AGES 14+
A
CHEERSON USER MANUAL NO.CX-12 PLEASE CAREFULLY READ THE INSTRUCTION MANUAL BEFORE FLYING hium Battery Safety Instruction Z\WARNING:
Under the condition of non-operation, charging to the lithium batter may cause fire or injury or loss of property. The user should well notice the risk hidden when using this kind of product. The manufacturer or sales agent or retailer won't take any responsibility for any accident happened, Please read carefully the safe guidance and charging instruction before using this produc Please put the battery on the place where is far away from the children or pet. User on or less than 18 years old should use this product under the guidance of adult, Children under 14 years old should not operate it by its own:
Guarantee of the Lithium Battery:
The guarantee of this product is only for the raw materials and workshop but no guarantee is given to this product. Under any circumstances, our company won't compensate the amount that higher than the retail pric value. 1.Itis highly forbidden to charge it for a long time under unattended condition so as to avoid the accident. 2.Please use the original charger included for charging this product 3 Itis highly forbidden to decompose or disassemble the battery. 4 Batteries are forbidden to be used o kept under high temperature or heat source or near the flammable product. 5.When charging the battery, covering the charger or battery is highly forbidden. Please keep ventilation and make sure that it should be charged under the condition of fire safety. 6.If the battery sends out smelly odor or gets heated or deformed or there is any abnormal phenomenon happened during the process of charging, please remove the batteries from the charging device or charger and move to the safety outdoor place (if there are batteries which appear abnormal phenomenon, please DO NOT litter around. Please dispose it by taking safe measure) so as not to cause combustion or explosion. 7 Batteries are forbidden to be stored or transported together with the metallic object. 8 Batteries are forbidden to be thrown into the fire or get heated. 9\Metal is forbidden to connect directly with the + - polarity of the battery. 10.Itis highly forbidden to upside down the + -"polarity of the battery. 1 If there any battery leakage happened or electrolyte liquid mistakenly goes into the eyes, please do not rub the eyes but rinse the eyes with clear water. 12.When the battery is not used, please store it in the cool or dry environment. TEN Cmte Main Rotor Blade Transmitter Power Indicator Ascend/ Descend Forward! Backward) Ascend! Descend (
(Forward! Backward) Trimming Direcion30. Throttle! Aeron
(Left/ Right Sideward Fly!
High-speed and Low-speed) Stick Tumbling Stick Aileron left!
right sideward fly trimming Switch Right Throttle (mode 1) Ei Please fly in the spacious indoor, and make sure there is no obstacles, animals or humans nearby. Please make sure that the appropriate environment should be suitable before flying When flying, DO NOT allow the quad copter beyond your sight The children should be under the guidance of adults when flying Each Functions Introduction of Transmitter Throttle /
Direction/
High-speed and Low-speed Stick Power Indicator Ascend/Descend
(Forward/
Backward) trimming Ascend/ Descend
(Forward/
Backward) /
aileron (left/right sideward fly/ 3D tumbling) stick Aileron left!
right sideward fly trimming Left Throttle (mode 2) DSc lmeeh Scope of control: The flying scope of the fighter is about 30m and if beyond the Scope, it would be out of control Warning: If flying in strong wind, the fighter may go beyond the control scope and the fighter would be out of control. Flight Time: The fighter can fly for about 4 minutes under the condition of full charge and micro wind. Please land and recharge if the flight is powerless. Please refer to the manual to ensure the correct flight operation eet =
Are3 sane ies pesate't usta hat we 2K much obstacles.to sdown abruptly and causing avoid unnectssaty a 3*
The fighter shall fy to keep about im away from the ground asf Peta Gt MBattery Installation in and Charging Ways Note: The battery shall be corectyintalled 25 the postive afd negative pales ponted. 2.Install 2PCS 1.5V AAA alkaline battery
(without battery) 1.Open the battery protective cover of remote control 3.Lock the protective cover of the battery Battery Charging Connect one end of the USB charging line with the fighter battery, then insert the other end of the charging line into the USB port of the computer or any other USB charger. When the USB indicator is ON, that represents it is under charging. When the indicator is OFF, that represents itis fully charged. Besides Apple charger, this USB charging wire can be connected with any other charger. of Smart mobile or movable power or being charged on the USB interface on the car. The voltage of the USB interface is +5+0.5V. 8 Begin to Take Off The correct starting sequences of opening program are as the followings 1.Switch on the transmitter and pull the throttle stick to the lowest point (Figure 1)
(gue) (Figure2) 2.Switch on the power of fighter and put the fighter on the level ground and keep static. The indicator of the fighter will be flashing 3.Switch on the power of the transmitter and the transmitter will send out sounds of DI DI, then push the throttle stick to the highest (as Figure 3 shown). It will send out sound of DI and then pull the throttle stick to the bottom (as Figure 4 shown). At the same time, the indicator of the fighter will stop flashing, Operation and Control Attention: Please avoid losing control. You should bear in mind that you need to operate the control stick slowly when operating the fighter. During the process of controlling, the fighter may lose some power. Therefore, during the courses of flying practice, you need to add some extra power to keep this fighter flying in a certain height. Throttle Control the fighter to make ascending and descending tt Ascend
{} Descend Left throttle Right throttle Steering Rudder Control the left rotation and right rotation of the fighter Right throttle y Left Rotation Rudder Control the forward and backward of fighter Left throttle Left throttle Backward Right throttle a >
Left Right Transverse [| Transverse Left throttle wae . you, the contol direction willbe reversing Sensitivity Settings This model of fighter can realize operating in 3 modes: Junior Level Intermediate Level Advanced Level Gently press the throttle stick to enter into the setting mode:
The beeper on the transmitter sounds DI The fighter enters the junior mode
(sensitivity can be 30%) The beeper on the transmitter sounds DI DI" + The fighter enters the intermediate mode (sensitivity can be 50%) The beeper on the transmitter sounds DI DI DI" > The fighter enters the advanced mode (sensitivity can be 70%) The larger the sensitivity value, the faster the fighter's reaction; the smaller the value, the lower the fighters reaction. eh eh Left throttle Right throttle Aerial Tumbling Skills 3 modes can all be used to perform stunt action in the air, press the control stick and it will send out sound of DI and then enter into the Stunt Mode. Left throttle Right throttle ZXThis mode i CS ee re he eae control stick on the transmitter. In order to better carry out this stunt function and make sure the fighter is one meter height above the ground. The better you can operate stunt action during the process of ascending, thus the fighter will be easier fo keep the height after making stunt action Left side flips Press the control stick, and push the aileron to the left side when hearing the sound of "DI". Left throttle Right side flips Press the control stick, and push the aileron to the right side when hearing the sound of Dr. Right throttle Left throttle Front flips Press the control stick, and push the ascendidescend stick to forward when hearing the sound of DI. Backward Trimming Forward Trimming Left side Left sideward) {trimming ly trimming Right sie|
Right sideward (rimming iy trimming =a \
Accelerator Alignment When the fighter appears unstable flying performance or fly to one direction in a quick drifting speed, this time you need to calibrate the accelerometer. 1 After finishing the decoding between the fighter and the transmitter, the fighter shall be placed on the level ground. 2.Set the sensitivity degree in the senior mode, and push the throttle to the lowest place. 3.Push the throttle/ steering rudder control stick to the left bottom corner and the ascend/descend/aileron control stick to the left up corner. At this time, the indicator of the fighter will be flashing for 1~2 seconds, then the decoding is successful. (Left-hand Throttle) 4.Push the ascend/descend control stick to the left up corner and the throttle/ aileron control stick to the left bottom corner. At this time, the indicator of the fighter will be flashing for 1~2 seconds, then the decoding is successful. (Right-hand Throttle) Pee aeecs Note: If the fighter still keeps drifting to one direction, you can put it on a level surface. Pad several pieces of paper on the deviating direction (The paper quantity required is dependent on the drifting extent in order to adjust the deviating angle of the accelerometer) Stuck Protection and Activation During the course of flying, in the case that it is collided or any other reason which cause jam to the propeller, the battery protecting board of the aircraft will power off automatically so as not to cause damaged or danger. Under the condition that the battery is fully charged, you can switch off the power and just restart it. If the aircraft is not connected with the power after being restarted, it means the battery electricity is not enough to activate the battery. This time you can use the original USB charging wire made in our factory to connect with the power and then simply activate it Geo Common breakdown maintenance of the R/C aircraft Troubleshooting Reasons Maintenance Method No Power and Frequency Conversion Not install the battery correctly with the correct Polarity 1.Check and confirm whether the battery is correctly packed into the box as the polarity showed. 2The power of the battery has already gone out. 2. Replace new battery. Didn't connect the battery of fighter. 1.Connect the battery of fighter. Out of Control 2.Do not fly close to the powerful wind or fy in the windy environment which 2. Too powerful wind. ay lead to the fight limitation during the fight, otherwise, it may disturb your Controlling or fying, 3.Failure in decoding. 3.Try decoding again. 1. The rotation speed of .Push up the throttle stick to blade is too slow. the end. Failure in | 9 Not enough power of the | 2.Charging the fighter's battery ascending | fghter's battery or repiace the battery Landing | Too fast to pull the throttle | Slowly pull down the throttle tooeariy | stick down. stick for smoothly landing, goooooo Non-rechargeable batteries are not to be recharged;
Rechargeable batteries are to be removed from the transmitter before being charged;
Rechargeable batteries are only to be charged under adult supervis Different types of batteries or new and used batteies are not to be mixed;
Exhausted batteries are to be removed fror The supply terminal are not to be short. Packaging has to be kept since it contai ne the transmitter;
ited. portant information. Rechargeable Li-ion Battery Model: 3.7V120mAh ICP 10/16/18 Manufacturing date: YYYY-MM-DD Voltage: 3.7V Capacity: 120mAh
+ red black AX caution
@ Charge only with specified charger
@ Don't heat or dispose of in fire
@ Don't disassemble the battery
@ Don't short circuit "+"-"
MADE IN CHINA Manufacturer: SHIDA BATTERY TECHNOLOGY CO., LTD YYYY-MM-DD Note:"YYYY" represents year, "MM" represents month,
"DD" represents date Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(0) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference i residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.