 Base Station Web Interface 1. Access DP752 Base Station Web Interface. 2. Go to DECT Handsets Settings HS# Settings. 3. Set Disable Call Waiting Tone to No. (Default is No). 4. Press Save and Apply button to confirm. Do Not Disturb You can activate or deactivate the DND mode for your accounts registered on the handsets under the call settings. If DND mode is activated for a specific line, all incoming calls will receive busy treatment depending on your configuration (forward to voice mail, busy tone) To enable or disable the DND mode, follow the next steps 1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Call Features navigate to Do Not Disturb sub-menu. 3. Select the account on which you want to enable / disable the DND mode and then press Select 4. Choose between Enabled and Disabled options and press softkey Save to accept the changes, a prompt message will be displayed to confirm that the DND is enabled / disabled. You can navigate to Status Line status to check if the DND mode is enabled on the base station. You can also navigate via web interface of DP752 Status Line Options. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 65 Call Forward The call forward feature will allow you to forward all the incoming calls to the desired number. Three possible call forward types are available on the DP722/DP730. Forward all Dest: All the incoming calls are immediately forwarded. Forward Busy Dest: Incoming calls are immediately forwarded if the line is busy. Forward No Answer Dest: Incoming calls are forwarded if not answered after a period of time. To enable the call forward, please refer to the following steps:

1. Press Menu to bring up operation menu. 2. Use arrow keys to reach Call Features navigate to Call Forward sub-menu. 3. Select the account on which you want to enable/disable the call forward feature and press Select. 4. Select the type of call forwarding and enter the number to forward the calls, and then press Save

(left softkey) to apply the settings, a prompt message will be displayed to confirm that the new settings have been saved successfully. Call Transfer The DP722/DP730 supports the call transfer feature, you can transfer a call to another party using one of the following ways:

Blind transfer: Transfer a call directly to another party without consulting Attended transfer: Transfer a call with prior consulting. Blind Transfer 1. Press the Options softkey during a call, and then select Transfer. 2. The initial call will be on hold, enter the number you want to transfer the call to. 3. Press Dial key

. The call is connected to the number or the handsets you specified, and the LCD screen prompts Call Transferred. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 66 Attended Transfer 1. Press Left softkey Options during a call, and then select New call. 2. Choose the line and enter the number you want to transfer the call to, then press Dial key

. 3. Once the second call is established, press left softkey Option and select Transfer. Speed Dial Speed dial allows users to perform single-digit dialing to predefined numbers. This feature is particularly useful to speed up dialing frequently used or hard to remember numbers. A maximum of 8 speed dial numbers is allowed. For example, the digit key 2 is configured as a speed dial key and assigned the number 2000, the phone will dial out the number 2000 directly when you long press digit key 2. To assign the frequently used numbers as speed dial keys:

1. Press Menu to bring up operation menu. 2. Access to Shortcut and then use Arrow keys to reach Speed Dial sub-menu. Or;

Long press the representative number from 2 to 9 to set. (Note: The Speed dial number should not be already set on chosen representative number, otherwise long press will initiate a call to configured speed dial number). 3. Choose the digit key (2-9) to set and press Options or OK button. Three options will be available:

Edit: To configure manually a contact as speed dial. Users need to enter First Name, Last Name and Number. (Note: First Name + Number or Last Name + Number are accepted). From Contacts: To set a contact from the phonebook directory to be as speed dial. To Modify a Speed Dial:

Repeat above 2 steps. At step 2, re-edit /re-assign a contact from the shared or private directory as speed dial on selected key. To Delete a Speed Dial:

Repeat above 2 steps. At step 2, select Clear Entry option and press OK or Select to confirm. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 67 3-Way Conference The DP722/DP730 supports creating a local conference with other parties (including handsets starting the conference). To start a 3 Way conference, follow below steps:

1. Press the Dial key to place a call to the first party. 2. Press left softkey Options, then select Conference. 3. Enter second party number you want to add to the conference and press Dial Key

. To drop the conference call, press or End softkey. Note: Conference can be bridged before third party answers. Voice Mail The voice mail feature ensures that you will never miss any important messages. It permits either to leave voice mails to someone else or receive and listen to voice mails via the handsets Set Voice Mail Feature Code There are 2 ways to set Voice Mail Feature Code, either using DP722/DP730 Handsets Menu or using DP752 Base Station Web Interface. Note: The Voice Mail Feature Code depends on the service provider or IP-PBX used. For example, if UCM6xxx as SIP server, the Voice Mail Feature Code is *97. Using DP722/DP730 Handsets Menu 1. Press Menu (left softkey or the selection key) to bring up operation menu. 2. Access to Voice Mail and then select Set Voice Mail sub menu. 3. Select the account and enter the VM Access Number, then press Save softkey. Using DP752 Base Station Web Interface 1. Access DP752 Base Station Web Interface. 2. Go to Profiles Profile X General Settings. 3. Configure Voice Mail Access Number. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 68 Play Voice Mail Messages 1. Press Menu to bring up operation menu. 2. Access to Voice Mail and then select Play Message sub menu. 3. Select the account to retrieve your voice messages saved on your voice mail. Or;

Long press digit 1 key to dial configured Voice Mail feature code using Default Line. Notes:

Users can access directly voicemail menu to play messages, by clicking on View (left softkey) when the notification of a new voicemail pops up on the DP722/DP730s LCD screen. If VM is protected by a password, users can enter the password using DP722/DP730 keypad after reaching Voice Mail system. The password is defined on the service provider or IP-PBX side. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 69 PTT (Push-To-Talk) Key for DP730 The DP730/722 support the Push to talk (PTT) features which is a technology based on the instantaneous communication commonly employed in wireless cellular phone services using a button to switch the device from voice transmission mode to voice reception mode. 1. Users could press and hold the Push-to-talk key from any screen to quickly initiate PTT call. Figure 39: PTT Feature Enabled 2. The channel status will change to Sending PTT to indicate that you are transmitting as displayed on the following screenshot Figure 40: PTT Transmission To terminate PTT call, press button. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 70 Call Features The DP752/DP722/DP730 supports traditional and advanced telephony features including call forward and etc. Table 17: Call Features Unconditional Call Forward. To set up unconditional call forward:

Off hook the phone;

Dial *72 and then enter the number to forward the call;

Press OK softkey or SEND key. Cancel Unconditional Call Forward. To cancel the unconditional call forward:

Off hook the phone;

Dial *73;

Hang up the call. Busy Call Forward. To set up busy call forward:

Off hook the phone;

Dial *90 and then enter the number to forward the call;

Press OK softkey or SEND key. Cancel Busy Call Forward. To cancel the busy call forward:

Off hook the phone;

Dial *91;

Hang up the call. Delayed Call Forward. To set up delayed call forward:

Off hook the phone;

Dial *92 and then enter the number to forward the call;

Press OK softkey or SEND key. Cancel Delayed Call Forward. To cancel the delayed call forward:

Off hook the phone;

Dial *93;

Hang up the call.

*72

*73

*90

*91

*92

*93 DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 71 RESTORE FACTORY DEFAULT SETTINGS Warning:

Restoring the factory default settings will delete all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings. Grandstream is not responsible for restoring lost parameters and cannot connect your device to your VoIP service provider. Please follow the instructions below to reset the phone:

1. Press MENU button to bring up the keypad configuration menu;

2. Select Settings and enter;

3. Select System Settings Factory Reset;

4. A warning window will pop out to make sure a reset is requested and confirmed;

5. Press Yes softkey to confirm and the phone will reboot. 6. To cancel the Reset, press No softkey instead. Users also can perform factory reset using combo keys on DP722/DP730 during booting up prior its fully booted, to give DP722/DP730 the ability to recover from some extreme cases like self-reboot or stuck right after booted up. Please refer to following procedure for DP722/DP730 factory reset using combo key:

1. Connect the USB cable and power off DP722/DP730. 2. Power on DP722/DP730 and wait for Green LED. 3. Press 3 times Central Key (OK/Selection Key) quickly after Green LED on. 4. Press Speaker Key (left bottom) first and then Mute Key (right bottom) after Red LED on. 5. DP722/DP730 LED will start blinking in 3 colors: Green, Red and Orange if factory reset successful triggered. 6. Wait for about 1-3 minutes, the DP722/DP730 will boot up with setup wizard for initial language and date format settings. DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 72 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Exposure to Radio Frequency (RF) Signals For Handset This is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limitsfor exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons,regardless of age and health. This device and its antenna must not be co-

located or operating in conjunction with any other antenna or transmitter. This product has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE 1528. For Base This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For CE:

Operating Frequency Band:

DECT: 1881.792MHz-1897.344MHz(TX/RX) Max. Of Transmit power for 22.5dBm EXPERIENCING DP752/DP722/DP730 Please visit our website: http://www.grandstream.com to receive the most up- to-date updates on firmware releases, additional features, FAQs, documentation and news on new products. We encourage you to browse our product related documentation, FAQs and User and Developer Forum for answers to your general questions. If you have purchased our products through a Grandstream Certified Partner or Reseller, please contact them directly for immediate support. Our technical support staff is trained and ready to answer all your questions. Contact a technical support member or submit a trouble ticket online to receive in-depth support. Thank you again for purchasing the Grandstream DP722/DP730 / DP752, it will be sure to bring convenience and color to both your business and personal life. Grandstream Networks,Inc. 126 Brookline Ave., 3rd Floor Boston, MA 02215, USA DP752/DP722/DP730 User Guide Version 1.0.5.9 P a g e | 73