all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Users Manual -1 | Users Manual | 4.06 MiB | December 04 2020 | |||
1 2 3 |
|
Users Manual -2 | Users Manual | 1.05 MiB | December 04 2020 | |||
1 2 3 |
|
Internal Photos | Internal Photos | 2.72 MiB | December 04 2020 | |||
1 2 3 |
|
External Photos | External Photos | 545.28 KiB | December 04 2020 | |||
1 2 3 |
|
Label and Label Location | ID Label/Location Info | 578.12 KiB | December 04 2020 | |||
1 2 3 |
|
Authorization Letter | Cover Letter(s) | 119.41 KiB | December 04 2020 | |||
1 2 3 | Block Diagram | Block Diagram | December 04 2020 | confidential | ||||
1 2 3 | Circuit diagram | Schematics | December 04 2020 | confidential | ||||
1 2 3 |
|
Confidentiality Letter | Cover Letter(s) | 93.67 KiB | December 04 2020 | |||
1 2 3 |
|
Declaration Letter | Cover Letter(s) | 193.97 KiB | December 04 2020 | |||
1 2 3 | Operational Description | Operational Description | December 04 2020 | confidential | ||||
1 2 3 |
|
RF Exposure Info | RF Exposure Info | 209.37 KiB | December 04 2020 | |||
1 2 3 |
|
Test Report -1 | Test Report | 5.83 MiB | December 04 2020 | |||
1 2 3 |
|
Test Report -2 | Test Report | 3.08 MiB | December 04 2020 | |||
1 2 3 |
|
Test Report -3 | Test Report | 2.44 MiB | December 04 2020 | |||
1 2 3 |
|
Test Setup Photos | Test Setup Photos | 454.19 KiB | December 04 2020 | |||
1 2 3 |
|
Test Report | Test Report | 1.34 MiB | December 04 2020 |
1 2 3 | Users Manual -1 | Users Manual | 4.06 MiB | December 04 2020 |
DS-K1F600U-D6E Series Enrollment Station Quick Start Guide DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Legal Information 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://
www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. and other Hikvision's trademarks and logos are the properties of Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR i DS-K1F600U-D6E Series Enrollment Station Quick Start Guide PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. ii DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Available Model Product Name Model Description Enrollment Station DS-K1F600U-D6E DS-K1F600U-D6E-F Supports enroll face and card No. Supports enroll face, fingerprint, and card No. Scan the QR code to get the user manual of enrollment station. Note that mobile data charges may apply if Wi-Fi is unavailable. Use only power supplies listed in the user instructions:
Model Manufacturer Standard ADS-26FSG-12 12018EPB ADS-26FSG-12 12018EPI-01 ADS-26FSG-12 12018EPCU ADS-26FSG-12 120EPG MSA-C1500IC12.0-18P-BR SHENZHEN HONOR ELECTRONIC CO LTD SHENZHEN HONOR ELECTRONIC CO LTD SHENZHEN HONOR ELECTRONIC CO LTD SHENZHEN HONOR ELECTRONIC CO LTD MOSO Power Supply Technology Co., Ltd PB PI PCU PG PBR iii DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help To meet RF exposure requirements this device shall be installed to ensure a minimum separation distance of 20cm between the device and people. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. iv DS-K1F600U-D6E Series Enrollment Station Quick Start Guide EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info v DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions:
Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Dangers: Follow these safeguards to prevent serious injury or death. Cautions: Follow these precautions to prevent potential injury or material damage. Danger:
of the nation and region. In the use of the product, you must be in strict compliance with the electrical safety regulations The socket-outlet shall be installed near the equipment and shall be easily accessible. 1. This equipment is not suitable for use in locations where children are likely to be present. 2. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. 3. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). 4. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. 5. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. 6. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. 7. Dispose of used batteries according to the instructions. This equipment is not suitable for use in locations where children are likely to be present. Never place the equipment in an unstable location. The equipment may fall, causing serious personal injury or death. To prevent possible hearing damage, do not listen at high volume levels for long periods. All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard. device. Please make sure that the power has been disconnected before you wire, install or dismantle the When the product is installed on wall or ceiling, the device shall be firmly fixed. vi DS-K1F600U-D6E Series Enrollment Station Quick Start Guide If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. Do not ingest battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Cautions:
drive only. No naked flame sources, such as lighted candles, should be placed on the equipment. The USB port of the equipment is used for connecting to a mouse, a keyboard, or a USB flash The serial port of the equipment is used for debugging only. Keep upside when moving or using the equipment. Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover. Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. vii DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information. Please take care of your card and report card loss in time when card is lost. Multiple card types are supported. Please select an appropriate card type according to the card performance and the usage scenarios. Working temperature: -10 C to 50 C (14 F to 122 F) viii DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Contents Chapter 1 Overview .................................................................................................................... 1 Chapter 2 Appearance ................................................................................................................ 2 Chapter 3 Activation ................................................................................................................... 4 3.1 Activate via Device ................................................................................................................. 4 3.2 Activate via SADP ................................................................................................................... 5 Chapter 4 Select Language .......................................................................................................... 6 Chapter 5 Enroll Administrator's Face ......................................................................................... 7 Chapter 6 Enroll via Device ......................................................................................................... 8 6.1 Enroll Face via Device ............................................................................................................. 8 6.2 Enroll Fingerprint via Device .................................................................................................. 9 6.3 Enroll Card via Device .......................................................................................................... 10 Appendix A. Tips When Collecting/Comparing Face Picture ...................................................... 12 Appendix B. Tips for Scanning Fingerprint ................................................................................. 13 Appendix C. Communication Matrix and Device Command ...................................................... 