all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Manual | Users Manual | 346.79 KiB | ||||
1 2 |
|
Manual 28 | Users Manual | 459.73 KiB | ||||
1 2 |
|
Manual 981 | Users Manual | 459.06 KiB | ||||
1 2 |
|
Int | Internal Photos | 170.42 KiB | ||||
1 2 |
|
Ext | External Photos | 218.11 KiB | ||||
1 2 |
|
Agent Authorization | Cover Letter(s) | 25.40 KiB | ||||
1 2 |
|
Confid Request | Cover Letter(s) | 26.79 KiB | ||||
1 2 |
|
PCII Request | Cover Letter(s) | 25.56 KiB | ||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) |
1 2 | Manual | Users Manual | 346.79 KiB |
Cover SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) WLAN Module IEEE 802.11n/g/b User Guide Doc. No. MV-SR00222-13, Rev. February 3, 2012 Document Classification: Proprietary Marvell. Moving Forward Faster SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide Document Conventions Note: Provides related information or information of special importance. Caution: Indicates potential damage to hardware or software, or loss of data. Warning: Indicates a risk of personal injury. Document Status Doc Status: 1.00 Technical Publication: 0.xx For more information, visit our website at: www.marvell.com Disclaimer No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of Marvell. Marvell retains the right to make changes to this document at any time, without notice. Marvell makes no warranty of any kind, expressed or implied, with regard to any information contained in this document, including, but not limited to, the implied warranties of merchantability or fitness for any particular purpose. Further, Marvell does not warrant the accuracy or completeness of the information, text, graphics, or other items contained within this document. Marvell products are not designed for use in life-support equipment or applications that would cause a life-threatening situation if any such products failed. Do not use Marvell products in these types of equipment or applications. With respect to the products described herein, the user or recipient, in the absence of appropriate U.S. government authorization, agrees:
1) Not to re-export or release any such information consisting of technology, software or source code controlled for national security reasons by the U.S. Export Control Regulations ("EAR"), to a national of EAR Country Groups D:1 or E:2;
2) Not to export the direct product of such technology or such software, to EAR Country Groups D:1 or E:2, if such technology or software and direct products thereof are controlled for national security reasons by the EAR; and, 3) In the case of technology controlled for national security reasons under the EAR where the direct product of the technology is a complete plant or component of a plant, not to export to EAR Country Groups D:1 or E:2 the direct product of the plant or major component thereof, if such direct product is controlled for national security reasons by the EAR, or is subject to controls under the U.S. Munitions List ("USML"). At all times hereunder, the recipient of any such information agrees that they shall be deemed to have manually signed this document in connection with their receipt of any such information. Copyright 19992012. Marvell International Ltd. All rights reserved. M Logo, Marvell, Moving Forward Faster, Alaska, Link Street, Prestera, Virtual Cable Tester, Yukon, Datacom Systems On Silicon, AnyVoltage, DSP Switcher, Feroceon, ZX, ZXSTREAM, Armada, Qdeo & Design, QuietVideo, TopDog, TwinD, and Kinoma are registered trademarks of Marvell or its affiliates. Avanta, Avastar, Carrierspan, DragonFly, HyperDuo, HyperScale, Kirkwood, LinkCrypt, Marvell Smart, The World As You See It, Turbosan, and Vmeta are trademarks of Marvell or its affiliates. Patent(s) PendingProducts identified in this document may be covered by one or more Marvell patents and/or patent applications. Doc. No. MV-SR00222-13 Rev. Page 2 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) WLAN Module PRODUCT OVERVIEW The Marvell SP88W8782UMA0 2.4 GHz v2.0
(SDGOB-1291, 1150-7959) is an embedded WLAN 802.11n/g/b radio module. It is designed to be fixed inside a printer product through a multi-pin digital interface connector and mounting brackets. The module is intended to be factory installed into an enclosed product. The module is a PCB consisting of the Marvell 88W8782U 1x1 SISO IEEE 802.11n/g/b WLAN SoC, host connector interface, RFIC switches, passive discrete components, and integrated passive printed circuit antennas. The embedded module operates under the control of the host printer in order to provide wireless network connectivity to other compatible devices using the IEEE 802.11n/g/b Wi-Fi standards. It is capable of operating in the 2.4122.472 GHz frequency band. The module requires DC power and configuration from the host printer in order to operate. Please refer to the printers users manual for more details. This product is for indoor use only. General Features
IEEE 802.11n/g/b compliant
Dual antenna supporting diversity
USB 2.0 host interface Chipset
Marvell 88W8782U Security
WEP 64- and 128-bit encryption with hardware TKIP processing (WPA)
AES-CCMP hardware implementation as part of 802.11i security standard (WPA2) Radio Characteristics
802.11n Up to 13 channels (HT20) Up to 9 channels (HT40) MCS0MCS7 (OFDM)
802.11g
802.11b Up to 13 channels 64QAM/16QAM/QPSK/BPSK/CCK (OFDM, DSSS) Up to 14 channels (Japan) 64QAM/16QAM/QPSK/BPSK/CCK (OFDM, DSSS) Software
Linux supported with drivers based on Fedora Core 13 Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 3 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SR00222-13 Rev. Page 4 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 Table of Contents Table of Contents Product Overview .......................................................................................................................................3 Table of Contents .......................................................................................................................................5 List of Figures.............................................................................................................................................6 List of Tables ..............................................................................................................................................7 1 1.1 2 2.1 2.2 2.3 2.4 A B C Signal Description .........................................................................................................................9 Pinout ................................................................................................................................................................9 Electrical Specifications .............................................................................................................11 Absolute Maximum Ratings ............................................................................................................................11 Operating Conditions ......................................................................................................................................11 WLAN RF Specifications.................................................................................................................................12 Receive Mode Specification2.4 GHz.............................................................................................12 2.3.1 2.3.2 Transmit Mode Specification2.4 GHz............................................................................................13 WLAN Functions .............................................................................................................................................14 2.4.1 WLAN Data Rates ............................................................................................................................14 Regulatory Conformance............................................................................................................15 Regulatory Statements ...............................................................................................................16 Revision History ..........................................................................................................................27 Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 5 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide List of Figures Product Overview .......................................................................................................................................3 1 2 A B C Signal Description ............................................................................................................................. 9 Pin Diagram ........................................................................................................................................9 Figure 1:
Electrical Specifications ................................................................................................................. 11 Regulatory Conformance.................................................................................................................15 Regulatory Statements.....................................................................................................................16 Revision History ...............................................................................................................................27 Doc. No. MV-SR00222-13 Rev. Page 6 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 List of Tables List of Tables 1 2 A B C Signal Description ..............................................................................................................................9 Table 1:
Pin List ..............................................................................................................................................10 Electrical Specifications ..................................................................................................................11 Absolute Maximum Ratings ..............................................................................................................11 Table 2:
Operating Conditions ........................................................................................................................11 Table 3:
Table 4:
802.11n Rx ModeReceive Sensitivity (2.4 GHz) ...........................................................................12 802.11g/b Rx ModeReceive Sensitivity (2.4 GHz) ........................................................................12 Table 5:
802.11n Tx ModeTransmit Power (2.4 GHz).................................................................................13 Table 6:
Table 7:
802.11g/b Tx ModeTransmit Power (2.4 GHz)..............................................................................13 WLAN Data Rates ............................................................................................................................14 Table 8:
Table 9:
MCS Index ........................................................................................................................................14 Regulatory Conformance.................................................................................................................15 Regulatory Statements.....................................................................................................................16 Revision History ...............................................................................................................................27 Table 10: Revision History................................................................................................................................27 Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 7 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SR00222-13 Rev. Page 8 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 Signal Description Pinout 1 1.1 Signal Description Pinout Figure 1: Pin Diagram 1 3 5 7 VDD33 GND USB_DPLS PDn/RESETn VDD33 GND USB_DMNS GPIO[2]
2 4 6 8 Straight Connector (Bottom Side View) Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 9 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide Table 1:
Pin List Pin#
Pin Name 1 2 3 4 5 6 7 8 VDD33 VDD33 GND GND USB_DPLS USB_DMNS PDn/RESETn GPIO[2]
Doc. No. MV-SR00222-13 Rev. Page 10 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 Electrical Specifications Absolute Maximum Ratings 2 2.1 Electrical Specifications Absolute Maximum Ratings Table 2: Absolute Maximum Ratings Symbol VDD33 IDD33 TSTORAGE HSTORAGE 2.2 Parameter USB 2.0 Power Supply VDD33 Max Current Rating Storage Temperature Storage Humidity Operating Conditions Table 3: Operating Conditions Symbol VDD33 TA fclock Parameter USB 2.0 Power Supply Ambient Operating Temperature Reference Clock Frequency Min
--
--
-55 90%
Min 2.97 5
--
Typ 3.3
--
--
--
Max 4.1 500 125 95%
Units V mA C RH Typ 3.3
--
40 Max 3.63 60
--
Units V C MHz Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 11 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide 2.3 2.3.1 WLAN RF Specifications Receive Mode Specification2.4 GHz Table 4:
802.11n Rx ModeReceive Sensitivity (2.4 GHz) Parameter Condition MCS7 MCS7 802.11n, 20 MHz, PER<10%
802.11n, 40 MHz, PER<10%
Min
-71
-68 Typ Max
--
--
--
--
Table 5:
802.11g/b Rx ModeReceive Sensitivity (2.4 GHz) Parameter Condition Min Typ Max 1 Mbps 6 Mbps 11 Mbps 54 Mbps 802.11b, PER<8%
802.11g, PER<10%
802.11b, PER<8%
802.11g, PER<10%
-97
-90
-85
-75
--
--
--
--
--
--
--
--
Units dBm Units dBm Doc. No. MV-SR00222-13 Rev. Page 12 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 Electrical Specifications WLAN RF Specifications 2.3.2 Transmit Mode Specification2.4 GHz Table 6:
802.11n Tx ModeTransmit Power (2.4 GHz) Parameter Condition MCS02 MCS35 MCS67 MCS02 MCS35 MCS67 802.11n, 20 MHz 802.11n, 20 MHz 802.11n, 20 MHz 802.11n, 40 MHz 802.11n, 40 MHz 802.11n, 40 MHz Table 7:
802.11g/b Tx ModeTransmit Power (2.4 GHz) Parameter 111 Mbps 618 Mbps 2436 Mbps 4854 Mbps Condition 802.11b 802.11g 802.11g 802.11g Units dBm Units dBm Min 13.5 12.5 11.5 11.5 10.5 10.5 Min 16.5 14.5 14.5 13.5 Typ 15 14 13 13 12 12 Typ 18 16 16 15 Max 16.5 15.5 14.5 14.5 13.5 13.5 Max 19.5 17.5 17.5 16.5 Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 13 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide 2.4 2.4.1 WLAN Functions WLAN Data Rates Table 8: WLAN Data Rates Mode 802.11n 802.11g 802.11b Rates MCS0MCS71 6, 9, 12, 18, 24, 36, 48, 54 1, 2, 5.5, 11 Units Index Mbps Mbps 1. MCS is an index for PHY rates in 802.11n mode which applies to both 2.4 GHz and 5 GHz frequency bands. Table 9: MCS Index MCS Index Modulation Code Rate Data Rates (Mbps) 0 1 2 3 4 5 6 7 BPSK QPSK 16QAM 64QAM 1/2 1/2 3/4 1/2 3/4 2/3 3/4 5/6 HT20 HT40 800 ns GI 400 ns GI 800 ns GI 400 ns GI 6.5 13 19.5 26 39 52 58.5 65 7.2 14.4 21.7 28.9 43.3 57.8 65 72.2 13.5 27 40.5 54 81 108 121.3 135 15 30 45 60 90 120 135 150 Doc. No. MV-SR00222-13 Rev. Page 14 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 Product Regulatory Compliance A Regulatory Conformance A.1 A.2 Product Regulatory Compliance The module is intended to be factory installed into an enclosed product. Final product regulatory testing will be required to satisfy non-intentional radiator compliance, susceptibility and safety standards. The module has been designed not to adversely affect this testing. Intentional Radiator Conformance The module has been tested and certified as an intentional radiator to the following standards:
Region Europe Standards EN 300 328 v1.7.1 (2006-10), EN 301 893 v1.5.1 Certificates Certificates United States FCC Part 15, Subpart C FCC Verification / FCC Grant Canada RSS-210, Issue 6, RSS-GEN ICES-003 Verification / Industry Canada Certificate Taiwan Japan Korea NCC LP0002 NCC Certificate Japan MIC Article 2, Clause 1, Item 19 MIC Certificate Korea Communication Commission (KCC) Notification No.: 2010-16 KCC Certificate Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 15 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide B Regulatory Statements B.1 Federal Communication Commission Interface
(FCC) Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected.
Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the built-in collocated transmitters. This device is intended only for Applicant integrators under the following conditions:
1)The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2)For all products market in US, Applicant has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. Applicant shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required. However, the Applicant integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Doc. No. MV-SR00222-13 Rev. Page 16 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 Federal Communication Commission Interface (FCC) Compliance IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the Applicant integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: B94SDGOB1291. Manual Information To the End User The Applicant integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as shown in this manual. Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 17 B.2 B.2.1 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide Canadian Regulatory Wireless Notice English This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device is intended only for Applicant integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) For all products market in IC, Applicant has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. Applicant shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required. However, the Applicant integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the Applicant integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 466D-SDGOB291. Manual Information To the End User The Applicant integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Doc. No. MV-SR00222-13 Rev. Page 18 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 B.2.2 Canadian Regulatory Wireless Notice French Cet appareil est conforme la norme RSS-210 des Rgles d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:
1) cet appareil ne peut pas provoquer d'interfrences et 2) cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil NOTE IMPORTANTE:
Dclaration IC d'exposition aux radiations:
Cet quipement est conforme l'exposition aux radiations IC limite dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec distance minimum de 20cm entre le radiateur et votre corps. Cet appareil est conu uniquement pour les intgrateurs de demandeur dans les conditions suivantes:
1) L'antenne doit tre installe de telle sorte que 20 cm est mis jour entre l'antenne et les utilisateurs, et 2) Pour tous les produits du march dans l'IC, le demandeur doit limiter les canaux de coopration dans CH1 CH11 pour 2.4G bande par l'outil de programmation du firmware fourni. Demandeur ne doit pas fournir un outil ou d'informations l'utilisateur final en ce qui concerne le changement de domaine de la rglementation. Tant que 2 conditions ci-dessus sont remplies, le test autre metteur ne sera pas ncessaire. Toutefois, l'intgrateur demandeur est toujours responsable pour tester leur produit final pour toutes les exigences de conformit supplmentaires ncessaires avec ce module est install. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent pas tre respectes (par exemple certaines configurations d'ordinateurs portables ou de co-implantation avec un autre metteur), puis l'autorisation IC n'est plus considr comme valide et l'ID de IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur demandeur en sera responsable pour rvaluer le produit final (y compris l'metteur) et l'obtention d'un IC spare l'autorisation. tiquetage des produits de fin Ce module metteur est autoris uniquement pour une utilisation dans le dispositif o l'antenne peut tre installe de telle sorte que 20 cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible par le texte suivant: "Contient des IC:
466D-SDGOB291". Manuel d'information l'utilisateur final L'intgrateur demandeur doit tre conscient de ne pas fournir des informations l'utilisateur final en ce qui concerne la faon d'installer ou de retirer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel utilisateur final doit inclure toutes les informations rglementaires requises /
avertissement comme le montrent dans ce manuel. Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 19 B.3 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide Taiwan Doc. No. MV-SR00222-13 Rev. Page 20 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 EuropeEU Declaration of Conformity B.4 EuropeEU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1: 2006 Safety of Information Technology Equipment EN 62311: 2008
Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) EN 300 328 V1.7.1: (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489-1 V1.8.1: (2008-04) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V1.3.2 (2008-04) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 21 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide Cesky
[Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English Espaol
[Spanish]
[Jmno vrobce] tmto prohlauje, e tento [typ zarzen] je ve shode se zkladnmi poadavky a dalmi prslunmi ustanovenmi smernice 1999/5/ES. Undertegnede [fabrikantens navn] erklrer herved, at flgende udstyr [udstyrets typebetegnelse] overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt [Name des Herstellers], dass sich das Gert [Gertetyp] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tp
= type of equipment] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [nombre del fabricante] declara que el [clase de equipo]
cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Franais
[French]
Italiano
[Italian]
Latviski
[Latvian]
Lietuviu
[Lithuanian]
Nederlands
[Dutch]
Malti
[Maltese]
Magyar
[Hungarian]
Polski
[Polish]
Portugus
[Portuguese]
Par la prsente [nom du fabricant] dclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio]
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o [name of manufacturer / izgatavotaja nosaukums] deklare, ka [type of equipment / iekartas tips] atbilst Direktivas 1999/5/EK butiskajam prasibam un citiem ar to saistitajiem noteikumiem. iuo [manufacturer name] deklaruoja, kad is [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Alulrott, [gyrt neve] nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym [nazwa producenta] oswiadcza, ze [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostalymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[Nome do fabricante] declara que este [tipo de equipamento] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Doc. No. MV-SR00222-13 Rev. Page 22 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 EuropeEU Declaration of Conformity Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
Svenska
[Swedish]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolocili direktive 1999/5/ES.
[Meno vrobcu] tmto vyhlasuje, e [typ zariadenia] splna zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.
[Valmistaja = manufacturer] vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar [fretag] att denna [utrustningstyp] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 23 B.5 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide JapanVCCI (Class B) Compliance Statement for Users Doc. No. MV-SR00222-13 Rev. Page 24 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 B.6 KoreaNotice to Users KoreaNotice to Users Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 25 SP88W8782UMA0 2.4 GHz v2.0 (SDGOB-1291, 1150-7959) User Guide THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SR00222-13 Rev. Page 26 Document Classification: Proprietary Copyright 2012 Marvell February 3, 2012, 1.00 C Revision History Table 10: Revision History Document Type Document Revision First release. Rev. Copyright 2012 Marvell February 3, 2012, 1.00 Document Classification: Proprietary Doc. No. MV-SR00222-13 Rev. Page 27 Back Cover Marvell Semiconductor, Inc. 5488 Marvell Lane Santa Clara, CA 95054, USA Tel: 1.408.222.2500 Fax: 1.408.752.9028 www.marvell.com Marvell. Moving Forward Faster
1 2 | Manual 28 | Users Manual | 459.73 KiB |
Cover SP88W8782-MA0 2.4 GHz v2.0
(HP SDGOB-1292, 1150-7962) WLAN Module IEEE 802.11n/g/b User Guide Regulatory Use Only Doc. No. MV-SM00001-00, Rev. April 26, 2012 CONFIDENTIAL Document Classification: Restricted Marvell. Moving Forward Faster SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide Document Conventions Note: Provides related information or information of special importance. Technical Publication: 0.xx Document Status Doc Status: 1.00 Warning: Indicates a risk of personal injury. Caution: Indicates potential damage to hardware or software, or loss of data. Regulatory Use O nly Disclaimer No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of Marvell. Marvell retains the right to make changes to this document at any time, without notice. Marvell makes no warranty of any kind, expressed or implied, with regard to any information contained in this document, including, but not limited to, the implied warranties of merchantability or fitness for any particular purpose. Further, Marvell does not warrant the accuracy or completeness of the information, text, graphics, or other items contained within this document. Marvell products are not designed for use in life-support equipment or applications that would cause a life-threatening situation if any such products failed. Do not use Marvell products in these types of equipment or applications. With respect to the products described herein, the user or recipient, in the absence of appropriate U.S. government authorization, agrees:
1) Not to re-export or release any such information consisting of technology, software or source code controlled for national security reasons by the U.S. Export Control Regulations ("EAR"), to a national of EAR Country Groups D:1 or E:2;
2) Not to export the direct product of such technology or such software, to EAR Country Groups D:1 or E:2, if such technology or software and direct products thereof are controlled for national security reasons by the EAR; and, 3) In the case of technology controlled for national security reasons under the EAR where the direct product of the technology is a complete plant or component of a plant, not to export to EAR Country Groups D:1 or E:2 the direct product of the plant or major component thereof, if such direct product is controlled for national security reasons by the EAR, or is subject to controls under the U.S. Munitions List ("USML"). At all times hereunder, the recipient of any such information agrees that they shall be deemed to have manually signed this document in connection with their receipt of any such information. Copyright 19992012. Marvell International Ltd. All rights reserved. M Logo, Marvell, Moving Forward Faster, Alaska, Link Street, Prestera, Virtual Cable Tester, Yukon, Datacom Systems On Silicon, AnyVoltage, DSP Switcher, Feroceon, ZX, ZXSTREAM, Armada, Qdeo & Design, QuietVideo, TopDog, TwinD, and Kinoma are registered trademarks of Marvell or its affiliates. Avanta, Avastar, Carrierspan, DragonFly, HyperDuo, HyperScale, Kirkwood, LinkCrypt, Marvell Smart, The World As You See It, Turbosan, and Vmeta are trademarks of Marvell or its affiliates. Patent(s) PendingProducts identified in this document may be covered by one or more Marvell patents and/or patent applications. For more information, visit our website at: www.marvell.com Doc. No. MV-SM00001-00 Rev. Page 2 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) WLAN Module PRODUCT OVERVIEW The Marvell SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) is an embedded WLAN 802.11n/g/b radio module. It is designed to be fixed inside a printer product through a multi-pin digital interface connector and mounting brackets. The module is intended to be factory installed into an enclosed product. The module is a PCB consisting of the Marvell 88W8782 1x1 SISO IEEE 802.11n/g/b WLAN SoC, host connector interface, RFIC switches, passive discrete components, and integrated passive printed circuit antennas. General Features
IEEE 802.11n/g/b compliant
Dual antenna supporting diversity
SDIO host interface Chipset
Marvell 88W8782 Security
WEP 64- and 128-bit encryption with hardware TKIP Regulatory Use O nly The embedded module operates under the control of the host printer in order to provide wireless network connectivity to other compatible devices using the IEEE 802.11n/g/b Wi-Fi standards. It is capable of operating in the 2.4122.472 GHz frequency band. The module requires DC power and configuration from the host printer in order to operate. Refer to the printers user manual for more details. Software
Linux supported with drivers based on Fedora
Up to 13 channels
64QAM/16QAM/QPSK/BPSK/CCK (OFDM, DSSS)
Up to 14 channels (Japan)
64QAM/16QAM/QPSK/BPSK/CCK (OFDM, DSSS) Up to 13 channels (HT20)
Up to 9 channels (HT40)
MCS0MCS7 (OFDM) Radio Characteristics
802.11n
AES-CCMP hardware implementation as part of This product is for indoor use only. 802.11i security standard (WPA2) processing (WPA)
802.11g
802.11b Core 13 Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 3 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide Figure 1 shows an overall block diagram. WLAN 802.11n/g/b Main Antenna
(2.4 GHz) CON1 Host Conn Figure 1: Block Diagram
(HP SDGOB-1292, 1150-7962 ) i
/
. 2 U3 U1 Y1 FLT1 A P CON4 Aux A N L ANT 3.3V 1.8V C A M
(2.4 GHz) SDIO SDIO SPDT C35, C36, C37 z H G 4 2 Z-Match z H G 4 2 1.2V LDO 1.8V LDO d n a b e s a B 88W8782 o d a R z H G 4 2 W S R T z H G 4 2.4 GHz Tx/Rx Low Pass Filter 40 MHz Crystal WLAN 802.11n/g/b Auxiliary Antenna SP88W8782 -MA0 2.4 GHz Regulatory Use O nly RF Test Conn Z-Match C44, C45, C46 Main ANT Doc. No. MV-SM00001-00 Rev. Page 4 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Table of Contents Table of Contents List of Tables ..............................................................................................................................................7 List of Figures.............................................................................................................................................6 Product Overview .......................................................................................................................................3 Table of Contents .......................................................................................................................................5 Theory of Operation ......................................................................................................................9 Signal Description .......................................................................................................................10 Pinout ..............................................................................................................................................................10 Pin List ............................................................................................................................................................11 Regulatory Use O nly Electrical Specifications .............................................................................................................13 Absolute Maximum Ratings ............................................................................................................................13 Operating Conditions ......................................................................................................................................14 WLAN RF Specifications.................................................................................................................................15 Receive Mode Specification2.4 GHz.............................................................................................15 3.3.1 3.3.2 Transmit Mode Specification2.4 GHz............................................................................................16 WLAN Functions .............................................................................................................................................17 3.4.1 WLAN Data Rates ............................................................................................................................17 Regulatory Conformance............................................................................................................21 Revision History ..........................................................................................................................33 Mechanical Drawing ....................................................................................................................19 Regulatory Statements ..............................................................................................................22 1 2 2.1 2.2 3 3.1 3.2 3.3 3.4 4 A B C Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 5 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide List of Figures 1 2 3 A B C 4 Mechanical Drawing ........................................................................................................................ 19 Figure 3: Mechanical DrawingSP88W8782MA0 (2.4 GHz)..........................................................................19 Product Overview .......................................................................................................................................3 Block Diagram ....................................................................................................................................4 Theory of Operation .......................................................................................................................... 9 Revision History ...............................................................................................................................33 Regulatory Conformance.................................................................................................................21 Regulatory Statements ....................................................................................................................22 Electrical Specifications ................................................................................................................. 13 Signal Description ........................................................................................................................... 10 Figure 2:
Pin Diagram ......................................................................................................................................10 Figure 1:
Regulatory Use O nly Doc. No. MV-SM00001-00 Rev. Page 6 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 List of Tables List of Tables 1 2 3 A B C 4 Mechanical Drawing .........................................................................................................................19 Theory of Operation ...........................................................................................................................9 Signal Description ............................................................................................................................10 Pin List ..............................................................................................................................................11 Table 1:
Electrical Specifications ..................................................................................................................13 Table 2:
Absolute Maximum Ratings ..............................................................................................................13 Operating Conditions ........................................................................................................................14 Table 3:
802.11n Rx ModeReceive Sensitivity (2.4 GHz) ...........................................................................15 Table 4:
802.11g/b Rx ModeReceive Sensitivity (2.4 GHz) ........................................................................15 Table 5:
Table 6:
802.11n Tx ModeTransmit Power (2.4 GHz).................................................................................16 802.11g/b Tx ModeTransmit Power (2.4 GHz)..............................................................................16 Table 7:
WLAN Data Rates ............................................................................................................................17 Table 8:
Table 9:
MCS Index ........................................................................................................................................17 Regulatory Use O nly Revision History ...............................................................................................................................33 Table 10: Revision History................................................................................................................................33 Regulatory Statements ....................................................................................................................22 Regulatory Conformance.................................................................................................................21 Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 7 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00001-00 Rev. Page 8 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Theory of Operation 1 Theory of Operation The Marvell SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) IEEE 802.11n/g/b WLAN client module is a low cost, low part count, complete, and ready-to-manufacture solution using a standard SDIO interface. The design architecture includes the Marvell 88W8782, a highly integrated WLAN System-on-Chip (SoC), specifically designed to support high throughput data rates for next generation WLAN products. The device is designed to support IEEE 802.11n/g/b payload data rates. The module provides the combined functions of the IEEE Standard 802.11/802.11b Direct Sequence Spread Spectrum (DSSS), 802.11g and 802.11n Orthogonal Frequency Division Multiplexing
(OFDM), baseband modulation, Medium Access Controller (MAC) with support for multiple BSS and multiple station modes, CPU, memory, host interface, direct-conversion WLAN RF radio, and Bluetooth coexistence on a single integrated chip. Also included are an integrated 2.4 GHz power amplifier and an integrated 2.4 GHz transmit/receive switch. The transceiver architecture design is equipped with a fully integrated RF-to-baseband radio that operates in the 2.4 GHz ISM radio band for 802.11 applications. For optimum performance, the gain adjustments of the integrated LNAs and AGCs on the receive paths are seamlessly controlled by baseband functions. The transmitters up-convert their quadrature baseband signals and deliver the signals to a fully integrated internal power amplifier for radio band transmission. One external Single Pole Double Throw (SPDT) switch provides antenna diversity. 2.4 GHz T/R switching is provided by an integrated T/R switch. Regulatory Use O nly The 40 MHz crystal provides the SoC with the reference frequency. Local oscillator frequencies are generated by a fully integrated programmable frequency synthesizer with no external components. The loop bandwidth is optimized for phase noise and dynamic performance and quadrature signals are generated on-chip. The chip architecture also includes integrated One-Time Programmable (OTP) memory for storing calibration and wireless module configuration parameters such as the MAC address. An optional external serial memory chip may also be used to store firmware, calibration data, and wireless module configuration parameters. For security, the 88W8782 supports IEEE 802.11i security standards through the implementation of the Advanced Encryption Standard (AES)/Counter Mode CBC-MAC Protocol (CCMP) and Wired Equivalent Privacy (WEP) with Temporal Key Integrity Protocol (TKIP) security mechanisms. For video, voice, and multimedia applications, 802.11e Quality of Service (QoS) is supported. Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 9 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide 2 2.1 Figure 2: Pin Diagram 1 3 5 7 9 11 VIO GND VDD33 SD_CMD SD_DAT[3]
SD_DAT[1]
Pinout Signal Description Regulatory Use O nly Straight Connector (Bottom Side View) PDn/RESETn SD_DAT[2]
SD_DAT[0]
SD_CLK GND GND 12 10 8 6 4 2 Doc. No. MV-SM00001-00 Rev. Page 10 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 2.2 Pin List Signal Description Pin List 6 5 4 3 2 1 9 8 7 10 GND GND GND Pin#
VDD33 SD_CLK SD_CMD SD_DAT[0]
SD_DAT[3]
SD_DAT[1]
Pin List Table 1:
Pin Name Regulatory Use O nly PDn/RESETn SD_DAT[2]
VIO 12 11 Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 11 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00001-00 Rev. Page 12 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Electrical Specifications Absolute Maximum Ratings 3 3.1 U nits Table 2: Absolute Maximum Ratings Symbol VDD33 VIO IDD33 TSTORAGE HSTORAGE V V
--
--
--
--
2.2 3.3 4.1 3.3 4.0 1.8 Typ Min Max P arameter SDIO Power Supply SDIO Power Supply Storage Temperature VDD33 Max Current Rating Absolute Maximum Ratings Electrical Specifications Regulatory Use O nly Storage Humidity 90%
95%
500 125
-55
--
--
--
mA C RH Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 13 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide 3.2 Operating Conditions Units V V C MHz Table 3: Operating Conditions Symbol VDD33 VIO TA fclock 5
--
--
--
40 60 3.3 1.8 3.3 2.97 1.62 2.97 3.63 3.63 1.98 Typ Min Max Parameter SDIO Power Supply SDIO Power Supply Reference Clock Frequency Ambient Operating Temperature Regulatory Use O nly Doc. No. MV-SM00001-00 Rev. Page 14 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 3.3 WLAN RF Specifications Electrical Specifications WLAN RF Specifications U nits dBm U nits dBm 1 Mbps 6 Mbps 11 Mbps 54 Mbps 3.3.1 Table 4:
Parameter MCS7 MCS7 Table 5:
Parameter
--
--
--
--
-71
-68
-97 Typ Typ Min Min Max Max Receive Mode Specification2.4 GHz C ondition C ondition 802.11b, PER<8%
802.11b, PER<8%
802.11g, PER<10%
802.11n, 40 MHz, PER<10%
802.11n, 20 MHz, PER<10%
802.11n Rx ModeReceive Sensitivity (2.4 GHz) 802.11g/b Rx ModeReceive Sensitivity (2.4 GHz) Regulatory Use O nly 802.11g, PER<10%
-85
-90
-75
--
--
--
--
--
--
--
--
Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 15 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide 3.3.2 Transmit Mode Specification2.4 GHz U nits dBm U nits dBm Table 7:
Table 6:
Parameter MCS02 MCS35 MCS67 MCS02 MCS35 MCS67 12 12 14 13 13 15 11.5 11.5 Typ 16.5 14.5 14.5 13.5 13.5 15.5 13.5 10.5 10.5 12.5 Min Max C ondition C ondition 802.11n, 20 MHz 802.11n, 40 MHz 802.11n, 40 MHz 802.11n, 40 MHz 802.11n, 20 MHz 802.11n, 20 MHz 802.11n Tx ModeTransmit Power (2.4 GHz) 802.11g/b Tx ModeTransmit Power (2.4 GHz) Regulatory Use O nly 802.11b 802.11g 802.11g 802.11g Max Min 16.5 19.5 14.5 17.5 14.5 17.5 13.5 16.5 Typ 16 16 15 18 Parameter 111 Mbps 618 Mbps 2436 Mbps 4854 Mbps Doc. No. MV-SM00001-00 Rev. Page 16 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 3.4 WLAN Functions Electrical Specifications WLAN Functions 3.4.1 WLAN Data Rates Table 9: MCS Index MCS Index Modulation Units Index Mbps Mbps Mode Rates 802.11b 802.11g 802.11n 1, 2, 5.5, 11 Code Rate frequency bands. MCS0MCS71 6, 9, 12, 18, 24, 36, 48, 54 Table 8: WLAN Data Rates 1. MCS is an index for PHY rates in 802.11n mode which applies to both 2.4 GHz and 5 GHz Regulatory Use O nly Data Rates (Mbps) 400 ns GI 800 ns G I 800 ns G I 16QAM 64QAM HT20 HT40 QPSK BPSK 121.3 14.4 21.7 28.9 57.8 72.2 43.3 13.5 19.5 40.5 58.5 120 135 150 108 135 1/2 7.2 1/2 3/4 1/2 2/3 3/4 5/6 3/4 6.5 15 90 30 45 60 65 13 27 26 54 52 65 81 39 400 ns GI 0 1 2 3 4 5 6 7 Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 17 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00001-00 Rev. Page 18 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Mechanical Drawing 4 Mechanical Drawing i f
, n o 1 2 e g a p e g a k c a p r o Regulatory Use O nly g n k r a M e g a k c a P g n i r e b m u N i s n o s n e m d i t c e S e e S g n k r a m r e d r O m m n e t o N t r a P
) z H G 4
. 2
(
0 A M 2 8 7 8 W 8 8 P S g n w a r D n o l l A
, 5
i
.
/
. i i i l i a c n a h c e M
:
3 e r u g F i Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 19 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00001-00 Rev. Page 20 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Product Regulatory Compliance A.1 A.2 A Regulatory Conformance Europe Region Standards United States Certificates EN 300 328 v1.7.1 (2006-10), EN 301 893 v1.5.1 Intentional Radiator Conformance The module has been tested and certified as an intentional radiator to the following standards:
Product Regulatory Compliance The module is intended to be factory installed into an enclosed product. Final product regulatory testing will be required to satisfy non-intentional radiator compliance, susceptibility, and safety standards. The module has been designed not to adversely affect this testing. Regulatory Use O nly Korea Communication Commission (KCC) Notification No.: 2010-16 ICES-003 Verification / Industry Canada Certificate Japan MIC Article 2, Clause 1, Item 19 RSS-210, Issue 6, RSS-GEN FCC Verification / FCC Grant FCC Part 15, Subpart C NCC Certificate KCC Certificate MIC Certificate NCC LP0002 Certificates Canada Taiwan Japan Korea Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 21 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide B.1 B Regulatory Statements Note This section contains regulatory information as stated exactly in the FCC regulatory statement. Federal Communication Commission Interface
(FCC) Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Regulatory Use O nly This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from that to which the receiver is This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the built-in collocated transmitters. This device is intended only for Applicant integrators under the following conditions:
Increase the separation between the equipment and receiver. connected. 1)The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2)For all products market in US, Applicant has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. Applicant shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required. However, the Applicant integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Doc. No. MV-SM00001-00 Rev. Page 22 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Federal Communication Commission Interface (FCC) Compliance IMPORTANT NOTE:
The end user manual shall include all required regulatory information/warning as shown in this manual. The Applicant integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: B94SDGOB1291. Manual Information To the End User In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the Applicant integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling Regulatory Use O nly Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 23 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide B.2 Canadian Regulatory Wireless Notice B.2.1 IC Radiation Exposure Statement:
1) this device may not cause interference and This device is intended only for Applicant integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and English This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 2) For all products market in IC, Applicant has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. Applicant shall not supply any tool or info to the end-user regarding to Regulatory Domain change. 2) this device must accept any interference, including interference that may cause undesired operation of the device IMPORTANT NOTE:
Regulatory Use O nly As long as 2 conditions above are met, further transmitter test will not be required. However, the Applicant integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the Applicant integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. The Applicant integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 466D-SDGOB291. The end user manual shall include all required regulatory information/warning as show in this manual. Manual Information To the End User End Product Labeling Doc. No. MV-SM00001-00 Rev. Page 24 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Canadian Regulatory Wireless Notice B.2.2 French Cet appareil est conforme la norme RSS-210 des Rgles d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:
1) cet appareil ne peut pas provoquer d'interfrences et 1) L'antenne doit tre installe de telle sorte que 20 cm est mis jour entre l'antenne et les utilisateurs, et 2) Pour tous les produits du march dans l'IC, le demandeur doit limiter les canaux de coopration dans CH1 CH11 pour 2.4G bande par l'outil de programmation du firmware fourni. Demandeur ne doit pas fournir un outil ou d'informations l'utilisateur final en ce qui concerne le changement de domaine de la rglementation. Cet quipement est conforme l'exposition aux radiations IC limite dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec distance minimum de 20 cm entre le radiateur et votre corps. Cet appareil est conu uniquement pour les intgrateurs de demandeur dans les conditions suivantes:
2) cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil NOTE IMPORTANTE:
Dclaration IC d'exposition aux radiations:
Regulatory Use O nly Ce module metteur est autoris uniquement pour une utilisation dans le dispositif o l'antenne peut tre installe de telle sorte que 20 cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible par le texte suivant: "Contient des IC:
466D-SDGOB291". Manuel d'information l'utilisateur final Dans le cas o ces conditions ne peuvent pas tre respectes (par exemple certaines configurations d'ordinateurs portables ou de co-implantation avec un autre metteur), puis l'autorisation IC n'est plus considr comme valide et l'ID de IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur demandeur en sera responsable pour rvaluer le produit final (y compris l'metteur) et l'obtention d'un IC spare l'autorisation. Tant que 2 conditions ci-dessus sont remplies, le test autre metteur ne sera pas ncessaire. Toutefois, l'intgrateur demandeur est toujours responsable pour tester leur produit final pour toutes les exigences de conformit supplmentaires ncessaires avec ce module est install. NOTE IMPORTANTE:
L'intgrateur demandeur doit tre conscient de ne pas fournir des informations l'utilisateur final en ce qui concerne la faon d'installer ou de retirer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel utilisateur final doit inclure toutes les informations rglementaires requises /
avertissement comme le montrent dans ce manuel. tiquetage des produits de fin Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 25 B.3 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide Taiwan Regulatory Use O nly Doc. No. MV-SM00001-00 Rev. Page 26 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 EuropeEU Declaration of Conformity B.4
EuropeEU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1: 2006 Safety of Information Technology Equipment EN 62311: 2008
Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) EN 300 328 V1.7.1: (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489-1 V1.8.1: (2008-04) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V1.3.2 (2008-04) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment Regulatory Use O nly In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.
Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 27 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide English Espaol
[Spanish]
Deutsch
[German]
Eesti
[Estonian]
Cesky
[Czech]
Dansk
[Danish]
[Jmno vrobce] tmto prohlauje, e tento [typ zarzen] je ve shode se zkladnmi poadavky a dalmi prslunmi ustanovenmi smernice 1999/5/ES. Undertegnede [fabrikantens navn] erklrer herved, at flgende udstyr [udstyrets typebetegnelse] overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt [Name des Herstellers], dass sich das Gert [Gertetyp] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tp
= type of equipment] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [nombre del fabricante] declara que el [clase de equipo]
cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Regulatory Use O nly Par la prsente [nom du fabricant] dclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio]
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o [name of manufacturer / izgatavotaja nosaukums] deklare, ka [type of equipment / iekartas tips] atbilst Direktivas 1999/5/EK butiskajam prasibam un citiem ar to saistitajiem noteikumiem. iuo [manufacturer name] deklaruoja, kad is [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Alulrott, [gyrt neve] nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym [nazwa producenta] oswiadcza, ze [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostalymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[Nome do fabricante] declara que este [tipo de equipamento] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Magyar
[Hungarian]
Polski
[Polish]
Portugus
[Portuguese]
Lietuviu
[Lithuanian]
Nederlands
[Dutch]
Malti
[Maltese]
Franais
[French]
Latviski
[Latvian]
Italiano
[Italian]
Doc. No. MV-SM00001-00 Rev. Page 28 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 EuropeEU Declaration of Conformity Svenska
[Swedish]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolocili direktive 1999/5/ES.
[Meno vrobcu] tmto vyhlasuje, e [typ zariadenia] splna zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.
[Valmistaja = manufacturer] vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar [fretag] att denna [utrustningstyp] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Regulatory Use O nly Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 29 B.5 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide JapanVCCI (Class B) Compliance Statement for Users Regulatory Use O nly Doc. No. MV-SM00001-00 Rev. Page 30 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 KoreaNotice to Users B.6 KoreaNotice to Users Regulatory Use O nly Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 31 SP88W8782-MA0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7962) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00001-00 Rev. Page 32 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 C Revision History Table 10: Revision History Document Type First release. Rev. Document Revision Regulatory Use O nly Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00001-00 Rev. Page 33 Back Cover Marvell Semiconductor, Inc. 5488 Marvell Lane Santa Clara, CA 95054, USA Tel: 1.408.222.2500 Fax: 1.408.752.9028 www.marvell.com Marvell. Moving Forward Faster
1 2 | Manual 981 | Users Manual | 459.06 KiB |
Cover SP88W8782-MB0 2.4 GHz v2.0
(HP SDGOB-1292, 1150-7961) WLAN Module IEEE 802.11n/g/b User Guide Regulatory Use Only Doc. No. MV-SM00002-00, Rev. April 26, 2012 CONFIDENTIAL Document Classification: Restricted Marvell. Moving Forward Faster SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide Document Conventions Note: Provides related information or information of special importance. Technical Publication: 0.xx Document Status Doc Status: 1.00 Warning: Indicates a risk of personal injury. Caution: Indicates potential damage to hardware or software, or loss of data. Regulatory Use O nly Disclaimer No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of Marvell. Marvell retains the right to make changes to this document at any time, without notice. Marvell makes no warranty of any kind, expressed or implied, with regard to any information contained in this document, including, but not limited to, the implied warranties of merchantability or fitness for any particular purpose. Further, Marvell does not warrant the accuracy or completeness of the information, text, graphics, or other items contained within this document. Marvell products are not designed for use in life-support equipment or applications that would cause a life-threatening situation if any such products failed. Do not use Marvell products in these types of equipment or applications. With respect to the products described herein, the user or recipient, in the absence of appropriate U.S. government authorization, agrees:
1) Not to re-export or release any such information consisting of technology, software or source code controlled for national security reasons by the U.S. Export Control Regulations ("EAR"), to a national of EAR Country Groups D:1 or E:2;
2) Not to export the direct product of such technology or such software, to EAR Country Groups D:1 or E:2, if such technology or software and direct products thereof are controlled for national security reasons by the EAR; and, 3) In the case of technology controlled for national security reasons under the EAR where the direct product of the technology is a complete plant or component of a plant, not to export to EAR Country Groups D:1 or E:2 the direct product of the plant or major component thereof, if such direct product is controlled for national security reasons by the EAR, or is subject to controls under the U.S. Munitions List ("USML"). At all times hereunder, the recipient of any such information agrees that they shall be deemed to have manually signed this document in connection with their receipt of any such information. Copyright 19992012. Marvell International Ltd. All rights reserved. M Logo, Marvell, Moving Forward Faster, Alaska, Link Street, Prestera, Virtual Cable Tester, Yukon, Datacom Systems On Silicon, AnyVoltage, DSP Switcher, Feroceon, ZX, ZXSTREAM, Armada, Qdeo & Design, QuietVideo, TopDog, TwinD, and Kinoma are registered trademarks of Marvell or its affiliates. Avanta, Avastar, Carrierspan, DragonFly, HyperDuo, HyperScale, Kirkwood, LinkCrypt, Marvell Smart, The World As You See It, Turbosan, and Vmeta are trademarks of Marvell or its affiliates. Patent(s) PendingProducts identified in this document may be covered by one or more Marvell patents and/or patent applications. For more information, visit our website at: www.marvell.com Doc. No. MV-SM00002-00 Rev. Page 2 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) WLAN Module PRODUCT OVERVIEW The Marvell SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) is an embedded WLAN 802.11n/g/b radio module. It is designed to be fixed inside a printer product through a multi-pin digital interface connector and mounting brackets. The module is intended to be factory installed into an enclosed product. The module is a PCB consisting of the Marvell 88W8782 1x1 SISO IEEE 802.11n/g/b WLAN SoC, host connector interface, RFIC switches, passive discrete components, and integrated passive printed circuit antennas. General Features
IEEE 802.11n/g/b compliant
Dual antenna supporting diversity
SDIO host interface Chipset
Marvell 88W8782 Security
WEP 64- and 128-bit encryption with hardware TKIP Regulatory Use O nly The embedded module operates under the control of the host printer in order to provide wireless network connectivity to other compatible devices using the IEEE 802.11n/g/b Wi-Fi standards. It is capable of operating in the 2.4122.472 GHz frequency band. The module requires DC power and configuration from the host printer in order to operate. Refer to the printers user manual for more details. Software
Linux supported with drivers based on Fedora
Up to 13 channels
64QAM/16QAM/QPSK/BPSK/CCK (OFDM, DSSS)
Up to 14 channels (Japan)
64QAM/16QAM/QPSK/BPSK/CCK (OFDM, DSSS) Up to 13 channels (HT20)
Up to 9 channels (HT40)
MCS0MCS7 (OFDM) Radio Characteristics
802.11n
AES-CCMP hardware implementation as part of This product is for indoor use only. 802.11i security standard (WPA2) processing (WPA)
802.11g
802.11b Core 13 Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 3 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide Figure 1 shows an overall block diagram. WLAN 802.11n/g/b Main Antenna
(2.4 GHz) Figure 1: Block Diagram CON1 Host Conn
(HP SDGOB-1292, 1150-7961 ) i
.
/
2 U1 U3 Y1 FLT1 A P CON4 Aux A N L ANT 3.3V 1.8V C A M
(2.4 GHz) SDIO SDIO SPDT C35, C36, C37 z H G 4 2 Z-Match z H G 4
. 2 1.2V LDO 1.8V LDO d n a b e s a B 88W8782 o d a R z H G 4 2 W S R T z H G 4 2.4 GHz Tx/Rx Low Pass Filter 40 MHz Crystal SP88W8782 -MB0 2.4 GHz WLAN 802.11n/g/b Auxiliary Antenna Regulatory Use O nly RF Test Conn Z-Match C44, C45, C46 Main ANT Doc. No. MV-SM00002-00 Rev. Page 4 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Table of Contents Table of Contents List of Tables ..............................................................................................................................................7 List of Figures.............................................................................................................................................6 Product Overview .......................................................................................................................................3 Table of Contents .......................................................................................................................................5 Theory of Operation ......................................................................................................................9 Signal Description .......................................................................................................................10 Pinout ..............................................................................................................................................................10 Pin List ............................................................................................................................................................11 Regulatory Use O nly Electrical Specifications .............................................................................................................13 Absolute Maximum Ratings ............................................................................................................................13 Operating Conditions ......................................................................................................................................14 WLAN RF Specifications.................................................................................................................................15 Receive Mode Specification2.4 GHz.............................................................................................15 3.3.1 3.3.2 Transmit Mode Specification2.4 GHz............................................................................................16 WLAN Functions .............................................................................................................................................17 3.4.1 WLAN Data Rates ............................................................................................................................17 Regulatory Conformance............................................................................................................21 Revision History ..........................................................................................................................33 Mechanical Drawing ....................................................................................................................19 Regulatory Statements ..............................................................................................................22 1 2 2.1 2.2 3 3.1 3.2 3.3 3.4 4 A B C Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 5 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide List of Figures 1 2 3 A B C 4 Mechanical Drawing ........................................................................................................................ 19 Figure 3: Mechanical DrawingSP88W8782MB0 (2.4 GHz)..........................................................................19 Product Overview .......................................................................................................................................3 Block Diagram ....................................................................................................................................4 Theory of Operation .......................................................................................................................... 9 Revision History ...............................................................................................................................33 Regulatory Conformance.................................................................................................................21 Regulatory Statements ....................................................................................................................22 Electrical Specifications ................................................................................................................. 13 Signal Description ........................................................................................................................... 10 Figure 2:
Pin Diagram ......................................................................................................................................10 Figure 1:
Regulatory Use O nly Doc. No. MV-SM00002-00 Rev. Page 6 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 List of Tables List of Tables 1 2 3 A B C 4 Mechanical Drawing .........................................................................................................................19 Theory of Operation ...........................................................................................................................9 Signal Description ............................................................................................................................10 Pin List ..............................................................................................................................................11 Table 1:
Electrical Specifications ..................................................................................................................13 Table 2:
Absolute Maximum Ratings ..............................................................................................................13 Operating Conditions ........................................................................................................................14 Table 3:
802.11n Rx ModeReceive Sensitivity (2.4 GHz) ...........................................................................15 Table 4:
802.11g/b Rx ModeReceive Sensitivity (2.4 GHz) ........................................................................15 Table 5:
Table 6:
802.11n Tx ModeTransmit Power (2.4 GHz).................................................................................16 802.11g/b Tx ModeTransmit Power (2.4 GHz)..............................................................................16 Table 7:
WLAN Data Rates ............................................................................................................................17 Table 8:
Table 9:
MCS Index ........................................................................................................................................17 Regulatory Use O nly Revision History ...............................................................................................................................33 Table 10: Revision History................................................................................................................................33 Regulatory Statements ....................................................................................................................22 Regulatory Conformance.................................................................................................................21 Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 7 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00002-00 Rev. Page 8 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Theory of Operation 1 Theory of Operation The Marvell SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) IEEE 802.11n/g/b WLAN client module is a low cost, low part count, complete, and ready-to-manufacture solution using a standard SDIO interface. The design architecture includes the Marvell 88W8782, a highly integrated WLAN System-on-Chip (SoC), specifically designed to support high throughput data rates for next generation WLAN products. The device is designed to support IEEE 802.11n/g/b payload data rates. The module provides the combined functions of the IEEE Standard 802.11/802.11b Direct Sequence Spread Spectrum (DSSS), 802.11g and 802.11n Orthogonal Frequency Division Multiplexing
(OFDM), baseband modulation, Medium Access Controller (MAC) with support for multiple BSS and multiple station modes, CPU, memory, host interface, direct-conversion WLAN RF radio, and Bluetooth coexistence on a single integrated chip. Also included are an integrated 2.4 GHz power amplifier and an integrated 2.4 GHz transmit/receive switch. The transceiver architecture design is equipped with a fully integrated RF-to-baseband radio that operates in the 2.4 GHz ISM radio band for 802.11 applications. For optimum performance, the gain adjustments of the integrated LNAs and AGCs on the receive paths are seamlessly controlled by baseband functions. The transmitters up-convert their quadrature baseband signals and deliver the signals to a fully integrated internal power amplifier for radio band transmission. One external Single Pole Double Throw (SPDT) switch provides antenna diversity. 2.4 GHz T/R switching is provided by an integrated T/R switch. Regulatory Use O nly The 40 MHz crystal provides the SoC with the reference frequency. Local oscillator frequencies are generated by a fully integrated programmable frequency synthesizer with no external components. The loop bandwidth is optimized for phase noise and dynamic performance and quadrature signals are generated on-chip. The chip architecture also includes integrated One-Time Programmable (OTP) memory for storing calibration and wireless module configuration parameters such as the MAC address. An optional external serial memory chip may also be used to store firmware, calibration data, and wireless module configuration parameters. For security, the 88W8782 supports IEEE 802.11i security standards through the implementation of the Advanced Encryption Standard (AES)/Counter Mode CBC-MAC Protocol (CCMP) and Wired Equivalent Privacy (WEP) with Temporal Key Integrity Protocol (TKIP) security mechanisms. For video, voice, and multimedia applications, 802.11e Quality of Service (QoS) is supported. Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 9 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide 2 2.1 Figure 2: Pin Diagram 7 5 3 1 9 11 VIO GND VDD33 SD_CMD SD_DAT[1]
SD_DAT[3]
Pinout Signal Description Regulatory Use O nly Right-Angle Connector (Top ) PDn/RESETn SD_DAT[0]
SD_DAT[2]
SD_CLK GND GND 10 12 2 4 6 8 Doc. No. MV-SM00002-00 Rev. Page 10 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 2.2 Pin List Signal Description Pin List 6 5 4 3 2 1 9 8 7 10 GND GND GND Pin#
VDD33 SD_CLK SD_CMD SD_DAT[0]
SD_DAT[3]
SD_DAT[1]
Pin List Table 1:
Pin Name Regulatory Use O nly PDn/RESETn SD_DAT[2]
VIO 12 11 Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 11 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00002-00 Rev. Page 12 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Electrical Specifications Absolute Maximum Ratings 3 3.1 U nits Table 2: Absolute Maximum Ratings Symbol VDD33 VIO IDD33 TSTORAGE HSTORAGE V V
--
--
--
--
2.2 3.3 4.1 3.3 4.0 1.8 Typ Min Max P arameter SDIO Power Supply SDIO Power Supply Storage Temperature VDD33 Max Current Rating Absolute Maximum Ratings Electrical Specifications Regulatory Use O nly Storage Humidity 90%
95%
500 125
-55
--
--
--
mA C RH Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 13 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide 3.2 Operating Conditions Units V V C MHz Table 3: Operating Conditions Symbol VDD33 VIO TA fclock 5
--
--
--
40 60 3.3 1.8 3.3 2.97 1.62 2.97 3.63 3.63 1.98 Typ Min Max Parameter SDIO Power Supply SDIO Power Supply Reference Clock Frequency Ambient Operating Temperature Regulatory Use O nly Doc. No. MV-SM00002-00 Rev. Page 14 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 3.3 WLAN RF Specifications Electrical Specifications WLAN RF Specifications U nits dBm U nits dBm 1 Mbps 6 Mbps 11 Mbps 54 Mbps 3.3.1 Table 4:
Parameter MCS7 MCS7 Table 5:
Parameter
--
--
--
--
-71
-68
-97 Typ Typ Min Min Max Max Receive Mode Specification2.4 GHz C ondition C ondition 802.11b, PER<8%
802.11b, PER<8%
802.11g, PER<10%
802.11n, 40 MHz, PER<10%
802.11n, 20 MHz, PER<10%
802.11n Rx ModeReceive Sensitivity (2.4 GHz) 802.11g/b Rx ModeReceive Sensitivity (2.4 GHz) Regulatory Use O nly 802.11g, PER<10%
-85
-90
-75
--
--
--
--
--
--
--
--
Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 15 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide 3.3.2 Transmit Mode Specification2.4 GHz U nits dBm U nits dBm Table 7:
Table 6:
Parameter MCS02 MCS35 MCS67 MCS02 MCS35 MCS67 12 12 14 13 13 15 11.5 11.5 Typ 16.5 14.5 14.5 13.5 13.5 15.5 13.5 10.5 10.5 12.5 Min Max C ondition C ondition 802.11n, 20 MHz 802.11n, 40 MHz 802.11n, 40 MHz 802.11n, 40 MHz 802.11n, 20 MHz 802.11n, 20 MHz 802.11n Tx ModeTransmit Power (2.4 GHz) 802.11g/b Tx ModeTransmit Power (2.4 GHz) Regulatory Use O nly 802.11b 802.11g 802.11g 802.11g Max Min 16.5 19.5 14.5 17.5 14.5 17.5 13.5 16.5 Typ 16 16 15 18 Parameter 111 Mbps 618 Mbps 2436 Mbps 4854 Mbps Doc. No. MV-SM00002-00 Rev. Page 16 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 3.4 WLAN Functions Electrical Specifications WLAN Functions 3.4.1 WLAN Data Rates Table 9: MCS Index MCS Index Modulation Units Index Mbps Mbps Mode Rates 802.11b 802.11g 802.11n 1, 2, 5.5, 11 Code Rate frequency bands. MCS0MCS71 6, 9, 12, 18, 24, 36, 48, 54 Table 8: WLAN Data Rates 1. MCS is an index for PHY rates in 802.11n mode which applies to both 2.4 GHz and 5 GHz Regulatory Use O nly Data Rates (Mbps) 400 ns GI 800 ns G I 800 ns G I 16QAM 64QAM HT20 HT40 QPSK BPSK 121.3 14.4 21.7 28.9 57.8 72.2 43.3 13.5 19.5 40.5 58.5 120 135 150 108 135 1/2 7.2 1/2 3/4 1/2 2/3 3/4 5/6 3/4 6.5 15 90 30 45 60 65 13 27 26 54 52 65 81 39 400 ns GI 0 1 2 3 4 5 6 7 Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 17 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00002-00 Rev. Page 18 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Mechanical Drawing 4 Mechanical Drawing i f
, n o 1 2 e g a p e g a k c a p r o Regulatory Use O nly g n k r a M e g a k c a P g n i r e b m u N i s n o s n e m d i t c e S e e S g n k r a m r e d r O m m n e t o N t r a P
) z H G 4
. 2
(
0 B M 2 8 7 8 W 8 8 P S g n w a r D n o l l A
, 5
i
.
/
. i i i l i a c n a h c e M
:
3 e r u g F i Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 19 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00002-00 Rev. Page 20 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Product Regulatory Compliance A.1 A.2 A Regulatory Conformance Europe Region Standards United States Certificates EN 300 328 v1.7.1 (2006-10), EN 301 893 v1.5.1 Intentional Radiator Conformance The module has been tested and certified as an intentional radiator to the following standards:
Product Regulatory Compliance The module is intended to be factory installed into an enclosed product. Final product regulatory testing will be required to satisfy non-intentional radiator compliance, susceptibility, and safety standards. The module has been designed not to adversely affect this testing. Regulatory Use O nly Korea Communication Commission (KCC) Notification No.: 2010-16 ICES-003 Verification / Industry Canada Certificate Japan MIC Article 2, Clause 1, Item 19 RSS-210, Issue 6, RSS-GEN FCC Verification / FCC Grant FCC Part 15, Subpart C NCC Certificate KCC Certificate MIC Certificate NCC LP0002 Certificates Canada Taiwan Japan Korea Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 21 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide B.1 B Regulatory Statements Note This section contains regulatory information as stated exactly in the FCC regulatory statement. Federal Communication Commission Interface
(FCC) Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Regulatory Use O nly This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from that to which the receiver is This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the built-in collocated transmitters. This device is intended only for Applicant integrators under the following conditions:
Increase the separation between the equipment and receiver. connected. 1)The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2)For all products market in US, Applicant has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. Applicant shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required. However, the Applicant integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Doc. No. MV-SM00002-00 Rev. Page 22 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Federal Communication Commission Interface (FCC) Compliance IMPORTANT NOTE:
The end user manual shall include all required regulatory information/warning as shown in this manual. The Applicant integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: B94SDGOB1291. Manual Information To the End User In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the Applicant integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling Regulatory Use O nly Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 23 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide B.2 Canadian Regulatory Wireless Notice B.2.1 IC Radiation Exposure Statement:
1) this device may not cause interference and This device is intended only for Applicant integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and English This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. 2) For all products market in IC, Applicant has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. Applicant shall not supply any tool or info to the end-user regarding to Regulatory Domain change. 2) this device must accept any interference, including interference that may cause undesired operation of the device IMPORTANT NOTE:
Regulatory Use O nly As long as 2 conditions above are met, further transmitter test will not be required. However, the Applicant integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the Applicant integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. The Applicant integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 466D-SDGOB291. The end user manual shall include all required regulatory information/warning as show in this manual. Manual Information To the End User End Product Labeling Doc. No. MV-SM00002-00 Rev. Page 24 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 Canadian Regulatory Wireless Notice B.2.2 French Cet appareil est conforme la norme RSS-210 des Rgles d'Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes:
1) cet appareil ne peut pas provoquer d'interfrences et 1) L'antenne doit tre installe de telle sorte que 20 cm est mis jour entre l'antenne et les utilisateurs, et 2) Pour tous les produits du march dans l'IC, le demandeur doit limiter les canaux de coopration dans CH1 CH11 pour 2.4G bande par l'outil de programmation du firmware fourni. Demandeur ne doit pas fournir un outil ou d'informations l'utilisateur final en ce qui concerne le changement de domaine de la rglementation. Cet quipement est conforme l'exposition aux radiations IC limite dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec distance minimum de 20 cm entre le radiateur et votre corps. Cet appareil est conu uniquement pour les intgrateurs de demandeur dans les conditions suivantes:
2) cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil NOTE IMPORTANTE:
Dclaration IC d'exposition aux radiations:
Regulatory Use O nly Ce module metteur est autoris uniquement pour une utilisation dans le dispositif o l'antenne peut tre installe de telle sorte que 20 cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible par le texte suivant: "Contient des IC:
466D-SDGOB291". Manuel d'information l'utilisateur final Dans le cas o ces conditions ne peuvent pas tre respectes (par exemple certaines configurations d'ordinateurs portables ou de co-implantation avec un autre metteur), puis l'autorisation IC n'est plus considr comme valide et l'ID de IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur demandeur en sera responsable pour rvaluer le produit final (y compris l'metteur) et l'obtention d'un IC spare l'autorisation. Tant que 2 conditions ci-dessus sont remplies, le test autre metteur ne sera pas ncessaire. Toutefois, l'intgrateur demandeur est toujours responsable pour tester leur produit final pour toutes les exigences de conformit supplmentaires ncessaires avec ce module est install. NOTE IMPORTANTE:
L'intgrateur demandeur doit tre conscient de ne pas fournir des informations l'utilisateur final en ce qui concerne la faon d'installer ou de retirer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel utilisateur final doit inclure toutes les informations rglementaires requises /
avertissement comme le montrent dans ce manuel. tiquetage des produits de fin Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 25 B.3 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide Taiwan Regulatory Use O nly Doc. No. MV-SM00002-00 Rev. Page 26 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 EuropeEU Declaration of Conformity B.4
EuropeEU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1: 2006 Safety of Information Technology Equipment EN 62311: 2008
Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) EN 300 328 V1.7.1: (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489-1 V1.8.1: (2008-04) Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EN 301 489-17 V1.3.2 (2008-04) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment Regulatory Use O nly In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France. This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.
Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 27 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide English Espaol
[Spanish]
Deutsch
[German]
Eesti
[Estonian]
Cesky
[Czech]
Dansk
[Danish]
[Jmno vrobce] tmto prohlauje, e tento [typ zarzen] je ve shode se zkladnmi poadavky a dalmi prslunmi ustanovenmi smernice 1999/5/ES. Undertegnede [fabrikantens navn] erklrer herved, at flgende udstyr [udstyrets typebetegnelse] overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Hiermit erklrt [Name des Herstellers], dass sich das Gert [Gertetyp] in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Kesolevaga kinnitab [tootja nimi = name of manufacturer] seadme [seadme tp
= type of equipment] vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [name of manufacturer], declares that this [type of equipment] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por medio de la presente [nombre del fabricante] declara que el [clase de equipo]
cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Regulatory Use O nly Par la prsente [nom du fabricant] dclare que l'appareil [type d'appareil] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Con la presente [nome del costruttore] dichiara che questo [tipo di apparecchio]
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Ar o [name of manufacturer / izgatavotaja nosaukums] deklare, ka [type of equipment / iekartas tips] atbilst Direktivas 1999/5/EK butiskajam prasibam un citiem ar to saistitajiem noteikumiem. iuo [manufacturer name] deklaruoja, kad is [equipment type] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Hierbij verklaart [naam van de fabrikant] dat het toestel [type van toestel] in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, [isem tal-manifattur], jiddikjara li dan [il-mudel tal-prodott] jikkonforma mal-htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Alulrott, [gyrt neve] nyilatkozom, hogy a [... tpus] megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Niniejszym [nazwa producenta] oswiadcza, ze [nazwa wyrobu] jest zgodny z zasadniczymi wymogami oraz pozostalymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[Nome do fabricante] declara que este [tipo de equipamento] est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Magyar
[Hungarian]
Polski
[Polish]
Portugus
[Portuguese]
Lietuviu
[Lithuanian]
Nederlands
[Dutch]
Malti
[Maltese]
Franais
[French]
Latviski
[Latvian]
Italiano
[Italian]
Doc. No. MV-SM00002-00 Rev. Page 28 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 EuropeEU Declaration of Conformity Svenska
[Swedish]
Slovensko
[Slovenian]
Slovensky
[Slovak]
Suomi
[Finnish]
[Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolocili direktive 1999/5/ES.
[Meno vrobcu] tmto vyhlasuje, e [typ zariadenia] splna zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.
[Valmistaja = manufacturer] vakuuttaa tten ett [type of equipment = laitteen tyyppimerkint] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar [fretag] att denna [utrustningstyp] str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Regulatory Use O nly Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 29 B.5 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide JapanVCCI (Class B) Compliance Statement for Users Regulatory Use O nly Doc. No. MV-SM00002-00 Rev. Page 30 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 KoreaNotice to Users B.6 KoreaNotice to Users Regulatory Use O nly Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 31 SP88W8782-MB0 2.4 GHz v2.0 (HP SDGOB-1292, 1150-7961) User Guide Regulatory Use O nly THIS PAGE INTENTIONALLY LEFT BLANK Doc. No. MV-SM00002-00 Rev. Page 32 CONFIDENTIAL Document Classification: Restricted Copyright 2012 Marvell April 26, 2012, 1.00 C Revision History Table 10: Revision History Document Type First release. Rev. Document Revision Regulatory Use O nly Copyright 2012 Marvell April 26, 2012, 1.00 CONFIDENTIAL Document Classification: Restricted Doc. No. MV-SM00002-00 Rev. Page 33 Back Cover Marvell Semiconductor, Inc. 5488 Marvell Lane Santa Clara, CA 95054, USA Tel: 1.408.222.2500 Fax: 1.408.752.9028 www.marvell.com Marvell. Moving Forward Faster
1 2 | Agent Authorization | Cover Letter(s) | 25.40 KiB |
Designation of T hir d Par ty R epr esentative B y A uthor ized A gent of H ewlett-Packar d C ompany 1. I am an authorized agent and representative of Hewlett-Packard Company together with its subsidiaries and affiliates (collectively, HP), designated as such by David P. Adams as HPs Applicant/Grantee Contact of Record for the FCC, pursuant to his Authorization as attached hereto. My name, address and contact information appear below. Any questions about the scope of this Designation of Third Party Representative should be directed to me. Pursuant to this authority, I designate the third party identified below as HPs agent for the matters and applications specified below, for the term specified below, unless earlier terminated by HP. 2. a. Name, address and contact information of third party:
MiCOM Labs 440 Boulder Court, Suite 200, Pleasanton, CA 94566, USA Matters and applications covered (product and/or model identification, FCC ID where available):
b. Product name:
Model name:
FCC ID:
802.11 b/g/n WLAN Module SDGOB-1292 B94SDGOB1291 c:
Term of designation, unless earlier terminated by HP: 1 year(s). 3. All invoices for FCCs services should be sent as specified in paragraph 2a, above. Licenses and test reports generated for HP should be sent as specified in paragraph 2a but copied to the undersigned. No access should be granted to any HP file or project information except as necessary in connection with the matters and applications specified in paragraph 2b. All acts carried out and requests made by the third party representative relating to any matter before the FCC, including requests for confidentiality, shall have the same effect as HPs own. Name:
Title:
Address:
Signature Julio Correa Product Regulations Engineer Hewlett-Packard Company Attention: Julio Correa, Mailstop 65-220 16399 West Bernardo Dr. San Diego, CA 92127-1899 858-655-3017 julio.correa@hp.com July 13, 2012 Date Telephone:
E-mail:
1 2 | Confid Request | Cover Letter(s) | 26.79 KiB |
Inkjet Consumer Solutions (ICS) Division 16399 West Bernardo Drive San Diego CA 92127-1899, USA Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality In reference to the application under FCC ID: B94SDGOB1291, and pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission's Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below:
The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 1/20/2013:
Schematics Block diagram BOM/Parts External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ___________________________________ Julio Correa Product Regulations Engineer 858-655-3017 (tel) 858-655-3961 (fax) julio.correa@hp.com 20 July, 2012 Date
1 2 | PCII Request | Cover Letter(s) | 25.56 KiB |
Inkjet Consumer Solutions (ICS) Division 16399 West Bernardo Drive San Diego CA 92127-1899, USA July 13, 2012 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Ref: FCC Class II Permissive change for FCC ID: B94SDGOB1291 Applicant: Hewlett Packard Company Dear Examiner, This is to request a Class II Permissive change for FCC ID: B94SDGOB1291 originally granted on 02/15/2012. The change under this application is to add the SDGOB-1292 model number to the original grant under the FCC ID: B94SDGOB1291 given that both radio modules (SDGOB-1291 and SDGOB-1292) are electrically identical and the only difference is the digital input interface to connect to the host device. I attest that the certified device will not be capable of ad-hoc mode operation outside of the grant conditions. Sincerely, _________________________ Julio Correa Product Regulations Engineer 858-655-3017 (tel) 858-655-3961 (fax) julio.correa@hp.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-07-20 | 2422 ~ 2452 | DTS - Digital Transmission System | Class II Permissive Change |
2 | 2012-02-15 | 2422 ~ 2452 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2012-07-20
|
||||
1 2 |
2012-02-15
|
|||||
1 2 | Applicant's complete, legal business name |
HP Inc.
|
||||
1 2 | FCC Registration Number (FRN) |
0025126541
|
||||
1 2 | Physical Address |
3390 East Harmony Road
|
||||
1 2 |
Fort Collins
|
|||||
1 2 |
Fort Collins, CO
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
B94
|
||||
1 2 | Equipment Product Code |
SDGOB1291
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
R****** P****** T******
|
||||
1 2 | Title |
US Canada Technical Regulations
|
||||
1 2 | Telephone Number |
970-8********
|
||||
1 2 | Fax Number |
000-0********
|
||||
1 2 |
r******@hp.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Marvell Semiconductor
|
||||
1 2 | Name |
R******** V******
|
||||
1 2 | Physical Address |
5488 Marvell Lane
|
||||
1 2 |
Santa Clara, California 95054
|
|||||
1 2 |
Santa Clara, 95054
|
|||||
1 2 |
United States
|
|||||
1 2 | Telephone Number |
408 2********
|
||||
1 2 |
r******@marvell.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/13/2013 | ||||
1 2 | 06/01/2012 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11b/g/n WLAN Module | ||||
1 2 | 802.11 b/g/n WLAN Module | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Single Modular Approval | ||||
1 2 | Does not apply | |||||
1 2 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Modular Approval. Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Micom Labs
|
||||
1 2 | Name |
G**** H******
|
||||
1 2 | Telephone Number |
925-4********
|
||||
1 2 | Fax Number |
925-4********
|
||||
1 2 |
g******@micomlabs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2 | 2412 | 2462 | 0.059 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2 | 2422 | 2452 | 0.017 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2 | 2412 | 2462 | 0.059 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | 2 | 2422 | 2452 | 0.017 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC