FCC ID: B94HNI46CPA HSN-I46C

Regulatory, Safety, and Environmental Notices User Guide SUMMARY This guide provides regulatory, safety, and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, tablets, desktops, thin clients, personal workstations, all-in-ones, and point-of-sale terminals. Legal information Copyright 2022 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Java is a registered trademark of Oracle and/or its affiliates. WiGig is a registered trademark of Wi-Fi Alliance. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: July 2022 Document Part Number: N25728-001 About this guide This guide provides regulatory, safety, and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, tablets, desktops, thin clients, personal workstations, all-in-ones, and point-of-sale terminals. To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. WARNING!

Indicates a hazardous situation that, if not avoided, could result in serious injury or death. CAUTION:

Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. Indicates information considered important but not hazard-related (for example, messages IMPORTANT:

related to property damage). Warns the user that failure to follow a procedure exactly as described could result in loss of data or in damage to hardware or software. Also contains essential information to explain a concept or to complete a task. NOTE: Contains additional information to emphasize or supplement important points of the main text. TIP: Provides helpful hints for completing a task. iii Table of contents 1Regulatory notices .................................................................................................................................................................1 Accessing regulatory labels...............................................................................................................................................1 Federal Communications Commission notice ...................................................................................................................1 Modifications .............................................................................................................................................................2 Cables.........................................................................................................................................................................2 Products with wireless LAN devices or HP Mobile Broadband Modules ...................................................................2 Wireless devices with 5.925 GHz7.125 GHz............................................................................................................3 Belarus regulatory notice ..................................................................................................................................................3 Brazil notice .......................................................................................................................................................................3 Canada notices...................................................................................................................................................................3 European Union and UK regulatory notices ......................................................................................................................4 Declaration of Conformity .........................................................................................................................................4 Products with radio functionality (EMF) ...........................................................................................................4 Restrictions for products with radio functionality (select products only) .......................................................4 Radio frequency bands and maximum power levels (select products and countries only).............................5 Ergonomics notice .............................................................................................................................................5 European telephone network declaration (Modem/Fax)..................................................................................5 Australia and New Zealand notice .....................................................................................................................................6 China WWAN notice............................................................................................................................................................6 China radio equipment notice............................................................................................................................................6 Japan notice .......................................................................................................................................................................6 Wireless LAN, Wireless WAN, and Bluetooth certification markings ......................................................................6 Mexico notice .....................................................................................................................................................................7 Eurasian Union regulatory notices ....................................................................................................................................7

....................................................................................................................7

........................................................................................................................7

: ................................................................................................................................8

:.....................................................................................................................................8 Singapore wireless notice..................................................................................................................................................8 South Korea notices...........................................................................................................................................................9 Regulatory submission document ............................................................................................................................9 Thailand wireless notice ....................................................................................................................................................9 Taiwan NCC notices ............................................................................................................................................................9 LAN 802.11 //:...............................................................................................9 Airline travel notice..........................................................................................................................................................10 User-replaceable battery notices....................................................................................................................................10 Factory-sealed battery notices .......................................................................................................................................10 iv Laser compliance.............................................................................................................................................................10 Telecommunications device approvals ...........................................................................................................................11 Modem notices.................................................................................................................................................................11 U.S. modem statements..........................................................................................................................................11 Canada modem statements ....................................................................................................................................12 Japan modem statements.......................................................................................................................................12 New Zealand modem statements ...........................................................................................................................13 Voice support...................................................................................................................................................13 Macrovision Corporation notice.......................................................................................................................................13 2Safety notices ......................................................................................................................................................................14 Important safety information .........................................................................................................................................14 Heat-related safety warning notice ................................................................................................................................15 Potential safety conditions notice ..................................................................................................................................15 Installation conditions.....................................................................................................................................................15 Acoustics notice ...............................................................................................................................................................15 Battery notices.................................................................................................................................................................16 Fan notices .......................................................................................................................................................................16 Headset and earphone volume level notice....................................................................................................................17 Laser safety .....................................................................................................................................................................17 Power supply and power cord set requirements ............................................................................................................17 Power supply class I grounding requirements........................................................................................................17 Brazil notice .....................................................................................................................................................18 Denmark ..........................................................................................................................................................18 Finland .............................................................................................................................................................18 Norway.............................................................................................................................................................18 Sweden ............................................................................................................................................................18 Power supply requirements ....................................................................................................................................18 China ................................................................................................................................................................18 For use in Norway ............................................................................................................................................18 Power cord set requirements ..................................................................................................................................18 Power cord notice ....................................................................................................................................................19 DC plug of external HP power supply..............................................................................................................19 Japan power cord notice..........................................................................................................................................19 Japan power cord requirements..............................................................................................................................19 Pinch hazard ....................................................................................................................................................................20 TV antenna connectors protection..................................................................................................................................20 External television antenna grounding...................................................................................................................20 Lightning protection ................................................................................................................................................20 Note to CATV system installer .................................................................................................................................21 Travel notice ....................................................................................................................................................................21 China safety notices.........................................................................................................................................................22 China altitude notice................................................................................................................................................22 China tropical warning notice..................................................................................................................................22 v Norway and Sweden cable grounding notice for products with a TV tuner ...................................................................23 Taiwan eyesight notice ....................................................................................................................................................23

.............................................................................................................................................23 3Environmental notices.........................................................................................................................................................24 Electronic hardware, packaging and battery recycling...................................................................................................24 Disposal of waste equipment by users ...........................................................................................................................24 Brazil alkaline battery disposal.......................................................................................................................................24 Brazil hardware recycling information............................................................................................................................24 France Triman WEEE and recycling label ........................................................................................................................25 Taiwan battery recycling information .............................................................................................................................25 Turkey WEEE regulation ..................................................................................................................................................25 ENERGY STAR Certification (select products only) ........................................................................................................25 Chemical substances .......................................................................................................................................................27 Perchlorate materialspecial handling may apply .........................................................................................................27 China environmental notices...........................................................................................................................................27 China PC energy label ......................................................................................................................................................27 China RoHS.......................................................................................................................................................................31

.........................................................................31

.....................32

(RoHS) .................................................................34

.............................................................................................................................34

(RoHS) .....................................................................................................................................................................35

.............................................................................................................................35 India restriction of hazardous substances (RoHS) ..........................................................................................................36 Information for European Union Commission Regulation 1275/2008 ..........................................................................36 IT ECO declarations ..........................................................................................................................................................37 Japan restriction of hazardous substances (RoHS) ........................................................................................................37 Ley para el Aprovechamiento Sustentable de la Energa de Mxico .............................................................................37 TCO Certified ....................................................................................................................................................................37 TCO Certified Edge............................................................................................................................................................38 Index ........................................................................................................................................................................................40 vi 1 Regulatory notices This chapter provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Accessing regulatory labels Some products may also provide electronic regulatory labels (e-labels) that can be accessed through the system BIOS. Regulatory labels, which provide country or regional regulatory information (for example, FCC ID), may be physically located on the bottom of the computer, inside the battery bay (select products only), under the removable service door (select products only), on the back of the display, or on the wireless or modem module. NOTE: Electronic labels are not available on all products. NOTE: Devices not for sale or use in the United States may not contain a FCC ID. To view electronic regulatory labels:

1. 2. 3. 4. Turn on or restart the computer. Press esc or f10 to enter Computer Setup. Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press enter. To view an electronic label, use a pointing device or the arrow keys to select one of the listed items, and then press OK. NOTE: The list of available electronic label items varies depending on the computer model and installed devices. 5. To exit Computer Setup menus without making any changes:

Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select Main, select Ignore Changes and Exit, and then press enter. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Regulatory notices 1 These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product:

Write to:

HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 Call HP at 650-857-1501 or Email techregshelp@hp.com To identify this product, refer to the part, series, or model number found on the product. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in a manner that is in conformance with the expected typical usage. 2 Chapter 1Regulatory notices Wireless devices with 5.925 GHz7.125 GHz FCC regulations restrict the operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in aircraft while flying above 10,000 feet. The operation of this device is also prohibited for control of or communications with unmanned aircraft systems. Belarus regulatory notice The product complies with the Belarus National Radio/Telecom Technical Regulation TR 2018/024/BY. Brazil notice Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. IMPORTANT: A alimentao de energia predefinida para 220/230V. Se voc possuir tomada eltrica de 110/115V, por favor, altere a chave na parte traseira do seu computador para a tenso correta. Para maiores informaes, consulte o site da ANATEL www.anatel.gov.br. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING! Exposure to Radio Frequency Radiation: The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in a manner that is in conformance with the expected typical usage. IMPORTANT: When using IEEE 802.11a, n, or ac wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15 GHz to 5.25 GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. Wireless devices with 5.925 GHz7.125 GHz 3 European Union and UK regulatory notices The European Union and UK have their own set of regulatory notices. Declaration of Conformity Products bearing the CE marking and UK marking have been constructed so that they can operate in at least one EU Member State and UK and comply with one or more of the following EU Directives and the equivalent UK Statutory Instruments as may be applicable:

RED 2014/53/EU; Low Voltage Directive 2014/35/EU; EMC Directive 2014/30/EU; Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonised Standards. The full EU and UK Declaration of Conformity can be found at the following website:

http://www.hp.eu/certificates (Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters: Email techregshelp@hp.com. Products with radio functionality (EMF) Use this notice when you need to provide EMF data for radio operation. This product incorporates a radio transmitting and receiving device. For notebook computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product. Restrictions for products with radio functionality (select products only) Some products in some countries have restrictions on radio function. IEEE 802.11x wireless LAN with 5.15 GHz5.35 GHz and/or Wi-Fi 6E Low Power Indoor 5.945 IMPORTANT:

GHz6.425 GHz (or 5.925 GHz6.425 GHz in UK) frequency bands are restricted for indoor use only in all countries reflected in the matrix. Using this WLAN application outdoors might lead to interference issues with existing radio services. 4 Chapter 1Regulatory notices Radio frequency bands and maximum power levels (select products and countries only) The table shows radio frequency bands and maximum power levels for some products and some countries. Table 1-1 Radio frequency bands and maximum power levels (select products and countries only) Radio Technology Bluetooth; 2.4 GHz NFC; 13.56 MHz RFID; 865868 MHz/915921 MHz WLAN Wi-Fi 802.11x; 2.4 GHz WLAN Wi-Fi 802.11x; 5 GHz WLAN Wi-Fi 802.11ax; 6 GHz WWAN 5G NR (450 MHz7125 MHz) WWAN 4G LTE; 700/800/900/1800/2100/2300/2600/3500 MHz WWAN 3G UTMS; 900/2100 MHz WWAN 2G GSM GPRS EDGE; 900 MHz WWAN 2G GSM GPRS EDGE; 1800 MHz WiGig 802.11ad; 60 GHz Maximum Transmit Power EIRP (mW) 100 10 2000/4000 100 200 EU: 200/25 (LPI/VLP) UK: 250/25 (LPI/VLP) 400 200 250 2000 1000 316 NOTE: Use only HP-supported software drivers and correct country settings to ensure compliance. Ergonomics notice When a mobile computer is used at the office workstation for display work tasks where the Visual Display Unit (VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000 (voluntary GS certification) Mobile computers bearing the "GS" approval mark meet the applicable ergonomic requirements. Without external keyboards, they are suitable only for short-time use for VDU tasks. During mobile use with disadvantageous illumination conditions (e.g. direct sunlight) reflections may occur, which result in reduced readability. A computer system comprising HP brand products meets the applicable ergonomic requirements if all affected constituent products bear the "GS" approval mark, for example Business Desktop PC, keyboard, PC-mouse and monitor. Please pay attention when installing a dedicated Tower, Micro Tower Business Desktop PC or Workstation that is not intended to be installed/used in the direct field of view at visual display workplaces. To avoid annoying reflections at visual display workplaces, this device must not be placed in the direct field of view. European telephone network declaration (Modem/Fax) The product herewith complies with the requirements of the applicable Directive and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/

Radio frequency bands and maximum power levels (select products and countries only) 5 regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. Australia and New Zealand notice This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. The computer must be connected to the Telecommunication Network through a line cord that meets the requirements of AS/CA S008. WARNING! Modems without integral RJ11 connector that are shipped with this computer should not be installed in any other device. China WWAN notice China radio equipment notice Japan notice V-2 B VCCI-B VCCI32-1 B VCCI-B 5GHz Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. 6 Chapter 1Regulatory notices Some products may use electronic regulatory labels (e-labels). To view the certification mark and numbers on an e-label, please refer to the previous Accessing regulatory labels section. e e Mexico notice Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Aviso sobre conexiones inalmbricas para Mxico:

En el caso de PC de escritorio, equipos All-in-One, terminales de punto de venta, thin clients y workstations en uso normal e instalados con un dispositivo de transmisin y recepcin de radio, una distancia de separacin de 20 cm garantiza que los niveles de exposicin a radiofrecuencia cumplan con los requisitos de Mxico. Eurasian Union regulatory notices The following notices might apply to products sold in the Eurasian Union. HP Inc.

: 1501 Page Mill Road, Palo Alto, California 94304, U.S. 10- ,

. 4-, 5- 6- . 4- , , 3

, 2013 . 5- 6- , , 12 12-

. HP Inc.

: 1501 Page Mill Road, Palo Alto, California 94304, U.S. 10

. Mexico notice 7 4-, 5- 6- . 4-

, 3 2013 . 5- 6- , , 12 12- .

, 125171, . , , 16, .3,

/: +7 495 797 35 00 / +7 499 92132 50

: " ..", , 050040, .

, , -, 77/7,

/: +7 727 355 35 52

, 125171, , , 16A 3,

/: +7 495 797 35 00 / +7 499 92132 50

, 050040, ., , -

., 77/7,

/: +7 727 355 35 52 Singapore wireless notice Turn off any WWAN devices while you are aboard aircraft. The use of these devices aboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. 8 Chapter 1Regulatory notices South Korea notices Regulatory submission document Thailand wireless notice

(This telecommunication equipment conforms to the requirements of NBTC.) This radio communication equipment has the electromagnetic field strength in compliance with the Safety Standard for the Use of Radio communication Equipment on Human Health announced by the National Telecommunications Commission. Taiwan NCC notices The following notices apply to Taiwan. LAN 802.11 //:

South Korea notices 9 Airline travel notice Use of electronic equipment aboard commercial aircraft is at the discretion of the airline. User-replaceable battery notices When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP website at http://www.hp.com/recycle. For information about removing a user-replaceable battery, refer to the user guide included with the product. Factory-sealed battery notices The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Laser compliance Use this notice to warn of possible radiation exposure from incorrect laser usage. WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in accordance with IEC/EN 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007 or Laser Notice No. 56, dated May 8, 2019. 10 Chapter 1Regulatory notices Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. Modem notices Canada, Japan, New Zealand, and the U.S. have their own sets of modem notices. U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. Telecommunications device approvals 11 If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japan modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the LSI Corporation PCI-SV92EX Soft modem is below:

12 Chapter 1Regulatory notices New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all ofTelecom's network services. This equipment is not capable, under all operating conditions, ofcorrect operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is noguarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noiseand may also cause a false answer condition. Should suchproblems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be setto operate within the following limits for compliance with Telecom's Specifications:

There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing(So set between 2and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it isbeing recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with inrespect to the nature of the personal information collected, the purpose for its collection, howit is to be used, and what is disclosed to any otherparty. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. New Zealand modem statements 13 2 Safety notices Your product documentation might require one or more of these safety notices. Important safety information These notices could apply to many products. WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the web at http://www.hp.com/ergo and on the Documentation CD that is included with the product. The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving it. Install the computer near an AC outlet. The AC power cord is your computers main AC disconnecting device and must be easily accessible at all times. If the power cord provided with your computer has a grounded plug, always use the power cord with a properly grounded AC outlet to avoid the risk of electric shock. To reduce the possibility of an electric shock from the telephone network, plug your computer into the AC outlet before connecting it to the telephone line. Also, disconnect the telephone line before unplugging your computer from the AC power outlet. Always disconnect the modem cord from the telephone system before installing or removing your computer cover. Do not operate the computer with the cover removed. For your safety, always unplug the computer from its power source and from any telecommunications systems (such as telephone lines), networks, or modems before performing any service procedures. Failure to do so may result in personal injury or equipment damage. Hazardous voltage levels are inside the power supply and modem of this product. As a safety precaution, if the system power load exceeds the specific configurations capacities, the system may temporarily disable some USB ports. WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. 14 Chapter 2Safety notices Do not plug a modem or telephone cable into the RJ-45 (network) jack. If your computer is provided with a voltage select switch for use in a 115 or 230 V power SAVE THESE INSTRUCTIONS. IMPORTANT:

system, the voltage select switch has been pre-set to the correct voltage setting for use in the particular country/region where it was initially sold. Changing the voltage select switch to the incorrect position can damage your computer and void any implied warranty. This product has not been evaluated for connection to an IT power system (an AC distribution system with no direct connection to earth, according to applicable safety standards). Heat-related safety warning notice Use this notice if injury from excessive heat is a possibility. WARNING! To reduce the possibility of heat-related injuries or of overheating the mobile computer, do not place the mobile computer directly on your lap or obstruct the computer air vents. Use the mobile computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The mobile computer and the AC adapter comply with the user-accessible surface temperature limits defined by applicable safety standards. CAUTION: To reduce the risk of heat-related injuries, do not touch internal hot surfaces until internal surfaces have cooled down to room temperature. Potential safety conditions notice Use this notice to warn users about the possibility that a failure was not safe and controlled. If you notice any of the following conditions (or if you have other safety concerns), do not use the computer:

crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer. It is normal for these conditions to appear when an internal electronic component fails in a safe and controlled manner. However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact technical support for assistance. Installation conditions See installation instructions before connecting this equipment to the input supply. WARNING! Energized and moving parts may be inside the computer. Disconnect power to the equipment before removing the enclosure. Replace and secure the enclosure before re-energizing the equipment. Acoustics notice Use this notice when the sound pressure level might be lower than recommended or expected. Sound pressure level (LpA) is far below 70dB(A) (operator position, normal operation, according to ISO 7779). To display product noise emission data, go to IT ECO Declarations at http://www.hp.com/go/ted, and then select a product category from the drop-down menu. Heat-related safety warning notice 15 Battery notices One or more of these safety notices might apply to your product's battery. WARNING! The product may contain an internal lithium manganese dioxide, vanadium pentoxide, or alkaline battery or battery pack. There is risk of fire and burns if the battery pack is not handled properly. WARNING! Do not attempt to recharge the battery. WARNING! Do not expose to temperatures higher than 60 C (140 F). WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Fast charging may not be available for non-compatible or non-HP batteries. WARNING! To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING! Replace only with the HP spare designated for this product. WARNING! Do not ingest battery, a Chemical Burn Hazard. WARNING! This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. WARNING! Keep new and used batteries away from children. WARNING!

from children. If the battery compartment does not close securely, stop using the product and keep it away WARNING!

immediate medical attention. If you think batteries might have been swallowed or placed inside any part of the body, seek WARNING!

explosion or the leakage of flammable liquid or gas. Leaving a battery in an extremely high temperature surrounding environment can result in an WARNING! A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Table 2-1 Battery disposal icon and description Icon Description Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. In order to forward them to recycling or proper disposal, please use the public collection system or return them to HP, an authorized HP partner, or their agents. Fan notices Use one or more of these notices to warn users about the dangers of injuries from spinning fan blades. WARNING!

Keep body parts away from moving parts. 16 Chapter 2Safety notices WARNING! Keep body parts away from fan blades. WARNING! Keep body parts out of the motion path. Headset and earphone volume level notice This notice warns about the danger of high volume settings for headsets and earphones. WARNING!

To prevent possible hearing damage, do not listen at high volume levels for long periods. Adjustment of the volume control as well as the equalizer to other settings than the center position may increase the ear-/headphones output voltage and therefore the sound pressure level. The use of factors influencing the ear-/headphones output other than those specified by the manufacturer (e.g. operating system, equalizer software, firmware, driver) may increase the ear-/headphones output voltage and therefore the sound pressure level. Laser safety For products equipped with optical drives or fiber optic transceivers. This product may be provided with an optical storage device (i.e., CD or DVD drive) and/or fiber optic transceiver. These contain lasers and are classified as Class 1 Laser Products in accordance with the standard IEC/EN 60825-1 and comply with its requirements. Each laser product complies with US FDA Regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 or Laser Notice No. 56, dated May 8, 2019. WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the laser products installation guide may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein. Allow only HP Authorized Service technicians to repair the unit. Power supply and power cord set requirements Different countries have different requirements for power supplies and power cords. Power supply class I grounding requirements For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the system power cord into an AC outlet that provides a ground connection. Substitute cords may not provide adequate fault protection. Only use the power cord supplied with this product or an HP Inc. authorized replacement. Headset and earphone volume level notice 17 Brazil notice Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia eltrica que possua aterramento (trs pinos), conforme a norma nbr abnt 5410,visando a segurana dos usurios contra choques eltricos. Denmark Finland Norway Sweden Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. Laite on liitettv suojakoskettimilla varustettuun pistorasiaan. Apparatet m tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Power supply requirements The power supplies on some products have external power switches. The voltage select switch feature on the product permits it to operate from any line voltage between 100-127 or 200-240 volts AC. Power supplies on those products that do not have external power switches are equipped with internal circuits that sense the incoming voltage and automatically switch to the proper voltage. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. China CCC For use in Norway Some products are designed for an IT power system with phase-to-phase voltage 230 V. Power cord set requirements One or more of these notices might apply to your product's power cord. WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet. If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. The power cord set received with the product meets the requirements for use in the country where the equipment was originally purchased. Use only the power cord provided with the unit or an authorized 18 Chapter 2Safety notices replacement power cord from HP Inc. or an approved HP Inc. source. Replacement part numbers may be found at http://www.hp.com/support. Power cord sets for use in other countries must meet the requirements of the country where you use the product. For more information on power cord set requirements, contact your authorized HP dealer, reseller, or service provider. WARNING! Do not use power cords from other products. Mismatched power cords may result in a shock and fire hazard. The requirement listed below is applicable to all countries:

The power cord must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be installed. The power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. WARNING! Do not operate this product with a damaged power cord set. If the power cord set is damaged in any manner, replace it immediately. Damaged cords may result in user exposure to hazards. Power cord notice If you were not provided with a power cord for the computer orfor an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/18AWG, and the length of the cord must be between 1.0 m (3.2 ft) and 2 m (6.56 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. DC plug of external HP power supply The diagram illustrates the DC plug of external HP power supply. Japan power cord notice Japan power cord requirements For use in Japan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. Power cord notice 19 Pinch hazard Use this notice to warn about the possibility of pinching injuries. WARNING! Observe pinch hazard areas. Keep fingers away from closing parts. TV antenna connectors protection Several safety notices might apply to TV antenna connectors. External television antenna grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is electrically grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper electrical grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-

discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Lightning protection For added protection of any product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug the product from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product from lightning and power line surges. Table 2-2 Antenna Grounding Reference Grounding Component 1 2 3 4 5 Electric Service Equipment Power Service Grounding Electrode System (NEC Art 250, Part III) Ground Clamps Grounding Conductors (NEC Section 810.21) Antenna Discharge Unit (NEC Section 810.20) 20 Chapter 2Safety notices Table 2-2 Antenna Grounding (continued) Reference Grounding Component 6 7 Ground Clamp Antenna Lead-in Wire Note to CATV system installer This reminder is provided to call the CATV systems installers attention to section 820.93 of the National Electric Code, which provides guidelines for proper grounding and in particular, specify that the Coaxial cable shield shall be connected to grounding system of the building, as close to the point of cable entry as practical. Travel notice Use this notice to warn about the possibility of serious injury from voltage converter kits. WARNING! To reduce the risk of electric shock, fire, or damage to theequipment, do not attempt to power the computer with a voltage converter kit sold for appliances. Note to CATV system installer 21 China safety notices China altitude notice 2000m 2000m China tropical warning notice 22 Chapter 2Safety notices Norway and Sweden cable grounding notice for products with a TV tuner Norway and Sweden require a galvanic isolator for grounding. CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system. Taiwan eyesight notice This eyesight notice applies to products in Taiwan.

(1) 30 10

(2) 2 2 1 Norway and Sweden cable grounding notice for products with a TV tuner 23 3 Environmental notices This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware, packaging and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle. For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/. Disposal of waste equipment by users Use this notice to explain the icon associated with waste disposal. Table 3-1 Disposal of waste equipment icon and its description Icon Description This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/recycle. Brazil alkaline battery disposal No descarte o produto eletrnico em lixo comum Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar Brazil hardware recycling information No descarte o produto eletrnico em lixo comum 24 Chapter 3Environmental notices Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar France Triman WEEE and recycling label Use this notice to explain the icon associated with recycling. Taiwan battery recycling information This notice provides the regulations for battery manufacture and recycling in Taiwan. Table 3-2 Taiwan battery recycling icon and its description Icon Description The Taiwan EPA requires dry battery manufacturing or importing firms, in accordance with Article 15 of the Waste Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or promotions. Contact a qualified Taiwanese recycler for proper battery disposal. Turkey WEEE regulation Trkiye Cumhuriyeti: AEEE Ynetmeliine Uygundur ENERGY STAR Certification (select products only) ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency criteria or requirements set by the U.S. Environmental Protection Agency.As an ENERGY STAR Partner, HP Inc. has followed the U.S. EPAs enhanced product certification process to ensure that products marked with the ENERGY STAR logo are ENERGY STAR certified per the applicable ENERGY STAR guidelines. The following logo appears on all ENERGY STAR-certified computers:

France Triman WEEE and recycling label 25 A key ENERGY STAR requirement for computer products is power management features that significantly reduce energy consumption when the product is not in use.Power management allows a computer to automatically enter a low power sleep mode, or other low power mode, after a defined period of inactivity.The power management features have been preset as follows when the computer is operating on AC power:

Table 3-3 Preset power management features when the computer is operating on AC power Computer type Time to activate display sleep mode Time to activate computer sleep mode (minutes) Resuming from sleep mode Notebooks, Mobile Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Product will exit sleep mode when the power/sleep button is pressed. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. Tablets/Slates Less than or equal to 1 minute Not applicable Not applicable Desktops, Integrated Desktops, Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Thin clients Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes when sleep mode is supported by the operating system (varies by model) Product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. When sleep mode is supported by operating system product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. For computers that support an always-on, always-connected use profile where internet access is available

(such as tablets and slates), alternative low power modes - such as Short or Long Idle modes (as defined in the ENERGY STAR Computer Program Requirements) are provided that consume very little power (</= 10 Watts) and when applicable, maximize product battery life. These alternative low power modes are dynamic, with the display sleep mode activated within 1 minute of user inactivity. The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management website at http://www.energystar.gov/powermanagement. 26 Chapter 3Environmental notices Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR website at http://www.energystar.gov. ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No. 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. Perchlorate materialspecial handling may apply The computers real-time clock battery may contain perchlorate and may require special handling when recycled or disposed of in California. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/. China environmental notices China PC energy label China requires this notice of energy efficiency. Chemical substances 27 In accordance with The Regulation of the Implementation on China Energy Label for Microcomputers, this microcomputer has an Energy Efficiency Label. The energy efficiency grade, TEC (Typical Energy Consumption), and product category presented on the label are determined and calculated according to the standard GB28380-2012. 1. Energy Efficiency Grades The grade is determined by the standard with the calculation of base consumption level with the sum of all the allowances for additional components such as main memory and graphics card. For products of any grade, the TEC should not exceed the value specified in the following table:

Table 3-4 Typical Energy Consumption (TEC) values Product Type TEC (kilowatt hour) Desktop microcomputer, AIO Category A 98.0+Efa 148.0+Efa 198.0+Efa Grade 1 Grade 2 Grade 3 Portable Computer Category B 125.0+Efa 175.0+Efa 225.0+Efa Category C 159.0+Efa 209.0+Efa 259.0+Efa Category D 184.0+Efa 234.0+Efa 284.0+Efa Category A Category B Category C 20.0+Efa 26.0+Efa 54.5+Efa 35.0+Efa 45.0+Efa 75.0+Efa 45.0+Efa 65.0+Efa 123.5+Efa NOTE: Efa is the sum of power factor of product additional functions. 2. Typical Energy Consumption The energy consumption figure presented on the label is the data measured with the representative configuration that covers all the configurations in the registration unit which is selected according to The Regulation of the Implementation on China Energy Label for Microcomputers". Thus, actual energy consumption of this specific microcomputer may not be the same as the TEC data presented in the label. 3. Product Category The product category is determined by the standard according to the microcomputers configuration. The categorization of products complies with the regulations in the following table:

Table 3-5 Product category and configuration description Product Type Configuration Description Category A Category B Category C Desktop microcomputer, AIO Portable Computer The desktop microcomputer and AIO whose configuration is out of the scope of Category B, C, and D The portable computer whose configuration is out of the scope of Category B and C CPU physical core number of 2, and system memory of not less than 2 GB A Discrete GPU CPU physical core number of over 2, with at least one of the following features:

1. 2. System memory of not less than 2 GB A Discrete GPU The product that has a CPU physical core number of not less than 2, system memory of not less than 2GB, A Discrete GPU with Frame Buffer Width not less than 128-bit. 28 Chapter 3Environmental notices Table 3-5 Product category and configuration description (continued) Product Type Category D Configuration Description CPU physical core number of not less than 4, with at least one of the following features:

1. 2. System memory of not less than 4 GB A Discrete GPU with Frame Buffer Width not less than 128-bit For more details on the specification, please refer to the standard GB28380-2012. GB28380-2012 China PC energy label 29 30 Chapter 3Environmental notices China RoHS China uses the following notices for RoHS. Table 3-6

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

I/O PCA

(LCD) CD/DVD/

X X X X X X X X X X X O X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O China RoHS 31 Table 3-6 (continued)

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

/Java USB USB X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572

"X" RoHS

"X" RoHS O O O O O O O O Table 3-7

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 32 Chapter 3Environmental notices Table 3-7 (continued) I/O PCA

(LCD) CD/DVD/

/Java USB USB 3D /

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) X X X X X X X O X X X X X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 33 Table 3-7 (continued)

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE) SJ/T 11364 O GB/T 26572 X GB/T 26572

"X" RoHS

"X" RoHS

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Table 3-8 Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Unit Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent chromium (Cr+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Cables

Chassis/Other

I/O PCAs

(LCD) Liquid crystal display (LCD) panel Memory Motherboard, processor, heat sinks Power pack Power supply 34 Chapter 3Environmental notices Table 3-8 Declaration of the Presence Condition of the Restricted Substances Marking (continued) Storage Devices Wireless Devices Restricted substances and its chemical symbols 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption. http://www.hp.com/support To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select Manuals.

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Table 3-9 Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Unit Cables

/ Chassis/Other

I/O PCAs

(LCD) Liquid crystal display (LCD) panel (for AIO only) Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent chromium

(Cr+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE)

(RoHS) 35 Table 3-9 Declaration of the Presence Condition of the Restricted Substances Marking (continued) Restricted substances and its chemical symbols Unit Memory Motherboard, processor, heat sinks Power supply Storage Devices Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent chromium

(Cr+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption. http://www.hp.com/support To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select Manuals. India restriction of hazardous substances (RoHS) This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the "India E-waste Rule 2016."

It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except where allowed pursuant to the exemptions set in Schedule 2 of the Rule. Information for European Union Commission Regulation 1275/2008 The European Union requires this notice about power consumption. To locate product power consumption data, including when the product is in networked standby with all wired network ports connected and wireless devices connected, 36 Chapter 3Environmental notices refer to section P14 Additional information of the product IT ECO Declaration at http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html. Where applicable, activate and deactivate a wireless network using the instructions included in the product user guide or the operating system. Information is also available at http://www.hp.com/support. IT ECO declarations Use these links to provide locations for IT ECO declarations. Notebook or tablet PCs http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/iteconotebook-o.html Desktop PCs and Thin Clients http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?jumpid=reg_R1002_USEN Workstations http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html Japan restriction of hazardous substances (RoHS) 2008 JISC0950 2006 7 1 http://www.hp.com/go/jisc0950/

A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. Ley para el Aprovechamiento Sustentable de la Energa de Mxico Ley para el Aprovechamiento Sustentable de la Energa de Mxico Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energa de Mxico, que requiere la divulgacin del consumo de energa del modo de uso normal (modo inactivo) y del modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energa del modo inactivo de su configuracin especfica puede diferir de la informacin de la etiqueta. El consumo real de energa de su producto puede ser mayor o menor que el valor informado en la etiqueta de energa de producto para Mxico a causa de factores como la configuracin (componentes y mdulos seleccionados) y el uso (tareas que se estn efectuando, software instalado y en ejecucin, etc.). NOTE: Esta ley no es aplicable a las estaciones de trabajo. TCO Certified This section applies only to products bearing the TCO Certified logo. See https://tcocertified.com/product-finder/ to see a list of TCO Certified products. IT ECO declarations 37 TCO Certified Edge This section applies only to products bearing the TCO Certified Edge logo. 38 Chapter 3Environmental notices See https://tcocertified.com/product-finder/ to see a list of TCO Certified Edge products. TCO Certified Edge 39 Index A airline travel notice 10 altitude notice 22 Aviso para o Brasil 3 avisos Brasil 3 B battery 16 battery notice 10, 24 battery recycling 24 Belarus regulatory notice 3 Brazil notice 3, 18 C cable grounding notice 23 Canada modem statement 12 Canada notices 3 China environmental notices 27 China PC energy label 27 D disposal notices battery 24 battery, user replacement 10 equipment 24 factory sealed battery 10 E electronic hardware and battery recycling 24 ENERGY STAR certification 25 environmental notices 24 equipment disposal notice 24 ergonomics notice 5 European Union Commission Regulation 1275/2008 36 F fan notice 16 Federal Communications Commission notebook computers cables 2 notebook computers modifications 2 notebook computers notice 1 40 Index G GS Notice 5 H equipment disposal 24 ergonomics 5 fan 16 headset and earphone volume level 17 headset and earphone volume level India restriction of hazardous notice 17 I India restriction of hazardous substances notice 36 J Japan modem statement 12 Japan notice 6 Japan power cord notice 19 Japan restriction of hazardous substances notice 37 L labels, regulatory 1 laser safety notice 10, 17 M Macrovision Corporation notice 13 maximum power levels 5 Mexico wireless notice 7 modem notices 11 modem statements Canada 12 Japan 12 New Zealand 13 U.S. 11 modifications, notebook computers Federal Communications Commission 2 N New Zealand modem statement 13 notices airline travel 10 battery 10, 16, 24 Belarus regulatory 3 Brazil 3, 18 Canada 3 environmental 24 substances 36 Japan 6 Japan power cord 19 Japan restriction of hazardous substances 37 laser safety 10, 17 Macrovision Corporation 13 Mexico 7 modem 11 perchlorate material 27 power cords 19 Singapore 8 South Korea 9 Taiwan 9 Thailand wireless notice 9 travel 21 notices, notebook computers Federal Communications Commission 1 P power cord notice 19 R radio frequency bands 5 recycling, electronic hardware and battery 24 regulatory submission document, South Korea 9 S Singapore wireless notice 8 South Korea notice 9 South Korea regulatory submission document 9 T Taiwan notice 9 TCO Certified Certification 37 TCO Certified Edge Certification 38 Thailand wireless notice 9 travel notice 21 tropical warning notice 22 TV tuner, cable grounding notice 23 U U.S. modem statement 11 V voice support 13 volume level notice, headset and earphone 17 W wireless devices 3 wireless LAN devices 2 Symbols/Numerics 34, 35 34, 35 Index 41

User Guide SUMMARY This guide provides information about components, network connection, power management, security, backing up, and more. Software terms By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund subject to the refund policy of your seller. For any further information or to request a full refund of the price of the computer, please contact your seller. Legal information Copyright 2022 HP Development Company, L.P. Product notice This user guide describes features that are common to most models. Some features might not be available on your computer. Not all features are available in all editions or versions of Windows. Systems may require upgraded and/or separately purchased hardware, drivers, software or BIOS update to take full advantage of Windows functionality. Windows is automatically updated, which is always enabled. High-speed internet and Microsoft account required. ISP fees may apply and additional requirements may apply over time for updates. See http://www.windows.com. If your product ships with Windows in S Mode: Windows in S Mode works exclusively with apps from the Microsoft Store within Windows. Certain default settings, features, and apps cannot be changed. Some accessories and apps that are compatible with Windows may not work (including some antivirus, PDF writers, driver utilities, and accessibility apps), and performance may vary, even if you switch out of S Mode. If you switch to Windows, you cannot switch back to S Mode. Learn more at Windows.com/SmodeFAQ. To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select Manuals. AMD is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Intel, Celeron, Pentium, and Thunderbolt are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. NVIDIA and the NVIDIA logo are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and other countries. The microSD logo and microSD are trademarks of SD-3C LLC. USB Type-C and USB-C are registered trademarks of USB Implementers Forum. DisplayPort and the DisplayPort logo are trademarks owned by the Video Electronics Standards Association (VESA) in the United States and other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Sound is a trademark of DTS, Inc. DTS, Inc. All Rights Reserved

. Second Edition: May 2022 First Edition: January 2022 Document Part Number: N05887-002 Safety warning notice Reduce the possibility of heat-related injuries or of overheating the computer by following the practices described. WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by applicable safety standards. iii Processor configuration setting (select products only) Important information about processor configurations. IMPORTANT: Select computer products are configured with an Intel Pentium N35xx/N37xx series or a Celeron N28xx/N29xx/N30xx/N31xx series processor and a Windows operating system. If your computer is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings. iv Processor configuration setting (select products only) Table of contents 1Getting started.......................................................................................................................................................................1 Finding information ...........................................................................................................................................................1 2Components ...........................................................................................................................................................................3 Locating hardware .............................................................................................................................................................3 Locating software..............................................................................................................................................................3 Right...................................................................................................................................................................................3 Left.....................................................................................................................................................................................4 Display ...............................................................................................................................................................................5 Low blue light mode (select products only) ..............................................................................................................6 Keyboard area....................................................................................................................................................................8 Touchpad ...................................................................................................................................................................8 Touchpad settings .............................................................................................................................................8 Adjusting touchpad settings .....................................................................................................................8 Turning on the touchpad ...........................................................................................................................8 Touchpad components ......................................................................................................................................9 Lights .........................................................................................................................................................................9 Power key, speakers, and fingerprint reader ..........................................................................................................11 Special keys .............................................................................................................................................................12 Action keys...............................................................................................................................................................13 Hot keys (select products only) ...............................................................................................................................15 Bottom .............................................................................................................................................................................15 Labels...............................................................................................................................................................................16 3Network connections ...........................................................................................................................................................19 Connecting to a wireless network ...................................................................................................................................19 Using the wireless controls .....................................................................................................................................19 Wireless button ...............................................................................................................................................19 Operating system controls..............................................................................................................................19 Connecting to a WLAN .............................................................................................................................................20 Using HP Mobile Broadband (select products only) ................................................................................................20 Using Bluetooth wireless devices (select products only)........................................................................................21 Connecting Bluetooth devices.........................................................................................................................21 Connecting to a wired network........................................................................................................................................21 Connecting to a local area network (LAN) (select products only)...........................................................................22 Using HP LAN-Wireless Protection (select products only) ......................................................................................22 Using HP MAC Address Pass Through (select products only) .........................................................................................23 4Navigating the screen ..........................................................................................................................................................24 Using touchpad and touch screen gestures ....................................................................................................................24 Tap ...........................................................................................................................................................................24 v Two-finger pinch zoom............................................................................................................................................24 Two-finger slide (touchpad and precision touchpad) .............................................................................................25 Two-finger tap (touchpad and precision touchpad) ...............................................................................................25 Three-finger tap (touchpad and precision touchpad).............................................................................................25 Four-finger tap (touchpad and precision touchpad) ...............................................................................................26 Three-finger swipe (touchpad and precision touchpad).........................................................................................26 Four-finger swipe (precision touchpad) ..................................................................................................................26 One-finger slide (touch screen)...............................................................................................................................27 Using an optional keyboard or mouse.............................................................................................................................27 Using an on-screen keyboard (select products only)......................................................................................................27 5Entertainment features .......................................................................................................................................................28 Using a camera (select products only) ............................................................................................................................28 Using audio ......................................................................................................................................................................28 Connecting speakers ...............................................................................................................................................28 Connecting headphones ..........................................................................................................................................28 Connecting headsets ..............................................................................................................................................29 Using sound settings ...............................................................................................................................................29 Viewing or changing sound settings ...............................................................................................................29 Using the control panel to view and control audio settings ...........................................................................29 Using video ......................................................................................................................................................................29 Connecting a DisplayPort device using a USB Type-C cable (select products only)...............................................30 Discovering and connecting wired displays using MultiStream Transport.............................................................31 Connecting displays to computers with AMD or NVIDIA graphics (with an optional hub)..............................31 Connecting displays to computers with Intel graphics (with an optional hub) ..............................................31 Connecting displays to computers with Intel graphics (with a built-in hub) ..................................................31 Using data transfer ..........................................................................................................................................................32 Connecting devices to a USB Type-C port (select products only) ...........................................................................32 6Managing power...................................................................................................................................................................34 Using Sleep and Hibernation ..........................................................................................................................................34 Initiating and exiting Sleep......................................................................................................................................34 Initiating and exiting Hibernation (select products only) .......................................................................................35 Shutting down (turning off) the computer......................................................................................................................35 Using the Power icon ......................................................................................................................................................36 Running on battery power...............................................................................................................................................36 Using HP Fast Charge (select products only)...........................................................................................................36 Displaying battery charge .......................................................................................................................................36 Finding battery information in HP Support Assistant (select products only) ........................................................37 Conserving battery power .......................................................................................................................................37 Identifying low battery levels..................................................................................................................................37 Resolving a low battery level ..................................................................................................................................37 Resolving a low battery level when external power is available....................................................................38 Resolving a low battery level when no power source is available..................................................................38 Resolving a low battery level when the computer cannot exit Hibernation ..................................................38 Factory-sealed battery............................................................................................................................................38 vi Running on external power .............................................................................................................................................38 7Security ................................................................................................................................................................................40 Protecting the computer .................................................................................................................................................40 Using passwords..............................................................................................................................................................41 Setting passwords in Windows ...............................................................................................................................41 Setting passwords in Computer Setup....................................................................................................................41 Managing a BIOS administrator password ..............................................................................................................42 Setting a new BIOS administrator password ..................................................................................................42 Changing a BIOS administrator password.......................................................................................................43 Deleting a BIOS administrator password ........................................................................................................43 Entering a BIOS administrator password ........................................................................................................44 Using DriveLock Security Options ...........................................................................................................................44 Selecting Automatic DriveLock (select products only) ...................................................................................44 Enabling Automatic DriveLock ................................................................................................................44 Disabling Automatic DriveLock ...............................................................................................................45 Entering an Automatic DriveLock password ...........................................................................................45 Selecting manual DriveLock ............................................................................................................................45 Setting a DriveLock master password ....................................................................................................46 Enabling DriveLock and setting a DriveLock user password ..........................................................................46 Disabling DriveLock .........................................................................................................................................47 Entering a DriveLock password.......................................................................................................................48 Changing a DriveLock password .....................................................................................................................48 Windows Hello (select products only) .............................................................................................................................48 Using antivirus software .................................................................................................................................................49 Using firewall software....................................................................................................................................................49 Installing software updates ............................................................................................................................................49 Using HP Client Security (select products only) ..............................................................................................................50 Using HP TechPulse (select products only) .....................................................................................................................50 Using an optional security cable (select products only) .................................................................................................50 Using a fingerprint reader (select products only) ...........................................................................................................50 8Maintenance.........................................................................................................................................................................51 Improving performance...................................................................................................................................................51 Using Disk Defragmenter ........................................................................................................................................51 Using Disk Cleanup ..................................................................................................................................................51 Using HP 3D DriveGuard (select products only) ......................................................................................................51 Identifying HP 3D DriveGuard status ..............................................................................................................52 Updating programs and drivers ......................................................................................................................................52 Cleaning your computer ..................................................................................................................................................52 Enabling HP Easy Clean (select products only) .......................................................................................................52 Removing dirt and debris from your computer.......................................................................................................53 Cleaning your computer with a disinfectant ...........................................................................................................53 Caring for wood veneer (select products only) .......................................................................................................54 Traveling with or shipping your computer ......................................................................................................................54 vii 9Backing up, restoring, and recovering .................................................................................................................................56 Backing up information and creating recovery media ....................................................................................................56 Using Windows tools for backing up .......................................................................................................................56 Using the HP Cloud Recovery Download Tool to create recovery media (select products only)............................56 Restoring and recovering your system ...........................................................................................................................56 Creating a system restore .......................................................................................................................................57 Restoring and recovery methods ............................................................................................................................57 Recovering using HP Recovery media .....................................................................................................................57 Changing the computer boot order .........................................................................................................................58 Using HP Sure Recover (select products only) ........................................................................................................58 10Computer Setup (BIOS), TPM, and HP Sure Start ..............................................................................................................59 Using Computer Setup.....................................................................................................................................................59 Navigating and selecting in Computer Setup .........................................................................................................59 Restoring factory settings in Computer Setup .......................................................................................................59 Updating the BIOS....................................................................................................................................................60 Determining the BIOS version .........................................................................................................................60 Preparing for a BIOS update ............................................................................................................................60 Downloading a BIOS update ....................................................................................................................61 Installing a BIOS update ..........................................................................................................................61 Changing the boot order using the f9 prompt .......................................................................................................61 TPM BIOS settings (select products only) .......................................................................................................................62 Using HP Sure Start (select products only) .....................................................................................................................62 11Using HP PC Hardware Diagnostics ...................................................................................................................................63 Using HP PC Hardware Diagnostics Windows (select products only) .............................................................................63 Using an HP PC Hardware Diagnostics Windows hardware failure ID code............................................................63 Accessing HP PC Hardware Diagnostics Windows...................................................................................................63 Accessing HP PC Hardware Diagnostics Windows from HP Help and Support (select products only)...........63 Accessing HP PC Hardware Diagnostics Windows from HP Support Assistant ..............................................64 Accessing HP PC Hardware Diagnostics Windows from the Start menu (select products only) ....................64 Downloading HP PC Hardware Diagnostics Windows .............................................................................................64 Downloading the latest HP PC Hardware Diagnostics Windows version from HP .........................................64 Downloading HP Hardware Diagnostics Windows by product name or number (select products only) .......64 Downloading the HP PC Hardware Diagnostics Windows from the Microsoft Store..............................................65 Installing HP PC Hardware Diagnostics Windows ...................................................................................................65 Using HP PC Hardware Diagnostics UEFI .........................................................................................................................65 Using an HP PC Hardware Diagnostics UEFI hardware failure ID code ...................................................................65 Starting HP PC Hardware Diagnostics UEFI.............................................................................................................66 Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive ....................................................................66 Downloading the latest HP PC Hardware Diagnostics UEFI version ...............................................................66 Downloading HP PC Hardware Diagnostics UEFI by product name or number (select products only)..........66 Using Remote HP PC Hardware Diagnostics UEFI settings (select products only) .........................................................67 Downloading Remote HP PC Hardware Diagnostics UEFI .......................................................................................67 Downloading the latest Remote HP PC Hardware Diagnostics UEFI version .................................................67 Downloading Remote HP PC Hardware Diagnostics UEFI by product name or number ................................67 Customizing Remote HP PC Hardware Diagnostics UEFI settings ..........................................................................67 viii 12Specifications.....................................................................................................................................................................69 Input power......................................................................................................................................................................69 Operating environment ...................................................................................................................................................70 13Electrostatic discharge ......................................................................................................................................................72 14Accessibility .......................................................................................................................................................................73 HP and accessibility .........................................................................................................................................................73 Finding the technology tools you need...................................................................................................................73 The HP commitment................................................................................................................................................73 International Association of Accessibility Professionals (IAAP) .............................................................................74 Finding the best assistive technology.....................................................................................................................74 Assessing your needs ......................................................................................................................................74 Accessibility for HP products...........................................................................................................................74 Standards and legislation................................................................................................................................................75 Standards.................................................................................................................................................................75 Mandate 376 EN 301 549 .............................................................................................................................75 Web Content Accessibility Guidelines (WCAG).................................................................................................75 Legislation and regulations.....................................................................................................................................75 Useful accessibility resources and links..........................................................................................................................76 Organizations ..........................................................................................................................................................76 Educational institutions ..........................................................................................................................................76 Other disability resources .......................................................................................................................................76 HP links ....................................................................................................................................................................77 Contacting support ..........................................................................................................................................................77 Index ........................................................................................................................................................................................78 ix 1 Getting started This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer and where to find additional HP resources. After you set up and register the computer, HP recommends the following steps to get the most out of your smart investment:

TIP: To quickly return to the computer Start screen from an open app or the Windows desktop, press the Windows key on your keyboard. Pressing the Windows key again returns you to the previous screen. Connect to the internetSet up your wired or wireless network so that you can connect to the internet. For more information, see Network connections on page 19. Update your antivirus softwareProtect your computer from damage caused by viruses. The software is preinstalled on the computer. For more information, see Using antivirus software on page 49. Get to know your computerLearn about your computer features. See Components on page 3 and Navigating the screen on page 24 for additional information. Find installed softwareAccess a list of the software preinstalled on the computer:

Select the Start button, and then select All apps. or Right-click the Start button, and then select Apps and Features. Back up your hard driveCreate recovery discs or a recovery USB flash drive to back up your hard drive. See Backing up, restoring, and recovering on page 56. Access HP Support Assistant appFor quick online support, open the HP Support Assistant app (select products only). HP Support Assistant optimizes computer performance and resolves problems using the latest software updates, diagnostic tools, and guided assistance. Select the Search icon in the taskbar, type support in the search box, and then select HP Support Assistant. Finding information To locate resources that provide product details, how-to information, and more, use this table. Table 1-1 Additional information Resource Setup Instructions Contents Overview of computer setup and features Getting started 1 Contents Online chat with an HP technician Support telephone numbers Replacement parts videos (select products only) Maintenance and service guides HP service center locations Proper workstation setup Guidelines for posture and work habits that increase your comfort and decrease your risk of injury Electrical and mechanical safety information Important regulatory notices, including information about Restrictions of Hazardous Substances (RoHS) and proper battery disposal, if needed. Specific warranty information about this computer Table 1-1 Additional information (continued) Resource HP support For HP support, go to https://www.hp.com/support, and follow the instructions to find your product. or Select the Search icon in the taskbar, type support in the search box, and then select HP Support Assistant. or Select the question mark icon (select products only) in the taskbar. Safety & Comfort Guide To access this guide:

Select the Search icon in the taskbar, type HP Documentation in the search box, and then select HP Documentation. or Go to http://www.hp.com/ergo. IMPORTANT: You must be connected to the internet to access the latest version of the user guide. Regulatory, Safety, and Environmental Notices To access this document:

Select the Search icon in the taskbar, type HP Documentation in the search box, and then select HP Documentation. Limited Warranty*

To access this document:

Select the Search icon in the taskbar, type HP Documentation in the search box, and then select HP Documentation. or Go to http://www.hp.com/go/orderdocuments. IMPORTANT: You must be connected to the internet to access the latest version of the user guide.

*You can find your HP Limited Warranty located with the user guides on your product and/or on the CD or DVD provided in the box. In some countries or regions, HP might provide a printed warranty in the box. For countries or regions where the warranty is not provided in printed format, you can request a copy from http://www.hp.com/go/orderdocuments. For products purchased in Asia Pacific, you can write to HP at POD, PO Box 161, Kitchener Road Post Office, Singapore 912006. Include your product name, and your name, phone number, and postal address. 2 Chapter 1Getting started 2 Components Your computer features top-rated components. This chapter provides details about your components, where they are located, and how they work. Locating hardware Use these instructions to find out what hardware is installed on your computer. Select the Search icon in the taskbar, type device manager in the search box, and then select the Device Manager app. A list displays all the devices installed on your computer. For information about system hardware components and the system BIOS version number, press fn+esc

(select products only). Locating software Use these instructions to find out what software is installed on your computer:

Right-click the Start button, and then select Apps and Features. Right Use the illustration and table to identify the components on the right side of the computer. Components 3 Table 2-1 Right-side components and their descriptions Component Description

(1) microSD card reader Reads optional memory cards that store, manage, share, or access information. To insert a card:

1. 2. Hold the card label-side up, with the connectors facing the computer. Insert the card into the memory card reader, and then press in on the card until it is firmly seated. To remove a card:

Press in on the card, and then remove it from the memory card reader.

(2)

(3) USB Type-C power connector port, SuperSpeed 20 Gbps port, and DisplayPort output Connects a USB device, provides high-speed data transfer, and (for select products) charges small devices (such as a smartphone) when the computer is on or in Sleep mode. NOTE: Use a standard USB Type-C charging cable or cable adapter (purchased separately) when charging a small external device. and Connects a display device that has a USB Type-C connector, providing DisplayPort output. USB SuperSpeed 20 Gbps port with HP Sleep and Charge Connects a USB device, provides high-speed data transfer, and charges small devices (such as a smartphone), even when the computer is off. NOTE: Use a standard USB Type-A charging cable or cable adapter (purchased separately) when charging a small external device.

(4) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it might not prevent the computer from being mishandled or stolen. Left Use the illustration and table to identify the components on the left side of the computer. 4 Chapter 2Components Table 2-2 Left-side components and their descriptions Component Description

(1) Battery light When AC power is connected:

White: The battery charge is greater than 90%. Amber: The battery charge is from 0 to 90%. Off: The battery is not charging. When AC power is disconnected (battery not charging):

Blinking amber: The battery has reached a low battery level. When the battery has reached a critical battery level, the battery light begins blinking rapidly. Off: The battery is not charging.

(2)

(3) Power connector Connects an AC adapter. USB Type-C power connectors and Thunderbolt ports with HP Sleep and Charge

(2) Connect a USB device, provides high-speed data transfer, and charges small devices (such as a smartphone), even when the computer is off.

(4) Audio-out (headphone)/Audio-in (microphone) combo jack NOTE: Use a standard USB Type-C charging cable or cable adapter (purchased separately) when charging a small external device. NOTE: Your computer might also support a Thunderbolt docking station. and Connect a display device that has a USB Type-C connector, providing DisplayPort output. Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional standalone microphones. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety, and Environmental Notices. To access this guide:

Select the Search icon in the taskbar, type HP Documentation in the search box, and then select HP Documentation. NOTE: When a device is connected to the jack, the computer speakers are disabled. Display Use the illustration and table to identify the display components. Display 5 Low blue light mode (select products only) Your computer display is shipped from the factory in low blue light mode for improved eye comfort and safety. Also, blue light mode automatically adjusts blue light emissions when you are using the computer at night or for reading. WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is available on the web at http://www.hp.com/ergo. NOTE: Choose the illustration that matches your computer. Table 2-3 Display components and their descriptions Component Description Infrared (IR) LEDs (2) On: Camera is operating.

(1)

(2) Camera (IR)*

Allows you to video chat, record video, and record still images. To use your camera, see Using a camera (select products only) on page 28. Some cameras also allow a facial recognition logon to Windows, instead of a password logon. For more information, see Windows Hello (select products only) on page 48. NOTE: Camera functions vary depending on the camera hardware and software installed on your product. Allows you to video chat, record video, and record still images. To use your camera, see Using a camera (select products only) on page 28. Some cameras also allow a facial recognition logon to Windows, instead of a password logon. For more information, see Windows Hello (select products only) on page 48. NOTE: Camera functions vary depending on the camera hardware and software installed on your product.

(3) Camera (Web)

(4) Webcam LED On: Camera is operating. 6 Chapter 2Components Table 2-3 Display components and their descriptions (continued) Component Description

(5)

(6) Ambient light sensor Antennas (2)**

Detects light levels in the environment to adjust the camera's noise reduction levels. Send and receive wireless signals to communicate with wireless local area networks (WLANs).

*The infrared camera and lenses are not visible from the outside of the computer.

**The antennas are not visible from the outside of the computer. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide:

Select the Search icon in the taskbar, type HP Documentation in the search box, and then select HP Documentation. Table 2-4 Display components and their descriptions Component

(1)

(2) Infrared LEDs (2) Camera (IR)*

Description On: Camera is operating. Allows you to video chat, record video, and record still images. To use your camera, see Using a camera (select products only) on page 28. Some cameras also allow a facial recognition logon to Windows, instead of a password logon. For more information, see Windows Hello (select products only) on page 48. NOTE: Camera functions vary depending on the camera hardware and software installed on your product. Low blue light mode (select products only) 7 Table 2-4 Display components and their descriptions (continued) Component

(3) Camera (Web) Description Allows you to video chat, record video, and record still images. To use your camera, see Using a camera (select products only) on page 28. Some cameras also allow a facial recognition logon to Windows, instead of a password logon. For more information, see Windows Hello (select products only) on page 48. NOTE: Camera functions vary depending on the camera hardware and software installed on your product.

(4)

(5)

(6) Web cam LED On: Camera is operating. Ambient light sensors (2) Antennas (2)**

Detect light levels in the environment to adjust the camera's noise reduction levels. Send and receive wireless signals to communicate with wireless local area networks (WLANs).

*The infrared camera and lenses are not visible from the outside of the computer.

**The antennas are not visible from the outside of the computer. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide:

Select the Search icon in the taskbar, type HP Documentation in the search box, and then select HP Documentation. Keyboard area Keyboards can vary by language. NOTE: The keyboard, including the function keys and power key (select products only), is disabled in stand, tent, and tablet modes. To enable the keyboard, including the power key, change to the clamshell mode. Touchpad The touchpad settings and components are described here. Touchpad settings You learn how to adjust the touchpad settings and components here. Adjusting touchpad settings Use these steps to adjust touchpad settings and gestures. 1. Select the Search icon in the taskbar, type touchpad settings in the search box, and then press enter. 2. Choose a setting. Turning on the touchpad Follow these steps to turn on the touchpad. 1. Select the Search icon in the taskbar, type touchpad settings in the search box, and then press enter. 8 Chapter 2Components 2. Using an external mouse, click the Touchpad button. If you are not using an external mouse, press the Tab key repeatedly until the pointer rests on the touchpad button. Then press the spacebar to select the button. Touchpad components Use the illustration and table to identify the touchpad components. Table 2-5 Touchpad components and their descriptions Component Description Touchpad zone Reads your finger gestures to move the pointer or activate items on the screen. For more information, see Using touchpad and touch NOTE:

screen gestures on page 24. Left touchpad zone Right touchpad zone Functions like the left button on an external mouse. Functions like the right button on an external mouse.

(1)

(2)

(3) Lights Use the illustration and table to identify the lights on the computer. Touchpad components 9

Table 2-6 Lights and their descriptions Component Description

(1)

(2)

(3)

(4)

(5)

(6) Caps lock light On: Caps lock is on, which switches the key input to all capital letters. Privacy key light (select products only) On: Privacy screen is on, which helps prevent side-angle viewing. Mute light Microphone mute light Camera privacy light Power light On: Computer sound is off. Off: Computer sound is on. On: Microphone is off. Off: Microphone is on. On: Camera is disabled. Off: Camera is enabled. On: The computer is on. Blinking (select products only): The computer is in the Sleep state, a power-saving state. The computer shuts off power to the display and other unnecessary components. Off: Depending on your computer model, the computer is off, in Hibernation, or in Sleep. Hibernation is the power-

saving state that uses the least amount of power.

(7) Fn lock light On: The fn key is locked. For more information, see Hot keys

(select products only) on page 15. 10 Chapter 2Components Power key, speakers, and fingerprint reader Fingerprint readers can be located on the touchpad, on a side panel of the computer, or on the top cover below the keyboard. IMPORTANT: To verify that your computer supports fingerprint reader sign-in, select the Search icon in the taskbar, type Sign-in options in the search box, and then select the Sign-on options app. If Fingerprint recognition is not listed as an option, then your notebook does not include a fingerprint reader. Table 2-7 Power key, speakers, and fingerprint reader and their descriptions Component

(1) Speakers Description Produce sound. Power key, speakers, and fingerprint reader 11 Table 2-7 Power key, speakers, and fingerprint reader and their descriptions (continued) Component

(2) Power key

(3) Fingerprint reader (select products only) Description When the computer is off, press the key briefly to turn on the computer. When the computer is on, press the key briefly to initiate Sleep. When the computer is in the Sleep state, press the key briefly to exit Sleep (select products only). When the computer is in Hibernation, press the key briefly to exit Hibernation. IMPORTANT: Pressing and holding down the power key results in the loss of unsaved information. If the computer has stopped responding and shutdown procedures are ineffective, press and hold the power key for at least 4 seconds to turn off the computer. To learn more about your power settings, use the Power icon. Right-click the Power icon

, and then select Power and sleep settings. Allows a fingerprint logon to Windows, instead of a password logon. Swipe down across the fingerprint reader. See Windows Hello

(select products only) on page 48 for details. IMPORTANT: To prevent fingerprint logon issues, make sure when you register your fingerprint that all sides of your finger are registered by the fingerprint reader. Special keys Use the illustration and table to identify the special keys. 12 Chapter 2Components Table 2-8 Special keys and their descriptions Component Description

(1)

(2)

(3)

(4)

(5) esc key fn key Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with another key. Such key combinations are called hot keys. See Hot keys (select products only) on page 15. Windows key Opens the Start menu. Action keys Execute frequently used system functions. NOTE: Pressing the Windows key again will close the Start menu. Power button See Action keys on page 13. When the computer is off, press the button briefly to turn on the computer. When the computer is on, press the button briefly to initiate Sleep. When the computer is in the Sleep state, press the button briefly to exit Sleep (select products only). When the computer is in Hibernation, press the button briefly to exit Hibernation. IMPORTANT: Pressing and holding down the power button results in the loss of unsaved information. If the computer has stopped responding and shutdown procedures are ineffective, press and hold the power button for at least 4 seconds to turn off the computer. To learn more about your power settings, use the Power icon. Right-click the Power icon

, and then select Power and sleep settings.

(6) Camera privacy switch Turns the camera off and on. NOTE: or more information, see Using a camera (select products only) on page 28 Action keys Action keys perform specific functions and vary by computer. To determine which keys are on your computer, look at the icons on your keyboard and match them to the descriptions in this table. To use an action key, press and hold the key. NOTE: On some products, you must press the fn key in combination with the action key. Action keys 13 Table 2-9 Action keys and their descriptions Icon Description Switches the screen image among display devices connected to the system. For example, if a monitor is connected to the computer, repeatedly pressing the key alternates the screen image from computer display to monitor display to simultaneous display on both the computer and the monitor. Helps prevent side-angle viewing from onlookers. If needed, decrease or increase brightness for well-lit or darker environments. Press the key again to turn off the privacy screen. NOTE: This feature is available only on select products. If the feature is not available on your computer, a message is displayed when you press this key. NOTE: To quickly turn on the highest privacy setting, press fn+p. Decreases the screen brightness incrementally as long as you hold down the key. Increases the screen brightness incrementally as long as you hold down the key. Mutes or restores speaker sound. Decreases speaker volume incrementally while you hold down the key. Increases speaker volume incrementally while you hold down the key. Mutes the microphone. Turns the keyboard backlight off or on. On select products, you can adjust the brightness of the keyboard backlight. Press the key repeatedly to adjust the brightness from high (when you first start up the computer), to low, to off. After you adjust the keyboard backlight setting, the backlight will revert to your previous setting each time you turn on the computer. The keyboard backlight will turn off after 30 seconds of inactivity. To turn the keyboard backlight back on, press any key or tap the touchpad (select products only). To conserve battery power, turn off this feature. Press to switch between overtype mode and insert mode. Overtype mode: The cursor overwrites any existing text. Insert mode: The cursor inserts characters at its current position. 14 Chapter 2Components Table 2-9 Action keys and their descriptions (continued) Icon Description Turns the wireless feature on or off. NOTE: A wireless network must be set up before a wireless connection is possible. Executes frequently used tasks. Some tasks might not be available on all products. Opens an application, file, or website Enters frequently used text into a permanent clipboard Ability to change system profiles Ability to change system properties Executes user-defined key sequences NOTE: The action key feature is enabled at the factory. On select products only, you can disable this feature by pressing and holding the fn key and the left shift key. The fn lock light will turn on. After you have disabled the action key feature, you can still perform each function by pressing the fn key in combination with the appropriate action key. Hot keys (select products only) A hot key is the combination of the fn key and another key. Use the table to identify the hot keys. To use a hot key:

Press the fn key, and then press one of the keys listed in the following table. Table 2-10 Hot keys and their descriptions Key Description C E R S W Turns on scroll lock. Turns on the insert function. Breaks the operation. Sends a programing query. Pauses the operation. Bottom Use the illustration and table to identify the bottom components. Hot keys (select products only) 15 Table 2-11 Bottom components and their descriptions Component

(1)

(2) Speakers (2) Vent Description Produce sound. Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Labels The labels affixed to the computer provide information you might need when you troubleshoot system problems or travel internationally with the computer. Labels might be in paper form or imprinted on the product. IMPORTANT: Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the service door, on the back of the display, or on the bottom of a tablet kickstand. Service labelProvides important information to identify your computer. When contacting support, you might be asked for the serial number, the product number, or the model number. Locate this information before you contact support. Your service label will resemble one of the examples shown below. Refer to the illustration that most closely matches the service label on your computer. 16 Chapter 2Components Table 2-12 Service label components Component

(1)

(2)

(3) Serial number Product ID HP product name Table 2-13 Service label components Component

(1)

(2)

(3)

(4) HP product name Product ID Serial number Warranty period Table 2-14 Service label components Component

(1)

(2)

(3) HP product name Warranty period Product ID Labels 17 Table 2-14 Service label components (continued) Component

(4) Serial number Regulatory labelsProvide regulatory information about the computer. Wireless certification labelsProvide information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. 18 Chapter 2Components 3 Network connections Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites by using your computer and a wired or wireless network connection. This chapter helps you get connected to that world. Connecting to a wireless network Your computer might be equipped with one or more wireless devices. WLAN deviceConnects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your computer communicates with a wireless router or a wireless access point. HP Mobile Broadband Module (select products only)A wireless wide area network (WWAN) device that gives you wireless connectivity over a much larger area. Mobile network operators install base stations

(similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries. Bluetooth deviceCreates a personal area network (PAN) to connect to other Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close togethertypically within 10 m (approximately 33 ft) of each other. Using the wireless controls You can control the wireless devices in your computer using one or more of these features. Wireless button (also called airplane mode key or wireless key) Operating system controls Wireless button The computer might have a wireless button, one or more wireless devices, and one or two wireless lights. All the wireless devices on your computer are enabled at the factory. The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. Operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, and diagnose and repair network problems. Depending on your computer model, you have several methods to access operating system controls:

Select the Search icon in the taskbar, type control panel in the search box, and then select Control Panel. or On the taskbar, right-click the network status icon, and then select Network and Internet settings. Network connections 19 Connecting to a WLAN Before you can connect to a WLAN with this procedure, you must first set up internet access. NOTE: When you are setting up internet access in your home, you must establish an account with an internet service provider (ISP). To purchase internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the internet service. 1. 2. Be sure that the WLAN device is on. On the taskbar, select the network status icon, and then select the right arrow icon next to the Wi-Fi button to see the available networks. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Enter the code, and then select Next to complete the connection. NOTE:

If no WLANs are listed, you might be out of range of a wireless router or access point. NOTE: Depending on your computer model, if you do not see the WLAN that you want to connect to, follow one of these methods:

On the taskbar, right-click the network status icon, and then select Network and Internet settings. Select WiFi, and then select Manage known networks. Select the Add network button. A list of options is displayed, which allows you to manually search for and connect to a network or to create a new network connection. 3. Follow the on-screen instructions to complete the connection. After the connection is made, select the network status icon at the far right of the taskbar to verify the name and status of the connection. NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. Using HP Mobile Broadband (select products only) Your HP Mobile Broadband computer has built-in support for mobile broadband service. Your new computer, when used with a mobile operators network, gives you the freedom to connect to the internet, send email, or connect to your corporate network without the need for Wi-Fi hotspots. You might need the HP Mobile Broadband Module IMEI number, MEID number, or both to activate mobile broadband service. The number might be printed on a label located on the bottom of your computer, inside the battery bay, under the service door, or on the back of the display. 1. 2. 3. On the taskbar, right-click the network status icon. Select Network and Internet settings. In the Network and Internet window, select Cellular, and then select Mobile operator settings. 20 Chapter 3Network connections Some mobile network operators require the use of a SIM card. A SIM card contains basic information about you, such as a personal identification number (PIN), as well as network information. Some computers include a SIM card that is preinstalled. If the SIM card is not preinstalled, it might be provided in the HP Mobile Broadband information that is included with your computer or the mobile network operator might provide it separately from the computer. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband information included with your computer. Using Bluetooth wireless devices (select products only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices. Computers (desktop, notebook) Phones (cellular, cordless, smartphone) Imaging devices (printer, camera) Audio devices (headset, speakers) Mouse External keyboard Connecting Bluetooth devices Before you can use a Bluetooth device, you must establish a Bluetooth connection. 1. 2. 3. 4. Select the Search icon in the taskbar, type bluetooth in the search box, and then select Bluetooth and other devices settings. Turn on Bluetooth, if it is not already turned on. Select Add device, and then in the Add a device dialog box, select Bluetooth. Select your device from the list, and then follow the on-screen instructions. If the device requires verification, a pairing code is displayed. On the device that you are adding, NOTE:

follow the on-screen instructions to verify that the code on your device matches the pairing code. For more information, see the documentation provided with the device. If your device does not appear in the list, be sure that Bluetooth on that device is turned on. Some NOTE:

devices might have additional requirements; see the documentation provided with the device. Connecting to a wired network Select products might allow a local area network (LAN) connection, which uses a network cable. The cable is sold separately. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a telephone cable into an RJ-45 (network) jack. Using Bluetooth wireless devices (select products only) 21

Connecting to a local area network (LAN) (select products only) Use a LAN connection if you want to connect the computer directly to a router in your home (instead of working wirelessly) or if you want to connect to an existing network at your office. To connect the network cable, follow these steps:

NOTE: A feature called HP LAN-Wireless Protection might be enabled on your computer. It closes your wireless (Wi-Fi) or WWAN connection when you connect directly to a LAN. For more information about HP LAN-Wireless Protection, see Using HP LAN-Wireless Protection (select products only) on page 22. If there is no RJ-45 port on the computer, connecting to a LAN requires a network cable and a network jack or an optional docking device or expansion product. 1. Plug the network cable into the network jack (1) on the computer or on an optional docking device or expansion product. 2. Plug the other end of the network cable into a network wall jack (2) or router. If the network cable contains noise suppression circuitry (3), which prevents interference from NOTE:

TV and radio reception, orient the circuitry end of the cable toward the computer. Using HP LAN-Wireless Protection (select products only) In a LAN environment, you can set HP LAN-Wireless Protection to safeguard your LAN network from unauthorized wireless access. When HP LAN-Wireless Protection is enabled, the WLAN (Wi-Fi) or WWAN connection is turned off when the computer is connected directly to a LAN. To turn on and customize HP LAN-Wireless Protection:

1. Start Computer Setup (BIOS). Computers or tablets with keyboards:

Turn on or restart the computer, and before the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

22 Chapter 3Network connections 2. 3. 4. Turn on or restart the tablet, and then quickly hold down the volume down button until the Startup menu is displayed. Tap f10 to enter Computer Setup. Select Advanced, and then select Built-in Device Options. Select the check box for LAN/WLAN Auto Switching, LAN/WWAN Auto Switching, or both to turn off WLAN connections, WWAN connections, or both when connected to a LAN network. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes take effect when the computer restarts. Using HP MAC Address Pass Through (select products only) MAC Address Pass Through provides a customizable way of identifying your computer and its communications on networks. This system MAC address provides unique identification even when your computer is connected through a network adapter. This address is enabled by default. To customize MAC Address Pass Through:

1. Start Computer Setup (BIOS). Computers or tablets with keyboards:

Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

Turn on or restart the tablet, and then quickly hold down the volume down button until the Startup menu is displayed. Tap f10 to enter Computer Setup. 2. 3. 4. 5. Select Advanced, and then select MAC Address Pass Through. In the box to the right of Host Based MAC Address, select either System Address to enable MAC address Pass Through or Custom Address to customize the address. If you selected Custom, select MAC ADDRESS, enter your customized system MAC address, and then press enter to save the address. If the computer has an embedded LAN and you would like to use the embedded MAC address as the system MAC address, select Reuse Embedded LAN Address. or Select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes take effect when the computer restarts. Using HP MAC Address Pass Through (select products only) 23 4 Navigating the screen Depending on your computer model, you can navigate the computer screen using one or more methods. Use touch gestures directly on the computer screen. Use touch gestures on the touchpad. Use an optional mouse or keyboard (purchased separately). Use an on-screen keyboard. Use a pointing stick. Using touchpad and touch screen gestures The touchpad helps you navigate the computer screen and control the pointer using simple touch gestures. You can also use the left and right touchpad buttons as you would use the corresponding buttons on an external mouse. To navigate a touch screen (select products only), touch the screen directly using gestures described in this chapter. To customize gestures and see videos of how they work, select the Search icon in the taskbar, type control panel in the search box, select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. Some products include a precision touchpad, which provides enhanced gesture functionality. To determine if you have a precision touchpad and find additional information, follow these steps, depending on your computer:

Select Start, select Settings, select Bluetooth & devices, and then select Touchpad. NOTE: Unless noted, gestures can be used on both the touchpad and a touch screen. Tap Point to an item on the screen, and then tap one finger on the touchpad zone or touch screen to select the item. Double-tap an item to open it. Two-finger pinch zoom Use the two-finger pinch zoom to zoom out or in on images or text. 24 Chapter 4Navigating the screen Zoom out by placing two fingers apart on the touchpad zone or touch screen and then moving your fingers together. Zoom in by placing two fingers together on the touchpad zone or touch screen and then moving your fingers apart. Two-finger slide (touchpad and precision touchpad) Place two fingers slightly apart on the touchpad zone and then drag them up, down, left, or right to move up, down, or sideways on a page or image. Two-finger tap (touchpad and precision touchpad) Tap two fingers on the touchpad zone to open the options menu for the selected object. NOTE: The two-finger tap performs the same function as right-clicking with a mouse. Three-finger tap (touchpad and precision touchpad) By default, the three-finger tap opens the search box. Tap three fingers on the touchpad zone to perform the gesture. Two-finger slide (touchpad and precision touchpad) 25 To change the function of this gesture on a precision touchpad, select Start, select Settings, select Bluetooth

& devices, and then select Touchpad. Under Three-finger gestures, in the Taps box, select a gesture setting. Four-finger tap (touchpad and precision touchpad) By default, the four-finger tap opens the Action Center. Tap four fingers on the touchpad zone to perform the gesture. To change the function of this gesture on a precision touchpad, select Start, select Settings, select Bluetooth

& devices, and then select Touchpad. Under Four-finger gestures, in the Taps box, select a gesture setting. Three-finger swipe (touchpad and precision touchpad) By default, the three-finger swipe switches between open apps and the desktop. Swipe three fingers away from you to see all open windows. Swipe three fingers toward you to show the desktop. Swipe three fingers left or right to switch between open windows. To change the function of this gesture on a precision touchpad, select Start, select Settings, select Bluetooth

& devices, and then select Touchpad. Under Three-finger gestures, in the Swipes box, select a gesture setting. Four-finger swipe (precision touchpad) By default, the four-finger swipe switches between open desktops. Swipe four fingers away from you to see all open windows. Swipe four fingers toward you to show the desktop. Swipe four fingers left or right to switch between desktops. 26 Chapter 4Navigating the screen To change the function of this gesture, select Start, select Settings, select Bluetooth & devices, and then select Touchpad. Under Four-finger gestures, in the Swipes box, select a gesture setting. One-finger slide (touch screen) Use the one-finger slide to pan or scroll through lists and pages, or to move an object. To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. To move an object, press and hold your finger on an object, and then drag your finger to move the object. Using an optional keyboard or mouse An optional keyboard or mouse allows you to type, select items, scroll, and perform the same functions as you do using touch gestures. The keyboard also allows you to use action keys and hot keys to perform specific functions. Using an on-screen keyboard (select products only) These instructions help you learn to use the on-screen keyboard. You can display the on-screen keyboard in several ways:

1. Select the Search icon in the taskbar, type on-screen keyboard in the search box, and then select On-Screen Keyboard. or 2. Press the Windows key +ctrl+o. NOTE: Suggested words might be displayed above the on-screen keyboard. Tap a word to select it. NOTE: Action keys and hot keys do not display or function on the on-screen keyboard. One-finger slide (touch screen) 27 5 Entertainment features Use your HP computer for business or pleasure to meet with others via the camera, mix audio and video, or connect external devices like a projector, monitor, TV, or speakers. See Components on page 3 to locate the audio, video and camera features on your computer. Using a camera (select products only) Your computer has one or more cameras that enable you to connect with others for work or play. Most cameras allow you to video chat, record video, and record still images. Cameras can be front facing or rear facing. To determine which camera or cameras are on your product, see Components on page 3. To use your camera, select the Search icon in the taskbar, type camera in the search box, and then select Camera. Some cameras also feature HD (high-definition) capability, apps for gaming, or facial recognition software like Windows Hello. See Security on page 40 for details about using Windows Hello. You can enhance your computer privacy by covering the lens with the camera privacy cover. By default, the camera lens is uncovered, but you can slide the camera privacy cover to block the camera's view. To use the camera, slide the camera privacy cover in the opposite direction to reveal the lens. Using audio You can download and listen to music, stream audio content (including radio) from the web, record audio, or mix audio and video to create multimedia. You can also play music CDs on the computer (on select products) or attach an external optical drive to play CDs. To enhance your listening enjoyment, attach headphones or speakers. Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port or to the audio-out

(headphone)/audio-in (microphone) combo jack on your computer or on a docking station. To connect wireless speakers to your computer, follow the device manufacturer's instructions. Before connecting speakers, lower the volume setting. Connecting headphones You can connect wired headphones to the audio-out (headphone)/audio-in (microphone) combo jack on your computer. WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety, and Environmental Notices. To access this guide:

28 Chapter 5Entertainment features Select the Search icon in the taskbar, type HP Documentation in the search box, and then select HP Documentation. To connect wireless headphones to your computer, follow the device manufacturer's instructions. Connecting headsets You can connect a headset to the audio-out (headphone)/audio-in (microphone) combo jack on your computer. A stand-alone microphone can be plugged into a USB port. See your manufacturer's instructions. WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety, and Environmental Notices. To access this guide:

Select the Search icon in the taskbar, type HP Documentation in the search box, and then select HP Documentation. Headphones combined with a microphone are called headsets. You can connect wired headsets to the audio-out (headphone)/audio-in (microphone) combo jack on your computer. To connect wireless headsets to your computer, follow the device manufacturer's instructions. Using sound settings Use sound settings to adjust system volume, change system sounds, or manage audio devices. Viewing or changing sound settings Use these instructions to view or change sound settings. Select the Search icon in the taskbar, type control panel in the search box, and then select Control Panel, select Hardware and Sound, and then select Sound. Using the control panel to view and control audio settings You can view or change sound settings using the audio control panel. Your computer might include an enhanced sound system by Bang & Olufsen, DTS, Beats audio, or another provider. As a result, your computer might include advanced audio features that can be controlled through an audio control panel specific to your audio system. Use the audio control panel to view and control audio settings. Select the Search icon in the taskbar, type control panel in the search box, select Control Panel, select Hardware and Sound, select Sound, and then select the audio control panel specific to your system. Using video Your computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer when you are not connected to a network. Connecting headsets 29 To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external monitor, projector, or TV. IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information about using your video features, refer to HP Support Assistant. Connecting a DisplayPort device using a USB Type-C cable (select products only) Connect a DisplayPort device using a USB Type-C cable. NOTE: To connect a USB Type-C DisplayPort device to your computer, you need a USB Type-C cable, purchased separately. To see video or high-resolution display output on an external DisplayPort device, connect the DisplayPort device according to the following instructions:

1. Connect one end of the USB Type-C cable to the USB SuperSpeed port and DisplayPort connector on the computer. 2. 3. Connect the other end of the cable to the external DisplayPort device. Press f4 to cycle through four display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and external device. Extend: View the screen image extended across both the computer and external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. For best results, especially if you choose the Extend option, increase the screen resolution of the NOTE:

external device, as follows. Select the Start button, select Settings, select System, and then select Display. Under Scale & layout, select the appropriate resolution, and then select Keep changes. 30 Chapter 5Entertainment features Discovering and connecting wired displays using MultiStream Transport MultiStream Transport (MST) allows you to connect multiple wired display devices to your computer by connecting to the VGA port or DisplayPort connectors on your computer and also to the VGA port or DisplayPort connectors on a hub or an external docking station. You can connect in several ways, depending on the type of graphics controller installed on your computer and whether your computer includes a built-in hub. Go to Device Manager to find out what hardware is installed on your computer. Connecting displays to computers with AMD or NVIDIA graphics (with an optional hub) To set up multiple display devices, follow these steps. NOTE: With an AMD graphics controller and optional hub, you can connect up to six external display devices. NOTE: With an NVIDIA graphics controller and optional hub, you can connect up to four external display devices. 1. 2. 3. Connect an external hub (purchased separately) to the DisplayPort (DP) connector on your computer, using a DP-to-DP cable (purchased separately). Be sure that the hub power adapter is connected to AC power. Connect your external display devices to the VGA port or DisplayPort connectors on the hub. To see all of your connected display devices, select the Search icon in the taskbar, type device manager in the search box, and then select the Device Manager app. If you don't see all of your connected displays, be sure that each is connected to the correct port on the hub. NOTE: Multiple display choices include Duplicate, which mirrors your computer screen on all enabled display devices, or Extend, which spans your computer screen across all enabled display devices. Connecting displays to computers with Intel graphics (with an optional hub) To set up multiple display devices, follow these steps. NOTE: With an Intel graphics controller and optional hub, you can connect up to three display devices. 1. Connect an external hub (purchased separately) to the DisplayPort connector on your computer, using a DP-to-DP cable (purchased separately). Be sure that the hub power adapter is connected to AC power. 2. Connect your external display devices to the VGA port or DisplayPort connectors on the hub. 3. When Windows detects a monitor connected to the DisplayPort hub, the DisplayPort Topology Notification dialog box is displayed. Select the appropriate options to configure your displays. Multiple display choices include Duplicate, which mirrors your computer screen on all enabled display devices, or Extend, which extends the screen image across all enabled display devices. If this dialog box does not appear, be sure that each external display device is connected to the NOTE:

correct port on the hub. Select the Start button, select Settings, select System, and then select Display. Under Scale & layout, select the appropriate resolution, and then select Keep changes. Connecting displays to computers with Intel graphics (with a built-in hub) To set up multiple display devices, follow these steps. Discovering and connecting wired displays using MultiStream Transport 31 With your internal hub and Intel graphics controller, you can connect up to three display devices in the following configurations:

Two 1920 1200 DisplayPort monitors connected to the computer and one 1920 1200 VGA monitor connected to an optional docking station One 2560 1600 DisplayPort monitor connected to the computer and one 1920 1200 VGA monitor connected to an optional docking station 1. Connect your external display devices to the VGA port or DisplayPort connectors on the computer base or the docking station. 2. When Windows detects a monitor connected to the DisplayPort hub, the DisplayPort Topology Notification dialog box is displayed. Select the appropriate options to configure your displays. Multiple display choices include Duplicate, which mirrors your computer screen on all enabled display devices, or Extend, which extends the screen image across all enabled display devices. NOTE:

If this dialog box does not appear, be sure that each external display device is connected to the correct port on the hub. Select the Start button, select Settings, select System, and then select Display. Under Scale & layout, select the appropriate resolution, and then select Keep changes. Using data transfer Your computer is a powerful entertainment device that enables you to transfer photos, videos, and movies from your USB devices to view on your computer. To enhance your viewing enjoyment, use one of the USB Type-C ports on the computer to connect a USB device, such as a cell phone, camera, activity tracker, or smartwatch, and transfer the files to your computer. IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information about using your USB Type-C features, refer to HP Support Assistant. Connecting devices to a USB Type-C port (select products only) To connect devices to a USB Type-C port, follow these steps. NOTE: To connect a USB Type-C device to your computer, you need a USB Type-C cable, purchased separately. 32 Chapter 5Entertainment features 1. Connect one end of the USB Type-C cable to the USB Type-C port on the computer. 2. Connect the other end of the cable to the external device. Connecting devices to a USB Type-C port (select products only) 33 6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power and an external power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Some power management features described in this chapter might not be available on your computer. Using Sleep and Hibernation Windows has two power-saving states, Sleep and Hibernation. SleepThe Sleep state automatically initiates after a period of inactivity. Your work is available in memory, allowing you to resume your work quickly. You can also initiate Sleep manually. Depending on your computer model, the Sleep state might also support Modern Standby mode. This mode keeps some internal operations awake and enables your computer to receive web notifications, such as emails, while in Sleep. For more information, see Initiating and exiting Sleep on page 34. HibernationThe Hibernation state is automatically initiated if the battery reaches a critical level or the computer has been in the Sleep state for an extended period of time. In the Hibernation state, your work is saved to a hibernation file and the computer powers down. You can also initiate Hibernation manually. For more information, see Initiating and exiting Hibernation (select products only) on page 35. IMPORTANT: Several well-known vulnerabilities exist when a computer is in the Sleep state. To prevent an unauthorized user from accessing data on your computer, even encrypted data, HP recommends that you always initiate Hibernation instead of Sleep anytime the computer will be out of your physical possession. This practice is particularly important when you travel with your computer. IMPORTANT: To reduce the risk of possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a disc or an external media card. Initiating and exiting Sleep You can initiate Sleep in several ways. Select the Start button, select the Power icon, and then select Sleep. Close the display (select products only). Press the Sleep hot key (select products only); for example, fn+f1 or fn+f12. Briefly press the power button (select products only). You can exit Sleep in any of the following ways:

Briefly press the power button. If the computer is closed, raise the display (select products only). Press a key on the keyboard (select products only). Tap the touchpad (select products only). 34 Chapter 6Managing power When the computer exits Sleep, your work returns to the screen. IMPORTANT:

password before your work returns to the screen. If you have set a password to be required on exiting Sleep, you must enter your Windows Initiating and exiting Hibernation (select products only) You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. 2. 3. Select the Search icon in the taskbar, type power in the search box, and then select Choose a power plan. In the left pane, select Choose what the power buttons do (wording might vary by product). Depending on your product, you can enable Hibernation for battery power or external power in any of the following ways:

Power buttonUnder Power and sleep buttons and lid settings (wording might vary by product), select When I press the power button, and then select Hibernate. Sleep button (select products only)Under Power and sleep buttons and lid settings (wording might vary by product), select When I press the sleep button, and then select Hibernate. Lid (select products only)Under Power and sleep buttons and lid settings (wording might vary by product), select When I close the lid, and then select Hibernate. Power menuSelect Change Settings that are currently unavailable, and then, under Shutdown settings, select the Hibernate check box. The Power menu can be accessed by selecting the Start button. 4. Select Save changes. To initiate Hibernation, use the method that you enabled in step 3. To exit Hibernation, briefly press the power button. IMPORTANT:

Windows password before your work returns to the screen. If you have set a password to be required on exiting Hibernation, you must enter your Shutting down (turning off) the computer The Shut down command closes all open programs, including the operating system, and then turns off the display and the computer. Shut down the computer when it will be unused and disconnected from external power for an extended period. IMPORTANT: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The recommended procedure is to use the Windows Shut down command. If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by briefly NOTE:

pressing the power button. 1. Save your work and close all open programs. Initiating and exiting Hibernation (select products only) 35 2. Select the Start button, select the Power icon, and then select Shut down. If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:

Press ctrl+alt+delete, select the Power icon, and then select Shut down. Press and hold the power button for at least 4 seconds. If your computer has a user-replaceable battery (select products only), disconnect the computer from external power, and then remove the battery. Using the Power icon The Power icon is located on the Windows taskbar. The Power icon allows you to quickly access power settings and view the remaining battery charge. To view the percentage of remaining battery charge, place the mouse pointer over the Power icon

. To view power settings, right-click the Power icon

, and then select Power and sleep settings. Different power icons indicate whether the computer is running on battery or external power. Placing the mouse pointer over the icon reveals a message if the battery has reached a low or critical battery level. Running on battery power When the computer has a charged battery and is not plugged into external power, the computer runs on battery power. When the computer is off and unplugged from external power, the battery slowly discharges. The computer displays a message when the battery reaches a low or critical battery level. WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Computer battery life varies, depending on power management settings, programs running on the computer, screen brightness, external devices connected to the computer, and other factors. NOTE: Select computer products can switch between graphic controllers to conserve battery charge. Using HP Fast Charge (select products only) The HP Fast Charge feature allows you to quickly charge your computer battery. Charging time might vary by 10%. When the remaining battery charge is between 0 and 50%, the battery charges to 50% of full capacity in no more than 30 to 45 minutes, depending on your computer model. To use HP Fast Charge, shut down your computer, and then connect the AC adapter to your computer and to external power. Displaying battery charge To view the percentage of remaining battery charge, place the mouse pointer over the Power icon

. 36 Chapter 6Managing power Finding battery information in HP Support Assistant (select products only) Follow these steps to access battery information. 1. Select the Search icon in the taskbar, type support in the search box, and then select the HP Support Assistant app. or Select the question mark icon (select products only) in the taskbar. 2. Select Fixes & Diagnostics, select Check your battery, and then select Launch. If HP Battery Check indicates that your battery should be replaced, contact support. HP Support Assistant provides the following tools and information about the battery:

HP Battery Check Information about battery types, specifications, life cycles, and capacity Conserving battery power Follow these steps to conserve battery power and maximize battery life. Lower the brightness of the display. Turn off wireless devices when you are not using them. Disconnect unused external devices that are not plugged into an external power source, such as an external hard drive connected to a USB port. Stop, disable, or remove any external media cards that you are not using. Before you leave your work, initiate Sleep or shut down the computer. Identifying low battery levels When a battery that is the sole power source for the computer reaches a low or critical battery level, the computer warns you in one of several ways. The battery light (select products only) indicates a low or critical battery level. or The Power icon shows a low or critical battery notification. NOTE:

For additional information about the Power icon, see Using the Power icon on page 36. The computer takes the following actions for a critical battery level:

If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly in the Sleep state and then shuts down and loses any unsaved information. If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates Hibernation. Resolving a low battery level You can quickly resolve low battery level conditions. Finding battery information in HP Support Assistant (select products only) 37 Resolving a low battery level when external power is available Connect one of the following to the computer and to external power. AC adapter Optional docking device or expansion product Optional power adapter purchased as an accessory from HP Resolving a low battery level when no power source is available Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation When the battery level is low and you cannot bring the computer out of Hibernation, connect the AC adapter. 1. 2. Connect the AC adapter to the computer and to external power. Exit Hibernation by pressing the power button. Factory-sealed battery To monitor the status of the battery, or if the battery is no longer holding a charge, run HP Battery Check in the HP Support Assistant app (select products only). 1. Select the Search icon on the taskbar, type support in the search box, and then select the HP Support Assistant app. or Select the question mark icon (select products only) on the taskbar. 2. Select Fixes & Diagnostics, select Check your battery, and then select Launch. If HP Battery Check indicates that your battery should be replaced, contact support. The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. Running on external power For information about connecting to external power, see the Setup Instructions poster provided in the computer box. The computer does not use battery power when the computer is connected to external power with an approved AC adapter or an optional docking device or expansion product. WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. WARNING! Do not charge the computer battery while you are aboard aircraft. Connect the computer to external power under any of the following conditions:

When charging or calibrating a battery When installing or updating system software When updating the system BIOS 38 Chapter 6Managing power When writing information to a disc (select products only) When running Disk Defragmenter on computers with internal hard drives When performing a backup or recovery When you connect the computer to external power:

The battery begins to charge. The Power icon changes appearance. When you disconnect external power:

The computer switches to battery power. The Power icon changes appearance. Running on external power 39 7 Security Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, Computer Setup

(BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code. NOTE: Some security features listed in this chapter might not be available on your computer. Protecting the computer Standard security features provided by the Windows operating system and Computer Setup (BIOS, which runs under any operating system) can protect your personal settings and data from a variety of risks. NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. NOTE: Before you send your computer for service, back up and delete confidential files, and remove all password settings. NOTE: Some features listed in this chapter may not be available on your computer. NOTE: Your computer supports Computrace, which is an online security-based tracking and recovery service available in select regions. If the computer is stolen, Computrace can track the computer if the unauthorized user accesses the Internet. You must purchase the software and subscribe to the service to use Computrace. For information about ordering the Computrace software, go to http://www.hp.com. Table 7-1 Security solutions Computer risk Security feature Unauthorized use of the computer HP Client Security software, in combination with a password, smart card, contactless card, registered fingerprints, or other authentication credential BIOS power-on password Unauthorized access to Computer Setup (BIOS) BIOS administrator password in Computer Setup*

Unauthorized access to the contents of a hard drive DriveLock password (select products only) in Computer Setup*

Unauthorized startup from an optional external optical drive

(select products only), optional external hard drive (select products only), or internal network adapter Boot options feature in Computer Setup*

Unauthorized access to a Windows user account Windows user password Unauthorized access to data Windows BitLocker Unauthorized removal of the computer Security cable slot (used with an optional security cable on select products only)

*Computer Setup is an embedded, ROM-based utility that can be used even when the operating system is not working or will not load. You can use a pointing device (touchpad, pointing stick, or USB mouse) or the keyboard to navigate and make selections in Computer Setup. NOTE: On tablets without keyboards, you can use the touch screen. 40 Chapter 7Security Using passwords A password is a group of characters that you choose to secure your computer information. You can set several types of passwords, depending on how you want to control access to your information. You can set passwords in Windows or in Computer Setup, which is preinstalled on the computer. BIOS administrator, power-on, and DriveLock passwords are set in Computer Setup and are managed by the system BIOS. Windows passwords are set only in the Windows operating system. If you forget both the DriveLock user password and the DriveLock master password set in Computer Setup, the hard drive that is protected by the passwords is permanently locked and can no longer be used. You can use the same password for a Computer Setup feature and for a Windows security feature. Use the following tips for creating and saving passwords:

When creating passwords, follow requirements set by the program. Do not use the same password for multiple applications or websites, and do not reuse your Windows password for any other application or website. Use the Password Manager feature of HP Client Security to store your user names and passwords for your websites and applications. You can securely read them in the future if they cannot be remembered. Do not store passwords in a file on the computer. The following tables list commonly used Windows and BIOS administrator passwords and describe their functions. Setting passwords in Windows Windows passwords can help protect your computer from unauthorized access. Table 7-2 Types of Windows passwords and their functions Password Function Administrator password*

Protects access to a Windows administrator-level account. User password*

Protects access to a Windows user account.

*For information about setting a Windows administrator password or a Windows user password, select the Search icon in the taskbar, type support in the search box, and then select the HP Support Assistant app. NOTE: Setting the Windows administrator password does not set the BIOS administrator password. Setting passwords in Computer Setup Computer Setup passwords provide additional layers of security for your computer. Using passwords 41 Table 7-3 Types of Computer Setup passwords and their functions Password Function BIOS administrator password*

Protects access to Computer Setup. Power-on password DriveLock master password*

DriveLock user password*

NOTE:

If features have been enabled to prevent removing the BIOS administrator password, you may not be able to remove it until those features have been disabled. Must be entered each time you turn on or restart the computer. If you forget your power-on password, you cannot turn on or restart the computer. Protects access to the internal hard drive that is protected by DriveLock, and is set under DriveLock Passwords during the enable process. This password is also used to remove DriveLock protection. Protects access to the internal hard drive that is protected by DriveLock, and is set under DriveLock Passwords during the enable process.

*For details about each of these passwords, see the following topics. Managing a BIOS administrator password To set, change, or delete this password, follow these steps. Setting a new BIOS administrator password A BIOS administrator password helps prevent unauthorized access to Computer Setup. Use these instructions to set a new BIOS administrator password. 1. Start Computer Setup. Computers or tablets with keyboards:

Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. Select Security, select Create BIOS administrator password or Set Up BIOS administrator Password

(select products only), and then press enter. 3. When prompted, type a password. 4. When prompted, type the new password again to confirm. 5. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. 42 Chapter 7Security Changing a BIOS administrator password Use these instructions to change a BIOS administrator password. 1. Start Computer Setup. Computers or tablets with keyboards:

Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. 3. Enter your current BIOS administrator password. Select Security, select Change BIOS administrator Password or Change Password (select products only), and then press enter. 4. When prompted, type your current password. 5. When prompted, type your new password. 6. When prompted, type your new password again to confirm. 7. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. Deleting a BIOS administrator password Use these instructions to delete a BIOS administrator password. 1. Start Computer Setup. Computers or tablets with keyboards:

Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. 3. Enter your current BIOS administrator password. Select Security, select Change BIOS administrator Password or Change Password (select products only), and then press enter. 4. When prompted, type your current password. 5. When prompted for the new password, leave the field empty, and then press enter. 6. When prompted to type your new password again, leave the field empty, and then press enter. Changing a BIOS administrator password 43 7. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. Entering a BIOS administrator password At the BIOS administrator password prompt, type your password (using the same keys that you used to set the password), and then press enter. After two unsuccessful attempts to enter the BIOS administrator password, you must restart the computer and try again. Using DriveLock Security Options DriveLock protection prevents unauthorized access to the contents of a hard drive. DriveLock can be applied only to the internal hard drives of the computer. After DriveLock protection is applied to a drive, the appropriate password must be entered to access the drive. The drive must be inserted into the computer or an advanced port replicator for it to be unlocked. DriveLock Security Options offers the following features:

Automatic DriveLockSee Selecting Automatic DriveLock (select products only) on page 44. Set DriveLock Master PasswordSee Selecting manual DriveLock on page 45. Enable DriveLockSee Enabling DriveLock and setting a DriveLock user password on page 46. Selecting Automatic DriveLock (select products only) You must set a BIOS administrator password before you can enable Automatic DriveLock. When Automatic DriveLock is enabled, a random DriveLock user password and a DriveLock master password derived from the BIOS administrator password are created. When the computer is turned on, the random user password automatically unlocks the drive. If the drive is moved to another computer, you must enter the BIOS administrator password for the original computer at the DriveLock password prompt to unlock the drive. Enabling Automatic DriveLock To enable Automatic DriveLock, follow these steps. 1. Start Computer Setup. Computers or tablets with keyboards:

a. b. Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

a. b. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. At the BIOS administrator password prompt, enter the BIOS administrator password, and then press enter. 44 Chapter 7Security 3. 4. 5. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Use the enter key, left mouse click, or touch screen to select the Automatic DriveLock check box. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Disabling Automatic DriveLock To disable Automatic DriveLock, follow these steps. 1. Start Computer Setup. Computers or tablets with keyboards:

a. b. Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

a. b. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. 3. 4. 5. 6. At the BIOS administrator password prompt, enter the BIOS administrator password, and then press enter. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Select an internal hard drive, and then press enter. Use the enter key, left mouse click, or touch screen to clear the Automatic DriveLock check box. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Entering an Automatic DriveLock password While Automatic DriveLock is enabled and the drive remains attached to the original computer, you will not be prompted to enter a DriveLock password to unlock the drive. However, if the drive is moved to another computer, or the system board is replaced on the original computer, you will be prompted to provide the DriveLock password. If this happens, at the DriveLock Password prompt, type the BIOS administrator password for the original computer (using the same kind of keys you used to set the password), and then press enter to unlock the drive. After three incorrect attempts to enter the password, you must shut down the computer and try again. Selecting manual DriveLock To manually apply DriveLock protection to an internal hard drive, you must set a master password, and DriveLock must be enabled in Computer Setup. Disabling Automatic DriveLock 45 IMPORTANT: To prevent a DriveLock-protected hard drive from becoming permanently unusable, record the DriveLock user password and the DriveLock master password in a safe place away from your computer. If you forget both DriveLock passwords, the hard drive will be permanently locked and can no longer be used. Note the following considerations about using DriveLock protection:

After DriveLock protection is applied to a hard drive, you can access the hard drive only by entering either the DriveLock user password or the master password. The owner of the DriveLock user password should be the day-to-day user of the protected hard drive. The owner of the DriveLock master password may be either a system administrator or the day-to-day user. The DriveLock user password and the DriveLock master password can be identical. Setting a DriveLock master password To set a DriveLock master password, follow these steps. 1. Start Computer Setup. Computers or tablets with keyboards:

a. b. Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

a. b. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. Select Security, make the selection for Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Select the hard drive you want to protect, and then press enter. Select Set DriveLock Master Password, and then press enter. Carefully read the warning. Follow the on-screen instructions to set a DriveLock master password. 2. 3. 4. 5. 6. NOTE: You can enable DriveLock and set a DriveLock user password before exiting from Computer Setup. For more information, see Enabling DriveLock and setting a DriveLock user password on page 46. 7. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Enabling DriveLock and setting a DriveLock user password To enable DriveLock and set a DriveLock user password, follow these steps. 46 Chapter 7Security 1. Start Computer Setup. Computers or tablets with keyboards:

a. b. Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

a. b. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Select the hard drive you want to protect, and then press enter. Select Enable DriveLock and then press enter. Carefully read the warning. Follow the on-screen instructions to set a DriveLock user password and enable DriveLock. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. 2. 3. 4. 5. 6. 7. Disabling DriveLock To disable DriveLock, follow these steps. 1. Start Computer Setup. Computers or tablets with keyboards:

a. b. Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

a. b. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Select the hard drive you want to manage, and then press enter. Select Disable DriveLock, and then press enter. Follow the on-screen instructions to disable DriveLock. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. 2. 3. 4. 5. 6. Disabling DriveLock 47 Entering a DriveLock password Be sure that the hard drive is inserted into the computer (not into an optional docking device or external MultiBay). At the DriveLock Password prompt, type your DriveLock user or master password (using the same kind of keys you used to set the password), and then press enter. After three incorrect attempts to enter the password, you must shut down the computer and try again. Changing a DriveLock password To change a DriveLock password in Computer Setup, follow these steps. 1. 2. 3. 4. 5. Turn off the computer. Press the power button. At the DriveLock Password prompt, type the current DriveLock user password or master password that you are changing, press enter, and then press or tap f10 to enter Computer Setup. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Select the hard drive you want to manage, and then press enter. 6. Make the selection for the DriveLock password that you want to change, and then follow the on-screen instructions to enter passwords. NOTE: The Change DriveLock Master Password option is visible only if the DriveLock master password was provided at the DriveLock Password prompt in step 3. 7. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Windows Hello (select products only) On products equipped with a fingerprint reader or an infrared camera, Windows Hello allows you to enroll your fingerprint and your facial ID, and set up a PIN. After enrollment, you can use your fingerprint reader, facial ID, or PIN to sign in to Windows. To set up Windows Hello:

1. 2. 3. 4. Select the Start button, select Settings, select Accounts, and then select Sign-in options. If you do not have a password set up, you must add one before you can use other sign-in options. Select Password, and then select Add. Under Facial recognition (Windows Hello) or Fingerprint recognition (Windows Hello), select Set up. Select Get Started, and then follow the on-screen instructions to enroll your fingerprint or facial ID and set up a PIN. IMPORTANT: To prevent fingerprint logon issues, be sure when you register your fingerprint that all sides of your finger are registered by the fingerprint reader. 48 Chapter 7Security NOTE: The PIN is not limited in length. The default setting is for numbers only. To include alphabetic or special characters, select the include letters and symbols check box. Using antivirus software When you use the computer to access email, a network, or the internet, you potentially expose it to computer viruses. Computer viruses can disable the operating system, programs, or utilities, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and, in most cases, repair any damage that they cause. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. Windows Defender is preinstalled on your computer. HP strongly recommends that you continue to use an antivirus program to fully protect your computer. For more information about computer viruses, access the HP Support Assistant. Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be a software program that you install on your computer, network, or both, or it can be a solution made up of both hardware and software. There are two types of firewalls to consider:

Host-based firewallsSoftware that protects only the computer it is installed on. Network-based firewallsInstalled between your DSL or cable modem and your home network to protect all the computers on the network. When a firewall is installed on a system, all data sent to and from the system is monitored and compared with a set of user-defined security criteria. Any data that does not meet those criteria is blocked. Your computer or networking equipment may already have a firewall installed. If not, firewall software solutions are available. NOTE: Under some circumstances a firewall can block access to internet games, interfere with printer or file sharing on a network, or block authorized email attachments. To temporarily resolve the problem, disable the firewall, perform the task that you want to perform, and then reenable the firewall. To permanently resolve the problem, reconfigure the firewall. Installing software updates HP, Windows, and third-party software installed on your computer should be regularly updated to correct security problems and improve software performance. To view or change the settings:

IMPORTANT: Microsoft sends out alerts regarding Windows updates, which may include security updates. To protect the computer from security breaches and computer viruses, install all updates from Microsoft as soon as you receive an alert. You can install these updates automatically. Using antivirus software 49 1. 2. 3. Select the Start button, select Settings, and then select Windows Update. Follow the on-screen instructions. To schedule a time for installing updates, select Advanced Options, and then follow the on-screen instructions. Using HP Client Security (select products only) HP Client Security software is preinstalled on your computer. You can access this software through the HP Client Security icon at the far right of the taskbar or Windows Control Panel. It provides security features that help protect against unauthorized access to the computer, networks, and critical data. For more information, see the HP Client Security software Help. Using HP TechPulse (select products only) HP TechPulse is a cloud-based IT solution that enables businesses to effectively manage and secure their company assets. HP TechPulse helps protect devices against malware and other attacks, monitors device health, and helps reduce time spent solving device and security issues. You can quickly download and install the software, which is highly cost-effective relative to traditional in-house solutions. For more information, go to https://www.hpdaas.com/. Using an optional security cable (select products only) A security cable (purchased separately) is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. To connect a security cable to your computer, follow the device manufacturer's instructions. Using a fingerprint reader (select products only) Integrated fingerprint readers are available on select products. To use the fingerprint reader, you must enroll your fingerprints in HP Client Security's Credential Manager. For more information, see the HP Client Security software Help. After you enroll your fingerprints in Credential Manager, you can use HP Client Security's Password Manager to store and fill in your user names and passwords in supported websites and applications. The fingerprint reader is a small metallic sensor that is located in one of the following areas of your computer:

Near the bottom of the touchpad On the right side of the keyboard On the upper-right side of the display On the left side of the display On the back of the display Depending on your product, the reader may be oriented horizontally or vertically. 50 Chapter 7Security 8 Maintenance Performing regular maintenance keeps your computer in optimal condition. This chapter explains how to use tools like Disk Defragmenter and Disk Cleanup. It also provides instructions for updating programs and drivers, steps to clean the computer, and tips for traveling with (or shipping) the computer. Improving performance You can improve the performance of your computer by performing regular maintenance tasks with tools such as Disk Defragmenter and Disk Cleanup. Using Disk Defragmenter HP recommends using Disk Defragmenter to defragment your hard drive at least once a month. NOTE:

It is not necessary to run Disk Defragmenter on solid-state drives. To run Disk Defragmenter:

1. 2. Connect the computer to AC power. Select the Search icon in the taskbar, type defragment in the search box, and then select Defragment and Optimize Drives. 3. Follow the on-screen instructions. For additional information, access the Disk Defragmenter software Help. Using Disk Cleanup Use Disk Cleanup to search the hard drive for unnecessary files that you can safely delete to free up disk space and help the computer run more efficiently. To run Disk Cleanup:

1. 2. Select the Search icon in the taskbar, type disk in the search box, and then select Disk Cleanup. Follow the on-screen instructions. Using HP 3D DriveGuard (select products only) HP 3D DriveGuard protects a hard drive by parking the drive and halting data requests under some conditions. You drop the computer. You move the computer with the display closed while the computer is running on battery power. A short time after one of these events, HP 3D DriveGuard returns the hard drive to normal operation. NOTE: Only internal hard drives are protected by HP 3D DriveGuard. A hard drive installed in an optional docking device or connected to a USB port is not protected by HP 3D DriveGuard. Maintenance 51 NOTE: Because solid-state drives (SSDs) lack moving parts, HP 3D DriveGuard is unnecessary for these drives. Identifying HP 3D DriveGuard status The hard drive light on the computer changes color to show that the drive in a primary hard drive bay, the secondary hard drive bay (select products only), or both are parked. Updating programs and drivers HP recommends that you update your programs and drivers regularly. Updates can resolve issues and provide new features and options. For example, older graphics components might not work well with the most recent gaming software. Without the latest driver, you do not get the most out of your equipment. Go to http://www.hp.com/support to download the latest versions of HP programs and drivers. In addition, register to receive automatic notifications when updates become available. To update your programs and drivers, follow these steps. 1. Select the Search icon in the taskbar, type support in the search box, and then select HP Support Assistant. or Select the question mark icon (select products only) in the taskbar. 2. 3. Under My notebook, select Updates. Follow the on-screen instructions. Cleaning your computer Cleaning your computer regularly removes dirt and debris so that your device continues to operate at its best. Use the following information to safely clean the external surfaces of your computer. Enabling HP Easy Clean (select products only) HP Easy Clean helps you to avoid accidental input while you clean the computer surfaces. This software disables devices such as the keyboard, touch screen, and touchpad for a preset amount of time so that you can clean all computer surfaces. 1. Start HP Easy Clean in one of the following ways:

Select the Start button, and then select HP Easy Clean. or Select the HP Easy Clean icon in the taskbar. or Select the Start button, and then select the HP Easy Clean tile. 2. Now that your device is disabled for a short period, see Removing dirt and debris from your computer on page 53 for the recommended steps to clean the high-touch, external surfaces on your computer. After you remove the dirt and debris, you can also clean the surfaces with a disinfectant. See Cleaning your 52 Chapter 8Maintenance computer with a disinfectant on page 53 for guidelines to help prevent the spread of harmful bacteria and viruses. Removing dirt and debris from your computer Here are the recommended steps to clean dirt and debris from your computer. For computers with wood veneer, see Caring for wood veneer (select products only) on page 54. 1. Wear disposable gloves made of latex (or nitrile gloves, if you are latex-sensitive) when cleaning the surfaces. 2. Turn off your device and unplug the power cord and other connected external devices. Remove any installed batteries from items such as wireless keyboards. CAUTION: To prevent electric shock or damage to components, never clean a product while it is turned on or plugged in. 3. Moisten a microfiber cloth with water. The cloth should be moist, but not dripping wet. IMPORTANT: To avoid damaging the surface, avoid abrasive cloths, towels, and paper towels. 4. Wipe the exterior of the product gently with the moistened cloth. IMPORTANT: Keep liquids away from the product. Avoid getting moisture in any openings. If liquid makes its way inside your HP product, it can cause damage to the product. Do not spray liquids directly on the product. Do not use aerosol sprays, solvents, abrasives, or cleaners containing hydrogen peroxide or bleach that might damage the finish. 5. 6. 7. Start with the display (if applicable). Wipe carefully in one direction, and move from the top of the display to the bottom. Finish with any flexible cables, like power cord, keyboard cable, and USB cables. Be sure that surfaces have completely air-dried before turning the device on after cleaning. Discard the gloves after each cleaning. Clean your hands immediately after you remove the gloves. See Cleaning your computer with a disinfectant on page 53 for recommended steps to clean the high-touch, external surfaces on your computer to help prevent the spread of harmful bacteria and viruses. Cleaning your computer with a disinfectant The World Health Organization (WHO) recommends cleaning surfaces, followed by disinfection, as a best practice for preventing the spread of viral respiratory illnesses and harmful bacteria. After cleaning the external surfaces of your computer using the steps in Removing dirt and debris from your computer on page 53, Caring for wood veneer (select products only) on page 54, or both, you might also choose to clean the surfaces with a disinfectant. A disinfectant that is within HPs cleaning guidelines is an alcohol solution consisting of 70% isopropyl alcohol and 30% water. This solution is also known as rubbing alcohol and is sold in most stores. Follow these steps when disinfecting high-touch, external surfaces on your computer:

1. Wear disposable gloves made of latex (or nitrile gloves, if you are latex-sensitive) when cleaning the surfaces. Removing dirt and debris from your computer 53 2. Turn off your device and unplug the power cord and other connected external devices. Remove any installed batteries from items such as wireless keyboards. CAUTION: To prevent electric shock or damage to components, never clean a product while it is turned on or plugged in. 3. Moisten a microfiber cloth with a mixture of 70% isopropyl alcohol and 30% water. The cloth should be moist, but not dripping wet. CAUTION: Do not use any of the following chemicals or any solutions that contain them, including spray-based surface cleaners: bleach, peroxides (including hydrogen peroxide), acetone, ammonia, ethyl alcohol, methylene chloride, or any petroleum-based materials, such as gasoline, paint thinner, benzene, or toluene. IMPORTANT: To avoid damaging the surface, avoid abrasive cloths, towels, and paper towels. 4. Wipe the exterior of the product gently with the moistened cloth. IMPORTANT: Keep liquids away from the product. Avoid getting moisture in any openings. If liquid makes its way inside your HP product, it can cause damage to the product. Do not spray liquids directly on the product. Do not use aerosol sprays, solvents, abrasives, or cleaners containing hydrogen peroxide or bleach that might damage the finish. 5. 6. 7. Start with the display (if applicable). Wipe carefully in one direction, and move from the top of the display to the bottom. Finish with any flexible cables, like power cord, keyboard cable, and USB cables. Be sure that surfaces have completely air-dried before turning the device on after cleaning. Discard the gloves after each cleaning. Clean your hands immediately after you remove the gloves. Caring for wood veneer (select products only) Your product might feature high-quality wood veneer. As with all natural wood products, proper care is important for best results over the life of the product. Because of the nature of natural wood, you might see unique variations in the grain pattern or subtle variations in color, which are normal. Clean the wood with a dry, static-free microfiber cloth or chamois. Avoid cleaning products containing substances such as ammonia, methylene chloride, acetone, turpentine, or other petroleum-based solvents. Do not expose the wood to sun or moisture for long periods of time. If the wood becomes wet, dry it by dabbing with an absorbent, lint-free cloth. Avoid contact with any substance that might dye or discolor the wood. Avoid contact with sharp objects or rough surfaces that might scratch the wood. See Removing dirt and debris from your computer on page 53 for the recommended steps to clean the high-touch, external surfaces on your computer. After you remove the dirt and debris, you can also clean the surfaces with a disinfectant. See Cleaning your computer with a disinfectant on page 53 for sanitizing guidelines to help prevent the spread of harmful bacteria and viruses. Traveling with or shipping your computer If you must travel with or ship your computer, follow these tips to keep your equipment safe. 54 Chapter 8Maintenance Prepare the computer for traveling or shipping:

Back up your information to an external drive. Remove all discs and all external media cards, such as memory cards. Turn off and then disconnect all external devices. Shut down the computer. Take a backup of your information. Keep the backup separate from the computer. When traveling by air, carry the computer as hand luggage; do not check it in with the rest of your luggage. IMPORTANT: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you can use your computer. In-flight computer use is at the discretion of the airline. If you are shipping the computer or a drive, use suitable protective packaging and label the package FRAGILE. The use of wireless devices might be restricted in some environments. Such restrictions might apply aboard aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that applies to the use of a wireless device in your computer, ask for authorization to use your computer before you turn it on. If you are traveling internationally, follow these suggestions:

Check the computer-related customs regulations for each country or region on your itinerary. Check the power cord and adapter requirements for each location in which you plan to use the computer. Voltage, frequency, and plug configurations vary. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to run the computer with a voltage converter kit that is sold for appliances. Traveling with or shipping your computer 55 9 Backing up, restoring, and recovering You can use Windows tools or HP software to back up your information, create a restore point, reset your computer, create recovery media, or restore your computer to its factory state. Performing these standard procedures can return your computer to a working state faster. IMPORTANT:

70% charged before you start the recovery process. If you will be performing recovery procedures on a tablet, the tablet battery must be at least IMPORTANT:

beginning any recovery process. For a tablet with a detachable keyboard, connect the tablet to the keyboard base before Backing up information and creating recovery media These methods of creating recovery media and backups are available on select products only. Using Windows tools for backing up HP recommends that you back up your information immediately after initial setup. You can do this task either using Windows Backup locally with an external USB drive or using online tools. IMPORTANT: Windows is the only option that allows you to back up your personal information. Schedule regular backups to avoid information loss. NOTE:

If computer storage is 32 GB or less, Microsoft System Restore is disabled by default. Using the HP Cloud Recovery Download Tool to create recovery media (select products only) You can use the HP Cloud Recovery Download Tool to create HP Recovery media on a bootable USB flash drive. For details:

Go to http://www.hp.com, search for HP Cloud Recovery, and then select the result that matches the type of computer that you have. If you cannot create recovery media yourself, contact support to obtain recovery discs. Go to NOTE:

http://www.hp.com/support, select your country or region, and then follow the on-screen instructions. IMPORTANT: HP recommends that you follow the Restoring and recovery methods on page 57 to restore your computer before you obtain and use the HP recovery discs. Using a recent backup can return your machine to a working state sooner than using the HP recovery discs. After the system is restored, reinstalling all the operating system software released since your initial purchase can be a lengthy process. Restoring and recovering your system You have several tools available to recover your system both within and outside of Windows if the desktop cannot load. 56 Chapter 9Backing up, restoring, and recovering HP recommends that you attempt to restore your system using the Restoring and recovery methods on page 57. Creating a system restore System Restore is available in Windows. The System Restore software can automatically or manually create restore points, or snapshots, of the system files and settings on the computer at a particular point. When you use System Restore, it returns your computer to its state at the time you made the restore point. Your personal files and documents should not be affected. Restoring and recovery methods After you run the first method, test to see whether the issue still exists before you proceed to the next method, which might now be unnecessary. 1. 2. Run a Microsoft System Restore. Run Reset this PC. NOTE: The options Remove everything and then Fully clean the drive can take several hours to complete and leave no information on your computer. It is the safest way to reset your computer before you recycle it. 3. Recover using HP Recovery media. For more information, see Recovering using HP Recovery media on page 57. For more information about the first two methods, see the Get Help app:

Select the Start button, select All apps, select the Get Help app, and then enter the task you want to perform. NOTE: You must be connected to the internet to access the Get Help app. Recovering using HP Recovery media You can use HP Recovery media to recover the original operating system and software programs that were installed at the factory. On select products, it can be created on a bootable USB flash drive using the HP Cloud Recovery Download Tool. For details, see Using the HP Cloud Recovery Download Tool to create recovery media (select products only) on page 56. If you cannot create recovery media yourself, contact support to obtain recovery discs. Go to NOTE:

http://www.hp.com/support, select your country or region, and then follow the on-screen instructions. To recover your system:

Insert the HP Recovery media, and then restart the computer. NOTE: HP recommends that you follow the Restoring and recovery methods on page 57 to restore your computer before you obtain and use the HP recovery discs. Using a recent backup can return your machine to a working state sooner than using the HP recovery discs. After the system is restored, reinstalling all the operating system software released since your initial purchase can be a lengthy process. Creating a system restore 57 Changing the computer boot order If your computer does not restart using the HP Recovery media, you can change the computer boot order, the order of devices listed in BIOS for startup information. You can select an optical drive or a USB flash drive, depending on the location of your HP Recovery media. IMPORTANT:

beginning these steps. For a tablet with a detachable keyboard, connect the tablet to the keyboard base before To change the boot order:

1. 2. Insert the HP Recovery media. Access the system Startup menu. For computers or tablets with keyboards attached, turn on or restart the computer or tablet, quickly press esc, and then press f9 for boot options. For tablets without keyboards, turn on or restart the tablet, quickly press and hold the volume up button, and then select f9. or Turn on or restart the tablet, quickly press and hold the volume down button, and then select f9. 3. Select the optical drive or USB flash drive from which you want to boot, and then follow the on-screen instructions. Using HP Sure Recover (select products only) Select computer models are configured with HP Sure Recover, a PC operating system (OS) recovery solution built into the hardware and software. HP Sure Recover can fully restore the HP OS image without installed recovery software. Using HP Sure Recover, an administrator or user can restore the system and install:

Latest version of the operating system Platform-specific device drivers Software applications, in the case of a custom image To access the latest documentation for HP Sure Recover, go to http://www.hp.com/support. Follow the on-screen instructions to find your product and locate your documentation. 58 Chapter 9Backing up, restoring, and recovering 10 Computer Setup (BIOS), TPM, and HP Sure Start HP provides several tools to help set up and protect your computer. Using Computer Setup Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as hard drives, display, keyboard, mouse, and printer). Computer Setup includes settings for types of devices installed, the startup sequence of the computer, and amount of system and extended memory. NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the computer from operating properly. To start Computer Setup, turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Navigating and selecting in Computer Setup You can navigate and select in Computer Setup using one or more methods. To select a menu or a menu item, use the tab key and the keyboard arrow keys and then press enter, or use a pointing device to select the item. To scroll up and down, select the up arrow or the down arrow in the upper-right corner of the screen, or use the up arrow key or the down arrow key on the keyboard. To close open dialog boxes and return to the main Computer Setup screen, press esc, and then follow the on-screen instructions. To exit Computer Setup, choose one of the following methods:

To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. To save your changes and exit Computer Setup menus, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. Restoring factory settings in Computer Setup To return all settings in Computer Setup to the values that were set at the factory, follow these steps. NOTE: Restoring defaults will not change the hard drive mode. Computer Setup (BIOS), TPM, and HP Sure Start 59 1. 2. Start Computer Setup. See Using Computer Setup on page 59. Select Main, select Apply Factory Defaults and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. NOTE: On select products, the selections might display Restore Defaults instead of Apply Factory Defaults and Exit. Your changes go into effect when the computer restarts. NOTE: Your password settings and security settings are not changed when you restore the factory settings. Updating the BIOS Updated versions of the BIOS might be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version To decide whether you need to update Computer Setup (BIOS), first determine the BIOS version on your computer. If you are already in Windows, you can access BIOS version information (also known as ROM date and System BIOS) by pressing fn+esc (select products only). Or you can use Computer Setup. 1. 2. 3. Start Computer Setup. See Using Computer Setup on page 59. Select Main, and then select System Information. To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. To check for later BIOS versions, see Preparing for a BIOS update on page 60. Preparing for a BIOS update Be sure to follow all prerequisites before downloading and installing a BIOS update. IMPORTANT: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power on the computer by unplugging the power cord from the AC outlet. Do not shut down the computer or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. 60 Chapter 10Computer Setup (BIOS), TPM, and HP Sure Start Downloading a BIOS update After you review the prerequisites, you can check for and download BIOS updates. 1. Select the Search icon in the taskbar, type support in the search box, and then select the HP Support Assistant app. or Select the question mark icon (select products only) in the taskbar. Select Updates, and then select Check for updates and messages. Follow the on-screen instructions. At the download area, follow these steps:

2. 3. 4. a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. Make a note of the date, name, or other identifier. You might need this information to locate the update later, after it has been downloaded to your hard drive. b. Follow the on-screen instructions to download your selection to the hard drive. Make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update. If you connect your computer to a network, consult the network administrator before installing NOTE:

any software updates, especially system BIOS updates. Installing a BIOS update BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the download is complete. If no instructions are displayed, follow these steps. 1. 2. 3. 4. Select the Search icon in the taskbar, type file in the search box, and then select File Explorer. Select your hard drive designation. The hard drive designation is typically Local Disk (C:). Using the hard drive path you recorded earlier, open the folder that contains the update. Double-click the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. 5. Complete the installation by following the on-screen instructions. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. Changing the boot order using the f9 prompt To dynamically choose a boot device for the current startup sequence, follow these steps. 1. Access the Boot Device Options menu:

Turn on or restart the computer, and when the HP logo appears, press f9 to enter the Boot Device Options menu. 2. Select a boot device, press enter, and then follow the on-screen instructions. Downloading a BIOS update 61 TPM BIOS settings (select products only) TPM provides additional security for your computer. You can modify the TPM settings in Computer Setup

(BIOS). IMPORTANT: Before enabling Trusted Platform Module (TPM) functionality on this system, you must ensure that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or licenses must be obtained if applicable. For any compliance issues arising from your operation or usage of TPM that violates the previously mentioned requirement, you shall bear all the liabilities wholly and solely. HP will not be responsible for any related liabilities. NOTE:

If you change the TPM setting to Hidden, TPM is not visible in the operating system. To access TPM settings in Computer Setup:

1. 2. Start Computer Setup. See Using Computer Setup on page 59. Select Security, select TPM Embedded Security, and then follow the on-screen instructions. Using HP Sure Start (select products only) Select computer models are configured with HP Sure Start, a technology that monitors the computer's BIOS for attacks or corruption. If the BIOS becomes corrupted or is attacked, HP Sure Start automatically restores the BIOS to its previously safe state, without user intervention. HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default configuration. Advanced users can customize the default configuration. To access the latest documentation on HP Sure Start, go to http://www.hp.com/support. Select Find your product, and then follow the on-screen instructions. 62 Chapter 10Computer Setup (BIOS), TPM, and HP Sure Start 11 Using HP PC Hardware Diagnostics You can use the HP PC Hardware Diagnostics utility to determine whether your computer hardware is running properly. The three versions are HP PC Hardware Diagnostics Windows, HP PC Hardware Diagnostics UEFI

(Unified Extensible Firmware Interface), and (for select products only) Remote HP PC Hardware Diagnostics UEFI, a firmware feature. Using HP PC Hardware Diagnostics Windows (select products only) HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs within the Windows operating system to diagnose hardware failures. If HP PC Hardware Diagnostics Windows is not installed on your computer, first you must download and install it. To download HP PC Hardware Diagnostics Windows, see Downloading HP PC Hardware Diagnostics Windows on page 64. Using an HP PC Hardware Diagnostics Windows hardware failure ID code When HP PC Hardware Diagnostics Windows detects a failure that requires hardware replacement, a 24-digit failure ID code is generated for select component tests. For interactive tests, such as keyboard, mouse, or audio and video palette, you must perform troubleshooting steps before you can receive a failure ID. You have several options after you receive a failure ID:

Select Next to open the Event Automation Service (EAS) page, where you can log the case. or Scan the QR code with your mobile device, which takes you to the EAS page, where you can log the case. or Select the box next to the 24-digit failure ID to copy your failure code and send it to support. Accessing HP PC Hardware Diagnostics Windows After HP PC Hardware Diagnostics Windows is installed, you can access it from HP Support Assistant or the Start menu. Accessing HP PC Hardware Diagnostics Windows from HP Help and Support (select products only) After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from HP Help and Support. 1. 2. Select the Start button, and then select HP Help and Support. Select HP PC Hardware Diagnostics Windows. 3. When the tool opens, select the type of diagnostic test that you want to run, and then follow the on-screen instructions. Using HP PC Hardware Diagnostics 63 NOTE: To stop a diagnostic test, select Cancel. Accessing HP PC Hardware Diagnostics Windows from HP Support Assistant After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from HP Support Assistant. 1. Select the Search icon in the taskbar, type support in the search box, and then select HP Support Assistant. or Select the question mark icon (select products only) in the taskbar. 2. 3. Select Fixes & Diagnostics. Select Run Hardware diagnostics, and then select Launch. 4. When the tool opens, select the type of diagnostic test that you want to run, and then follow the on-screen instructions. NOTE: To stop a diagnostic test, select Cancel. Accessing HP PC Hardware Diagnostics Windows from the Start menu (select products only) After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from the Start menu. 1. 2. Select the Start button, and then select All apps. Select HP PC Hardware Diagnostics Windows. 3. When the tool opens, select the type of diagnostic test that you want to run, and then follow the on-screen instructions. NOTE: To stop a diagnostic test, select Cancel. Downloading HP PC Hardware Diagnostics Windows The HP PC Hardware Diagnostics Windows downloading instructions are provided in English only. You must use a Windows computer to download this tool because only .exe files are provided. Downloading the latest HP PC Hardware Diagnostics Windows version from HP To download HP PC Hardware Diagnostics Windows from HP, follow these steps. 1. 2. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed. Select Download HP Diagnostics Windows, and then select the specific Windows diagnostics version to download to your computer or a USB flash drive. The tool downloads to the selected location. Downloading HP Hardware Diagnostics Windows by product name or number (select products only) You can download HP PC Hardware Diagnostics Windows by product name or number. For some products, you might have to download the software to a USB flash drive by using the NOTE:

product name or number. 64 Chapter 11Using HP PC Hardware Diagnostics 1. 2. 3. Go to http://www.hp.com/support. Select Software and Drivers, select your type of product, and then enter the product name or number in the search box that is displayed. In the Diagnostics section, select Download, and then follow the on-screen instructions to select the specific Windows diagnostics version to be downloaded to your computer or USB flash drive. The tool downloads to the selected location. Downloading the HP PC Hardware Diagnostics Windows from the Microsoft Store You can download the HP PC Hardware Diagnostics Windows from the Microsoft Store. 1. Select the Microsoft Store app on your desktop. or Select the Search icon in the taskbar, and then type Microsoft Store in the search box. Enter HP PC Hardware Diagnostics Windows in the Microsoft Store search box. Follow the on-screen directions. 2. 3. The tool downloads to the selected location. Installing HP PC Hardware Diagnostics Windows To install HP PC Hardware Diagnostics Windows, navigate to the folder on your computer or the USB flash drive where the .exe file downloaded, double-click the .exe file, and then follow the on-screen instructions. Using HP PC Hardware Diagnostics UEFI HP PC Hardware Diagnostics UEFI (Unified Extensible Firmware Interface) allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components. For some products, you must use a Windows computer and a USB flash drive to download and create NOTE:

the HP UEFI support environment because only .exe files are provided. For more information, see Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive on page 66. If your PC does not start in Windows, you can use HP PC Hardware Diagnostics UEFI to diagnose hardware issues. Using an HP PC Hardware Diagnostics UEFI hardware failure ID code When HP PC Hardware Diagnostics UEFI detects a failure that requires hardware replacement, a 24-digit failure ID code is generated. For assistance in solving the problem:

Select Contact HP, accept the HP privacy disclaimer, and then use a mobile device to scan the failure ID code that appears on the next screen. The HP Customer Support - Service Center page appears with your failure ID and product number automatically filled in. Follow the on-screen instructions. or Downloading the HP PC Hardware Diagnostics Windows from the Microsoft Store 65 Contact support, and provide the failure ID code. NOTE: To start diagnostics on a convertible computer, your computer must be in notebook mode, and you must use the attached keyboard. NOTE:

If you need to stop a diagnostic test, press esc. Starting HP PC Hardware Diagnostics UEFI To start HP PC Hardware Diagnostics UEFI, follow this procedure. 1. 2. Turn on or restart the computer, and quickly press esc. Press f2. The BIOS searches three places for the diagnostic tools, in the following order:

a. Connected USB flash drive NOTE: To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see Downloading the latest HP PC Hardware Diagnostics UEFI version on page 66. b. c. Hard drive BIOS 3. When the diagnostic tool opens, select a language, select the type of diagnostic test you want to run, and then follow the on-screen instructions. Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive can be useful in some situations. HP PC Hardware Diagnostics UEFI is not included in the preinstallation image. HP PC Hardware Diagnostics UEFI is not included in the HP Tool partition. The hard drive is damaged. NOTE: The HP PC Hardware Diagnostics UEFI downloading instructions are provided in English only, and you must use a Windows computer to download and create the HP UEFI support environment because only .exe files are provided. Downloading the latest HP PC Hardware Diagnostics UEFI version To download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive, follow this procedure. 1. 2. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed. Select Download HP Diagnostics UEFI, and then select Run. Downloading HP PC Hardware Diagnostics UEFI by product name or number (select products only) You can download HP PC Hardware Diagnostics UEFI by product name or number (select products only) to a USB flash drive. For some products, you might have to download the software to a USB flash drive by using the NOTE:

product name or number. 66 Chapter 11Using HP PC Hardware Diagnostics 1. 2. 3. Go to http://www.hp.com/support. Enter the product name or number, select your computer, and then select your operating system. In the Diagnostics section, follow the on-screen instructions to select and download the specific UEFI Diagnostics version for your computer. Using Remote HP PC Hardware Diagnostics UEFI settings (select products only) Remote HP PC Hardware Diagnostics UEFI is a firmware (BIOS) feature that downloads HP PC Hardware Diagnostics UEFI to your computer. It can then execute the diagnostics on your computer, and it might upload results to a preconfigured server. For more information about Remote HP PC Hardware Diagnostics UEFI, go to http://www.hp.com/go/techcenter/pcdiags, and then select Find out more. Downloading Remote HP PC Hardware Diagnostics UEFI HP Remote PC Hardware Diagnostics UEFI is also available as a SoftPaq that you can download to a server. Downloading the latest Remote HP PC Hardware Diagnostics UEFI version You can download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive. 1. 2. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed. Select Download Remote Diagnostics, and then select Run. Downloading Remote HP PC Hardware Diagnostics UEFI by product name or number You can download HP Remote PC Hardware Diagnostics UEFI by product name or number. For some products, you might have to download the software by using the product name or NOTE:

number. 1. 2. 3. Go to http://www.hp.com/support. Select Software and Drivers, select your type of product, enter the product name or number in the search box that is displayed, select your computer, and then select your operating system. In the Diagnostics section, follow the on-screen instructions to select and download the Remote UEFI version for the product. Customizing Remote HP PC Hardware Diagnostics UEFI settings Using the Remote HP PC Hardware Diagnostics setting in Computer Setup (BIOS), you can perform several customizations. Set a schedule for running diagnostics unattended. You can also start diagnostics immediately in interactive mode by selecting Execute Remote HP PC Hardware Diagnostics. Set the location for downloading the diagnostic tools. This feature provides access to the tools from the HP website or from a server that has been preconfigured for use. Your computer does not require the traditional local storage (such as a hard drive or USB flash drive) to run remote diagnostics. Using Remote HP PC Hardware Diagnostics UEFI settings (select products only) 67 Set a location for storing the test results. You can also set the user name and password that you use for uploads. Display status information about the diagnostics run previously. To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:

1. 2. Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Select Advanced, and then select Settings. 3. Make your customization selections. 4. Select Main, and then Save Changes and Exit to save your settings. Your changes take effect when the computer restarts. 68 Chapter 11Using HP PC Hardware Diagnostics 12 Specifications When you travel with or store your computer, the input power ratings and operating specifications provide helpful information. Input power The power information in this section might be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100 V240 V, 50 Hz60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer. The computer can operate on DC power within one or more of the following specifications. The voltage and current for your computer is located on the regulatory label. Specifications 69 Table 12-1 DC power specifications Input Power Rating Operating voltage and current 5 V dc @ 2 A / 12 V dc @ 3 A /15 V dc @ 3 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 3.75 A /15 V dc @ 3 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 3.75 A / 12 V dc @ 3.75 A /

15 V dc @ 3 A / 20 V dc @ 2.25 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 5 A / 15 V dc @ 4.33 A / 20 V dc @ 3.25 A 65 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc

@ 4.33 A / 20 V dc @ 3.25 A 65 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc

@ 5 A / 20 V dc @ 4.5 A 90 W USB-C 19.5 V dc @ 2.31 A 45 W 19.5 V dc @ 3.33 A 65 W 19.5 V dc @ 4.62 A 90 W 19.5 V dc @ 6.15 A 120 W 19.5 V dc @ 6.9 A 135 W 19.5 V dc @ 7.70 A 150 W 19.5 V dc @ 10.3 A 200 W 19.5 V dc @ 11.8 A 230 W 19.5 V dc @ 16.92 A 330 W NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. Operating environment Use the operating specifications for helpful information when you travel with or store your computer. Table 12-2 Operating environment specifications Factor Temperature Metric U.S. Operating (writing to optical disc) 5C to 35C Nonoperating 20C to 60C Relative humidity (noncondensing) Operating Nonoperating 10% to 90%

5% to 95%

Maximum altitude (unpressurized) 41F to 95F 4F to 140F 10% to 90%

5% to 95%

70 Chapter 12Specifications Table 12-2 Operating environment specifications (continued) Factor Operating Nonoperating Metric U.S. 15 m to 3,048 m 15 m to 12,192 m 50 ft to 10,000 ft 50 ft to 40,000 ft Operating environment 71 13 Electrostatic discharge Electrostatic discharge is the release of static electricity when two objects come into contactfor example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components. IMPORTANT: To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:

If removal or installation instructions direct you to unplug the computer, first be sure that it is properly grounded. Keep components in their electrostatic-safe containers until you are ready to install them. Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. Use nonmagnetic tools. Before handling components, discharge static electricity by touching an unpainted metal surface. If you remove a component, place it in an electrostatic-safe container. 72 Chapter 13Electrostatic discharge 14 Accessibility HP's goal is to design, produce, and market products, services, and information that everyone everywhere can use, either on a stand-alone basis or with appropriate third-party assistive technology (AT) devices or applications. HP and accessibility Because HP works to weave diversity, inclusion, and work/life into the fabric of the company, it is reflected in everything HP does. HP strives to create an inclusive environment focused on connecting people to the power of technology throughout the world. Finding the technology tools you need Technology can unleash your human potential. Assistive technology removes barriers and helps you create independence at home, at work, and in the community. Assistive technology helps increase, maintain, and improve the functional capabilities of electronic and information technology. For more information, see Finding the best assistive technology on page 74. The HP commitment HP is committed to providing products and services that are accessible for people with disabilities. This commitment supports the company's diversity objectives and helps ensure that the benefits of technology are available to all. The HP accessibility goal is to design, produce, and market products and services that can be effectively used by everyone, including people with disabilities, either on a stand-alone basis or with appropriate assistive devices. To achieve that goal, this Accessibility Policy establishes seven key objectives to guide HP actions. All HP managers and employees are expected to support these objectives and their implementation in accordance with their roles and responsibilities:

Raise the level of awareness of accessibility issues within HP, and provide employees with the training they need to design, produce, market, and deliver accessible products and services. Develop accessibility guidelines for products and services, and hold product development groups accountable for implementing these guidelines where competitively, technically, and economically feasible. Involve people with disabilities in the development of accessibility guidelines and in the design and testing of products and services. Document accessibility features, and make information about HP products and services publicly available in an accessible form. Establish relationships with leading assistive technology and solution providers. Support internal and external research and development that improves assistive technology relevant to HP products and services. Support and contribute to industry standards and guidelines for accessibility. Accessibility 73 International Association of Accessibility Professionals (IAAP) IAAP is a not-for-profit association focused on advancing the accessibility profession through networking, education, and certification. The objective is to help accessibility professionals develop and advance their careers and to better enable organizations to integrate accessibility into their products and infrastructure. As a founding member, HP joined to participate with other organizations to advance the field of accessibility. This commitment supports HPs accessibility goal of designing, producing, and marketing products and services that people with disabilities can effectively use. IAAP will make the profession strong by globally connecting individuals, students, and organizations to learn from one another. If you are interested in learning more, go to http://www.accessibilityassociation.org to join the online community, sign up for newsletters, and learn about membership options. Finding the best assistive technology Everyone, including people with disabilities or age-related limitations, should be able to communicate, express themselves, and connect with the world using technology. HP is committed to increasing accessibility awareness within HP and with our customers and partners. Whether its large fonts that are easy on the eyes, voice recognition that lets you give your hands a rest, or any other assistive technology to help with your specific situationa variety of assistive technologies make HP products easier to use. How do you choose?

Assessing your needs Technology can unleash your potential. Assistive technology removes barriers and helps you create independence at home, at work, and in the community. Assistive technology (AT) helps increase, maintain, and improve the functional capabilities of electronic and information technology. You can choose from many AT products. Your AT assessment should allow you to evaluate several products, answer your questions, and facilitate your selection of the best solution for your situation. You will find that professionals qualified to do AT assessments come from many fields, including those licensed or certified in physical therapy, occupational therapy, speech/language pathology, and other areas of expertise. Others, while not certified or licensed, can also provide evaluation information. You will want to ask about the individual's experience, expertise, and fees to determine if they are appropriate for your needs. Accessibility for HP products These links provide information about accessibility features and assistive technology, if applicable and available in your country or region, that are included in various HP products. These resources will help you select the specific assistive technology features and products most appropriate for your situation. HP Aging & Accessibility: Go to http://www.hp.com, type Accessibility in the search box. Select Office of Aging and Accessibility. HP computers: For Windows products, go to http://www.hp.com/support, type Windows Accessibility Options in the Search our knowledge search box. Select the appropriate operating system in the results. HP Shopping, peripherals for HP products: Go to http://store.hp.com, select Shop, and then select Monitors or Accessories. If you need additional support with the accessibility features on your HP product, see Contacting support on page 77. Additional links to external partners and suppliers that may provide additional assistance:

74 Chapter 14Accessibility Microsoft Accessibility information (Windows and Microsoft Office) Google Products accessibility information (Android, Chrome, Google Apps) Standards and legislation Countries worldwide are enacting regulations to improve access to products and services for persons with disabilities. These regulations are historically applicable to telecommunications products and services, PCs and printers with certain communications and video playback features, their associated user documentation, and their customer support. Standards The US Access Board created Section 508 of the Federal Acquisition Regulation (FAR) standards to address access to information and communication technology (ICT) for people with physical, sensory, or cognitive disabilities. The standards contain technical criteria specific to various types of technologies, as well as performance-

based requirements which focus on functional capabilities of covered products. Specific criteria cover software applications and operating systems, web-based information and applications, computers, telecommunications products, video and multimedia, and self-contained closed products. Mandate 376 EN 301 549 The European Union created the EN 301 549 standard within Mandate 376 as an online toolkit for public procurement of ICT products. The standard specifies the accessibility requirements applicable to ICT products and services, with a description of the test procedures and evaluation methodology for each requirement. Web Content Accessibility Guidelines (WCAG) Web Content Accessibility Guidelines (WCAG) from the W3C's Web Accessibility Initiative (WAI) helps web designers and developers create sites that better meet the needs of people with disabilities or age-related limitations. WCAG advances accessibility across the full range of web content (text, images, audio, and video) and web applications. WCAG can be precisely tested, is easy to understand and use, and allows web developers flexibility for innovation. WCAG 2.0 has also been approved as ISO/IEC 40500:2012. WCAG specifically addresses barriers to accessing the web experienced by people with visual, auditory, physical, cognitive, and neurological disabilities, and by older web users with accessibility needs. WCAG 2.0 provides characteristics of accessible content:

Perceivable (for instance, by addressing text alternatives for images, captions for audio, adaptability of presentation, and color contrast) Operable (by addressing keyboard access, color contrast, timing of input, seizure avoidance, and navigability) Understandable (by addressing readability, predictability, and input assistance) Robust (for instance, by addressing compatibility with assistive technologies) Legislation and regulations Accessibility of IT and information has become an area of increasing legislative importance. These links provide information about key legislation, regulations, and standards. Standards and legislation 75 United States Canada Europe Australia Useful accessibility resources and links These organizations, institutions, and resources might be good sources of information about disabilities and age-related limitations. NOTE: This is not an exhaustive list. These organizations are provided for informational purposes only. HP assumes no responsibility for information or contacts you encounter on the internet. Listing on this page does not imply endorsement by HP. Organizations These organizations are a few of the many that provide information about disabilities and age-related limitations. American Association of People with Disabilities (AAPD) The Association of Assistive Technology Act Programs (ATAP) Hearing Loss Association of America (HLAA) Information Technology Technical Assistance and Training Center (ITTATC) Lighthouse International National Association of the Deaf National Federation of the Blind Rehabilitation Engineering & Assistive Technology Society of North America (RESNA) Telecommunications for the Deaf and Hard of Hearing, Inc. (TDI) W3C Web Accessibility Initiative (WAI) Educational institutions Many educational institutions, including these examples, provide information about disabilities and age-

related limitations. California State University, Northridge, Center on Disabilities (CSUN) University of Wisconsin - Madison, Trace Center University of Minnesota computer accommodations program Other disability resources Many resources, including these examples, provide information about disabilities and age-related limitations. ADA (Americans with Disabilities Act) Technical Assistance Program 76 Chapter 14Accessibility ILO Global Business and Disability network EnableMart European Disability Forum Job Accommodation Network Microsoft Enable HP links These HP-specific links provide information that relates to disabilities and age-related limitations. HP comfort and safety guide HP public sector sales Contacting support HP offers technical support and assistance with accessibility options for customers with disabilities. NOTE: Support is in English only. Customers who are deaf or hard of hearing who have questions about technical support or accessibility of HP products:

Use TRS/VRS/WebCapTel to call (877) 656-7058 Monday through Friday, 6 a.m. to 9 p.m. Mountain Time. Customers with other disabilities or age-related limitations who have questions about technical support or accessibility of HP products:

Call (888) 259-5707 Monday through Friday, 6 a.m. to 9 p.m. Mountain Time. HP links 77 Index A accessibility 73-75, 77 accessibility needs assessment 74 action keys 13 identifying 13 keyboard backlight 14 mute 14 privacy screen 14 screen brightness 14 speaker volume 14 switch screen image 14 using 13 wireless 15 administrator password 41 airplane mode key 19 ambient light sensor 7, 8 identifying 7, 8 antivirus software 49 assistive technology (AT) finding 74 purpose 73 AT (assistive technology) finding 74 purpose 73 audio 28 adjusting volume 14 headphones 28 headsets 29 sound settings 29 speakers 28 audio-out (headphone)/audio-in

(microphone) combo jack, identifying 5 Automatic Drivelock selecting 44 Automatic DriveLock disabling 45 enabling 44 Automatic DriveLock password entering 45 B backup, creating 56 backups 56 battery conserving power 37 discharging 37 78 Index factory-sealed 38 finding information 37 low battery levels 37 resolving low battery level 37, 38 battery charge 36 battery information, finding 37 battery light 5 battery power 36 BIOS determining version 60 downloading an update 60, 61 updating 60 Bluetooth device 19, 21 Bluetooth label 16 boot order changing using the f9 prompt 61 boot order, changing 58 buttons camera 13 left Touchpad 9 power 12, 13 right Touchpad 9 C camera 6-8 identifying 6-8 using 28 camera disable button, identifying 13 camera privacy cover using 28 camera privacy light, identifying 10 caps lock light, identifying 10 caring for your computer 52 cleaning your computer 52 caring for wood veneer 54 disinfecting 53 HP Easy Clean 52 removing dirt and debris 53 components bottom 15 display 5, 6 keyboard area 8 left side 4 right side 3 Computer Setup BIOS administrator password 42-44 navigating and selecting 59 restoring factory settings 59 starting 59 connecting to a WLAN 20 connector, power 5 corporate WLAN connection 20 critical battery level 37 customer support, accessibility 77 D data transfer 32 Disk Cleanup software 51 Disk Defragmenter software 51 display components 5, 6 DriveLock description 45 disabling 47 enabling 46 DriveLock master password changing 48 DriveLock password changing 48 entering 48 setting 46 DriveLock Security Options 44 E electrostatic discharge 72 esc key, identifying 13 external power, using 38 F factory-sealed battery 38 fingerprint reader 50 fingerprint reader, identifying 12 fingerprints, registering 48 firewall software 49 fn key, identifying 13 fn lock light, identifying 10 four-finger swipe touchpad gesture 26 four-finger tap touchpad gesture 26 G gesture 26 H hardware, locating 3 headphones, connecting 28 headsets, connecting 29 Hibernation exiting 35 initiated during critical battery level 37 initiating 35 hot keys break 15 insert 15 microphone mute 14 pause 15 programming query 15 scroll lock 15 using 15 HP 3D DriveGuard 51 HP Assistive Policy 73 HP Client Security 50 HP Fast Charge 36 HP LAN-Wireless Protection 22 HP MAC Address Pass Through 23 HP PC Hardware Diagnostics UEFI downloading 66 failure ID code 65 starting 66 using 65 HP PC Hardware Diagnostics Windows accessing 63, 64 downloading 64, 65 failure ID code 63 installing 65 using 63 HP Recovery media recovery 57 HP resources 1 HP Sure Recover 58 HP TechPulse 50 I infrared LEDs, identifying 6, 7 initiating Sleep and Hibernation 34 input power 69 International Association of Accessibility Professionals 74 J jacks audio-out (headphone)/audio-in

(microphone) combo 5 O one-finger slide touch screen gesture 27 operating environment 70 K P keyboard and optional mouse passwords using 27 keyboard backlight action key 14 keys action 13 esc 13 fn 13 Windows 13 L labels Bluetooth 16 regulatory 16 serial number 16 service 16 wireless certification 16 WLAN 16 left side components 4 lights AC adapter and battery 5 battery 5 camera privacy 10 caps lock 10 fn lock 10 microphone mute 10 power 10 privacy key 10 lights, mute 10 low battery level 37 low blue light mode 6 M maintenance Disk Cleanup 51 Disk Defragmenter 51 updating programs and drivers 52 managing power 34 memory card reader, identifying 4 microphone mute key, identifying 14 microphone mute light, identifying 10 mute light, identifying 10 mute volume action key 14 administrator 41 BIOS administrator 42-44 user 41 ports USB SuperSpeed port with HP Sleep and Charge 4 USB Type-C 32 USB Type-C DisplayPort 4 USB Type-C power connector 4 USB Type-C power connector and Thunderbolt port with HP Sleep and Charge 5 USB Type-C SuperSpeed 4 USB Type-C SuperSpeed port and DisplayPort 30 power battery 36 external 38 power button, identifying 13 power connector identifying 4, 5 identifying USB Type-C 5 power icon, using 36 power key, identifying 12 power lights 10 power settings, using 36 precision touchpad using 24 precision touchpad gestures four-finger swipe 26 four-finger tap 26 three-finger swipe 26 three-finger tap 25 two-finger slide 25 two-finger tap 25 privacy key light 10 privacy screen action key, identifying 14 product name and number, computer 16 public WLAN connection 20 R recovery 56 discs 57 media 57 Index 79 USB flash drive 57 recovery media 56 standards and legislation, accessibility 75 creating using HP Cloud Recovery SuperSpeed port and DisplayPort Download Tool 56 creating using Windows tools 56 regulatory information connector, connecting USB Type-

C 30 Sure Start using 62 regulatory label 16 wireless certification labels 16 Remote HP PC Hardware Diagnostics switch screen image action key 14 system restore 57 system restore point, creating 56 UEFI settings customizing 67 using 67 resources, accessibility 76 restoring 56 restoring and recovery methods 57 right side components 3 S screen brightness action keys 14 Section 508 accessibility standards 75 security cable 50 security cable slot, identifying 4 serial number, computer 16 service labels, locating 16 setup utility navigating and selecting 59 restoring factory settings 59 shipping the computer 54 shutdown 35 Sleep exiting 34 initiating 34 Sleep and Hibernation, initiating 34 slots security cable 4 software antivirus 49 Disk Cleanup 51 Disk Defragmenter 51 firewall 49 software installed, locating 3 software updates, installing 49 sound See audio sound settings, using 29 speaker volume action keys 14 speakers connecting 28 speakers, identifying 11 special keys, using 12 80 Index T tap touchpad and touch screen gesture 24 three-finger swipe touchpad gesture 26 three-finger tap touchpad gesture 25 touch screen gestures one-finger slide 27 touchpad settings 8 using 24 touchpad and touch screen gestures tap 24 two-finger pinch zoom 24 Touchpad buttons identifying 9 touchpad gestures four-finger swipe 26 four-finger tap 26 three-finger swipe 26 three-finger tap 25 two-finger slide 25 two-finger tap 25 Touchpad zone, identifying 9 TPM settings 62 transfer data 32 traveling with the computer 16, 54 turning off the computer 35 two-finger pinch zoom touchpad and touch screen gesture 24 two-finger slide touchpad gesture 25 two-finger tap touchpad gesture 25 U unresponsive system 35 updating programs and drivers 52 USB SuperSpeed port with HP Sleep and Charge, identifying 4 USB Type-C port, connecting 30, 32 USB Type-C power connector and Thunderbolt port with HP Sleep and Charge, identifying 5 USB Type-C power connector port, identifying 4 USB Type-C SuperSpeed port, identifying 4 user password 41 using passwords 41 using the keyboard and optional mouse 27 using the touchpad 24 V vents, identifying 16 video 29 DisplayPort device 30 USB Type-C 30 volume adjusting 14 mute 14 W web cam LEDs, identifying 6, 8 Windows backup 56 recovery media 56 system restore point 56 Windows Hello using 48 Windows key, identifying 13 Windows tools, using 56 wireless action key 15 wireless button 19 wireless certification label 16 wireless controls button 19 operating system 19 wireless key 19 wireless light 19 wireless network (WLAN) connecting 20 corporate WLAN connection 20 functional range 20 public WLAN connection 20 WLAN device 16 WLAN label 16 WWAN device 19, 20

LabelinformationModelHSNI46C 1. Imagesoftheelabelscreenareprovidedbelow:

RMNHSN-I46C Contains Intel Radio model: AX211NGW Contains FCC ID: PD9AX211NG Contains IC: 1000M-AX211NG Fibocom model: FB520 FCC ID: B94HNI46CPA Contains IC:21374-FB520 2. Theinformationthatwillbedisplayedontheelabelandinformationthatwillremainintheusermanualis shownbelow:

FCC ID/IC number Information on E-label In Manual Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.) Class A / B Digital Device user manual statements1 Yes No No Yes No Yes 3. Usersareabletoaccesstheinformationinnomorethanthreestepsinadevicesmenu. TheactualStepsare:ChooseescorF10>Advanced>ElectronicLabels Nospecialaccesscodesorpermissionsarerequiredtogothroughtheabovestepsbeyondentering auserdefinedpasswordtoprotectagainstunauthorizedaccesstothedevice. 4.Theinformationisstoredonthedevice,nospecialaccessoriesorsupplementalplugins

(e.g.,aSIM/USIMcard)arerequiredtoaccesstheinformation. No. 5.Usersareprovidedspecificinstructionsonhowtoaccesstheinformation. Yes. 6. Theaboveinformationmustbeprogrammedbytheresponsiblepartyandtheinformationmustbe securedinsuchamannerthatthirdpartiescannotmodifyit. Theelabelinformationispreprogrammedbythemanufacturer.Theusercannotmodifytheelabel information. 7. Apackaginglabelwillbeapplied,andinformationthatwillremainonthepackageis FCC ID/IC number Information Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.) on Packaging Yes Yes

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-21-2023 Ref: Attestation Statements Part 2.911(d)(5)(i)&(ii) Filing FCC ID: B94HNI46CPA Statement for 47 CFR section 2.911(d)(5)(i)

[HP Inc.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(ii)

[HP Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Liang Rong Chiao Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch 10F-1, 66, Jingmao 2nd Road, Nangang District, Taipei 115. Taiwan frances.liang@hp.com T+886 2 3789-2469

Date: January 17, 2023 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: B94HNI46CPA Pursuant to Sections 0.457(d) and 0.459 of the Commissions Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 180 days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Block Diagrams Operation Description Parts List & Placement/BOM Tune-Up Procedure Schematic Diagrams External Photos Internal Photos Test Setup Photos Users Manual Type of Confidentiality Requested Permanent Permanent Permanent Permanent Permanent

Permanent*

Permanent*

Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have Permanent confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, __________________________ Liang Rong Chiao Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch 10F-1, 66, Jingmao 2nd Road, Nangang District, Taipei 115. Taiwan frances.liang@hp.com T+886 2 3789-2469

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6412067.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Applicant Confidentiality Letter FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Date Subject: Confidentiality Request for Exhibits under FCC ID: B94HNI46CPA To Whom It May Concern:

Pursuant of Section 0.457 and 0.459 of the Commissions Rules and KDB 726920 D01 Confidentiality Request Procedures, we hereby request that the exhibits listed below, submitted in support of the certification application for FCC ID: B94HNI46CPA, be withheld permanently from public disclosure. Exhibit Type Schematics Block Diagram File Name FB520_SCH.pdf FB520_Block Diagram.pdf This request includes third party confidentiality for items not allowed to be accessed by HP Inc. The below third party and its confidentiality documents are listed as below:

Documents only accessible by Fibocom Wireless Inc.:

File Name FB520_SCH.pdf FB520_Block Diagram.pdf Exhibit Type Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Best Regards, Signed:

Printed name: Lucy Liu Title: Certification Manager Company Name: Fibocom Wireless Inc. Page 1 of 2 Third Party Confidentiality Letter FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Date Subject: Third Party Confidentiality Request for Exhibits under FCC ID: B94HNI46CPA To Whom It May Concern:

Pursuant of Section 0.457 and 0.459 of the Commissions Rules and KDB 726920 D01 Confidentiality Request Procedures, we hereby request that the exhibits listed below, submitted in support of the certification application for FCC ID: B94HNI46CPA, be withheld permanently from public disclosure:

Exhibit Type Schematics Block Diagram File Name FB520_SCH.pdf FB520_Block Diagram.pdf The above exhibits, owned solely by Fibocom Wireless Inc. and previously submitted to the Commissions permanent confidential exhibits for the certification of the Fibocom Wireless Inc. module with FCC ID: ZMOFB520, contain trade secrets and proprietary information not customarily release to the public. The public disclosure of these materials may be harmful to Fibocom Wireless Inc. and provide unjustified benefits to its competitors. Grantee of FCC ID:

B94HNI46CPA, is authorized to reference these exhibits in its application but not authorized to access them. Timco Engineering, Inc., as a TCB, is authorized to access these exhibits and include them in the filing for FCC ID: B94HNI46CPA, under permanent confidentiality. Best Regards, Signed:

Printed name: Lucy Liu Title: Certification Manager Company Name: Fibocom Wireless Inc. Page 2 of 2

Applicant Confidentiality Letter FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Date Subject: Confidentiality Request for Exhibits under FCC ID: B94HNI46CPA To Whom It May Concern:

Pursuant of Section 0.457 and 0.459 of the Commissions Rules and KDB 726920 D01 Confidentiality Request Procedures, we hereby request that the exhibits listed below, submitted in support of the certification application for FCC ID: B94HNI46CPA, be withheld permanently from public disclosure. Exhibit Type Schematics Block Diagram File Name FB520_SCH.pdf FB520_Block Diagram.pdf This request includes third party confidentiality for items not allowed to be accessed by HP Inc. The below third party and its confidentiality documents are listed as below:

Documents only accessible by Fibocom Wireless Inc.:

File Name FB520_SCH.pdf FB520_Block Diagram.pdf Exhibit Type Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Best Regards, Liang Rong Chiao Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch 10F-1, 66, Jingmao 2nd Road, Nangang District, Taipei 115. Taiwan frances.liang@hp.com T+886 2 3789-2469 Page 1 of 2 Third Party Confidentiality Letter FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Date Subject: Third Party Confidentiality Request for Exhibits under FCC ID: B94HNI46CPA To Whom It May Concern:

Pursuant of Section 0.457 and 0.459 of the Commissions Rules and KDB 726920 D01 Confidentiality Request Procedures, we hereby request that the exhibits listed below, submitted in support of the certification application for FCC ID: B94HNI46CPA, be withheld permanently from public disclosure:

Exhibit Type Schematics Block Diagram File Name FB520_SCH.pdf FB520_Block Diagram.pdf The above exhibits, owned solely by Fibocom Wireless Inc. and previously submitted to the Commissions permanent confidential exhibits for the certification of the Fibocom Wireless Inc. module with FCC ID: ZMOFB520, contain trade secrets and proprietary information not customarily release to the public. The public disclosure of these materials may be harmful to Fibocom Wireless Inc. and provide unjustified benefits to its competitors. Grantee of FCC ID:

B94HNI46CPA, is authorized to reference these exhibits in its application but not authorized to access them. Timco Engineering, Inc., as a TCB, is authorized to access these exhibits and include them in the filing for FCC ID: B94HNI46CPA, under permanent confidentiality. Best Regards, Liang Rong Chiao Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch 10F-1, 66, Jingmao 2nd Road, Nangang District, Taipei 115. Taiwan frances.liang@hp.com T+886 2 3789-2469 Page 2 of 2

3390 East Harmony Road Fort Collins Colorado 80528 United States To whom it may concern:

This device with FCC ID: B94HNI46CPA integrates a CAT-M module:

CAT-M module ZMOFB520 PCS 09/02/2022 22/24/27/90 FCC ID Equipment Class Date of Grant Rule Part No hardware design changes are made on the module, and the software has not been changed to increase the RF output power of the module and provided host level antenna gain is less than the original module grant. Pursuant to KDB 996369 D02, the original modular report (Report Number details see below) are submitted to represent the compliance of Part 2/22/24/27/90 conducted/radiated testing items of this device. Worst radiated cases found in module level testing are performed on the host level to ensure the compliance is kept. Modular Test Report Number SEWM2207000119RG01 SEWM2207000119RG03 _______________________________ Liang Rong Chiao Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch 10F-1, 66, Jingmao 2nd Road, Nangang District, Taipei 115. Taiwan frances.liang@hp.com T+886 2 3789-2469

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC IDB94HNI46CPA To whom it may concern:

Date: 2023.01.17 We, the undersigned, hereby authorize << SGS Taiwan Ltd.>> to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. a. Name, address and contact information of third party:

SGS Taiwan Ltd. Jim Chang Telephone: +886 2 2299 3279 Ext 1194 E-mail: jim.chang@sgs.com No. 134, Wu Kung Rd., New Taipei Industrial Park, Wu Ku District,New Taipei City, 24803 Taiwan b. Term of designation, unless earlier terminated by HP: 1 year. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TIMCO Engineering, Inc, still resides with << HP Inc. >>. This authorization is valid until further written notice from the applicant. __________________________ Liang Rong Chiao Worldwide Technical Regulations HP International Pte. Ltd., Taiwan Branch 10F-1, 66, Jingmao 2nd Road, Nangang District, Taipei 115. Taiwan frances.liang@hp.com T+886 2 3789-2469