A B Interfaces Description C Installation A Packing List 1. Dashcam 1 2. Car Charger 1 3. Tape 1 4. Power Cord 1 5. Electrostatic Film 1 6. User Manual 1 2 5 1 2 4 Clean the windscreen and paste the electrostatic lm onto it. Avoid introducing air bubble. Install the dashcam onto the center of the electrostatic lm and connect the dashcam to power. Then route the power cord along the red line. 1. Power Interface 2. Interface for 4G Box 3. Speaker 4. TF Card Slot 5. Recording Indicator (Red/Blue) Solid blue light: recording is normal. Solid red light: recording is abnormal. Flashing light: app is connected. 6. Bracket 7. Lens 8. Microphone
. 9. Reset Button Press the button to reboot the device. Hold the button until prompt sound is heard and the device is restored to defaults. 6 0 X 1 600P 5 2 1 3 4 6 1 3 1 2 3 4 5 6 7 8 9 Insert the car charger into the cigarette lighter, and then insert power cord into USB interface. Adjust the surveillance angle and installation is completed. Dashcam Wi-Fi default parameters:
Wi-Fi name: HIKVISION-F6-XXXX
(XXXX refers to the last four characters of verication code.) Wi-Fi password: 1234567890 D Mobile Phone Connection 1 1 Scan the QR code to download and install HikDashcam app.
Scan QR Code E Bais Function Power on and Power o Connect the dashcam to power via cigarette lighter. The dashcam powers on once you starts up the engine and powers o once you turn o the engine. Since some cigarette charger interfaces may be powered constantly, please make sure that the dashcam stops after you turn o the engine. Otherwise, insucient voltage may occur to vehicle battery. Rrecording Two recording types are provided: Normal Reording and Emergency Recording. Sound and mute recordings are selectable. Sound recording is set as default. You can turn o sound in app. 2 Add the dashcam to app by connecting app to the Wi-Fi of dashcam. Step 1. Run the HikDashcam app. Step 2. Tap Wi-Fi Connection. Step 3. In Wi-Fi list, select the Wi-Fi name of the target dashcam and enter Wi-Fi password to build connection. Step 4. (Optional) You can set the parameters of the dashcam. For iOS system, you need to go to Wi-Fi settings of your phone to connect to the Wi-Fi of dashcam. After connecting to Wi-Fi, the dashcam jumps to editing password interface automatically. Please edit password and activate the dashcam to avoid abnormal recording. 13 4 Specications Model Aperture Pixel Resolution Angle Screen Storage G-Sensor Wi-Fi Bluetooth Sound Recording Power Supply Power Consumption AE-DC5013-F6 1600p@30fps F1.6 5 MP 130 No Yes No Yes 5 VDC, 2 A 3.5 W 5 Operating Temperature and Humidity
-20 C to 70 C, 95%
Installation Type General Dimensions Weight 52 (L) 50 (W) 97 (H) mm (2.0 2.0 3.8) Approx. 135 g (0.3 lb.) TF card, 16 GB to 128 GB Built-in, collision triggered recording and recording lock F Cautions Safety Instruction These instructions are intended to ensure that users can use the product correctly to avoid danger or property loss. The precaution measure is divided into Warnings and Cautions Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected. Cautions In the use of the dashcam, you must be in strict compliance with the local laws and regulations. Keep the user manual properly for future reference. See initial connection of dashcam in user manual. Purchase the TF card from legal channel. To ensure safe and stable data transmission, it is recommended to use TF card of class 10 or above. To protect TF card from damage, shut down the dashcam before installing and uninstalling TF card. If the dashcam is directly connected with the vehicle power system, you are recommended to power o the dashcam when the engine is o. Disconnect cigarette lighter to avoid insucient voltage and abnormal startup. Reconnect cigarette lighter to ensure dashcam work normally when you start the car again. Operating temperature is from -20 C to 70 C (-4 F to 158 F). To protect the dashcam, DO NOT use it in high temperature, low temperature, or high-humidity environment. Keep the dashcam from rain and dust. The manual is subject to update. The functions of dashcam may vary according to dierent device models. 2 3 6 5 2 6 0 X 1600P HikDashcam F6 User Manual G Troublshooting Trouble The dashcam drops easily. Starting dashcam failed. Solution Clean the windscreen before installation. Check whether the vehicle is started and power supply is normal. Check whether the indicator is on. If not, please reconnect cigarette lighter. Restore to defaults: hold Reset button until the prompt sound is heard. The dashcam powers o easily. Make sure the power cord is in good condition. Make sure the power cord is tightly connected to the according interfaces. Recording is abnormal and indicator is unlit. Recording is blurred. Make sure that the dashcam started up successfully. Check whether TF card is inserted. Check the status of TF card, e.g. its format, its lifespan. Change TF card if it is not well. Make sure the protective lm is peeled o. Check whether the windscreen or the lens of dashcam is blurred. Recording is mute. Turn on sound in HikDashcam app. Dashcam reboots itself. Check whether the car charger is equipped with power supply interface of 5 VDC, 2 A. G Troubleshooting H Legal Statement H Legal Statement I Regulatory Information I Regulatory Information Trouble Solution Mobile phone cannot connect to dashcam. The mobile phone cannot display recordings. TF card is not detected when you connect dashcam to computer with the supplied power cord. Wi-Fi connection takes a long time. Dashcam Wi-Fi password is forgotten. Make sure HikDashcam app is installed. Please reconnect dashcam to app. It may be relevant with the player or system of the phone. Please insert TF card into your computer and display the recordings. Dashcam does not support data transmission and the supplied power cord is only for charging. If you need to transfer data, please insert TF card into your computer. It may be caused by the interferrence of the surrounding Wi-Fi signals. Please use the dashcam in an environment of less interferrence. Close unnecessary programs in your phone to release some resources for HikDashcam app and reconnect Wi-Fi. The default password is 1234567890. If you have revisied the password, regain the password by the following steps. 1. Hold the Reset button on dashcam until the prompt sound is heard and the dashcam is restored to defaults. 2. Go to Wi-Fi Connection interface in HikDashcam app. 3. Enter Wi-Fi name and log in with default password 1234567890. 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to rmware updates or other reasons. Please nd the latest version of this Manual at the Hikvision website (http://www.hikvision.com/). Trademarks and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. FCC Information Please take attention that changes or modication not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. The equipment should be installed and operated with a minimum distance 20 cm between the radiator and your body. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specic battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info. UD18020B 7 8 9 10 11 12