OverheadBluetoothheadphone User Manual Model:N16 BrandGBLUE FCCID:ZGLN16 BasicOperation 1. Poweron:TurnontheswitchON 2. Poweroff:TurnofftheswitchOFF 3. Pairing mode: Turn on the switch ON until the light flash red and blue rapidly. Select the Bluetoothheadsetmodelonyourmobile,theverifyingcodeis0000. 4. Answercall:Whenyourmobilephonerings,simplepressthemutilfunctionbuttontoanswer. 5. Hangup:Pressthemutilfunctionbuttontohangup. 6. Reject call: Press and hold mutil function button for 2 second when there is a incoming call, thenrejecttoansweracall. 7. Voicedial:Keepingshortpressingthemutilfunctionbuttonthenrelease. 8. Lastcallredialing: Doubleclickmutilfunctionbuttonfor2times. 9. Volume+:Increasevolumebyrapidlypressingvolume+button. 10. VolumeIncreasevolumebyrapidlypressingvolumebutton. 11. Nextsong:KeeppressingtheVolume+tonexttrack. 12. Lastsong:KeeppressingtheVolumetoprevioustrack. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2) this device must accept any interference received, including interference that may cause undesiredoperation. Changes or modifications to this unit not expressly approved by the party responsible for compliancecouldvoidtheuser'sauthoritytooperatetheequipment.