15 ix DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Chapter 1 Overview Introduction Figure 1-1 Product Appearance The enrollment station can realize multiple user information's enrollment on one device. It supports enrolling face picture, fingerprint (parts of the device model support), 13.56 MHz IC card No., and 125KHz ID card No. Features 3.97-inch LCD touch screen for face recognition, parameters configuration, live view, etc. 2 MP wide-angle dual-lens Face anti-spoofing Deep learning algorithm 2,000 user capacity, 2,000 face capacity, 20,000 card capacity, and 20,000 fingerprint capacity Enrolls data via the device and transmits the data from the device to the platform via TCP/IP protocol. Enrolls data remotely via the client software Stand-alone operation Manage, search and set device data after logging in the device locally Supports communicating with the platform via USB or network. ( This function may vary with different models. ) 1 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Chapter 2 Appearance Figure 2-1 Appearance Table 2-1 Appearance Description No. Description PSAM3 Card Slot (Reserved) PSAM4 Card Slot (Reserved) 1 2 3 4 5 6 7 8 9 10 Screen Camera Supplement Light Camera USB Interface Note Network Interface Power Interface Type-C USB For data import and export. 2 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide No. Description Note For data communication. PSAM Card Slot (Reserved) Debugging Port Note For debugging use only. PSAM Card Slot (Reserved) Fingerprint Module Note Parts of the device models support. Indicator Card Presenting Area 11 12 13 14 15 16 3 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Chapter 3 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows:
The default IP address: 192.0.0.64 The default port No.: 8000 The default user name: admin 3.1 Activate via Device If the device is not activated, you can activate the device after it is powered on. On the Activate Device page, create a password and confirm the password. Tap Activate and the device will be activated. Figure 3-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. After activation, if you need to add the device to the client software or other platforms, you should edit the device IP address. For details, see Communication Settings. 4 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide 3.2 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start Get the SADP software from the supplied disk or the official website http://
www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet. The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details. Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 4. Click Activate to start activation. Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by modifying the IP address manually. 3) Input the admin password and click Modify to activate your IP address modification. 5 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Chapter 4 Select Language After activation, you should select a language. Steps 1. After activation, tap OK on the pop-up window. You will enter the language page. 2. Select a language according to the actual needs. 3. Click Next to save the settings. Figure 4-1 Select Language 6 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Chapter 5 Enroll Administrator's Face After selecting language, you should enroll an administrator's face for further operation. The administrator can login the device backend to manage and configure data. Steps 1. After selecting the language, tap Next on the pop-up window. You will enter the face enrollment page. 2. Enroll the administrator's face. 1) Tap and follow the instructions to enroll the face. Figure 5-1 Face Enrollment Page Make sure that the enrolling face is in face shaped area. 2) Tap to exit the face enrollment page and back to the initial page. Note Note After logging in the device home page, you can enter the Administrator module to edit the administrator's information. For details, see Add Administrator in the user manual. 7 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Chapter 6 Enroll via Device 6.1 Enroll Face via Device Before You Start Power on and activate the device. For details about the activation, see Activation . Enable Face Required in the Enrollment Rule page after logging in the device. For details, see Set Enrollment Rule in the user manual. Steps 1. Tap 2. Optional: If you have added an administrator's face in Add Administrator and enabled Verify by on the initial page. Administrator in Set Enrollment Rule, you should verify the administrator's permission.
- Make sure the face is in the face recognition frame when authentication. Figure 6-1 Authenticate Administrator Page For details about face recognition, see Tips When Collecting/Comparing Face Picture .
- Tap on the right side and enter the administrator's name and password. 3. Enter the User Enrollment page.
- For user not added: Create an employee ID and tap Add or present a card on the card
- For user added: Enter the created employee ID and tap Search or present a card on the card presenting area. presenting area. 4. Enroll face. Note Note 1) Tap 2) Tap to enter the face enrollment page. and follow the instructions to enroll the face. Make sure that face is in the face recognition frame. 3) Optional: Tap 4) Tap to enroll the face again. to complete the face enrollment. 8 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Note For details about face recognition, see Tips When Collecting/Comparing Face Picture . 5. Optional: Tap to edit the employee ID. 6.2 Enroll Fingerprint via Device Before You Start Power on and activate the device. For details about the activation, see Activation . Set fingers in Select Finger in the Enrollment Rule page after logging in the device. For details, see Set Enrollment Rule in the user manual. Steps 1. Tap 2. Optional: If you have added an administrator's face in Add Administrator and enabled Verify by on the initial page. Administrator in Set Enrollment Rule, you should verify the administrator's permission.
- Make sure the face is in the face recognition frame when authentication. Figure 6-2 Authenticate Administrator Page Note For details about face recognition, see Tips When Collecting/Comparing Face Picture .
- Tap on the right side and enter the administrator's name and password. 3. Enter the User Enrollment page.
- For user not added: Create an employee ID and tap Add or present a card on the card
- For user added: Enter the created employee ID and tap Search or present a card on the card presenting area. presenting area. 4. Enroll fingerprint. 1) Tap 2) Select a finger on the Select Finger page. to enter the Select Finger page. 9 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Note You can set fingers in Set Enrollment Rule. 3) Follow the instructions and press a finger on the fingerprint module. If the fingerprint is enrolled, the enrolled fingerprint on Select Finger page will turn to blue. 4) Optional: Tap the enrolled fingerprint (in blue) and tap OK in the dialogue box to clear the enrolled data and enroll a new fingerprint. 5. Optional: Tap to edit the employee ID. 6.3 Enroll Card via Device Before You Start Power on and activate the device. For details about the activation, see Activation . Set Card Number per User and Card No. Length in the Enrollment Rule page after logging in the device. For details, see Set Enrollment Rule in the user manual. Steps 1. Tap 2. Optional: If you have added an administrator's face in Add Administrator and enabled Verify by on the initial page. Administrator in Set Enrollment Rule, you should verify the administrator's permission.
- Make sure the face is in the face recognition frame when authentication. Figure 6-3 Authenticate Administrator Page Note 3. Enroll card. For details about face recognition, see Tips When Collecting/Comparing Face Picture .
- Tap on the right side and enter the administrator's name and password.
- Present card on the card presenting area and tap OK in the dialogue box. Create an employee ID and tap Next.
- Create an employee ID in the input box, and tap Add to enter the User Enrollment page. Tap and present card on the card presenting area.
- Enter the created employee ID and tap Search to enter the User Enrollment page. Tap and present card on the card presenting area. 10 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide 4. Optional: Tap to edit the employee ID. 11 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Appendix A. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below:
Expression Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below. Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function. Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed. Posture In order to get a good quality and accurate face picture, position your face looking at the camera when collecting or comparing face pictures. Size Make sure your face is in the middle of the collecting window. 12 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Appendix B. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger:
You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center. Incorrect Scanning The figures of scanning fingerprint displayed below are incorrect:
Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again. 13 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again. 14 DS-K1F600U-D6E Series Enrollment Station Quick Start Guide Appendix C. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure C-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure C-2 Device Command 15 UD21518B-A
1 2 3 | Users Manual -2 | Users Manual | 1.05 MiB | December 04 2020 |
DS-K1F600U-D6E Series Enrollment Station User Manual DS-K1F600U-D6E Series Enrollment Station User Manual Legal Information 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://
www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. and other Hikvision's trademarks and logos are the properties of Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR i DS-K1F600U-D6E Series Enrollment Station User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. ii DS-K1F600U-D6E Series Enrollment Station User Manual Available Model Product Name Model Description Enrollment Station DS-K1F600U-D6E DS-K1F600U-D6E-F Supports enroll face and card No. Supports enroll face, fingerprint, and card No. Use only power supplies listed in the user instructions:
Model Manufacturer Standard ADS-26FSG-12 12018EPB ADS-26FSG-12 12018EPI-01 ADS-26FSG-12 12018EPCU ADS-26FSG-12 120EPG MSA-C1500IC12.0-18P-BR SHENZHEN HONOR ELECTRONIC CO LTD SHENZHEN HONOR ELECTRONIC CO LTD SHENZHEN HONOR ELECTRONIC CO LTD SHENZHEN HONOR ELECTRONIC CO LTD MOSO Power Supply Technology Co., Ltd PB PI PCU PG PBR iii DS-K1F600U-D6E Series Enrollment Station User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help To meet RF exposure requirements this device shall be installed to ensure a minimum separation distance of 20cm between the device and people. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. iv DS-K1F600U-D6E Series Enrollment Station User Manual EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info v DS-K1F600U-D6E Series Enrollment Station User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions:
Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Dangers: Follow these safeguards to prevent serious injury or death. Cautions: Follow these precautions to prevent potential injury or material damage. Danger:
of the nation and region. In the use of the product, you must be in strict compliance with the electrical safety regulations The socket-outlet shall be installed near the equipment and shall be easily accessible. 1. This equipment is not suitable for use in locations where children are likely to be present. 2. CAUTION: Risk of explosion if the battery is replaced by an incorrect type. 3. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). 4. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. 5. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. 6. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. 7. Dispose of used batteries according to the instructions. This equipment is not suitable for use in locations where children are likely to be present. Never place the equipment in an unstable location. The equipment may fall, causing serious personal injury or death. To prevent possible hearing damage, do not listen at high volume levels for long periods. All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard. device. Please make sure that the power has been disconnected before you wire, install or dismantle the When the product is installed on wall or ceiling, the device shall be firmly fixed. vi DS-K1F600U-D6E Series Enrollment Station User Manual If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. Do not ingest battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) Cautions:
drive only. No naked flame sources, such as lighted candles, should be placed on the equipment. The USB port of the equipment is used for connecting to a mouse, a keyboard, or a USB flash The serial port of the equipment is used for debugging only. Keep upside when moving or using the equipment. Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover. Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. vii DS-K1F600U-D6E Series Enrollment Station User Manual Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information. Please take care of your card and report card loss in time when card is lost. Multiple card types are supported. Please select an appropriate card type according to the card performance and the usage scenarios. Working temperature: -10 C to 50 C (14 F to 122 F) viii DS-K1F600U-D6E Series Enrollment Station User Manual Contents Chapter 1 Overview .................................................................................................................... 1 Chapter 2 Appearance ................................................................................................................ 2 Chapter 3 Activation ................................................................................................................... 4 3.1 Activate via Device ................................................................................................................. 4 3.2 Activate via SADP ................................................................................................................... 5 Chapter 4 Select Language .......................................................................................................... 6 Chapter 5 Enroll Administrator's Face ......................................................................................... 7 Chapter 6 Enroll via Device ......................................................................................................... 8 6.1 Enroll Face via Device ............................................................................................................. 8 6.2 Enroll Fingerprint via Device .................................................................................................. 9 6.3 Enroll Card via Device .......................................................................................................... 10 Chapter 7 Enroll via Client Software .......................................................................................... 12 7.1 Enroll Face via Client Software ............................................................................................. 12 7.2 Enroll Fingerprint via Client Software .................................................................................. 14 7.3 Enroll Card via Client Software ............................................................................................. 17 7.4 Get Person Information from Enrollment Station ................................................................ 20 7.5 Import Person Information in Batch .................................................................................... 21 Chapter 8 Basic Operation ........................................................................................................ 22 8.1 Login by Administrator ......................................................................................................... 22 8.2 Add Administrator ................................................................................................................ 23 8.3 Communication Settings ...................................................................................................... 24 8.4 Manage Enrollment ............................................................................................................. 25 8.5 Basic Settings ....................................................................................................................... 26 8.5.1 Set Time ...................................................................................................................... 26 8.5.2 Set Sound .................................................................................................................... 