FCC ID: HD5-EDA61K1 Mobile Computer

ScanPal EDA61K Series Mobile Computer powered by Android Quick Start Guide EDA61K-A-EN-QS-01 Rev (a) 11/19 Out of the Box Make sure that your shipping box contains these items:

ScanPal Mobile Computer

(Model EDA61K-0 or EDA61K-1) Rechargeable 3.6 V Li-ion battery Hand strap Product documentation If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service. Note: EDA61K-0 models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or microSDHC memory cards with ScanPal mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options. 1 Mobile Computer Features Power Indicator Touch Panel Home Key Keyboard

(Model dependent) Caps Lock Key Scan Engine Scan Indicator Scan Button Return Key Power Button Microphone 2 laser Safety Label Location Camera Flash/Flashlight Hand Strap Battery Battery Latch and Button Speaker I/O Connector USB Port Micro SIM Card and MicroSD Card Cover

(battery and hand strap removed) 3 Install a Micro SIM Card Only EDA61K-1 (WWAN) models support micro SIM card use for cellular phone features. On EDA61K-0 (WLAN) models, the micro SIM slot feature is limited to UICC card use for NFC Secure Element NFC link encryption only. 1 2 5 4 3 4 Note: Always power off the computer before attempting to install or remove a card. Install a microSD Card (Optional) Note: Format the microSD card before initial use. 1 2 3 Note: Always power off the computer before attempting to install or remove a card. Install the Battery The EDA61K ships with a Li-ion 3.6 V battery manufactured for Honeywell International Inc We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty. 5 2 1 4 3 6 Charge the EDA61K The EDA61K mobile computer ships with a partially charged battery. Charge the battery with an EDA61K or EDA61K charging device for a minimum of 4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty. EDA61K mobile computer are designed for use with EDA61K and EDA61K series charging accessories. For more information about accessories, see the ScanPal EDA60/EDA61K Series Enterprise Mobile computer Accessories Guide at www.honeywellaidc.com. Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. 7 Remove the Battery 3 2 1 Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration bar code or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode (see page 12) is automatically turned off

(disabled). To turn the computer on:

Press and hold the Power button for approximately 3 seconds, and then release. To turn the computer off:

appears. 2. Touch Power off. 1. Press and hold the Power button until the options menu Note: You should always power off the computer before removing the battery. 8 Sleep Mode Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. 1. Press and release the Power button to wake the computer. 2. Drag the lock icon toward the top of the display to unlock the Mobile. Adjust the Display Sleep Time To adjust the amount of time before the display sleeps after inactivity:

1. Swipe up on the Home screen. 2. Select Settings > Display > Advanced > Sleep. 3. Select the amount of time before the display goes to sleep. 4. Press to return to the Home screen. 9 About the Home Screen Notification /

Status Bar Search Bar to initiate a Touch voice search or command. Home Screen Panel Favorites Tray 10 To learn how to customize the Home screen, see the user guide. Navigation and Function Buttons For button locations, see Mobile Computer Features. Button Description Back Home Scan Power Return to the previous screen. Return to the Home screen. Press left or right Scan button to trigger the scanner. See Turn Power On/Off on page 8. 11 About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a bar code to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Bar Code with the Scan Demo For optimum performance, avoid reflections by scanning the bar code at a slight angle. 1. Swipe up on the screen to access all apps. 2. Select Demos > Scan Demo. 3. Point the computer at the bar code. 4. Touch Scan on the screen or press and hold any Scan button. Center the aiming beam over the bar code. The decode results appear on the screen. Note: In the Scan Demo app, not all bar code symbologies are enabled by default. If a bar code does not scan, the correct symbology may not be enabled. To learn how to modify the default app settings, see the user guide. 12 Sync Data To move files between your EDA61K and your computer:

1. Connect the EDA61K to your computer using a USB charge/communication dock or snap on. 2. On the EDA61K, swipe down from the top of the screen to see the notifications panel. 3. Select the Android System notification twice to open the options menu. 4. Select either File Transfer or PTP. 5. Open the file browser on your computer. 6. Browse to the EDA61K. You can now copy, delete, and move files or folders between your computer and EDA61K as you would with any other storage drive (e.g., cut and paste or drag and drop). Note: When Provisioning mode is turned off, some folders are hidden from view in the file browser. 13 Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. 1. Press and hold the Power button until the options menu appears. 2. Select Restart. To restart the computer if the touch panel display is unresponsive:

Press and hold the Power button for approximately 8 seconds until the computer restarts. Note: To learn about advanced reset options, see the user guide. Support To search our knowledge base for a solution or to log into the Technical Support portal and report a problem, go to www.hsmcontactsupport.com. Documentation Product documentation is available at www.honeywellaidc.com. Limited Warranty For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty. Patents For patent information, see www.hsmpats.com. 14

Disclaimer Honeywell International Inc. (HII) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright2019 Honeywell International Inc. All rights reserved. 15 EDA61K-RegSht Rev(B) Agency Model:EDA61K-0/EDA61K-1 EDA61K-RegSht Rev(B) LED Safety Statement LEDs have been tested and classied as EXEMPT RISK GROUP to the standard:

IEC 62471:2006. Norme de scurit sur les DEL Les DEL ont t testes et classes en tant que GROUPE DE RISQUE EXEMPT par rapport la norme : IEC 62471:2006. Norme de scurit DEL Les DEL ont t testes et classes GROUPE SANS RISQUE selon la norme : CEI 62471:2006. Disposizione di sicurezza LED I LED sono stati testati e classicati come

"GRUPPO ESENTE DA RISCHI" rispetto allo standard: IEC 62471:2006. Hinweis zur Lasersicherheit Die LEDs wurden geprft und gem der Norm IEC 62471:2006 unter EXEMPT RISK GROUP eingestuft. Declaracin de seguridad del LED Los LED se han probado y clasicado como GRUPO EXENTO DE RIESGOS segn la normativa: IEC 62471:2006. Declaracin de seguridad del LED Las LED han sido evaluadas y clasicadas como GRUPO LIBRE DE RIESGOS segn la norma: IEC 62471:2006. LED LED IEC 62471:2006

(EXEMPT RISK GROUP) 62471:2006. Laser Safety Statement If the following label is attached to your product, it indicate the product contains a laser engine or laser aimer:

duration of 34 mSec. conformance with IEC 60825-

1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019. Pulse duration of 6.44 mSec. conformance with IEC 60825-

1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019. Pulse This device has been tested in accordance with and complies with IEC60825-1 ed2.0 and 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No. 56, dated May 8, 2019. LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT,1.0 mW MAX OUTPUT:650nM. Caution-use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1.14

(Only for EDA61K-1)

Label Label Location

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: HD5-EDA61K1 Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Turn-up Information Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until (180 days):

External Photos / Internal Photos Test Setup Photos / User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Signature Date: 2020/11/30 Name/Title: Mandana Salahshour / Compliance Manager TEL: +1 8038358190-8190 Email: Mandana.Mobasher@honeywell.com

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Client Declaration Letter Date: Nov 30, 2020 FCC ID: HD5-EDA61K1 We have declared below featured for device identified as

(1) DFS Device Master,

(2) Active / Passive Scanning , ad hoc mode access point capability Client without radar detection capability, N/A Client with Radar detection capability , Frequency Band (MHz) 2412 - 2462 5180 - 5240 5260 - 5320 5500 - 5720 5745 - 5825 Client Mode Yes Yes Yes Yes Yes Ad Hoc Mode capability Access point Capability WiFi Direct Group Owner WiFi Direct Group Client Yes No No No No Yes No No No No Yes No No No No Yes No No No No

(3) Country code selection capability to end user-

Yes No If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country selection)

(4) Meet Part 15.202 requirement -

Yes , No ,

* A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cant be modified by end user or an installer. Apply No Apply

(If apply, pls help to provide explanation on it was implement, and how software was controlled). Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Statement for Label Requirement We state that the label of our device, FCC ID: HD5-EDA61K1 will be put in the The label is visible to the users as they purchase the Mobile Computer and Date: Nov 30, 2020 battery compartment. install the SD card. Sincerely, Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Non-SDR (Software Defined Radio) Cover Letter Date: Nov 30, 2020 Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through software?

Yes - go to 2. No, not an SDR Reply: Yes 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters

(frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)?

Yes, must be an SDR. No - go to 3. 3. Is the device capable of operating in any other in any other way than granted, or will be, granted?

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Reply: No Yes, - go to 4. No - go to 5. Reply: No 4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)?

Yes, qualifies as a part 15 client devices - go to 5. No, must be an SDR. 5. Does the manufacturer elect SDR?

Yes, elects to be an SDR. This product shall be approval as a Non-SDR which is declared by No, Not an SDR Reply: No Final conclusion:

the applicant. Sign by:

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Print Name: Mandana Salahshour Title: Compliance Manager

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Date: Nov 30, 2020 Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-EDA61K1 To Whom It May Concerm:

This letter is to ascertain that the following information of applicant, product with model(s) have been the units used for conducting FCC compliance testing, the sDoC part will be tested by FCC recognized test lab. Product: Mobile Computer Model: EDA61K-1 If you have any question or concerns, pls. contact us. Signature:

Name: Mandana Salahshour / Compliance Manager Position: Product Compliance Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Declaration of Authorization We Name: Honeywell International Inc Honeywell Safety and Productivity Solutions Address: 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Declare that:

Name Representative of agent: Marlin Chen Agent Company name:

MRT Technology (Suzhou) Co., Ltd Address:

City:

Country Suzhou China D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone, is authorized to apply for Certification of the following product(s):

Product description: Mobile Computer Type designation: EDA61K-1 Trademark: Honeywell FCC ID: HD5-EDA61K1 on our behalf. Signature:

Name/Title: Mandana Salahshour / Compliance Manager Honeywell International Inc TEL: +1 8038358190-8190 Email: Mandana.Mobasher@honeywell.com 2020-11-30