Picture for reference only User Manual Verizon RCU VRC4100B (RTL8762CKO) Confidential Page 1 of 3 1. Products Functions The VRC4100B remote control is primarily designed via BLE to connect with Verizon RF set-top box. This connection is needed to control all essential features that Verizon offers, including browsing content, playing videos, and conducting voice searches. BLE are also used for over-the-
air firmware upgrades as well as the download of TV control codes. The remote further includes infrared (IR), used to control a TV/Audio when it is connected to the STB. Prior to this, the RCU needs to be configured via Omniss simple setup. 2. Product Summary The RCU has 33keys, BLE transceiver, microphone, IR transmitter, RGB LED indicator, buzzer, white backlight, Accelerometer. The RCU supports BLE (HID keys, voice & OTA), TV/Audio-IR (SSU), Findme. 3. Auto Pairing mechanism RCU can start auto pairing if it is not paired:
1) Point at STB and press MIC button, RCU starts undirected advertising for pairing, LED will blink. 2) If pairing is successful, LED will provide a Pairing Success blink. 3) If pairing is failed, LED will provide a Pairing Failure blink. 4. Voice RCU features a button to activate the Voice Search application to search for content by speaking through the remotes built-in microphone. The RCU supports one-way voice transferred from RCU to host. 5. OTA upgrade The RCU software supports upgrade via OTA (Over-The-Air). 6. Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. User Manual Confidential Page: 2 of 3 7. Caution:
- Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
- Risk of explosion if batteries are replaced by an incorrect type. Only use AA alkaline batteries. 8. FCC information:
FCC ID: 2AGOFRC473A FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure statement This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. User Manual Confidential Page: 3 of 3