BrightVIEW User Manual SEW-3057W.indd 1 2016-12-23 11:48:39 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturers 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. apparatus (including amplifiers) that produce heat. instructions. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/ accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lighting storms or when unused for 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. long periods of time. BrightVIEW User Manual Copyright 2016 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization. Disclaimer Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the users own responsibility. Hanwha Techwin reserves the right to change the contents of this document without prior notice. SEW-3057W.indd 2 2016-12-23 11:48:40 SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS interference received, including interference that may cause undesired operation. FCC Caution :
Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and (2) this device must accept any Note :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and monitor. Connect the equipment into an outlet on a circuit different from that to which the monitor is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided. Some adult assembly or installation required. This product contains small parts that may cause choking. Keep small parts away from children. This product is NOT intended to replace proper supervision of children. You MUST check your Before using this product, read and follow all instructions contained in this booklet, and read and childs activity regularly, as this product will not alert parents to silent activities of a child. follow all instructions and warnings on the product. basement, etc. NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet This product is intended for indoor use only. This product is not intended for use as a medical monitor and its use should not replace adult supervision. The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a child. If the child moves outside of this range, if may not be able to detect sounds from him or her. It is essential that you check the operating range and condition of the transmitter monitor on initial installation, and on a regular basis after that. Check reception regularly. Test monitor before use and after changing camera location. The wireless signal transfer range may be shortened if an obstacle such as a concrete wall is in between the camera and monitor. To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos). Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation. Use only the AC adapters provided with the product, as other adapters may damage the product. Plug the adapters only into standard household current (100~240 volts AC). Place the AC adapters avoiding pinch points otherwise you can damage the adapters. adapters cord. When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC Do not use extension cords with the AC power adapters to avoid entanglement. This product should only be serviced by qualified and authorized Hanwha Techwin service centers. Images and sounds are transmitted by the product over public airwaves and transmissions may be picked up by other units. (Although the transmission distance is 100m or longer, it may vary depending on whether there are obstacles between the camera and the monitor.) Caution if you use the system to watch a young child, do not place the camera where the child can reach. When using the system with only battery power and the charge is low, then the picture and or sound may affected. If this occurs then please connect the AC power adapter. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. FCC Radiation Exposure Statement for Wireless Camera This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SEW-3057W.indd 3 2016-12-23 11:48:40 INSTALLATION How to Install 15 Wireless Monitor 15 Wireless Camera 15 REMOTE VIEW Remote 16 APPENDIX Specifications 18 Troubleshooting 19 Contents WHATS INCLUDED Package Contents 5 GETTING STARTED Functional Description 6 Powering your monitor 6 Operating the System 6 VIEWING MODE DISPLAY Indicator Description 8 How to use the indicator 8 Menu Operation 10 How to use the function tools 10 How to use the setup icon 11 OVERVIEW Getting to know your Monitoring system 12 Wireless Monitor 12 Wireless Camera 14 Wireless Wrist Band 15 Sensor 15 SEW-3057W.indd 4 2016-12-23 11:48:40 Whats Included Package Contents The system comes with the following components:
Wireless camera Wireless monitor User Manual & Warranty Card Camera Adapter Monitor Adapter Plastic anchor (1EA) & Screw (1EA) Wireless wrist band Wrist band Adapter Sensor Check your package to confirm that you have received the complete system, including all components shown above. SEW-3057W.indd 5 English 5 2016-12-23 11:48:45 01Whats Included GettInG started Functional Description Powering your monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Operating the System The basic operation is as follows:
Camera and Monitor pairing The units already come paired for your convenience. This button is used to add an additional camera. User can select camera number to assign. Up to 4 Cameras may be paired. 1. Power on wireless monitor and wireless camera. PAIR 2. Touch the live view screen on the monitor, and then the settings icon will appear.
] button on the monitor. 3. Press the [
4. Select [
] icon. 5. Select camera number. The monitor search a camera which sets to pairing mode. A count down clock appears at the middle of screen which starts counting from 30 to 0. will automatically switch to the camera's current view. 6. Press the [PAIR] button on the camera bottom. 7. Within 30 seconds, if the monitor successfully pairs with the camera, the monitor Monitor and wrist band pairing 1. Make sure the monitor should be power. 2. Touch the view screen on the monitor, and then the setting icon will appear. 3. Press the [
4. Select [
5. The monitor will search the Bluetooth device. Choose the Bluetooth and if pairing
] icon
] button on the monitor, come into "Menu" interface.
] icon, mark sure the Bluetooth should be show [
success, the monitor will show Paired and the Bluetooth will show [
in the wrist band.
] . Wireless Monitor You can use the device while charging with connected adapter, and the device is portable if charged. Wireless Camera The Wireless Camera must be plugged in at all times in order to view. Wireless wrist band negative positive negative The wireless wrist band must be charging with adapter and the device is portable if charged. 6 Getting Started SEW-3057W.indd 6 2016-12-23 11:48:48 Voice activated (VOX) Select to monitor significant sound with reduced ambient noise. The screen goes off in VOX mode if there is no significant sound louder than a certain level about 30 seconds. Meanwhile, the monitor screen turns on as soon as detecting sound around the camera. In VOX mode, you can set the sensitivity. Low Sound Level Detection : Sets to higher sensitivity. High Sound Level Detection : Sets to lower sensitivity. Remark:VOX on, and once VOX trigger, the Bluetooth will alert and shake for Dozens of seconds. You can stop the alert by press the Bluetooth button at the side of Bluetooth. Once the wristband go beyond of the limit distant of Bluetooth, it will alert for several seconds, then you can stop alert by pressing the Bluetooth button. Multi camera mode Press [
According to the paired camera, screen split mode is different. When two cameras are paired, it displays as 2-split mode. When there are more than 2 cameras are paired, it displays as 4 split mode. Up to 4 cameras can be paired. Out of Range If the monitor is outside of transmission range with the paired camera, the Out of Range message appears with warning beeps at regular intervals.
] switch the split mode.
/
SEW-3036W Two-way talk Press the [
] icon while talking. SEW-3057W.indd 7 Sound level The louder the sound around the camera, the more LEDs turn on. Night Light Touch the [
deactivate the night light on the camera.
] button on the camera to remotely activate or
[Camera]
Remote PTZ and Zoom You can remotely control the camera to pan, tilt and digital zoom. Use [
] icons on the wireless monitor to control the camera. Use [
] icon to zoom in and out. Sequence View Press the "Sequence View"button, it switches to cam1 viewing.After 10 seconds, it automatically switches to cam2 for another 10 second. Util largest cam number is viewed for 10 seconds, then it loops back to view cam1 again. English 7 2016-12-23 11:48:51 02Getting Started VIeWInG Mode dIsplay Indicator Description How to use the indicator a b c d e fghij k12 13 14 17 16 15 a Signal Indicator The signal indicator shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal One or no bars indicate the signal is poor, and 5 bars indicate a strong signal. b Digital Clock Displays the time that is set on the monitor. It only provides AM / PM time format and no 24hour format. c Camera Number Indicates which camera is being displayed on the current screen. When scan mode is selected, this icon will flash. d Sound level Indicator Indicate the sound level of the Active Camera. SD card Unsupport SD card
] icon on the monitor to e Remote View Remote access with free Apps for smartphone. f SD card status No SD card g x1/x1.5/x2 Zoom mode Indicates that current screen is Zoomed in. Press [
zoom back out. h Night Vision Indicator Indicates camera night vision mode is turned on. The screen will appear in Black/White in this mode. i VOX On Indicates remaining battery charge. Indicated in 4 levels, and one discharge warning. j Monitor Speaker Mute Indicates the monitor speaker is muted. Once the monitors speaker is muted, no sound from the camera is produced. k Bluetooth Indicated the Bluetooth turn on or off. 12 Battery Capacity Level Indicates remaining battery charge. Indicated in 4 levels, and one discharge Charging: Indicates the battery is charging by DC input power. warning. If battery nearly empty, it will flash to alert user to charge up the unit. 13 Feed time A remind for Feed time counter. 14 Two-way talk Press the [
15 Air quality display Indicates air quality display good or normal or bad according to the sensor.
] icon while talking. 8 Viewing Mode Display SEW-3057W.indd 8 2016-12-23 11:48:56 16 Humidity Display Indicates the percent of air humidity according to the sensor. Humidity Alert range : below 45% above 65%
17 Temperature Display Indicates the temperature value according to the sensor. No Signal Warnings The "Out of Range" message means the monitor cannot access the camera. Please reposition the camera, or check the camera power. SEW-3057W.indd 9 English 9 2016-12-23 11:48:56 03Viewing Mode Display b -1 Photo Diary If you choose date, it will show the baby's photo. b -2 Pair / Unpair Camera The LCD suppor up to 4 cameras, you can choose the camera to pair with the monitor or unpair. b -3 Settings You can setting Vox, date & time, feed timer, phto diary setting and brightness. Detail please refer to page 11 b -4 Bluetooth you can see the bluetooth connected on or not. b -5 Night Light On/Off You can remote the night light. it show the night light on or off. c Monitor Volume Using the [
d Zoom IN / Zoom Out When x1/x1.5 Zoom mode, the magnifier icon is [
will zoom in video image. When x2 Zoom mode, the magnifier icon is [
means press this icon will zoom out video image. e Lullaby Press the icon to turn on and turn off lullabies.
] icons, you can adjust the monitor volume.
/
] inside, means press this icon
] inside, Menu Operation How to use the function tools Press the screen of the monitor to display the menu screen. a b dc e a Navigation Controls Using the navigation [
b Menu Setting Menu setting mode is including monitor and camera settings.
] icons, you can control camera angle. b-1 b-2 b-3 b-4 b-5 10 Viewing Mode Display SEW-3057W.indd 10 2016-12-23 11:49:01 Settings Settings e Brightness Adjusts the brightness of the image shown. If you are using multiple camera, you can adjust the brightness of each individual camera.. f Environment Sensor Show the temperture, humidity and air quality, once out of the limit, it will alert. Sensor Alert range (cant change by users) Humidity range : below 45% above 65%
Air quality : above 200g. g Set Camera Speaker Volume Adjust the volume of the speaker on the camera in this menu. The volume can be adjusted from 0 to 5, with 5 being the loudest setting and 0 is mute. Settings Settings h Reset Choose <YES> to reset the monitor to factory defaults. All settings except for time and date information will be reset to the factory defaults. How to use the setup icon Press the [
To return to the Live screen, press the [
] icon.
] icon to save the changes and return to previous menus. a b c d Settings h e f g Settings Settings Settings Settings
] or [
] icon to a Vox Setting low or high sound level dectection. Detail please refer to page7. b Date & Time Setting Set the date & time shown on the monitor. Use the [
change the numbers in the selected field. c Feed Timer Set the feed time shown on the monitor. Use the [
the numbers in the selected field. d Photo Diary Setting You can set your baby's birthday and capture time. Use the [
icon to change the numbers in the selected field. If you set the capture time, the camera will take photo only one a day, and if you do not satisfied with the photo of the day, you can reset the capture time, the intraday photo will automatically overwrite.
] icon to change
] or [
] or [
]
SEW-3057W.indd 11 English 11 2016-12-23 11:49:04 03Viewing Mode Display oVerVIeW Getting to know your Monitoring system Wireless Monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Front Controls Monitor Antenna Receives and sends signals from or to the camera. 5 LCD Screen Displays video from the camera. Navigation Controls Viewing Mode: The following controls are used while watching live video from the camera:
Press the [
Press the [
Press [
] or [
] or [
] icon to zoom in/out the screen.
] icon to adjust cameras framing upwards or downwards.
] icon to adjust cameras framing to the left or right. While in zooming, use [
] icon to move the screen around. Microphone Transmits audio to the camera when [
pressed down and receives sound for the area near the camera.
] icon is Menu Mode: Press the [
] icon to confirm the menu selection. 12 Overview SEW-3057W.indd 12 2016-12-23 11:49:05 Back Controls Power On/Off Turn on/off the wireless monitor. Speaker Produces the sound transmitted from the camera(s). Side Controls Power On/Off Turn on/off the wireless monitor. Speaker Produces the sound transmitted from the camera(s). Mirco SD SD card external storage, up to 32GB supported Kick Stand Use to hold the monitor onto a table. DC 5V Power Input Connect the included AC power adapter to power and/or charge the monitor battery. (when the monitor is not placed in the optional Charge cradle). Mirco SD SD card external storage, up to 32GB supported DC 5V Power Input Connect the included AC power adapter to power and/or charge the monitor battery. (when the monitor is not placed in the optional Charge cradle). n ` You must have more than one camera configured on the system when using the functions that requires more than one camera. SEW-3057W.indd 13 English 13 2016-12-23 11:49:07 04Overview Wireless Camera Front & Back Controls IR Sensor Infrared LEDs sensor Microphone Receives sounds for the area near the camera, and transmits sound from the camera to the monitor. Bottom Controls Speaker Produces the sound transmitted from the monitor. PAIR Button Press this button to pair with a monitor. RESET PAIR ON OFF n ` Remotely control Night Light ON or OFF is available only when the camera is paired to the monitor. 14 Overview SEW-3057W.indd 14 Night Light Button you can turn the night light on or off by touch the button or remotely control. Camera Antenna Sends & receives signals to or from the monitor. Sensor Temperature and humidity sensor and dust sensor. DC 5V Power Input Connect the adapter to the camera. Night Light Button you can turn the night light on or off by touch the button or remotely control. RESET Button Press this button to reset the wifi. Power Slide Switch Turns the camera ON or OFF. 2016-12-23 11:49:10 Wireless wrist band The button of the Wireless wrist band function:
1) press the button when the wireless wrist band black srceen, it will shin last for 6 seconds. 2) When wireless wrist band shake, by pressing the button can stop it shake. Button Show AM or PM. Sensor USB cable Show the time. Indicated battery and charging status. Once Bluetooth pairing, the icon show. Humidity and temperature sensor Dust sensor fan Dust sensor light Good (Green, 0 -100g) ;
Normal (Yellow, 101 - 200g) ;
Bad (Red, above 200g) InstallatIon How to Install CAUTION: If you use the system to watch a young child, do not place the camera in the child's reach. Wireless Monitor 1. Place the monitor in a place that will have clear reception with your camera(s). 2. Pull out the stand. n ` Do not pull up the stand lever with an excessive force. SEW-3057W.indd 15 Wireless Camera Before you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter. Before starting permanent installation, verify its performance by observing the image on the monitor when camera is positioned in the same location/position where it will be permanently installed and the monitor is placed in the location where it will be used most of the time. Installation Warnings Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor. STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided. 1. Carefully unpack the camera. If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation. 2. Mount the camera to the wall. Mark the position of the screw hole on the wall, and drill hole and insert 1 screw, then firmly attach the camera to the wall by placing the stand over the installed screw and pushing the base downwards. n ` To install on a concrete wall, drill a hole and use
` Use the drilling template to drill holes on the wall for
` The camera can also be placed on a flat surface, such camera installation. (Page 21) plastic anchor to fix. as a table or shelf, and no mounting hardware is required. 3. Adjust the viewing angle of the camera. Use the Pan, tilt control from the monitor to adjust the viewing angle of the camera. English 15 2016-12-23 11:49:16 05Installation reMote VIeW 1. Go to App store to download and install "Baby View" into your Mobile phone and install .(picture1) 2. Power the camera. 3. Press the "reset" button on the camera. 4. Press "setting button" of your cell-phone to search the camera Wi-Fi, touch the camera Wi-Fi to connect. (picture2,3) 5. Click the APP, then click "tap here to add device" (picture4). 6. Scan the QR code of the bottom camera, default password "000000",click OK
(picture5,6). The monitor will show remote icon when remote connect with baby unit via APP Baby View. And there is another way to connect for remote:
7. Research and now you can see your camera and UID, and you could reset the WLAN network by click the icon "
8. Touch WLAN Networks and select the local network, input your local Wi-Fi password. Press OK to complete setting. (picture8~11) 9. You can use WLAN network to choose a local router for the camera, and change the camera to internet mode. (picture12,13)
" (picture7) picture4 picture5 picture6 picture7 picture8 picture9 picture1 picture2 picture3 16 Installation SEW-3057W.indd 16 picture10 picture11 picture12 2016-12-23 11:49:29 picture13 SEW-3057W.indd 17 English 17 2016-12-23 11:49:30 05Installation appendIx Specifications Image Sensor Type Effective Pixel Resolution Image Compression Max.Framerate Streaming Capability IP Protocol Streaming Method Max. User Access White Balance Wireless Camera 1/4 Color CMOS Image Sensor H: 1280, V: 1024 High : 2.5 Mbps(1280x720@~15fps), Middle : 1.5Mbps(704x480
@~20fps), Low : 700Kbps(704X480@~ 10 fps) MPEG4 20fps @704x480 Uni IPv4 UDP, RTSP, NTP, DHCP, HTTP Unicast 4 Users simultaneously Auto Item Lens Viewing Angle (Diagonal) IR LED Type/ Night Vision Lullabies Night Light Loud Speaker Output Power Requirement Power Consumption VOX level detection Operating Temperature Range Operating Humidity Range Environment Rating Pan Angle Panning/tilt Speed Tilt Angle Regulation Compliance RoHS Compliance Audio Weight Display Type/Size Resolution Touchscreen SD card slot Digital Zoom Real Time Clock (RTC) Details EFL=3.95mm, F=2.2 55 degree IR LED 940nm /5m 4 songs (Monitor Remote On / Off) Yes (Manual & Remote On/Off) (Amber color, 3000-3500K) 0.5W, 90dB spl DC 5V 10%
4.5Watt (Normal)6.0Watt(IR On) Low: 50dBA / High: 60dBA 0C~+40C 85% RH Indoor use only 300 12 degree per sec. 110 FCC/CE/IC (Canada certification) Yes for CE version only Built in Microphone/ Speaker 256g Wireless Monitor Color TFT 5 800X480 Resistive touch type Yes (Micro SD / not included) X1.5, x2
+/- 4sec / day 18 Appendix SEW-3057W.indd 18 2016-12-23 11:49:30 Details Yes (beep sound) 0C ~ 40C Humidity range : below 45% above 65%
Air quality : above 200 Bluetooth connection Up to 4 cameras Adapter : DC 5V 10%, Battery : 3.8 Li-ion 1W, 85dB spl 5.5Watt (max) 0C~+40C 85% RH Indoor use only FCC/CE/IC (Canada certification) Yes for CE version only Built in Microphone/ Speaker Bluetooth Sensor connection, Volume control, Pairing Li-ion 2500mAh Rechargeable battery pack, Replaceable Min 4 hours (Video on) 224g Wireless wrist band Soft Silicon Vibration Li-ion (38mAh Rechargeable battery) Item Feed Timer Alert sensor temperature alert range
(User range) Sensor Alert range (cant change by users) Wrist band alert Number of Camera Support Power Requirement Loud Speaker Output Power Consumption Operating Temperature Range Operating Humidity Range Environment Rating Regulation Compliance RoHS Compliance Audio Other Special Feature Battery Type Battery Capacity Battery time duration Weight Material for band Alert Method Battery Type SEW-3057W.indd 19 Item Display Control part Transmission range Weight / Strip length Temperature sensor Humidity sensor Air quality sensor (Dust) Sensor light Weight Details Digital watch / Battery check / connection check push toggle 10 meters 9g/150 - 220mm (adjustable range for length) Sensor Yes (+/-2 degree), Yes (+/-3%) Yes (Dust) Good (Green, 0 -100) ; Normal (Yellow, 101 - 200) ; Bad (Red, above 200 69g Troubleshooting Problem No picture from a camera The picture is or has become choppy No sounds (even with both units turned on) Solution 1. Check all connections to the camera. Make sure the adapter is plugged in. 2. Make sure that the cameras and monitor are both ON. 3. Make sure that the camera is in range of the monitor. 4. Make sure the camera and monitor are paired. 5. Adjust the monitor antenna to vertical position. The picture may become choppy when experiencing a lower frame rate
(i.e. 10 frames per second vs. a higher 20 frames per second). 1. Try moving the camera closer to the monitor. 2. Remove obstructions between the monitor and camera. 3. Adjust the monitor antenna to vertical position. 1. Make sure that the power adapter is connected to the camera. 2. The battery on the monitor may be dead, be sure to charge it using the 3. The monitor may be out of range of the camera; be sure to check if the adapter included. Range LED in on continuously. 0 6 A p p e n d x i English 19 2016-12-23 11:49:31 Solution Problem Your BrightVIEW is emitting an high pitched noise/
feedback. n ` Low batteries will cause the supply current to become unstable and will affect the quality This sound is normal feedback which occurs if the monitor and camera are too close together. Move them further apart. of the video/audio. Please charge the battery fully for use for superior video. Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. SEW-3057W.indd 20 2016-12-23 11:49:31 TEMPLATE This template is used to install the camera on the wall. Screw holes for the Camera installation PAIR ON OFF RESET CAMERA FRONT SEW-3057W.indd 21 2016-12-23 11:49:31 MEMO SEW-3057W.indd 22 2016-12-23 11:49:31 Head Office 86 Cheonggyecheon-ro Jung-gu Seoul 04541 Korea Tel +82.2.729.5277, 5254 Fax +82.2.729.5489 www.hanwha-security.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel +44.1932.57.8100 Fax +44.1932.57.8101 SEW-3057W.indd 23 2016-12-23 11:49:32