26 8.5.3 Set Enrollment Rule .................................................................................................... 27 ix DS-K1F600U-D6E Series Enrollment Station User Manual 8.5.4 Other Settings ............................................................................................................. 28 8.6 Set Biometric Parameters .................................................................................................... 29 8.7 Data Management ............................................................................................................... 30 8.7.1 Import User ................................................................................................................. 30 8.7.2 Export Enrolled Data ................................................................................................... 31 8.7.3 Clear Enrolled Data ..................................................................................................... 32 8.8 System Maintenance ............................................................................................................ 32 Appendix A. Tips When Collecting/Comparing Face Picture ...................................................... 34 Appendix B. Tips for Scanning Fingerprint ................................................................................. 35 Appendix C. Communication Matrix and Device Command ...................................................... 37 x DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 1 Overview Introduction Figure 1-1 Product Appearance The enrollment station can realize multiple user information's enrollment on one device. It supports enrolling face picture, fingerprint (parts of the device model support), 13.56 MHz IC card No., and 125KHz ID card No. Features 3.97-inch LCD touch screen for face recognition, parameters configuration, live view, etc. 2 MP wide-angle dual-lens Face anti-spoofing Deep learning algorithm 2,000 user capacity, 2,000 face capacity, 20,000 card capacity, and 20,000 fingerprint capacity Enrolls data via the device and transmits the data from the device to the platform via TCP/IP protocol. Enrolls data remotely via the client software Stand-alone operation Manage, search and set device data after logging in the device locally Supports communicating with the platform via USB or network. ( This function may vary with different models. ) 1 DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 2 Appearance Figure 2-1 Appearance Table 2-1 Appearance Description No. Description PSAM3 Card Slot (Reserved) PSAM4 Card Slot (Reserved) 1 2 3 4 5 6 7 8 9 10 Screen Camera Supplement Light Camera USB Interface Note Network Interface Power Interface Type-C USB For data import and export. 2 DS-K1F600U-D6E Series Enrollment Station User Manual No. Description Note For data communication. PSAM Card Slot (Reserved) Debugging Port Note For debugging use only. PSAM Card Slot (Reserved) Fingerprint Module Note Parts of the device models support. Indicator Card Presenting Area 11 12 13 14 15 16 3 DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 3 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows:
The default IP address: 192.0.0.64 The default port No.: 8000 The default user name: admin 3.1 Activate via Device If the device is not activated, you can activate the device after it is powered on. On the Activate Device page, create a password and confirm the password. Tap Activate and the device will be activated. Figure 3-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. After activation, if you need to add the device to the client software or other platforms, you should edit the device IP address. For details, see Communication Settings. 4 DS-K1F600U-D6E Series Enrollment Station User Manual 3.2 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start Get the SADP software from the supplied disk or the official website http://
www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet. The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details. Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 4. Click Activate to start activation. Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by modifying the IP address manually. 3) Input the admin password and click Modify to activate your IP address modification. 5 DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 4 Select Language After activation, you should select a language. Steps 1. After activation, tap OK on the pop-up window. You will enter the language page. 2. Select a language according to the actual needs. 3. Click Next to save the settings. Figure 4-1 Select Language 6 DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 5 Enroll Administrator's Face After selecting language, you should enroll an administrator's face for further operation. The administrator can login the device backend to manage and configure data. Steps 1. After selecting the language, tap Next on the pop-up window. You will enter the face enrollment page. 2. Enroll the administrator's face. 1) Tap and follow the instructions to enroll the face. Figure 5-1 Face Enrollment Page Make sure that the enrolling face is in face shaped area. 2) Tap to exit the face enrollment page and back to the initial page. Note Note After logging in the device backend, you can enter the Administrator module to edit the administrator's information. For details, see Add Administrator . 7 DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 6 Enroll via Device 6.1 Enroll Face via Device Before You Start Power on and activate the device. For details about the activation, see Activation . Enable Face Required in Set Enrollment Rule after logging in the device backend. Steps 1. Tap 2. Optional: If you have added an administrator's face in Add Administrator and enabled Verify by on the initial page. Administrator in Set Enrollment Rule , you should verify the administrator's permission.
- Make sure the face is in the face recognition frame when authentication. Figure 6-1 Authenticate Administrator Page For details about face recognition, see Tips When Collecting/Comparing Face Picture .
- Tap on the right side and enter the administrator's name and password. 3. Enter the User Enrollment page.
- For user not added: Create an employee ID and tap Add or present a card on the card
- For user added: Enter the created employee ID and tap Search or present a card on the card presenting area. presenting area. 4. Enroll face. Note Note 1) Tap 2) Tap to enter the face enrollment page. and follow the instructions to enroll the face. Make sure that face is in the face recognition frame. 3) Optional: Tap 4) Tap to enroll the face again. to complete the face enrollment. 8 DS-K1F600U-D6E Series Enrollment Station User Manual Note For details about face recognition, see Tips When Collecting/Comparing Face Picture . 5. Optional: Tap to edit the employee ID. 6.2 Enroll Fingerprint via Device Before You Start Power on and activate the device. For details about the activation, see Activation . Set fingers in Select Finger in Set Enrollment Rule after logging in the device backend. Steps 1. Tap 2. Optional: If you have added an administrator's face in Add Administrator and enabled Verify by on the initial page. Administrator in Set Enrollment Rule , you should verify the administrator's permission.
- Make sure the face is in the face recognition frame when authentication. Figure 6-2 Authenticate Administrator Page Note For details about face recognition, see Tips When Collecting/Comparing Face Picture .
- Tap on the right side and enter the administrator's name and password. 3. Enter the User Enrollment page.
- For user not added: Create an employee ID and tap Add or present a card on the card
- For user added: Enter the created employee ID and tap Search or present a card on the card presenting area. presenting area. 4. Enroll fingerprint. 1) Tap 2) Select a finger on the Select Finger page. to enter the Select Finger page. Note You can set fingers in Set Enrollment Rule . 9 DS-K1F600U-D6E Series Enrollment Station User Manual 3) Follow the instructions and press a finger on the fingerprint module. If the fingerprint is enrolled, the enrolled fingerprint on Select Finger page will turn to blue. 4) Optional: Tap the enrolled fingerprint (in blue) and tap OK in the dialogue box to clear the enrolled data and enroll a new fingerprint. 5. Optional: Tap to edit the employee ID. 6.3 Enroll Card via Device Before You Start Power on and activate the device. For details about the activation, see Activation . Set Card Number per User and Card No. Length in Set Enrollment Rule after logging in the device background. Steps 1. Tap 2. Optional: If you have added an administrator's face in Add Administrator and enabled Verify by on the initial page. Administrator in Set Enrollment Rule , you should verify the administrator's permission.
