FCC ID: 2ADTD-TCP440-DB Parking Camera

Parking Camera User Manual Parking Camera User Manual Legal Information 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://

www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. and other Hikvision's trademarks and logos are the properties of Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR i Parking Camera User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. ii Parking Camera User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Condi ions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or iii Parking Camera User Manual mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. iv Parking Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Caution Note Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Provides additional information to emphasize or supplement important points of the main text. v Parking Camera User Manual Safety Instruction Laws and Regulations Use of the product must be in strict compliance with the local laws and regulations. Please shut down the device in prohibited area. Power Supply Use of the product must be in strict compliance with the local electrical safety regulations. Use the power adapter provided by qualified manufacturer. Refer to the product specification for It is recommended to provide independent power adapter for each device as adapter overload detailed power requirements. may cause over-heating or a fire hazard. Make sure that the power has been disconnected before you wire or install the device. To avoid electric shock, DO NOT directly touch exposed contacts and components once the DO NOT use damaged power supply devices (e.g., cable, power adapter, etc.) to avoid electric device is powered up. shock, fire hazard, and explosion. DO NOT directly cut the power supply to shut down the device. Please shut down the device normally and then unplug the power cord to avoid data loss. DO NOT block the power supply equipment to plug and unplug conveniently. Make sure the power supply has been disconnected if the power adapter is idle. Make sure the device is connected to the ground firmly. Transportation, Use, and Storage To avoid heat accumulation, good ventilation is required for a proper operating environment. Store the device in dry, well-ventilated, corrosive-gas-free, no direct sunlight, and no heating source environment. Avoid fire, water, and explosive environment when using the device. Avoid lightning strike for device installation. Install a lightning arrester if necessary. Keep the device away from magnetic interference. Avoid device installation on vibratory surfaces or places. Failure to comply with this may cause device damage. DO NOT touch the heat dissipation component to avoid burns. DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature and humidity requirements, see device specification. vi Parking Camera User Manual Maintenance If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. If the device cannot work properly, contact the store you purchased it or the nearest service center. DO NOT disassemble or modify the device in any way (For the problems caused by unauthorized modification or maintenance, the company shall not take any responsibility). Keep all packaging after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original packaging. Transportation without the original packaging may result in damage to the device and the company shall not take any responsibility. Network Lens Please enforce the protection for the personal information and the data security as the device may be confronted with the network security problems when it is connected to the Internet. Please contact us if network security risks occur. Please understand that you have the responsibility to configure all the passwords and other security settings about the device, and keep your user name and password. DO NOT touch the lens with fingers directly in case the acidic sweat of the fingers erodes the DO NOT aim the lens at the strong light such as sun or incandescent lamp. The strong light can surface coating of the lens. cause fatal damage to the device. Data DO NOT disconnect the power during formatting, uploading, and downloading. Or files may be damaged. vii Parking Camera User Manual Contents Chapter 1 Introduction ............................................................................................................... 1 1.1 Introduction ........................................................................................................................... 1 1.2 Key Feature ............................................................................................................................ 1 Chapter 2 Activation ................................................................................................................... 2 2.1 Default Information ............................................................................................................... 2 2.2 Activate via SADP ................................................................................................................... 2 2.3 Activate via Web Browser ...................................................................................................... 3 Chapter 3 Login .......................................................................................................................... 4 Chapter 4 Capture Configuration ................................................................................................ 5 4.1 Set Capture Parameters ......................................................................................................... 5 4.1.1 Set Vehicle Feature Parameters .................................................................................... 5 4.1.2 Set Image Encoding Parameters .................................................................................... 5 4.1.3 Set Capture Overlay ...................................................................................................... 5 4.2 View Real-Time Picture .......................................................................................................... 7 Chapter 5 Parking Space Detection ............................................................................................. 9 5.1 Set Detection Rules ................................................................................................................ 9 5.2 Set Parking Space Indicator .................................................................................................. 10 5.3 View Parking Space Status ................................................................................................... 12 5.4 Typical Application ............................................................................................................... 12 5.4.1 Internal/External Indicator Application ....................................................................... 12 5.4.2 Internal and External Indicator Application ................................................................ 13 5.4.3 Alternate Indicator Control Application ...................................................................... 14 5.4.4 Special Parking Space Application ............................................................................... 15 Chapter 6 Live View and Local Configuration ............................................................................ 17 6.1 Live View .............................................................................................................................. 17 6.1.1 Start/Stop Live View .................................................................................................... 17 viii Parking Camera User Manual 6.1.2 Select Image Display Mode ......................................................................................... 17 6.1.3 Select Stream Type ...................................................................................................... 17 6.1.4 Switch Lens ................................................................................................................. 17 6.1.5 Capture Picture Manually ........................................................................................... 17 6.1.6 Record Manually ......................................................................................................... 17 6.1.7 Enable Digital Zoom .................................................................................................... 18 6.2 Local Configuration .............................................................................................................. 18 Chapter 7 Storage ..................................................................................................................... 20 7.1 Set FTP ................................................................................................................................. 20 7.2 Set Cloud Storage ................................................................................................................. 21 7.3 Set Listening Host ................................................................................................................. 21 Chapter 8 Encoding and Display ................................................................................................ 23 8.1 Set Video Encoding Parameters ........................................................................................... 23 8.2 Set Image Parameters .......................................................................................................... 24 8.3 Set ROI ................................................................................................................................. 26 8.4 Set OSD ................................................................................................................................ 28 Chapter 9 Network Configuration ............................................................................................. 29 9.1 Set IP Address ...................................................................................................................... 29 9.2 Connect to EHome Platform ................................................................................................ 30 9.3 Set DDNS .............................................................................................................................. 31 9.4 Set Port ................................................................................................................................ 32 9.5 Set Bluetooth ....................................................................................................................... 33 Chapter 10 Serial Port Configuration ......................................................................................... 34 10.1 Set RS-485 .......................................................................................................................... 34 10.2 Set RS-232 .......................................................................................................................... 34 Chapter 11 Alarm Configuration ............................................................................................... 36 11.1 Set Motion Detection ......................................................................................................... 36 11.2 Set Exception Alarm ........................................................................................................... 37 ix Parking Camera User Manual Chapter 12 Safety Management ............................................................................................... 38 12.1 Manage User ...................................................................................................................... 38 12.2 Enable User Lock ................................................................................................................ 38 12.3 Set SSH ............................................................................................................................... 39 12.4 Set HTTPS ........................................................................................................................... 39 12.4.1 Create and Install Self-signed Certificate .................................................................. 39 12.4.2 Install Authorized Certificate ..................................................................................... 39 Chapter 13 Maintenance .......................................................................................................... 41 13.1 View Device Information .................................................................................................... 41 13.2 Upgrade ............................................................................................................................. 41 13.3 Reboot ............................................................................................................................... 41 13.4 Restore Parameters ............................................................................................................ 42 13.5 Synchronize Time ............................................................................................................... 42 13.6 Set DST ............................................................................................................................... 42 13.7 Export Parameters ............................................................................................................. 43 13.8 Import Configuration File ................................................................................................... 43 13.9 Export Debug File ............................................................................................................... 44 x Parking Camera User Manual Chapter 1 Introduction 1.1 Introduction The parking camera (hereinafter referred to as device) is applied in the parking guidance and find my car system to detect whether the parking space is occupied or not and recognize the license plate. It is integrated with the parking space status indicator which can indicates red, green, yellow, blue, cyan, and magenta colors. Red indicates the parking space is occupied, green indicates the parking space is available, and blue indicates the parking space is reserved. The device can be widely applied in the environment with dark light, such as road, warehouse, underground garage, bar, garden, etc. to provide HD display. 1.2 Key Feature Built-in high-performance AI chip, supporting ANPR, detection of the parking space status, and smart analysis of crossing over line, motion detection, etc. HD camera, applied in environment with low illumination such as underground garage. 3D noise reduction to guarantee clean and exquisite image. Smart detection of the parking space status, and smart analysis of crossing over line, motion detection, etc. Energy-saving LED with high brightness and low consumption. Speed recognition in second accuracy to indicate the parking space status in real time and provide accurate available parking space number. Network wiring with easy connection, installation, and maintenance. ROI encoding. Two RJ45 interfaces, supporting connecting cameras in series, and no power cord is needed. Dual-stream. Built-in iBeacon module, supporting indoor positioning and navigation with the help of APP. iOS or Android SDK is provided. 1 Parking Camera User Manual Chapter 2 Activation For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. The device supports multiple activation methods, such as activation via SADP software, web browser, and client software. Note Refer to the user manual of client software for the activation via client software. 2.1 Default Information Device default information are as follows. Default IP address: 192.0.0.64 Default port: 8000 Default user name: admin 2.2 Activate via SADP SADP is a tool to detect, activate, and modify the IP address of the devices over the LAN. Before You Start Get the SADP software from the supplied disk or the official website ( http://

www.hikvision.com/ ), and install it according to the prompts. The device and the computer that runs the SADP tool should belong to the same network segment. The following steps show how to activate one device and modify its IP address. For batch activation and IP address modification, refer to User Manual of SADP for details. Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Enter a new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 4. Click Activate to start activation. 2 Parking Camera User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same network segment as your computer by either modifying the IP address manually or checking Enable DHCP. 3) Enter the admin password and click Modify to activate your IP address modification. 2.3 Activate via Web Browser Use web browser to activate the device. For the device with the DHCP enabled by default, use SADP software or client software to activate the device. Before You Start Ensure the device and the computer connect to the same LAN. Steps 1. Change the IP address of your computer to the same network segment as the device. 2. Open the web browser, and enter the default IP address of the device to enter the activation 3. Create and confirm the admin password. interface. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 4. Click OK to complete activation. 5. Go to the network settings interface to modify IP address of the device. 3 Parking Camera User Manual Chapter 3 Login You can log in to the device via web browser for further operations such as live view and local configuration. Before You Start Connect the device to the network directly, or via a switch or a router. Steps 1. Open the web browser, and enter the IP address of the device to enter the login interface. 2. Enter User Name and Password. 3. Click Login. 4. Download and install appropriate plug-in for your web browser. Follow the installation prompts to install the plug-in. 5. Reopen the web browser after the installation of the plug-in and repeat steps 1 to 3 to login. 6. Optional: Click Logout on the upper right corner of the interface to log out of the device. 4 Parking Camera User Manual Chapter 4 Capture Configuration 4.1 Set Capture Parameters 4.1.1 Set Vehicle Feature Parameters Set vehicle feature parameters when you need to detect the passing vehicle features. Steps 1. Go to Configuration Device Configuration Capture Parameters Vehicle Feature . Figure 4-1 Set Vehicle Feature Parameters 2. Check the vehicle features to be detected. 3. Click Save. 4.1.2 Set Image Encoding Parameters If the captured pictures are not clear, set the resolution of the captured pictures and the picture size. Steps 1. Go to Configuration Device Configuration Encoding and Storage Image Encoding . Figure 4-2 Set Image Encoding Parameters 2. Select Capture Resolution. 3. Enter JPEG Picture Size. 4. Click Save. 4.1.3 Set Capture Overlay If you want to overlay information on the captured pictures, set capture overlay. Steps 1. Go to Configuration Device Configuration Text Overlay Single Picture Overlay . 5 Parking Camera User Manual 2. Check Capture Picture Overlay. 3. Set the font size, color, overlay position, etc. Percentage Figure 4-3 Set Capture Overlay It is the percentage that the overlaid information occupies on the picture. Overlay Number Zeroizing When the overlaid number digits are smaller than the fixed digits, 0 will be overlaid before the overlaid number. E.g., the fixed digits for lane No. is 2. If the lane No. is 1, 01 will be overlaid on the picture. Overlay Plate Close-up Check it, and a license plate close-up picture will be overlaid on the upper left corner of the captured picture. 4. Select the overlay information from the list. The overlay information may vary with different models. The actual device prevails. 5. Set the overlay information. You can edit the type. For some information type, you can edit the detailed information. Note Type Overlay Information 6 Parking Camera User Manual Overlay Position If you select Overlay on the Picture, you can check it. Then the current information will be displayed from a new line. Space Line Break Characters

6. Click Save. Edit the number of space between the current information and the next one from 0 to 255. 0 means there is no space. Edit the number of characters from 0 to 100 between the current information line and the previous information line. 0 means no line break. Adjust the display sequence of the overlay information. 4.2 View Real-Time Picture You can view the real-time captured pictures and information of the captured vehicles. Steps 1. Go to Live View Live Traffic Statistics . 2. Select the captured picture from the picture list, and you can view the capture scene picture and the captured license plate picture. Figure 4-4 Real-Time Picture 7 Parking Camera User Manual 3. You can do the following operations on this interface.

- Select the arming mode. Level 1 Arming can only connect one client or web. The uploaded pictures will not be stored in the storage card. The pictures in the storage card will be uploaded to the level 1 arming. Level 2 Arming can connect three clients or webs. The pictures will be uploaded to the client/web, and stored in the storage card. Disarming is to cancel the alarm status or real-time picture.

- Click Measuring license plate to measure the license plate pixel. After the measurement, click Close measurement. click Disable Rule.

- Click Enable Rule to enable rule when measuring the license plate. After the measurement,

- Click Capture to enable manual capture. The captured pictures will be saved in the set local path. Or you can click Open Folder to view the pictures.

- Click on the right of Continuous Capture to set the continuous capture parameters. After the configuration, click Continuous Capture to capture pictures. Capture Times Up to five times are supported. Continuous Capture Interval Up to four intervals are supported. You can set the time of each interval. 8 Parking Camera User Manual Chapter 5 Parking Space Detection 5.1 Set Detection Rules To detect the parking spaces, you should enable the smart analysis and set the parameters of parking spaces. Steps 1. Go to Configuration Device Configuration Smart Analysis Analytics Parameters 2. Optional: Select Camera if the device supports dual lens. 3. Select the number of Recognized Parking Space(s). Figure 5-1 Smart Analysis Note The number may vary with different models. According to the number of spaces you set, the quadrilateral(s) of the parking space area(s) will appear in the image. 9 Parking Camera User Manual 4. Click the tab of the parking space No. to set the parameters. 1) Enter Parking Space No. 2) Click Yes if the parking space is a special parking space. 5. Adjust the parking space areas. the quadrilateral to adjust the position. 2) Repeat the step above to adjust other areas. 6. Click Save. 5.2 Set Parking Space Indicator 1) Select a quadrilateral, and drag the vertices of the quadrilateral to adjust its shape, or drag The indicator indicates the parking space status. Different colors stand for different status. You can set the indicator colors and flashing status for different parking space status. Steps 1. Go to Configuration Device Configuration Parking Space Indicator Parking Space Indicator . Figure 5-2 Set Parking Space Indicator 2. Select Indicator Control Mode. Internal Indicator External Indicator The parking space status is informed via the internal indicator of the device. The parking space status is informed via the external indicator connected to the device. After the connection, power up the device and the external indicator will start the self-test by indicating red, green, and blue respectively. 10 Parking Camera User Manual Note If the self-test fails, check the cable connection. Internal & External Indicator The internal and external indicators work at the same time. You can respectively set the indicator to inform the status of each parking space. 3. Set the indicator parameters for different parking space status. 1) Optional: Select Indicator Source if you have selected Internal & External Indicator for 2) Enable or disable the indication for different parking space status. Indicator Control Mode. Unoccupied Occupied The parking space is free. The parking space is occupied by a vehicle. Note If you select Internal Indicator or External Indicator, occupied status means all the detected parking spaces are occupied, and unoccupied status means not all the detected parking spaces are occupied. E.g., three parking spaces are detected. When the three spaces are all occupied, the indicator will display the color you set for the occupied status. When two spaces are occupied and one space is unoccupied, the indicator remains the color you set for the unoccupied status. Over Line A vehicle occupied two parking spaces. Special Parking Space The parking space is specified to a certain vehicle. 3) Select Indicator Flicker and Indicator Color for different parking space status. 4. Optional: If there are symmetric parking spaces on both sides, and the distance between the device to the monitored parking space lines is too far, you can enable alternate indicator control and set the parameters. 1) Check Enable of Alternate Indicator Control Parameters. 2) Enter IP Address of the device on the opposite parking space. The current device can control the indicator of the device on the opposite parking space, and vice versa. 5. Click Save. Note For the detailed application of the different indicator control modes, refer to "Typical Application" for details. 11 Parking Camera User Manual 5.3 View Parking Space Status You can view the occupancy status, license plate number, indicator color, etc. of the detected parking spaces. Steps 1. Go to Configuration Device Configuration Parking Space Indicator Parking Space Status . 2. View the parking space status. Figure 5-3 Parking Space Status 5.4 Typical Application In this section, the typical applications of the internal indicator control mode, external indicator control mode, alternate indicator control mode, and special parking space will be illustrated. 5.4.1 Internal/External Indicator Application Note Here we take example of the scene in which a device monitors three parking spaces. In internal/external indicator application, the indicator displays the color of occupied status when the three spaces are all occupied. The indicator displays the color of unoccupied status when any of the spaces is free. The indicator displays the color of over line when a parked vehicle occupies two spaces. 12 Parking Camera User Manual Figure 5-4 Internal Indicator Application Figure 5-5 External Indicator Application 5.4.2 Internal and External Indicator Application Note Here we take example of the scene in which a device monitors three parking spaces. In internal and external indicator application, the internal and external indicators work at the same time. All the indicators display the set colors for different parking space status. E.g., the parking 13 Parking Camera User Manual camera A controls the internal indicator B, the external indicator 2 of parking camera A, and the external indicator 2 of parking camera B, and detects the status of the parking spaces B1 to B3. The parking camera B controls the internal indicator A, the external indicator 1 of parking camera A, and the external indicator 1 of parking camera B, and detects the status of the parking spaces A1 to A3, as shown below. After the settings, the external indicator 2 of parking camera A will display the different status of parking space B1, the internal indicator B will display the different status of parking space B2, and the external indicator 2 of parking camera B will display the different status of parking space B3. The external indicator 1 of parking camera A will display the different status of parking space A1, the internal indicator A will display the different status of parking space A2, and the external indicator 1 of parking camera B will display the different status of parking space A3. Figure 5-6 Internal and External Indicator Application 5.4.3 Alternate Indicator Control Application Note Here we take example of the scene in which two devices monitor six parking spaces. The alternate indicator control is applicable to the parking lot where there are symmetric parking spaces on both sides, and the distance between the device to the monitored parking space lines is too far. E.g., the parking camera A controls the indicator B and detects the status of the parking spaces B1 to B3, while the parking camera B controls the indicator A and detects the status of the parking spaces A1 to A3, as shown below. After the settings, the indicator A/B will display the color of 14 Parking Camera User Manual occupied status when the parking spaces A1 to A3/B1 to B3 are all occupied. The indicator A/B will display the color of unoccupied status when any of the three spaces is free. The indicator A/B will display the color of over line when a parked vehicle occupies two spaces. Figure 5-7 Alternate Indicator Control Application 5.4.4 Special Parking Space Application Note Here we take example of the scene in which a device monitors three parking spaces. E.g., the parking space 1 is set as a special parking space in the monitoring range, and its status is indicated by the external indicator 1 connected to the device. Then the external indicator 1 will display the set color for the special parking space, and the occupied, unoccupied, or over-line status is invalid for the indicator. 15 Parking Camera User Manual Figure 5-8 Special Parking Space Application 16 Parking Camera User Manual Chapter 6 Live View and Local Configuration 6.1 Live View 6.1.1 Start/Stop Live View Click to start live view. Click to stop live view. 6.1.2 Select Image Display Mode Click to display the image in 4:3/16:9/original/self-adaptive display mode. 6.1.3 Select Stream Type

Click stream to get the high-quality image when the network condition is good, and select the sub-

stream to get the fluent image when the network condition is not good enough. The third stream is the custom stream. to select the stream type. It is recommended to select the main The supported stream types vary with different models. The actual device prevails. Note 6.1.4 Switch Lens For the dual-lens camera, select to switch the lens. 6.1.5 Capture Picture Manually You can capture pictures manually on the live view image and save them to the computer. Steps 1. Click 2. Click 3. Optional: Click Configuration Local Configuration to view the saving path of snapshots in live to start live view. to capture a picture. view. 6.1.6 Record Manually You can record videos manually on the live view image and save them to the computer. 17 Parking Camera User Manual Steps 1. Click 2. Click 3. Click 4. Optional: Click Configuration Local Configuration to view the saving path of record files. to start live view. to start recording. to stop recording. 6.1.7 Enable Digital Zoom You can enable digital zoom to zoom in a certain part of the live view image. Steps 1. Click 2. Click 3. Place the cursor on the live view image position which needs to be zoomed in. Drag the mouse to start live view. to enable digital zoom. rightwards and downwards to draw an area. The area will be zoomed in. 4. Click any position of the image to restore to normal image. 5. Click to disable digital zoom. 6.2 Local Configuration Go to Configuration Local Configuration to set the live view parameters and change the saving paths of videos, captured pictures, downloaded pictures, etc. Figure 6-1 Local Configuration Protocol Type Select the network transmission protocol according to the actual needs. TCP 18 Parking Camera User Manual Ensures complete delivery of streaming data and better video quality, yet the real-time transmission will be affected. Provides real-time audio and video streams. Live View Performance The video is real-time, but the video fluency may be affected. Balanced mode considers both the real time and fluency of the video. When the network condition is good, the video is fluent. UDP Real-Time Balanced Fluent Rules Record File Size If you enable rules, the colored rectangles will display on the live view image when the motion detection is triggered. Select the packed size of the manually recorded video files. After the selection, the max. record file size is the value you selected. Save record files to Set the saving path for the manually recorded video files. Save snapshots in live view to Set the saving path for the manually captured pictures in live view mode. Save downloaded picture to Set the saving path for the downloaded pictures. Save captured picture to Set the saving path for the captured pictures in Live View Live Traffic Statistics . 19 Parking Camera User Manual Chapter 7 Storage 7.1 Set FTP Set FTP parameters if you want to upload the captured pictures to the FTP server. Before You Start Set the FTP server, and ensure the device can communicate normally with the server. Steps 1. Go to Configuration Device Configuration Encoding and Storage FTP . 2. Optional: Check Upload Additional Information to FTP, and then the related information can Figure 7-1 Set FTP be attached when uploading. 3. Enable the FTP server. 4. Set FTP parameters. 1) Enter Server Address and Port. 2) Enter User Name and Password, and confirm the password. 3) Select Directory Structure. Note to upload. If multiple directories are needed, you can customize the directory name. 5. Optional: Check Not Upload Plate Close-up if the license plate close-up pictures are not needed 6. Set the name rule and separator according to the actual needs. 7. Optional: Edit OSD information which can be uploaded to the FTP server with the pictures to make it convenient to view and distinguish the data. 8. Click Save. 20 Parking Camera User Manual 7.2 Set Cloud Storage Cloud storage is a kind of network storage. It can be used as the extended storage to save the captured pictures. Before You Start Arrange the cloud storage server. You have enabled level 1 arm in Live View Live Traffic Statistics . Steps 1. Go to Configuration Device Configuration Encoding and Storage Cloud Storage . Figure 7-2 Set Cloud Storage 2. Check Enable. 3. Set the server parameters. 1) Enter Server IP Address and Port No.. 2) Enter User Name and Password. 3) Enter the ID according to the storage area No. of the server. 4. Click Save. 7.3 Set Listening Host The listening host can be used to receive the uploaded information and pictures of the device arming alarm. Before You Start The listening service has been enabled for the listening host, and the network communication with the device is normal. Steps 1. Go to Configuration Device Configuration System Configuration TCP/IP . 21 Parking Camera User Manual 2. Set ANPR IP Address/Domain and ANPR Port if you need to upload the alarm information. 3. Set Listening Host IP and Listening Host Port No., and check Enable Uploading Picture while Figure 7-3 Set Listening Host Listening if you need to upload pictures. 4. Click Save. 22 Parking Camera User Manual Chapter 8 Encoding and Display 8.1 Set Video Encoding Parameters Set video encoding parameters to adjust the live view and recording effect. When the network signal is good and the speed is fast, you can set high resolution and bitrate to raise the image quality. When the network signal is bad and the speed is slow, you can set low resolution, bitrate, and frame rate to guarantee the image fluency. When the network signal is bad, but the resolution should be guaranteed, you can set low bitrate and frame rate to guarantee the image fluency. Main stream stands for the best stream performance the device supports. It usually offers the best resolution and frame rate the device can do. But high resolution and frame rate usually means larger storage space and higher bandwidth requirements in transmission. Sub-stream usually offers comparatively low resolution options, which consumes less bandwidth and storage space. Third stream is offered for customized usage. Steps 1. Go to Configuration Device Configuration Encoding and Storage Video Encoding . 2. Set the parameters for different streams. Stream Type Max. Bitrate Frame Rate Resolution SVC Bitrate Type Video stream and video & audio stream are selectable. Select relatively large bitrate if you need good image quality and effect, but more storage spaces will be consumed. Select relatively small bitrate if storage requirement is in priority. It is to describe the frequency at which the video stream is updated and it is measured by frames per second (fps). A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throughout. The higher the resolution is, the clearer the image will be. Meanwhile, the network bandwidth requirement is higher. Scalable Video Coding (SVC) is an extension of the H.264/AVC and H.265 standard. Enable the function and the device will automatically extract frames from the original video when the network bandwidth is insufficient. Select the bitrate type to constant or variable. 23 Parking Camera User Manual Video Quality Encoding Complexity I Frame Interval Video Encoding When bitrate type is variable, 6 levels of video quality are selectable. The higher the video quality is, the higher requirements of the network bandwidth. Under the same bitrate, the higher the encoding complexity is, the higher the image quality is, and the higher the requirement of the network bandwidth is. It refers to the number of frames between two key frames. The larger the I frame interval is, the smaller the stream fluctuation is, but the image quality is not that good. The device supports multiple video encoding types, such as H.264, H.265, and MJPEG. Supported encoding types for different stream types may differ. H.265 is a new encoding technology. Compared with H.264, it reduces the transmission bitrate under the same resolution, frame rate, and image quality. 8.2 Set Image Parameters You can adjust the image parameters to get clear image. 3. Click Save. Steps Note The supported parameters may vary with different models. The actual device prevails. 1. Go to Configuration Device Configuration Image Parameters General Parameters /

Configuration Device Configuration Image Parameters Video . Figure 8-1 Set General Parameters 24 Parking Camera User Manual 2. Adjust the parameters. Figure 8-2 Set Video Image Parameters It refers to the colorfulness of the image color. It refers to the edge contrast of the image. Saturation Sharpness White Balance WDR Mode Time Brightness BLC It is the white rendition function of the device used to adjust the color temperature according to the environment. Wide Dynamic Range (WDR) can be used when there is a high contrast of the bright area and the dark area of the scene. Select WDR Switch and set corresponding parameters according to your needs. On Set WDR Level. The higher the level is, the higher the WDR strength is. Enable WDR according to the time. Set Light Threshold. When the brightness reaches the threshold, WDR will be enabled. If you focus on an object against strong backlight, the object will be too dark to be seen clearly. BLC compensates light to the object in the front to make it clear. Brightness Enhancement at Night The scene brightness will be enhanced at night automatically. Enable Defog 25 Parking Camera User Manual Enable defog to get a clear image in foggy days. Light Compensation on License Plate Check it. The light compensation on license plates can be realized, and various light supplement conditions can be adapted via setting license plate expectant brightness and supplement light correction coefficient. The higher the sensitivity is, the easier this function can be enabled. Enable Gamma Correction The higher the gamma correction value is, the stronger the correction strength is. It refers to the max. brightness of the image. It refers to the contrast of the image. Set it to adjust the levels and permeability of the image. If the shutter speed is quick, the details of the moving objects can be displayed better. If the shutter speed is slow, the outline of the moving objects will be fuzzy and trailing will appear. It refers to the upper limit value of limiting image signal amplification. It is recommended to set a high gain if the illumination is not enough, and set a low gain if the illumination is enough. Digital Noise Reduction (DNR) reduces the noise in the video stream. In Normal Mode, the higher the 3D DNR Level is, the stronger the noise will be reduced. But if it is too high, the image may become fuzzy. In Expert Mode, set Spatial Intensity and Time Intensity. If the special intensity is too high, the outline of the image may become fuzzy and the details may lose. If the time intensity is too high, trailing may appear. The higher the 2D DNR Level is, the stronger the noise will be reduced. But if it is too high, the image may become fuzzy. Brightness Contrast Shutter Speed Gain 3D DNR 2D DNR 8.3 Set ROI ROI (Region of Interest) encoding helps to assign more encoding resources to the region of interest, thus to increase the quality of the ROI whereas the background information is less focused. 26 Parking Camera User Manual Before You Start Please check the video encoding type. ROI is supported when the video encoding type is H.264 or H.265. Steps 1. Go to Configuration Device Configuration Encoding and Storage ROI . 2. Select Stream Type. 3. Set ROI region. Figure 8-3 Set ROI 1) Check Enable. 2) Select Area Code. 3) Click Draw Area. 4) Drag the mouse on the live view image to draw the fixed area. 5) Select the fixed area that needs to be adjusted and drag the mouse to adjust its position. 6) Click Stop Drawing. 4. Enter Area Name and select ROI Level. Note The higher the ROI level is, the clearer the image of the detected area is. 27 Parking Camera User Manual 5. Click Save. 6. Optional: Select other area codes and repeat the steps above if you need to draw multiple fixed areas. 8.4 Set OSD You can customize OSD information on the live view. Steps 1. Go to Configuration Device Configuration Text Overlay Video . Figure 8-4 Set OSD 2. Set OSD property, font size, alignment, etc. 3. Set the display content. 1) Check Camera Name and enter the name. 2) Check Display Date, and set the time and date format. 3) Check Display Week. 4. Optional: Check the display item(s) and enter the information in the text field(s). 5. Drag the red frames on the live view image to adjust the OSD positions. 6. Click Save. Result The set OSD will be displayed in live view image and recorded videos. 28 Parking Camera User Manual Chapter 9 Network Configuration 9.1 Set IP Address IP address must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other. Go to Configuration Device Configuration System Configuration TCP/IP for parameter settings. Figure 9-1 Set IP Address Select a NIC (Network Interface Card) type according to your network condition. NIC Type IPv4 Two IPv4 modes are available. Auto-Obtain The device automatically gets the IPv4 parameters from the network if you check Auto-

Obtain. The device IP address is changed after enabling the function. You can use SADP to get the device IP address. The network that the device is connected to should support auto-obtain. Note Manual 29 Parking Camera User Manual You can set the device IPv4 parameters manually. Enter IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway. IPv6 Three IPv6 modes are available. Route Announcement Note Auto-Obtain Manual MTU DNS The IPv6 address is generated by combining the route announcement and the device Mac address. Route announcement mode requires the support from the router that the device is connected to. The IPv6 address is assigned by the server, router, or gateway. Enter IPv6 Address, IPv6 Subnet Mask, and IPv6 Default Gateway. Consult the network administrator for required information. It stands for maximum transmission unit. It is the size of the largest protocol data unit that can be communicated in a single network layer transaction. The valid value range of MTU is 1280 to 1500. Multicast Address Multicast is group communication where data transmission is addressed to a group of destination devices simultaneously. After setting the IP address of the multicast host, you can send the source data efficiently to multiple receivers. It stands for domain name server. It is required if you need to visit the device with domain name. And it is also required for some applications (e.g., sending email). Set Preferred DNS Server properly if needed. 9.2 Connect to EHome Platform EHome is a platform access protocol. The device can be remotely accessed via EHome platform. Before You Start Create the device ID on EHome platform. Ensure the device can communicate with the platform normally. Steps 1. Go to Configuration Device Configuration System Configuration EHOME . 30 Parking Camera User Manual When the server is in extranet, and the IP address is dynamic, you can select it. Figure 9-2 Connect to EHome Platform When the server IP address is static, you can select it. 4. Enter the parameters below. Enter the static IP address of EHome platform. The default value is 7660. 2. Check Enable Protocol. 3. Select Address Type. Domain Name IP Server IP Server Port Device ID 5. Click Save. 9.3 Set DDNS The ID of the device registered on the EHome platform. If you leave it empty, the device will be logged in to the platform with serial No. You can use the Dynamic DNS (DDNS) for network access. The dynamic IP address of the device can be mapped to a domain name resolution server to realize the network access via domain name. Before You Start Register the domain name on the DDNS server. Set the LAN IP address, subnet mask, gateway, and DNS server parameters. Refer to "Set IP Address" for details. Complete port mapping. The default port is 80, 8000, and 554. Steps 1. Go to Configuration Device Configuration System Configuration DDNS . 31 Parking Camera User Manual Figure 9-3 Set DDNS 2. Check Enable DDNS. 3. Enter the server address and other information. 4. Click Save. 5. Access the device. By Browsers Enter the domain name in the browser address bar to access the device. By Client Software Add domain name to the client software. Refer to the client software manual for specific adding methods. The device port can be modified when the device cannot access the network due to port conflicts. Do not modify the default port parameters at will, otherwise the device may be inaccessible. Go to Configuration Device Configuration System Configuration Port for port settings. It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.168.1.64:81 in the browser for login. Figure 9-4 Set Port 32 9.4 Set Port Caution HTTP Port RTSP Port Parking Camera User Manual It refers to the port of real-time streaming protocol. SDK Port It refers to the port through which the client adds the device. You can enable Bluetooth to upload the parking space information to the platform. 9.5 Set Bluetooth Steps Note Some models do not support Bluetooth. The actual device prevails. 1. Go to Configuration Device Configuration Bluetooth . 2. Check Enable Bluetooth. 3. Set the Bluetooth parameters according to the platform Bluetooth communication standard. Figure 9-5 Set Bluetooth It refers to the frequency of the sent broadcast frames of the Bluetooth module. It refers to the signal strength received within 1 m range of the device. The higher the transmitted power is, the further the receiving distance is. 4. Set Parking Lot ID, Parking Lot Floor Amount, etc. according to the actual parking lot Broadcast Time Interval Rated Power Transmitted Power environment. Note Enter the hex characters (0 to F) according to the corresponding standard of Bluetooth for the parking lot ID. 33 Parking Camera User Manual Chapter 10 Serial Port Configuration 10.1 Set RS-485 Set RS-485 parameters if the device has been connected to a vehicle detector or other RS-485 devices. Before You Start The corresponding device has been connected via the RS-485 serial port. Steps 1. Go to Configuration Device Configuration System Configuration Serial Port Parameters . Figure 10-1 Set RS-485 2. Set Baud Rate, Data Bit, Stop Bit, etc. Note The parameters should be same with those of the connected device. Select it if the vehicle detector has been connected via the RS-485 serial port. Select it, and the network command can be transmitted to RS-485 control command via the RS-485 serial port. 3. Select Work Mode. Application Mode Trigger Transparent Transmission 4. Click Save. 10.2 Set RS-232 Set RS-232 parameters if you need to debug the device via RS-232 serial port, or peripheral devices have been connected. Before You Start The corresponding device has been connected via the RS-232 serial port. Steps 1. Go to Configuration Device Configuration System Configuration Serial Port Parameters . 2. Click Advanced Settings. 34 Parking Camera User Manual 3. Set Baud Rate, Data Bit, Stop Bit, etc. Figure 10-2 Set RS-232 The parameters should be same with those of the connected device. Note 4. Select Working Mode. Console Transparent Channel Narrowband Reserved. 5. Click Save. Select it when you need to debug the device via RS-232 serial port. Select it, and the network command can be transmitted to RS-232 control command via the RS-232 serial port. 35 Parking Camera User Manual Chapter 11 Alarm Configuration This section explains how to set the device to respond to alarm events, including motion detection and exceptions. These events can trigger the linkage methods, such as notifying the surveillance center. 11.1 Set Motion Detection Motion detection detects the moving objects in the set surveillance area, and a series of actions can be taken when the alarm is triggered. Steps 1. Go to Configuration Device Configuration Exception Motion Detection . 2. Check Enable Motion Detection and Enable Dynamic Analysis. 3. Set the motion detection area. 1) Click Draw Area. 2) Drag the mouse on the live view to draw a motion detection area. 3) Click Stop Drawing to complete the current drawing. 4) Optional: Repeat the steps to draw more areas. 5) Optional: Click Clear All to clear all the areas. 6) Adjust Sensitivity of the motion detection. Figure 11-1 Set Motion Detection 4. Set the arming schedule for the motion detection. 1) Click Edit. 2) Select a day to set the arming schedule. 3) Set the start time and end time of the periods. 36 Parking Camera User Manual 4) Optional: If you want to copy the arming schedule to other days, check the day(s) and click Copy. 5) Click OK. Note The time of each period cannot be overlapped. Up to four periods can be set for each day. 5. Check Notify Surveillance Center to send an exception or alarm signal to the surveillance center Figure 11-2 Set Arming Schedule when the motion detection occurs. 6. Click Save. 11.2 Set Exception Alarm Set exception alarm when the network is disconnected or the IP address is conflicted. Steps 1. Go to Configuration Device Configuration Exception Exception . 2. Check the exception type to be alarmed. 3. Click Save. Figure 11-3 Set Exception Alarm 37 Parking Camera User Manual Chapter 12 Safety Management 12.1 Manage User The administrator can add, modify, or delete other accounts, and grant different permissions to different user levels. Steps 1. Go to Configuration Device Configuration User Management . 2. Add a user. 1) Click Add. 2) Enter User Name and select Level. 3) Enter Admin Password, Password, and confirm the password. Caution To increase security of using the device on the network, please change the password of your account regularly. Changing the password every 3 months is recommended. If the device is used in high-risk environment, it is recommended that the password should be changed every month or week. 4) Assign remote permission to users based on needs. Users can be assigned permission of viewing live video and changing their own passwords, but no permission for other operations. Operators can be assigned all permission except for operations on the administrator and creating accounts. User Operator 5) Click OK. Note The administrator can add up to 31 user accounts. 3. You can do the following operations.

- Select a user and click Modify to change the password and permission.

- Select a user and click Delete to delete the user. 12.2 Enable User Lock To raise the data security, you are recommended to lock the current IP address. Steps 1. Go to Configuration Device Configuration System Configuration Service . 2. Check Enable User Lock. 38 Parking Camera User Manual 3. Click Save. Result 12.3 Set SSH 12.4 Set HTTPS When the times you entered incorrect passwords have reached the limit, the current IP address will be locked automatically. To raise network security, disable SSH service. The configuration is only used to debug the device for the professionals. Steps 1. Go to Configuration Device Configuration System Configuration Port . 2. Uncheck SSH Port. 3. Click Save. 12.4.1 Create and Install Self-signed Certificate HTTPS is a network protocol that enables encrypted transmission and identity authentication, which improves the security of remote access. Steps 1. Go to Configuration Network Advanced Settings HTTPS . 2. Select Create Self-signed Certificate. 3. Click Create. 4. Follow the prompt to enter Country, Hostname/IP, Validity, and other parameters. 5. Click OK. Result The device will install the self-signed certificate by default. 12.4.2 Install Authorized Certificate If the demand for external access security is high, you can create and install authorized certificate via HTTPS protocol to ensure the data transmission security. Steps 1. Go to Configuration Device Configuration System Configuration HTTPS . 2. Select Create certificate request first and continue the installation. 3. Click Create. 39 Parking Camera User Manual 4. Follow the prompt to enter Country, Hostname/IP, Validity, and other parameters. 5. Click Download to download the certificate request and submit it to the trusted authority for signature. 6. Import certificate to the device.

- Select Signed certificate is available, start the installation directly. Click Browse and Install to import the certificate to the device.

- Select Create the certificate request first and continue the installation. Click Browse and Install to import the certificate to the device. 7. Click Save. 40 Parking Camera User Manual Chapter 13 Maintenance 13.1 View Device Information Basic Information and Algorithms Library Version Go to Configuration Device Configuration System Configuration Device Information to view the basic information and algorithms library version of the device. You can edit Device Name and Device No. The device No. is used to control the device. It is recommended to reserve the default value. Device Status Go to Configuration Device Status to view the status of the current device and vehicle detector. Upgrade the system when you need to update the device version. 13.2 Upgrade Before You Start Prepare the upgrade file. Steps 1. Go to Configuration Device Configuration System Maintenance Upgrade . 2. Click Browse to select the upgrade file. 3. Click Upgrade. 4. Click OK in the popup window. The upgrade process will take 1 to 10 minutes. Do not cut off the power supply. Note Result 13.3 Reboot The device will reboot automatically after upgrade. When the device needs to be rebooted, reboot it via the software instead of cutting off the power directly. Steps 1. Go to Configuration Device Configuration System Maintenance Reboot . 2. Click Reboot. 3. Click OK to reboot the device. 41 Parking Camera User Manual 13.4 Restore Parameters When the device is abnormal caused by the incorrect set parameters, you can restore the parameters. Steps 1. Go to Configuration Device Configuration System Maintenance Default . 2. Select the restoration mode.

- Click Restore to restore the parameters except the IP address, subnet mask, gateway, and port No. to the default settings.

- Click Restore Factory Settings to restore all the parameters to the factory settings. 3. Click OK. 13.5 Synchronize Time Synchronize the device time when it is inconsistent with the actual time. Steps 1. Go to Configuration Device Configuration System Configuration Time Settings . 2. Select Time Zone. 3. Select Synchronization Mode. NTP Synchronization Select it to synchronize the device time with that of the NTP server. Set Server Address, NTP Port, and Interval. Click NTP Test to test if the connection between the device and the server is normal. Manual Synchronization Select it to synchronize the device time with that of the computer. Set time manually, or check Sync. with computer time. The time synchronization modes vary with different models. The actual device prevails. Note 4. Click Save. 13.6 Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this function. Steps 1. Go to Configuration Device Configuration System Configuration DST . 2. Check Enable DST. 42 Parking Camera User Manual 3. Set Start Time, End Time, and DST Bias. 4. Click Save. 13.7 Export Parameters You can export the parameters of one device, and import them to another device to set the two devices with the same parameters. Steps 1. Go to Configuration Device Configuration System Maintenance Export Configuration The password is used for importing the configuration file of the current device to other devices. File . 2. Click Export. 3. Set a password, and click OK. Note 4. Select the saving path, and enter the file name. 5. Click Save. 13.8 Import Configuration File Before You Start Save the configuration file to the computer. Steps Caution File . 2. Select Importing Method. Note Importing configuration file is only available to the devices of the same model and same version. 1. Go to Configuration Device Configuration System Maintenance Import Configuration If you select Import Part, check the parameters to be imported. 3. Click Browse to select the configuration file. 4. Enter the password which is set when the configuration file is exported, and click OK. 5. Click Import. 6. Click OK on the popup window. 43 Import the configuration file of another device to the current device to set the same parameters. Parking Camera User Manual Result The parameters will be imported, and the device will reboot. 13.9 Export Debug File The technicians can export the debug file to troubleshoot and maintain the device. Steps 1. Go to Configuration Device Configuration System Maintenance Export Debug File . 2. Click Export Debug. 3. Select the saving path, and enter the file name. 4. Click Save. 44 UD20012B

HIKVISION Parking Camera Model: Ds-TCcP440-DB VP: 12V-24V ===

SN: AB1234567 KZXXXXXXXXXXXXX 01/2020 Made in China FCCID: 2apTp-Tcp440-DB FCC Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may cause undesired operation.

a) b) c) d) e) f) g) Title:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Xiuying Zhang 2ADTD 2ADTD-TCP440-DB zhangxiuying@hikvision.com

+86-571-88075998 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2020/8/12 Applicant Signature:

Print Name:

Xiuying Zhang Senior Certification engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2020-08-12 Regarding: FCC ID: 2ADTD-TCP440-DB To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460

Confidentiality Request regarding application for FCC ID: 2ADTD-TCP440-DB No. 555 Qianmo Road, Binjiang District, angzhou 310052, China SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hangzhou Hikvision Digital Technology Co., Ltd. To:

From: Hangzhou Hikvision Digital Technology Co., Ltd. Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.