Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com In all EU member states, operation of 5150
- 5350 MHz is restricted to indoor use only. For Certification, Warranty and RMA information, please visit www.grandstream.com GWN7630LR Outdoor Long-Range High-Performance 802.11ac Wi-Fi Access Point Quick Installation Guide EN OVERVIEW This long range Wi-Fi access point is designed to provide extended coverage support and is ideal for outdoor Wi-Fi solutions thanks to its waterproof casing and heat resistant technology. The GWN7630LR comes equipped with dual-band 4x4:4 MU-MIMO technology and a sophisticated antenna design for maximum network throughput and extended Wi-
Fi coverage range of up to 300 meters. To ensure easy installation and management, the GWN7630LR uses a controller-less distributed network management design in which the controller is embedded within the products web user interface. The GWN7630LR is also supported by GWN.Cloud, Grandstreams free cloud Wi-Fi management platform. It is the ideal Wi-Fi AP for voice-over-Wi-Fi deployments and offers a seamless connection with Grandstreams Wi-Fi-capable IP phones. With support for advanced QoS, low-latency real-time applications, mesh networks, captive portals, 200+ concurrent clients per AP and dual Gigabit network ports with PoE/PoE+, the GWN7630LR is an ideal Wi-Fi access point for medium wireless network deployments with medium-to-high user density. PRECAUTIONS Do not attempt to open, disassemble, or modify the device. Do not expose this device to temperatures outside range of -30 C to 60 C for operating and -30 C to 70 C for storage. Do not expose the GWN7630LR to environments outside of the following humidity range: 5-95% RH (non-condensing). Do not power cycle your GWN7630LR access point during system boot up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction. PACKAGE CONTENTS 1x Base Bracket 2x Metal Straps 1x Quick Installation Guide 4x Antennas GWN7630LR Access point 4x Screws
(PM 3.0 x 7)
~1~
6x Screw Anchors 6x Screws
(PA 3.5 x 33) GWN7630LR PORTS Port NET/POE NET RESET Description Ethernet RJ45 port (10/100/1000Mbps) supporting PoE/PoE+. Ethernet RJ45 port (10/100/1000Mbps) to your router or another GWN76xx. Factory reset button. Press for 7 seconds to reset factory default settings. POWERING AND CONNECTING THE GWN7630LR GWN7630LR can be powered on using PoE/PoE+ switch using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7630LR. Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch. Network Port RJ45 Ethernet Cable to power over Ethernet
(PoE/PoE+) Switch HARDWARE INSTALLATION GWN7630LR can be mounted on the wall or on a metal bar, Please refer to the following steps for the appropriate installation.
~2~
Wall Mount 1. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7630LR and insert the cover bracket. 2. Connect each antenna to an antenna connector by rotating it clockwise. 3. Attach the Base Bracket with screws (PM 3.0 x 7) on the back of GWN7630LR access point. Pole Mount 1. Connect the Ethernet cable (RJ45) to the correct ports of your GWN7630LR and insert the cover bracket. 2. Connect each antenna to an antenna connector by rotating it clockwise. 3. Attach the Base Bracket with screws (PM 3.0 x 7) on the back of GWN7630LR access point. 1 2 3 4. Insert screws (PA 3.5x33) through the Base Bracket and mark the mounting screw holes on the wall using a pencil. 5. Drill the holes in the spots that you have marked and slide the anchors into the wall. Secure the GWN7630LR access point to the wall by inserting the screws into the anchors. Wall 1 2 3 4. Open the metal straps by turning the locking mechanism counter-
clockwise. You can loosen it by hand or use a flathead screwdriver. 5. Straighten out the end of the metal straps and slide it through the back of the base bracket. 6. Wrap the metal strap around the pole and use a flathead screwdriver to tighten the locking mechanism by turning it clockwise. Pole 4 5
~3~
5 6
~4~
CONNECT TO GWN7630LR DEFAULT Wi-Fi NETWORK GWN7630LR can be used as standalone access point out of box, or after factory reset with Wi-Fi enabled by default. After powering the GWN7630LR and connecting it to the network, GWN7630LR will broadcast a default SSID based on its MAC address GWN[MACs last 6 digits] and a random password. Note: GWN7630LRs default SSID and password information are printed on the sticker at the back of the unit. ACCESSING THE CONFIGURATION INTERFACE A computer connected to the GWN7630LRs SSID, or to the same network as the GWN7630LR can discover and access its configuration interface using one of the below methods:
Method 1: Discover GWN7630LR using its MAC Address 1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the device, or on the package. 2. From a computer connected to same network as the GWN7630LR, type in following address using GWN7630LRs MAC address on your browser https://gwn_<mac>.local Example: If a GWN7630LR has the MAC address 00:0B:82:8C:4D:F8, this unit can be accessed by typing https://gwn_000b828c4df8.local on the browser. Method 2: Discover GWN7630LR using GWN Discovery Tool 1. Download and install GWN Discovery Tool from the following link:
http://www.grandstream.com/tools/GWNDiscoveryTool.zip 2. Open the GWN DiscoveryTool, and click on Scan. 3. The tool will discover all GWN76xx Access Points connected on the network showing their MAC and IP addresses.
~5~
4. Click on Manage Device to be redirected directly to the GWN7630LRs configuration interface, or type in manually the displayed IP address on your browser. 5. Enter username and password to login. (The default administrator username is admin and the default random password can be found at the back sticker on the GWN7630LR). Notes:
Make sure that the GWN7630LR is not already paired with another GWN76xx Access Point as slave, GWN7000 Router Series or GWN. Cloud, otherwise the configuration interface cannot be accessed If the GWN7630LR is already paired, make sure to unpair it first, or do a factory reset. It is customers responsibility to ensure compliance with local regulations for frequency bands, transmit power and others. To manage GWN7630LR over cloud, please refer to https://www. gwn.cloud. The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the device at my_device_ip/gpl_ license. It can also be accessed here:
http://www.grandstream.com/legal/open-source-software To obtain a CD with GPL source code information please submit a written request to info@grandstream.com Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
~6~
For certification information, please refer to User Manuals:
http://www.grandstream.com Common part The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm. Aprs examen de ce matriel aux conformit ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations correspondantes. La distance minimale du corps utiliser le dispositif est de 20cm. U.S. FCC Part 15 Regulatory Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Canada Regulatory Information Radio equipment Operation of 5150-5250 MHz is restricted to indoor use only. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B)