Connect toPC/SteamDeck (%~) G1 Wireless Connection with 2.4G Receiver Connect to Switch (62>) Wired Connection:
Wireless Connection:
1.Start the host then enter the "Controller Settings - Change Grip / Order" page. Wired Connection 1.Set the controller to "W" mode. Button layout Wireless Connection with Bluetooth D-input mode 3.Press and hold the pairing button for 2s, and LED3+LED4 lights will flash quickly. Then P turn on the 2.4G receiver and the indicator will flash. The controller will automatically X-input mode 1. Set the controller to W" mode. Welcome Guide Wireless controller Connect to Android X-input mode 1.Set the controller to "W" mode. swio
(@) 2.Turn on Bluetooth on the Android, and connect to the Xbox Wireless controller. Then the controller LED3&LED4 will be on when connected.
< Settings Bluetooth Bluetooth Now discoverable as iPhone6". MY DEVICES. Xbox Wireless controller |Not Connected (i) 3.Press and hold the Connection button for 2 seconds till theLED light flashes. 4ANext time, set the controller to "W" mode, and press the "Home" button to connect automatically. Hold for 2 seconds
@ Move to gear W Function keybtoard layout 1. [back 10. Vibration setting 2. +/start 11. M button 3. Screenshot 12.Turbo 4. Light setting 13,R5 5, Home 14.L5 OXY 15. RIRB 7.AB 16. R4 8.B/A 17. R2/ZRIRT 9.YIX 18.L4 20. L2/ZL/L2 21. Pairing button 22. Six-axis Assist Shooting switch 23. No Dead Zone switch 24. Trigger Keys High Sensitivity switch 25. SWIIID Gear Buttons assign on Switch/ PC platform:
For Switch For PC D-input mode 1. Set the controller to "W" mode. swio (e) 2.Double-click the pairing button to enter D-input mode, and LED1-4 will flash. 3.Turn on Bluetooth on the host, and select Binbok ultra pro, When connected, LED1+LED2 is on.
< Settings Bluetooth Bluetooth r @
Now discoverable as iPhone6. MY DEVICES Binbok ultra pro Not Connected oO) 1.In TV mode, connect the controller to the dock of the Switch with a USB cable.
) USB Port Host(TV Mode) Gamepad 2.After the wired connect is successful, unplug the USB cable, and press the Home button then the controller will automatically connect wirelessly. USB charging cable Press 2-3 seconds Gamepad Note 1: It is recommended to clear the controller connection records of the host before each connection. Note 2: Ensure that the "Controllers and Sensors" is set to "On", which showed in the "Wired Connect option for "Pro Controller Wired Communication" in the host
"Settings". Connect to macOS (2% >) [el Set the controller to I" mode, and when reconnection, LED1 will flash. When connect successfully, LED1 will stay on. The connection method is the same as Android. Mapping Function Buttons can be set: A/B/X/Y/R/ZR/L/ZL/L3/R3 and direction buttons and left or right joysticks (The 8 directions of the joystick can be mapped separately). Setting 1. Hold the "M button and press any of the "R4/R5/L4/L5" buttons to enter the program-
ming mode. The controller will vibrate and LED1-4 is on. 2. Then press the button or button combination (press orderly) you want. The LED1-4 flashes when you press a button. 3. Press the "M"button or R4/R5/L4/L5 button (the one pressed earlier) to complete the programming. Note 1: Each programmed button(R4/R5/L4/L5) can record up to 21 inputs. (Each press of function buttons is regarded as an input), When the input exceeds 21 times, the pro-
gramming will automatically end, Note 2: The controller will vibrate when you start or end the programming. Cancel Method a:After entering the programming mode, directly press the "M button. Method b: Press the "M" button for 3s. Note 1: The controller will vibrate when you cancel the assign function successfully. Note 2: It has a memory function. When the controller is turned off or restarted, it will remain in its previous setting.lt has a memory function. When the controller is turned off or restarted, it will remain in its previous setting. Press + R on the controller. al Press (A) when you're ready. 2.Set the controller to "S "mode. Swio (e) 3.Press and hold the connection button for 2 seconds till the LED light flashes, and the controller will automatically connect. After a successful connection, the correspond-
ing indicator light number will light up. 4.Next time, set the controller to "S mode, and press the "Home" button to connect automatically.
@ Press Hold for 2 seconds @ Move to gear S Light Setting When the controller is turned on for the first time, all lights are on in a single color. Single Color Mode Colors: Click the Light button to change the color of the lights. Once press for one color. The color order is red-orange-yellow-green-blue-cyan-purple. Note: In any mode, press the "Light" button once, and all lights will return to Single Color Mode. Single Color Gradient Mode:
In Single Color Mode" or lights off state, double-click the Light button, all lights are on the gradient in cycle colors. Double Colors Gradient Mode In Single Color Gradient Mode", double-click the Light" button, The left and right lights are adjacent colors and gradually transform together. Lights Off In Double Colors Gradient Mode", double-click the Light button, and all lights go out. Brightness Adjustment In any mode but not off state, press and hold the Light button for 1 second to start adjusting the brightness (0%-30%-60%-100% cycle). The controller vibrates when shifting to every gear. The brightness will stay on the gear when you re-
lease it, and vibrate when you set it successfully. CA 1.Insert the 2.4G receiver into the computer's USB port. Plug in interface 2. Set the controller to D" mode. Vibration Adjustment 1.There are 4 levels of vibration intensity on the controller: 0%, 30%, 70%, and 100%. 2.Press the "Vibrate" button to adjust the vibration intensity of the controller. It will cycle to 0% after reaching 100%. Note: The controller will vibrate when the adjustment is successful. Turbo Function Setting Hold the "Turbo" button and press any of the A/B/X/Y/L//R/ZL/ZR buttons (for the first time) to turn on the turbo function. The frequency is 12 times per second. Cancel 1. Hold the Turbo button and press any of the A/B/X/Y/L/R/ZL/ZR buttons to turn off the turbo function. 2. Hold the "Turbo" button for 3 seconds to cancel all turbo functions. Note 1: The controller will vibrate for 1s when you turn on/ off the turbo function. Note 2: The turbo function will reset every time when the controller is restarted. Six-axis & Joysticks Calibration 1. In the turn-off state, press and hold the " t "key, "- "key, and "Home" buttons at the same time, and the LED1-2 and LED3-4 alternately flash. 2. Place the controller horizontally, and move the joystick to the right position. 3. Press the "+" key to complete, and the LED goes out. connect and LED3+LED4 is on. The default setting is X-input mode.
@ Hold for 2 seconds 4.Next time, set the controller to "D" mode, and press the "Home" button to connect automatically.
@ Move to gear D 5.Mode switch: Double-click the pairing button to switch to D-input mode. When set successfully, the controller vibrates for 1s, and LED1+LED2 is on. F F F F Six-axis Assist Shooting Function OFF\ON When turning on the function, the six-axis can assist in shooting. The controller will vibrate once when turn on/off. No Dead Zone Mode OFF\ON In this mode, there is no dead zone in the center area of the corresponding joystick. Note: The controller will vibrate once when turn on/off. Trigger Keys High Sensitivity Mode cos OFF\ON When turning on this mode, the L2 and R2 linear triggers have the highest sensitivity and can be triggered immediately upon sensing. Note: The controller will vibrate once when turn on, and vibrate twice when turn off. Reset the Controller Press and hold the pairing key for 10s to reset the controller. The controller will vibrate when set successfully. Basic Operation:
Power On/ Wake Up_|Press the "Home" button. Press and hold the "Home" button for 6 seconds. Power Off (The controller will automaticallyturn off after 5 minutes of inactivity.) Press and hold the pairing button for 2 seconds. The Pairing controller enters pairing mode, and the indicator light flashes. Charging Unconnected | LED1-LED4 flashes slowly. Connected | Corresponding LED light flashes slowly. Unconnected | LED1-LED4 lights up constantly. Fully Charged Connected | Corresponding LED lights up constantly. Low Battery Unconnected | LED1-LED4 flashes quickly. Connected _| Corresponding LED flashes quickly. 1.Set the controller to "W" mode. swio (e) 2.Press and hold the pairing button for 2s, and LED1-4 will flash. 3.Turn on Bluetooth on the host, and select "Xbox Wireless controller. When connected, LED3+LED4 is on. Aas a dence Add a device Make sure that your device is tumed on and discoverable, Select a device below to connect.
(Z2) Xbox Wireless controlier 4.Next time, set the controller to "W"
mode,and press the "Home" button to connect automatically. a
@ Move to gear W Specifications of Controller Modes Mode Platform System Indicator Connection Method S Switch |
Correspondin:
(ED Bluetooth/Wired Ww Android | 2rgroidiO LED 3+ LED 4 Bluetooth/Wired PC/steam | Windows7 Deck & above Isteamos LED3+LED4 indicates Xinput, LED1+LED2 indicates Dinput. 2.4 G Receiver!
Bluetooth/
Wired macOS LED1 Bluetooth Specifications 1, Working voltage: DC2.2-2.8V 2. Input voltage/current: DC5V/380mA 3. Charging time: about 5.5 hours
) Binbok Game o @BINBOKOffcial 4. Continuous running time: about 10 hours 5. Battery capacity: 1000mAh Official Homepage : binbok.com
(Register on this web to activate aftersales.) dX] support@binbok.com Business contact: business@binbok.com Hold for 2 secon 3.Turn on Bluetooth on the host, and select Binbok ultra pro, When connected, LED1+LED2 is on. Add a device Add a device Make sure that your device is turned on and discoverable. Select a device below to connect.
@ Binbok ultra pro Connecting Press Connect if the PIN on Binbok ultra pro matches this one. This device complies with part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction 2.Connect the computer and the controller through a USB cable. The corresponding indicator light will stay on to indicate successful connection. USB cable a+
a) Gamepad 3.When using in PC mode, the actual button mapping is as follows:
SELECT