Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com For Warranty and RMA information, please visit www.grandstream.com GWN7630 Enterprise 802.11ac Wave-2 4x4:4 Wi-Fi Access Point Quick Installation Guide EN OVERVIEW The GWN7630 is a high-performance 802.11ac wireless access point for small to medium sized businesses, multiple floor offices, commercial loca-tions and branch offices. It offers dual-band 4x4:4 MU-MIMO technology(beamforming is not supported) and a sophisticated antenna design for maximum network throughput and expanded Wi-Fi coverage range. To ensure easy installation and management, GWN7630 uses a controllerless distributed network management design where the controller is embedded within the products web user interface. For the sake of large-scale deployment, GWN7630 supports to be managed by GWN Cloud system. With support fast roaming, advanced QoS, low-latency real-time applications, 200+
client devices per AP and dual Gigabit network ports with PoE/PoE+, combin-ing with the features of Mesh, Captive Portal and seamless connection with Grandstream WP8XX series Wi-Fi phone, the GWN7630 is an ideal wireless access point for large and small wireless network deployments. PRECAUTIONS Do not attempt to open, disassemble, or modify the device. Do not expose this device to temperatures outside range of -10 C to 60 C for storage and 0 C to 40 C for operating. Do not expose the device to environments outside of the following humidity range: 10-90% RH (non-condensing). Do not use the device in outdoor environment. Do not power cycle your device during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction. for PACKAGE CONTENTS 1x GWN7630 Access Point 1x Mounting Bracket 1x Ceiling Mounting Bracket 3x Screw
(PM 3 x 50) 3x Screw
(PA 3.5 x 20)
~1~
3x Plastic Expansion Bolt 3x M3 NUT GWN7630 PORTS 1 x Quick Installation Guide 1 x GPL Statement Port NET/POE NET RESET Description Ethernet RJ45 port (10/100/1000Mbps) supporting PoE/PoE+. Ethernet RJ45 port (10/100/1000Mbps) to your router or another GWN76xx. Factory reset button. Press for 7 seconds to reset factory de-
fault settings. POWERING AND CONNECTING THE GWN7630 GWN7630 can be powered on using PoE/PoE+ switch using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7630. Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch. Network Port RJ45 Ethernet Cable to power over Ethernet
(PoE/PoE+) Switch
~2~
HARDWARE INSTALLATION GWN7630 can be mounted on the wall or ceiling, Please refer to the following steps for the appropriate installation. Wall Mount 1. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7630. 2. Align the arrow on the GWN7630AP with the arrow on the locking tab of the mounting bracket and ensure that your GWN is firmly seated on the mounting bracket. 3. Turn the GWN clockwise until it locks into place and fits the locking tab. Wall Wall 4. Connect the power cable and the ethernet cable (RJ45) to the cor-
Plastic Expan-
Plastic Expansion Bolt sion Bolt PA3.5 x 20 PA3.5x20 Screw Screw 3 1 2 rect ports of your GWN7630. 5. Align the arrow on the GWN7630AP with the arrow on the locking tab of the mounting bracket and ensure that your GWN is firmly seated on the mounting bracket. 6. Turn the GWN clockwise until it locks into place and fits the locking tab. 4 5 6 Ceiling Mount Note: Ceiling mounting is recommended for optimal coverage perfor-
mance. 1. Remove the ceiling tile. 2. Place the ceiling backing plate in the center of the ceiling tile and mark the mounting screw holes (screw holes DIA 5.5mm, reticle hole DIA 25mm). Ceiling Mounting 3. Insert the screws through the mounting bracket. M3.0x50 screw M3 nut 1 2 3
~3~
~4~
4. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7630. 5. Align the arrow on the GWN7630AP with the arrow on the locking tab of the mounting bracket and ensure that your GWN is firmly seated on the mounting bracket and connect the network and power cables. 6. Turn the GWN clockwise until it locks into place and fits the locking tab. 4 6 5 CONNECT TO GWN7630 DEFAULT Wi-Fi NETWORK GWN7630 can be used as standalone access point out of box, or after factory reset with Wi-Fi enabled by default. After powering the GWN7630 and connecting it to the network, GWN7630 will broadcast a default SSID based on its MAC address GWN[MACs last 6 digits] and a random password. Note: GWN7630s default SSID and password information are printed on the MAC tag of the unit. GWN7630 48V 0.5A GigE POE
,and WiFi Made in China 630 ACCESSING THE CONFIGURATION INTERFACE A computer connected to the GWN7630s SSID, or to the same network as the GWN7630 can discover and access its configuration interface us-
ing one of the below methods:
Method 1: Discover GWN7630 using its MAC Address 1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the device, or on the package. 2. From a computer connected to same network as the GWN7630, type in following address using GWN7630s MAC address on your browser https://gwn_<mac>.local Example: If a GWN7630 has the MAC address 00:0B:82:8C:4D:F8, this unit can be accessed by typing https://gwn_000b828c4df8.local on the browser. Method 2: Discover GWN7630 using GWN Discovery Tool 1. Download and install GWN Discovery Tool from the following link:
http://www.grandstream.com/tools/GWNDiscoveryTool.zip 2. Open the GWN DiscoveryTool, and click on Scan.
~5~
~6~
3. The tool will discover all GWN76XX Access Points connected on the network showing their MAC and IP addresses. 4. Click on Manage Device to be redirected directly to the GWN7630s configuration interface, or type in manually the displayed IP address on your browser. Enter username and password to login. (The default administrator user-
name is admin and the default random password can be found at the sticker on the GWN7630). FCC Caution:
Notes:
Make sure that the GWN7630 is not already paired with another GWN76xx Access Point as slave, GWN7000 Router Series or GWN. Cloud, otherwise the configuration interface cannot be accessed If the GWN7630 is already paired, make sure to unpair it first, or do a factory reset. It is customers responsibility to ensure compliance with local regula-
tions for frequency bands, transmit power and others. To manage GWN7630 over cloud, please refer to https://www.gwn. cloud. Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
~7~
~8~