HP ScanJet Wireless Adapter 100
*L2761-90001*
*L2761-90001*
ES Lea esto primero www.hp.com/support/sjadapter100 EN ..1FR..8ZHTW..36RU..64IT..15KO..43AR..71DE..22ZHCN..50TR..78ES..29PT..57ID..85TH..92 1 Make sure that the power is off. 2 Locate the adapter in the wireless port. 3 4 Insert the accessory into the USB port as shown above. 5 Make sure that the accessory is fully seated in the port. 6 Turn the power on. NOTE: Make sure that the product is connected to a computer using a USB cable. 7 If the HP software is not installed, install it now. TIP: Follow the instructions on the computer display. If the HP software is already installed, skip this step. 8 At the computer, do the following:
a) If you are on a Win OS, b) Click Start, and then click HP. c) Click HP ScanJet #####, and then click Device Setup & Software. d) Follow the instructions to setup the WiFi function. Or a) If you are on a Mac OS, b) Launch HP Easy Start to go to Connect. d) Follow the instructions to setup the WiFi function. 9 From a mobile device go to www.hp.com/support, and then download the HP JetAdvantage Capture application (app). 10 Open the app on the mobile device to wirelessly scan from your product. 11 If the wireless adapter needs to be removed, use the tool that came in the box to remove it. HP limited warranty statement HP ScanJet Wireless Adapter 100 Regulatory Model Identification Number For regulatory identification purposes, this product has been assigned a Regulatory Model Number (RMN). The RMN for your product is SHNGD-1605. The RMN should not be confused with the marketing name (HP ScanJet Wireless Adapter 100) or the HP Product Number (L2761A). Notice for the U.S.A. This device complies with Part 15 of the Federal Communication Commission rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Increase the separation between the equipment and the receiver. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at this own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
Consult the dealer or an experienced radio/TV technician for help. FCC Caution: The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP Inc. may void the users authority to operate the equipment. nected. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. Warning Exposure to Radio Frequency Radiation Although the radiated output power of this device isbelow the FCC radio exposure limits, the device should be used in such a manner that the potential for humancontact with the antennas during normal operation is minimized. To avoid the possibility of exceed-
ing theFCC radio frequency exposure limits, human proximity to the antenna should not be less than 20 cm(8 inches) during normal operation. Notice for Canada This device complies with the limits for a Class B digital device and conforms to Industry Canada standard ICES-003. Products that contain a radio transmitter comply with Industry Canada standard RSS210 and are labeled with an IC ID. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and personnel. Note pour le Canada Cet appareil numrique de la classeBest conforme la norme ICES-003 dIndustry Canada. La radio sans fil de ce dispositif est conforme la certification RSS 210 dIndustry Canada et est tiquete avec un numro dapprobation IC. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer dinterfrences et (2) doit accepter toute rception dinterfrence, y compris les interfrences susceptibles de gnrer un fonctionnement indsirable de lappareil. Cet quipement respecte les limites dexposition aux radiofrquences canadiennes applicables dans un environnement non contrl. Cet quipement doit tre install et fonctionner une distance minimale de 20 cm entre le radiateur et votre corps. Copyright 2015 HP Development Company, L.P. Reproduction, adaptation or translation without prior written permis sion is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the ex press warranty statements ac-
companying such products and services. Nothing herein should be construed as constituting an additional war ranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Reproduction, adaptation or translation without prior written permis sion is prohibited, except as allowed under the copyright laws. La reproduction, ladaptation ou la traduction de ce document sans lautorisation crite pralable de HP est interdite, sauf dans des conditions conformes aux lois relatives au copyright. Les informations contenues dans ce document peuvent tre modifies sans pravis. Les seules garanties pour les produits et servicesHP sont dcrites dans les dclarations de garantie expresse qui accompagnent ces produits et services. Les informations contenues dans ce document ne constituent en aucun cas une garantie supplmentaire. HPnest pas responsable des erreurs dordre technique ou ditorial ou des omissions contenues dans ce document.
Declaration of Conformity Declaration of Conformity according to ISO/IEC 17050-1 and EN 17050-
Suppliers Name:
HP Inc. DoC#: SHNGD-1605-R1 Suppliers Address:
Building 6, No. 690 BiBo Road, ZhangJiang, Shanghai, China declares, that the product Product Name and Model:
ScanJet Wireless Adapter 100 Regulatory Model Number:1) SHNGD-1605 Product Options:
conforms to the following Product Specifications:
SAFETY:
EMC:
Radio:
IEC 60950-1:2005 +A1:2009 EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 EN 62479:2010 FCC CFR 47 Part 15 Class B ICES-003:2012 Issue 5 Class B EN 301 489-1 V1.9.2 / EN 301 489-17:V2.2.1 EN 300 328: V1.9.2 FCC Title 47 CFR, Part 15 Subpart C (Section 15.247) / IC: RSS-210 IEC 62311:2007 / EN62311:2008 RoHS:
EN 50581:2012 Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC, the Ecodesign Directive 2009/125/EC, the RoHs Directive 2011/65/EU and carries the accordingly. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 Conditions: (1) this device may not cause harmful interference, and 92) this device must accept any interference received, including interference that may cause undesired operation. Additional Information:
1) This product is assigned a Regulatory Model Number which stays with the regulatory asspects of the design. The Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be confused with the marketing name or the product numbers. Shanghai, China 04 15 May 2015 Local contact for regulatory topics only:
European Contact:
HP GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany USA Contact:
HP Inc., 1501 Page Mill Road, Palo Alto 94304, U.S.A. 650-857-1501