FCC ID: B94HNAR01 802.11 a/b/g/n WI-FI + BT COMBO ADAPTER

by: HP Inc. latest update: 2013-05-29 model: HNAR01

Six grants have been issued under this FCC ID from 05/21/2013 to 05/29/2013 (this is one of seventy releases in 2013 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked warrantee terms, instructions, troubleshooting guides, password defaults, & drivers.
permalink for this FCC identifier
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 5 6 User Manual Users Manual pdf 648.07 KiB
1 2 3 4 5 6 User Manual Quick Start Guide Users Manual pdf 942.02 KiB
1 2 3 4 5 6 Users Manual Regulatory Guide Users Manual pdf 1023.15 KiB
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 External Photos pdf
1 2 3 4 5 6 Internal Photos pdf
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 ID Label/Location Info pdf
1 2 3 4 5 6 ID Label/Location Info pdf
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 RF Exposure Info pdf
1 2 3 4 5 6 RF Exposure Info pdf
1 2 3 4 5 6 RF Exposure Info pdf
1 2 3 4 5 6 RF Exposure Info pdf
1 2 3 4 5 6 Test Setup Photos pdf
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 RF Exposure Info pdf
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 Test Report pdf
1 2 3 4 5 6 Test Report pdf
1 2 3 4 5 6 Test Setup Photos pdf / December 11 2013
1 2 3 4 5 6 Test Setup Photos pdf / December 11 2013
1 2 3 4 5 6 Cover Letter(s) pdf
1 2 3 4 5 6 Test Report pdf
1 2 3 4 5 6 Test Report pdf
1 2 3 4 5 6 Test Setup Photos pdf / December 11 2013
1 2 3 4 5 6 Test Setup Photos pdf / December 11 2013
1 2 3 4 5 6 Test Report pdf
1 2 3 4 5 6 User Manual Users Manual pdf 648.07 KiB
1 2 3 4 5 6 User Manual Quick Start Guide Users Manual pdf 942.02 KiB
1 2 3 4 5 6 Users Manual Regulatory Guide Users Manual pdf 1023.15 KiB

frequency equipment class purpose
1 2013-05-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
2 5755 ~ 5795 DTS - Digital Transmission System
3 5650 ~ 5700 NII - Unlicensed National Information Infrastructure TX
4 2013-05-21 5650 ~ 5700 NII - Unlicensed National Information Infrastructure TX Original Equipment
5 5755 ~ 5795 DTS - Digital Transmission System
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
1 2 3 4 5 6 Effective 2013-05-29
1 2 3 4 5 6 2013-05-21
1 2 3 4 5 6 Applicant's complete, legal business name HP Inc.
1 2 3 4 5 6 FCC Registration Number (FRN) 0025126541
1 2 3 4 5 6 Physical Address 3390 East Harmony Road
1 2 3 4 5 6 Fort Collins, Colorado 80528
1 2 3 4 5 6 United States
app s TCB Information
1 2 3 4 5 6 TCB Application Email Address T******@TIMCOENGR.COM
1 2 3 4 5 6 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 6 Grantee Code B94
1 2 3 4 5 6 Equipment Product Code HNAR01
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 Name R****** P**** T****
1 2 3 4 5 6 Title US Canada Technical Regulations
1 2 3 4 5 6 Telephone Number 970-8********
1 2 3 4 5 6 Fax Number 000-0********
1 2 3 4 5 6 E-mail r******@hp.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)11/20/2013
1 2 3 4 5 6 11/12/2013
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 DTS - Digital Transmission System
1 2 3 4 5 6 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11 a/b/g/n WI-FI + BT COMBO ADAPTER
1 2 3 4 5 6 802.11 a/b/g/n WI-FI+BT combo adapter
1 2 3 4 5 6 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 Modular Equipment TypeLimited Single Modular Approval
1 2 3 4 5 6 Does not apply
1 2 3 4 5 6 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 3 4 5 6 Original Equipment
1 2 3 4 5 6 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 Grant CommentsSingle Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127.
1 2 3 4 5 6 Single Modular Transmitter. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127 The highest reported SAR value is 1.38W/kg.
1 2 3 4 5 6 Single Modular Approval. Power listed is maximum conducted output power. Operations in 5.15-5.25GHz band are for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.08dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127. The highest reported SAR value is 1.15W/kg.
1 2 3 4 5 6 Single Modular Approval. Power listed is maximum conducted output power. Operations in 5.15-5.25GHz band are for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.08dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes.
1 2 3 4 5 6 Single Modular Transmitter. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes.
1 2 3 4 5 6 Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
1 2 3 4 5 6 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 Firm Name Sporton International Inc.
1 2 3 4 5 6 Name A****** C********
1 2 3 4 5 6 Telephone Number 886-3******** Extension:
1 2 3 4 5 6 Fax Number 886-3********
1 2 3 4 5 6 E-mail a******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0023000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.007
2 2 15C CC 2412 2462 0.1702
2 3 15C CC 2422 2452 0.1069
2 4 15C CC 5745 5825 0.1524
2 5 15C CC 5755 5795 0.1135
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC ND 5180 5240 0.0245
3 2 15E CC ND 5190 5230 0.0126
3 3 15E CC ND 5260 5320 0.0246
3 4 15E CC ND 5270 5310 0.0113
3 5 15E CC ND 5500 5600 0.025
3 6 15E CC ND 5510 5600 0.0119
3 7 15E CC ND 5650 5700 0.022
3 8 15E CC ND 5650 5670 0.01
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC ND 5180 5240 0.0245
4 2 15E CC ND 5190 5230 0.0126
4 3 15E CC ND 5260 5320 0.0246
4 4 15E CC ND 5270 5310 0.0113
4 5 15E CC ND 5500 5600 0.025
4 6 15E CC ND 5510 5600 0.0119
4 7 15E CC ND 5650 5700 0.022
4 8 15E CC ND 5650 5670 0.01
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.007
5 2 15C CC 2412 2462 0.1702
5 3 15C CC 2422 2452 0.1069
5 4 15C CC 5745 5825 0.1524
5 5 15C CC 5755 5795 0.1135
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0023000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC