FCC ID: APIHEADUNITAL Head Unit

Head Unit Owners Manual Model: 2415723 Table of Contents Wiring the stereo.pg. 2 Mounting the stereo.pg. 2 General button operation.pg. 3 System setup..pg. 4 Adjusting the brightness.pg. 6 Selecting sources.pg. 6 AM/FM tuner/Weather Band operation.pg. 7 Bluetooth operation.pg. 9 USB operation..pg. 10 Selecting the camera viewpg. 12 Specifications.pg. 12 Warnings.........pg. XX WIRING THE STEREO IMPORTANT: Disconnect the vehicles negative () battery terminal before beginning the installation. 1. Plug the vehicle harness into the receptacle on the back of the Admiral stereo. 2. Plug the vehicle antenna harness into the antenna port of the back of the Admiral stereo. MOUNTING THE STEREO Place the stereo against the mounting surface and secure with four sheet metal screws. GENERAL BUTTON OPERATION 1. Home/Power: turns the stereo on and off, and lets you access the home screen to choose sources. 2. Source: Cycle through sources one at a time. 3. Menu: Lets you return to the previous screen or enter the control menu of the source youre currently listening to. 4. Volume/enter: Turn the knob to raise and lower the volume, or to highlight desired control menu options. Press the center button to select the desired control menu option. 5. DIM: Lets you choose between Day and Night modes and access the brightness settings for the screen and buttons. 6. SUB+: Increases the subwoofer output level. 7. SUB-: Decreases the subwoofer output level. 8. Camera: Lets you display the rear camera view on the screen. 9. PRESET: Lets you access and select your radio preset channels or files and folders in a connected USB device. mode. 10. PREVIOUS: Lets you tune radio stations, start at the beginning of a track or go to a previous track in BT and USB mode, and fast rewind a track in USB mode. 11. PLAY/PAUSE: Lets you play or pause a track in BT and USB mode, and mute the output in AM/FM 12. NEXT: Lets you tune radio stations, jump to the next track in BT and USB mode, and fast forward a track in USB mode. SYSTEM SETUP Press and hold the VOLUME/ENTER button to enter the settings menu. 1. Press the HOME button to enter the source selection menu. 2. Turn the volume knob until SETUP is highlighted. 3. Then press ENTER. OR Audio control options 1. Turn the VOLUME knob to highlight AUDIO. 2. Press ENTER. 3. Turn the VOLUME knob to highlight the desired audio control setting. 4. Press ENTER. 5. Use the VOLUME knob to adjust the desired setting. 6. Press ENTER to set. Audio setting options:

Bass: -7dB +7dB Middle: -7dB +7dB Treble: -7dB +7dB Balance: Left 10 Right 10 (default: 0) Fader: Front 10 Rear 10 (default: 0) Preset EQ: Off, Flat, Jazz, Pop, Classic, Rock, Vocal Loudness: On/Off System options 1. Turn the VOLUME knob to highlight SYSTEM. 2. Press ENTER. 3. Turn the VOLUME knob to highlight the desired system control setting and 4. Press ENTER. 5. Use the VOLUME knob to adjust the desired setting. 6. Press ENTER to set. System setting options:

I-Volume: 0 40 Beep: 2nd/On/Off Location (tuner): USA, Europe, Japan About 1. Turn the VOLUME knob to highlight ABOUT. 2. Press ENTER to see system information. 3. Press and hold the VOLUME button to enter factory reset mode. 4. Turn the VOLUME button to highlight YES (reset to factory settings) or NO. 5. Press ENTER to confirm your choice. Note: Press MENU to return to a previous screen. ADJUSTING THE BRIGHTNESS Day/Night modes Press the DIM button to toggle between Day and Night modes (Night mode is 30% darker). Screen and button brightness settings 1. Press and hold DIM to enter the brightness control menu. 2. Turn the VOLUME knob to highlight desired brightness control (LCD or button). 3. Press ENTER. 4. Turn the VOLUME knob to adjust the brightness of the LCD or buttons. 5. Press ENTER when finished. SELECTING SOURCES 1. Press the HOME button to enter the source selection menu. 2. Turn the VOLUME knob to toggle available source selections. 3. Press ENTER to select desired source. OR Press the SRC button to select sources one at a time. AM/FM/WB TUNER OPERATION Tuning stations 1. Press the PREVIOUS and NEXT buttons to seek radio stations in auto tuning mode. 2. Or, press and hold the PREVIOUS or NEXT button to enter manual tuning mode. Selecting preset stations 1. Press the PRESET button to pull up the channel preset list. 2. Turn the volume knob until the desired station is highlighted. 3. Press ENTER to select the station. Muting the audio Press the PLAY/PAUSE button to mute the audio output. Setting preset stations When listening to a station you would like to save as a preset:

1. Press the MENU button for 3 seconds to pull up the settings menu. 2. Turn the VOLUME knob to highlight SAVE AS PRESET. 3. Press ENTER to select. 4. In the preset list, turn the VOLUME knob to highlight the desired channel number for the station you are saving as a preset. 5. Press ENTER to save. Engaging RDS 1. In the radio settings menu, turn the VOLUME knob to highlight RBDS (Radio Data Service) or TA

(Traffic Announcements). 2. Press ENTER to toggle between ON/OFF for RBDS and TA. NOTE: TA can only be turned on if RBDS is on. BLUETOOTH OPERATION Pairing a Bluetooth device 1. Bluetooth as the source on the stereo. 2. Find and select JBLHM43 on the list of available sources in your phones Bluetooth pairing menu. Selecting tracks Press the PREVIOUS and NEXT buttons to restart the current track, select a previous track, or jump to the next track. Pausing playback Press the PLAY/PAUSE button to pause or resume playing a track. Connecting or disconnecting a device To connect or disconnect a Bluetooth device:

1. Press the MENU button for 3 seconds to pull up the Bluetooth settings menu. 2. Press ENTER to connect or disconnect. NOTE: If a device is connected, disconnect will be the only option shown. If no device is connected, connect will be the only option. USB OPERATION Connecting a USB device Plug a USB drive or iPod into your vehicles USB input. Selecting folders and files 1. Press the PRESET button to pull up the folder list 2. Turn the VOLUME knob until the desired folder is highlighted. 3. Press ENTER to select the folder. 4. Use the VOLUME knob and ENTER button to select individual tracks in the folder you are browsing. Navigating tracks 1. Press the PREVIOUS and NEXT buttons to restart the current track, select a previous track, or jump to the next track. 2. Press and hold the PREVIOUS and NEXT buttons to rewind or fast-forward a track. Pausing playback Press the PLAY/PAUSE button to pause or resume playing a track. Changing the playback mode 1. Press the MENU button for 3 seconds to pull up the USB settings menu. 2. Turn the VOLUME knob to highlight desired playback mode. 3. Press ENTER to select. 4. Within the desired playback mode, turn the VOLUME knob to highlight desired playback option. 5. Press ENTER to select. Playback mode options:

Repeat:

1. ONE (one track) 2. FOLDER (all tracks in one folder) 3. ALL (all tracks on the USB device) Random:

1. ALL (all tracks on the USB device) 2. FOLDER (all tracks in one folder) 3. OFF INTRO: Plays a brief sample of the beginning of each song on the USB device CAMERA VIEW MODE Camera view will engage automatically when the vehicle is in reverse. To engage camera view when not in reverse, press the CAMERA button, and the image will appear on screen. SPECIFICATIONS Tuner bands AM Band for USA AM Band for Europe AM Band for Japan FM Band for USA FM Band for Europe FM Band for Japan Number of station presets Weather Band (NOAA 7-CH) Bluetooth version Bluetooth A2DP protocol Bluetooth AVRCP BT Max Power Bluetooth transmitter frequency range Serial Port Profile (SPP) Simple Secure Pairing (SSP) Number of paired phones Bluetooth auto reconnect Compatible media file formats Maximum number of files on USB device RMS Power Output (Watts x Channel) @ 4-ohm Frequency Response, +/- 3dB Signal-to-Noise Ratio THD+N @ 4-ohm (amplifier) THD+N @ 2.1Vrms (RCA outputs) Operating voltage Quiescent current Caution AM/FM 530 - 1710kHz (10kHz STEP) 531 - 1602kHz (9kHz STEP) 522 - 1629 KHZ (9kHz STEP) 87.5 - 107.9MHz (0.2MHz STEP) 87.50 - 108.00MHz (0.05MHz STEP) 76.0 - 90.0 MHz (0.1MHz STEP) 18 162.400MHz - 162.550MHz (25Khz step) 5.0 Yes V1.4 or newer 4 dBm 2402 MHz - 2480 MHz Yes Yes 5 Yes (most recently paired phone) MP3, AAC (on Apple devices), WMA, WAV, M4A, FLAC 9999 25W x 4 20Hz to 20kHz

>75dB 20%

1%

9V 16V

<0.2mA 1. The operating temperature of this product is 45 2. The product is a built-in component. The terminal where the product is installed should be used for the evaluation of product structure, and no consideration should be given to the temperature of the metallic casing. After the product is installed, only the operation panel is exposed to users. Notes:

1. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.This equipment has been tested and found to comply with the limits for a Class B digital device, pursua nt to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf ul interference in a residential installation. This equipment generates, uses and can radiate radio freque ncy energy and, if not installed and used in accordance with the instructions, may cause harmful interfer ence to radio communications. However, there is no guarantee that interference will not occur in a parti cular installation. If this equipment does cause harmful interference to radio or television reception, 3.which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 3.This device complies with Innovation, Science and Economic Development Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. 4.RF exposure statement: The equipment complies with FCC&ISED radiation exposure limits set forth for an uncontrolled environment. 5.Cet appareil est conforme la licence RSSs de Innovation, Science et dveloppement conomique Canada.Lexploitation est soumise aux deux conditions suivantes:

(1) ce dispositif ne doit pas causer dinterfrences;et

(2) ce dispositif doit accepter toute interfrence, y compris toute interfrence susceptible de provoquer un fonctionnement indsirable du dispositif. 6.Lquipement est conforme aux limites dexposition aux rayonnements isee tablies par Innovation, Science et dveloppement conomique Canada pour un environnement non contrl.

Head Unit

Model 2415723

Input:

USB Output 5V 2.1A Max

:

12V 20A

:

-Harman International Industries, Inc. 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES.

-European Representative: Harman International Industries, Incorporated

-EMEA Liaison Office, Herikerbergweg 9,1101 CN Amsterdam, The Netherlands.

Made in China/Fabriqué en China

FCC ID:APIHEADUNITAL IC: 6132A-HEADUNITAL

This device complies with Part 15 of the FCC rules and

Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

-This device may not cause harmful interference

-This device must accept any interference received,

including interference that may cause undesired

operation.

CAN ICES-3(B)/NMB-3(B)

Remarks:

1.Set sticker is divided into two stickers.

-The size of each one is 80x25mm.

-Print black on the white background.

2.The two stickers are pasted on lateral

areas of bottom shell respectively.

CONFIDENTIALITY REQUEST

for Certification Service in USA

Federal Communication Commission

Equipment Authorization Division, Application Processing Branch

7435 Oakland Mills Road

Columbia, MD 21048

<07/14/2021>

TO WHOM IT MAY CONCERN

Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and

Section §552(b) (4) of the Freedom of Information Act, we request confidentiality for the

following products:

FCC ID: APIHEADUNITAL

For the product stated above, we request that the following information be held

confidential;

Model name: Head Unit

Exhibits

Long-Term

Confidentiality

Short-Term

Confidentiality

Short-Term

Confidentiality Days

180 days

180 days

180 days

180 days

External Photos

Internal Photos

Block Diagram

Schematics

Test Setup Photos

User’s Manual

Parts List

Operational Descriptions

The long-term confidentiality exhibits contain our trade secrets and proprietary

information that could be of benefit to our competitors.

The short-term confidentiality on the basis of ensuring that business sensitive

information remains confidential until the actual marketing of our new device.

If you have any questions, please feel free to contact me at the address shown below.

Sincerely,

(Signed)

Name: Terry Shi

Company: Harman International Industries, Inc

Address: 8500 Balboa Boulevard, Northridge, CA 91329, UNITED STATES

Phone: 86-75523189391

Fax: 818-892-0325

E-Mail: terry.shi@harman.com