all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 2.88 MiB | October 05 2012 | |||
1 | Cover Letter(s) | October 05 2012 | ||||||
1 | Parts List/Tune Up Info | October 05 2012 | ||||||
1 | Cover Letter(s) | October 05 2012 | ||||||
1 | Cover Letter(s) | October 05 2012 | ||||||
1 | External Photos | October 05 2012 | ||||||
1 | Internal Photos | October 05 2012 | ||||||
1 | ID Label/Location Info | October 05 2012 | ||||||
1 | Test Report | October 05 2012 | ||||||
1 | Test Setup Photos | October 05 2012 |
1 | Users Manual | Users Manual | 2.88 MiB | October 05 2012 |
Grandstream Networks, Inc. GXV3140 IP Multimedia Phone Grandstream Networks, Inc. GXV3140 USER MANUAL FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 GXV3140 User Manual Index WELCOME ..................................................................................................5 GXV3140 Overview ........................................................................................................................5 INSTALLATION ...........................................................................................6 EQUIPMENT PACKAGING ...................................................................................................................6 SAFETY COMPLIANCES...............................................................................................................6 WARRANTY ...................................................................................................................................6 CONNECTING THE GXV3140 IP MULTIMEDIA PHONE.....................................................................7 WALL MOUNT................................................................................................................................7 PHONE STAND ..............................................................................................................................8 PRODUCT OVERVIEW ...............................................................................9 USING THE GXV3140 IP MULTIMEDIA PHONE......................................12 LCD......................................................................................................................................................12 MULTIPLE SIP ACCOUNTS AND LINES............................................................................................18 HANDSET, SPEAKER AND HEADSET MODE...................................................................................19 MAKING A CALL 19 DURING CALLS ..................................................................................................................................20 ANSWERING CALLS ...................................................................................................................20 CALL HOLD/WAITING .................................................................................................................20 CALL TRANSFER ........................................................................................................................20 3-WAY CONFERENCE ................................................................................................................21 VOICEMAILMESSAGE WAITING INDICATION...................................................................21 MUTE............................................................................................................................................21 CALL FEATURES .....................................................................................22 GXV3140 WEB CONFIGURATION INTERFACE......................................23 ACCESSING THE WEB CONFIGURATION PAGES ..........................................................................23 DEFINITIONS ......................................................................................................................................24 STATUS PAGE DEFINTIONS ......................................................................................................24 Grandstream Networks, Inc. GXV3140 USER MANUAL FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 ADVANCED SETTINGS PAGE DEFINITIONS ............................................................................25 MAINTENANCE PAGE DEFINITIONS.........................................................................................28 SIP ACCOUNT CONFIGURATION PAGE DEFINITIONS............................................................32 SAVING THE CONFIGURATION CHANGES......................................................................................39 REBOOTING FROM REMOTE LOCATIONS......................................................................................39 CONFIGURATION THROUGH A CENTRAL SERVER .......................................................................39 LCD MENU AND FEATURES ...................................................................40 PHONE BOOK FEATURES.................................................................................................................40 CALL HISTORY ...................................................................................................................................46 MESSAGES.........................................................................................................................................47 SOCIAL NETWORKS ..........................................................................................................................48 WEB BROWSER .................................................................................................................................50 MULTIMEDIA .......................................................................................................................................52 APPLICATIONS ...................................................................................................................................60 SETTINGS ...........................................................................................................................................64 PERSONALIZE....................................................................................................................................70 INFO.....................................................................................................................................................74 SOFTWARE VERSION UPGRADE...........................................................76 UPGRADE VIA KEYPAD MENU .........................................................................................................76 UPGRADE VIA WEB BROWSER CONFIGURATION PAGE..............................................................76 NO LOCAL TFTP SERVERS...............................................................................................................76 CONFIGURATION FILE DOWNLOAD ................................................................................................77 RESTORE FACTORY DEFAULT SETTINGS............................................78 RESTORE TO FACTORY DEFAULT SETTINGS VIA LCD MENU .....................................................78 RESTORE TO FACTORY DEFAULT SETTINGS VIA THE WEB INTERFACE ..................................80 EXPERIENCING THE GXV3140 MULTIMEDIA PHONE ..........................82 Grandstream Networks, Inc. GXV3140 USER MANUAL Page 3 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 TABLE OF FIGURES GXV3140 USER MANUAL Figure 1: Connecting GXV3140 ....................................................................................................................7 Figure 2: Wall Mount for GXV3140 ...............................................................................................................7 Figure 3: Phone Stand for GXV3140 ............................................................................................................8 Figure 4: Front, Side and Back View of GXV3140........................................................................................9 Figure 5GXV3140 LCD Idle Screen ........................................................................................................12 Figure 6: LCD IDLE screen displaying RSS News feed and Stock ............................................................12 Figure 7: LCD IDLE screen displaying Calendar and Weather Forecast ...................................................13 Figure 8GXV3140 Keypad.......................................................................................................................16 Figure 9: Web Browser Interface for GXV3140 ..........................................................................................23 TABLE OF TABLES GXV3140 USER MANUAL Table 1: GXV3140 Connectors .....................................................................................................................7 Table 2: GXV Key features at a glance .........................................................................................................9 Table 3GXV3140 Hardware Specification ...............................................................................................10 Table 4GXV3140 Technical Specifications ..............................................................................................10 Table 5LCD Icon Definition......................................................................................................................13 Table 6GXV3140 Keypad Definition ........................................................................................................16 Table 7: Call Features .................................................................................................................................22 Grandstream Networks, Inc. GXV3140 USER MANUAL Page 4 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 WELCOME Thank you for purchasing the Grandstream GXV3140 IP Multimedia Phone. The GXV3140 is designed for the high-end enterprise market and is easy to use and configure. It supports a broad range of audio codecs and H.26 codec. Based on the SIP standard, it is interoperable with 3rd party SIP platforms. The GXV3140 takes full advantage of VoIP technology to allow plug and play communication anywhere in the world. This user manual will help you to understand how to configure and manage your GXV3140 IP Multimedia phone. It will also show you how to fully utilize features such as quick installation, conference calling, and direct IP calling. GXV3140 Overview The GXV3140 is a next generation SIP-based IP Multimedia phone that supports a selection of high quality audio codecs and is compatible with the H.264 video codec. The GXV3140 supports high quality real-time video transmission on a 4.3 TFT color LCD even when under low bandwidth conditions (32kbps-1Mbps). The VGA cameras lens is adjustable to allow high quality video conferencing. The GXV3140 embodies a sleek and elegant industrial design. The advanced telephony and video features, interoperability with third party SIP products and ease of use makes it an ideal IP Multimedia product for both the enterprise and consumer markets alike. Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation of this product in any way other than as detailed by this User Manual, could void your manufacturer warranty. This document is subject to change without notice. The latest electronic version of this user manual is available for download @
http://www.grandstream.com/support/gxv_series_phone/gxv3140/documents/gxv3140_usermanual_englis h.pdf Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without the express written permission of Grandstream Networks, Inc. is not permitted. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 5 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 INSTALLATION EQUIPMENT PACKAGING The GXV3140 package should include:
1. One GXV3140 Phone Main Case 2. One Handset 3. One Phone Cord 4. One Universal Power Supply 5. One Ethernet Cable 6. One Phone Stand 7. One Headset Dongle 8. One Quick Start Guide SAFETY COMPLIANCES The GXV3140 phone complies with FCC/CE and various safety standards. The GXV power adapter is compliant with the UL standard. Only use the universal power adapter provided with the GXV package. The manufacturers warranty does not cover damages to the phone caused by unsupported power adapters. WARRANTY If you purchased your GXV from a reseller, please contact the company where you purchased your phone for replacement, repair or refund. If you purchased the product directly from Grandstream, contact your Grandstream Sales and Service Representative for a RMA (Return Materials Authorization) number before you return the product. Grandstream reserves the right to remedy warranty policy without prior notification. Warning: Please do not use a different power adapter as this may damage your phone. This type of damage is not covered by the warranty. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 6 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 CONNECTING THE GXV3140 IP MULTIMEDIA PHONE Figure 1: Connecting GXV3140 Table 1:GXV3140 Connectors 1 2 SD Card Slot USB Port 3 4 5 6 7 Headset Jack RCA Video/Audio Jacks RJ11 Jack PC Ethernet Port Network Ethernet Port Power Jack SD Card Slot USB devices may be connected via the USB port. For example, you can connect a USB flash drive to save captured pictures or use a USB keyboard or mouse for the built-in web browser. 3.5mm headset connector port Voice/video output port which can be connected to external peripherals (e.g. TV). Phone handset connector port 10/100Mbps RJ-45 port connecting to PC 10/100Mbps RJ-45 port connecting to Ethernet 12V DC Power connector port 8 WALL MOUNT The GXV3140 can be mounted on the wall; there are two slots on the back of the phone for wall mounting. Figure 2: Wall Mount for GXV3140 Grandstream Networks, Inc. GXV3140 USER MANUAL Page 7 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 The phone can be mounted on the wall via the two slots on the back of the phone. PHONE STAND The GXV3140 can also be placed on the table via the phone stand. Figure 3: Phone Stand for GXV3140 The GXV3140 has two positions for the stand on the back of the phone; each position supports a different angle. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 8 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 PRODUCT OVERVIEW Figure 4: Front, Side and Back View of GXV3140 Compatible Table 2: GXV Key features at a glance Open Standards Interfaces Extraordinary Quality Extraordinary Quality Advanced Features Audio Video Video Feature Rich SIP 2.0, TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS (A record and SRV), DHCP, PPPoE, TFTP, NTP Two 10/100Mbps Ethernet Ports1 USB2.0port3.5mm headset port. Advanced DSP for audioSilence SuppressionVAD,CNG,AEC,AGC Supports real-time video H.263/H.263+ and H.264 codec under low bandwidth
(32kbps-1Mbps). 4.3 digital TFT color LCD with 480x272 resolution, 45 degree rotating lens
(perpendicular), Advanced VGA lens, auto focus, auto exposure, zoom (2x optical 2x digital), Camera Block, PIP(Picture-in-Picture) and still picture capture/store. Traditional audio features: Caller ID, Call Waiting, Call Holding, Call Transfer, Do-Not-Disturb, Mute, Automatic dial. Built-in web browser, RSS news, Stock market update, Weather forecast, Grandstream Networks, Inc. GXV3140 USER MANUAL Page 9 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Advanced Functionality Table 3GXV3140 Hardware Specification Ethernet Port LCD Camera Auxiliary Ports Exterior Universal Power Supply Dimension Weight Operating Temperature Humidity Compliance Table 4GXV3140 Technical Specifications Lines Protocol Support Internet Radio, Media Player, Picture browser, Games, Calculator, Alarm clock, IM chat, Document Manager etc Support for multiple lines, conferencing, headset, Intercom, AES encryption. Dual switched 10M/100M auto-sensing Ethernet ports 4.3 digital TFT color LCD Tilt Capable 1.3M pixel CMOS camera with privacy shutter(VGA RCA Type Stereo & Media output port3.5m headset port1 USB port1 SD card reader Black ABS plastic30 buttons Input100-240V AC Output12V DC1.2A US/Euro/UK/Australian style plug available. 7.87x7.32x1.57in/200x286x40mm 1.87lb /0.85Kg 32-104 F/040C 10-90% Non-Condensing FCC/CE/C-Tick Three individual SIP accounts SIP 2.0, UDP/IP, PPPoE, RTP/RTCP, SRTP by SDES, HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP/SNTP, TFTP. 4.3 digital TFT color LCD with 480x272 resolution 4 programmable soft keys: F1F2F3F4. Line, mailbox, phonebook, mirror, call transfer, hold, conference, dial/send, speakerphone and five navigation keys. Dual switched 10M/100M auto-sensing Ethernet ports, USB 2.0 port, 1 audio/video output port (to synchronously output video to TV), headset jack. Layer 2 QoS (IEEE 802.1p/Q tagging-VLAN and Layer 3 QoS (DiffServ); Web interface or via secure (AES encrypted) central configuration file for mass deployment, keypad & adjustable 4.3 inch digital TFT Color LCD, Auto/manual provisioning system, GUI remote software
(TFTP/HTTP) upgrade for deployed devices including those behind a NAT/firewall. Support for automatic NAT/firewall traversal & remote automatic software upgrade and security, providing end-users with zero configuration and true interface, phone book, Display Function Keys Network Interfaces Device Management Provisioning Grandstream Networks, Inc. GXV3140 USER MANUAL Page 10 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 plug-and-play functionality. Support for remote configuration monitoring and syslog. Configuration through LCD, web browser or an external configuration file. Support for IETF STUN NAT traversal and symmetric RTP;
Static IP or DHCP. Full duplex speakeradvanced DSP Support G.723.1G.729A/B,G.711/A (PCMU/PCMA), G.726-
DTMFIn-audio, RFC2833SIP Info Silence suppressionVADCNGAGCmasking for packet loss/delay AECAGC for Speakerjitter buffer protocol Support for Jitter Buffer delay and packet loss concealment to enhance audio and video quality. Support for H.263/H.263+ and H.264 real-time video codecsCIF or QVGup to 30frames/sec, which ensures high quality video transmission even under low bandwidth conditions (32kbps-1Mbps) 4.3 digital TFT color LCD with 480x272 resolution, 45 degree rotating lens
(perpendicular), advanced VGA CMOS camera and sensor anti-flickering of imagesauto focusauto exposurezoom (2x optical 2x digital ), PIP(Picture-in-Picture) , audio mute, camera blockcall logvideo phone bookscreensaverstill picture capture/storeVGAvisual voice message indicator Caller ID, call waiting ID, call waiting/flash, call transfer, call holding, call forwarding, Do-Not-Disturb, three-way conference, redial, automatic dialing on off-hook, automatic answering, call records, volume control, voice message waiting indicator, downloadable custom ring tone. Private header support for anonymous calls. Configuration file authentication (before accepting changes);
TFTP/HTTP upgrade support, allows users to specify different URLs for the server to download from. DNS SRV support, SIP server failure transfer, message waiting indicator and custom screensaver. MD5 and MD5-sess DIGEST encoding and authentication Security protection: SIP over TLS and SRTP. Audio Features Video Features Call Handling Features Caller IDPrivacy Firmware Upgrade Server Advanced Features Security Grandstream Networks, Inc. GXV3140 USER MANUAL Page 11 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 USING THE GXV3140 IP MULTIMEDIA PHONE LCD When the phone is idle, the LCD screen will look similar to the figure below (The extension number and the IP address may be different from case to case, depending on the network environment and the settings):
Figure 5GXV3140 LCD Idle Screen Press the F2 button underneath Switch Screen to switch to another display screen. (Shown in figure below):
Figure 6: LCD IDLE screen displaying RSS News feed and Stock Grandstream Networks, Inc. GXV3140 USER MANUAL FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Press F2 again to switch to a display screen that displays the calendar and weather forecast. Figure 7: LCD IDLE screen displaying Calendar and Weather Forecast Table 5LCD Icon Definition Type Icon Network Line 1 Status Line 2 Status Line 3 Status Call related Definition Connected to the network Failed to connect to the network, the icon will flicker between yellow and gray. Line 1 is registered Line 1 is not registered Line 1 is busy Line 2 is registered Line 2 is not registered Line 2 is busy Line 3 is registered Line 3 is not registered Line 3 is busy Account 1 Auto Answer Note The Account and line status are separate. Line status will only show busy or idle. If Line 1 is in a call If Line 2 is in a call If Line 3 is in a call Grandstream Networks, Inc. GXV3140 USER MANUAL Page 13 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
. Account 2 Auto Answer Account 3 Auto Answer Account 1 Call Forward Account 2 Call Forward Account 3 Call Forward Volume setting, ranges from 0-9. The nine icons represent different volume levels. Ring volume, ranges from 0-9 Camera disabled. Do-Not-Disturb (DND) Missed Call. If there is a new missed call, the icon will flicker. Mute First DesktopSmall Layout Second DesktopSmall Layout First DesktopBig Layout Second DesktopBig Layout If configured to forward calls:
unconditional forward, forward when busy or forward on no answer The Small layout can be selected the Personalize/Screen Layout menu. in Call Volume Ring Volume Phone Status Screen Layout Icon Grandstream Networks, Inc. GXV3140 USER MANUAL Page 14 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Third DesktopBig Layout The headset is in use and is off hook. The headset is plugged in. The phone is on speaker. The handset is off hook. IM is not logged in IM is logging in; the icon will flicker between blue and gray. in The Big layout can be selected the Personalize/Screen Layout menu. The icon is displayed at the right hand-side of the status bar. There is a new message on IM. The icon will flicker between blue and yellow. Text message. The icon will flicker if there is a new unread text message. Alarm clock Mediamusic/videoPlayer Internet radio Web browser The icon is displayed at the right hand-side of the status bar. The icon is displayed at the right hand-side of the status bar. The icon is displayed at the right hand-side of the status bar. Audio Output IM Applications Grandstream Networks, Inc. GXV3140 USER MANUAL Page 15 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 External devices SD card USB flash drive. USB keyboard USB mouse Figure 8GXV3140 Keypad Table 6GXV3140 Keypad definition Key Definition 4 function/soft keys that correspond to the functions displayed on the LCD. Line/Account selection. Three independent SIP accounts may be configured, and the Line button can be used to choose the line/account to be used. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 16 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Retrieve video/voicemail message or other messages. Phonebook Standard telephone keypad. The # key can act as a send key. In the input mode, if an English alphabet needs to be entered, press the corresponding numerical key multiple times. For example, if the user wishes to enter B, press 2 three times; if the user wishes to enter Y, press 9 four times. Camera Loopback button. This button Enables or Disables the camera display on the local LCD. Call Transfer: Allows the user to transfer a call to another extension or number. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 17 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Places the call on hold Conference button - connects the caller/callee to the conference Sends a new number or redials the last number dialed. Turns the Speaker ON or OFF. Navigation Buttons: These arrows keys serve as up/down/left/right button when used in the GXV3140s menus. The middle button is used as the submit/select button. When the phone is idle, the up and down arrow can be used to increase/decrease the volume. MULTIPLE SIP ACCOUNTS AND LINES The GXV3140 supports up to 3 independent SIP accounts. Each account may have separate SIP servers, usernames and NAT configurations. Press the LINE button to view the status of the 3 lines and press the corresponding FUNCTION button to select the account to use for dialing out. When the phone is off-hook, press the LINE button to switch between different SIP accounts. For example, lets say that you configure 3 SIP accounts: Account1, Account2, and Account3. The registration status of each account is displayed on the desktop. If the account is registered, the icon next to the account will be in yellow and purple. If the account is not registered, the icon next to the account will be gray with a red cross on it. When all the accounts are registered, press F1 to select Line 1, the user should hear a dial tone and the LCD will display Account1. Furthermore you can press F2 to select Line 2, or press F3 to select Account3. When the user presses the FUNCTION button, they will hear a dial tone and can start entering the number that they wish to call. Incoming calls through the three accounts will try to use the corresponding line. If this line is busy, the icon for the line (top-left hand corner) will be green. When a call comes in and the line is busy, the next idle line will be used while the icon for that line will flicker between blue and green. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 18 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 HANDSET, SPEAKER AND HEADSET MODE The GXV3140 allows users to switch from the handset to speaker or headset by pressing the Hook Flash, the Headset FUNCTION button or the SPEAKER Button. MAKING A CALL There are several ways to make a call:
1. Enter the number Take the handset off hook or use the speaker/headsetpress the LINE button and select the desired account/line by pressing the corresponding FUNCTION button. A dial tone is given, adjust account if necessary. Enter the number Press SEND 2. Redial When redialing, the phone will use the account that was used to call the last number dialed. Therefore, if the last number dialed uses the third account, the phone will also use the third account when redialing. When the phone is idle, press the # or the SEND button. When using the speaker/headset/handset, press the SEND button. 3. By Call History Enter the Menu by pressing the F1 button, and then select Call history. The LCD monitor will display all call history types: Dialed calls, Received calls, and Missed calls. Select the call history that you wish to view by using the up and down arrow keys and then select the corresponding FUNCTION button to dial the number or delete the record. 4. By Phone Book Enter the Menu by pressing F1, and then select Phone Book. The LCD screen will display the saved records in the phone book. Navigate to the phone book record with the arrow buttons, and call the number by selecting the FUNCTION button. At the same time, users may browse through or delete the phone book records. 5. By Messages:
Enter the Menu by pressing F1, and then select Messages. The LCD screen will display the Message Inbox, Sent messages and Draft messages. Select the message and press F3 for Options, and then select Dial to dial out to the number. 6. On-hook Dialing:
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 19 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Without lifting the handset off the hook, simply dial the number and press F3 to SEND. This phone will dial the number and the audio will be output via speakerphone. The phone will use the primary account to dial out. To user other accounts, press the LINE key to select the account and then dial the number. DURING CALLS ANSWERING CALLS 1. Single Incoming callWhen the phone rings, you can use the headset, handset or speaker to answer the call. The user may also press the SPEAKER button or the corresponding FUNCTION button for Accept on the LCD screen. 2. Multiple Incoming CallsThe user will hear a call waiting tone and the LCD displays the number of the caller. At this moment, press the corresponding FUNCTION button for Accept to establish a connection with the new caller. This will put the previous call on hold, and users may press LINE button to see the status of each line and to switch between the lines 3. Paging/Intercom: After the phone makes a beep sound, the call is automatically established through the speaker. (Support from PBX / IP-PBX required) CALL HOLD/WAITING 1. Call HoldPress the HOLD button (
) to place the call on hold. 2. Call RecoverPress the HOLD button again or press the Resume FUNCTION button to return to the call. 3. Multiple CallsPut the current call on hold, press the LINE button to select another line or accept another call. When the line is busy the user hears a call waiting tone, notifying the user that a call is waiting. CALL TRANSFER 1. Blind Transfer: Press the CALL TRANSFER button to place the other party on hold. The phone will display the following message: Dial Number (Blind) OR Select Line (Attended). Dial the extension number and press F3 for SEND. This will transfer the call to the other party immediately. 2. Attended TransferPress the LINE button to select an idle line to use for attended transfer; this will place the other party on hold immediately. Dial the number that you wish to transfer to and after confirmation from the party, press the CALL TRANSFER button. The phone will display the following message: Dial Number (Blind) OR Select Line (Attended). Press the LINE button and select the line on hold. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 20 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 NOTE:
To transfer calls across SIP domains, SIP service providers must support transfer across SIP domains. Blind transfer will usually use the primary SIP profile. If the user enters the wrong number and wishes to cancel the transfer, just press the CALL TRANSFER button again to cancel the transfer or press the HOLD key to hold the line and retry again. 3-WAY CONFERENCE The GXV-3140 supports 3-way conferencing. 1. Initiate a Conference Call: Place the first call on hold by pressing the LINE button to call the second party. Once you establish the call, press the CONFERENCE button then select the line on hold to bring three parties together. 2. Cancel Conference: If after pressing the CONFERENCE button, a user decides not to conference anyone; press the corresponding FUNCTION key for Cancel to cancel the conference. 3. End Conference: There are two ways to end a conference. The first way is to press HOLD, this breaks the conference and places both parties on hold, and the user can now speak to individual party by selecting the corresponding LINE. The second way is to simply hang up and terminate the call. VOICEMAILMESSAGE WAITING INDICATION If the blue MWI LED icon is flickering on the upper right hand corner, it means that a new message is waiting. Press MSG to retrieve the message (the button needs to be configured). By default, pressing the MSG button will transfer to the voicemail box of Line1; if the user wishes to enter the voicemail box of Line 2 or Line 3, the corresponding Line should be selected prior to pressing the MSG button. The IVR prompts the user through the message retrieval process Note: Each of the 3 lines has its own voicemail; the Voicemail number for each number may be set up in the Voicemail ID configuration. MUTE 1. During a call, the LCD screen will display Mute. Press the corresponding FUNCTION button to mute the call. 2. After the Mute button is pressed, the LCD screen will display Unmute, when this button is pressed, the mute feature is cancelled. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 21 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 CALL FEATURES These are the feature codes for call features. To use the code, select the line you wish to use by pressing the LINE button and enter these feature codes. Table 7: Call Features Code
*30
*31 Feature Block Caller ID (for all subsequent calls) Send Caller ID (for all subsequent calls) Disable Call waiting (for all subsequent calls) Enable Call Waiting (for all subsequent calls) Block Caller ID (per call): Dial *67 + Phone/Ext. Number (no dial-tone in between). Send Caller ID (per call): Dial *82 + Phone/Ext. Number (no dial-tone in between). Disable Call Waiting (per call): Dial *70 + Phone/Ext. Number (no dial-tone in between). Enable Call Waiting (per call): Dial *71 + Phone/Ext. Number (no dial-tone in between). Unconditional Call Forward: Dial *72 + Phone/Ext. Number followed by the # key. Wait for a dial-tone and then hang up (dial-tone means input is successful). Cancel Unconditional Call Forward: Dial *73 and wait for a dial-tone before hanging up. Busy Call Forward: Dial *90 + Phone/Ext. Number followed by the # key. Wait for a dial- tone and then hang up. Cancel Busy Call Forward: dial *91 and wait for a dial-tone before hanging up. Delayed Call Forward: Dial *92 + Phone/Ext. Number followed by the # key. Wait for a dial-tone and then hang up. Cancel Delayed Call Forward: Dial *93 and wait for a dial-tone before hanging up.
*50
*51
*67
*82
*70
*71
*72
*73
*90
*91
*92
*93 Grandstream Networks, Inc. GXV3140 USER MANUAL FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 GXV3140 WEB CONFIGURATION INTERFACE The GXV-3140s embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allows users to configure the IP Multimedia Phone through a Web browser such as Microsofts IE or Mozilla Firefox (Java Script must be enabled). Figure 9: Web Browser Interface for GXV3140 ACCESSING THE WEB CONFIGURATION PAGES The GXV3140 Web Configuration Interface URL is http://Phone-IP-Address, where the Phone-IP Address is the IP address displayed on the phones LCD screen. To access the phones Web Configuration Menu:
Connect the computer to the same network as the phone. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 23 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Make sure the phone is turned on and shows its IP-address on the LCD display. Open a Web-browser on your computer. Enter the phones IP-address in the address bar of the browser. Enter the administrators login and password to access the Web Configuration Menu. 1. The computer has to be connected to the same sub-network as the phone. This can easily be done by connecting the computer to the same hub or switch as the phone is connected to. In absence of a hub/switch (or free ports on the hub/switch), please connect the computer directly to the phone using the PC-port on the phone. If the phone is properly connected to a working Internet connection, the phone will display its IP address. This address has the format: xxx.xxx.xxx.xxx, where xxx stands for a number from 0-255. You will need this number to access the Web Configuration Menu. E.g. if the phone shows 192.168.0.60, please enter http://192.168.0.60 in the address bar of your browser. 2. 3. The default login name for the administrator is admin, the default administrator password is set to admin. The default login name for end-users is user while the default user password is set to 123. NOTE: When changing any settings, always SUBMIT them by pressing the SAVE button on the bottom of the page. You must reboot the phone for the changes to take effect. DEFINITIONS This section describes the options in the Web configuration user interface. As mentioned, you can log in as an administrator or an end-user. Status: Displays the Account status, Network status, and System info of the phone Account (1~3): To configure each of the SIP accounts. Advanced Settings: To set General settings, Call Features, Ring Tone, Video Settings and Application Settings. Maintenance: To set Network Settings, Web Access, Upgrade and Provisioning, Syslog, Debug, Language, and Device Manager. STATUS PAGE DEFINTIONS Status/Account Status Account Shows the status of the 3 accounts Number SIP Server Shows the extension number of the SIP account. Shows the URL/IP address and port of the SIP server Grandstream Networks, Inc. GXV3140 USER MANUAL Page 24 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Status Status/Network Status MAC Address Address Type IP Address Subnet Mask Gateway DNS Server NAT Type Status/System Info Product Model Shows the status of the account. The device ID, in HEX format. This is a very important ID for ISP troubleshooting. This field shows the type of address configured: DHCP, Static IP or PPPoE. This field shows the IP address of the GXV-3140. This field shows the subnet mask of the GXV-3140. This field shows the Gateway of the GXV-3140. This field shows the DNS Server of the GXV-3140. This field shows the type of NAT configured. Defines the product model: GXV3140. Hardware Revision Hardware version number: Main Board, Interface Board Code PN Number) Software Version
(Part This field contains the product part number Program: This is the main firmware release number, which is always used for identifying the software (or firmware) system of the phone. Boot: Booting code version number DSP: DSP code version number Base: Base code version number Core: Core code version number GUI-A, GUI-B: GUI interface version number This field shows system up time since the last reboot. System Up Time ADVANCED SETTINGS PAGE DEFINITIONS Advanced Settings/General Settings Local RTP Port This parameter defines the local RTP-RTCP port pair used to listen and transmit. It is the base RTP port for channel 0. When configured, for audio, channel 0 will use this port _value for RTP and the port_value+1 for its RTCP; channel 1 will use port_value+4 for RTP and port_value+5 for its RTCP. For video, channel 0 Grandstream Networks, Inc. GXV3140 USER MANUAL Page 25 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Use Random Port will use port_value+2 for RTP and port_value+3 for its RTCP; channel 1 will use port_value+6 for RTP and port_value+7 for RTCP. The default value is 5004 When set to YES, this parameter will force random generation of both the local SIP and RTP ports. This is usually necessary when multiple GXV-3140s are behind the same full cone NAT. The Default setting is YES. (This parameter must be set to NO before Direct IP Calling will work) STUN Server Keep-alive Intervals (s) This parameter specifies how often the GXV-3140 sends a blank UDP packet to the SIP server in order to keep the ping hole on the NAT router to open. The default setting is 20 seconds. The IP address or Domain name of the STUN server. STUN resolution results are displayed in the STATUS page of the Web UI. Only non-symmetric NAT routers work with STUN. Default STUN server: stun.ipvideotalk.com The NAT IP address used in SIP/SDP messages. This field is blank at the default settings. This should ONLY be used if your ITSP requires it. Use NAT IP SSL Certificate This defines the SSL certificate needed to access certain websites. SSL Private Key This defines the SSL Private key. This defines the SSL private key password. key Private SSL Password Advanced Settings/Call Features Disable Call-Waiting Advanced Settings/Ring Tone Distinctive Ring Tone The default setting is No. If set to Yes, the call waiting feature will be disabled. Disable Call-Waiting Tone The default setting is No. If set to Yes, the call waiting tone will be disabled. Disable Direct IP Call The default setting is No. If set to Yes, Direct IP calling will be disabled. This feature lets you select up to 3 Distinctive Ring Tones that will be played for a specific Caller ID. The GXV will ONLY use selected ring tones for particular Caller IDs. For all other calls, the default system ring tone will be used. If the server supports the Alert-Info header and standard ring tone set (like Bellcore) is specified, then the Caller ID field must be left blank and the ring tone will be used based on the info header from the server Using these settings, users can configure ring or tone frequencies based on parameters from the local telecom provider. By default, they are set to the North Call Progress Tones Grandstream Networks, Inc. GXV3140 USER MANUAL Page 26 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 American standard. Frequencies should be configured with known values to avoid uncomfortable high pitch sounds. Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms) ON is the period of ringing (On time in ms) while OFF is the period of silence. In order to set a continuous ring, OFF should be zero. Otherwise it will ring ON ms and a pause of OFF ms and then repeat the pattern. Up to three cadences are supported. This defines the ring cadence for the phone. The default setting is: c=2000/4000;
The Default value is 15 frames/second. The video frame rate is adjustable based on network conditions. Increasing the frame rate will increase the amount of transferred data significantly therefore consuming more bandwidth. Lack of bandwidth will impair the video due to packet loss. The Default value is 128 kbps. The video bit rate is adjustable based on network conditions. Increasing the video bit rate may improve video quality if the bandwidth permits. Otherwise the video quality will be impaired due to packet loss The Default value is 1400, range from 100 to 1400. It is recommended to use 600~800 if you have an Outbound Proxy or Media Gateway. Frame or TMN8. The Default setting is Frame. TMN8 is good for bandwidths larger than 384kbps Ring Cadence Advanced Settings/Video Settings Video frame rate Video bit rate Video Packet Size Video Rate Control Video Frame Skipping Skips bad video frames as they are received The Default setting is NO. Advanced Settings/Application Settings Weather Update This allows the user to set their preferred location for the weather forecast. City (Zip Code): Enter the zip code of the city the user wishes to receive weather updates. Refresh Interval (m): Set the interval for weather updates. Degree Units: Lets you specify the temperature to be measured in Fahrenheit or Grandstream Networks, Inc. GXV3140 USER MANUAL Page 27 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Celsius. Note: For cities outside of the United States, please locate the corresponding international city code on Yahoo Weather (http://weather.yahoo.com/). Search for the city where you are located, and use the 8 digit city code (located in the web browser address bar as part of the web URL) to configure the phone. Refresh Interval (s): The interval for information refreshing. Update Interval (m): The interval for information updating. Subscribe: Provides a list of RSS feed category for users to subscribe to. RSS Feed (1~3): Enter the URL/IP address of 1-3 websites that the user wish to subscribe to. to users allows configure This Photobucket/Flickr/Phanfare, the online photo album service. Click on ADD and the user will be prompted to enter the username, password for authorization. The user can choose to delete the account later if he/she desires. account login their for The user must register for a Last FM account or have an existing Last FM account. This setting allows users to configure their account login for Last FM. User Name: Enter the username for Last FM account. Password: Enter the password for Last FM account. Start Browser on Boot: Start the embedded mini browser in the LCD once the phone boots up. The default setting is NO. Browser Homepage: Sets the mini browser homepage. RSS News Photo Album Last FM Browser Settings MAINTENANCE PAGE DEFINITIONS Maintenance/Network Settings Address Type This selects the type of IP address assigned: DHCP, PPPoE or Static IP. PPPoE Static IP When PPPoE is selected, the user needs to enter the following: PPPoE Account ID, PPPoE Password, PPPoE Service Name. When Static IP is selected, the user needs to enter the following: IP address, Subnet Mask, Default Gateway, Preferred DNS Server and Alternate DNS Server. Alternate DNS Server This field sets the preferred DNS server for the user. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 28 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Layer 3 Qos Layer 802.1Q/VLAN Tag 2 QoS This field defines the layer 3 QoS parameter. It is the value used for IP Precedence, Diff-Serv or MPLS. The Default value is 0. This field contains the value used for layer 2 VLAN tagging. The Default value is 0. This assigns the priority value of the Layer2 QoS packets. The Default value is 0. Layer 2 QoS 802.1p Priority Value Maintenance/Time Settings NTP Server DHCP Option override NTP server 42 Time Zone Self-Defined Zone Time This parameter defines the URL or IP address of the NTP (Network Time Protocol) server. The GXV3140 phone may obtain the date and time from the server. The default setting is ntp.ipvideotalk.com . Select Yes for the user to allow DHCP Option 2 to override the NTP server if there is one on the LAN. The default setting is NO. This parameter controls the date/time display according to the specified time zone. This parameter allows the users to define their own time zone. The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M3.2.0,M11.1.0 MTZ+6MDT+5, This indicates a time zone with 6 hours offset with 1 hour ahead which is U.S central time. If it is positive (+) if the local time zone is west of the Prime Meridian
(A.K.A: International or Greenwich Meridian) and negative (-) if it is east. M3.2.0,M11.1.0 The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec) The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd Tuesday) The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon, Tues,..,Sat) Therefore, this example is the DST which starts from the second Sunday of March to the 1st Sunday of November. Maintenance/Web Access Access Method This defines the access method for web access: HTTP or secure HTTPS protocol. Port This defines the port for web access. By default, HTTP uses port 80 and HTTPS Grandstream Networks, Inc. GXV3140 USER MANUAL Page 29 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 uses port 443. This field is for customizable web ports. Admin Password This defines the administrator password for web interface access. Only the administrator can configure the Advanced Settings and Account x pages. The password is case sensitive and the maximum password length is 25 characters. This defines the user password for web interface access. User Password Maintenance/Upgrade and Provisioning Lock Update Keypad for The default value is NO. If set to YES, the keypad will be disabled from making any updates. Upgrade Via This field allows the user to choose the firmware upgrade method: TFTP, HTTP or HTTPS. Firmware Server Path Defines the server path for the firmware server. It can be different from the Config Server Path Firmware File Prefix Firmware File Postfix Config File Prefix Config File Postfix DHCP Option override Server 66 Configuration server which is used for provisioning. This is the server path for provisioning; it can be different from the firmware server. This field enables your ITSP to lock firmware updates. If configured, only the firmware with the matching encrypted prefix will be downloaded and flashed into the phone. This field enables your ITSP to lock firmware updates. If configured, only the firmware with the matching encrypted postfix will be downloaded and flashed into the phone. This field enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching encrypted prefix will be downloaded and flashed into the phone. This field enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching encrypted postfix will be downloaded and flashed into the phone. The Default setting is YES. If DHCP option 66 is enabled on the LAN side, the TFTP server can be redirected. Please be very careful when configuring this as the redirection could break the phone if this happens during the firmware upgrade. Automatic Upgrade The default value is NO. Choose YES to enable automatic HTTP upgrade and provisioning. Hour of the day (0-23) Defines the hour of the day to check the HTTP/TFTP server for firmware Grandstream Networks, Inc. GXV3140 USER MANUAL Page 30 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 upgrades or configuration files changes. Day of the week (0-6) Defines the day of the week to check the HTTP/TFTP server for firmware upgrades or configuration files changes. Automatic Rule Upgrade Defines the rules for automatic upgrade: Always Check, when F/W suffix/prefix changes, Skip the Firmware Check. Authenticate Conf File Authenticate configuration file before acceptance. The Default setting is NO. Factory Reset Maintenance/Syslog Syslog Server Syslog Level Maintenance/Debug Capture Trace Press the RESET button to factory reset the phone. The URL/IP address for the syslog server. Select the level of logging for syslog. The default setting is NONE. There are 4 levels: INFO, DEBUG, ERROR and WARNING. Press START to start capturing a trace, and press STOP to abort the capture process. View Trace Press LIST to view the list of captured traces. It will show the time the trace was captured. Click on the name of the file to download and view the trace. Enable Debug Application When set to YES, the trace captured will contain debug messages. The default setting is NO. Selects the language setting for the phone. Maintenance/Language Language Maintenance/Device Manager (LCD) Screen Saver Timeout
(m) Screen Saver Interval
(s) This sets the lapsed idle time needed for the screen saver to appear. The default setting is 5 minutes. The screen saver is a picture slide show. This defines the frequency to change the picture on the screen for the screen saver. The default setting is 10 seconds. This defines the lapsed idle time needed for the LCD to power off automatically in order to save power. The default setting is 15 minutes. LCD Auto Power Off Time (m) Maintenance/Device Manager (Headset) Grandstream Networks, Inc. GXV3140 USER MANUAL Page 31 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Headset TX Gain (dB) Transmission gain. Its a headset setting to control the voice intensity Headset RX Gain (dB) Receive gain. Its a headset setting to control the voice intensity. Maintenance/Device Manager (Camera) Zoom mode Exposure Setting Color Mode White Balance Lens Correction Flicker Control Select the desired camera zoom mode (Tele, optical, digital). Can adjust local video zoom either in mirror mode or during the call (on the fly) by pressing the Left or Right Arrow Key Select the desired Camera Exposure mode based on surroundings. The default setting is set to Auto Select the desired Camera Color Mode (Color or Monochromatic). The default setting is set to Color Select the desired Camera White Balance to be automatic or Fixed. The default setting is set to Auto Correct Camera Lens noise. Default is set to YES. It is recommended to set this parameter to YES to reduce camera lens noise and improve video quality. Reduces flicker of image shot with a video camera caused by luminance fluctuation of an illuminating light source. Users can select 50Hz/60Hz depending on the frequency of the commercial electrical power. The default setting is set to Auto. Maintenance/Device Manager (TV Port) TV Output Select the desired TV Output type (PAL or NTSC). SIP ACCOUNT CONFIGURATION PAGE DEFINITIONS The GXV3140 has three lines that can be configured to accommodate independent SIP accounts. Every SIP account has an individual configuration page. Account/General Settings Account Active Account Name SIP Server Select YES to enable and use the Line. The account name for the user that is displayed on the LCD screen. The IP address of the SIP server or the given domain name of the VoIP service provider. User account information provided by the VoIP service provider; normally similar SIP User ID Grandstream Networks, Inc. GXV3140 USER MANUAL Page 32 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Authenticate ID to a telephone number or an actual telephone number. The authenticate ID for the SIP user. It can differ or be the same as the SIP user ID. Voice Mail UserID Authenticate password The password that the GXV uses to authenticate with the ITSP (SIP) server. After it is saved, this will appear as blank for security reasons. The maximum length is 25 characters. When this is configured, the user can dial to the voicemail server using the MESSAGE button. This ID is normally the feature code for Voice Mail. The Caller ID that will be displayed for the account. If the Video phone has an assigned PSTN number, this field should be set to YES. Otherwise, set it to NO. If YES is set, a user=phone parameter will be attached to the From header in the SIP request to indicate the E.164 number. Name User ID number:
is phone Account/Network Settings Outbound Proxy DNS Mode NAT Traversal Proxy Require IP address or Domain name of the Outbound Proxy, or Media Gateway, or Session Border Controller. Used by the GXV3140 for firewall or NAT penetration in different network environments. If a symmetric NAT is detected, STUN will not work and ONLY an Outbound Proxy will work. The default is set to A Record. If the user wishes to locate the server by DNS SRV, the user may select SRV or NATPTR/SRV. This setting decides whether the NAT traversal mechanism is activated. If it is set to Yes and STUN server is configured, the GXV3140 will route according the STUN server. In this mode, the STUN client embedded in the phone will communicate with the appointed STUN server to examine which type of Firewall/NAT setting is employed. If the type of NAT detected is Full Cone, Restricted Cone or Port-Restricted cone, the phone will try to use public IP addresses and port in all the SIP and SDP messages. If the NAT Traversal(STUN) is configured to be No, but keep-alive, the phone will send an empty SDP packet (without payload data) to the SIP server once in 20 seconds to keep the NAT port open. If an outbound proxy server is used, please configure this to be NO. Notifies the SIP server that the unit is behind a NAT/Firewall. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 33 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Account/SIP Settings SIP Registration Unregister On Reboot Register Expiration (m) Retry Time Wait Registration (s) Local SIP Port Subscribe for MWI Selects whether or not the GXV3140 will send a SIP Register message to the proxy; The default setting is YES. If set to YES, the SIP user registration messages will be cleared on reboot. The default setting is YES. This defines the expiration time of the registration in minutes. The default value is 50 minutes; the maximum value is 65535 minutes (approximately 45 days) and the minimum value is 5 minutes. The wait time for registration retry if registration fails. The default is set to 20 Seconds. The local SIP port for sending and receiving data. The default settings for Account 1/2/3 are 5060/5062/5064. Default is set to No. When selected, a SUBSCRIBE for Message Waiting Indication will be sent out periodically. Session Expiration (s) Session Expiration is the time (in seconds) at which the session is considered timed out if no successful session refresh transaction occurs beforehand. The default value is 180 seconds. MIN-SE (s) The minimum session expiration (in seconds). The default value is 90 seconds. UAC Specify Refresher As a Caller, select UAC to use the phone as the refresher, or select UAS to use the Callee or proxy server as the refresher. UAS Specify Refresher As a Callee, select UAC to use the caller or proxy server as the refresher, or Force INVITE Caller Request Timer Callee Request Timer Force Timer SIP Transport Symmetric RTP Support SIP Instance ID Validate select UAS to use the phone as the refresher. The Session Timer can be refreshed using the INVITE or UPDATE methods. Select Yes to use the INVITE method to refresh the session timer The default setting is Yes. If Yes is selected, the phone will use the session timer when it makes outbound calls if remote party supports session timer. If Yes is selected, the phone will use the session timer when it receives inbound calls with session timer request. If Yes is selected, the timer will be activated even if the other party does not support session timers. If No is selected, the timer will be activated only if the other party supports the timer. To disable the timer, Caller Request timer, Callee request timer and Force Timer should all be set to No. Selects the SIP transport method. There are three types: TCP, UDP and TLS. Selects whether or not RTP is supported. Selects whether or not SIP Instance ID is supported. Incoming This configuration selects whether or not the incoming messages should be Grandstream Networks, Inc. GXV3140 USER MANUAL Page 34 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Messages SIP T1 Timeout SIP T2 Interval Remove OBP route Account/Codec Settings Enable Video from DTMF DTMF Payload Type Preferred Vocoder validated. This configures the timeout period for SIP T1. The default setting is 0.5 Seconds This configures the time interval for SIP T2. The default setting is 4 seconds. The SIP Extension notifies the SIP server that it is behind a NAT/firewall.
--YESAccepts all incoming video, this is the default setting
--NOvideo is disabled. Assigns the mechanism to send DTMF. There are three supported modes: in audio (with DTMF as audio signals), through RTP and through SIP INFO. Sends DTMF using RFC2833. The default is 101. This products supports up to 5 different Vocoders: including G.711(a/) PCMU/PCMA,GSM,G726-32k,G.723.1,G.729A/B and iLBC When this has been configured, the system will select the preferred vocoder from the list and the same order is sent with the SDP messages. The user can change the preferred vocoder priority order by toggling with the up and down buttons. It is recommended to use the default setting PCMU; if other vocoders are chosen, there could be an audio transmission error. Preferred Video Coder Selects the preferred video codec from the available list. It is recommended to H.264Payload type H.263+ Payload type Silence Suppression Voice Frame per TX use H.264 Selects the dynamic H.264 codec payload type (ranges from 96-127). The default setting is 99 Selects the H.263+ codec payload type (ranges from 96-127). The default setting is 103 This controls the G723/G729 silence suppression/VAD. If set to YES, when no audio is detected, the phone will send a small number of VAD packets (instead of audio packets). If Set to NO, this feature is disabled. The default setting is NO. This configures the number of voice frames transmitted per packet. (It is recommended to set this based on the Ethernet IS packet limitation 1500 Byte or 120kb/s) When configuring this, it should be noted that the ptime value for the SDP will change with different configurations here. This value is related to the codec used and the actual frames transmitted during the in payload call. For example: if the codec is configured to be G.723 and Voice Frames per TX is set to 2. Then in the INVITE request, the ptime value for SDP will be 60 ms. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 35 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 This is because the G723 voice frame is 30 ms. Similarly, if the setting is 2 and the codec is G729 or G711 or G726, the ptime value for SDP in the INVITE request will be 20 ms. If the voice frames per TX configuration exceeds the maximum value allowed, the phone will choose the preferred codec and use the maximum value allowed. The maximum values: For PCM is 0 frames (x10ms) ; for G76 is 20 frames (x10 ms); for G723 is 32 frames (x30 ms); for G728/G728 is 64 frames (x10ms) and 64 frames (x2.5 ms) respectively. Adjusting these values will also change the jitter buffer. The phone has an algorithm for setting the jitter buffer and the jitter buffer rate is around 20-200ms. For end-users, it is recommended to use the default setting, as incorrect settings may influence the quality of audio. This defines the encoding rate for G723 vocoder, and can be 6.3Kb/s or 5.3Kb/s. Please confirm with your service provider. Users can select either Fixed or Adaptive based on network conditions. The default is Adaptive. User can select Low, Medium, or High based on network conditions. The default is Medium. Sets the prefix added to each dialed number. Dial Plan Rules:
1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d 2. Grammar: x - any digit from 0-9;
G723 Rate Jitter Buffer Type Jitter Buffer Length Account/Call Settings Dial Plan Prefix Dial Plan a) xx+ - at least 2 digit numbers b) xx. - only 2 digit numbers c) ^ - exclude d) e) f) <2=011> - replace digit 2 with 011 when dialing g)
[3-5] - any digit of 3, 4, or 5
[147] - any digit of 1, 4, or 7
| - the OR operand Example 1: {[369]11 | 1617xxxxxxx}
Allow 311, 611, and 911 or any 10 digit numbers with leading digits 1617 Example 2: {^1900x+ | <=1617>xxxxxxx}
Block any number of leading digits 1900 or add prefix 1617 for any dialed 7 digit numbers Grandstream Networks, Inc. GXV3140 USER MANUAL Page 36 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Example 3: {1xxx[2-9]xxxxxx | <2=011>x+}
Allows any number with leading digit 1 followed by a 3 digit number, followed by any number between 2 and 9, followed by any 7 digit number OR Allows any length of numbers with leading digit 2, replacing the 2 with 011 when dialed. 3. Default: Outgoing {x+}
Allow any length of numbers. Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
^1900x. - prevents dialing any number started with 1900
<=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by dialing 7 numbers and 1617 area code will be added automatically 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11 digits length 011[2-9]x. - allows international calls starting with 011
[3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911 Note: In some cases where the user wishes to dial strings such as *123 to activate voice mail or other applications provided by their service provider, the *
should be predefined inside the dial plan feature. An example dial plan will be:
{ *x+ } which allows the user to dial * followed by any length of numbers. The default setting is NO. Use only if the proxy supports 484 response. The default is NO. If set to YES, then for Attended Transfer, the Refer-To header uses the transferred targets contact header information. The default setting is NO. If it is set to YES, the GXV3140 will play a beep sound and answer the phone automatically on the speaker. If set to YES, the From header in the outgoing SIP messages will be set to anonymous to block the caller ID from displaying. The default setting is NO. The default setting is NOIf set to YESany anonymous call will be rejectedwith 486Busy message There are four ring tones to choose from:
1 system ring tone: After selecting this, all calls will have the same ring tone. 3 custom ring tones: The phone will have different ring tones according to the caller. The default setting is Standard; different features can be selected depending on Early Dial Refer to Use Target Contact Auto Answer Send Anonymous Call Anonymous Rejection Account Ring Tone Special Feature Grandstream Networks, Inc. GXV3140 USER MANUAL Page 37 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 the user needs. The default is set to YES. If set to NO, the call features are disabled. Sets the number to forward to unconditionally. Sets the number to forward to when busy. Sets the number to forward to when no answer. The wait time before transferring the call to another extension or to voicemail;
the default setting is 20 seconds. Defines the time out duration on no key entry. Default setting is 4 seconds. Defines the time out duration on no answer. Default setting is 60 second. Defines whether or not the call is transferred to the other party if the initiator of the conference hangs up. Default setting is set to No. Selects whether or not # is used as Send. Forward Enable Call features Call Unconditional Call Forward When Busy Call Forward When No Answer Delayed Call Forward Wait Time (s) No Key Entry Timeout
(s) Ring Timeout (s) Transfer Conference Hangup on Use # as Dial Key Grandstream Networks, Inc. GXV3140 USER MANUAL Page 38 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 SAVING THE CONFIGURATION CHANGES After users makes changes to the configuration, press the Save button in the Configuration Menu. The web browser will then display a message window to confirm the saved changes. Reboot the phone for the new settings to take effect. REBOOTING FROM REMOTE LOCATIONS Press the Reboot button at the top right-hand corner of the configuration menu to reboot the phone remotely. The web browser will then display a message window to confirm with the user if they wish to reboot the phone or not. Click on Yes and the phone will reboot. Wait 30 seconds to log in again. CONFIGURATION THROUGH A CENTRAL SERVER The Grandstream GXV3140 can be automatically configured from a central provisioning system. When the GXV3140 boots up, it will send TFTP or HTTP request to download a configuration file, cfg000b82xxxxxx, where 000b82xxxxxx is the MAC address of the GXV3140. The configuration data can be downloaded from the central server via TFTP or HTTP/HTTPS. A service provider or an enterprise with larger deployments of Grandstream devices can easily manage the configuration and service provisioning of individual devices remotely from a central server. Grandstream has a central provisioning system called GAPS (Grandstream Automated Provisioning System). GAPS supports automatic configuration of Grandstream devices. GAPS use enhanced (NAT friendly) TFTP or HTTP (thus no NAT issues) and other communication protocols to communicate with each individual Grandstream device. Grandstream provides GAPS service to VoIP service providers. GAPS can be used for either simple redirection or with certain special provisioning settings. At boot-up, Grandstream devices by default point to the Grandstream provisioning server (GAPS). Based on the unique MAC address of each device, GAPS will provision the devices with redirection settings so that they will be redirected to customers TFTP or HTTP server for further provisioning. Grandstream also provides the GAPSLITE software package which contains our NAT friendly TFTP server and a configuration tool to facilitate the task of generating device configuration files. The GAPSLITE configuration tool is now free to end users. The tool and configuration templates are available for download from http://www.grandstream.com/configurationtool.html Grandstream Networks, Inc. GXV3140 USER MANUAL Page 39 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 LCD MENU AND FEATURES The GXV3140 has a user-friendly LCD Menu and multiple features that provide the users with convenient tools/applications for both work and personal entertainment. In other words, the GXV3140 acts as your personal assistant in many different ways. The LCD MENU and Features will be explored in more detail below. PHONE BOOK FEATURES Users can manage their contacts through the phone book. The phone book supports features such as adding, deleting, modifying contacts as well as downloadable phone book from the TFTP/HTTP server. To access the phonebook, the user can select the OK button or F1 (soft key corresponding to MENU) to access MENU and select Phonebook. The user may also access the phonebook with the Phonebook button on the phone. Grandstream Networks, Inc. GXV3140 USER MANUAL FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Select the Phone book to display the figure below:
As shown in the figure above, every contact contains an Extension number, Phone number, Mobile number, Fax number and the group it belongs to. On the lower right hand corner, it shows that the total capacity of the phone book is 500 contacts, as well as the number of used contacts. The user may dial the contact by pressing F1, and can search for a contact by pressing F2. When searching, the user needs to enter the user name to search and press OK to confirm. Press F3 to access Options, shown in the figure below:
As shown in the figure above, Select New to add a new contact; Select Edit to modify an existing entry. The screen will display the figure below. Users can add the entry to the phonebook and associate a picture taken by the screenshot feature as a thumbnail image for the contact. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 41 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 In Options, select Delete to delete the contact, select Delete All to delete all of the contacts in the phone book. In addition to manually adding each phonebook entry, the GXV3140 enables you to share and maintain the phonebook (by means of a XML phonebook) through the web easily. The XML phonebook must be stored on a web-server. There are also applications where organizations will want to have a centralized directory server and have all phones in the organization synchronize with the server periodically. To access this feature, select Options-> Download and the screen will display the following:
Please follow the XML Syntax and the Example Phonebook in the next section to compile the phonebook XML file. Also, note that the phonebook file name is fixed to phonebook.xml, so you cannot alter the phonebook file name based on your preference. After compiling your phonebook XML file, place the file Grandstream Networks, Inc. GXV3140 USER MANUAL Page 42 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 under the web server root directory and start the web server. Make sure to specify the Phonebook Download Mode and the Phonebook Download Server path int the phone configuration. When the XML file is downloaded, the phone will parse and extract the entries from it. If the Replace Duplicate Items is set to Off, the device will not replace duplicated items in the phonebook. After the necessary configuration settings are set, navigate to the Download button next to Download Now and press the round OK button on the phone. The GXV3140 will start downloading the XML Phonebook and display the download status message on the phones LCD screen. If the download is successful, the message Download successful! will be displayed. This means that all of the phonebook entries in the XML file are now stored in the GXV3140 phonebook. If the user encounters some error messages, please check the correctness of syntax and the filename for the XML file. XML Syntax
<?xml version="1.0" encoding="utf-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="AddressBook">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="version" type="xsd:integer" />
<xsd:element minOccurs="0" maxOccurs="unbounded" ref="Contact" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Contact">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" />
<xsd:element name="LastName" type="xsd:string" />
<xsd:element minOccurs="0" maxOccurs="4" ref="Phone" />
<xsd:element name="Group" type="GroupIndex" />
<xsd:element name="PhotoUrl" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Phone">
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 43 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
<xsd:complexType>
<xsd:sequence>
<xsd:element name="phonenumber" type="xsd:string" />
<xsd:element name="accountindex" type="AccountIndex" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:simpleType name="AccountIndex">
<xsd:restriction base="xsd:integer">
<xsd:minInclusive value="0" />
<xsd:maxInclusive value="2" />
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name="GroupIndex">
<xsd:restriction base="xsd:integer">
<xsd:minInclusive value="0" />
<xsd:maxInclusive value="3" />
</xsd:restriction>
</xsd:simpleType>
</xsd:schema>
Example Phonebook File
<?xml version="1.0"?>
<AddressBook>
<version>1</version>
<Contact>
<FirstName>John</FirstName>
<LastName>Doe</LastName>
<Phone>
</Phone>
<Group>0</Group>
<PhotoUrl></PhotoUrl>
</Contact>
<phonenumber>8765432</phonenumber>
<accountindex>0</accountindex>
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 44 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
<Contact>
<FirstName>Lily</FirstName>
<LastName>Lee</LastName>
<Phone>
</Phone>
<phonenumber>8100000</phonenumber>
<accountindex>0</accountindex>
<Phone>
<phonenumber>123</phonenumber>
<accountindex>1</accountindex>
</Phone>
<Group>0</Group>
<PhotoUrl></PhotoUrl>
</Contact>
<phonenumber>8100001</phonenumber>
<accountindex>0</accountindex>
<Contact>
<FirstName>Alan</FirstName>
<LastName>Smith</LastName>
<Phone>
</Phone>
<Group>0</Group>
<PhotoUrl></PhotoUrl>
</Contact>
</AddressBook>
Note 1: If the user is downloading from a local server, please ensure that the TFTP/HTTP settings are correct. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 45 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 CALL HISTORY Users may access the call records of the phone through the Call History. The Call History allows the user to view and manage all calls (Dialed, Received, and Missed). Access the MENU by selecting F1 and select Call History, as shown in the figure below:
Press F1 to Select the Call History, and you will enter a screen similar to the one below:
As shown in the figure above, each user can choose to Dial, Save or Delete a Call Record. The Dial option will allow you to perform a re-dial or dial out to the number. The Save option will save the number to the phone book. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 46 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 MESSAGES The message feature is a text message feature (only English is supported at the moment). If two GXV3140s are registered on the same SIP server, text messages can be sent/received between the two parties. Similarly, if other IP products support this feature, the text message feature can also be used to send/receive messages between the device and the GXV3140. To access this feature, press F1 to select Menu and then select Messages (as shown in the figure below):
Press F1 to Select Messages. The screen should look similar to the one below:
As shown in the figure above, users can create, view and manage their messages. When the user presses F3 to select Options, the user can dial the number of the sender, save the number of the sender, or delete Grandstream Networks, Inc. GXV3140 USER MANUAL Page 47 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 the message(s). When the user receives a message, the following notification will show up on the LCD screen:
Press F3 to Select OK. This will open the message for the user to view. As shown in the figure above, the users can choose to Reply, Forward or Delete the message. SOCIAL NETWORKS The GXV3140 provides support for the Social Network services and includes the following Instant Messaging services: Google Talk, MSN, QQ and Yahoo. This feature is accessible through MENU-> Social Networks->IM. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 48 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Users must have a pre-existing account in order to start using the Instant Messaging feature. Users may manage their accounts by going to Options->Accounts->Manage Accounts (as shown in the figure below). Users will be prompted for login information for the Instant Messaging service of their choice as seen in the figure below. After the user logs in, they can begin to use the instant messenger to chat to their contacts online. For fast and efficient input, users can connect an external keyboard to the phone through the USB port. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 49 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 WEB BROWSER The GXV3140 provides users with a full HTML Web Browser for internet browsing. This is accessible by pressing the F1 button to load the MENU, and then select Web Browser (as shown in the figure below):
After selecting OK, it may take several seconds to load the web browser. The LCD screen should look like the figure below when the web browser is loading:
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 50 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 When the web browser has finished loading, a default page displaying Hello, welcome to GXV3140 shows up on the screen. Users can then press F4, corresponding to the Options, to move Forward and Backward on web pages. By selecting URL under Options, the user can enter the URL of a website. The user can press the F3 button which corresponds to the Tab option to toggle the curser. Similarly, users can choose Zoom under Options to zoom in and zoom out of a webpage. Select Exit to exit the web browser. The figure below shows the screen of the web browser while visiting a website:
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 51 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 MULTIMEDIA The GXV3140 provides Multimedia applications such as Internet Radio, Media player, Photo viewer, Photo album, Gstris and Online Music. Press F1 to select the MENU and scroll to Multimedia (as shown in the figure below):
Select Multimedia by pressing the OK button or Select. The multimedia features are shown in the figure below:
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 52 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
INTERNET RADIO As shown in the figure above, select F1 or OK to load the Internet Radio application. The channels are divided into the following categories: My Favorites, Talk Channels, Music Channels, Sports Channels, Ethnic Channels and Local Radio. The users may select the channels according to their preferences. The screen will look like the figure below:
As shown in the figure above, users can then press the F1 button to adjust the volume. From the Options button (F3), users can "Open an URL" or "Open URL list" for other Internet Radio stations. The user may also Play/Stop, Mute and Minimize the Internet radio. The user can press F4 to Exit the Internet Radio application. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 53 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 In addition, users may configure My Favorites by pressing F2 button for Control. This would bring out a toolbar, where users can add/delete/modify and navigate through the My Favorites playlist (As shown in the figure below).
MEDIA PLAYER The GXV3140 Media Player allows users to play music files through the GXV3140. To access the Media Player, select MENU->Multimedia-> Media Player. (As shown in the figure below):
Press the OK button or F1 to select the Media Player. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 54 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 As shown in the figure above, press F1 to adjust the volume of the media player (Navigate by using the Up and Down buttons). Press F2 to enable the Tab option, this allows the user to move the cursor between the four buttons: Previous, Play, Stop and Next. Press F3 for Options. Users can perform the following operations on the playlist: Add, Remove, Up, Down, Delete and Save. Users can also select the channel for output: Headset, Speaker and Stereo. Configurations such as Loop Play, Full Screen, Mute and Minimize can also be found here. Press F4 to exit.
PHOTO VIEWER The GXV3140 features a Photo Viewer which allows users to conveniently view their photos. This is accessible through Menu->Multimedia->Photo Viewer (as shown in the figure below). Grandstream Networks, Inc. GXV3140 USER MANUAL Page 55 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Press the OK button or F1 to Select the Photo Viewer. After the application loads, the user may select to view pictures from different folders:
The screen will look similar to the figure below when the user loads any picture from a folder (For example, open the first picture from the screenshot folder). Users can choose F1 or F2 to select the Previous or the Next picture. Press F3 for Options, Users can also Zoom, Rotate (Clockwise, Counter Clockwise), Flip (Vertical Flip, Horizontal Flip) the picture as well as display the pictures in a slideshow. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 56 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
PHOTO ALBUM Users can upload, view, or search for photos from online photo albums. The photo album can be accessed by selecting MENU->Multimedia->Photo Album (as shown in the figure below):
Press F1 to Select Photo Album. After the Photo Album is loaded, the following screen will appear;
the user can choose which online photo album to use and press Start to begin activating it. Users must have an existing account with the online photo album or must register for an account with the photo album service providers (i.e. Photobucket, Flickr, Phanfare). Please press Start to start configuring the accounts for the Photo Album and follow the instructions to setup the account. For example, when Flickr is selected, the user will need to Add an Account before the user can Grandstream Networks, Inc. GXV3140 USER MANUAL Page 57 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 upload local photos, view online photos and search for photos on Flickr.
GSTRIS The GXV3140 provides games for the entertainment of users. Under Menu->Multimedia, choose Gstris (As shown in the figure below). Access the Gstris application by pressing F1 (corresponding to Select) or the OK button. Press the F1 and F2 to start/stop or pause the game (as shown in the figure below). Grandstream Networks, Inc. GXV3140 USER MANUAL Page 58 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
ONLINE MUSIC The GXV3140 also provides an Online Music streaming application. The user must have a pre-existing account with LastFm before listening to online music through the GXV3140. Users can select their preferred music genre and listen to it online. To access the Online Music, select MENU->Multimedia-> Online Music (as shown in the figure below):
Press F1 to Select Online Music. After the application loads, the user must first set up their account by accessing Options-> Settings, where the username and password for LastFM will be prompted. The user can then select the musical style that they prefer from the list of available musical styles. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 59 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Press F1 to adjust the volume (see the figure above) and press F3 for Options. In Options, there are several settings: the Play/Stop option will control the music, the Next option will skip the current song and play the next one, the Output option allows you to choose the output channel (Headset, Speaker, Stereo), Mute and Minimize. APPLICATIONS The GXV3140 provides a collection of useful applications for users and can be accessed via MENU. These include the following features: Calendar, Alarm Clock, Calculator, Direct IP Call, File manager, Stock update and Currencies. These features will be introduced in more detail below:
CALENDAR This feature includes adding an event to the calendar, and can be accessed by pressing the F1 button corresponding to the Add an event option on the LCD (as shown in the figure below). Grandstream Networks, Inc. GXV3140 USER MANUAL Page 60 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 As seen in the figure above, users can press F1 to Add New Event, where events such as birthdays may be added to the calendar. Press F2 for Tab, this allows the curser to move from year/month/date on the calendar, so that the date can be adjusted accordingly. Press F3 for Options, where users may view, delete or delete all events. Press F4 to exit the calendar.
ALARM CLOCK The GXV3140 provides users with a flexible alarm clock application. This application allows users to configure a custom alarm tone and configure the alarm time in detail to suit their needs (as shown in the figure below):
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 61 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
CALCULATOR The GXV3140 also includes a Calculator application. To operate the calculator, press the corresponding number on the keypad. The arithmetic operations (e.g. add, subtract, multiply, divide) are defined by the corresponding arrow buttons.
DIRECT IP CALL Another key feature supported on the GXV3140 is Direct IP Calling. In the IP address field, enter the IP address of the other party and press the F3 key which corresponds to the SEND option on the LCD as shown in the next figure:
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 62 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
FILE MANAGER The GXV3140 provides a file manager as a tool to manage files such as music, pictures and documents. Users can manage their documents efficiently through the File Manager. As shown in the figure below, users can access different folders to manage their files. Ringtones and screenshots are stored in separate folders. If a USB device is connected, its contents will also be displayed in the File Manager. Users can copy files by pressing Options-> Copy, and after copying they can choose to paste the files to the desired directory by selecting Options-> Paste.
STOCKS The GXV3140 includes a Stock Market monitoring application that conveniently retrieves current information regarding the stock market. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 63 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 As shown in the figure above, the users can use the Add Stock option by pressing F1. This adds a new stock to the list after you enter the stock symbol. Users can refresh the contents by pressing F2 for Refresh and press F3 for Options to delete or delete all stocks. Also, in Options->Settings, users can define the refresh interval, update interval, color option and enable/disable images.
CURRENCIES Users can use this feature to perform currency conversions. Users must enter the currency to convert from as well as the currency to convert to. Pressing F3 selects OK and starts the conversion process
(as shown in the figure below):
SETTINGS The System Settings allow users to configure settings for Accounts, Network, Time, Display, Maintenance and the Camera. To access the system settings, press F1 to open the MENU and select Settings.
ACCOUNTS SETTINGS This menu lets users configure the three SIP accounts; the same configurations may be completed by accessing the web configuration interface. The LCD account setting page is shown in the figure below:
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 64 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
NETWORK SETTINGS This screen allows users to configure the various network connection settings as well as the VLAN settings. Users may choose to use DHCP, PPPoE or Static IP (as shown in the figure below):
In the Other page, users may choose to set the Preferred DNS server, Layer 3 QoS, Layer 2 QoS 802.1Q/VLAN tag and Layer 2 QoS 802.1 priority value. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 65 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
TIME SETTINGS The GXV3140 allows the time to be updated automatically through an NTP Server. Users must define the Time Zone or use a Self-defined Time Zone. You can also specify the display format for the time and date.
DISPLAY SETTINGS This screen allows the user to adjust the LCD Backlight brightness, LCD Contrast, and LCD Saturation. In addition, users may configure the TV OUT mode (NTSC or PAL) here. Note: After setting TV out to an external source, the phone LCD screen will black out. Please Grandstream Networks, Inc. GXV3140 USER MANUAL Page 66 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
make sure that you have plugged in the external output source before selecting this option. To return the display to the LCD menu, log into the web browser interface and disable TV Out in Device Manager -> TV Output. Otherwise, you will need to reboot the phone to enable the LCD screen. MAINTENANCE There are three tabs on the Maintenance setting screen: Upgrade, Factory Functions and Debug. Users can configure the upgrade mode and firmware server IP address/URL on the upgrade tab. Once this is saved, users can choose to reboot the phone to upgrade the firmware. Similarly, a factory reset can be performed on the Factory Functions tab. A more detailed step-by-step guide will be given in the Restore to Factory Default Settings section that follows. The Factory Functions page provides some testing diagnostics for the LCD, camera and audio on the GXV3140. (As shown in the figure below) Grandstream Networks, Inc. GXV3140 USER MANUAL Page 67 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 The Debug page (as shown in the figure below) contains the built-in debug tools for the GXV3140. The debug tools make it more convenient to obtain corresponding information and traces when the system encounters problems. To start capturing traces, users need to Enable Application Debug and press the Start button next to the Capture Packets option. The captured traces are available for download through the web configuration interface and can be sent to Grandstream support for troubleshooting.
CAMERA This screen allows the user to modify the camera settings for the GXV3140. Settings such as Color Mode, White Balance, Flicker Control and Lens Correction can be configured. (As shown in the figure below) Grandstream Networks, Inc. GXV3140 USER MANUAL Page 68 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 CALL FEATURES
The Call Features menu allows the user to configure Call Forwarding methods (Forward unconditionally, Forward when busy, Forward on no answer) and other features such as Auto-Answer, Call Waiting and DND. Users can configure the three accounts to different call forwarding schemes. Press F1 to Select Call Features and the following screen will be displayed:
Other features include configuration for Auto Answer, Do Not Disturb, Call Waiting, Call Waiting Tone, and Direct IP Call (as shown in the figure below):
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 69 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 After the settings are configured, select Save to save and activate the settings. PERSONALIZE Users may personalize the phone by selecting their preferred screen layout, soft key function, screen display and language settings. To access Personalize, press F1 for MENU, toggle to Personalize and press the OK button to select it.
SCREEN LAYOUT Users can choose between Small Layout, Big Layout, or Custom Layout (by uploading an XML file) by toggling between the Left and Right buttons. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 70 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
SOFTKEY Users can define the soft/function key functions of the Main Screen and Call Screen. There are several soft key functions that the user can select for the 4 function keys. Note: If the user selects the Snapshot option for one of the softkey functions for the Call Screen they can capture a snapshot of the remote party during the call. This picture will be saved in the screenshot folder and can be used as a picture icon for the contact in the Phone Book.
SCREEN SAVER Users can personalize the phone by selecting the screensaver and the desktop background. The interval and the timeout period can also be specified here. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 71 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
LANGUAGE This screen allows users to select the preferred language. Users can download the corresponding Language File from the TFTP/HTTP server to expand to the language selection menu.
MY PROFILE This screen allows users to configure the login username and password for the phone. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 72 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
TONES This screen allows users to configure the alarm tone and the event alert tone for the GXV3140.
WEATHER UPDATE The GXV3140 also includes a weather updates application that provides users with the most up to date information on the weather forecast. Users may set the City (Zip code) to display the weather update for that particular city. In addition, users may also define the refresh interval time
(in minutes) and the preferred temperature units. Note: For cities outside of US, please locate the corresponding international city code on Yahoo Weather (http://weather.yahoo.com/). Search for the city where you are located, and use the 8 digit city code (located in the web browser address bar as part of the web URL) to configure the phone. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 73 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
RSS NEWS The GXV3140 allows users to subscribe to different RSS feeds. The GXV3140 supports up to 3 customized feeds (as shown in the figure below). The user is able to subscribe to news that is relevant to the topic of interest. You can also configure the refresh time of the RSS feeds:
INFO This screen displays the System, Network and Account information. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 74 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 System information such as Product Model, Hardware Version, Part Number, System Up Time and Software Version are displayed here. As shown in the figure above, users can view the Network Information: MAC address, Address Type, IP address, Subnet Mask, Gateway, DNS Server and NAT Type. The number and the status of the three SIP accounts can be viewed here. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 75 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 SOFTWARE VERSION UPGRADE The GXV3140 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP or HTTP, the server name can be the FQDN or IP address format. Examples of valid URLs firmware.mycompany.com:6688/Grandstream/
1. 2. 168.75.215.189 the the server through upgrade software configure keypad menu;
There are two ways to setup a software upgrade server: The Keypad Menu or the Web Configuration Interface. UPGRADE VIA KEYPAD MENU To select Menu->Settings->Maintenance. In the Upgrade subpage, users may then select the upgrade mode and enter the IP address or FQDN of the Firmware server and the System Config server. After making the changes, use the F3 softkey to save the new settings. UPGRADE VIA WEB BROWSER CONFIGURATION PAGE Open a web browser and enter the IP address for the GXV3140. Next, log in with the administrator username and password. Under Maintenance, select Upgrade and provisioning, enter the IP address or the FQDN (URL) of the upgrade server and choose to upgrade via TFTP or HTTP. Save the changes and reboot the unit. At this moment, the LCD will display the progress of the software download/upgrade. Please do not disrupt or power down the unit. Note: The software upgrade will last up to 5 minutes (through the LAN side) and may take longer when upgrading through the Internet (limited by the network bandwidth). Grandstream recommends downloading and upgrading the software in a controlled LAN environment. NO LOCAL TFTP SERVERS For users without a local TFTP server, Grandstream offers a NAT-friendly TFTP server. This enables users to download the latest software upgrades for their phone via this server. Please refer to the webpage:
http://www.grandstream.com/firmware.htm. Each product has its own TFTP server address. Alternatively, users can download a free TFTP or HTTP server and conduct a local firmware upgrade. A free windows version TFTP server is available for download from http://support.solarwinds.net/updates/New-customerFree.cfm or http://tftpd32.jounin.net/. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 76 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Instructions for downloading and using a free TFTP Server:
1. Unzip the firmware files and put all of them in the root directory of the TFTP server. 2. Connect the PC running the TFTP server and the GXV3140 device to the same LAN segment. 3. Launch the TFTP server and go to the File menu -> Configure -> Security to change the TFTP server's default setting from "Receive Only" to "Transmit Only" for the firmware upgrade. 4. Start the TFTP server and configure the TFTP server in the phones web configuration interface. 5. Configure the Firmware Server Path to the IP address of the PC. 6. Update the changes and reboot the GXV3140. End users can also choose to download a free HTTP server from http://httpd.apache.org/ or use Microsoft IIS web server. Note: When the GXV3140 boots up, it will send a TFTP or HTTP request to download the configuration file cfgxxxxxxxxxxxx( xxxxxxxxxxxx is the MAC address of the phone). If it is a normal TFTP or HTTP upgrade, the following messages TFTP Error from [IP ADRESS] requesting cfg000b82023dd4 : File does not exist. Configuration File Download can be ignored in the TFTP/HTTP server log. CONFIGURATION FILE DOWNLOAD Grandstream SIP Devices can be configured via the Web Interface as well as via a Configuration File through TFTP or HTTP/HTTPS. The Config Server Path is the TFTP or HTTP/HTTPS server path for the configuration file. It needs to be set to a valid URL, either in FQDN or IP address format. The Config Server Path can be the same or different from the Firmware Server Path. A configuration parameter is associated with each particular field in the web configuration page. A parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric numbers. i.e., P2 is associated with the Admin Password in the ADVANCED SETTINGS page. For a detailed parameter list, please refer to the corresponding firmware release configuration template. When a Grandstream Devices boots up or reboots, it will issue a request for a configuration file named cfgxxxxxxxxxxxx, where xxxxxxxxxxxx is the LAN side MAC address of the device, i.e., cfg000b820102ab. The configuration file name should be in lower case letters. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 77 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 RESTORE FACTORY DEFAULT SETTINGS WARNING: Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings. Grandstream is not responsible for restoring lost parameters and cannot connect your device to your VoIP service provider. There are two methods to restore the GXV3140 to the factory default settings. RESTORE TO FACTORY DEFAULT SETTINGS VIA LCD MENU The steps to restore the phone to factory default settings through the LCD menu are as follows:
Step 1: Select MENU (F1 or the OK button) to enter into the phone menu and select Settings. (Shown in the figure below) Step 2: Press Select (F1 or the OK button) to enter into the phone Settings menu and select Maintenance.
(Shown in the figure below):
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 78 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Step 3: Press Select (F1 or the OK button) to access the Maintenance page. In the Upgrade tab, press the Down arrow twice to select the Factory Reset option. (Shown in the figure below) Step 4: Press the OK button, the phone will display a warning message. (Shown in the figure below) Grandstream Networks, Inc. GXV3140 USER MANUAL Page 79 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Step 5: Press the OK button again to select OK. The phone will reboot and perform a factory reset. RESTORE TO FACTORY DEFAULT SETTINGS VIA THE WEB INTERFACE Step 1: Login to the system configuration page through a web browser and select Maintenance. From the menu on the left, select Upgrade and Provisioning. This will bring up the upgrade and provisioning page as shown in the figure below. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 80 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 Step 2: At the bottom of the page, click on the Reset button for Factory reset. A dialog box will pop up (as shown in figure below) Click on OK to restore the phone to factory settings. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 81 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 EXPERIENCING THE GXV3140 MULTIMEDIA PHONE When the user boots the phone for the first time, Account 1 will be registered to the IP Video Talk server with a provisioned extension of 810xxxx. If the user has purchased two or more GXV3140 IP Multimedia phone, the phones are able to establish video calls between each other and the user can immediately experience the plug and play nature of the GXV3140. If the user has only one multimedia phone, the user can choose to experience the multimedia features by dialing 0 to establish a video call with the preset extension on the server. As shown in the figure above, area A shows the remote video and area B shows the local video. When the system boots up for the first time, the phone will establish a video call with the server preset extension 0. Users can experience a playback of video on the phone. Thank you again for purchasing Grandstream IP Multimedia phone, it is sure to bring convenience and color to both your business and personal life. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 82 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC 15.105 Class B
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Grandstream Networks, Inc. GXV3140 USER MANUAL Page 83 of 83 FIRMWARE VERSION 1.0.1.18 Updated : 09/2009
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-05-10 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-05-10
|
||||
1 | Applicant's complete, legal business name |
Grandstream Networks, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0020352431
|
||||
1 | Physical Address |
126 Brookline Ave, 3rd Floor
|
||||
1 |
Boston, Massachusetts 02215 USA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
YZZ
|
||||
1 | Equipment Product Code |
GXV3140
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
N****** W****
|
||||
1 | Telephone Number |
1-617********
|
||||
1 | Fax Number |
1-617********
|
||||
1 |
N******@grandstream.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | IP MULTIMEDIA PHONE | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Galanz
|
||||
1 | Name |
L****** H****
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
I******@ecmg-global.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC