http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0168 User Manual EMC compliance Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-390, Korea 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced, except in full, Without the written approval. SAMSUNG SMARTCAM User Manual SNH-E6110BN 0678 !
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Operational Description The operational description shall fulfil the requirements of Rule Part 2.1033(b)(4). The rule part requires, "A brief description of the circuit functions of the device along with a statement describing how the device operates. This statement should contain a description of the ground system and antenna, if any, used with the device". The above requirement has been further interpreted by the FCC to mean that the description shall:
a. be an operational or technical description of how the device operates, is modulated and meets requirements;
b. describe the EUT completely. What is it (in plain English as well as technical terms)?
Give a clear, concise functional description of device operation. c. always describe the signal, such as modulation type, pulse repetition rate, signal type and information being sent. Describe all modulation types and all data rates. Instructions & Warranty The manufacturer is not responsible for any loss or radio/TV interference caused by unauthorized modification of the product. Such modification will void the warranty of the product as well as the users right of use. WARNING The product must be assembled and installed by an adult. Before using, read all instructions on this manual thoroughly and follow operational To avoid entangled power cord, do not place it around the baby bed or other infant instructions, warnings on this manual and printed on the product. furniture. Keep this product and its power cord out of childrens reach. Samsung SmartCam User Manual Copyright 2014 Samsung Techwin Co., Ltd. All rights reserved. is the registered logo of Samsung Techwin Co., Ltd. Trademark The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the users own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice. childrens reach. avoid moisture. Especially, the power cord should be installed carefully while keeping it out of Never use the product near bath tub, sink, washing machine and in wet basement to The product is designed for indoor use. The product is not designed for medical monitoring, and requires a grown-ups To avoid overheating of the product, do not expose the product to direct sunlight; do protective supervision on its use. not install or use near a heat source such as heater, radiator, cooking devices (ex:
electric stove or oven) and other warming devices (ex: audio amplifier, TV, etc.). Make sure to keep ventilated while using the product. Avoid pillar or furniture that may block ventilation, when installing the product. Make sure to use the power adaptor provided. If used with unidentified adaptor, it may damage the product. The power adaptor must be used with regular household electric supply. Avoid sharp, pointed objects around the adaptors cable, not to damage the cable. Be warned and never hold the cables stripped part when connecting / disconnecting To avoid entangled cable lines, avoid using cable extension for adaptors power cord. The products servicing is allowed only to authorized Samsung Techwins service When using the product for childrens care, be careful to keep the product out of The product partially contains component which might cause respiration difficulty. personnel. childrens reach. Accessories and small parts of the product should be stored keeping out of childrens reach. children. accidental/sudden childrens move; it requires periodic checks and human supervision. This appliance and its antenna must not be collocated or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. The product is not designed to replace responsibility of human supervision on The product is not equipped with device of immediate notification to adult with the adaptor to/from the wall outlet. Contents GeTTinG STARTeD Features 4 Whats Included 5 Part names and functions 6 inSTALLATion & neTwoRk ConneCTion Installation 8 Network Connection and Settings 9 MoniToRinG Registration 10 Live Video 13 Setup 15 Event Alarm 21 Information 22 AppenDix Specifications 24 Troubleshooting 27 GettinG Started 01 Features 4 whats included part names and functions Power Supply Network connection 5 6 7 7 Features easy to install
- Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program. Remote monitoring monitoring is ready for you.
- Whenever and wherever if you are in the Internet enabled environment, remote
- PC, laptop or smart phone can be used for monitoring.
- When a motion and sound are detected, your smartphone will generate real time
- Users can automatically upload event photos to their Picasa accounts.
- Anytime anywhere you can enjoy the video and images stored in the cloud
- With the built-in speakers and microphone, you can make Two-way communications. However, it is available only with the smart phone. (Not applicable to the PC or laptop computer.) SnS (Social networking Service) Alarm supported
- Provide event alerts through Picasa.
- Share your photos with your friends. iR LeD
- At low illumination levels, you can use an IR LED for monitoring purposes. Real-time alarm alarms. Cloud Storage storage. Two-way Audio 4 English Whats Included Check for components when opening the product package. Camera Power Adaptor Quick Start Guide Warranty Card GPL Lisence n ` Please save the packaging. You will need the serial number later to register the camera. 5 01Getting Started Part names and functions Camera lens Built-in Mic power / wi-Fi status LeD 6 English Speakers Generate audio output from your smart phone. wi-Fi Direct button Create a Wi-Fi connection for your camera and smart phone. Reset button Resets the camera settings to the default. Press and hold for about 10 seconds to reboot the system. DC 5V power input Connect to the power adoptor. power Supply Plug-in the camera power adapter to the wall outlet and connect the camera as shown. n ` Make sure to use the provided power adaptor. If you use an adaptor other than the power supply adaptor provided in our package, the product may not operate properly.
` It will take about 1min for the camera to boot-up completely.
` When the boot-up is complete, the power LED color will change from red to blue. network connection Connect the provided network cable to the cameras network terminal. For further details on network configuration, refer to network Connection and Settings. (Page 9) LeD status LED indicator shows operational status with colors. Refer to table below for detailed meaning of the LED indicator. Color Red Red Blinking Blue Blinking Blue Green Magenta Status Booting up Booting completed / Establishing network connection Connecting to the network. Local connection established Connection to server completed / Normal operation Updating firmware 7 01Getting Started inStallation &
network ConneCtion 02 installation Precautions Adjusting the Angle network Connection and Settings Precautions Conneting using Wi-Fi WPS feature 8 8 8 9 9 9 Installation precautions 1. Install the camera in a place where the Wi-Fi signal can be reached and without interference. 2. Keep it away from humidity such as around the humidifier. 3. Keep it away from direct sunlight, strong light or dust; install it in a place with clear view. 4. Do not install it in a place where there are a lot of obstacles. 5. Keep the lens clean at all times. Wipe off the dust with a soft cloth. Adjusting the Angle 1. Adjust the cameras shooting angle as appropriate. 8 English environment. administrator or service provider. the service. If this is the case, contact the service provider. Network Connection and Settings precautions The wireless network access may fail, depending on the communications For details about the network settings and password, contact your network For a specific Internet service requiring user authentication, you may not access Do not access the unauthorized network. The farther the distance from the Wireless Access Point, the longer time the If you fail to access the selected wireless network, try a different Wireless For more information about the router or the wireless connection, refer to the If the camera is connected to a multiple-Wireless Access Point network network connection may take. Access Point to make access. documentation of the router or contact the router manufacturer. environment, some video packets may be lost, depending on the network traffic load. According to the network policy (blocking UDP) of the service provider, the video transmission can be limited to 7 minutes. For more details, refer to the descriptions on page 15, <Relay Mode>. In addition to the above two situations, you may encounter a network delay or interruption due to the network conditions. Some hubs can have compatibility issues. Conneting using wi-Fi wpS feature What is WPS?
WPS enables to make connection between the camera and the Wireless Access Point with a simple click of the button. 1. When you apply the power, the power status LED is lit red, and it will change to red blinking when the booting is completed. 2. Press the WPS button on the camera for 5sec. Wi-Fi Direct button
<Wireless Access Point>
mobile 3. Register and select the camera according to guide of mobile guide. 4. Set your wireless network environment using the guideline <network> on n ` Registration is available only on the mobile camera. page 17.
` Using the camera's Wi-Fi Direct function, you can easily make a Wi-Fi connection from
` If you fail to connect to the Internet service, contact the service provider for details. your mobile phone. 9 02Installation & Network Connection 03 Network Time Alarm & Notification Alarm Schedule event Alarm information My Account Support 17 18 19 21 21 22 22 23 Registration Registration is available only on the mobile camera. web browser requirements Windows Windows XP, 7 supported
- Internet Explorer 8 or higher
(The 64-bit is not supported.)
- Firefox
- Chrome Mac Mac OSX 10.7 Lion or higher is supported
- Safari
- Firefox
- Chrome Starting SmartCam 1. From your PC, launch your web browser. 2. Go to http://www.samsungsmartcam.com. 3. Select preferred language. 4. Click <Sign up> or <Starting SmartCam>. MonitorinG Registration 10 Web browser requirements 10 Starting SmartCam 10 Live Video 13 Monitoring options 14 Setup 15 Basic Info 15 10 English plug in installation You need to install your plug in view the video in your camera. n ` If you login or click <Starting SmartCam> in a PC where the plug in is not installed,
` When you install the plug in, the web browser will be terminated and you need to the installation message window will pop up. launch it again. 1) Click <Download plug-in>, run the setup file. For windows 2) Click <next>. 3) Click <install> to begin the installation. 4) Installation has completed. 11 03Monitoring For Mac 2) Click <Continue>. 4) Enter MAC PC password and click <install Software>. 3) Click <install>. 5) Installation has completed. 12 English 5. Enter the requested information, and click <Sign Up>. Live Video 1. Select a camera from the camera list at the upper left hand of the screen. using 8 to 14 letters. ID : Using alphabetical characters and numbers, make a combination Password : Create password between 8 to 14 alphanumeric character. Confirm Password : Please enter the password again for confirmation. Name : Enter the user name. E-mail : Please make sure you enter correct email address as you will have to use the email address to receive temporary ID/password when you lost your user ID or password. n ` The gray icon indicates the camera is inactive so you cannot monitor it right now. 2. Enter the camera password and click <Apply>. n ` Check on <Remember> to access your camera without entering the password next
` If you want to change the Camera password, please refer to <Basic Info> on page 15. time. 3. Live video will be displayed on the screen. 13 03Monitoring Monitoring options b ca n m l d e f g h i j k Item a Default Camera b Delete Camera c Cancel remembering camera password d Night Vision Description Set the default camera to monitor in the camera list. Delete the registered camera. Cancel remembering the camera password. If Night Vision is set <ON>, it will automatically switch to black and white mode in the dark condition and then the IR lamp will automatically operate. If Night Vision is set <OFF>, it does not switch to night vision mode and it will operate in color mode. 14 English Item e WDR f Motion zone setting g Flip h Manual recording i Network Speed j Capture Image k Sound l Brightness m Hide/unhide detailed menu n Audio Description A dark spot will be brighter and a bright spot will be darker to compensate for the backlight. It detects motion within the range set by a user. You can flip over the video image. A user can directly save videos in their SD card.
` 30 minute long video is saved.
` If there is an ongoing event now or overwrite to SD card is not checked, and there is storage space of 10% remaining, you cannot perform manual recording. Set the network speed (low/mid/high).
` If the bandwidth provided by your internet service provider is smaller than the recommended value, then the video might get fuzzy or temporary disconnections or delays in the live video may be caused. Live video is saved as one image. When enabled, you can hear whats happening around the camera.
` Some internet service providers do not support audio outputs in relay mode. You can adjust the brightness of the screen image.
] icon to unhide or hide detailed setting menu. Click on the [
Adjust the volume of the built-in microphone and speaker of the camera as appropriate. If you set the mic setting to '0', you will not hear the live audio, and it will not be recorded in your SD card. Note that the Two-way audio transfer function is available only with the smart phone application. network Speed Profile Name Low Speed Network Mid Speed Network High Speed Network Resolution VGA HD(720P) Full HD(1080P) Frame rate 20 fps 15 fps 30 fps Recommended bandwidth 0.7Mbps 1Mbps 2.8Mbps Setup Basic info n ` What is relay mode?
If the network condition is unstable, the camera cannot make a normal connection
(P2P), so it will set up a connection in relay mode. In this case, you will see the video for the first seven minutes only. Samsung server then retransmitted to the user's computer.
` Relay mode is added feature where the video from the camera is transmitted to
` If you have trouble connection to the camera, visit "http://www.samsungsmartcam.
` It is recommended to use one browser at one time.
` The Night Vision video produces a different visibility according to the distance between com", go to support page, and refer to Troubleshooting on it. camera and subject. Motion detection area setting 1) Click the <
2) Drag it to the screen to set the detection area.
> icon. If you want to delete the set area, click on <Delete All>. 3) Click on <ok>. n ` The <Motion Detection> function needs to be activated in order to use the motion zone function. a b c d e f 15 03Monitoring Item a Serial number b Camera password c Camera Name d Firmware Version e Status LED f Flickerless Description You can confirm the serial number. Click the <Modify>, you can change the Camera password. Enter the current camera password, and type a new Camera password. Click the <Modify>, you can change the camera name. You can check the current version and the latest version of your camera S/W. You can turn on/off the LED in your camera. You can reduce the occurrence of screen shaking due to the frequency mismatches with the neighboring lighting. Firmware update If the currently used S/W is not of the latest version, update it. If you are using the latest version, then the firmware will not be activated. 1) Click <Firmware>. 2) Click the <
> icon to update the firmware. n ` If you change the camera password, you will be logged out and return to the camera
` Keep the camera password in a safe place as it is used for viewing the live screen of password input page. the camera or for changing the display settings. 3) When the firmware update is finished, the camera will reboot. n ` If you want to update the firmware, it is recommended to use a wired network connection.
` If the power goes off during updates, it may not operate properly.
` The duration of the firmware update depends on the size of the firmware file and the network connection speed. 16 English network a b c d Item a Wireless On/
Wireless Off b AP (Access Point) list c AP (Access Point) password d Hidden SSID Description You can select to activate or deactivate the wireless network connection. You will see a list of APs (Access Point) available. Select a desired one from the list of APs (Access Point). If you select a secured AP (Access Point), you must enter the password before you can access the network. For the password, contact your network administrator. If your SSID is hidden, select the type of security you have. Enter the name of the SSID and the password. n ` If you select a non-secured AP (Access Point), you just can access the network without providing a specific password.
` If you entered a wrong password, you cannot access the network whatsoever.
` When the wireless network settings are completed, remove the LAN cable. If you do not remove the LAN cable, the wireless network will not be available. 17 03Monitoring Time n ` The time will synchronize with the NTP(Network Time Protocol) server automatically.
` For this, Internet connection is required.
` You need to set the timezone correctly to obtain the exact time setting.
` The time displayed without Internet connection may not be accurate. a b c d fe Description Confirm the camera's time. Select your region. Select the time format displayed in time setting. It sets camera's time automatically. Check this option if you live in a country or region where DST(Daylight Saving Time) is applied. Live screen displays the time. Item a Time b Time Zone c Display Time d Automatic Time e Daylight Saving Time f Time to show 18 English Alarm & notification Camera has ability to send event notifications when motion or audio is detected.
<picasa> notification Automatically uploads a image to your private Picasa account. 1. Select the Google. 2. Enter your Gmail address and password. 3. Click <Save>. 4. Check <Use> of Picasa. a Item a Alarm notification Description You can set motion or audio alerts. Sensitivity level can also be set. The higher the sensitivity, the more accurate motion and audio events can be detected.
` When an event occurs, if you want to send alerts to Picasa/Gmail, first log into your google account. n ` In the following case, it may fail to derive the proper results for basic events and motion detection.
- The object color or brightness is similar to the background.
- Multiple movements continue occurring at random due to a scene change or other reasons.
- A fixed object continues moving in the same position.
- An object hides other objects behind.
- Two or more objects overlap or one object divides in multiple portions.
- A moving object comes close to the camera. n ` If your Google email ID and password are saved, check the use of Picasa only.
` Refer to the policy of Picasa for the maximum number of uploaded images. 19 03Monitoring push alarm notification The push alarm is provided through the web viewer and mobile app in which the camera is registered.
<Gmail> notification The event alarm is sent through Gmail. 1. Select the Google. 2. Enter your Gmail address and password. 3. Click <Save>. 4. Select <Use> of Send alarms. 5. Enter your email address to receive the notification e-mail and click <Add>. Now, the receiver full email address will be shown in the List Box. If you want to register more than one email address, you can just repeat the same procedure. If you activated Use, then image links uploaded into Picasa will be sent to the Push alert list shows the list of IDs of users who registered cameras. friends listed in real time. When an alarm occurs, the web site will send push alerts to each smart phone.
<Receiver email address>
n ` If your Google email ID/password are saved, only check Send alarms.
` If the email address for the recipient entered is incorrect, event alerts will not be sent.
` Even if you entered a correct google account ID, if the ID/password confirmation pop up window appears, click on <Go to the google page.> and check the google account. 20 English Alarm Schedule Event Alarm Alarms will only operate for the times selected by the user. You can check the event alarm that occurred. a b a b c d e Item a Only Scheduled Time b Always Description Alarm function will only operate for the time/day designated by the user. Alarm function always operates. Item a Delete by dates b Image displays c Delete All d Display Events e Arrange by types Description Delete all the event alarms on the date. Select and click on the desired event. You can view an image.
` Image is displayed only if Picasa is activated. Delete all the event alarms for thirty days. Displays the number of events occurred in the 30 day list. Arrange the event list by event types. n ` Even if you delete an event in the event notification page, the Picasa event will not be deleted. 21 03Monitoring Information My Account n ` If you want to change the member information, click on <Account>. Select the item
(password, or email address) and enter your information. 22 English Support You can download the Samsung SmartCam mobile app and user guide. 23 03Monitoring 04 24 24 26 27 appendix Specifications Specifications Product Appearance Troubleshooting Specifications Specifications Item OS Resolution Max. Framerate Video Compression Format Streaming Capability Angular Field of View (D/V/H) Low Light Performance WDR Day & Night Night vision Digital Zoom Flip / Mirror Motion Detection Audio Detection Description Linux 1920x1080, 1280x720, 640x360 1080p@30fps H.264, MJPEG Multiple Streaming (Up to 5 Profiles) 77.6/ 42.7/ 69.7 15Lux(Color) N/A N/A N/A 4X Support Support Support 24 English Item Audio I/O Audio Compression Format Audio Communication Memory Slot Recording & Playback Ethernet Wireless WiFi Direct Security Max. User Access Operating Temperature / Humidity Ingress Protection Input Voltage / Current Power Consumption Indication Color Dimension (WxHxD) Weight Description N/A G.711, G726 2-Way Audio (Built-in Microphone & Speaker), Half Duplex N/A Smartphone Recording N/A Wi-Fi 802.11 b/g/n (2.4G Single-band) Support (Push button) SSL (AES 256bit) 5 users at Unicast Mode 0C ~ +40C (+32F ~ +104F) / Less than 90% RH Indoor 5V DC / 1A Max. 5W 1 LED (Power, Status, Link) White 51 x 93.2 x 19.5 85g 25 04Appendix product Appearance 26 English Troubleshooting If you encounter a problem with your system, see the table below to solve the problem as quickly and easily as possible. Please follow the instruction below:
Problem I forgot my user ID/
password. Camera is not connected to the wireless hub. After logged in, I failed to register the camera. Action
-
- Move to Log-in page Forgot your ID/Password?, and enter the registered e-mail address to which we will send you the user ID and/or a new password. It can be spammed out depending on the policy of the email server. After logged in, it is advisable to change the temporary password provided. If the camera's wireless internet indication LED goes off too often, then it means that the camera installation location is not optimal for the wireless internet environment, so in this case, locate the camera close to the wireless hub and try to connect again.
- Check the password for the wireless hub and try again.
- Check that the serial number entered matches the label on the back of the
-
- Check the camera LED to see if it is green. If not, then check the network
-
camera. Enter the correct password for the camera registered again and try to register the camera again. connection. If you are still unable to register the camera after this, then reset the camera to factory settings and begin again.
(If you want to reset to factory settings, press and hold the initialize button on the back for 10 sec. Once initialized to factory settings, the camera will be restarted.) Problem The capture images in the camera will not be uploaded to Picasa. The video from the camera is temporarily lost. No sound is output from the video. I forgot my Camera password. I want to change my password and/or email address. Camera will be connected in a relay mode. Action
- Move to Setup Alarm & Notification and adjust the sensitivity as necessary.
-
From the Alarm & Notification setup, configure the Picasa notification settings. (See page 19 of the manual)
- Picasa has different service policies according to the country. The policy for your country may prohibit uploading to Picasa. Please first check the Picasa policy for your country.
- According to the Picasa policy, it may limit the uploading size. Check the allowable free space of your Picasa account, and if insufficient, delete the exiting images. The video from the camera can be delayed according to a network delay. Please check if the camera is installed in a place of proper wireless Internet communications.
-
turned On in your smart phone app.
- Click the Voice icon in the video playback page, or check if the voice is
- Some internet service providers do not support audio outputs in relay mode.
-
- Press the initialization button on the back of the product for more than 10
- After factory initialization, when you access the camera, you can reset the You must create a new camera password. seconds to reset to factory settings. password for the camera.
- After logging in, click on the <Account>. Select the item (password, or email address) and enter your information.
- Check the UPnP setting of the router.
- Using a network upload speed of 500Kbps or higher is recommended.
- Depending on the policy of your service provider, you can access in relay mode. 27 04Appendix Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwins devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. 29 04Appendix SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : 1-877-349-3149 www.samsungsv.com SAMSUNG TECHWIN EUROPE LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS TEL : +44-1932-45-5300 FAX : +44-1932-45-5325