- Make sure the face is in the face recognition frame when authentication. Figure 6-3 Authenticate Administrator Page Note 3. Enroll card. For details about face recognition, see Tips When Collecting/Comparing Face Picture .
- Tap on the right side and enter the administrator's name and password.
- Present card on the card presenting area and tap OK in the dialogue box. Create an employee ID and tap Next.
- Create an employee ID in the input box, and tap Add to enter the User Enrollment page. Tap and present card on the card presenting area.
- Enter the created employee ID and tap Search to enter the User Enrollment page. Tap and present card on the card presenting area. 10 DS-K1F600U-D6E Series Enrollment Station User Manual Note The ID can only be set as the original length. 4. Optional: Tap to edit the employee ID. 11 DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 7 Enroll via Client Software 7.1 Enroll Face via Client Software Before You Start Download and install the client software on your computer before enrollment. Power on and activate the device. For details about the activation, see Activation . Follow the steps below to enroll face. Figure 7-1 Flow Diagram of Enrolling Face Steps 1. Power on the device. 2. Place the device on the desk. 3. Login the client software on the computer. 4. Add an organization. 1) Click Person to enter the Person page. 2) Click Add on the upper left of the page. Figure 7-2 Add Organization 3) Create an organization name. Note Up to 10 levels of organizations can be added. 12 DS-K1F600U-D6E Series Enrollment Station User Manual The added organizations will be displayed in the list on the left of the page. 5. Add person. 1) Select an organization from the list on the left. 2) Click Add on right panel. 3) Set the person's basic information, including the person's name, gender, email, tel, effective period, and remark. Figure 7-3 Add Person Note 6. Set enrollment station. Once the person information is expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors.
If the enrollment station is connected with the platform via USB interface, click Local Collection on the Add window. 1) Enable Verify by Device to check whether the device managed in the client can recognize the face in the photo. 2) Select Enrollment Station from the drop-down list. 3) Click Login and set the enrollment station's user name and password. 4) (Optional) Enable Face Anti-Spoofing and set the liveness level according to your actual needs. 5) Click OK. If the enrollment station is connected with the platform via the network, click Remote Collection on the Add window. 13 DS-K1F600U-D6E Series Enrollment Station User Manual 1) Enable Verify by Device to check whether the device managed in the client can recognize the face in the photo. 2) Select Enrollment Station from the drop-down list. 3) Click Login and set the enrollment station's IP address, port No., user name and password. 4) (Optional) Enable Face Anti-Spoofing and set the liveness level according to your actual needs. 5) Click OK. 1) Face the enrollment station's camera and capture a picture according to the instructions on 7. Enroll face on the device. the enrollment station. to capture again. 2) Click 3) Click OK. 8. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons. 7.2 Enroll Fingerprint via Client Software Before You Start Download and install the client software on your computer before enrollment. Power on and activate the device. For details about the activation, see Activation . Follow the steps below to enroll fingerprint. Figure 7-4 Flow Diagram of Enrolling Fingerprint Steps 1. Power on the device. 2. Place the device on the desk. 3. Login the client software on the computer. 4. Add an organization. 1) Click Person to enter the Person page. 14 DS-K1F600U-D6E Series Enrollment Station User Manual 2) Click Add on the upper left of the page. Figure 7-5 Add Organization 3) Create an organization name. Note Up to 10 levels of organizations can be added. The added organizations will be displayed in the list on the left of the page. 5. Add person. 1) Select an organization from the list on the left. 2) Click Add on right panel. 3) Set the person's basic information, including the person's name, gender, email, tel, effective period, and remark. 15 DS-K1F600U-D6E Series Enrollment Station User Manual Figure 7-6 Add Person Note Once the person information is expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors. 6. On the Credential Fingerprint panel, click +. 7. Set enrollment station.
If the enrollment station is connected with the platform via USB interface, click Local. Figure 7-7 Add Fingerprint Page 16 DS-K1F600U-D6E Series Enrollment Station User Manual
1) Select Enrollment Station as the fingerprint recorder from the drop-down list. 2) Click Login and set the enrollment station's user name and password. 3) Click OK. If the enrollment station is connected with the platform via the network, click Remote 1) Select Enrollment Station as the fingerprint recorder from the drop-down list. 2) Click Login and set the enrollment station's IP address, port No., user name and password. 3) Click OK. 8. Enroll the fingerprint. 1) Click Start to start enrollment. 2) Follow the instructions on the enrollment station to enroll the fingerprint. 3) Click Add to save the enrollment. 9. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons. 7.3 Enroll Card via Client Software Before You Start Download and install the client software on your computer before enrollment. Power on and activate the device. For details about the activation, see Activation . Follow the steps below to enroll card No. Figure 7-8 Flow Diagram of Enrolling Card Steps 1. Power on the device. 2. Place the device on the desk. 3. Login the client software on the computer. 4. Add an organization. 1) Click Person to enter the Person page. 2) Click Add on the upper left of the page. 17 DS-K1F600U-D6E Series Enrollment Station User Manual Figure 7-9 Add Organization 3) Create an organization name. Note Up to 10 levels of organizations can be added. The added organizations will be displayed in the list on the left of the page. 5. Add person. 1) Select an organization from the list on the left. 2) Click Add on right panel. 3) Set the person's basic information, including the person's name, gender, email, tel, effective period, and remark. 18 DS-K1F600U-D6E Series Enrollment Station User Manual Figure 7-10 Add Person Note Once the person information is expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors. 6. On the Add window, Enter Credential Card . 7. Click + Settings . to add the card No. 8. Set enrollment station.
If the enrollment station is connected with the platform via USB interface, click Local. 1) Select Enrollment Station from the drop-down list. 2) Click Login and set the enrollment station's user name and password. 3) Set the RF card type. The device can recognize the checked card type. 4) Click OK. If the enrollment station is connected with the platform via the network, click Remote. 1) Select Enrollment Station from the drop-down list. 2) Click Login and set the enrollment station's IP address, port No., user name and password. 3) Set the RF card type. The device can recognize the checked card type. 4) Click OK. 9. Enter the card No.
- Enter the card number manually.
- Place the card on the card enrollment station and click Read to get the card No. The card number will display in the Card No. field automatically. 10. Select the card type according to actual needs. Normal Card 19 DS-K1F600U-D6E Series Enrollment Station User Manual The card is used for opening doors for normal usage. Duress Card Patrol Card Dismiss Card When the person is under duress, he/she can swipe the duress card to open the door. The door will be unlocked and the client will receive a duress event to notify the security personnel. This card is used for the inspection staff to check the their attendance of inspection. By swiping the card on the specified card reader, the person is marked as on duty of inspection at that time. By swiping the card on the card reader, it can stop the buzzing of the card reader. 11. Click Add. 12. Confirm to add the person.
- Click Add to add the person and close the Add Person window.
- Click Add and New to add the person and continue to add other persons. 7.4 Get Person Information from Enrollment Station You can get the person information from the device for further operations. Steps Note If the person name stored in the device is empty, the person name will be filled with the issued card No. after importing to the client. The gender of the persons will be Male by default. If the card number or person ID (employee ID) stored on the device already exists in the client database, the person with this card number or person ID will not be imported to the client. 1. Enter Person module. 2. Select an organization to import the persons. 3. Click Get from Device. 4. Configure the enrollment station's information.
If the enrollment station is connected with the platform via USB interface, click Local. 1) Select Enrollment Station from the drop-down list. 2) Click Login and set the enrollment station's user name and password. 3) Click OK. If the enrollment station is connected with the platform via the network, click Remote 1) Select Enrollment Station from the drop-down list. 2) If the platform has not added an enrollment station, click Login. If the platform has added an enrollment station, click Change to connect to another enrollment station. 20 DS-K1F600U-D6E Series Enrollment Station User Manual 3) Set the enrollment station's IP address, port No., user name and password. 3) Click OK. 5. Click Get All or Get Partially. Get All Get Partially Import all person's information from the device to the platform. After matching with the platform, all added person's information will be imported to the platform. The person information, including person details, person's fingerprint information (if configured), and the linked cards (if configured), will be imported to the selected organization. 7.5 Import Person Information in Batch You can import the persons information in batch. Steps 1. Enter the Person module. 2. Select an organization to import the person. 3. Click Get from Device. 4. Configure the enrollment station's information.
If the enrollment station is connected with the platform via USB interface, click Local. 1) Select Enrollment Station from the drop-down list. 2) Click Login and set the enrollment station's user name and password. 3) Click OK. If the enrollment station is connected with the platform via the network, click Remote. 1) Select Enrollment Station from the drop-down list. 2) If the platform has not added an enrollment station, click Login. If the platform has added an enrollment station, click Change to connect to another enrollment station. 3) Set the enrollment station's IP address, port No., user name and password. 3) Click OK. 5. Click Export Template and you can export the template to the PC. 6. Edit person's basic information and save. 7. Click Import. Select the file edited in Step 6. The edited basic information will be imported to the client software. What to do next After the basic information is imported to the client software, you should enroll other information such as the face, fingerprint, etc. For details, see Enroll via Client Software . 21 DS-K1F600U-D6E Series Enrollment Station User Manual Chapter 8 Basic Operation 8.1 Login by Administrator Login the device backend to set the device basic parameters. If an administrator is added to the device, you can login by verifying the administrator's permission. Before You Start Add an administrator and add a face picture for the administrator. For details, see Add Administrator . Steps 1. Long tap on the initial page for 3 s to enter the administrator authentication page. 2. Authenticate the administrator's face to enter the home page. Figure 8-1 Authenticate Administrator Page Figure 8-2 Home Page Note The device will be locked for 30 minutes after 5 failed face or password attempts. 3. Optional: Tap 4. Optional: Tap and you can enter the added admin user name and password to login. and you can exit the page and be back to the initial page. 22 DS-K1F600U-D6E Series Enrollment Station User Manual 8.2 Add Administrator The administrator can login the device backend and configure the device parameters. Steps 1. Long tap on the initial page for 3 s and login the device home page. 2. Tap Admin to enter the Administrator page. Figure 8-3 Administrator Page 3. Set the administrator's parameters. and password.
- Edit the super administrator's parameters: Tap admin and edit the super administrator's face
- Add a new administrator: Tap and set the administrator's type, add face and password. Figure 8-4 Administrator Information Page Super Administrator Normal Administrator Contains all management and operation permissions. Supports enrollment management and communication management. During remote configuration, the normal administrator can only gain parameters.
