FCC ID: 2ADTD-K3B501SRE Swing Barrier

DS-K3B501S Series Swing Barrier Quick Start Guide DS-K3B501S Series Swing Barrier Quick Start Guide Legal Information 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website ( https://

www.hikvision.com/ ). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. Trademarks Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. and other Hikvision's trademarks and logos are the properties of Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED AS IS AND WITH ALL FAULTS AND ERRORS. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR i DS-K3B501S Series Swing Barrier Quick Start Guide PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image. As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as, implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the effectiveness of your security controls. ii DS-K3B501S Series Swing Barrier Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed iii DS-K3B501S Series Swing Barrier Quick Start Guide under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:

www.recyclethis.info 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info iv DS-K3B501S Series Swing Barrier Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions:

Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage. Dangers: Follow these safeguards to prevent serious injury or death. Cautions: Follow these precautions to prevent potential injury or material damage. Danger:

or fire hazard. All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption cannot be less than the required value. Do not connect several devices to one power adapter as adapter overload may cause over-heat Please make sure that the power has been disconnected before you wire, install or dismantle the device. If the top caps should be open and the device should be powered on for maintenance, make sure:

1. Power off the fan to prevent the operator from getting injured accidentally. 2. Do not touch bare high-voltage components. 3. Make sure the switchs wiring sequence is correct after maintenance. Please make sure that the power has been disconnected before you wire, install or dismantle the device. When the product is installed on wall or ceiling, the device shall be firmly fixed. If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. Do not ingest battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the device yourself. (We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.) v DS-K3B501S Series Swing Barrier Quick Start Guide Cautions:

Stainless steel may be corroded in some circumstances. You need to clean and care the device by using the stainless steel cleaner. It is suggested to clean the device every month. Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. The device cover for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of the fingers may erode the surface coating of the device cover. Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents. Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Do not stay in the lane when the device is rebooting. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY. The instructions shall require connection of the equipment protective earthing conductor to the installation protective earthing conductor. vi DS-K3B501S Series Swing Barrier Quick Start Guide Available Models Product Name Model Description Swing Barrier DS-K3B501S-L DS-K3B501S-M DS-K3B501S-R Left Pedestal Middle Pedestal Right Pedestal Scan the QR code to get User Manual of Swing Barrier. Note that mobile data charges may apply if Wi-Fi is unavailable. vii DS-K3B501S Series Swing Barrier Quick Start Guide Contents Chapter 1 Overview .................................................................................................................... 1 1.1 Introduction ........................................................................................................................... 1 1.2 Main Features ........................................................................................................................ 1 Chapter 2 Wiring ........................................................................................................................ 3 2.1 Components Introduction ...................................................................................................... 3 2.2 Wiring Electric Supply ............................................................................................................ 4 2.3 Wire Interconnecting Cable ................................................................................................... 5 2.3.1 General Wiring .............................................................................................................. 5 2.3.2 Wire Face Recognition Terminal .................................................................................... 6 2.4 Terminal Description .............................................................................................................. 7 2.4.1 Master Control Board Terminal Description ................................................................. 7 2.4.2 Slave Control Board Terminal Description ..................................................................... 8 2.4.3 Main Control Board Terminal Description ..................................................................... 9 2.4.4 Main Control Board Serial Port ID Description ............................................................ 11 2.4.5 RS-485 Wiring ............................................................................................................. 14 2.4.6 RS-232 Wiring ............................................................................................................. 15 2.4.7 Wiegand Wiring .......................................................................................................... 16 2.4.8 Barrier Control Wiring ................................................................................................. 16 2.4.9 Alarm Output Wiring ................................................................................................... 18 2.4.10 Fire Alarm Module Wiring ......................................................................................... 18 Chapter 3 Installation ............................................................................................................... 20 3.1 Disassemble Pedestals ......................................................................................................... 20 3.2 Install Pedestals ................................................................................................................... 20 Chapter 4 Device Settings ......................................................................................................... 23 4.1 Set Closed Position ............................................................................................................... 23 4.2 Pair Keyfob (Optional) .......................................................................................................... 24 viii DS-K3B501S Series Swing Barrier Quick Start Guide 4.3 Initialize Device .................................................................................................................... 24 4.4 Switch to RS-485/RS-232 Mode ........................................................................................... 25 4.5 Switch Relay Output Mode (NO/NC) .................................................................................... 26 4.5.1 Barrier Control Relay Output Mode ............................................................................ 26 4.5.2 Alarm Relay Output Mode (NO/NC) ............................................................................ 27 Chapter 5 Activation ................................................................................................................. 28 5.1 Activate via SADP ................................................................................................................. 28 5.2 Activate Device via Client Software ...................................................................................... 29 Appendix A. Tips for Scanning Fingerprint ................................................................................ 31 Appendix B. DIP Switch ............................................................................................................ 33 B.1 DIP Switch Description ......................................................................................................... 33 B.2 DIP Switch Corresponded Functions .................................................................................... 33 Appendix C. Event and Alarm Type ........................................................................................... 35 Appendix D. Table of Audio Index Related Content ................................................................... 36 Appendix E. Error Code Description .......................................................................................... 37 Appendix F. Communication Matrix and Device Command ....................................................... 39 ix DS-K3B501S Series Swing Barrier Quick Start Guide Chapter 1 Overview 1.1 Introduction The swing barrier with two barriers and 12 IR lights is designed to detect unauthorized entrance or exit. By adopting the swing barrier integratedly with the access control system, person should authenticate to pass through the lane via swiping IC or ID card, scanning QR code, etc. It is widely used in attractions, stadiums, construction sites, residences, etc. 1.2 Main Features 32-bit high-speed processor TCP/IP network communication Permissions validation and anti-tailgating Remaining open/closed mode selectable Bidirectional (Entering/Exiting) lane The communication data is specially encrypted to relieve the concern of privacy leak The barrier opening and closing speed can be configured according to the visitor flow The barrier will be stop working when people are nipped Anti-forced-accessing The barrier will be locked automatically without open-barrier signal. Self-detection, Self-diagnostics, and automatic alarm Audible and visual alarm will be triggered when detecting intrusion, tailgating, reverse passing, and climbing over barrier Remote control and management Online/offline operation LED indicates the entrance/exit and passing status 1 DS-K3B501S Series Swing Barrier Quick Start Guide Barrier remains open when powered down Fire alarm passing When the fire alarm is triggered, the barrier will be open automatically for emergency evacuation Valid passing duration settings System will cancel the passing permission if a person does not pass through the lane within the valid passing duration Opens/Closes barrier according to the schedule template Up to 3000 visitor cards and up to 60,000 cards except for visitor cards can be added 2 DS-K3B501S Series Swing Barrier Quick Start Guide Chapter 2 Wiring 2.1 Components Introduction By default, basic components of the turnstile are connected well. The pedestals can communicate by wiring the interconnecting cables. And the turnstile supports wiring the AC electric supply for the whole system's power supply. Note The voltage luctuation of the electric supply is between 100 VAC ~ 240 VAC, 50 / 60 Hz. The picture displayed below describes each component's position on the turnstile. Figure 2-1 Components Diagram 1 The picture displayed below describes the IR adapter and the IR sending/receiving board and their corresponding number on the pedestal. 3 DS-K3B501S Series Swing Barrier Quick Start Guide Figure 2-2 Components 2 Note If the turnstile contains two lanes, standing at the entrance position, the IR boards on the left pedestal are the IR sending boards. The IR boards on the right pedestal are the IR receiving boards. The IR boards on the left side of the middle pedestal are the IR receiving boards, while the IR boards on the right side of the middle pedestal are the IR sending boards. 2.2 Wiring Electric Supply Wire electric supply with the switch in the pedestal. Terminal L and terminal N are on the switch, while terminal PE should connect to a ground wire (yellow and green wire). 4 DS-K3B501S Series Swing Barrier Quick Start Guide Note The cable bare part should be no more than 8 mm. It is suggested that you can immerse the bare part into the liquid tin. If possible, wear an insulation cap at the end of the bare cable. Make sure theres no bare copper or cable after the wiring. The Terminal L and the Terminal N cannot be wired reversely. Do not wire the input and output terminal reversely. To avoid people injury and device damage, when testing, the ground resistance of the equipotential points should not be larger than 2 2.3 Wire Interconnecting Cable You should use interconnecting cables to connect the master lane board and the slave lane board for components communication. The picture displayed below describes the cable hole's position on the pedestals. Figure 2-3 Cable Hole of Interconnecting Cable 2.3.1 General Wiring The picture displayed below describes the interconnecting cable's wiring diagram. 5 DS-K3B501S Series Swing Barrier Quick Start Guide Figure 2-4 Wire General Device Note The supplied interconnecting cable length is 3.75 m. If you need a longer one, ask our technique supports or sales and purchase for 5.5 m interconnecting cables. The suggested inner diameter of the low voltage conduit is larger than 30 mm. If you want to bury both of the AC power cord and the low voltage cable at the entrance, the two cables should be in separated conduits to avoid interference. If more peripherals are required to connect, you should increase the conduit diameter or bury another conduit for the external cables. The external AC power cord should be double-insulated. The suggested network cable should be CAT5e or the network cable has better performance. And the suggested network cable length should be less than 100 m. 2.3.2 Wire Face Recognition Terminal The picture displayed below describes the interconnecting cable's wiring diagram. 6 DS-K3B501S Series Swing Barrier Quick Start Guide Figure 2-5 Face Recognition Terminal Wiring Note The supplied interconnecting cable length is 3.75 m. If you need a longer one, ask our technique supports or sales and purchase 5.5 m interconnecting cables. The suggested inner diameter of the low voltage conduit is larger than 30 mm. If you want to bury both of the AC power cord and the low voltage cable at the entrance side, the two cables should be in separated conduits to avoid interference. If more peripherals are required to connect, you should increase the conduit diameter or bury another conduit for the external cable. The external AC power cord should be double-insulated. The suggested network cable should be CAT5e or the network cable has better performance. And the suggested network cable length should be less than 100 m. 2.4 Terminal Description The lane controller contains master lane controller and slave lane controller, which controls the IR beams, motor, and other components' work. 2.4.1 Master Control Board Terminal Description The master lane control board contains interconnecting interfaces, BUS, motor encoder interface, debugging port, door closed position interface, seven-segment display, strip light interface

(reserved), supercapacitor, power interface, motor drive interface, and DIP switch. The picture displayed below is the master control board diagram. 7 DS-K3B501S Series Swing Barrier Quick Start Guide 2.4.2 Slave Control Board Terminal Description The slave lane control board contains interconnecting interfaces, BUS, motor encoder interface, debugging port, door closed position interface, seven-segment display, strip light interface

(reserved), supercapacitor, power interface, and motor drive interface. The picture displayed below is the slave control board diagram. 8 DS-K3B501S Series Swing Barrier Quick Start Guide 2.4.3 Main Control Board Terminal Description Table 2-1 Main Control Board Terminal Description Main Controllingn Board Terminal Description Power Output 1

+12 V Power Output Grounding Wiegand Card Reader 1 GND OK ERR BZ W1 W0 GND OK ERR BZ W1 W0 GND Wiegand Card Reader 2 Indicator of Card Reader Control Output (Invalid Card Output) Indicator of Card Reader Control Output (Valid Card Output) Card Reader Buzzer Control Output Wiegand Head Read Data Input Data1 Wiegand Head Read Data Input Data0 Grounding Indicator of Card Reader Control Output (Invalid Card Output) Indicator of Card Reader Control Output (Valid Card Output) Card Reader Buzzer Control Output Wiegand Head Read Data Input Data1 Wiegand Head Read Data Input Data0 Grounding 9 DS-K3B501S Series Swing Barrier Quick Start Guide Main Controllingn Board Terminal Description RS-485 Interface GND Grounding Power Output 2 RS-232 Interface Power Input Event Input Exit Button RS-485 B-

RS-485 B+

GND RS-485 C-

RS-485 C+

5 V GND GND RS-232 G-

RS-232 G+

GND RS-232 H-

RS-232 H+

+12 V GND C1 GND C2 C3 C4 B2 GND GND B1 D1-

D1+

D2-

D2+

Connect to Card Reader RS485-

Connect to Card Reader RS485+

Grounding Connect to Card Reader RS485-

Connect to Card Reader RS485+

5 VDC Power Output 5 VDC Grounding Grounding Connect to Card Reader RS232-

Connect to Card Reader RS232+

Grounding Connect to Card Reader RS232-

Connect to Card Reader RS232+

12 VDC Power Input 12 VDC Grounding Event Alarm Input 1 Grounding Event Alarm Input 2 Event Alarm Input 3 Grounding Event Alarm Input 4 Door 2 Signal Input Grounding Door 1 Signal Input Door 2 Relay Output (Dry Contact) 10 Door Lock (Relay) Door 1 Relay Output (Dry Contact) DS-K3B501S Series Swing Barrier Quick Start Guide Main Controllingn Board Terminal Description Alarm Output Alarm Output Relay 1 (Dry Contact) NO/NC1 COM1 NO/NC2 COM2 NO/NC3 COM3 NO/NC4 COM4 Alarm Output Relay 2 (Dry Contact) Alarm Output Relay 3 (Dry Contact) Alarm Output Relay 4 (Dry Contact) Network Interface LAN Network Accessing Note The alarm input hardware interface is normally open by default. So only the normally open signal is allowed. It can be linked to the buzzer of the card reader and access controller, and the alarm relay output and open door relay output. The DIP of RS485 card ID is set as 1 and4 by default. 1 is for entering, and 4 is for exiting. Set the DIP as 3 for connecting visitor card reader. The Wiegand card reader 1 and 2 respectively refer to the entering and exiting card reader. The alarm output supports relay output. For any requirements, the door lock can control the door barrier status of the third party. D1 controls the barrier opening for entrance, while D2 controls the door opening for exit. For details, see Barrier Control Relay Output Mode . C3 and C4 in the event input can also be people counting interface. C3 controls people counting for entrance, while C4 controls people counting for exit. When the main control board detects signals in C3 and C4, the people number will be accumulated. For detailed information about people counting and people number, see Configuring People Counting Parameters in User Manual of iVMS-4200 AC Client Software. For detailed information about the DIP switch, see DIP Switch Description. 2.4.4 Main Control Board Serial Port ID Description You can use the jumper cap on the main control board to switch the interface communication mode. For details about switching between RS-232 and RS-485 communication type, see Switching RS-485/RS-232 Mode. 11 DS-K3B501S Series Swing Barrier Quick Start Guide Figure 2-6 Main Control Board According to the picture above, the RS-485 serial port corresponds to UART2 and UART3. RS-232 serial port is corresponded to UART7 and UART8. Wiring Interface is corresponded to UART1, UART4, UART6, UART6, and Lane. The main control board descriptions are as follows:

UART2/UART3 Jumper Cap Reserved serial port. Use the jumper cap to switch the serial port communication mode. You can switch between the RS-485 communication mode and the RS-232 communication mode. By default, it is in RS-485 communication mode. UART6 Jumper Cap UART5 Jumper Cap UART1 Jumper Cap Lane Use the jumper cap to switch the serial port communication mode with the slave lane controller. You can switch between the RS-232 communication mode and the RS-485 communication mode. By default, it is in RS-232 communication mode. Use the jumper cap to switch the serial port communication mode with the slave lane controller. You can switch between the RS-484 communication mode and the RS-232 communication mode. By default, it is in RS-485 communication mode. Use the jumper cap to switch the serial port communication mode with the master lane controller. You can switch between the RS-484 communication mode and the RS-232 communication mode. By default, it is in RS-485 communication mode. Use the jumper cap to switch the serial port communication mode with the lane controller. By default, the interface is wired and it is in RS-485 communication mode. If wiring other controllers (compatible with Hikvision communication protocol), use the jumper cap to switch between RS-485 and RS-232 communication mode. 12 DS-K3B501S Series Swing Barrier Quick Start Guide UART4 UART7/UART8 The serial port is in the wiring interface according to the picture above, which has a fixed RS-232 communication mode to communicate with the master lane controller. It contains no jumper cap and cannot change the communication mode. Reserved serial port. The serial port has a fixed RS-232 communication mode. It contains no jumper cap and cannot change the communication mode. It can connect QR code scanner, card recycler, and text screen. The reserved interface positions in the turnstile and their corresponded UART No. are as follows:

Figure 2-7 Interface and Corresponded UART No. 13 DS-K3B501S Series Swing Barrier Quick Start Guide 2.4.5 RS-485 Wiring Note There are four RS-485 interfaces, which are for connecting ID card reader, IC card reader, QR code scanner, fingerprint and card reader, card recycler, text screen, fingerprint reader, and face recognition terminal. Take the wiring of RS-485 card reader as an example. For details about text screen, see Configuring Screen Parameters in User Manual of iVMS-4200 AC Client Software. 14 DS-K3B501S Series Swing Barrier Quick Start Guide 2.4.6 RS-232 Wiring Note There are three RS-232 interfaces (UART4, UART7, and UART8). UART7 and UART8 can connect QR code scanner, card recycler, and text screen, while UART4 can connect QR code scanner, card recycler, text screen, and face recognition terminal. For details about text screen, see Configuring Screen Parameters in User Manual of iVMS-4200 AC Client Software. Take the wiring of text screen as an example. 15 DS-K3B501S Series Swing Barrier Quick Start Guide 2.4.7 Wiegand Wiring Note Note Connect the OK/ERR/BZ if the access controller should control the LED and buzzer of the Wiegand card reader. 2.4.8 Barrier Control Wiring By default, the barrier has connected with the main control board. The lane control board can control the barrier status. If possible, the device can connect with a third party lane control board to control the third party barriers. Interface D1 controls barrier opening for entrance, while interface D2 controls barrier opening for exit. Use the jumper cap to switch the relay status. For details, see Barrier Control Relay Output Mode . 16 DS-K3B501S Series Swing Barrier Quick Start Guide Entering Wiring Exiting Wiring 17 DS-K3B501S Series Swing Barrier Quick Start Guide 2.4.9 Alarm Output Wiring Note For details about changing the relay output status via the jumper cap, see Alarm Relay Output Mode (NO/NC) . 2.4.10 Fire Alarm Module Wiring You can view the fire alarm module wiring diagram. 18 DS-K3B501S Series Swing Barrier Quick Start Guide Figure 2-8 Fire Alarm Module Wiring 19 DS-K3B501S Series Swing Barrier Quick Start Guide Chapter 3 Installation 3.1 Disassemble Pedestals Before installation, you should use the key to open the pedestals. View the pictures below to find the lock holes. Figure 3-1 Lock Holes Before You Start Prepare for the installation tools, check the device and the accessories, and clear the installation base. 3.2 Install Pedestals Steps Note The device should be installed on the concrete surface or other non-flammable surfaces. The dimension of two-lane turnstile with barrier width of 650 mm is as follows. 20 DS-K3B501S Series Swing Barrier Quick Start Guide Figure 3-2 Dimension 1. Prepare for the installation tools, check the components, and prepare for the installation base. 2. Draw a central line on the installation surface of the left or right pedestal. 3. Draw other parallel lines for installing the other pedestals. Note Note Note The distance between the nearest two line is L+200 mm. L represents the lane width. 4. Drill holes on the ground according to the installation holes on the pedestals and insert the expansion sleeves. 5. Bury interconnecting cables for pedestal communication. For detailed information about burying and wiring interconnecting cables, see Wire Interconnecting Cable . 6. According to the entrance and exit marks on the pedestals, move the pedestals to the corresponded positions. Make sure the installation holes on the pedestals and the base are aligned with each other. 21 DS-K3B501S Series Swing Barrier Quick Start Guide 7. Secure the pedestals with expansion bolts. Note should be no more than 150 mm. The installation footprint is as follows:

Do not immerse the pedestal in the water. In special circumstances, the immersed height Figure 3-3 Installation Footprint 22 DS-K3B501S Series Swing Barrier Quick Start Guide Chapter 4 Device Settings After installation and wiring completed, you should set the barriers closed position (study mode) before entering the working mode. You can also set the test mode, normal mode, passing mode and memory mode, pair the keyfob, initialize the hardware, switching between RS-485 communication mode and RS-232 communication mode, and view relay output NO/NC diagram by setting the DIP switch on the main control board. Study Mode: The barrier will learn the closed position. Normal Mode: The device will work properly. Test Mode: Test mode is the same as the normal mode except that the device cannot report the alarm, the event, or the people counting information to the center. Passing Mode: There are 9 passing modes, including controlled bi-direction, controlled entrance and prohibited exit, controlled entrance and free exit, free bi-direction, free entrance and controlled exit, free entrance and prohibited exit, prohibited bi-direction, prohibited entrance and free exit. Memory Mode: By default, the memory mode is enabled. When multiple cards are presented and authenticated, it allows multiple persons passing through the lane. When it counts the passing people number is equal to the card presented times, or no person passing through the lane after the last person passing, the barriers will be closed. Note You can also set the DIP switch on the main control board to control the entrance and exit controlling type, keyfob pairing, etc. For details about the DIP switch value, see DIP Switch . 4.1 Set Closed Position Enter the study mode through DIP switching to set the closed position of the device barrier. Steps 1. Set The No.1 and No.2 switches of the 8-digit DIP Switch on the main control board by referring the following figure to enter the study mode. 2. Adjust the closed position of the barrier. 3. Power on the device. The device will remember the current position (closed position) automatically. 4. Power off the device. 5. Set the No.1 and No.2 switches of the 8-digit DIP Switch on the main control board by referring to the following figure. 23 DS-K3B501S Series Swing Barrier Quick Start Guide 6. Power on the device again. Note For details about the DIP switch value and meaning, see DIP Switch Description. The barrier will open automatically and turns back to the closed position. At this circumstance, the device enters the normal mode. 4.2 Pair Keyfob (Optional) Pair the remote control to the device through DIP switch to open/close the barrier remotely. Before You Start Ask our technique supports or sales and purchase the keyfob. Steps 1. Power off the turnstile. 2. Set the No.4 switch of the 8-digit DIP Switch on the main control board according to the figure below. 3. Power on the turnstile and it will enter the keyfob pairing mode. 4. Hold the Close button for more than 10 seconds. The keyfob's indicator of the will flash twice if the pairing is completed. 5. Set the DIP switch as OFF, and reboot the turnstile to take effect. Note You can also pair the keyfob via the client software. For details, see Managing Keyfob in User Manual of iVMS-4200 AC Client Software. Only one turnstile can pair the keyfob. If multiple turnstiles are in the pairing mode, the keyfob will select only one of them to pair. For details about DIP switch value and meaning, see DIP Switch . 4.3 Initialize Device Steps 1. Remove the jumper cap of initialization pin on the main control board. 24 DS-K3B501S Series Swing Barrier Quick Start Guide Figure 4-1 Initialization Jumper Cap 2. Disconnect the power and reboot the device. The device buzzer buzzes a long beep. 3. When the beep stopped, plug the jumper cap back. 4. Disconnect the power and power on the device again. Caution Note The initialization of the device will restore all the parameters to the default setting and all the device events are deleted. Make sure no persons are in the lane when powering on the device. 4.4 Switch to RS-485/RS-232 Mode Take the Serial Port 4 and on the main control board as an example. If the Jumper cap's position is like the picture displayed below. (The black part is the jumper cap.) The serial port is in RS-485 communication mode. Figure 4-2 Jumper Cap Status of RS-485 Interface If the Jumper cap's position is like the picture displayed below. (The black part is the jumper cap.) The serial port is in RS-232 communication mode. 25 DS-K3B501S Series Swing Barrier Quick Start Guide Figure 4-3 Jumper Cap Status of RS-232 Interface 4.5 Switch Relay Output Mode (NO/NC) 4.5.1 Barrier Control Relay Output Mode The pins of the barrier control relay on the main control board is as below:

The jumper cap's position of barrier opening for entrance (NO) is as below:

Figure 4-4 Pin Appearance The jumper cap's position of barrier opening for exit (NO) is as below:

The jumper cap's position of barrier closing for entrance (NC) is as below:

The jumper cap's position of barrier closing for exit (NC) is as below:

26 DS-K3B501S Series Swing Barrier Quick Start Guide 4.5.2 Alarm Relay Output Mode (NO/NC) Alarm Relay Output Mode (NO):

Alarm Relay Output Mode (NC):

27 DS-K3B501S Series Swing Barrier Quick Start Guide Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported. The default values of the device are as follows:

The default IP address: 192.0.0.64 The default port No.: 8000 The default user name: admin 5.1 Activate via SADP SADP is a tool to detect, activate and modify the IP address of the device over the LAN. Before You Start Get the SADP software from the supplied disk or the official website http://

www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet. The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details. Steps 1. Run the SADP software and search the online devices. 2. Find and select your device in online device list. 3. Input new password (admin password) and confirm the password. Caution STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 4. Click Activate to start activation. 28 DS-K3B501S Series Swing Barrier Quick Start Guide Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP. 3) Input the admin password and click Modify to activate your IP address modification. 5.2 Activate Device via Client Software For some devices, you are required to create the password to activate them before they can be added to the software and work properly. Steps Note This function should be supported by the device. on the right of Device Management and select Device. 1. Enter the Device Management page. 2. Click 3. Click Online Device to show the online device area. The searched online devices are displayed in the list. 4. Check the device status (shown on Security Level column) and select an inactive device. 5. Click Activate to open the Activation dialog. 6. Create a password in the password field, and confirm the password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least 29 DS-K3B501S Series Swing Barrier Quick Start Guide three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. 7. Click OK to activate the device. 30 DS-K3B501S Series Swing Barrier Quick Start Guide Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger:

You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center. Incorrect Scanning The figures of scanning fingerprint displayed below are incorrect:

Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again. 31 DS-K3B501S Series Swing Barrier Quick Start Guide Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another finger and try again. 32 DS-K3B501S Series Swing Barrier Quick Start Guide Appendix B. DIP Switch B.1 DIP Switch Description The DIP switch is on the master lane control board. No.1 to No 8 is from the low bit to the high bit. When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off. If you set the DIP switch like the figure displayed below, its binary value is 00001100, and its decimal value is 12. B.2 DIP Switch Corresponded Functions The 8-bit DIP switch corresponded functions on the main controller are as follows:

Bit Device Mode Function Decimal Value Binary Value 1 to 2 Work Mode Normal Mode 3 4 Memory Mode Keyfob Paring Mode 5 to 8 Passing Mode 00 01 10 1 0 0 1 0000 0001 0 1 2 1 0 0 1 0 1 Study Mode Test Mode Enable Memory Mode Disable Memory Mode Enable Keyfob Paring Mode Disable Keyfob Paring Mode Controlled Bi-

direction Controlled Entrance and Prohibit Exit 33 DS-K3B501S Series Swing Barrier Quick Start Guide Bit Device Mode Function Decimal Value Binary Value Controlled Entrance and Free Exit Free Bi-direction Free Entrance and Controlled Exit Free Entrance and Prohibit Exit Prohibited Bi-

direction Prohibit Entrance and Controlled Exit Prohibit Entrance and Free Exit 2 3 4 5 6 7 8 0010 0011 0100 0101 0110 0111 1000 34 DS-K3B501S Series Swing Barrier Quick Start Guide Appendix C. Event and Alarm Type Event Alarm Type Tailgating Visual and Audible Reverse Passing Visual and Audible Force Accessing None Climb over Barrier Visual and Audible Overstay Visual and Audible Passing Timeout None Intrusion Visual and Audible Free Passing Authentication Failed Visual Barrier Obstructed None 35 DS-K3B501S Series Swing Barrier Quick Start Guide Appendix D. Table of Audio Index Related Content Index Content Authenticated. Card No. does not exist. Card No. and fingerprint mismatch. Climbing over the barrier. Reverse passing. Passing timeout. Intrusion. Force accessing. Tailgating. No permissions. Authentication time out. Authentication failed. Expired card. 1 2 3 4 5 6 7 8 9 10 11 12 13 36 DS-K3B501S Series Swing Barrier Quick Start Guide Appendix E. Error Code Description The swing barrier will display the error code on the seven-segment display if error occurred. Refer to the table below to find the description of each number. Error Reason Code Error Reason Code Normal Working The First IR Beam on Upper IR Board Triggered The Second IR Beam on Upper IR Board Triggered The Third IR Beam on Upper IR Board Triggered The Fourth IR Beam on Upper IR Board Triggered The Fifth IR Beam on Upper IR Board Triggered The Sixth IR Beam on Upper IR Board Triggered The Seventh IR Beam on Upper IR Board Triggered The Eighth IR Beam on Upper IR Board Triggered The Ninth IR Beam on Upper IR Board Triggered The Tenth IR Beam on Upper IR Board Triggered The Eleventh IR Beam on Upper IR Board Triggered The Twelfth IR Beam on Upper IR Board Triggered The First IR Beam on Lower IR Board Triggered The Second IR Beam on Lower IR Board Triggered 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 Upper IR Board 5 Offline Upper IR Board 6 Offline Upper IR Board 7 Offline Upper IR Board 8 Offline Upper IR Board 9 Offline Upper IR Board 10 Offline Upper IR Board 11 Offline Upper IR Board 12 Offline Lower IR Board 1 Offline Lower IR Board 2 Offline Lower IR Board 3 Offline Lower IR Board 4 Offline Lower IR Board 5 Offline Lower IR Board 6 Offline Lower IR Board 7 Offline 37 DS-K3B501S Series Swing Barrier Quick Start Guide Error Reason Code Error Reason Code The Third IR Beam on Lower IR Board Triggered The Fourth IR Beam on Lower IR Board Triggered The Fifth IR Beam on Lower IR Board Triggered The Sixth IR Beam on Lower IR Board Triggered The Seventh IR Beam on Lower IR Board Triggered The Eighth IR Beam on Lower IR Board Triggered The Ninth IR Beam on Lower IR Board Triggered The Tenth IR Beam on Lower IR Board Triggered The Eleventh IR Beam on Lower IR Board Triggered The Twelfth IR Beam on Lower IR Board Triggered Upper IR Board 1 Offline Upper IR Board 2 Offline Upper IR Board 3 Offline Upper IR Board 4 Offline 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Light Board Offline (Entrance) 49 Lower IR Board 8 Offline Lower IR Board 9 Offline Lower IR Board 10 Offline Lower IR Board 11 Offline Lower IR Board 12 Offline Light Board Offline (Exit) IR Adapter Offline (Up) IR Adapter Offline (Low) CAN Bus Exception Not Studying Obstruction Exceeding Studying Range Motor Exception 44 45 46 47 48 50 51 52 53 54 55 56 57 38 DS-K3B501S Series Swing Barrier Quick Start Guide Appendix F. Communication Matrix and Device Command Communication Matrix Scan the following QR code to get the device communication matrix. Note that the matrix contains all communication ports of Hikvision access control and video intercom devices. Figure F-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. 39 DS-K3B501S Series Swing Barrier Quick Start Guide Figure F-2 Device Command 40 UD18740B

-HIKVISION Swing Barrier Model: DS-K3B501S-R/E SN: 400345678 Date: 04/2020 i 100-240V~,50/60Hz, 1.44-0.6A Made in China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1}this device may not cause harmful interference, and

(this device must accept any interference received, including interference that may cause undesired operation. Manufacturer: Hangzhou Hikvision Digital Technology Co.,Ltd. Address: No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China FCC ID:2ADTD- K3B501SRE

a) b) c) d) e) f) g) Title:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Hangzhou Hikvision Digital Technology Co., Ltd. No. 555 Qianmo Road, Binjiang District Hangzhou 310052, China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Xiuying Zhang 2ADTD 2ADTD-K3B501SRE zhangxiuying@hikvision.com

+86-571-88075998 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Date:2020/7/4 Applicant Signature:

Print Name:

Xiuying Zhang Senior Certification engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Confidentiality Request regarding application for FCC ID: 2ADTD-K3B501SRE No. 555 Qianmo Road, Binjiang District, angzhou 310052, China SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Hangzhou Hikvision Digital Technology Co., Ltd. To:

From: Hangzhou Hikvision Digital Technology Co., Ltd. Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code): Xiuying Zhang Title: Senior Certification engineer Company Name: Hangzhou Hikvision Digital Technology Co., Ltd.

Hangzhou Hikvision Digital Technology Co., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 2020-07-04 Regarding: FCC ID: 2ADTD-K3B501SRE To whom it may concern:

We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Hikvision Digital Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiuying Zhang Title: Senior Certification engineer Signature:

On behalf of Company: Hangzhou Hikvision Digital Technology Co., Ltd. Telephone: +86-0571-88075998-62460