all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual-ACV-2100 | Users Manual | 3.43 MiB | March 09 2018 | |||
1 2 |
|
User Manual-ACV-5100 | Users Manual | 3.31 MiB | March 09 2018 | |||
1 2 |
|
User Manual-Safety Instruction | Users Manual | 789.72 KiB | March 09 2018 | |||
1 2 | Cover Letter(s) | March 09 2018 | ||||||
1 2 | External Photos | March 09 2018 | ||||||
1 2 | Cover Letter(s) | March 09 2018 | ||||||
1 2 | Internal Photos | March 09 2018 | ||||||
1 2 | Cover Letter(s) | March 09 2018 | ||||||
1 2 | ID Label/Location Info | March 09 2018 | ||||||
1 2 | ID Label/Location Info | March 09 2018 | ||||||
1 2 | RF Exposure Info | March 09 2018 | ||||||
1 2 | Test Report | March 09 2018 | ||||||
1 2 | Test Setup Photos | March 09 2018 |
1 2 | User Manual-ACV-2100 | Users Manual | 3.43 MiB | March 09 2018 |
QUICK START GUIDE ACV-2100 Acendo Vibe Conferencing Sound Bar Overview The ACV-2100 features a connector bay door that also serves as a hinged Wall Mount Bracket, which allows easy access to the Connector Bay without having to dismount the unit. The Wall Mount Bracket features a cutout for cable routing and straps for cable management. Side Panel Keypad Front Rear Cable Pass-Thru Wall Mount Bracket 2. Rubber feet (removable, x2) mounting holes (x4) FIG. 1 ACV-2100 (FRONT/REAR VIEWS) PRODUCT SPECIFICATIONS MODELS AVAILABLE INCLUDED ACCESSORIES DIMENSIONS (HWD) WEIGHT ACTIVE POWER REQUIREMENTS REGULATORY COMPLIANCE ENVIRONMENTAL OPTIONAL ACCESSORIES 5mm Wall Mount Spacers (4) Lock-Down Screws (2)
/ 4A.Power Supply ACV-2100GR, Grey (FG4121-00GR) ACV-2100BL, Black (FG4121-00BL) 15V Remote Control 6' USB 2.0 Cable 3" x 23 1/2" x 3 15/16" (76 mm x 590 mm x 100 mm) Depth with optional wall mount spacers: 4 1/8" (105 mm) 6.3 lbs (2.86 kg) FCC 47 CFR Part 15, Subpart C / Subpart A (emissions) EN 55024, EN 60950-1, IEC/EN/UL 60065:2014 Temperature (Operating): 32 F to 113 F (0 C to 45 C) Temperature (Storage): -4 F to 158 F (-20 C to 70 C) Humidity (Operating): 5% to 85% RH non-condensing CBL-USB-FL2-16, USB 2.0 16ft Extension Cable (FG10-2220-16) CBL-USB-FL2-33, USB 2.0 33ft Extension Cable (FG10-2220-33) ACR-5100, Meeting Collaboration System (FG4051-00)
~100-240V, 1.3A max Only use the included power supply Credenza Installation Note: To ensure highest possible sound quality, the rubber feet on the bottom panel must remain in place for surface-mount installations. The ACV-2100 can sit on a hard, flat surface such as a credenza, tabletop or desk. When choosing a surface location, consider a space that will not interfere with workspaces or other installed devices. Connect cables as necessary - see the Connections section for details. Wall Mount Installation For best aesthetic in wall mount installations, remove the rubber feet from the bottom panel: carefully peel each foot off of the bottom surface. Removing the Wall Mount Bracket 1. 2. Open the Wall Mount Bracket (held closed by internal magnets). Release Button to slide the Wall Mount Bracket out (over the Press and hold the button) to disengage the pins on the bracket from the hinges on the unit (FIG. 2). Bracket/Door Hinges/Pins Release Button Connector Bay Mounting the Wall Mount Bracket and Attaching the ACV-2100 1. Use the Wall Mount Bracket as a template to mark the locations for the
(4) mounting screws (not included). Use mounting screws and hardware appropriate for the surface being utilized to secure the Bracket to the wall. Optionally, place the four included Wall Mount Spacers between the Bracket/
Door and the wall to create a 5mm gap for routing flat cables if not hiding them behind the drywall (see FIG. 6). Attach the ACV-2100 to the Bracket/Door by sliding the pins on the Bracket into the hinges on the rear of the main unit (see FIG. 3):
a. Position the ACV-2100 with the bottom panel facing the wall and align the hinges on the main unit with the pins on the Bracket. Carefully slide the pins into the hinges, until the Bracket/door snaps into place. Note: Press the door into place so that the last pin depresses the Release Button, allowing the pins to slide into the hinges (see FIG. 3). With the ACV-2100 attached to the Bracket/door, rotate the unit up to its seated position. Note that the door snaps shut and is held closed via internal magnets. Note: Ensure that cables do not obstruct the complete closing of the unit. b. c. mounting spacers
(x4, optional) Note: Use M4 or #8 mounting screws Cable Pass-Thru a Mount the Bracket to the wall via 4 mounting screws mounting screws
(x4, not included) b Attach the ACV-2100 to the Bracket via hinges & pins FIG. 4 WALL MOUNTING THE ACV-2100 3. Connect cables as necessary - open the Wall Mount Bracket to access the connector bay (see FIG. 2). Rotate the ACV-2100 into seated position. The Wall Mount Bracket is secured with magnets (see FIG. 6). 4. Connections All cable connectors are located within the Connector Bay (rear panel). For surface installations, place the unit face-down and open the Connector Bay Door to manage cables/connectors. For wall-mounted installations, simply rotate the ACV-2100 unit down and away from the wall to access the Connector Bay. There are two sets of connectors on the inner side panels of the Connector Bay. Each connector is labeled on the elastic cable straps (FIG. 5):
FIG. 2 ACV-2100 BOTTOM VIEW - OPENING THE WALL MOUNT BRACKET 3. Lift the Wall Mount Bracket off of the hinges to remove (FIG. 3):
parts elbac Slide pins in to install Slide pins out to remove DC Power input Optical audio input Analog audio output Analog audio input parts elbac Bracket/Door Pins (x4) Hinges (x4) FIG. 3 ACV-2100 BOTTOM VIEW - REMOVING THE WALL MOUNT BRACKET FIG. 5 ACV-2100 CONNECTOR BAY Run each cable through the cable pass-thru in the bracket/door and under the cable straps. Release Button RS-232 (3-pin captive wire) USB (Type B) ACV-2100 CONNECTIONS DC POWER Connect the included 15V power supply included with the ACV-2100. power supply to this barrel connector. Only use the OPTICAL AUDIO Use this TOSLINK connector to receive Optical Stereo Input from an audio source AUX OUT AUX IN USB RS-232 device. Use this 1/8" mini-stereo connector to send analog stereo sound from the ACV-
2100 to an auxiliary device. Use this 1/8" mini-stereo connector to receive analog stereo sound from an analog audio source device. Use the USB 2.0 Type-B port to connect a PC/laptop to the ACV-2100 as a source device. Acendo Vibe is plug-and-play with PC/laptop using a standard UAC driver. The USB connection is also used to configure the ACV-2100 via the Acendo Vibe Configuration Tool for settings and firmware updates. 3-pin captive-wire connector provides serial communication with the Acendo Vibe. Refer to the Acendo Vibe Instruction Manual for serial command definitions. Volume and Mute Controls The ACV-2100 features Sound by JBL, including a 10W/channel stereo amplifier, speakers, microphones, and DSP algorithms with AEC. Volume Up/Down buttons on either the ACV-2100 side panel or on the Use the remote control to adjust speaker volume. Use the speakers and microphone. Note that these buttons are lit on the ACV-2100 (and flash on the remote control) to indicate that the sound functions are muted. Mute Speaker and Mute Microphone buttons to enable/disable the Remote Control The ACV-2100 includes a wireless remote control(FIG. 9):
Rotating the ACV-2100 Into the Seated Position After connecting all cables, close the Bracket to return the ACV-2100 to its seated position. The Bracket is secured via internal magnets (FIG. 6):
Mute Speaker End Call
+
Rotate the ACV-2100 into seated position
(Bracket is secured with magnets) FIG. 9 ACENDO VIBE REMOTE CONTROL Bluetooth Pairing
(press to pair remote to user device) Source Select button
(on back side) Mute Microphone
-
Volume Up/Down
(rotate ring to adjust) Battery Compartment (bottom panel) unlock & twist to open front nepo desolc FIG. 6 ROTATING THE ACV-2100 INTO ITS SEATED POSITION Installing Lock-Down Screws The ACV-2100 comes with two (flat-head) Lock-Down Screws that can be added after the ACV-2100 has been installed and connected. The Lock-Down Screws prevent the Bracket from being opened accidentally. With the Bracket/Connector Bay Door closed, install the Lock-Down Screws in the bottom panel (FIG. 7):
2. Lock-Down Screws FIG. 7 ACV-2100 BOTTOM VIEW - LOCK DOWN SCREW LOCATIONS Note: The Lock Down screws are not to be used to mount the ACV-2100 unit to the wall. Side Panel Keypad All controls and LEDs are on the left side panel of the ACV-2100 (FIG. 8):
Mute Speaker Mute Microphone Active Audio Source
(indicates the current selection Audio Source Select
(press to cycle through the source options) FIG. 8 ACV-2100 LEFT SIDE PANEL KEYPAD Volume Up/Down Bluetooth Pairing Pairing the Remote Control to the Acendo Vibe 1. Source Select and Bluetooth Pairing buttons on the Press and hold both the remote control for 5 seconds (see FIG. 9). All LEDS on the remote control should start blinking or remain blinking about once per second. Press and hold both the ACV-2100 (see FIG. 8). After 3-5 seconds the LEDS on the remote control should stop flashing to indicate the remote control has paired. Source Select and Bluetooth Pairing buttons on the 2. Note: If the remote control remains in pairing mode (all LEDS blinking) for longer than 60 seconds the remote control will go to sleep. Press any button on the remote control to wake it up and continue with step 2. Pairing the Acendo Vibe with a Bluetooth Source Device 1. Bluetooth Pairing button on the ACV-2100 or the remote control to Press the initiate pairing (see FIG. 8). The Bluetooth button will flash on both the ACV-2100 and the remote control. Note: To exit pairing mode without pairing a device, press either Bluetooth button again for 5 seconds. On the source device, verify that Bluetooth pairing is enabled, and look for
"Acendo Vibe" (or custom discoverable name) as a found device. Select the Acendo Vibe device for pairing. The Bluetooth LED on the ACV-2100 side panel lights solid to indicate that the Bluetooth device is paired. If automatic switching is disabled, use the Source Select button on the ACV-2100 to select Bluetooth as the audio source (if necessary). At this point, the Bluetooth LED is lit solid, Bluetooth audio is sent to the ACV-2100 speakers, and microphone audio is sent to the paired Bluetooth device. Note: Once the ACV-2100 has paired to a device, it must either be "removed" or
"forgotten" from your device's Bluetooth pairing list before it can be paired again. Acendo Vibe Configuration Tool The ACV-2100 is configured via the Acendo Vibe Configuration Tool software
(available to download from AMX). In most cases the default settings should not require adjustment. For details, see the Acendo Vibe Instruction Manual, available to view or download from www.amx.com. Setup Mode In order for the Acendo Vibe Configuration Tool to communicate with the ACV-2100, the unit must be in Setup Mode. To place the ACV-2100 in Setup Mode, press the Audio Source Select and Mic Mute keys on the ACV-2100 (see FIG. 8) simultaneously for 3 seconds. All of the LEDs blink to indicate that the unit is in Setup Mode. Note: Press and hold the Audio Source Select and Mic Mute buttons for 3 seconds to exit Setup mode. Additional Documentation For instructions on configuring the Acendo Vibe via the Acendo Vibe Configuration Tool, as well as file transfer, firmware updates, programming and troubleshooting info, see the Acendo Vibe Instruction Manual, available to view or download from www.amx.com. Refer to AMX University for online videos that demonstrate many of the installation steps described in this Quick Start Guide. 2018 Harman. All rights reserved. Modero, AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies. AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time. The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153 AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom +44 1904-343-100 www.amx.com/eu/
REV: A Last Revised: 1/18/2018 ACV-2100 ,
, . 1 ACV-2100 (/) 2.
( , 2)
(4) b. c.
(HWD) 5mm (4)
(2)
/ 4A. ACV-2100GR, (FG4121-00GR) ACV-2100BL, (FG4121-00BL) 15V 6' USB 2.0 3" x 23 1/2" x 3 15/16" (76 mm x 590 mm x 100 mm)
() : 4 1/8" (105 mm) 6.3 lbs (2.86 kg) FCC 47 CFR 15, C / A () EN 55024, EN 60950-1, IEC/EN/UL 60065:2014
(): 32
(): -4
(): 5% ~ 85% RH CBL-USB-FL2-16, USB 2.0 16ft (FG10-2220-16) CBL-USB-FL2-33, USB 2.0 33ft (FG10-2220-33) ACR-5100, (FG4051-00)
~100-240V, 1.3A
. F ~ 113 F (0 C ~ 45 C) F ~ 158 F (-20 C ~ 70 C)
(A) ,
.
:
. ACV-2100 , . "" . 1. 2.
( )
""
( 2).
( )
/
ACV-2100 ( ) ACV-2100 1. 4 () .
, 4 5mm (
6 ). ACV-2100
( 3 ):
a. ACV-2100
.
:
( 3 ). ACV-2100 .
:
.
(4, )
: M4 #8
. a 4
(x4, ) b ACV-2100
( - 2 ). ACV-2100 . ( 6). 4 ACV-2100 3. 4.
()
/
. ACV-2100
. 2 . 2 ACV-2100 -
3.
( 3):
.
(4)
(4) 3 ACV-2100 -
USB( B) RS-232 (3 )
. 5 ACV-2100
/ . ACV-2100 DC 15V
. ACV-2100 TOSLINK . AUX OUT AUX IN USB RS-232 1/8" ACV-2100
. 1/8"
. USB 2.0 -B PC/ ACV-2100 . UAC PC/
. USB ACV-2100 . 3 - . ACV-2100 ACV-2100 .
( 6). ACV-2100
( ). 9 6 ACV-2100 2. ACV-2100 2 () ACV-2100
. . /
( 8):
ACV-2100 10W/ , , AEC DSP JBL . ACV-2100
.
/. ACV-
2100 ( )
.
" +/-"
ACV-2100 ( 9):
( )
()
+
-
+/-
( )
( ) 1.
" " " " 5 ( 9 ). LED ( 1). ACV-2100 3-5 , LED .
" " " " ( 9 ). 2.
: 60 ( LED )
. 2 . 1.
( 8
). ACV-2100 .
: 5
.
"
" ( ) . ACV-2100 LED
. ACV-2100 " "
( ). LED ACV-2100
. 7 ACV-2100 -
: ACV-2100 . LED ACV-2100 ( 8):
( )
(
)
. 8 ACV-2100
+/-
: ACV-2100 ""
. ACV-2100 (AMX
). . www.amx.com
. ACV-2100 . ACV-
2100 " " " "
3 ( 9 ). LED .
: " " " " 3 .
, , , ,
. www.amx.com
. AMX
. 2018 . . Modero, AMX, AV FOR AN IT WORLD, HARMAN . ,
/. AMX . . AMX www.amx.com . 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153 AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom +44 1904-343-100 www.amx.com/eu/ : A
: 2018 1 18 ACV-2100 ACV-2100 1. ACV-2100 Acendo Vibe 2. 2 4 c. 1 ACV-2100/
4 /
5mm 6
/ 3 ACV-2100 a. b. ACV-2100
/
3 ACV-2100 /
4 M4 8 a 4 4 b ACV-2100 5mm 4 2
/ 4A ACV-2100GR (FG4121-00GR) ACV-2100BL (FG4121-00BL) 15V 6' USB 2.0 3" x 23 1/2" x 3 15/16" (76 mm x 590 mm x 100 mm) 4 1/8" (105 mm) 6.3 lbs (2.86 kg) FCC 47 CFR 15 C/ A EN 55024, EN 60950-1, IEC/EN/UL 60065:2014 32
-4 5% 85%
CBL-USB-FL2-16USB 2.0 16ft (FG10-2220-16) CBL-USB-FL2-33USB 2.0 33ft (FG10-2220-33) ACR-5100 (FG4051-00) F 113F0C 45C F 158F-20C 70C 100-240V 1.3A ACV-2100
-
4 ACV-2100 3. 4.
- 2 ACV-2100 6 1. 2. 2
/
/
/
ACV-2100 5 2 ACV-2100 -
3. 3
/
4 4 3 ACV-2100 -
RS-2323 USBB 5 ACV-2100
/
ACV-2100 DC POWER OPTICAL AUDIO AUX OUT AUX IN USB RS-232 15V ACV-2100 TOSLINK 1/8" ACV-2100 1/8"
USB 2.0 Type-B PC/ ACV-2100 UAC Acendo Vibe PC/
USB Acendo Vibe ACV-2100 3 Acendo Vibe Acendo Vibe ACV-2100 JBL 10W/
AEC DSP
/
/
ACV-2100 ACV-2100 ACV-2100 9 ACV-2100 ACV-2100 6 ACV-2100
+
-
/
9 ACENDO VIBE Acendo Vibe 1. 5 9 LED 6 ACV-2100 ACV-2100 ACV-2100
/ 7 7 ACV-2100 -
ACV-2100 LED ACV-2100 8 2. ACV-2100 83-5 LED 60 2 Acendo Vibe 1. 8ACV-2100 ACV-2100 2. 5
"Acendo Vibe"
Acendo Vibe ACV-2100 LED ACV-2100 LED ACV-2100 ACV-2100 Acendo Vibe ACV-2100 Acendo Vibe AMX www.amx.com Acendo Vibe 8 ACV-2100
/
Acendo Vibe ACV-2100 ACV-2100 ACV-2100 83 LED 3 Acendo Vibe Acendo Vibe www.amx.com Acendo Vibe AMX University 2018 HarmanMetreauAMXAV IT FOR IT WORLDOracleJava
/
AMX AMX www.amx.com AMX 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | 469.624.7153 AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom +44 1904-343-100 www.amx.com/eu/
A 1/18/2018
1 2 | User Manual-ACV-5100 | Users Manual | 3.31 MiB | March 09 2018 |
QUICK START GUIDE ACV-5100 Acendo Vibe Conferencing Sound Bar with Camera Overview The ACV-5100 features a hinged Wall Mount Bracket, which allows easy installation as well as access to the Connector Bay without having to dismount the unit. The Wall Mount Bracket features a cutout for cable routing and straps for cable management. Camera Side Panel Keypad Front Rear Cable Pass-Thru Wall Mount Bracket Rubber feet (removable, x2) mounting holes (x4) FIG. 1 ACV-5100 (FRONT/REAR VIEWS) PRODUCT SPECIFICATIONS MODELS AVAILABLE INCLUDED ACCESSORIES DIMENSIONS (HWD) WEIGHT ACTIVE POWER REQUIREMENTS REGULATORY COMPLIANCE ENVIRONMENTAL OPTIONAL ACCESSORIES 5mm Wall Mount Spacers (4) Lock-Down Screws (2)
/ 4A.Power Supply ACV-5100GR, Grey (FG4151-00GR) ACV-5100BL, Black (FG4151-00BL) 15V Remote Control 6' USB 2.0 Cable 5" x 23 1/2" x 3 15/16" (127 mm x 590 mm x 100 mm) Depth with optional wall mount spacers: 4 1/8" (105 mm) 6.45 lbs (2.93 kg) FCC 47 CFR Part 15, Subpart C / Subpart A (emissions) EN 55024, EN 60950-1, IEC/EN/UL 60065:2014 Temperature (Operating): 32 F to 113 F (0 C to 45 C) Temperature (Storage): -4 F to 158 F (-20 C to 70 C) Humidity (Operating): 5% to 85% RH non-condensing CBL-USB-FL2-16, USB 2.0 16ft Extension Cable (FG10-2220-16) CBL-USB-FL2-33, USB 2.0 33ft Extension Cable (FG10-2220-33) ACR-5100, Meeting Collaboration System (FG4051-00)
~100-240V, 1.3A max Only use the included power supply Note: Do not lift the ACV-5100 by the camera or rest the unit on the camera. Credenza Installation Note: To ensure highest possible sound quality, the rubber feet on the bottom panel must remain in place for surface-mount installations. The ACV-5100 can sit on a hard, flat surface such as a credenza, tabletop or desk. When choosing a surface location, consider a space that will not interfere with workspaces or other installed devices. Connect cables as necessary - see the Connections section for details. Wall Mount Installation For best aesthetic in wall mount installations, remove the rubber feet from the bottom panel: carefully peel each foot off of the bottom surface. Removing the Wall Mount Bracket 1. 2. Open the Wall Mount Bracket (held closed by internal magnets). Press and hold the disengage the pins on the Bracket from the hinges on the unit (FIG. 2). Release Button to slide the Bracket out (over the button) to Wall Mount Bracket Hinges/Pins Release Button Connector Bay Wall Mount Considerations Distance between conference table and display:
The closer the table is to the wall-mounted display. the lower the display should be mounted. As a general guide, the display should be mounted between 40" and 48" from the floor. Avoid obstructing the camera view:
If the display protrudes from the wall more than the ACV-5100, then additional spacing between the display and the ACV-
5100 may be needed. Position camera for full visibility:
manuallytilt the camera up to maximize visibility for all participants. In small rooms, it may be necessary to Display 40-48" from floor ACV-5100 Camera
(side view) Display Camera lens should be positioned beyond the display to avoid obstructing the view front FIG. 4 ACV-5100 WALL MOUNT CONSIDERATIONS Using the Bracket Mounting Guide The Wall Mount Bracket features instructions etched on the inner surface that describe how to position the ACV-5100 beneath a wall-mounted display to avoid obstructing the camera view (FIG. 5):
Display ACV-5100 Mounting Bracket
(top view) Mounting Guide
(etched into surface) FIG. 5 USING THE MOUNTING GUIDE 1. 2. Remove the Bracket from the ACV-5100 (see FIG. 7 on page 9). Turn the Bracket vertically and place against the wall, centered directly beneath the wall-mounted display. Align the top of the Bracket (see the display. Use the top edge of the notch in the Bracket (see Vibe to determine the closest placement for the ACV-5100 beneath the display. Mark the mounting surface. Align the top flat surface of the ACV-5100 with the mark made in step 4. Mount the Bracket using mounting screws and optional mounting spacers (see FIG. 6). Bottom of Display) with the bottom surface of Top flat surface of Acendo 3. 4. 5. 6. Mounting the Wall Mount Bracket and Attaching the ACV-5100 1. Use the Wall Mount Bracket as a template to mark the locations for the four mounting screws (not included). Use mounting screws and hardware appropriate for the surface being utilized to secure the Bracket to the wall. Optionally, if not hiding them behind the drywall, place the four included Wall Mount Spacers between the Bracket and the wall to create a 5mm gap for routing flat cables (see FIG. 6). a Mount the Bracket to the wall via 4 mounting screws mounting spacers (x4, optional) mounting screws
(x4, not included) Cable Pass-Thru Note: Use M4 or #8 mounting screws FIG. 2 ACV-5100 BOTTOM VIEW - OPENING THE WALL MOUNT BRACKET 3. Lift the Wall Mount Bracket off of the hinges to remove (FIG. 3):
Slide pins in to install Slide pins out to remove b Attach the ACV-5100 to the Bracket via hinges & pins Wall Mount Bracket Pins (x4) Hinges (x4) FIG. 3 ACV-5100 BOTTOM VIEW - REMOVING THE BRACKET Release Button b. c. FIG. 6 WALL MOUNTING THE ACV-5100 2. Attach the ACV-5100 to the Bracket by sliding the pins on the Bracket into the hinges on the rear of the main unit (see FIG. 3):
a. Position the ACV-5100 with the bottom panel facing the wall and align the hinges on the main unit with the pins on the Bracket. Carefully slide the pins into the hinges, until the Bracket snaps into place. Note: Press the Bracket into place so that the last pin depresses the Release Button, allowing the pins to slide into the hinges (see FIG. 3) With the ACV-5100 attached to the Bracket, rotate the unit up to its seated position. Note that the Bracket snaps shut and is held closed via internal magnets. Note: Ensure that cables do not obstruct the complete closing of the unit. 3. 4. Connect cables as necessary (inside the Connector Bay - see FIG. 2). Rotate the ACV-5100 into seated position. The Bracket is secured with magnets
(FIG. 7). Connections All connectors are located within the Connector Bay (rear panel). For surface installations, place the unit face-down and open the Connector Bay Door to manage cables/connectors. For wall-mounted installations, simply rotate the ACV-5100 unit down and away from the wall to access the Connector Bay. There are two sets of connectors on the inner side panels of the Connector Bay. Each connector is labeled on the elastic cable straps. Run each cable through the cable pass-thru in the bracket/door and under the cable straps. ACV-5100 CONNECTIONS DC POWER Connect the included 15V power supply included with the ACV-5100. power supply to this barrel connector. Only use the OPTICAL AUDIO Use this TOSLINK connector to receive Optical Stereo Input from an audio source AUX OUT AUX IN HDMI OUT HDMI IN USB RS-232 MOTION
(future firmware update) device. Use this 1/8" mini-stereo connector to send analog stereo sound from the ACV-
5100 to an auxiliary device. Use this 1/8" mini-stereo connector to receive analog stereo sound from an analog audio source device.
(Type A) Connect to an HDMI input on a display device.
(Type A) Connect to an HDMI output from a source device, such as a laptop or Acendo Core. Use the USB 2.0 Type-B port to connect a PC/laptop to the ACV-5100 as a source device. Acendo Vibe is plug-and-play with PC/laptop using standard UAC/UVC drivers. The USB connection is also used to configure the ACV-5100 via the Acendo Vibe Configuration Tool for settings and firmware updates. 3-pin captive-wire connector provides serial communication with the Acendo Vibe. Refer to the Acendo Vibe Instruction Manual for serial command definitions. 3-pin captive-wire connector provides connectivity for an (optional) motion sensor (reserved for future implementation). The logic of OCC is "High" for occupancy detected, and "Low" for vacancy. PWR (+5V OCC Ground 0.1A) Rotating the ACV-5100 Into the Seated Position After connecting all cables, close the Bracket to return the ACV-5100 to its seated position. The Bracket is secured via internal magnets (FIG. 7):
Rotate the ACV-5100 into seated position
(Bracket is secured with magnets) open closed front FIG. 7 ROTATING THE ACV-5100 INTO ITS SEATED POSITION Installing Lock-Down Screws The ACV-5100 comes with two (flat-head) Lock-Down Screws that can be added after the ACV-5100 has been installed and connected. The Lock-Down Screws prevent the Bracket from being opened accidentally. With the Bracket/Connector Bay Door closed, install the Lock-Down Screws in the bottom panel (FIG. 8):
2. Lock-Down Screws FIG. 8 ACV-5100 BOTTOM VIEW - LOCK DOWN SCREW LOCATIONS Note: The Lock Down screws are not to be used to mount the ACV-5100 unit to the wall. Side Panel Keypad All controls and LEDs are on the left side panel of the ACV-5100 (FIG. 9):
Mute Speaker Mute Microphone Active Audio Source
(indicates the current selection Audio Source Select
(press to cycle through the source options) FIG. 9 ACV-5100 LEFT SIDE PANEL KEYPAD Volume Up/Down Bluetooth Pairing Volume and Mute Controls The ACV-5100 features Sound by JBL, including a 10W/channel stereo amplifier, speakers, microphones, and DSP algorithms with AEC Volume Up/Down buttons on either the ACV-5100 side panel or on the Use the remote control to adjust speaker volume. Mute Speaker microphone. Note that these buttons are lit on the ACV-5100 (and flash on the remote control) to indicate that the sound functions are muted. and Mute Microphone enable/disable the speakers and Connect the ACV-5100 to a laptop/PC via USB. Use Source Select button on the the ACV-5100 (FIG. 9) to select Select Select Select Camera The ACV-5100 is equipped with a wide-angle camera for videoconferencing and supports a wide range of web conferencing applications via USB. To configure your USB device, such as a laptop, to work with the ACV-5100:
1. 2. 3. 4. 5. Note: To adjust the camera's view, simply grasp the camera and rotate to the desired position. Remote Control The ACV-5100 includes a wireless remote control (FIG. 10):
AMX Acendo Vibe as the camera. AMX Acendo Vibe as the microphone. USB AUDIO CODEC as the speakers. USB (if necessary). Mute Speaker End Call
+
Bluetooth Pairing
(press to pair remote to user device) Source Select pushbutton
(on back side) Mute Microphone
-
Volume Up/Down
(rotate ring to adjust) Battery Compartment (bottom panel) Unlock & twist to open FIG. 10 ACENDO VIBE REMOTE CONTROL Pairing the Remote Control to the Acendo Vibe 1. 2. Source Select and Bluetooth Pairing buttons on the Press and hold both the remote control for 5 seconds (see FIG. 10). All LEDS on the remote control should start blinking or remain blinking (once per second). Press and hold both the ACV-5100 (see FIG. 9). After 3-5 seconds the LEDS on the remote control should stop flashing to indicate the remote control has paired. Source Select and Bluetooth Pairing buttons on the Note: If the remote control remains in pairing mode (all LEDS blinking) for longer than 60 seconds the remote control will go to sleep. Press any button on the remote control to wake it up and continue with step 2. Pairing the Acendo Vibe with a Bluetooth Source Device 1. Bluetooth Pairing button on the Acendo Vibe or the remote control to Press the initiate pairing (see FIG. 9).The Bluetooth button will flash on both the ACV-5100 and the remote control. Note: To exit pairing mode without pairing a device, press either Bluetooth button again for 5 seconds. On the source device, verify that Bluetooth pairing is enabled, and look for
"Acendo Vibe" (or custom discoverable name) as a found device. Select the Acendo Vibe device for pairing. The Bluetooth LED on the ACV-5100 side panel lights solid to indicate that the Bluetooth device is paired. If automatic switching is disabled, use the Source Select button on the ACV-5100 to select Bluetooth as the audio source (if necessary). At this point, the Bluetooth LED is lit solid, Bluetooth audio is sent to the ACV-5100 speakers, and microphone audio is sent to the paired Bluetooth device. Note: Once the ACV-5100 has paired to a device, it must either be "removed" or
"forgotten" from your device's Bluetooth pairing list before it can be paired again. Acendo Vibe Configuration Tool The ACV-5100 is configured via the Acendo Vibe Configuration Tool software
(available to download from AMX). In most cases the default settings should not require adjustment. For details, see the Acendo Vibe Instruction Manual, available to view or download from www.amx.com. Setup Mode In order for the Acendo Vibe Configuration Tool to communicate with the ACV-5100, the unit must be in Setup Mode. To place the ACV-5100 in Setup Mode, press the Audio Source Select and Mic Mute buttons on the ACV-5100 simultaneously (see FIG. 9) for 3 seconds. All of the LEDs blink to indicate that the unit is in Setup Mode. Note: Press and hold the Audio Source Select and Mic Mute buttons for 3 seconds to exit Setup mode. Additional Documentation For instructions on configuring the Acendo Vibe, file transfers, firmware updates, programming and troubleshooting info, see the Acendo Vibe Instruction Manual, available to view or download from www.amx.com. Refer to AMX University for online videos that demonstrate many of the installation steps described in this Quick Start Guide. 2018 Harman. All rights reserved. Modero, AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies. AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time. The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153 AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom +44 1904-343-100 www.amx.com/eu/
REV: A Last Revised: 1/19/2018 ACV-5100 ( , ) ACV-5100 ,
, . 1 ACV-5100 (/)
( , 2)
(4)
(HWD) FCC 5mm (4)
(2)
/ 4A. ACV-5100GR, (FG4151-00GR) ACV-5100BL, (FG4151-00BL) 15V 6' USB 2.0 5" x 23 1/2" x 3 15/16" (127 mm x 590 mm x 100 mm)
() : 4 1/8" (105 mm) 6.45 lbs (2.93 kg) 47 CFR 15, C / A () EN 55024, EN 60950-1, IEC/EN/UL 60065:2014
(): 32
(): -4
(): 5% ~ 85% RH CBL-USB-FL2-16, USB 2.0 16ft (FG10-2220-16) CBL-USB-FL2-33, USB 2.0 33ft (FG10-2220-33) ACR-5100, (FG4051-00)
~100-240V, 1.3A
. F ~ 113 F (0 C ~ 45 C) F ~ 158 F (-20 C ~ 70 C)
: ACV-5100 .
(A)
, .
:
. ACV-5100 ,
. "" . 1. 2. " ( )
( )
"
( 2).
/
2 ACV-5100 -
3.
( 3):
.
(4)
(4) 3 ACV-5100 -
b. c.
:
. 40" ~ 48"
.
:
ACV-5100 .
:
. ACV-5100 Display ACV-5100
() 40-48"
. 4 ACV-5100 ACV-5100 (FIG. 5):
Display ACV-5100
()
( ) 5 1. 2. 3. 4.
(9 7 ). ACV-5100
.
(
(notch) (
) ACV-5100 . ACV-5100 4 .
( 6 ).
). 5. 6. ACV-5100 1. 4 () .
, 4 5mm (
6 ). a 4
(4, )
(x4, )
: M4 #8
. b ACV-5100 6 ACV-5100 2.
( 3 ):
a. ACV-5100 ACV-5100
.
:
( 3 ). ACV-5100 .
: .
( - 2 ). ACV-5100 . ( 7). 3. 4.
()
/
. ACV-5100
. 2 . /
. ACV-5100 DC AUX OUT AUX IN
. ACV-5100 15V
. TOSLINK . 1/8" ACV-5100
. 1/8"
. HDMI OUT ( A) HDMI . HDMI IN ( A) USB HDMI . USB 2.0 -B PC/ ACV-5100 . UAC/UVC PC/
. USB ACV-5100 . 3 - . 3 () .
( ) OCC "High", "Low". PWR (+5V OCC Ground 0.1A) RS-232
(
) ACV-5100 ACV-5100 .
( 7). ACV-5100
( ). 2. 7 ACV-5100 ACV-5100 2 () ACV-5100
. . /
( 8):
2. ACV-5100 10W/ , , AEC DSP JBL . ACV-5100
.
/. ACV-
5100 ( )
.
" +/-"
ACV-5100 , USB
. USB ACV-5100
:
1. 2. 3. 4. 5.
: . ACV-5100 ( 10):
ACV-5100 USB /PC . ACV-5100 " " ( 9) AMX . AMX . USB AUDIO CODEC . USB ( ).
+
( )
()
-
+/-
( )
( ) 10 1.
" " " " 5 ( 10 ). LED ( 1). ACV-5100 3-5 , LED .
" " " " ( 9 ).
: 60 ( LED )
. 2 . 1.
( 9
). ACV-5100 .
: 5
.
"
" ( ) . ACV-5100 LED
. ACV-5100 " "
( ). LED ACV-5100
. 8 ACV-5100 -
: ACV-5100 . LED ACV-5100 ( 9):
( )
(
) 9 ACV-5100
+/-
: ACV-5100 ""
. ACV-5100 (AMX
). . www.amx.com
. ACV-5100 . ACV-
5100 " " " "
3 ( 9 ). LED .
: " " " " 3 .
, , , ,
. www.amx.com
. AMX
. 2018 . . Modero, AMX, AV FOR AN IT WORLD, HARMAN . ,
/. AMX . . AMX www.amx.com . 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153 AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom | +44 1904-343-100 | www.amx.com/eu/
: A
: 2018 1 19 ACV-5100 ACENDO VIBETM 40" 48"
ACV-5100 ACV-5100 Display ACV-5100 40-48"
FIG. 4 ACV-5100
(FIG. 5) ACV-5100 Display ACV-5100 FIG. 5 1. 2. 3. 4. ACV-5100 FIG. 3
(Bottom of Display) Acendo Vibe) ACV-5100 ACV-5100 4 FIG. 6 Acendo Vibe (Top flat surface of 5. 6. ACV-5100 1. 4 5mm (FIG. 6) a 4 x4 x4 M4 #8 b ACV-5100 FIG. 6 ACV-5100 2. FIG. 3 ACV-5100 a. b. ACV-5100 ACV-5100 x2
(x4) 5mm (x4)
(x2)
/ 4A ACV-5100GR (FG4151-00GR) ACV-5100BL (FG4151-00BL) 15V 6' USB 2.0 5" x 23 1/2" x 3 15/16" (127 mm x 590 mm x 100 mm) 4 1/8" (105 mm) FIG. 1 ACV-5100/
ACV-5100 6.45 lbs (2.93 kg) FCC 47 CFR 15 C / A EN 55024EN 60950-1IEC/EN/UL 60065:2014 F 113F0C 45C F 158F-20C 70C 32
-4 5% 85%
CBL-USB-FL2-16USB 2.0 16ft (FG10-2220-16) CBL-USB-FL2-33USB 2.0 33ft (FG10-2220-33) ACR-5100 (FG4051-00)
~100-240V 1.3A ACV-5100 ACV-5100 1. 2.
(FIG. 2)
/
FIG. 2 ACV-5100 -
3.
(FIG. 3)
(x4)
(x4) FIG. 3 ACV-5100 -
FIG. 3) ACV-5100 ACV-5100 c. 3. 4.
- FIG. 2 ACV-5100 (FIG. 7) ACV-5100
(DC POWER) 15V
(OPTICAL AUDIO) TOSLINK
(AUX OUT)
(AUX IN) HDMI (HDMI OUT) HDMI (HDMI IN) USB 1/8" ACV-5100 1/8"
A HDMI A Acendo Core HDMI USB 2.0 B PC/ Acendo Vibe UAC/UVC Acendo Vibe PC/
Acendo Vibe USB Acendo Vibe 3 Acendo Vibe 3 PWR (+5V OCC OCC 0.1A) RS-232
(MOTION) ACV-5100 ACV-5100
(FIG. 7) ACV-5100 ACV-5100 JBL 10W/ AEC DSP
/
ACV-5100 USB USB ACV-5100 1. 2. 3. 4. 5. USB ACV-5100 /PC ACV-5100 AMX Acendo Vibe AMX Acendo Vibe USB AUDIO CODEC
(FIG. 9) USB ACV-5100 (FIG. 10)
+
-
/
+
FIG 10. Acendo Vibe ACV-5100 1. ACV-5100 2. 5 FIG. 10 LED FIG. 93-5 LED 60 2 FIG 7. ACV-5100 ACV-5100
(FIG. 8) FIG 8. ACV-5100 -
ACV-5100 LED ACV-5100 (FIG. 9) FIG 9. ACV-5100
/
ACV-5100 1. 2. FIG. 9ACV-5100 ACV-5100 ACV-5100 5
"Acendo Vibe"
Acendo Vibe ACV-5100 LED ACV-5100 LED ACV-5100 Acendo Vibe Acendo Vibe ACV-5100 Acendo Vibe AMX www.amx.com Acendo Vibe ACV-5100 ACV-5100 ACV-5100 FIG. 93 LED 3 Acendo Vibe Acendo Vibe www.amx.com AMX 2018 (HARMAN)ENZONetLinxAMXAV FOR AN IT WORLDHARMAN (HARMAN) OracleJava AMX AMX AMX www.amx.com 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153 AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom +44 1904-343-100 www.amx.com/eu/
REV: A 1/19/2018
1 2 | User Manual-Safety Instruction | Users Manual | 789.72 KiB | March 09 2018 |
IMPORTANT SAFETY NOTES / COMPLIANCE INFORMATION PRODUCTS COVERED:
ACV-5100 (Acendo Vibe conferencing Sound bAr with cAmerA) ACV-2100 (Acendo Vibe conferencing Sound bAr) ACV-REM-100 (Acendo Vibe remote control) 91 111 111 121 131 141 151 161 171 IMPORTANT SAFETY INSTRUCTIONS 11 21 31 41 51 61 71 81 READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. ONLY USE attachments/accessories specified by the manufacturer. UNPLUG this apparatus during lightning storms or when unused for long periods of time. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire. WARNING:
WARNING:
WARNING:
WARNING:
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing1 instructions in the literature accompanying the product. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge of static electricity from an outside source (such as human hands1 into an integrated circuit, often resulting in damage to the circuit. To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. No naked flame sources - such as lighted candles - should be placed on the product. Equipment shall be connected to a MAINS socket outlet with a protective earthing connection. This product is intended to be operated ONLY from the voltages listed on the back panel or the recommended, or included, power supply of the product. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a detachable power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are unsure of the correct operational voltage, please contact your local distributor and/or retailer. If the product is not equipped with a detachable power cord, use only the type provided, or specified, by the manufacturer or your local distributor. WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. Place the equipment near a main power supply outlet and make sure that you can easily access the power breaker switch. Warning: Batteries shall not be exposed to excess of heat such as sunshine, fire, etc. ESD WARNING WARNING: To avoid ESD (Electrostatic Discharge1 damage to sensitive components, make sure you are properly grounded before touching any internal materials. When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must be followed to make sure people, products, and tools are as free of static charges as possible. Grounding straps, conductive smocks, and conductive work mats are specifically designed for this purpose. Anyone performing field maintenance on AMX equipment should use an appropriate ESD field service kit complete with at least a dissipative work mat with a ground cord and a UL listed adjustable wrist strap with another ground cord FCC AND CANADA EMC COMPLIANCE INFORMATION:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (11 This device may not cause harmful interference, and (21 this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: This equipment is compliant with Class B of CISPR 32. In a residential environment this equipment may cause radio interference. WARNING: This product must not be used in residential areas. NOTE: For interference purposes, the residential and domestic environments are defined as an environment within 11meters of radio or broadcast receiving equipment or home use. CAN ICES-3 (B1/NMB-3(B1 Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance. CAUTION: Changes or modifications not expressly approved by the manufacturer could void the users authority to operate this device. WIRELESS TRANSMITTER COMPLIANCE INFORMATION:
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Le terme IC: avant le numro de certification radio signifie seulement que les spcifications techniques d'Industrie Canada ont t respectes. This device complies with part 15 of the FCC Rules and the applicable Industry Canada license-exempt RSS standard(s1. Operation is subject to the following two conditions : (11 this device may not cause harmful interference, and (21 this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (11 l'appareil ne doit pas produire de brouillage, et (21 l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 21cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme FCC et IC l'exposition aux rayonnements limites fixes pour un environnement non contrl. Cet appareil doit tre install et utilis avec une distance minimale de 21 cm entre le radiateur et votre corps. Cet transmetteur ne doit pas tre co-situ ou oprant en liaison avec toute autre antenne ou transmetteur. EU COMPLIANCE INFORMATION:
Hereby, AMX LLC declares that the equipment type ACV-5100GR / ACV-5100BL is in compliance with the following:
European Union Restriction of Hazardous Substances Recast (RoHS21 Directive 2111/65/EU; European Union WEEE (recast1 Directive 2112/19/EU; European Union Registration, Evaluation, Authorization and Restriction of Chemicals (REACH1 Directive 1917/2116 European Radio Equipment Directive (RED1 2114/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.amx.com/techcenter/
certifications.asp. This product contains batteries that are covered under the 2116/66/EC European Directive, which cannot be disposed of with normal household waste. Please follow local regulations. WIRELESS FREQUENCY RANGE AND WIRELESS OUTPUT POWER:
2412-2481 MHz 5.2 mW WEEE NOTICE:
This appliance is labeled in accordance with European Directive 2112/19/EU concerning waste of electrical and electronic equipment (WEEE1. This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. CONSIGNES DE SCURIT IMPORTANTES 11 21 31 41 51 61 71 81 LISEZ ces instructions. GARDEZ ces instructions. HEED tous les avertissements. SUIVRE toutes les instructions. NE PAS utiliser cet appareil prs de l'eau. NETTOYER UNIQUEMENT avec un chiffon sec. NE bloquez aucune bouche d'aration. Installez conformment aux instructions du fabricant. NE PAS installer proximit de sources de chaleur telles que des radiateurs, des bouches de chaleur, des poles ou tout autre appareil (y compris les amplificateurs) produisant de la chaleur. NE PAS vaincre l'objectif de scurit de la fiche polarise ou mise la terre. Une fiche polarise possde deux lames dont l'une est plus large que l'autre. Une fiche de type mise la terre comporte deux lames et une troisime broche de mise la terre. La lame la plus large ou la troisime broche sont fournies pour votre scurit. Si la fiche fournie ne rentre pas dans votre prise, consultez un lectricien pour le remplacement de la prise obsolte. PROTGEZ le cordon d'alimentation pour qu'il ne puisse pas marcher ou tre pinc, en particulier au niveau des fiches, des prises de courant et du point de sortie de l'appareil. UTILISER UNIQUEMENT les accessoires / accessoires spcifis par le fabricant. DBRANCHER cet appareil pendant les orages ou lorsqu'il n'est pas utilis pendant de longues priodes. RENVOYER tous les entretiens un personnel de service qualifi. L'entretien est ncessaire lorsque l'appareil a t endommag de quelque faon que ce soit, comme un cordon d'alimentation ou une prise endommage, du liquide a t renvers ou des objets sont tombs dans l'appareil, l'appareil a t expos la pluie ou l'humidit ou a t abandonn. NE PAS exposer cet appareil des gouttes ou des claboussures et s'assurer qu'aucun objet rempli de liquide, tel qu'un vase, n'est plac sur l'appareil. Pour dconnecter compltement cet appareil du secteur, dbranchez le cordon d'alimentation de la prise secteur. Lorsque la fiche d'alimentation ou un coupleur d'appareil est utilis comme dispositif de dconnexion, le dispositif de dconnexion doit rester facilement accessible. NE PAS surcharger les prises murales ou les rallonges au-del de leur capacit nominale, car cela pourrait provoquer un choc lectrique ou un incendie. 91 111 111 121 131 141 151 161 171 ATTENTION :
ATTENTION :
ATTENTION :
ATTENTION :
Le point d'exclamation, dans un triangle quilatral, est destin alerter l'utilisateur de la prsence d'instructions importantes d'utilisation et de maintenance (entretien1 dans la documentation accompagnant le produit. Le symbole de l'clair avec une flche dans un triangle quilatral est destin alerter l'utilisateur de la prsence d'une tension dangereuse non isole dans l'enceinte du produit qui peut tre suffisamment importante pour constituer un risque de choc lectrique pour les personnes. Avertissement d'ESD : L'icne gauche indique le texte concernant le danger potentiel associ la dcharge d'lectricit statique d'une source extrieure (telle que des mains humaines1 dans un circuit intgr, entranant souvent des dommages au circuit. Pour rduire le risque d'incendie ou d'lectrocution, n'exposez pas cet appareil la pluie ou l'humidit. Aucune source de flamme nue - telle que des bougies allumes - ne doit tre place sur le produit. L'quipement doit tre connect une prise secteur avec une connexion de mise la terre de protection. Ce produit est conu pour fonctionner UNIQUEMENT partir des tensions indiques sur le panneau arrire ou de l'alimentation lectrique recommande ou incluse du produit. Le fonctionnement partir d'autres tensions que celles indiques peut causer des dommages irrversibles au produit et annuler la garantie du produit. L'utilisation d'adaptateurs de prise CA est prvenue car elle peut permettre au produit d'tre branch sur des tensions dans lesquelles le produit n'a pas t conu pour fonctionner. Si le produit est quip d'un cordon d'alimentation dtachable, utilisez uniquement le type fourni avec votre produit ou par votre distributeur et / ou dtaillant local. Si vous n'tes pas sr de la tension de fonctionnement correcte, veuillez contacter votre distributeur local et / ou votre revendeur. Si le produit est quip d'un cordon d'alimentation dtachable, utilisez uniquement le type fourni ou spcifi par le fabricant ou votre distributeur local. ATTENTION : Ne pas ouvrir! Risque de choc lectrique. Les tensions dans cet quipement sont dangereuses pour la vie. Aucune pice rparable par l'utilisateur l'intrieur. Confiez toute rparation un technicien qualifi. Placez l'quipement prs d'une prise d'alimentation principale et assurez-vous que vous pouvez facilement accder l'interrupteur du disjoncteur d'alimentation. AVERTISSEMENT : Les batteries ne doivent pas tre exposes un excs de chaleur tel que le soleil, le feu, etc. AVERTISSEMENT ESD ATTENTION : Pour viter les dommages ESD (dcharge lectrostatique1 aux composants sensibles, assurez-vous que vous tes correctement mis la terre avant de toucher les matriaux internes. Lorsque vous travaillez avec un quipement fabriqu avec des appareils lectroniques, des procdures de mise la terre ESD appropries doivent tre suivies pour s'assurer que les personnes, les produits et les outils sont aussi exempts de charges statiques que possible. Les sangles de mise la terre, les blouses conductrices et les tapis de travail conducteurs sont spcialement conus cet effet. Toute personne effectuant la maintenance sur le terrain d'un quipement AMX doit utiliser un kit de maintenance sur site ESD complet comprenant au moins un tapis de travail dissipatif avec cordon de masse et un bracelet antistatique homologu UL avec un autre cordon de masse. INFORMATIONS DE CONFORMIT ET DE CONFORMIT EMC DE FAC ET DE CANADA :
Cet appareil est conforme la partie 15 des rgles FCC. Son fonctionnement est soumis aux deux conditions suivantes : (11 Cet appareil ne doit pas provoquer d'interfrences nuisibles et (21 cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. REMARQUE : Cet quipement a t test et jug conforme aux limites applicables un dispositif numrique de Classe B, selon le chapitre 15 de la rglementation de la FCC. Ces limites sont prvues pour offrir une protection raisonnable contre les interfrences nuisibles au sein dune installation rsidentielle. Cet quipement gnre, utilise et peut mettre une nergie radiofrquence et, s'il n'est pas install et utilis conformment au mode d'emploi, peut produire des interfrences affectant les communications radio. Labsence dinterfrences au sein dune installation particulire nest cependant pas garantie. Sil savre que cet quipement cause des interfrences nuisibles la rception des appareils de radio ou de tlvision, ce quon peut dterminer en allumant et en teignant lquipement, nous conseillons lutilisateur dessayer de corriger ces interfrences en prenant une ou plusieurs des mesures suivantes:
Rorienter ou repositionner lantenne rceptrice. loigner davantage l'quipement du rcepteur. Brancher lquipement sur la prise dun circuit diffrent de celui auquel est connect le rcepteur. Consulter le revendeur ou un technicien expriment en radio et tlvision. ATTENTION : Cet quipement est conforme la Classe B de la norme CISPR 32. Dans un environnement rsidentiel, cet quipement peut provoquer des interfrences radio. ATTENTION : Ce produit ne doit pas tre utilis dans les zones rsidentielles. REMARQUE : des fins de brouillage, les environnements rsidentiel et domestique sont dfinis comme tant un environnement situ moins de 11 mtres d'un appareil de rception radio ou de radiodiffusion ou usage domestique. CAN ICES-3 (B1/NMB-3(B1 REMARQUE : Cette unit a t teste avec des cbles blinds sur les priphriques. Des cbles blinds doivent tre utiliss avec l'unit pour assurer la conformit. MISE EN GARDE : Les changements ou modifications non expressment approuvs par le fabricant peuvent annuler l'autorit de l'utilisateur utiliser cet appareil. INFORMATIONS DE CONFORMIT DU TRANSMETTEUR SANS FIL :
Le terme IC: avant le numro de certification radio signifie seulement que les spcifications techniques d'Industrie Canada ont t respectes. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (11 l'appareil ne doit pas produire de brouillage, et (21 l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil est conforme FCC et IC l'exposition aux rayonnements limites fixes pour un environnement non contrl. Cet appareil doit tre install et utilis avec une distance minimale de 21 cm entre le radiateur et votre corps. Cet transmetteur ne doit pas tre co-situ ou oprant en liaison avec toute autre antenne ou transmetteur. INFORMATIONS DE CONFORMIT UE :
Par la prsente, AMX LLC dclare que l'quipement de type ACV-5100GR / ACV-5100BL est conforme ce qui suit : Directive 2111/65 / UE de l'Union europenne sur la restriction des substances dangereuses (RoHS21; DEEE de l'Union europenne (refonte1 Directive 2112/19 / UE; Directive europenne sur l'enregistrement, l'valuation, l'autorisation et la restriction des substances chimiques (REACH1 1917/2116 Directive europenne sur les quipements hertziens (RED1 2114/53 / UE. Le texte intgral de la dclaration de conformit UE est disponible l'adresse internet suivante : http://www.amx.com/techcenter/certifications.asp. Ce produit contient des batteries couvertes par la directive europenne 2116/66 / CE, qui ne peuvent pas tre limines avec les ordures mnagres. Veuillez suivre les rglementations locales. GAMME DE FRQUENCES SANS FIL ET PUISSANCE DE SORTIE SANS FIL :
2412-2481 MHz 5,2 mW AVIS WEEE :
Cet appareil est tiquet conformment la directive europenne 2112/19 / UE relative aux dchets d'quipements lectriques et lectroniques (DEEE1. Cette tiquette indique que ce produit ne doit pas tre jet avec les ordures mnagres. Il devrait tre dpos dans une installation approprie pour permettre la rcupration et le recyclage.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-09-03 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2018-09-03
|
||||
1 2 | Applicant's complete, legal business name |
Harman International Industries, Inc
|
||||
1 2 | FCC Registration Number (FRN) |
0026894154
|
||||
1 2 | Physical Address |
8500 Balboa Boulevard
|
||||
1 2 |
Northridge, California 91329
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@siemic.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
API
|
||||
1 2 | Equipment Product Code |
ACBVIBE
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
T******** S********
|
||||
1 2 | Title |
Manager, Compliance
|
||||
1 2 | Telephone Number |
818-8********
|
||||
1 2 | Fax Number |
818-8********
|
||||
1 2 |
t******@harman.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Sound Bar | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
EST Technology Co., Ltd.
|
||||
1 2 | Name |
I******** H********
|
||||
1 2 | Telephone Number |
+86 0******** Extension:
|
||||
1 2 |
i******@gdest.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0067000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0070000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC