FCC ID: B94-PF002 HyperX Pulsefire Haste Wireless Mouse

HP Inc.

3390 E Harmony Rd

Fort Collins, CO 80528

USA

Authorization on Behalf of HP Inc. for the US Federal Communications Commission

Office of Engineering and Technology and Other FCC Programs and Offices

I, Richard P. Tarsio, am on the Worldwide Technical Regulations staff of HP Inc. (“HP”) and Applicant/Grantee

Contact of Record for HP Inc. together with its subsidiaries and affiliates worldwide (collectively, “HP”) for HP’s

dealings with the United States Federal Communications Commission (“FCC”). I am duly authorized by HP to

make this Authorization on HP’s behalf.

2. This Authorization will designate the person named below to act on my behalf and HP’s behalf as an

authorized agent and representative, until further notice, with the additional power to designate one or more

third party agents for HP with regard to particular matters and applications. All acts carried out and requests

made by this named representative relating to any matter before the FCC, including requests for

confidentiality, shall have the same effect as mine.

3. Questions about the scope and effect of this Authorization should be addressed as follows:

Name: Vanessa Tsai

Title: Product Compliance Engineer

Address: HP Inc.

No. 1-5, Lixing 1st Road, East District

Hsinchu City, HSZ Taiwan

Telephone: +886 932285270

E-mail: vanessa.tsai@hp.com

Richard P. Tarsio

US/Canada Technical Regulations & Standards Engineer

Worldwide Technical Regulations

HP Inc.

(A) 3390 East Harmony Road, MS 66

Fort Collins, CO 80528

(T) +1 970 898 8713

(E) richard.tarsio@hp.com

Richard P. Tarsio

US/Canada Technical Regulations & Standards Engineer

HP Inc.

Date: 29 June 2021

I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was

executed at Fort Collins, Colorado on the date indicated below my signature.

1.

4.

HP Inc. 3390 East Harmony Road Mailstop 66 Fort Collins, CO 80528 hp.com Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Certification and Engineering Bureau ISED Canada 3701 Carling Avenue (Building 94) Ottawa, Ontario K2H 8S2 Date: 2021-07-12 Subject: Request to change in Identification To Whom It May Concern:

This application for Change of Identification request a new FCC ID as stipulated in 47 CFR 2.933 (b) for presently authorized equipment. This application by HP Inc. will establish a new FCC ID: B94-PF002 a new IC: 466C-PF002, PMN: HyperX Pulsefire Haste Wireless Mouse, HVIN: PF002, FVIN: N/A for the purpose of marketing. The original grant to Kingston Technology Company FCC ID: JIC-PF002, IC: 3880A-PF002, PMN: HyperX Pulsefire Haste Wireless Mouse, HVIN: PF002, FVIN: N/A will remain in effect. Per 47 CFR 2.933 (b) 1) The original identification is JIC-PF002 2) The original grant date is 4/8/2021 3) The equipment is electrically and functionally identical. Only the applicant, label, and FCC ID number are different. 4) The original test results are applicable and representative of this change ID device. 5) Exterior photographs are included in this application. Sincerely, By:

(Print name / Title) Vanessa Tsai / Product Compliance Engineer

(Signature)

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Certification and Engineering Bureau ISED Canada 3701 Carling Avenue (Building 94) Ottawa, Ontario K2H 8S2 Date: 2021-07-12 To Whom It May Concern:

The letter grants authorization for representative of HP Inc. to apply the FCC for a change in identification. This authorization applies to Kingston Technology Company FCC ID: JIC-PF002, granted on 4/8/2021. IC: 3880A-PF002, PMN: HyperX Pulsefire Haste Wireless Mouse, HVIN: PF002, FVIN: N/A, granted on 4/9/2021. The equipment is electrically identical. We are aware that HP Inc. intends to market the above referenced product under FCC ID: B94-PF002, IC: 466C-PF002, PMN: HyperX Pulsefire Haste Wireless Mouse, HVIN: PF002, FVIN: N/A The only change being the applicant, label and FCC ID on the device. The original test results, technical information and relevant documents continue to be representative of and applicable to the change ID equipment. Should there be any question, please feel free to contact us. Sincerely,

(Signature) George Shiu Project Engineer

(Print name/Title) By: