FCC ID: 2AKUR-IQ3 FPT Camera

IQ3 fast user manual By WiFi AP mode 1. Camera connect power supply. 2. After led light flash and pan move, use mobile wifi setup to search AP hotspot FC-xxxxxx, wifi password is the first 14 serial code. 3. Open APP(FunSDKDemo-FSSXM), follow below instructions step by step:

open this app click here. Media function click here. Play live video click here. Device list(Lan) Choose this device and click . click here.Control device input password here.(QRCz7gHxm) 4. Start live video. By lan cable mode 1)power on the camera,connect lan cable 2)Open VMS->device manager->search->add device, admin / QRCz7gHxm 3) start live view FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Appendix ID Label FPT Camera FCC ID: 2AKUR-IQ3 Model: FPT Camera IQ3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Size for the label: 30mm X 30mm Appendix ID Label Location FCC ID: 2AKUR-IQ3 TB-RF-074-1.0

Hangzhou Jufeng Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 7/28/2023 Hangzhou Jufeng Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AKUR-IQ3):

Name and company of U.S. agent: ACT Lab LLC Physical U.S. address of agent: 3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent: 0033465568 Email address of U.S. agent: shuber@act-lab.com ACT Lab LLC acknowledges their obligation to accept service of process on behalf of Hangzhou Jufeng Technology Co., Ltd. Hangzhou Jufeng Technology Co., Ltd. with the FRN 0026154054 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature Fang Lai Manager Hangzhou Jufeng Technology Co., Ltd. 4 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature Mr Scott Huber Senior Technical Director ACT Lab LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

Hangzhou Jufeng Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/27/2023 To whom it may concern:

We, Hangzhou Jufeng Technology Co., Ltd. hereby certify that the equipment for which authorization is sought (FCC ID: 2AKUR-IQ3) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, Signature Fang Lai Manager Hangzhou Jufeng Technology Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. 2 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9

. 2 _ u q E d e r e v o C

l e d o m

_ 2 6