, and verify the administrator's identity via face or password. 4. Tap 23 DS-K1F600U-D6E Series Enrollment Station User Manual Note By default, the system contains a super administrator (admin). You cannot edit its No., name, and type. and you cannot delete it. The admin user has higher permission level than other administrators. The administrator's No. and name cannot be edited on the device. You should authenticate the administrator before editing the other administrator's information. Up to 5 administrators can be added. The face of the super administrator and normal administrator cannot be the same. After verifying the administrator's identity failed for 5 times, the current page will be locked. 8.3 Communication Settings Set the device wired network and wireless network. Set Wired Network Parameters Make sure the device has connected the Ethernet. Long tap on the initial page for 3 s and login the home page. Tap Comm. Wired Network . Set the device IP address, subnet mask, and gateway. Figure 8-5 Set Wired Network Set Wireless Network Parameters The device can connect to the Ethernet via wireless connection. Long tap on the initial page for 3 s and login the home page. Tap Comm. Wi-Fi . Figure 8-6 Wi-Fi Page 24 DS-K1F600U-D6E Series Enrollment Station User Manual After enabling WLAN, you should select a Wi-Fi for connection. Select a Wi-Fi and enable DHCP and enter the Wi-Fi's password to connect. Tap Wi-Fi. Or disable the DHCP function, and enter the Wi-Fi's password, IP address, subnet mask, and gateway. Tap Tap to disconnect the Wi-Fi. to connect the Wi-Fi. to connect the 8.4 Manage Enrollment You can view the enrolled person information and delete the enrolled data. Steps 1. Long tap on the initial page for 3 s and login the home page. Tap Enrollment. Figure 8-7 Enrollment Management Page 2. You can view all enrolled person's information on this page. 3. You can also perform the following operations. Incomplete View Details Face/
Fingerprint/
Card Tap Incomplete and the system will list the persons which have not enrolled all data. Tap a person in the list to view details. Tap enrolled data. to delete the person and all Tap a person in the list to enter the User Information page. You can delete the enrolled data according to actual requirements. Note Only parts of the device models support fingerprint recognition function. Refer to the actual page for details. Search Enter a person's employee ID and tap the search icon, or present a card on the card presenting area. The system will enter the User Information page. 25 DS-K1F600U-D6E Series Enrollment Station User Manual 8.5 Basic Settings 8.5.1 Set Time You can set the device time format and the current time. Long tap on the initial page for 3 s and login the device home page. Tap Basic Time . You can set the device time format and the current time. Figure 8-8 Time Settings Page 8.5.2 Set Sound Enable or disable the Keypad Sound and Voice Volume. You can also adjust the Voice Volume. Long tap on the initial page for 3 s and login the device home page. Tap Basic Sound . You can enable or disable the device keypad sound and voice volume. Voice volume is also adjustable. Figure 8-9 Sound Settings 26 DS-K1F600U-D6E Series Enrollment Station User Manual Note The available volume range is from 0 to 10. The larger the value, the louder the volume. 0 represents disable the voice prompt function. 8.5.3 Set Enrollment Rule Set the enrollment rules before data enrollment. Long tap on the initial page for 3 s and login the home page. Tap Basic Enrollment Rules . Figure 8-10 Enrollment Rules Page The configurable rules and descriptions are as follows:
Verify by Administrator If enabling the function, you should verify the administrator's permission before enrollment. Set the employee ID's length when enrolling a person's information. You must enroll the employee ID when enrolling a person's information. You must enroll the person's name when enrolling a person's information. Set the name's length when enrolling a person's information. Employee ID Length Employee ID Required Name Required Name Length Verify Name Face Required You must enroll the person's face when enrolling a person's information. When enter a name in the enroll user page, the system will compare the name with all names in the database to avoid name duplication. 27 DS-K1F600U-D6E Series Enrollment Station User Manual Set the enrolling fingers when enrolling a person's fingerprint. Set the maximum card number that a person can enroll. Select Finger Card Number per User 8.5.4 Other Settings You can set the device white light brightness, IR light brightness, and video standard. Long tap on the initial page for 3 s and login the device home page. Tap Basic. Figure 8-11 Basic Settings Page White Light Brightness IR Light Brightness Select Language Video Standard Set the supplement white light's brightness. The brightness range is from 1 to 100. 0 refers to turning off the light. 1 refers to the darkest, and 100 refers to the brightest. Set the IR light brightness when the IR light is enabled. The brightness range is from 1 to 100. 0 refers to turning off the light. 1 refers to the darkest, and 100 refers to the brightest. Select the language according to the actual demands. Set the video frame rate when performing live view remotely. After changing the standard, you should reboot the device to take effect. PAL 25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East countries, Europe countries, etc. NTSC 28 DS-K1F600U-D6E Series Enrollment Station User Manual 30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the Philippines, etc. 8.6 Set Biometric Parameters You can customize the face parameters to improve the face recognition performance. The configurable parameters includes face anti-spoofing, liveness security level, pitch angle, yaw angle, pupillary distance, and WDR. Long tap on the initial page for 3 s and login the home page. Tap Biometric. Figure 8-12 Biometric Parameters Page Table 8-1 Face Picture Parameters Description Parameter Face Anti-Spoofing Enable or disable the face anti-spoofing function. If enabling the function, the device can recognize whether the person is a live one or not. Note Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Liveness Security Level After enabling face anti-spoofing function, you can set the matching Pitch Angle Yaw Angle security level when performing live face authentication. The maximum pitch angle when starting face authentication. By default, the angle is 30. The maximum yaw angle when starting face authentication. By default, the angle is 45. 29 DS-K1F600U-D6E Series Enrollment Station User Manual Parameter Pupillary Distance WDR Description The minimum resolution between two pupils when starting face recognition. The actual resolution should be larger than the configured value. By default, the resolution is 40. It is suggested to enable the WDR function if installing the device outdoors. When there are both very bright and very dark areas simultaneously in the view, you can enable the WDR function to balance the brightness of the whole image and provide clear images with details. 8.7 Data Management You can import user list, export user list template, export enrolled data, and clear enrolled data. 8.7.1 Import User Import the user information from the USB flash drive to the device. Before You Start Plug the USB flash drive in the USB interface on the device. Steps 1. Long tap on the initial page for 3 s and login the home page. 2. Tap Data. Figure 8-13 Data Management Page 3. Tap Export Template. The template will be exported to the USB flash drive. 4. Edit the exported table and enroll the user information. 30 DS-K1F600U-D6E Series Enrollment Station User Manual Make sure the edited file is saved in the corresponding folder named "DS-K1F600U-D6E", "DS-
