companies    

FCC ID: B94-RTL8822CEDL 802.11 a/b/g/n/ac RTL8822CE Combo Module

by: HP Inc. latest update: 2020-03-03 model: RTL8822CEDL

Six grants have been issued under this FCC ID from 01/31/2020 to 03/03/2020 (this is one of one hundred and fifty-three releases in 2020 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked password defaults, troubleshooting guides, warrantee terms, instructions, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manuals photos label
app s submitted / available
1 2 3 4 5 6 Users Manual Users Manual pdf 1.84 MiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 Users Manual Regulatory Notices Users Manual pdf 2.33 MiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 Internal Photos Internal Photos pdf 855.47 KiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 External Photos External Photos pdf 420.04 KiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 ID Label/Location Info ID Label/Location Info pdf 152.38 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 FCC CIIPC Letter Cover Letter(s) pdf 115.95 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 FCC delegation - RPT to Frances Liang Cover Letter(s) pdf 28.08 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 FCC agent auth letter Cover Letter(s) pdf 13.88 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Regulatory WLAN Antenna NB mode AWAN Operational Description pdf March 02 2020 confidential
1 2 3 4 5 6 Regulatory WLAN Antenna NB mode HB Operational Description pdf March 02 2020 confidential
1 2 3 4 5 6 Regulatory WLAN Antenna NB module INPAQ Operational Description pdf March 02 2020 confidential
1 2 3 4 5 6 Regulatory WLAN Antenna TB mode AWAN Operational Description pdf March 02 2020 confidential
1 2 3 4 5 6 Regulatory WLAN Antenna TB mode HB Operational Description pdf March 02 2020 confidential
1 2 3 4 5 6 Regulatory WLAN Antenna TB module INPAQ Operational Description pdf March 02 2020 confidential
1 2 3 4 5 6 Request for LT or STC confidentiality Cover Letter(s) pdf 79.77 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Test Report SAR RF Exposure Info pdf 1002.78 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Test Report SAR Appendix B RF Exposure Info pdf 834.04 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Test Report SAR Appendix C RF Exposure Info pdf 1.09 MiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Test Setup Photos SAR Test Setup Photos pdf 343.06 KiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 Confidentiality Cover Letter(s) pdf 8.80 KiB January 22 2020 / January 31 2020
1 2 3 4 5 6 FCC agent auth letter Cover Letter(s) pdf 18.02 KiB January 22 2020 / January 31 2020
1 2 3 4 5 6 New grantee FCC Auth Ltr for Change of ID Cover Letter(s) pdf 13.69 KiB January 22 2020 / January 31 2020
1 2 3 4 5 6 Original grantee FCC Auth Ltr for Change of ID Cover Letter(s) pdf 189.24 KiB January 22 2020 / January 31 2020
1 2 3 4 5 6 Users Manual Users Manual pdf 1.84 MiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 Users Manual Regulatory Notices Users Manual pdf 2.33 MiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 Internal Photos Internal Photos pdf 855.47 KiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 External Photos External Photos pdf 420.04 KiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 ID Label/Location Info ID Label/Location Info pdf 152.38 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 FCC CIIPC Letter Cover Letter(s) pdf 115.95 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 FCC delegation - RPT to Frances Liang Cover Letter(s) pdf 28.08 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 FCC agent auth letter Cover Letter(s) pdf 13.88 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Request for LT or STC confidentiality Cover Letter(s) pdf 79.77 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Test Report SAR RF Exposure Info pdf 1002.78 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Test Report SAR Appendix B RF Exposure Info pdf 834.04 KiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Test Report SAR Appendix C RF Exposure Info pdf 1.09 MiB March 02 2020 / March 03 2020
1 2 3 4 5 6 Test Setup Photos SAR Test Setup Photos pdf 343.06 KiB March 02 2020 / August 30 2020 delayed release
1 2 3 4 5 6 Confidentiality Cover Letter(s) pdf 8.80 KiB January 22 2020 / January 31 2020
1 2 3 4 5 6 FCC agent auth letter Cover Letter(s) pdf 18.02 KiB January 22 2020 / January 31 2020
1 2 3 4 5 6 New grantee FCC Auth Ltr for Change of ID Cover Letter(s) pdf 13.69 KiB January 22 2020 / January 31 2020
1 2 3 4 5 6 Original grantee FCC Auth Ltr for Change of ID Cover Letter(s) pdf 189.24 KiB January 22 2020 / January 31 2020

frequency equipment class purpose
1 2020-03-03 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2412 ~ 2472 DTS - Digital Transmission System
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2020-01-31 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Change in Identification
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 2412 ~ 2472 DTS - Digital Transmission System

Application Forms

app s Applicant Information
1 2 3 4 5 6 Effective 2020-03-03
1 2 3 4 5 6 2020-01-31
1 2 3 4 5 6 Applicant's complete, legal business name HP Inc.
1 2 3 4 5 6 FCC Registration Number (FRN) 0025126541
1 2 3 4 5 6 Physical Address 3390 East Harmony Road
1 2 3 4 5 6 Fort Collins
1 2 3 4 5 6 United States
app s TCB Information
1 2 3 4 5 6 TCB Application Email Address c******@telefication.com
1 2 3 4 5 6 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 6 Grantee Code B94
1 2 3 4 5 6 Equipment Product Code RTL8822CEDL
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 Name R****** P******** T******
1 2 3 4 5 6 Title US Canada Technical Regulations
1 2 3 4 5 6 Telephone Number 970-8********
1 2 3 4 5 6 Fax Number 000-0********
1 2 3 4 5 6 E-mail r******@hp.com
app s Technical Contact
1 2 3 4 5 6 Firm Name SGS Taiwan Ltd
1 2 3 4 5 6 SGS Taiwan Ltd.
1 2 3 4 5 6 Name J**** C******
1 2 3 4 5 6 Physical Address 134, Wu Kung Road, WuKu Industrial Zone
1 2 3 4 5 6 Taiwan
1 2 3 4 5 6 Telephone Number 886 2********
1 2 3 4 5 6 88622******** Extension:
1 2 3 4 5 6 Fax Number 886 2********
1 2 3 4 5 6 88622********
1 2 3 4 5 6 E-mail j******@sgs.com
app s Non Technical Contact
1 2 3 4 5 6 Firm Name SGS Taiwan Ltd
1 2 3 4 5 6 SGS Taiwan Ltd.
1 2 3 4 5 6 Name J****** C******
1 2 3 4 5 6 Physical Address 134, Wu Kung Road, WuKu Industrial Zone
1 2 3 4 5 6 Taiwan
1 2 3 4 5 6 Telephone Number 886 2********
1 2 3 4 5 6 88622******** Extension:
1 2 3 4 5 6 Fax Number 886 2********
1 2 3 4 5 6 88622********
1 2 3 4 5 6 E-mail j******@sgs.com
app s Confidentiality (long or short term)
1 2 3 4 5 6 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)08/30/2020
1 2 3 4 5 6 07/21/2020
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 Equipment ClassNII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 DTS - Digital Transmission System
1 2 3 4 5 6 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11 a/b/g/n/ac RTL8822CE Combo Module
1 2 3 4 5 6 802.11a/b/g/n/ac RTL8822CE Combo Module
1 2 3 4 5 6 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 6 Change in Identification
1 2 3 4 5 6 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 Grant CommentsClass II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.13 W/kg and 1.25 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
1 2 3 4 5 6 Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.59 W/kg and 1.02 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
1 2 3 4 5 6 Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body-worn accessory and simultaneous transmission use conditions are <0.1 W/kg, and 1.15 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
1 2 3 4 5 6 Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.
1 2 3 4 5 6 Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
1 2 3 4 5 6 Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes.
1 2 3 4 5 6 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 Firm Name SGS Taiwan Ltd. Electronics & Communication Lab
1 2 3 4 5 6 SGS Taiwan Ltd.
1 2 3 4 5 6 Name R******** W******
1 2 3 4 5 6 R****** W****
1 2 3 4 5 6 Telephone Number +886-******** Extension:
1 2 3 4 5 6 +886-******** Extension:
1 2 3 4 5 6 Fax Number +886-********
1 2 3 4 5 6 +886-********
1 2 3 4 5 6 E-mail r******@sgs.com
1 2 3 4 5 6 R******@sgs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.203
1 2 15E CC MO ND 5260 5320 0.207
1 3 15E CC MO ND 5500 5720 0.217
1 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.016
2 2 15C CC MO 2412 2472 0.794
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.203
4 2 15E CC MO ND 5260 5320 0.207
4 3 15E CC MO ND 5500 5720 0.217
4 4 15E CC MO 5745 5825 0.308
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.016
6 2 15C CC MO 2412 2472 0.794

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

potentially related items: B94HHI14CN USERS MANUAL B94-9560D2WZ User Manual B94HHF606 User manual Final Review

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC