150wl+170wl-QIG-ed2.book Page -i Friday, March 26, 2004 12:04 PM 150wl+170wl-QIG-ed2.book Page 0 Friday, March 26, 2004 12:04 PM 150wl+170wl-QIG-ed2.book Page i Friday, March 26, 2004 12:04 PM HP ProCurve 802.11b and 802.11g AP Cards Quick Install Guide 150wl+170wl-QIG-ed2.book Page ii Friday, March 26, 2004 12:04 PM Disclaimer HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard. Warranty See the Customer Support/Warranty booklet included with the product. A copy of the specific warranty terms applicable to your Hewlett-Packard products and replacement parts can be obtained from your HP Sales and Service Office or authorized dealer. Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translation into another language without the prior written consent of Hewlett-Packard. Publication Number 5990-6054 Edition 2 March 2004 Applicable Products HP ProCurve 802.11b 150wl Card 11 Channel HP ProCurve 802.11b 150wl Card 13 Channel HP ProCurve 802.11b 150wl Card 14 Channel HP ProCurve 802.11g 170wl Card 13 Channel HP ProCurve 802.11g 170wl Card 14 Channel HP ProCurve 802.11g 170wl Card 11 Channel
(J8135A)
(J8136A)
(J8137A)
(J8430A)
(J8431A)
(J8432A) Trademark Credits Windows NT, Windows, and MS Windows are US registered trademarks of Microsoft Corporation. 150wl+170wl-QIG-ed2.book Page iii Friday, March 26, 2004 12:04 PM Contents Introducing the 802.11b and 11g AP Cards. 1 Network Options . 2 802.11b and 11g AP Cards Features . 3 802.11b and 11g AP Cards Features (continued). 4 Installing and Configuring the 802.11b and 11g AP Cards . 6 Installing an AP Card . 6 Radio Antenna Notes:. 6 Configuring the Basic Items. 7 Association Test . 8 Troubleshooting . 9 Common Situations. 9 LED Activity . 10 Clients Cannot Connect to the Access Point . 11 Configuration Mismatch. 11 Client PC Card Does Not Work . 11 Intermittent Loss of Connection . 11 Client Does Not Receive an IP Address -
Cannot Connect to Internet . 12 Other Problems . 13 Card Specifications . 14 Physical . 14 Networking . 14 Radio Characteristics . 15 iii 150wl+170wl-QIG-ed2.book Page iv Friday, March 26, 2004 12:04 PM Regulatory Information . 18 Notice for U.S.A. 18 Notice for Canada . 19 Notice for European Union . 19 Notice for Japan . 22 iv 150wl+170wl-QIG-ed2.book Page 1 Friday, March 26, 2004 12:04 PM Introducing the 802.11b and 11g AP Cards Kit Contents The 802.11b and 11g AP Card kit includes the items as pictured in Figure 1:
1. One AP Card, (one of the following):
802.11b AP Card 150wl 11 Channel (J8135A)with 11-channel support for use in North America only
802.11b AP Card 150wl 13 Channel (J8136A)with 13-channel support for use in Europe and Asia only (except Japan)
802.11b AP Card 150wl 14 Channel (J8137A)with 14-channel support for use in Japan only
802.11g AP Card 170wl 13 Channel (J8430A)with 13-channel support for use in Europe and Asia only (except Japan)
802.11g AP Card 170wl 14 Channel (J8431A)with 14-channel support for use in Japan only
802.11g AP Card 170wl 11 Channel (J8432A)with 11-channel support for use in North America only 2. A transparent protective casing for storing your 802.11b and 11g AP Card while not in use. 3. The HP ProCurve 802.11b and 802.11g AP Cards Quick Install Guide
(this document). Figure 1. Kit Contents 3 1 2 1 150wl+170wl-QIG-ed2.book Page 2 Friday, March 26, 2004 12:04 PM Network Options The 802.11b and 11g AP Cards enable you to provide 802.11b/g wireless communications from your HP ProCurve Wireless Access Point 520wl. Figure 2. Stand Alone Wireless LAN With the HP ProCurve Wireless Access Point 520wl you can connect to a corporate Local Area Network (LAN) infrastructure to have wireless access to all network facilities. LAN Infrastructures may either be:
Stand-alone wireless LANs as pictured in Figure 2. Wireless network infrastructures connected to an existing Ethernet network as pictured in Figure 3. Figure 3. LAN Infrastructure 2 150wl+170wl-QIG-ed2.book Page 3 Friday, March 26, 2004 12:04 PM 802.11b and 11g AP Cards Features Note:
This is a partial list of features, for a complete list see the specifications in Appendix A, of the HP ProCurve Wireless Access Point 520wl User Guide. The 802.11b/g AP cards are radio products. Refer to the Regulatory Infor-
mation section of this guide for information that may apply in your country. The 802.11b and 11g AP Cards are wireless network cards that fit into either radio slot on an HP ProCurve Wireless Access Point 520wl. These cards have two LED indicators and two integrated antennas. Optionally you can use these cards in combination with the external HP ProCurve Range Extender Antenna 100wl. Note:
See the HP ProCurve website for other available HP ProCurve antennas. www.hp.com/go/hpprocurve Figure 4. The 802.11b and 11g AP Card a. Integrated Antenna b. Radio LED Off - No wireless activity Blinking - Sensing/transmitting wireless data c. Power ON/OFF LED Solid Green - standard operational mode d. Connector for optional external HP ProCurve 100wl antenna. 3 150wl+170wl-QIG-ed2.book Page 4 Friday, March 26, 2004 12:04 PM 802.11b and 11g AP Cards Features (continued) The 150wl (802.11b AP card) supports the following wireless LAN features:
The 802.11b AP card is Wi-Fi (Wireless Fidelity) certified by the Wireless Ethernet Compatibility Alliance (WECA). This means that your 802.11b AP card will communicate with other vendors IEEE 802.11b compliant wireless LAN products. Fully compatible with any other wireless LAN system based on Direct Sequence Spread Spectrum (DSSS) radio technology that complies with the IEEE 802.11 standard on wireless LANs. Supports all 802.11b data rates in the transmit range of 11, 5.5, 2 and 1 Mbps. Supports Automatic Frequency Channel Selection (2.4 GHz) allowing roaming over multiple channels. 128-bit RC4 data encryption (also supports 64-bit RC4/Wired Equivalent Privacy - WEP). The 170wl (802.11g AP card) supports the following wireless LAN features:
Fully compatible with any other wireless LAN system based on Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM) radio technology that complies with the IEEE 802.11 standard on wireless LANs. Supports all 802.11g data rates in the transmit range of 54, 48, 36, 24, 18, 12, 9 and 6 Mbps. The 802.11g AP card also supports the 802.11b data rates. Supports Automatic Frequency Channel Selection (2.4 GHz) allowing roaming over multiple channels. 128-bit RC4 data encryption (also supports 64-bit RC4/Wired Equivalent Privacy - WEP). Closed system support. This feature prevents wireless client access without the configured wireless network name. VLAN 16 with multiple SSIDs, extends support for compatibility with VLAN enabled wired networks by providing the user with the capability to configure up to 16 Network Names or SSIDs, and 16 corresponding VLAN identifiers per AP card. Secure Socket Layer (SSL) Browser support is an enhancement to the already existing HTTP management interface of the AP. This functionality will allow secure communication between the AP and the HTTP client. 4 150wl+170wl-QIG-ed2.book Page 5 Friday, March 26, 2004 12:04 PM Rogue AP detection will provide the ability to detect unauthorized APs within a given coverage area. When enabled, the AP will scan the range of coverage and identify the active APs in the area. SNMPv3 support is for supporting the Simple Network Management Protocol version 3. The SNMPv3 feature is based on existing SNMP framework, but addresses security requirements for device and network management. Tx Power Control is an implementation of transmit power control by using standard 802.11d frames to control transmit power. The AP will allow four intervals of transmit power control: 100% (Regulatory Maximum), 50%, 25%, and 12.5%. Monitoring Station Statistics provides the capability to monitor a set of statistics for all active stations connected to an AP. A user can enable this feature and view statistics such as: IP address, MAC address, interface, station type, protocol, and so forth. HTTPS file transfer is an enhancement to the already existing HTTP management interface of APs. This functionality will allow transfer of configuration and kernel image files to and from the AP from any compliant HTTP/HTTPS browser. Auto configuration by DHCP server will allow for auto configuration of the AP devices in a given subnet to include an IP address and basic configuration. Multiple RADIUS authentication server support extends the existing authentication server configuration option available in APs. A user can configure separate primary and secondary servers for RADIUS and 802.1x servers that can be used for MAC based or 802.1x authentication, respectively. This also extends the server fallback capability to the new servers supported. 5 150wl+170wl-QIG-ed2.book Page 6 Friday, March 26, 2004 12:04 PM Installing and Configuring the 802.11b and 11g AP Cards The 802.11b and 11g AP Cards can be installed only in HP ProCurve Wireless Access Point 520wl. To setup your 520wl, please see the documentation that came with that product. Installing an AP Card 1. Slide the card into Slot A or B. 2. Connect the HP 520wl unit to a power source. (Cards can be installed when the 520wl is powered on.) 3. Wait for the power LED on the card to turn green before proceeding. Figure 5. Installing an AP Card 1 2 3 4. Complete the basic configuration of the card, as described under Configuring the Basic Items on the next page. Radio Antenna Notes:
The built-in radio and antennas of the 802.11b and 11g AP Cards perform best in an open environment with as few obstacles as possible. To achieve the maximum range for wireless communications, do not cover the card with objects such as books or thick stacks of paper. If you are using the card in a non-open location, you may consider the purchase and use of the optional HP ProCurve Range Extender Antenna 100wl, which can be connected to either card. See the HP ProCurve website for other available HP ProCurve antennas. www.hp.com/go/hpprocurve 6 150wl+170wl-QIG-ed2.book Page 7 Friday, March 26, 2004 12:04 PM Configuring the Basic Items The first time you connect to an APs HTTP interface, the Setup Wizard launches automatically. The Setup Wizard provides step-by-step instruc-
tions for how to configure the Access Points basic operating parameter, such as Network Name, IP parameters, system parameters, and manage-
ment passwords. The following is a brief summary of the procedure. For a complete descrip-
tion, see your 520wl User Guide, Chapter Two, Getting Started. 1. Open your web browser on the network computer 2. 3. Type in the IP Address of the HP 520wl. If you dont know the IP address, please see the HP 520wl Unit Installation foldout for information on how to determine the IP address. If necessary, disable the browsers internet proxy settings. 4. Enter the network password (default is public), leave the user name field empty, and click OK. The Setup Wizard will launch automatically. Figure 6. Network Password 7 150wl+170wl-QIG-ed2.book Page 8 Friday, March 26, 2004 12:04 PM Figure 7. AP Configuration using Setup Wizard 5. Click on the Setup Wizard button to begin and follow the instructions. If you want to configure the AP without using the Setup Wizard, click Exit and see your 520wl User Guide, Chapter Four, Advanced Configuration. Note:
For more detailed information on how to configure the AP, refer to the 520wl User Guide. Association Test 1. Install a separate 802.11b/g wireless PC Card (not the 150wl or the 170wl) in a laptop or other computer, including the drivers and the Client Manager application. 2. Configure that card to match the network name and encryption key of the 802.11b and 11g AP Card you just installed in the HP 520wl Access Point. 3. Verify the Client Manager application shows association with the HP 520wl Access Point. 8 150wl+170wl-QIG-ed2.book Page 9 Friday, March 26, 2004 12:04 PM Troubleshooting Common Situations If you encounter difficulty using and/or installing these cards in your Access Point, the error may be related to various causes:
The cards are not firmly inserted into the card slot. Client is out of range (too far away from the access point). This prevents the cards from establishing a wireless connection with the client. Configuration mismatch, which prevents clients from establishing a wireless connection with the access point. The configurations for the AP and the client may be different in some way, perhaps due to the wrong kind of radio or an improper setting in the configuration for one of the two devices. Most configuration problems can be fixed by changing the settings for the 520wl Access Point using the browser-based interface. Configuration prob-
lems may include:
SSID (Service Set Identification) misspelled IP Configuration (Static IP is incorrect). If you did not use auto configuration by DHCP server, then check configuration parameters to ensure they are correct. VLAN (May exclude your Access Point) Password Settings Management Services Settings (SNMP, Telnet, CLI, and HTTP) Intra-BSS Traffic Operation set to Block Security Settings (WEP Encryption Keys, 802.1x, MAC Access) 9 150wl+170wl-QIG-ed2.book Page 10 Friday, March 26, 2004 12:04 PM LED Activity The starting point to troubleshoot problems with the card inserted into your Access Point is looking at the LED activity of the card. The following table provides an overview of the various modes of operation and the associated LED activity. It also includes a number of trouble-
shooting hints, that may help solve the problem. Power LED Radio LED Continuous Green Blinking Off Off Off LED Activity Description/Action Standard operational mode. Card is powered on. Sensing/transmitting wireless data. Card is powered on. No wireless activity. No action is required. Card is not powered on, so it can not transmit/receive data. The cause may either be:
AP Card is not fully inserted into the slot
AP is not receiving power (LEDs on the AP are not lit) 10 150wl+170wl-QIG-ed2.book Page 11 Friday, March 26, 2004 12:04 PM Clients Cannot Connect to the Access Point Here are some possible causes if clients are not able to connect to the access point. Configuration Mismatch Frequent configuration mismatches involve the following items:
Network Name The 802.11b and 11g AP Cards Network Name is case-sensitive. Each wireless AP Card in the HP 520wl should have a unique Network Name. This Network Name must match the active Network Name on client machines. The client software allows you to store Network Names in configuration profiles, then you can select a profile to fit your location. Network Names should be allocated and maintained by the Network Administrator. Encryption Key If you have set a WEP encryption key in the 520wl configuration, the client wireless PC card must be configured to use the same key. Client PC Card Does Not Work 1. Ensure you are using the latest PC Card driver software. 2. Download and install the latest client software. 3. Refer to the documentation that came with your client cards for addi-
tional troubleshooting suggestions. Intermittent Loss of Connection 1. Ensure the client is within range of the HP 520wl. For more information regarding range see the Range/Transmit Rate chart on page 16. 2. The signal strength can be checked by using the signal strength gauge from the client software. 11 150wl+170wl-QIG-ed2.book Page 12 Friday, March 26, 2004 12:04 PM Client Does Not Receive an IP Address - Cannot Connect to Internet 1. If the HP 520wl is configured as a DHCP server, open the Web-browser Interface and select the Configure button, then the Network tab and then the DHCP Server tab to ensure the proper DHCP settings are being used. 2. If you are using the DHCP feature on the HP 520wl, then ensure your local DHCP server is operating on the same subnet mask as your HP 520wl. NOTE:
For more information regarding DHCP Server settings, see the HP 520wl Users Guide. 3. From the client computer, use the ping network command to test the connection with the HP 520wl. If the HP 520wl responds, but you still cannot connect to the Internet, there may be a physical network config-
uration problem. 12 150wl+170wl-QIG-ed2.book Page 13 Friday, March 26, 2004 12:04 PM Other Problems If you are unable to fix problems with the 802.11b and 11g AP Card using the suggestions in this chapter, you may want to try resetting the AP to factory default settings. On the 520wl Access Point hold the RESET button down for 5 seconds. Turn the power off and back on again to reboot the Access Point. In some cases you may need to reboot your computer or clients as well. Check the documentation that came with the client wireless cards for other troubleshooting procedures for those cards. If you are still having problems with the 802.11b and 11g AP Card and you have not been able to fix them with the Troubleshooting suggestions from this booklet, please refer to the more detailed instructions in the Trouble-
shooting chapter of the HP 520wl User Guide. 13 150wl+170wl-QIG-ed2.book Page 14 Friday, March 26, 2004 12:04 PM Card Specifications Physical Dimensions Weight
(LxWxH) 45 grams 117.8 x 53.95 x 8.7 mm Temperature & Humidity (non condensing) Operation Storage 0 to 40 C
(32 to 104 F)
-10 to 50 C
(14 to 122 F) Maximum humidity 95%
Maximum humidity 95%
Networking Media Access Protocol CSMA/CA (Collision Avoidance) with Acknowledgment (ACK)
.11b Card
.11g Card
IEEE 802.11 Standard for Wireless LANS (DSSS)
Wi-Fi certified IEEE 802.11 Standard for Wireless LANS (DSSS and OFDM)
11 Mbps
5.5 Mbps
2 Mbps
1 Mbps
54 Mbps
48 Mbps
36 Mbps
24 Mbps
18 Mbps
12 Mbps
9 Mbps
6 Mbps The .11g card also supports the .11b data rates. Both cards use an automatic Transmit Rate Select mechanism. Compatibility Data Rates 14 150wl+170wl-QIG-ed2.book Page 15 Friday, March 26, 2004 12:04 PM Radio Characteristics RF Frequency Band 2.4 GHz (2400-2500 MHz)
(Center Frequencies) Supported sub-
channels 1 2 3 4 5 6 7 8 9 10 11 12 13 14 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 (default)a 2462a 2467a 2472a 2484b Modulation Technique Direct Sequence Spread Spectrum Spreading Bit Error Rate (BER) Nominal Output Power Encryption CCK 11 & 5.5 Mbps, DQPSK for 2 Mbps, and DBPSK for 1 Mbps 11-chip Barker Sequence Better than 10-5 15 dBm 128-bit (RC4), also supports 64-bit RC4/WEP
(Wired Equivalent Privacy) a. France is restricted to these channels. b. Channel 14 is only available when using the .11b only mode. 15 150wl+170wl-QIG-ed2.book Page 16 Friday, March 26, 2004 12:04 PM 11b Card Range/
Transmit Rate Open Office Semi-Open Office Closed Office Receiver Sensitivity Tx Power (dBm) Antenna Gain 11 Mbps 5.5 Mbps 2 Mbps 1 Mbps 142 m
(466 ft.) 98 m
(322 ft.) 67 m
(220 ft.)
-82 dBm 15 177 m
(581 ft.) 122 m
(400 ft.) 84 m
(276 ft.)
-85 dBm 15 219 m
(718 ft.) 151 m
(495 ft.) 104 m
(341 ft.)
-88 dBm 15 272 m (892 ft.) 187 m
(614 ft.) 129 m
(423 ft.)
-91 dBm 15 0 dBi (integrated diversity antenna module; 2.4-2.5 GHz) 11g Card Range/
Transmit Rate Open Office Semi-
Open Office Closed Office Receiver Sensitivity
(dBm) Tx Power
(dBm) Antenna Gain 54 Mbps 48 Mbps 36 Mbps 24 Mbps 18 Mbps 12 Mbps 9 Mbps 6 Mbps 56 m
(184 ft.) 38 m
(125 ft.) 69 m
(226 ft.) 48 m
(157 ft.) 107 m
(351 ft.) 73 m
(239 ft.) 26 m
(85 ft.)
-68 33 m
(108 ft.)
-70 51 m
(167 ft.)
-75 164 m
(538 ft.) 113 m
(371 ft.) 78 m
(256 ft.)
-80 219 m
(718 ft.) 151 m
(495 ft.) 272 m
(892 ft.) 187 m
(614 ft.) 292 m
(958 ft.) 201 m
(659 ft.) 314 m
(1030 ft.) 216 m
(709 ft.) 104 m
(341 ft.)
-84 129 m
(423 ft.)
-87 139 m
(453 ft.)
-88 149 m
(489 ft.)
-89 12 13 14 15 15 15 15 15 0 dBi (integrated diversity antenna module; 2.4-2.5 GHz) The 11g card also supports the range and transmit rates of the 11b card. 11g Card Range/
Transmit Rate Open Office Semi-
Open Office 16 11 Mbps 5.5 Mbps 2 Mbps 1 Mbps 204 m
(669 ft.) 140 m
(459 ft.) 236 m
(774 ft.) 162 m
(531 ft.) 253 m
(830 ft.) 174 m
(571 ft.) 338 m
(1109 ft.) 232 m
(761 ft.) 150wl+170wl-QIG-ed2.book Page 17 Friday, March 26, 2004 12:04 PM Closed Office Receiver Sensitivity
(dBm) Tx Power
(dBm) Antenna Gain 97 m
(318 ft.)
-83 111 m
(364 ft.)
-85 120 m
(394 ft.)
-86 160 m
(525 ft.)
-90 15 15 15 15 3 dBi (integrated diversity antenna module; 2.4-2.5 GHz) The range of the wireless signal is related to the Transmit Rate of the wireless communication. Communications at lower Transmit range will travel larger distances. The range values listed above are typical distances as measured under controlled conditions. These values may vary according to the actual radio conditions at the location where the 802.11b and 11g AP Cards will be installed. The range of your wireless devices can be affected when the antennas are placed near metal surfaces and solid high-density materials. Range is also impacted due to obstacles in the signal path of the radio that may either absorb or reflect the radio signal. The listed ranges are typical values when used indoors in office environ-
ments that can be described as follows:
In Open Office environments, antennas can see each other, that is, there are no physical obstructions between them. In Semi-open Office environments, work space is divided by shoulder-height, hollow wall elements; antennas are at desktop level. In Closed Office environments, work space is separated by floor-to-
ceiling brick walls. Auto Channel Selection. When inserted into the HP ProCurve Wireless Access Point 520wl, the 802.11b and 11g AP Card will use the factory-set default channel (channel 10, printed in bold), unless the LAN Administrator selected a different channel when configuring the access point device. 17 150wl+170wl-QIG-ed2.book Page 18 Friday, March 26, 2004 12:04 PM Regulatory Information Wireless communication is often subject to local radio regulations. Although wire-
less networking products have been designed for operation in the license-free 2.4 GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment. Notice for U.S.A. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Connect the device into an outlet on a circuit different from that to Increase the separation between the device and the receiver. which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help. The FCC requires the user to be notified that any changes or modifications made to the device that are not expressly approved by the Hewlett-Packard Company may void the users authority to operate the device. Warning: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio exposure limits. Nevertheless, you should use the device such that human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should not be less than 20 cm (8 inches) during normal operation. Warning: Radio Antenna Co-location If your AP 520wl has two AP cards installed, a minimum separation of 20 cm must be maintained between the antennas of the two cards. This may require the use of an approved external antenna with any 11b or 11g card. 18 150wl+170wl-QIG-ed2.book Page 19 Friday, March 26, 2004 12:04 PM Notice for Canada Operation of this device is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Notice for European Union 0336 !
This device complies with the essential requirements of the R&TTE Direc-
tive 1999/5/EC. Compliance with this directive implies conformity to the following European Norms:
EN 60950 Product Safety
EN 300 328-1 / EN 300 328-2 Technical requirements for 2.4 GHz radio equipment
EN 301 489-1 / EN 301 489-17 General EMC requirements for radio equipment EU & EFTA country restriction notices This device may be used in the following EU and EFTA countries:
Austria Belgium Denmark Finland France1 Germany
Greece Iceland Ireland Italy Liechtenstein Luxembourg
Netherlands
Norway
Portugal Sweden
Switzerland
United Kingdom Notes:
1. For normal wireless LAN operation of this product, only a limited band is available for operation in France (Channels 10, 11, 12, and 13). LAutorit de rgulation des telecommunications (ART) has special regulations for hotspots allowing other channels, too. Please check with ART (http://www.art-telecom.fr) for local rulings and authorization. 2. For up-to-date information on worldwide country authorizations, power levels and usage restrictions, please visit http://www.hp.com/go/hpprocurve. Click on technical support, then manuals. Select your wireless product and open the document Wireless Radio Country Approvals Matrix. 19 150wl+170wl-QIG-ed2.book Page 20 Friday, March 26, 2004 12:04 PM EU Declaration of Conformity (11b AP Card) DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer's Name:
Hewlett-Packard Company Manufacturers Address:
declares that the product 8000 Foothills Blvd. Roseville, CA 95747-5502 U.S.A. Product Name:
HP ProCurve Wireless 802.11b AP Card 150wl Product Number(s):
Regulatory Model:
J8136A NC5041 conforms to the following Product Specifications:
Safety:
Health:
EMC:
Radio:
EN 60950:2000 / IEC 60950:1999 EU 1999/519/EC EN 301 489-1 V1.2.1 (2000-08) EN 301 489-17 V1.1.1 (2000-09) EN 300 328-1 V1.2.2 (2000-07) EN 300 328-2 V1.1.1 (2000-07) Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and the R&TTE Directive 1999/5/EC and carries the CE marking accordingly. The Product was tested in a typical configuration with an HP ProCurve Wireless Access Point 520wl. Roseville, July 11, 2003 European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE, Herrenberger Strae 140, D-71034 Bblingen (FAX: + 49-7031-14-3143) Regulatory Model Identification Number For regulatory identification purposes, this product has been assigned a Regulatory Model Number (RMN). The RMN for your product is NC5040, NC5041 or NC5042 or RVLC-
0402 depending on the card type and number of supported channels. The RMN should not be confused with the marketing name or the Product Number. 20 150wl+170wl-QIG-ed2.book Page 21 Friday, March 26, 2004 12:04 PM EU Declaration of Conformity (11g AP Card) DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Safety: EN 60950:2000 / IEC 60950:1999 HP Procurve Wireless 802.11g AP Card 170wl Roseville, CA 95747-5502 U.S.A. Product Name:
Product Number(s): J8430A Manufacturer's Name: Hewlett-Packard Company Manufacturer's Address: 8000 Foothills Blvd. declares, that the product Regulatory Model: RSVLC-0402 conforms to the following Product Specifications:
Health: EU 1999/519/EC Radio:
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and the R&TTE Directive 1999/5/EC and carries the CE marking accordingly. EN 301 489-1 V1.1.1 (2000-07) EN 301 489-1 V1.2.1 (2001-08) EN 301 489-17 V1.1.1 (2000-09) EN 300 328-1 V1.2.2 (2002-07) EN 300 328-2 V1.1.1 (2000-07) EMC:
Roseville, January 30, 2004 European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE, Herrenberger Strae 140, D-71034 Bblingen (FAX: + 49-7031-14-3143) 21 150wl+170wl-QIG-ed2.book Page 22 Friday, March 26, 2004 12:04 PM Notice for Japan 22 150wl+170wl-QIG-ed2.book Page 23 Friday, March 26, 2004 12:04 PM This page is intentionally unused. 150wl+170wl-QIG-ed2.book Page 24 Friday, March 26, 2004 12:04 PM Technical information in this document is subject to change without notice. Copyright 2004, Hewlett-Packard Development Company, L.P. All rights reserved. Reproduction, adaptation, or translation without prior written permission is prohibited except as allowed under the copyright laws. Edition 2 March 2004 Manual Part Number 5990-6054
*5990-6054*