K1F600U-D6E-F", or "DS-K1F600U-D6E-IF" in the root directory of the USB flash drive. Note Note 5. Tap Import User. Up to 2000 users can be imported. Result The system will read the user information in the USB flash drive automatically and import the data to the device. 8.7.2 Export Enrolled Data Export enrolled data from the device to the USB flash drive. Before You Start Plug the USB flash drive in the USB interface on the device. Note of the USB flash drive is more than 512M. The exported user data is a DB file, which cannot be edited. Steps 1. Long tap on the initial page for 3 s and login the home page. 2. Tap Data. The supported USB flash drive format is FAT32. The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free space Figure 8-14 Data Management Page 3. Tap Export Enrolled Data. All enrolled data will be exported to the USB flash drive. 31 DS-K1F600U-D6E Series Enrollment Station User Manual 8.7.3 Clear Enrolled Data Delete all enrolled data in the device, including all face pictures, fingerprints, card, etc. Long tap on the initial page for 3 s and login the home page. Tap Data. Figure 8-15 Data Management Page Tap Clear Enrolled Data to delete all enrolled data in the device, including all face pictures, fingerprints, card, etc. 8.8 System Maintenance You can view the device system information and capacity. You can also restore the system to factory settings, default settings, and reboot the system. Long tap on the initial page for 3 s and login the home page. Tap Maint.. Figure 8-16 Maintenance Page System Information You can view the device information. Note The page may vary according to different device models. Refers to the actual page for details. 32 DS-K1F600U-D6E Series Enrollment Station User Manual Capacity Note page for details. Restore to Default Restore to Factory Upgrade Reboot You can view the number of administrator, user, face picture, card, and event. Parts of the device models support displaying the fingerprint number. Refers to the actual The capacity varies according to the configured enrollment rules. For details about setting enrollment rules, see Set Enrollment Rule . All parameters, except for the communication settings, remotely imported user information, will be restored to the default settings. The system will reboot to take effect. All parameters will be restored to the factory settings. The system will reboot to take effect. Plug the USB flash drive in the device USB interface. Tap Upgrade OK , and the device will read the digicap.dav file in the USB flash drive to start upgrading. The device will reboot after the confirmation. 33 DS-K1F600U-D6E Series Enrollment Station User Manual Appendix A. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below:
Expression Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below. Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function. Do not make your hair cover your eyes, ears, etc. and heavy makeup is not allowed. Posture In order to get a good quality and accurate face picture, position your face looking at the camera when collecting or comparing face pictures. Size Make sure your face is in the middle of the collecting window. 34 DS-K1F600U-D6E Series Enrollment Station User Manual Appendix B. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger:
You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center. Incorrect Scanning The figures of scanning fingerprint displayed below are incorrect:
Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again. 35 DS-K1F600U-D6E Series Enrollment Station User Manual Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again. 36 DS-K1F600U-D6E Series Enrollment Station User Manual Appendix C. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure C-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure C-2 Device Command 37 UD21520B-A
1 2 3 | Label and Label Location | ID Label/Location Info | 578.12 KiB | December 04 2020 |
HIKVISION Enrollment Station Model: DS-K1F600U-D6E-F VP; 12V==1.5A 12345678 WM ee Made in China FCC ID:2ADTD-K1F600UD6EF This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
(1}this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd Address: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
1 2 3 | Authorization Letter | Cover Letter(s) | 119.41 KiB | December 04 2020 |
Hangzhou Hikvision Digital Technology Co., Ltd. Date: 2020-11-09 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:
I, the undersigned, hereby authorize UL-CCIC COMPANY LIMITED to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL-CCIC COMPANY LIMITED on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL-CCIC COMPANY LIMITED as our representative, we still recognize that we are responsible to:
a) comply with the relevant provisions of the certification program;
b) c) d) e) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
make claims regarding certification only in respect of the scope for which certification has been granted;
do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
f) g) h) i) j) use certification only to indicate the products are certified as being in conformity with specified standards;
endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;
take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;
k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:
Company Name: Hangzhou Hikvision Digital Technology Co., Ltd. Contact Name: Xiuying Zhang Title of Person: Senior Certification engineer Address: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China
1 2 3 | Confidentiality Letter | Cover Letter(s) | 93.67 KiB | December 04 2020 |
Hangzhou Hikvision Digital Technology Co., Ltd. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID2ADTD-K1F600UD6EF To Whom It May Concern:
Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Hangzhou Hikvision Digital Technology Co., Ltd. Contact Name: Xiuying Zhang Title of Person: Senior Certification engineer Address: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Date:2020/11/09
1 2 3 | Declaration Letter | Cover Letter(s) | 193.97 KiB | December 04 2020 |
Hangzhou Hikvision Digital Technology Co., Ltd. Address: No.555 Qianmo Road,Binjiang District Hangzhou 310052,China Confirmation Letter We, Hangzhou Hikvision Digital Technology Co., Ltd. The product: Enrollment Station And model No.: DS-K1F600U-D6E-F DS-K1F600U-D6E-FUVS, DS-K1F600U-D6E-FKVO, DS-K1F600U-D6E-FHUN, DS-K1F600U-D6EUHK, DS-K1F600U-D6ECKV,DS-K1F600U-D6EUVS, DS-K1F600U-D6EKVO, DS-K1F600U-D6EHUN,DS-K1F600U-D6E, DS-K1F600U-D6E-
FUHK, DS-K1F600U-D6E-FCKV have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction with DS-K1F600U-D6E-F.The difference lies only the model number and software. Contact Name: Xiuying Zhang Title of Person: Senior Certification engineer
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-12-04 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
2 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | ||
3 | 0.125 ~ 0.125 | DCD - Part 15 Low Power Transmitter Below 1705 kHz |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2020-12-04
|
||||
1 2 3 | Applicant's complete, legal business name |
Hangzhou Hikvision Digital Technology Co., Ltd.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0024149825
|
||||
1 2 3 | Physical Address |
No. 555 Qianmo Road, Binjiang District
|
||||
1 2 3 |
Hangzhou, N/A
|
|||||
1 2 3 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
L******@ul.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
2ADTD
|
||||
1 2 3 | Equipment Product Code |
K1F600UD6EF
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
X****** Z********
|
||||
1 2 3 | Telephone Number |
+86-5********
|
||||
1 2 3 | Fax Number |
+86-5********
|
||||
1 2 3 |
z******@hikvision.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 3 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 3 | DCD - Part 15 Low Power Transmitter Below 1705 kHz | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Enrollment Station | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Listed output power is peak conducted for 802.11b, 802.11g and 802.11n20 modes. Listed output power is average conducted for 802.11n40 mode. This device supports WLAN bandwidths 20 MHz and 40 MHz. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
UL-CCIC Company Limited
|
||||
1 2 3 | Name |
C**** Z******
|
||||
1 2 3 | Telephone Number |
+86 5********
|
||||
1 2 3 |
C******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412 | 2462 | 0.0708 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC | 2422 | 2452 | 0.00644 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 13.56000000 | 13.56000000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 0.12500000 | 0.12500000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC