FCC ID: B94622ANHMW Intel Centrino Advanced-N 6200

 

HP EliteBook 2740p User Guide Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. Copyright 2010 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries or regions. Java is a U.S. trademark of Sun Microsystems, Inc. Microsoft, Windows, and Windows Vista are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: February 2010 Document Part Number: 599104-001 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

iii iv Safety warning notice Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Table of contents 1 Features Identifying hardware ............................................................................................................................. 1 Top components .................................................................................................................. 1 Pointing devices .................................................................................................. 1 Lights ................................................................................................................... 3 Buttons and switches .......................................................................................... 4 Keys .................................................................................................................... 5 Front components ................................................................................................................ 6 Right-side components ........................................................................................................ 7 Left-side components .......................................................................................................... 8 Rear components ................................................................................................................ 9 Bottom components ........................................................................................................... 10 Display ............................................................................................................................... 11 Wireless antennas (select models only) ............................................................................ 12 Additional hardware components ...................................................................................... 13 Identifying the labels ........................................................................................................................... 14 2 Using the tablet Tablet display components ................................................................................................................. 15 Rotating the display ............................................................................................................................ 16 Tablet mode ....................................................................................................................... 16 Notebook mode ................................................................................................................ 18 3 Wireless, modem, and local area network Using wireless devices (select models only) ...................................................................................... 20 Identifying wireless and network icons .............................................................................. 21 Using the wireless controls ................................................................................................ 21 Using the wireless button ................................................................................................... 21 Using Wireless Assistant software (select models only) .................................................... 22 Using HP Connection Manager (select models only) ........................................................ 22 Using operating system controls ........................................................................................ 23 Using a WLAN .................................................................................................................................... 24 Setting up a WLAN ............................................................................................................ 24 Protecting your WLAN ....................................................................................................... 24 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

v Connecting to a WLAN ...................................................................................................... 25 Roaming to another network .............................................................................................. 26 Using HP Mobile Broadband (select models only) ............................................................................. 27 Inserting a SIM ................................................................................................................... 27 Removing a SIM ................................................................................................................ 28 Using Bluetooth wireless devices (select models only) ...................................................................... 30 Bluetooth and Internet Connection Sharing (ICS) ............................................................. 30 Troubleshooting wireless connection problems ................................................................................. 31 Cannot create a WLAN connection ................................................................................... 31 Cannot connect to a preferred network ............................................................................. 32 Network icon is not displayed ............................................................................................ 32 Current network security codes are unavailable ................................................................ 32 WLAN connection is very weak ......................................................................................... 33 Cannot connect to the wireless router ............................................................................... 33 Using the modem (select models only) .............................................................................................. 34 Connecting a modem cable ............................................................................................... 34 Connecting a country-specific modem cable adapter ........................................................ 34 Selecting a location setting ................................................................................................ 35 Viewing the current location selection ............................................................... 35 Adding new locations when traveling ................................................................ 36 Solving travel connection problems .................................................................. 37 Connecting to a local area network (LAN) .......................................................................................... 39 4 Pointing devices and keyboard Using pointing devices ....................................................................................................................... 40 Setting pointing device preferences ................................................................................... 40 Using the TouchPad .......................................................................................................... 40 Using the pointing stick ...................................................................................................... 40 Connecting an external mouse .......................................................................................... 40 Using the keyboard ............................................................................................................................ 40 Using the keyboard light .................................................................................................... 40 Using hotkeys .................................................................................................................... 42 Displaying system information .......................................................................... 42 Initiating Sleep ................................................................................................... 43 Switching the screen image .............................................................................. 43 Viewing battery charge information ................................................................... 44 Enabling/disabling the TouchPad (fn+f5) .......................................................... 44 Decreasing screen brightness ........................................................................... 44 Increasing screen brightness ............................................................................ 44 Activating the ambient light sensor .................................................................. 44 Using QuickLook (select models only) ............................................................................................... 45 Installing QuickLook ........................................................................................................... 45 Using HP Quick Launch Buttons ........................................................................................................ 46 vi Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Opening the Quick Launch Buttons control panel .............................................................................. 47 Using HP QuickLook 3 ....................................................................................................................... 48 Using the pen ..................................................................................................................................... 48 Identifying the pen components ......................................................................................... 48 Holding the pen .................................................................................................................. 48 Performing mouse clicks with the pen ............................................................................... 49 Performing other procedures with the pen ......................................................................... 49 Pressure sensitivity ............................................................................................................ 49 Calibrating the pen ............................................................................................................. 50 Using the pen holder .......................................................................................................... 50 Setting pen preferences ..................................................................................................... 51 Using the embedded numeric keypad ................................................................................................ 51 Using the embedded numeric keypad ............................................................................... 51 Enabling and disabling the embedded numeric keypad .................................... 51 Switching key functions on the embedded numeric keypad ............................. 51 Cleaning the TouchPad and keyboard ............................................................................................... 52 5 Multimedia Multimedia features ............................................................................................................................ 53 Adjusting the volume ......................................................................................................... 53 Multimedia software ........................................................................................................................... 54 Accessing your preinstalled multimedia software .............................................................. 55 Installing your preloaded multimedia software ................................................................... 55 Installing multimedia software from a disc ......................................................................... 55 Audio .................................................................................................................................................. 56 Connecting external audio devices .................................................................................... 56 Checking your audio functions ........................................................................................... 56 Video .................................................................................................................................................. 58 Connecting an external monitor or projector ...................................................................... 58 Using the external monitor port ......................................................................... 58 Using the DreamColor display (select models only) ......................................... 58 Webcam ............................................................................................................................................. 59 Webcam tips ...................................................................................................................... 59 Adjusting webcam properties ............................................................................................. 59 Capturing business card images ....................................................................................... 60 6 Power management Setting power options ......................................................................................................................... 62 Using power-saving states ................................................................................................. 62 Initiating and exiting Sleep ................................................................................ 62 Initiating and exiting Hibernation ....................................................................... 63 Using the battery meter ..................................................................................................... 63 Using power plans ............................................................................................................. 63 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

vii Viewing the current power plan ......................................................................... 64 Selecting a different power plan ........................................................................ 64 Customizing power plans .................................................................................. 64 Setting password protection on wakeup ............................................................................ 64 Using external AC power .................................................................................................................... 65 Connecting the AC adapter ............................................................................................... 65 Using battery power ........................................................................................................................... 66 Finding battery information in Help and Support ............................................................... 66 Using Battery Check .......................................................................................................... 67 Displaying the remaining battery charge ........................................................................... 67 Inserting or removing the battery ....................................................................................... 67 Charging a battery ............................................................................................................. 68 Maximizing battery discharge time .................................................................................... 69 Managing low battery levels .............................................................................................. 69 Identifying low battery levels ............................................................................. 69 Resolving a low battery level ............................................................................. 71 Resolving a low battery level when external power is available ....... 71 Resolving a low battery level when a charged battery is available ........................................................................................... 71 Resolving a low battery level when no power source is available ........................................................................................... 71 Resolving a low battery level when the computer cannot exit Hibernation ....................................................................................... 71 Calibrating a battery ........................................................................................................... 71 Step 1: Fully charge the battery ........................................................................ 71 Step 2: Disable Hibernation and Sleep ............................................................. 72 Step 3: Discharge the battery ............................................................................ 72 Step 4: Fully recharge the battery ..................................................................... 73 Step 5: Reenable Hibernation and Sleep .......................................................... 73 Conserving battery power .................................................................................................. 73 Storing a battery ................................................................................................................ 74 Disposing of a used battery ............................................................................................... 74 Replacing the battery ........................................................................................................ 74 Testing an AC adapter ....................................................................................................................... 75 Shutting down the computer ............................................................................................................... 75 Identifying installed drives .................................................................................................................. 77 Handling drives ................................................................................................................................... 78 Improving hard drive performance ..................................................................................................... 79 Using Disk Defragmenter ................................................................................................... 79 Using Disk Cleanup ........................................................................................................... 79 Using HP 3D DriveGuard .................................................................................................................. 80 Identifying HP 3D DriveGuard status ................................................................................. 80 7 Drives viii Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using HP 3D DriveGuard software .................................................................................... 81 Replacing the hard drive in the hard drive bay ................................................................................... 82 8 External devices Using a USB device ........................................................................................................................... 86 Connecting a USB device .................................................................................................. 86 Stopping and removing a USB device ............................................................................... 86 Using USB legacy support ................................................................................................. 87 Using a 1394 device ........................................................................................................................... 88 Connecting a 1394 device ................................................................................................. 88 Stopping and removing a 1394 device .............................................................................. 88 Using external drives .......................................................................................................................... 89 Using optional external devices ......................................................................................... 89 Using the docking connector .............................................................................................................. 90 9 External media cards Using Media Card Reader cards ........................................................................................................ 91 Inserting a digital card ........................................................................................................ 91 Stopping and removing a digital card ................................................................................ 92 Using ExpressCards (select models only) .......................................................................................... 93 Configuring an ExpressCard .............................................................................................. 93 Inserting an ExpressCard .................................................................................................. 93 Stopping and removing an ExpressCard ........................................................................... 94 Using Smart Cards (select models only) ............................................................................................ 96 Inserting a smart card ........................................................................................................ 96 Removing a smart card ...................................................................................................... 96 10 Memory modules Adding or replacing a memory module .............................................................................................. 98 11 Security Protecting the computer ................................................................................................................... 101 Using passwords .............................................................................................................................. 102 Setting passwords in Windows ........................................................................................ 102 Setting passwords in Computer Setup ............................................................................ 102 BIOS administrator password .......................................................................................... 103 Managing a BIOS administrator password ...................................................... 104 Entering a BIOS administrator password ........................................................ 105 Using Computer Setup DriveLock ................................................................................... 105 Setting a DriveLock password ......................................................................... 106 Entering a DriveLock password ...................................................................... 106 Changing a DriveLock password .................................................................... 106 Removing DriveLock protection ...................................................................... 107 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

ix Using Computer Setup Auto DriveLock ........................................................................... 107 Entering an Automatic DriveLock password ................................................... 108 Removing Automatic DriveLock protection ..................................................... 108 Using Computer Setup security features .......................................................................................... 109 Securing system devices ................................................................................................. 109 Viewing Computer Setup System Information ................................................................. 109 Using Computer Setup System IDs ................................................................................. 110 Using antivirus software ................................................................................................................... 111 Using firewall software ..................................................................................................................... 112 Installing critical updates .................................................................................................................. 113 Using HP ProtectTools Security Manager (select models only) ....................................................... 114 Installing a security cable ................................................................................................................. 115 12 Software updates Updating software ............................................................................................................................ 116 Updating the BIOS ........................................................................................................................... 118 Determining the BIOS version ......................................................................................... 118 Downloading a BIOS update ........................................................................................... 119 Updating programs and drivers ........................................................................................................ 121 Using SoftPaq Download Manager .................................................................................................. 122 13 Backup and recovery Backing up your information ............................................................................................................. 124 Performing a recovery ...................................................................................................................... 126 Using the Windows recovery tools ................................................................................... 126 Using f11 .......................................................................................................................... 127 Using a Windows 7 operating system DVD (purchased separately) .............................. 127 14 Computer Setup Starting Computer Setup .................................................................................................................. 129 Using Computer Setup ..................................................................................................................... 129 Navigating and selecting in Computer Setup ................................................................... 129 Restoring factory settings in Computer Setup ................................................................. 130 Computer Setup menus ................................................................................................................... 130 File menu ......................................................................................................................... 131 Security menu .................................................................................................................. 131 Diagnostics menu ............................................................................................................ 132 System Configuration menu ............................................................................................ 133 15 MultiBoot About the boot device order ............................................................................................................. 136 Enabling boot devices in Computer Setup ....................................................................................... 138 Considering boot order changes ...................................................................................................... 139 x Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Choosing MultiBoot preferences ...................................................................................................... 140 Setting a new boot order in Computer Setup ................................................................... 140 Dynamically choosing a boot device using the F9 prompt ............................................... 140 Setting a MultiBoot Express prompt ................................................................................ 141 Entering MultiBoot Express preferences ......................................................................... 141 16 Management and printing Using Client Management Solutions ................................................................................................ 142 Configuring and deploying a software image ................................................................... 142 Managing and updating software ..................................................................................... 143 HP Client Manager for Altiris (select models only) .......................................... 143 HP CCM (Client Configuration Manager) (select models only) ....................... 144 HP SSM (System Software Manager) ............................................................. 144 Using Intel Active Management Technology (select models only) ................................................... 146 Enabling the iAMT solution .............................................................................................. 146 Using the MEBx setup utility menus ................................................................................ 146 Using the HP Universal Print Driver (select models only) ................................................................ 148 Index ................................................................................................................................................................. 149 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

xi xii Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

1 Features Identifying hardware To see a list of hardware installed in the computer, follow these steps:

1. 2. Select Start > Computer > System properties. In the left pane, click Device Manager. You can also add hardware or modify device configurations using Device Manager. NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing applications, running utilities, or changing Windows settings. Refer to Windows Help for more information. Top components Pointing devices Component

(1) TouchPad light Description

Off: TouchPad is enabled. Amber: TouchPad is disabled.

(2) TouchPad on/off control Enables/disables the TouchPad when pressed in combination with the fn key. Identifying hardware 1 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Component Description

(3)

(4)

(5)

(6)

(7)

(8)

(9) Pointing stick*

fn key Moves the pointer and selects or activates items on the screen. Enables/disables the TouchPad when pressed in combination with the f5 key. Left pointing stick button*

Functions like the left button on an external mouse. TouchPad*

Left TouchPad button*

Right TouchPad button*

TouchPad scroll zone*

Moves the pointer and selects or activates items on the screen. Functions like the left button on an external mouse. Functions like the right button on an external mouse. Scrolls up or down.

(10) Right pointing stick button*

Functions like the right button on an external mouse.

*This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Hardware and Sound > Mouse. 2 Chapter 1 Features Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Lights Component

(1) Power light

(2) Battery light

(3) Drive light

(4)

(5) Caps lock light TouchPad light

(6) Volume mute light

(7) Volume down light Description

On: The computer is on. Blinking: The computer is in the Sleep state. Off: The computer is off or in Hibernation. Amber: A battery is charging. Turquoise: A battery is close to full charge capacity. Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: If the computer is plugged into an external power source, the light turns off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level. Blinking turquoise: The hard drive is being accessed. Amber: HP 3D DriveGuard has temporarily parked the internal hard drive. On: Caps lock is on.

Off: TouchPad is enabled. Amber: TouchPad is disabled. Turquoise: Computer sound is on. Amber: Computer sound is off. Blinking: The volume scroll zone is being used to decrease speaker volume. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Identifying hardware 3 Component

(8)

(9) Volume up light Num lock light Buttons and switches Description Blinking: The volume scroll zone is being used to increase speaker volume. On: Num lock is on or the embedded numeric keypad is enabled. Component

(1)

(2)

(3)

(4) Internal display switch Volume mute button Volume down button Volume up button Description Turns off the display if the display is closed while the power is on. Mutes and restores speaker sound. Decreases computer volume. Increases computer volume. 4 Chapter 1 Features Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Keys Component Description

(1)

(2)

(3)

(4)

(5)

(6) esc key fn key Displays system information when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key or the esc key. Windows logo key Displays the Windows Start menu. Windows applications key Displays a shortcut menu for items beneath the pointer. Embedded numeric keypad keys Can be used like the keys on an external numeric keypad. Function keys Execute frequently used system functions when pressed in combination with the fn key. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Identifying hardware 5 Front components Component Description

(1)

(2)

(3)

(4) Webcam light On: The webcam is in use. External WWAN antenna button Opens the external WWAN antenna. External WWAN antenna Power switch Sends and receives wireless signals to communicate with WWANs.

When the computer is off, slide the switch to the right to turn on the computer.

When the computer is on, slide the switch to the right to shut down the computer.

When the computer is in the Sleep state, slide the switch to the right briefly to exit Sleep.

When the computer is in Hibernation, slide the switch to the right briefly to exit Hibernation. If the computer has stopped responding and Windows shutdown procedures are ineffective, slide the switch to the right and hold for at least 5 seconds to turn off the computer. To learn more about your power settings, select Start > Control Panel > System and Maintenance > Power Options.

(5) Vents (2) Enable airflow to cool internal components.

(6)

(7)

(8) Business card slot Display release latch Bluetooth compartment NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Holds a business card in position so that the webcam can capture an image. Opens the computer. Contains an optional Bluetooth device. 6 Chapter 1 Features Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Right-side components Component Description HP Fingerprint Sensor (fingerprint reader) Allows a fingerprint logon to Windows instead of a password logon.

(1)

(2) QuickWeb button

(3) QuickLook button

(4)

(5)

(6)

(7)

(8) Audio-out (headphone) jack/Audio-in

(microphone) jack Smart card reader USB ports (2) RJ-11 (modem) jack Security cable slot

When the computer is off, press the button to open HP QuickWeb.

When the computer is on, press the button to open the default Web browser.

When the computer is off, press the button to open HP QuickLook.

When the computer is on, press the button to open Software Setup. NOTE:

browser opens. If Software Setup is not available, the default Web Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. Also connects an optional headset microphone. NOTE: When a device is connected to the headphone jack, the computer speakers are disabled. Supports optional smart cards and Java Cards. Connect optional USB devices. Connects a modem cable. Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Identifying hardware 7 Left-side components Component Description

(1) Media Card Reader Supports the following optional digital card formats:

Memory Stick

Memory Stick Duo (adapter required)

Memory Stick Pro (adapter required)

Secure Digital (SD) Memory Card

MultiMediaCard (MMC)

xD-Picture Card xD-Picture Card Type H xD-Picture Card Type M Stores the pen. Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Pen holder Vent ExpressCard slot (select models only) Supports optional ExpressCards.

(2)

(3)

(4)

(5) Wireless light

Blue: An integrated wireless device, such as a wireless local area network (WLAN) device, the HP Mobile Broadband Module, and/or a Bluetooth device, is on. Amber: All wireless devices are off. Turns the wireless feature on or off, but does not create a wireless connection. NOTE: A wireless network must be set up in order to establish a wireless connection. Connects an optional IEEE 1394 or 1394a device, such as a camcorder. Provides power to a USB device, such as an optional external MultiBay, if used with a powered USB cable.

(6) Wireless switch

(7)

(8) 1394 port Powered USB port 8 Chapter 1 Features Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Rear components Component

(1) Jog dial Description In tablet mode, functions like the enter key and the up and down arrows on a standard keyboard.

Press inward to enter a command. Rotate up to scroll up. Rotate down to scroll down.

(2)

(3)

(4)

(5)

(6)

(7) Esc button Rotate button In tablet mode, allows you to exit or escape out of an application. In tablet mode, switches the image between landscape and portrait orientation. Ctrl+alt+del button In tablet mode:

While Windows is running, press the button with the pen to enter the ctrl+alt+del command.*

While the Computer Setup utility is running, press the button with the pen to enter the reset command. The computer resets and all unsaved information is lost. The reset function can be used to restore functionality when the system has become unresponsive. Connects an AC adapter. Connects a network cable. Connects an external VGA monitor or projector. Power connector RJ-45 (network) jack External monitor port

*To protect your work and the system, the ctrl+alt+delete command cannot be entered using the ctrl, alt, and del keys on the on-screen keyboard. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Identifying hardware 9 Bottom components Component Description

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9) Battery bay SIM slot Vents (5) Hard drive bay Docking connector Charge level indicator Battery release latch Holds the battery and subscriber identity module (SIM). Contains a wireless subscriber identity module (SIM) (select models only). The SIM slot is located inside the battery bay. Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Holds the hard drive, memory module slots, WLAN module (select models only), and WWAN module (select models only). Connects an optional docking device. Displays the approximate remaining battery charge. Releases the battery from the battery bay. Accessory battery connector Connects an optional accessory battery. Accessory battery connector door Slides open to expose the accessory battery connector. 10 Chapter 1 Features Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Display Component Description

(1)

(2)

(3)

(4)

(5)

(6)

(7) Webcam light (select models only) On: The webcam is in use. Webcam (select models only) Records audio and video and captures still photographs. Keyboard light button Opens and turns on the keyboard light. HP Fingerprint Sensor (fingerprint reader) Allows a fingerprint logon to Windows instead of a password logon. Internal microphones (2) Ambient light sensor Convertible hinge Record sound and transmit sound for video conferencing and Voice Over IP (VoIP). Automatically adjusts the display brightness based on the lighting conditions in your environment. Swivels the display and converts the computer from traditional notebook mode into tablet mode or vice versa. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Identifying hardware 11 Wireless antennas (select models only) The antennas send and receive signals from one or more wireless devices. These antennas are not visible from the outside of the computer. Component Description

(1)

(2)

(3)

(4) WWAN antenna (1)*

WLAN antennas (2)*

Sends and receives wireless signals to communicate with wireless wide area networks (WWANs). Send and receive wireless signals to communicate with wireless local area networks (WLANs). External WWAN antenna button**

Press to open the external WWAN antenna. External WWAN antenna**

Sends and receives wireless signals to communicate with WWANs.

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions.

**Before connecting to a WWAN, press the WWAN antenna button to open the external WWAN antenna to a vertical position. The external WWAN antenna allows you to connect to a WWAN, and then to the Internet, using the integrated HP Broadband Wireless Module and service from a supported Cellular network operator. Do not close the external WWAN antenna if you are connected to a WWAN. To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region. These notices are located in Help and Support. 12 Chapter 1 Features Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Additional hardware components Component Description

(1)

(2)

(3)

(4)

(5) Power cord*

AC adapter Battery*

Modem cable (select models only)*

Country- or region-specific modem cable adapter

(select models only)*

Connects an AC adapter to an AC outlet. Converts AC power to DC power. Powers the computer when the computer is not plugged into an external power source. Connects the internal modem to an RJ-11 telephone jack or to a country- or region-specific modem cable adapter. Adapts the modem cable to a non-RJ-11 telephone jack.

*Modem cables, batteries, modem cable adapters, and power cords vary in appearance by country or region. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Identifying hardware 13 Identifying the labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer:

Service tagProvides important information, including the following:

Product Name (1). This is the product name affixed to the front of your computer. Serial Number (s/n) (2). This is an alphanumeric identifier that is unique to each product. Part number/Product number (p/n) (3). This number provides specific information about the product's hardware components. The part number helps a service technician to determine what components and parts are needed. Model description (4). This is an alphanumeric identifier used to locate documents, drivers, and support for your computer.

Warranty period (5). This number describes the duration (in years) of the warranty period for this computer. Have this information available when you contact technical support. The service tag label is affixed to the bottom of the computer.

Microsoft Certificate of AuthenticityContains the Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. This certificate is affixed to the bottom of the computer.

Regulatory labelProvides regulatory information about the computer. The regulatory label is affixed inside the battery bay.

Modem approval labelProvides regulatory information about the modem and lists the agency approval markings required by some of the countries in which the modem has been approved for use. You may need this information when traveling internationally. The modem approval label is affixed inside the memory module compartment.

Wireless certification label(s) (select models only)Provide information about optional wireless devices and the approval markings of some of the countries or regions in which the devices have been approved for use. An optional device may be a wireless local area network (WLAN) device or an optional Bluetooth device. If your computer model includes one or more wireless devices, one or more certification labels are included with your computer. You may need this information when traveling internationally. Wireless certification labels are affixed to the bottom of the computer.

SIM (subscriber identity module) label (select models only)Provides the ICCID (Integrated Circuit Card Identifier) of your SIM. This label is located inside the battery bay. HP Mobile Broadband Module serial number label (select models only)Provides the serial number of your HP Mobile Broadband Module. This label is located inside the battery bay. 14 Chapter 1 Features Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

2 Using the tablet Tablet display components Component

(1) Ctrl+alt+del button*

(2)

(3)

(4)

(5) Rotate button Convertible hinge Esc button Jog dial*

Description

While Windows is running, press the button with the pen to enter the ctrl+alt+delete command.

While the Computer Setup utility is running, press the button with the pen to enter the reset command. The computer resets and all unsaved information is lost. The reset function can be used to restore functionality when the system has become unresponsive. Switches the image between landscape and portrait orientation. Swivels the display and converts the computer from traditional notebook mode into tablet mode or vice versa. Allows you to exit or escape out of a program. Functions like the enter key and the up and down arrow keys on a standard keyboard:

Press to enter a command. Rotate up to scroll up. Rotate down to scroll down. Tablet display components 15 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

(6) Pen holder Stores the pen.

*This table describes default settings. For information about changing the functions of the Ctrl+alt+del button and jog dial, select Start > Control Panel > Hardware and Sound > Tablet PC Settings. To protect your work and the system, the ctrl+alt+delete command cannot be entered using the ctrl, alt, and del keys on the on-screen keyboard. Rotating the display The computer display can rotate from traditional notebook mode to tablet mode. NOTE: When the computer is docked in either notebook mode or tablet mode, the display will not rotate. Tablet mode To change the computer from notebook mode to tablet mode:

1. Slide the display release latch to release the display (1), and then open the computer display (2). 16 Chapter 2 Using the tablet Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

2. Rotate the computer display clockwise until it snaps into place facing away from the keyboard. 3. Tilt the computer display downward onto the keyboard until it snaps into place. In tablet mode, the screen display automatically rotates from portrait to landscape as it is being turned. NOTE:

automatic rotation of the screen display. If antennae on the computer are held in close proximity to the body, the antennae may disable Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Rotating the display 17 Notebook mode To change the computer from tablet mode to notebook mode:

1. Slide the display release latch (1). 2. Open the computer display (2). 18 Chapter 2 Using the tablet Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

3. Rotate the computer display counterclockwise until it snaps into place facing the keyboard. NOTE: To prevent a lack of response when you turn on the computer, be sure that the battery is firmly seated. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Rotating the display 19 3 Wireless, modem, and local area network Using wireless devices (select models only) Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with one or more of the following wireless devices:

Wireless local area network (WLAN) deviceConnects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, each mobile wireless device communicates with a wireless router or a wireless access point.

HP Mobile Broadband ModuleA wireless wide area network (WWAN) device that provides access to information wherever mobile network operator service is available. In a WWAN, each mobile device communicates to a mobile network operators base station. Mobile network operators install networks of base stations (similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries. Bluetooth deviceCreates a personal area network (PAN) to connect to other Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close together typically within 10 meters (approximately 33 feet) of each other. Computers with WLAN devices support one or more of the following IEEE industry standards:

802.11b, the first popular standard, supports data rates of up to 11 Mbps and operates at a frequency of 2.4 GHz. 802.11g supports data rates of up to 54 Mbps and operates at a frequency of 2.4 GHz. An 802.11g WLAN device is backward compatible with 802.11b devices, so they can operate on the same network. 802.11a supports data rates of up to 54 Mbps and operates at a frequency of 5 GHz. NOTE: 802.11a is not compatible with 802.11b and 802.11g. 802.11n supports data rates of up to 450 Mbps and may operate at 2.4 GHz or 5 GHz, making it backward compatible with 802.11a, b, and g. NOTE: The specifications for the 802.11n WLAN are draft specifications and are not final. If the final specifications differ from the draft specifications, it may affect the ability of the computer to communicate with other 802.11n WLAN devices. 20 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

For more information on wireless technology, refer to the information and Web site links provided in Help and Support. Identifying wireless and network icons Icon Name Description Wireless (connected) Identifies the location of the wireless lights and the wireless buttons on the computer. Also identifies the Wireless Assistant software on the computer and indicates that one or more of the wireless devices are on. Wireless

(disconnected) Identifies the Wireless Assistant software on the computer and indicates that all of the wireless devices are off. HP Connection Manager Opens HP Connection Manager, which enables you to create a connection with an HP Mobile Broadband device (select models only). Wired network

(connected) Indicates that one or more of your network drivers are installed and one or more network devices are connected to the network. Network (connected) Indicates that one or more of your network drivers are installed, one or more network devices are connected to a wireless network, and one or more network devices may be connected to a wired network. Network

(disconnected) Indicates that one or more of your network drivers are installed and wireless connections are available, but no network devices are connected to a wired or wireless network. Network (disabled/

disconnected) Indicates that one or more of your network drivers are installed, no wireless connections are available or all wireless network devices are disabled by the wireless button or Wireless Assistant, and no network devices are connected to a wired network. Wired network

(disabled/

disconnected) Indicates that one or more of your network drivers are installed, all network devices or all wireless devices are disabled in Windows Control Panel, and no network devices are connected to a wired network. Using the wireless controls You can control the wireless devices in your computer using these features:

Wireless button or wireless switch (referred to in this guide as the wireless button)

Wireless Assistant software (select models only)

HP Connection Manager software (select models only) Operating system controls Using the wireless button The computer has a wireless button, one or more wireless devices, and one or two wireless lights, depending on the model. All of the wireless devices on your computer are enabled at the factory, so the wireless light is on (blue) when you turn on the computer. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using wireless devices (select models only) 21 The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. If the wireless light is blue, at least one wireless device is on. If the wireless light is off, all wireless devices are off. NOTE: On some models, the wireless light is amber when all wireless devices are off. Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or turn off the wireless devices simultaneously. Individual wireless devices can be controlled through Wireless Assistant software (select models only) or through Computer Setup. NOTE:

you reenable your devices. If the wireless devices are disabled by Computer Setup, the wireless button will not work until Using Wireless Assistant software (select models only) A wireless device can be turned on or off using the Wireless Assistant software. If a wireless device is disabled by Computer Setup, it must be reenabled by Computer Setup before it can be turned on or off using Wireless Assistant. NOTE: Enabling or turning on a wireless device does not automatically connect the computer to a network or a Bluetooth-enabled device. To view the state of the wireless devices, click the Show hidden icons icon, the arrow at the left of the notification area, and position the cursor over the wireless icon. If the wireless icon is not displayed in the notification area, complete the following steps to change the Wireless Assistant properties:

1. Select Start > Control Panel > Hardware and Sound > Windows Mobility Center. 2. Click the wireless icon in the Wireless Assistant tile, which is located in the bottom row of Windows Mobility Center. 3. Click Properties. 4. Select the check box next to HP Wireless Assistant icon in notification area. 5. Click Apply. 6. Click Close. For more information, refer to the Wireless Assistant software Help:

1. Open Wireless Assistant by clicking the wireless icon in Windows Mobility Center. 2. Click the Help button. Using HP Connection Manager (select models only) You can use HP Connection Manager to connect to WWANs using the HP Mobile Broadband device in your computer (select models only). To start Connection Manager, click the Connection Manager icon in the notification area, at the far right of the taskbar. or Select Start > All Programs > HP Connection Manager > HP Connection Manager. 22 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

For more details about using Connection Manager, refer to the Connection Manager software Help. Using operating system controls Some operating systems also offer a way to manage integrated wireless devices and the wireless connection. For example, Windows provides the Network and Sharing Center that allows you to set up a connection or network, connect to a network, manage wireless networks, and diagnose and repair network problems. To access the Network and Sharing Center, select Start > Control Panel > Network and Internet >

Network and Sharing Center. For more information, refer to Windows Help and Support. Select Start > Help and Support. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using wireless devices (select models only) 23 Using a WLAN With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably.

A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points that can accommodate a large number of computers and accessories and can separate critical network functions. A home or small office WLAN typically uses a wireless router, which allows several wireless and wired computers to share an Internet connection, a printer, and files without requiring additional pieces of hardware or software. To use the WLAN device in your computer, you must connect to a WLAN infrastructure (provided through a service provider or a public or corporate network). Setting up a WLAN To set up a WLAN and connect to the Internet, you need the following equipment:

A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider (ISP) A wireless router (purchased separately) (2) The wireless computer (3)

The illustration below shows an example of a wireless network installation that is connected to the Internet. As your network grows, additional wireless and wired computers can be connected to the network to access the Internet. For help in setting up your WLAN, refer to the information provided by your router manufacturer or your ISP. Protecting your WLAN Because the WLAN standard was designed with only limited security capabilitiesbasically to foil casual eavesdropping rather than more powerful forms of attackit is essential to understand that WLANs are vulnerable to well-known and well-documented security weaknesses. WLANs in public areas, or hotspots, like coffee shops and airports, may not provide any security. New technologies are being developed by wireless manufacturers and hotspot service providers that make the public environment more secure and anonymous. If you are concerned about the security of your computer in a hotspot, limit your network activities to noncritical e-mail and basic Internet surfing. 24 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. The common security levels are Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP). Because wireless radio signals travel outside the network, other WLAN devices can pick up unprotected signals and either connect to your network (uninvited) or capture information being sent across it. However, you can take precautions to protect your WLAN:

Use a wireless transmitter with built-in security Many wireless base stations, gateways, and routers provide built-in security features such as wireless security protocols and firewalls. With the correct wireless transmitter, you can protect your network from the most common wireless security risks.

Work behind a firewall A firewall is a barrier that checks both data and requests for data that are sent to your network and then discards any suspicious items. Firewalls are available in many varieties, both software and hardware. Some networks use a combination of both types.

Use wireless encryption A variety of sophisticated encryption protocols is available for your WLAN. Find the solution that works best for your network security:

Wired Equivalent Privacy (WEP) is a wireless security protocol that uses a WEP key to encode or encrypt all network data before it is transmitted. Usually, you can allow the network to assign the WEP key. Alternatively, you can set up your own key, generate a different key, or choose other advanced options. Without the correct key, others will not be able to use the WLAN.

WPA (Wi-Fi Protected Access), like WEP, uses security settings to encrypt and decrypt data that is transmitted over the network. However, instead of using one static security key for encryptions as WEP does, WPA uses temporal key integrity protocol (TKIP) to dynamically generate a new key for every packet. It also generates different sets of keys for each computer on the network. Connecting to a WLAN To connect to the WLAN, follow these steps:

1. Be sure that the WLAN device is on. If it is on, the wireless light is on. If the wireless light is off, press the wireless button. NOTE: On some models, the wireless light is amber when all wireless devices are off. 2. Click the network icon in the notification area, at the far right of the taskbar. 3. Select your WLAN from the list. 4. Click Connect. If the network is a security-enabled WLAN, you are prompted to enter a network security key, which is a security code. Type the code, and then click OK to complete the connection. NOTE:

If no WLANs are listed, you are out of range of a wireless router or access point. NOTE:

If you do not see the network you want to connect to, click Open Network and Sharing Center, and then click Set up a new connection or network. A list of options is displayed. You can choose to manually search for and connect to a network or to set up a new network connection. Using a WLAN 25 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

After the connection is made, place the mouse pointer over the network icon in the notification area, at the far right of the taskbar, to verify the name and status of the connection. NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. More information about using a WLAN is available through the following resources:

Information from your ISP and the manufacturer's instructions included with your wireless router and other WLAN equipment Information and Web site links provided in Help and Support

For a list of public WLANs near you, contact your ISP or search the Web. Web sites that list public WLANs include Cisco Internet Mobile Office Wireless Locations, Hotspotlist, and Geektools. Check with each public WLAN location for cost and connection requirements. For additional information on connecting your computer to a corporate WLAN, contact your network administrator or IT department. Roaming to another network When you move your computer within range of another WLAN, Windows attempts to connect to that network. If the attempt is successful, your computer is automatically connected to the new network. If Windows does not recognize the new network, follow the same procedure you used initially to connect to your WLAN. 26 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using HP Mobile Broadband (select models only) HP Mobile Broadband enables your computer to use wireless wide area networks (WWANs) to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a mobile network operator), which in most cases is a mobile phone network operator. Coverage for HP Mobile Broadband is similar to mobile phone voice coverage. When used with mobile network operator service, HP Mobile Broadband gives you the freedom to stay connected to the Internet, send e-mail, or connect to your corporate network whether you are on the road or outside the range of Wi-Fi hotspots. HP supports the following technologies:

HSPA (High Speed Packet Access), which provides access to networks based on the Global System for Mobile Communications (GSM) telecommunications standard. EV-DO (Evolution Data Optimized), which provides access to networks based on the code division multiple access (CDMA) telecommunications standard. You may need the HP Mobile Broadband Module serial number to activate mobile broadband service. The serial number is printed on a label inside the battery bay of your computer. Some mobile network operators require the use of a subscriber identity module (SIM). A SIM contains basic information about you, such as a PIN, as well as network information. Some computers include a SIM that is preinstalled in the battery bay. If the SIM is not preinstalled, it may be provided in the HP Mobile Broadband information provided with your computer or the mobile network operator may provide it separately from the computer. For information on inserting and removing the SIM, refer to the Inserting a SIM and Removing a SIM sections in this chapter. For information on HP Mobile Broadband and how to activate service with a preferred mobile network operator, refer to the mobile broadband information included with your computer. For additional information, see the HP Web site at http://www.hp.com/go/mobilebroadband (US only). Inserting a SIM CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM. To insert a SIM:

1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch to the right. Then shut down the computer through the operating system. 2. Close the display. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the battery bay toward you. 6. Remove the battery. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using HP Mobile Broadband (select models only) 27 7. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated. 8. Replace the battery. NOTE: HP Mobile Broadband will be disabled if the battery is not replaced. 9. Turn the computer right-side up, and then reconnect external power and external devices. 10. Turn on the computer. Removing a SIM To remove a SIM:

1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch to the right. Then shut down the computer through the operating system. 2. Close the display. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the battery bay toward you. 6. Remove the battery. 28 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

7. Press in on the SIM (1), and then remove it from the slot (2). 8. Replace the battery. 9. Turn the computer right-side up, and then reconnect external power and external devices. 10. Turn on the computer. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using HP Mobile Broadband (select models only) 29 Using Bluetooth wireless devices (select models only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices, such as the following:

Computers (desktop, notebook, PDA) Phones (cellular, cordless, smart phone) Imaging devices (printer, camera) Audio devices (headset, speakers)

Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network

(PAN) of Bluetooth devices. For information on configuring and using Bluetooth devices, refer to the Bluetooth software Help. Bluetooth and Internet Connection Sharing (ICS) HP does not recommend setting up one computer with Bluetooth as a host and using it as a gateway through which other computers may connect to the Internet. When two or more computers are connected using Bluetooth, and Internet Connection Sharing (ICS) is enabled on one of the computers, the other computers may not be able to connect to the Internet using the Bluetooth network. The strength of Bluetooth is in synchronizing information transfers between your computer and wireless devices including cellular phones, printers, cameras, and PDAs. The inability to consistently connect two or more computers to share the Internet through Bluetooth is a limitation of Bluetooth and the Windows operating system. 30 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Troubleshooting wireless connection problems Some possible causes for wireless connection problems include the following:

Wireless device is not installed correctly or has been disabled.

Wireless device or router hardware has failed. Network configuration (SSID or security) has been changed.

Wireless device encountered interference from other devices. NOTE: Wireless networking devices are included with select computer models only. If wireless networking is not listed in the feature list on the side of the original computer package, you may add wireless networking capability to the computer by purchasing a wireless networking device. Before working your way through the sequence of possible solutions to your network connection problem, be sure that device drivers are installed for all wireless devices. Use the procedures in this chapter to diagnose and repair a computer that does not connect to the network you want to use. Cannot create a WLAN connection If you have a problem connecting to a WLAN, confirm that the integrated WLAN device is properly installed on your computer:

NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. Refer to Windows Help and Support for more information. 1. 2. Select Start > Control Panel > System and Security. In the System area, click Device Manager. 3. Click the arrow next to Network adapters to expand the list and show all adapters. 4. Identify the WLAN device from the Network adapters list. The listing for a WLAN device may include the term wireless, wireless LAN, WLAN, Wi-Fi, or 802.11. If no WLAN device is listed, either your computer does not have an integrated WLAN device, or the driver for the WLAN device is not properly installed. For more information on troubleshooting WLANs, refer to the Web site links provided in Help and Support. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Troubleshooting wireless connection problems 31 Cannot connect to a preferred network Windows can automatically repair a corrupted WLAN connection:

If there is a network icon in the notification area, at the far right of the taskbar, right-click the icon, and then click Troubleshoot problems. Windows resets your network device and attempts to reconnect to one of the preferred networks. If there is no network icon in the notification area, follow these steps:

1. Select Start > Control Panel > Network and Internet > Network and Sharing Center. 2. Click Troubleshoot problems and select the network you wish to repair. Network icon is not displayed If the network icon is not displayed in the notification area after you configure the WLAN, the software driver is either missing or corrupted. A Windows Device not Found error message may also be displayed. The driver must be reinstalled. To get the latest version of the WLAN device software for your computer, follow these steps:

1. Open your Internet browser and go to http://www.hp.com/support. 2. Select your country or region. 3. Click the option for software and driver downloads, and then type your computer model number in the search box. 4. Press enter, and then follow the on-screen instructions. NOTE:

site for the latest software. If the WLAN device you are using was purchased separately, consult the manufacturer's Web Current network security codes are unavailable If you are prompted for a network key or a name (SSID) when connecting to a WLAN, the network is protected by security. You must have the current codes to make a connection on a secure network. The SSID and network key are alphanumeric codes that you enter into your computer to identify your computer to the network.

For a network connected to your personal wireless router, review the router user guide for instructions on setting up the same codes on both the router and the WLAN device. For a private network, such as a network in an office or at a public Internet chat room, contact the network administrator to obtain the codes, and then enter the codes when prompted to do so. Some networks change the SSID or network keys used in their routers or access points on a regular basis to improve security. You must change the corresponding code in your computer accordingly. 32 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

If you are provided with new wireless network keys and SSID for a network, and if you have previously connected to that network, follow the steps below to connect to the network:

1. Select Start > Control Panel > Network and Internet > Network and Sharing Center. 2. Click Manage wireless networks in the left panel. A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs are active, several will be displayed. 3. Select the network in the list, right-click the network, and then click Properties. NOTE:

the router or access point is operating. If the network you want is not listed, check with the network administrator to be sure that 4. Click the Security tab, and then enter the correct wireless encryption data into the Network security key field. 5. Click OK to save these settings. WLAN connection is very weak If the connection is very weak, or if your computer cannot make a connection to a WLAN, minimize interference from other devices, as follows:

Move your computer closer to the wireless router or access point.

Temporarily disconnect other wireless devices such as a microwave, cordless phone, or cellular phone to be sure that they are not interfering. If the connection does not improve, try forcing the device to reestablish all connection values:

1. Select Start > Control Panel > Network and Internet > Network and Sharing Center. 2. Click Manage wireless networks in the left panel. A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs are active, several will be displayed. 3. Click a network, and then click Remove. Cannot connect to the wireless router If you are trying to connect to the wireless router and are unsuccessful, reset the wireless router by removing power from the router for 10 to 15 seconds. If the computer still cannot make a connection to a WLAN, restart the wireless router. For details, refer to the router manufacturer's instructions. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Troubleshooting wireless connection problems 33 Using the modem (select models only) The modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable (included with select models only). In some countries, a country-specific modem cable adapter (included with select models only) is also required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not compatible with the modem. WARNING! Connecting the internal analog modem to a digital line can permanently damage the modem. Immediately disconnect the modem cable if you accidentally connect it to a digital line. If the modem cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end (2) of the cable toward the computer. Connecting a modem cable WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem cable (included with select models only) or telephone cable into the RJ-45 (network) jack. To connect a modem cable:

1. 2. Plug the modem cable into the modem jack (1) on the computer. Plug the modem cable into the RJ-11 telephone wall jack (2). Connecting a country-specific modem cable adapter Telephone jacks vary by country. To use the modem and the modem cable (included with select models only) outside the country in which you purchased the computer, you must obtain a country-specific modem cable adapter (included with select models only). 34 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack, follow these steps:

1. 2. 3. Plug the modem cable into the modem jack (1) on the computer. Plug the modem cable into the country-specific modem cable adapter (2). Plug the country-specific modem cable adapter (3) into the telephone wall jack. Selecting a location setting Viewing the current location selection To view the current location setting for the modem, follow these steps:

1. Select Start > Control Panel. 2. Click Clock, Language, and Region. 3. Click Region and Language. 4. Click the Location tab to display your location. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using the modem (select models only) 35 Adding new locations when traveling By default, the only location setting available to the modem is a location setting for the country in which you purchased the computer. As you travel to different countries, set the internal modem to a location setting that meets the operating standards of the country in which you are using the modem. As you add new location settings, they are saved by the computer so that you can switch among settings at any time. You can add multiple location settings for any country. CAUTION: To prevent losing your home country settings, do not delete your current modem country settings. To enable modem use in other countries while preserving your home country configuration, add a new configuration for each location in which you will use the modem. CAUTION: To prevent configuring the modem in a way that violates the telecommunications regulations and laws of the country you are visiting, select the country in which the computer is located. The modem may not function properly if the correct country selection is not made. To add a location setting for the modem, follow these steps:

1. Select Start > Devices and Printers. 2. Right-click the device that represents your computer, and click Modem settings. NOTE: You must set up an initial (current) location area code before you can view the Dialing Rules tab. If you do not have a location set up, you will be prompted to enter the location when you click Modem settings. 3. Click the Dialing Rules tab. 4. Click New. (The New Location window is displayed.) 5. 6. 7. In the Location name box, type a name (such as home or work) for the new location setting. Select a country or region from the Country/region drop-down list. (If you select a country or region that is not supported by the modem, the Country/region selection for USA or UK is displayed by default.) Enter the area code, a carrier code (if necessary), and the number to access an outside line (if necessary). 8. Next to Dial using, click Tone or Pulse. 9. Click OK to save your new location setting. (The Phone and Modem window is displayed.) 10. Do one of the following:

To set your new location setting as the current location, click OK. To select another location setting as the current location setting, select your preference from the settings in the Location list, and then click OK. NOTE: You can use the preceding procedure to add location settings for places within your own country as well as in other countries. For example, you could add a setting named Work that includes dialing rules for accessing an outside line. 36 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Solving travel connection problems If you experience modem connection problems when using the computer outside of the country in which you purchased it, try the following suggestions:

Check the telephone line type. The modem requires an analog, not a digital, telephone line. A line described as a PBX line is usually a digital line. A telephone line described as a data line, fax machine line, modem line, or standard telephone line is usually an analog line. Check for pulse or tone dialing. An analog telephone line supports one of two dialing modes: pulse dialing or tone dialing. These dialing mode options are selected in the Phone and Modem settings. The dialing mode option selected must match the dialing mode supported by the telephone line in your location. To determine the dialing mode supported by a telephone line, dial a few digits on the telephone, and then listen for clicks (pulses) or tones. Clicks indicate that the telephone line supports pulse dialing. Tones indicate that the telephone line supports tone dialing. To change the dialing mode in your current modem location setting, follow these steps:

1. Select Start > Devices and Printers. 2. Right-click the device that represents your computer, and click Modem settings. 3. Click the Dialing Rules tab. 4. Select your modem location setting. 5. Click Edit. 6. Click either Tone or Pulse. 7. Click OK twice. Check the telephone number you are dialing and the response of the remote modem. Dial a telephone number, make sure there is a response from the remote modem, and then hang up. Set the modem to ignore dial tones. If the modem receives a dial tone it does not recognize, it does not dial and displays a No Dial Tone error message. To set the modem to ignore all dial tones before dialing, follow these steps:

1. Select Start > Devices and Printers. 2. Right-click the device that represents your computer, and click Modem settings. 3. Click the Modems tab. 4. Click the listing for the modem. 5. Click Properties. 6. Click Modem. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using the modem (select models only) 37 7. Clear the check box for Wait for dial tone before dialing. 8. Click OK twice. 38 Chapter 3 Wireless, modem, and local area network Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Connecting to a local area network (LAN) Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer. To connect the network cable:

1. 2. Plug the network cable into the network jack (1) on the computer. Plug the other end of the cable into a network wall jack (2). WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem or telephone cable into the RJ-45 (network) jack. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Connecting to a local area network (LAN) 39 4 Pointing devices and keyboard Using pointing devices Setting pointing device preferences Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options. To access Mouse Properties, select Start > Control Panel > Hardware and Sound > Mouse. Using the TouchPad To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer to go. Use the TouchPad buttons like the corresponding buttons on an external mouse. To scroll up and down using the TouchPad vertical scroll zone, slide your finger up or down over the lines. NOTE:

If you are using the TouchPad to move the pointer, you must lift your finger off the TouchPad before moving it to the scroll zone. Simply sliding your finger from the TouchPad to the scroll zone will not activate the scrolling function. Using the pointing stick Press the pointing stick in the direction you want to move the pointer on the screen. Use the left and right pointing stick buttons as you would the left and right buttons on an external mouse. Connecting an external mouse You can connect an external USB mouse to the computer using one of the USB ports on the computer. A USB mouse can also be connected to the system using the ports on an optional docking device. Using the keyboard Using the keyboard light The keyboard light illuminates the computer keyboard in low light conditions. 40 Chapter 4 Pointing devices and keyboard Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

To open and turn on the keyboard light, press the keyboard light button.

To turn off and close the keyboard light, gently press the keyboard light button until it clicks into place. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using the keyboard 41 Using hotkeys Hotkeys are combinations of the fn key (1) and either the esc key (2) or one of the function keys (3). The icons on the f3 through f5, and f8 through f11 keys represent the hotkey functions. Hotkey functions and procedures are discussed in the following sections. Function Display system information. Initiate Sleep. Switch the screen image. Enable/disable the TouchPad Display battery information. Decrease screen brightness. Increase screen brightness. Activate the ambient light sensor. Hotkey fn+esc fn+f3 fn+f4 Fn+f5 fn+f8 fn+f9 fn+f10 fn+f11 To use a hotkey command on the computer keyboard, follow either of these steps:

Briefly press the fn key, and then briefly press the second key of the hotkey command. or Press and hold down the fn key, briefly press the second key of the hotkey command, and then release both keys at the same time. Displaying system information Press fn+esc to display information about system hardware components and the system BIOS version number. 42 Chapter 4 Pointing devices and keyboard Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

In the Windows fn+esc display, the version of the system BIOS (basic input-output system) is displayed as the BIOS date. On some computer models, the BIOS date is displayed in decimal format. The BIOS date is sometimes called the system ROM version number. Initiating Sleep CAUTION: To reduce the risk of information loss, save your work before initiating Sleep. Press fn+f3 to initiate Sleep. When Sleep is initiated, your information is stored in system memory, the screen is cleared, and power is conserved. While the computer is in the Sleep state, the power lights blink. The computer must be on before you can initiate Sleep. If a critical battery level occurs while the computer is in the Sleep state, the computer initiates NOTE:

Hibernation and the information stored in memory is saved to the hard drive. The factory setting for critical battery action is Hibernate, but this setting can be changed using Power Options in Windows Control Panel. To exit Sleep, briefly slide the power switch to the right. The function of the fn+f3 hotkey can be changed. For example, you can set the fn+f3 hotkey to initiate Hibernation instead of Sleep. NOTE:

hotkey. In all Windows operating system windows, references to the sleep button apply to the fn+f3 Switching the screen image Press fn+f4 to switch the screen image among display devices connected to the system. For example, if a monitor is connected to the computer, pressing fn+f4 alternates the screen image from computer display to monitor display to simultaneous display on both the computer and the monitor. Most external monitors receive video information from the computer using the external VGA video standard. The fn+f4 hotkey can also alternate images among other devices receiving video information from the computer. The following video transmission types, with examples of devices that use them, are supported by the fn+f4 hotkey:

LCD (computer display) External VGA (most external monitors) S-Video (televisions, camcorders, DVD players, VCRs, and video capture cards with S-Video-in jacks) HDMI (televisions, camcorders, DVD players, VCRs, and video capture cards with HDMI ports) Composite video (televisions, camcorders, DVD players, VCRs, and video capture cards with composite-video-in jacks) NOTE: Composite video devices can be connected to the system only by using an optional docking device. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using the keyboard 43 Viewing battery charge information Press fn+f8 to display charge information for all installed batteries. The display indicates which batteries are charging and reports the amount of charge remaining in each battery. Enabling/disabling the TouchPad (fn+f5) Press fn+f5 to enable or disable the TouchPad. Decreasing screen brightness Press fn+f9 to decrease screen brightness. Hold down the hotkey to decrease the brightness level incrementally. Increasing screen brightness Press fn+f10 to increase screen brightness. Hold down the hotkey to increase the brightness level incrementally. Activating the ambient light sensor Press fn+f11 to activate and deactivate the ambient light sensor. 44 Chapter 4 Pointing devices and keyboard Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using QuickLook (select models only) NOTE: QuickLook must be installed before you can view the QuickLook information. QuickLook saves Inbox e-mails and calendar, contact, and task information from Microsoft Outlook to your computer's hard drive. When the computer is off, in the Sleep state, or in Hibernation, you can quickly view this information by pressing the info button on the computer. NOTE:

you press the info button while the computer is off, in the Sleep state, or in Hibernation. If you have set a Windows logon password, you will be prompted to enter your password when NOTE: For additional information about QuickLook and setting preferences, refer to the online Help. Installing QuickLook To install QuickLook:

1. Select Start > All Programs > Software Setup. 2. Clear all check boxes. 3. Expand Optional Software Applications, and then select HP QuickLook. 4. Click Install. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using QuickLook (select models only) 45 Using HP Quick Launch Buttons The HP Quick Launch Buttons enable you to quickly open programs, files, or Web sites you use frequently. You can use the factory settings, which are described in the following table. Or you can reprogram the buttons by opening the Q Menu in the Quick Launch Buttons control panel. The Quick Launch Buttons include the QuickWeb button (1), and the QuickLook button (2) . The following table describes the factory settings for the Quick Launch Buttons. NOTE: Button functions vary, depending on the software installed on your computer. Component

(1) QuickWeb button

(2) QuickLook button Description

When the computer is off, press the button to open HP QuickWeb.

When the computer is on, press the button to open the default Web browser.

When the computer is off, press the button to open HP QuickLook .

When the computer is on, press the button to open Software Setup. NOTE:

browser opens. If Software Setup is not available, the default Web 46 Chapter 4 Pointing devices and keyboard Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Opening the Quick Launch Buttons control panel You can open the HP Quick Launch Buttons control panel in any of the following ways:

Select Start > Control Panel > Hardware and Sound > Quick Launch Buttons. Double-click the HP Quick Launch Buttons icon in the notification area, at the far right of the taskbar. Right-click the HP Quick Launch Buttons icon in the notification area, and click Adjust HP Quick Launch Buttons Properties. NOTE: On some models, an icon is displayed on the desktop. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Opening the Quick Launch Buttons control panel 47 Using HP QuickLook 3 QuickLook 3 allows you to save calendar, contact, inbox, and task information from Microsoft Outlook to the hard drive of your computer. Then, when the computer is off or in Hibernation, you can press the QuickLook button on the computer to view this information without waiting for the operating system to restart. Use QuickLook 3 to manage contact information, calendar events, e-mail information, and tasks without restarting your computer. NOTE: QuickLook 3 does not support the Sleep state in Windows. For more information about setting up and using QuickLook 3, refer to the QuickLook 3 software Help. Using the pen You can write with the pen in pen-specific programs such as the Tablet PC Input Panel, in all Microsoft Office applications, and in most other Windows programs and utilities. The information you write on the screen with the pen can be filed, searched, and shared among most Windows programs. Identifying the pen components The pen interacts with the tablet PC whenever the tip (1) or eraser (3) of the pen is approximately 1.27 cm (0.5 inch) from the screen. The pen button (2) emulates the functions of the right button on an external mouse. Holding the pen Hold the pen as if you were writing with a standard pen or pencil. Position the pen in your hand so that you will not accidentally press the pen button. As you monitor the movements of the pen, focus on the pointer, not on the tip of the pen. 48 Chapter 4 Pointing devices and keyboard Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Performing mouse clicks with the pen

To select an item on the screen as you would with the left button of an external mouse, tap the item with the tip of the pen.

To double-click an item on the screen as you would with the left button of an external mouse, tap the item twice with the tip of the pen.

To select an item as you would with the right button of an external mouse, press and hold down the pen button, and then tap the item with the tip of the pen. Performing other procedures with the pen In addition to emulating mouse clicks, the pen can be used for the following tasks:

To display the pointer location, hold the pen tip immediately over any location on the tablet PC screen without touching the screen with the pen tip. To display the menu options related to an item on the screen, tap the screen with the pen tip. To write with the pen, write on the screen with the tip of the pen. To press a pen-activated button, tap the button with the tip of the pen. To erase with the pen, hold the pen with the eraser side down and move the eraser over the writing that you want to delete. Pressure sensitivity The tablet PC pen is equipped with a pressure-sensitive feature. This means that you can manipulate the pen to create lines of various thickness, depending upon the amount of pressure you use to write. NOTE: This feature is available only if the Tablet PC Input Panel software is enabled. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using the pen 49 Calibrating the pen The pen can function at the default calibration or at a calibration set by another user. However, HP highly recommends that you use the pen only while it is calibrated to your personal handwriting and mouse action motions. Calibration optimizes pen performance for all users and particularly for left-handed users. To calibrate the pen:

1. 2. 3. Select Start > Control Panel > Hardware and Sound > Tablet PC Settings. At the bottom of the General tab, tap the Calibrate button. Follow the instructions on the screen.

Tap the pen in the exact center of each of the calibration markers. The calibration markers are displayed on the screen as plus signs (+). Be sure to calibrate the pen for use in both portrait and landscape orientations. NOTE: You can display information about any setting in the Tablet PC Settings window by selecting the Help button in the upper-right corner of the window, and then selecting a setting. Using the pen holder To remove the pen from the pen holder on the computer, press the pen in to eject it. To protect the pen when you are not using it, insert the pen, tip first, into the pen holder on the computer. 50 Chapter 4 Pointing devices and keyboard Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Setting pen preferences Pen preferences are set in the Tablet PC Settings window of the operating system. The preferences include setting the location of on-screen menus for either right-handed or left-handed users, calibrating the screen for pen use, and optimizing handwriting recognition. To access pen preferences:

Select Start > Control Panel > Hardware and Sound > Tablet PC Settings. Pen options are set in the Pen and Input Devices window. The options include speed settings for double-

tapping and pressandhold pen use, pen pointer options, and flick settings. To access pen options:

Select Start > Control Panel > Hardware and Sound > Pen and Input Devices. The preferences and options you set in the Tablet PC Settings and the Pen and Input Devices window are specific to the pen and the tablet PC. Pointing device preferences, such as pointer speed, click speed, and mouse trails, are set in the Mouse Properties window. These preferences apply to any pointing device in the system. To access Mouse Properties:

Select Start > Control Panel > Hardware and Sound > Mouse. Using the embedded numeric keypad Using the embedded numeric keypad The 15 keys of the embedded numeric keypad can be used like the keys on an external keypad. When the embedded numeric keypad is turned on, each key on the keypad performs the function indicated by the icon in the upper-right corner of the key. Enabling and disabling the embedded numeric keypad Press fn+num lk to enable the embedded numeric keypad. Press fn+num lk again to return the keys to their standard keyboard functions. NOTE: The embedded numeric keypad will not function while an external keyboard or numeric keypad is connected to the computer. Switching key functions on the embedded numeric keypad You can temporarily alternate the functions of keys on the embedded numeric keypad between their standard keyboard functions and their keypad functions by using the fn key or the fn+shift key combination.

To change the function of a keypad key to keypad functions while the keypad is off, press and hold the fn key while pressing the keypad key. To use the keypad keys temporarily as standard keys while the keypad is on:

Press and hold the fn key to type in lowercase. Press and hold fn+shift to type in uppercase. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using the embedded numeric keypad 51 Cleaning the TouchPad and keyboard Dirt and grease on the TouchPad can cause the pointer to jump around on the screen. To avoid this, clean the TouchPad with a damp cloth, and wash your hands frequently when using the computer. WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris. 52 Chapter 4 Pointing devices and keyboard Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

5 Multimedia Multimedia features Your computer includes multimedia features that allow you to listen to music, watch movies, and view pictures. Your computer may include the following multimedia components:

Optical drive for playing audio and video discs Integrated speakers for listening to music Integrated microphone for recording your own audio Integrated webcam that allows you to capture and share video Preinstalled multimedia software that allows you to play and manage your music, movies, and pictures Hotkeys that provide fast access to multimedia tasks

NOTE: Your computer may not include all of the components listed. The following sections explain how to identify and use the multimedia components included with your computer. Adjusting the volume You can adjust the volume using the following controls:

Computer volume buttons:

To mute or restore volume, press the mute button (1). To decrease volume, press and hold the volume down button (2) until the desired volume level is reached. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Multimedia features 53

To increase volume, press and hold the volume up button (3) until the desired volume level is reached.

Windows volume control:

a. Click the Speakers icon in the notification area, at the far right of the taskbar. b. Increase or decrease the volume by moving the slider up or down. Click the Mute Speakers icon to mute the volume. or a. Right-click the Speakers icon in the notification area, and then click Open Volume Mixer. b. In the Speakers column, you can increase or decrease the volume by moving the Volume slider up or down. You can also mute the volume by clicking the Mute Speakers icon. If the Speakers icon is not displayed in the notification area, follow these steps to add it:

a. Right-click the Show hidden icons icon (the arrow at far left of the notification area). b. Click Customize notification icons. c. Under Behaviors, select Show icon and notifications for the Volume icon. d. Click OK.

Program volume control:

Volume can also be adjusted within some programs. Multimedia software NOTE: To use optical discs (CDs and DVDs), you must use the optional HP 2740 Ultra-Slim Expansion Base or an optional external MultiBay with an optical drive. The computer includes preinstalled multimedia software. Some computer models also include additional multimedia software on an optical disc. 54 Chapter 5 Multimedia Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Depending on the hardware and software included with the computer, the following multimedia tasks may be supported:

Playing digital media, including audio and video CDs, audio and video DVDs, and Internet radio Creating or copying data CDs Creating, editing, and burning audio CDs Creating, editing, and burning a video or movie to a DVD or video CD

CAUTION: To prevent loss of information or damage to a disc, observe the following guidelines:

Before writing to a disc, connect the computer to a reliable external power source. Do not write to a disc while the computer is running on battery power. Before writing to a disc, close all open programs except the disc software you are using. Do not copy directly from a source disc to a destination disc or from a network drive to a destination disc. Instead, copy from a source disc or network drive to your hard drive, and then copy from your hard drive to the destination disc. Do not use the computer keyboard or move the computer while the computer is writing to a disc. The write process is sensitive to vibration. NOTE: For information about using software included with the computer, refer to the software manufacturer's instructions that may be provided on disc, as online Help files, or on the software manufacturer's Web site. Accessing your preinstalled multimedia software To access your preinstalled multimedia software:

Select Start > All Programs, and then open the multimedia program you want to use. NOTE: Some programs may be located in subfolders. NOTE: For details about using software included with the computer, refer to the software manufacturers instructions, which may be provided with the software, on disc, or on the manufacturers Web site. Installing your preloaded multimedia software To install your preloaded software from your hard drive, select Start > All Programs > HP Software Setup, and then follow the instructions on the screen. Installing multimedia software from a disc 1. Insert the disc into the optical drive. 2. When the installation wizard opens, follow the on-screen instructions. 3. Restart the computer if prompted to do so. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Multimedia software 55 Audio Your computer enables you to use a variety of audio features:

Play music using your computer speakers and/or connected external speakers Record sound using the internal microphone or connect an external microphone Download music from the Internet Create multimedia presentations using audio and images Transmit sound and images with instant messaging programs Stream radio programs (select models only) or receive FM radio signals Create or burn audio CDs (select models only) Connecting external audio devices WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety and Environmental Notices. To connect external devices such as external speakers, headphones, or a microphone, refer to the information provided with the device. For best results, remember the following tips:

Be sure that the device cable is securely connected to the correct jack on your computer. (Cable connectors are normally color-coded to match the corresponding jacks on the computer.) Be sure to install any drivers required by the external device. NOTE: A driver is a required program that acts like a translator between the device and the programs that use the device. Checking your audio functions To check the system sound on your computer, follow these steps:

1. Select Start > Control Panel. 2. Click Hardware and Sound. 3. Click Sound. 4. When the Sound window opens, click the Sounds tab. Under Program Events, select any sound event, such as a beep or alarm, and click the Test button. You should hear sound through the speakers or through connected headphones. To check the record functions of the computer, follow these steps:

1. Select Start > All Programs > Accessories > Sound Recorder. 2. Click Start Recording and speak into the microphone. Save the file to your desktop. 3. Open Windows Media Player and play back the sound. 56 Chapter 5 Multimedia Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

NOTE: For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. To confirm or change the audio settings on your computer, select Start > Control Panel > Hardware and Sound > Sound. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Audio 57 Video Your computer enables you to use a variety of video features:

Watch movies

Play games over the Internet Edit pictures and video to create presentations Connect external video devices Connecting an external monitor or projector Your computer has an external monitor port that allows you to connect external monitors and projectors. Using the external monitor port The external monitor port connects an external display device, such as an external monitor or a projector, to the computer.

To connect a display device, connect the device cable to the external monitor port. If a properly connected external display device does not display an image, press fn+f4 to NOTE:

transfer the image to the device. Repeatedly pressing fn+f4 alternates the screen image between the computer display and the device. Using the DreamColor display (select models only) Computer models with the HP DreamColor display include the preinstalled HP Mobile Display Assistant software. You can use this program to adjust display color settings such as preset color space, white point/color temperature, and luminance/brightness.

To access Mobile Display Assistant, click the Mobile Display Assistant icon in the notification area, at the far right of the taskbar or select Start > All Programs > Mobile Display Assistant. For more information on using Mobile Display Assistant, refer to the software Help. 58 Chapter 5 Multimedia Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Webcam NOTE: This section describes features that are common to most models. Some features may not be available on your computer. Your computer includes an integrated webcam, located at the top of the display. With the preinstalled software, you can use the webcam to take a photo, record a video, or make an audio recording. You can preview the photo, video recording, or audio recording, and save it on your computer hard drive. To access the webcam and HP Webcam software, select Start > All Programs > HP Webcam Application. The webcam software enables you to experiment with the following features:

VideoRecord and play back webcam video. AudioRecord and play back audio. Streaming videoUse with instant message software solutions that support UVC (Universal Video Class) cameras. SnapshotsTake still photos. HP Presto! Bizcard (select models only)Use to transform business cards into a usable database of contact information. Webcam tips For optimum performance, observe the following guidelines while using the webcam:

Be sure that you have the latest version of an instant message program before starting a video conversation. The webcam may not work properly across some network firewalls. If you are having trouble viewing or sending multimedia files to someone on another LAN NOTE:

or outside your network firewall, temporarily disable the firewall, perform the task you want to perform, and then reenable the firewall. To permanently resolve the problem, reconfigure the firewall as necessary, and adjust the policies and settings of other intrusion detection systems. For additional information, contact your network administrator or IT department.

Whenever possible, place bright light sources behind the webcam and out of the picture area. NOTE: For details about using your webcam, refer to the webcam software Help. Adjusting webcam properties You can adjust webcam properties using the Properties dialog box, which is accessible from various programs that use the integrated webcam, usually from a configuration, settings, or properties menu:

BrightnessControls the amount of light that is incorporated into the image. A higher brightness setting creates a brighter image; a lower brightness setting creates a darker image. ContrastControls the difference between lighter and darker areas on the image. A higher contrast setting intensifies the image; a lower contrast setting maintains more of the original informations dynamic range, but leads to a flatter image. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Webcam 59

HueControls the aspect of color that distinguishes it from another color (what makes a color red, green, or blue). Hue is distinct from saturation, which measures the intensity of the hue. SaturationControls the strength of color in the final image. A higher saturation setting creates a bolder image; a lower saturation setting creates a more subtle image. SharpnessControls the definition of edges in an image. A higher sharpness setting creates a more defined image; a lower sharpness setting creates a softer image. GammaControls the contrast affecting the mid-level grays or midtones of an image. Adjusting the gamma of an image allows you to change the brightness values of the middle range of gray tones without dramatically altering the shadows and highlights. A lower gamma setting makes grays look black, and makes dark colors even darker. For information about using the webcam, select Start > Help and Support. Capturing business card images You can use the webcam with the Presto! BizCard program to capture business card images and export the text to many types of address book software, such as Microsoft Outlook Contacts. To capture a business card image:

1. Open Presto! BizCard by selecting Start > All Programs > NewSoft > Presto! BizCard > Presto!

BizCard. 2. To capture one business card, select File > Snap One Card and Recognize. or To capture multiple business cards, select File > Snap Cards and Recognize. The Preview window opens. 3. Slowly lower the display (1) until the webcam light (2) stops blinking and you hear a sound. The webcam is now in focus. 60 Chapter 5 Multimedia Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

4. Insert a business card into the business card slot on the front of the computer (1) and slide the card to the right (2) to align it with the webcam. NOTE: Be sure that text on the bottom of the card is not obscured by the slot. If any text is obscured by the slot, rotate the card 180 degrees. The webcam captures the business card image and the webcam light turns off. 5. If you are capturing multiple business card images, remove the business card and insert another one. The webcam light turns on when the card is in focus. The webcam then captures the business card image and the webcam light turns off. Repeat this step for additional business cards. 6. When you have finished capturing one or more business card images, remove the business card from the slot and raise the display. 7. Review the data captured by Presto! BizCard to be sure that it is complete. For more information on using Presto! BizCard, refer to the software Help. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Webcam 61 6 Power management Setting power options Using power-saving states The computer has two power-saving states enabled at the factory: Sleep and Hibernation. When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory. Exiting Sleep is faster than exiting Hibernation. If the computer is in the Sleep state for an extended period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates Hibernation. When Hibernation is initiated, your work is saved to a hibernation file on the hard drive and the computer turns off. CAUTION: To prevent possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Sleep or Hibernation while reading from or writing to a disc or an external media card. NOTE: You cannot initiate any type of networking connection or perform any computer functions while the computer is in the Sleep state or in Hibernation. NOTE: When HP 3D DriveGuard has parked a drive, the computer will not initiate Sleep or Hibernation, and the display will be turned off. Initiating and exiting Sleep The system is set at the factory to initiate Sleep after 15 minutes of inactivity when running on battery power and 30 minutes of inactivity when running on external power. Power settings and timeouts can be changed using Power Options in Windows Control Panel. With the computer on, you can initiate Sleep in any of the following ways:

Press fn+f3. Click Start, and then click the Power button. Click Start, click the arrow next to the Lock button, and then click Sleep.

To exit Sleep:

Briefly slide the power switch to the right. When the computer exits Sleep, the power lights turn on and your work returns to the screen where you stopped working. 62 Chapter 6 Power management Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

NOTE:

Windows password before your work will return to the screen. If you have set a password to be required when the computer exits Sleep, you must enter your Initiating and exiting Hibernation The system is set at the factory to initiate Hibernation after 1080 minutes (18 hours) of inactivity when running on battery power, 1080 minutes (18 hours) of inactivity when running on external power, or when the battery reaches a critical battery level. Power settings and timeouts can be changed using Power Options in Windows Control Panel. To initiate Hibernation:

1. Click Start, and then click the arrow next to the Lock button. 2. Click Hibernate. To exit Hibernation:

Briefly slide the power switch to the right. The power lights turn on and your work returns to the screen where you stopped working. NOTE:

your Windows password before your work will return to the screen. If you have set a password to be required when the computer exits Hibernation, you must enter Using the battery meter The battery meter is located in the notification area, at the far right of the taskbar. The battery meter allows you to quickly access power settings, view remaining battery charge, and select a different power plan.

To display the percentage of remaining battery charge and the current power plan, move the pointer over the battery meter icon. To access Power Options, or to change the power plan, click the battery meter icon and select an item from the list. Different battery meter icons indicate whether the computer is running on battery or external power. The icon also displays a message if the battery has reached a critical battery level. To hide or display the battery meter icon:

1. Right-click the taskbar, and then click Properties. 2. Click the Notification Area tab. 3. Under System icons, clear the Power check box to hide the battery meter icon, or select the Power check box to display the battery meter icon. 4. Click OK. Using power plans A power plan is a collection of system settings that manages how the computer uses power. Power plans can help you conserve power or maximize performance. You can change power plan settings or create your own power plan. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Setting power options 63 Viewing the current power plan

Move the pointer over the battery meter icon in the notification area, at the far right of the taskbar. or Select Start > Control Panel > System and Maintenance > Power Options. Selecting a different power plan

Click the battery meter icon in the notification area, and then select a power plan from the list. or Select Start > Control Panel > System and Maintenance > Power Options, and then select a power plan from the list. Customizing power plans 1. Click the battery meter icon in the notification area and then click More power options. or Select Start > Control Panel > System and Maintenance > Power Options. 2. Select a power plan, and then click Change plan settings. 3. Change the Turn off the display and Put the computer to sleep timeout settings, as needed. 4. To change additional settings, click Change advanced power settings and make your changes. Setting password protection on wakeup To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow these steps:

1. 2. Select Start > Control Panel > System and Maintenance > Power Options. In the left pane, click Require a password on wakeup. 3. Click Change Settings that are currently unavailable. 4. Click Require a password (recommended). 5. Click Save changes. 64 Chapter 6 Power management Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using external AC power External AC power is supplied through one of the following devices:

WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.

Approved AC adapter Optional docking device

Connect the computer to external AC power under any of the following conditions:

WARNING! Do not charge the computer battery while you are onboard aircraft.

When you are charging or calibrating a battery

When you are installing or modifying system software

When you are writing information to a CD or DVD When you connect the computer to external AC power, the following events occur:

The battery begins to charge. If the computer is turned on, the battery meter icon in the notification area changes appearance.

When you disconnect external AC power, the following events occur:

The computer switches to battery power. The display brightness is automatically decreased to save battery life. To increase display brightness, press the fn+f10 hotkey or reconnect the AC adapter. Connecting the AC adapter WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. To connect the computer to external AC power:

1. 2. Plug the AC adapter into the power connector (1) on the computer. Plug the power cord into the AC adapter (2). Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using external AC power 65 3. Plug the other end of the power cord into an AC outlet (3). Using battery power When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. When the computer is plugged into external AC power, the computer runs on AC power. If the computer contains a charged battery and is running on external AC power supplied through the AC adapter, the computer switches to battery power if the AC adapter is disconnected from the computer. NOTE: The display brightness is decreased to save battery life when you disconnect AC power. To increase display brightness, use the fn+f10 hotkey or reconnect the AC adapter. You can keep a battery in the computer or in storage, depending on how you work. Keeping the battery in the computer whenever the computer is plugged into AC power charges the battery and also protects your work in case of a power outage. However, a battery in the computer slowly discharges when the computer is off and unplugged from external power. WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Computer battery life varies, depending on power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors. Finding battery information in Help and Support The Battery information section of the Help and Support Learning Center provides the following tools and information:

Battery Check tool to test battery performance Information on calibration, power management, and proper care and storage to maximize battery life Information on battery types, specifications, life cycles, and capacity

To access Battery information:

Select Start > Help and Support > Learning Center > Battery information. 66 Chapter 6 Power management Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using Battery Check Battery Check provides information on the status of the battery installed in the computer. To run Battery Check:

1. Connect the AC adapter to the computer. NOTE: The computer must be connected to external power for Battery Check to function properly. 2. Select Start > Help and Support > Troubleshoot > Power, Thermal and Mechanical, and then click the Power tab. Battery Check examines the battery and its cells to see if they are functioning properly, and then reports the results of the examination. Displaying the remaining battery charge

Move the pointer over the battery meter icon in the notification area, at the far right of the taskbar. or View the estimated number of minutes of battery charge remaining in Windows Mobility Center:

Click the battery meter icon, and then click Windows Mobility Center. or Select Start > Control Panel > Mobile PC > Windows Mobility Center. The time shown indicates the approximate running time remaining on the battery if the battery continues to provide power at the current level. For example, the time remaining will decrease when a DVD is playing and will increase when a DVD stops playing. Inserting or removing the battery CAUTION: Removing a battery that is the sole power source can cause loss of information. To prevent loss of information, save your work, and initiate Hibernation or shut down the computer through Windows before removing the battery. To insert the battery:

1. 2. Turn the computer upside down on a flat surface, with the battery bay toward you. Align the tabs (1) on the battery with the notches on the battery bay. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using battery power 67 3. Press the battery (2) into the battery bay until the battery clicks into place. To remove the battery:

1. 2. 3. Turn the computer upside down on a flat surface, with the battery bay toward you. Slide the battery release latch (1) to release the battery. Pivot the battery upward (2), and remove the battery from the computer (3). Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter, an optional power adapter, an optional expansion product, or an optional docking device. The battery charges whether the computer is off or in use, but it charges faster when the computer is off. Charging may take longer if a battery is new, has been unused for 2 weeks or more, or is much warmer or cooler than room temperature. 68 Chapter 6 Power management Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

To prolong battery life and optimize the accuracy of battery charge displays, follow these recommendations:

If you are charging a new battery, charge it fully before turning on the computer. Charge the battery until the battery light turns off. NOTE:

area may show 100 percent charge before the battery is fully charged. If the computer is on while the battery is charging, the battery meter in the notification Allow the battery to discharge below 5 percent of a full charge through normal use before charging it. If the battery has been unused for one month or more, calibrate the battery instead of simply charging it. The battery light displays charge status:

On: The battery is charging. Blinking: The battery has reached a low battery level or critical battery level and is not charging. Off: The battery is fully charged, in use, or not installed. Maximizing battery discharge time Battery discharge time varies, depending on the features you use while on battery power. Maximum discharge time gradually shortens as the battery storage capacity naturally degrades. Tips for maximizing battery discharge time:

Lower the brightness on the display. Check the Power saver setting in Power Options. Remove the battery from the computer when it is not being used or charged. Store the battery in a cool, dry location. Managing low battery levels The information in this section describes the alerts and system responses set at the factory. Some low-

battery alerts and system responses can be changed using Power Options in Windows Control Panel. Preferences set using Power Options do not affect lights. Identifying low battery levels When a battery that is the sole power source for the computer reaches a low battery level, the battery light blinks. If a low battery level is not resolved, the computer enters a critical battery level, and the battery light blinks rapidly. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using battery power 69 The computer takes the following actions for a critical battery level:

If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates Hibernation. If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly in the Sleep state, and then shuts down and loses any unsaved information. 70 Chapter 6 Power management Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Resolving a low battery level CAUTION: To reduce the risk of losing information when the computer reaches a critical battery level and has initiated Hibernation, do not restore power until the power lights turn off. Resolving a low battery level when external power is available

Connect one of the following devices:

AC adapter Optional expansion product or docking device Optional power adapter Resolving a low battery level when a charged battery is available 1. Turn off the computer or initiate Hibernation. 2. Remove the discharged battery, and then insert a charged battery. 3. Turn on the computer. Resolving a low battery level when no power source is available

Initiate Hibernation. or Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation When the computer lacks sufficient power to exit Hibernation, follow these steps:

1. 2. Insert a charged battery or plug the computer into external power. Exit Hibernation by briefly sliding the power switch to the right. Calibrating a battery Calibrate a battery under the following conditions:

When battery charge displays seem inaccurate

When you observe a significant change in battery run time Even if a battery is heavily used, it should not need to be calibrated more than once a month. It is also not necessary to calibrate a new battery. Step 1: Fully charge the battery WARNING! Do not charge the computer battery while you are onboard aircraft. NOTE: The battery charges whether the computer is off or in use, but it charges faster when the computer is off. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using battery power 71 To fully charge the battery:

1. Insert the battery into the computer. 2. Connect the computer to an AC adapter, optional power adapter, optional expansion product, or optional docking device, and then plug the adapter or device into external power. The battery light on the computer turns on. 3. Leave the computer plugged into external power until the battery is fully charged. The battery light on the computer turns off. Step 2: Disable Hibernation and Sleep 1. Click the battery meter icon in the notification area, and then click More power options. or Select Start > Control Panel > System and Security > Power Options. 2. Under the current power plan, click Change plan settings. 3. Record the Turn off the display and Put the computer to sleep settings listed in the On battery column so that you can reset them after the calibration. 4. Change the Turn off the display and Put the computer to sleep settings to Never. 5. Click Change advanced power settings. 6. Click the plus sign (+) next to Sleep, and then click the plus sign (+) next to Hibernate after. 7. Record the On battery setting under Hibernate after so that you can reset it after the calibration. 8. Change the On battery setting to Never. 9. Click OK. 10. Click Save changes. Step 3: Discharge the battery The computer must remain on while the battery is being discharged. The battery can discharge whether or not you are using the computer, but the battery will discharge faster while you are using it.

If you plan to leave the computer unattended during the discharge, save your information before beginning the discharge procedure. If you use the computer occasionally during the discharge procedure and have set energy-saving timeouts, expect the following performance from the system during the discharge process:

The monitor will not turn off automatically. Hard drive speed will not decrease automatically when the computer is idle. System-initiated Hibernation will not occur. 72 Chapter 6 Power management Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

To discharge a battery:

1. Unplug the computer from its external power source, but do not turn off the computer. 2. Run the computer on battery power until the battery is discharged. The battery light begins to blink when the battery has discharged to a low battery level. When the battery is discharged, the battery light turns off and the computer shuts down. Step 4: Fully recharge the battery To recharge the battery:

1. 2. Plug the computer into external power and maintain external power until the battery is fully recharged. When the battery is recharged, the battery light on the computer turns off. You can use the computer while the battery is recharging, but the battery will charge faster if the computer is off. If the computer is off, turn it on when the battery is fully charged and the battery light has turned off. Step 5: Reenable Hibernation and Sleep CAUTION: Failure to reenable Hibernation after calibration may result in a full battery discharge and information loss if the computer reaches a critical battery level. 1. Click the battery meter icon in the notification area, and then click More power options. or Select Start > Control Panel > System and Security > Power Options. 2. Under the current power plan, click Change plan settings. 3. Reenter the settings that you recorded for the items in the On battery column. or Click Restore default settings for this plan, and then follow the on-screen instructions. NOTE:

If you restore default settings, omit steps 4 through 8. 4. Click Change advanced power settings. 5. Click the plus sign (+) next to Sleep, and then click the plus sign (+) next to Hibernate after. 6. Reenter the setting that you recorded for On battery. 7. Click OK. 8. Click Save changes. Conserving battery power

Select low power-use settings through Power Options in Windows Control Panel. Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using battery power 73

Disconnect external devices that are not plugged into an external power source, when you are not using them. Stop, disable, or remove any external media cards that you are not using. Use the fn+f9 and fn+f10 hotkeys to adjust screen brightness as needed. If you leave your work, initiate Sleep or Hibernation, or shut down the computer. Storing a battery CAUTION: To prevent damage to a battery, do not expose it to high temperatures for extended periods of time. If a computer will be unused and unplugged from external power for more than two weeks, remove the battery and store it separately. To prolong the charge of a stored battery, place it in a cool, dry place. NOTE: A stored battery should be checked every six months. If the capacity is less than 50 percent, recharge the battery before returning it to storage. Calibrate a battery before using it if it has been stored for one month or more. Disposing of a used battery WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery; short the external contacts on a battery; or dispose of a battery in fire or water. Do not expose a battery to temperatures above 60C (140F). Replace the battery only with a battery approved for this computer. Refer to the Regulatory, Safety and Environmental Notices for battery disposal information. Replacing the battery Computer battery life varies, depending on the power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors. Battery Check notifies you to replace the battery when an internal cell is not charging properly, or when the battery storage capacity has reached a weak condition. A message refers you to the HP Web site for more information about ordering a replacement battery. If the battery is possibly covered by an HP warranty, instructions include a warranty ID. NOTE: To ensure that you always have battery power when you need it, HP recommends purchasing a new battery when the storage capacity indicator turns green-yellow. 74 Chapter 6 Power management Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Testing an AC adapter Test the AC adapter if the computer exhibits any of the following symptoms:

The computer will not turn on when connected to the AC adapter. The display does not turn on when the computer is connected to the AC adapter and external power. The power light is off when the computer is connected to the AC adapter.

To test the AC adapter:

1. Remove the battery from the computer. 2. Connect the AC adapter to the computer and to an AC outlet. 3. Turn on the computer.

If the power light turns on, the AC adapter is functioning properly. If the power light remains off, the AC adapter is not functioning and should be replaced.

Contact technical support for information on obtaining a replacement AC power adapter. Select Start > Help and Support > Get assistance. Shutting down the computer CAUTION: Unsaved information will be lost when the computer is shut down. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer. Shut down the computer under any of the following conditions:

When you need to replace the battery or access components inside the computer

When you are connecting an external hardware device that does not connect to a USB port

When the computer will be unused and disconnected from external power for an extended period Although you can shut down the computer with the power switch, the recommended procedure is to use the Windows Shut down command. To shut down the computer, follow these steps:

NOTE:

before shutdown is possible. If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or Hibernation 1. Save your work and close all open programs. 2. Click Start. 3. Click Shut down. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Testing an AC adapter 75 If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:

Slide the power switch to the right and hold it for at least 5 seconds. Disconnect the computer from external power and remove the battery. 76 Chapter 6 Power management Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

7 Drives Identifying installed drives Your computer includes a hard drive (with a rotating disc) or a solid-state drive (SSD) with solid-state memory. Because it has no moving parts, an SSD does not generate as much heat as a hard drive. To view the drives installed on the computer, select Start > Computer. NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing applications, running utilities, or changing Windows settings. Refer to Help and Support for more information. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Identifying installed drives 77 Handling drives Drives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply. CAUTION: To reduce the risk of damage to the computer, damage to a drive, or loss of information, observe these precautions:

Before you move a computer or external hard drive from one location, initiate Sleep, and allow the screen to clear. Before handling a drive, discharge static electricity by touching the unpainted metal surface of the drive. Do not touch the connector pins on a removable drive or on the computer. Handle a drive carefully; do not drop a drive or place items on it. Before removing or inserting a drive, shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on and then shut it down through the operating system. Do not use excessive force when inserting a drive into a drive bay. Do not type on the keyboard or move the computer while the optical drive is writing to a disc. The write process is sensitive to vibration. When the battery is the only source of power, be sure that the battery is sufficiently charged before writing to media. Avoid exposing a drive to temperature or humidity extremes. Avoid exposing a drive to liquids. Do not spray the drive with cleaning products. Remove media from a drive before removing the drive from the drive bay, or traveling with, shipping, or storing a drive. If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective packaging and label the package FRAGILE. Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-

through devices and security wands. The airport security devices that check carry-on luggage, such as conveyor belts, use X-rays instead of magnetism and will not damage a drive. 78 Chapter 7 Drives Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Improving hard drive performance Using Disk Defragmenter As you use the computer, files on the hard drive become fragmented. Disk Defragmenter consolidates the fragmented files and folders on the hard drive so that the system can run more efficiently. After you start Disk Defragmenter, it works without supervision. Depending on the size of your hard drive and the number of fragmented files, Disk Defragmenter may take more than an hour to complete. You may want to set it to run during the night or another time when you do not need access to your computer. HP recommends defragmenting your hard drive at least once a month. You may set Disk Defragmenter to run on a monthly schedule, but you can defragment your computer manually at any time. To run Disk Defragmenter:

1. Select Start > All Programs > Accessories > System Tools > Disk Defragmenter. 2. Click Defragment disk. NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. Refer to Help and Support for more information. For additional information, access the Disk Defragmenter software Help. Using Disk Cleanup Disk Cleanup searches the hard drive for unnecessary files that you can safely delete to free up disk space and help the computer to run more efficiently. To run Disk Cleanup:

1. 2. Select Start > All Programs > Accessories > System Tools > Disk Cleanup. Follow the on-screen instructions. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Improving hard drive performance 79 Using HP 3D DriveGuard HP 3D DriveGuard protects the hard drive by parking the drive and halting I/O requests under either of the following conditions:

You drop the computer. You move the computer with the display closed while the computer is running on battery power.

A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal operation. If the upgrade bay contains a hard drive, the hard drive is protected by HP 3D DriveGuard. NOTE:

Hard drives installed in optional docking devices or connected to USB ports are not protected by HP 3D DriveGuard. Because solid-state drives lack rotating parts, protection by HP 3D DriveGuard is unnecessary. For more information, refer to the HP 3D DriveGuard software Help. Identifying HP 3D DriveGuard status The drive light on the computer changes to an amber color to show that the drive is parked. To determine whether drives are currently protected or whether a drive is parked, select Start > Control Panel >

Hardware and Sound > Windows Mobility Center:

If the software is enabled, a green check mark is superimposed over the hard drive icon. If the software is disabled, a white diagonal line is superimposed over the hard drive icon. If the drives are parked, a yellow moon is superimposed over the hard drive icon.

NOTE: The icon in the Mobility Center may not show the most up-to-date status for the drive. For immediate updates after a change in status, you need to enable the notification area icon. To enable the notification area icon:

1. Select Start > Control Panel > Hardware and Sound > HP 3D DriveGuard. NOTE:

If prompted by User Account Control, click Yes. 2. On the Icon in system tray row, click Show. 3. Click OK. If HP 3D DriveGuard has parked the drive, the computer will behave in the following ways:

The computer will not shut down. The computer will not initiate Sleep or Hibernation, except as described in the following Note. NOTE:

DriveGuard allows the computer to initiate Hibernation. If the computer is running on battery power and reaches a critical battery level, HP 3D Before you move the computer, HP recommends that you either shut it down, or initiate Sleep or Hibernation. 80 Chapter 7 Drives Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using HP 3D DriveGuard software The HP 3D DriveGuard software enables you to perform the following tasks:

Enable and disable HP 3D DriveGuard. NOTE: Permission to enable or disable HP 3D DriveGuard is dependent on certain user privileges. Members of an Administrator group can change privileges for non-Administrator users. Determine whether a drive in the system is supported.

To open the software and change settings, follow these steps:

1. In Mobility Center, click the hard drive icon to open the HP 3D DriveGuard window. or Select Start > Control Panel > Hardware and Sound > HP 3D DriveGuard. NOTE:

If prompted by User Account Control, click Yes. 2. Click the appropriate button to change settings. 3. Click OK. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using HP 3D DriveGuard 81 Replacing the hard drive in the hard drive bay CAUTION: To prevent information loss or an unresponsive system:

Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch to the right. Then shut down the computer through the operating system. To remove a hard drive:

1. 2. Save your work. Shut down the computer and close the display. 3. Disconnect all external hardware devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the hard drive bay toward you. 6. Remove the battery from the computer. 7. Loosen the 3 hard drive cover screws (1). 8. Remove the hard drive cover (2). 9. Remove the 2 hard drive bracket screws (1). 82 Chapter 7 Drives Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

10. Remove the hard drive bracket (2). 11. Grasp the mylar tab on the hard drive and pull upward (1) until the hard drive is at a 45-degree angle. 12. With the hard drive at a 45-degree angle, pull it forward (2) until the rear of the hard drive is clear of the computer back edge. 13. Lift the hard drive (3) out of the hard drive bay. To install a hard drive:

1. Insert the rear of the hard drive at a 45-degree angle into the back of the hard drive bay (1). Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Replacing the hard drive in the hard drive bay 83 2. Lower the front of the hard drive down onto the system board connector (2), and then press down

(3) to connect the hard drive. 3. Replace the hard drive bracket (1). 4. Replace the 2 hard drive bracket screws (2). 5. Align the tabs (1) on the hard drive cover with the notches on the computer. 6. Close the cover (2). 84 Chapter 7 Drives Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

7. Tighten the 3 hard drive cover screws (3). 8. Replace the battery. 9. Turn the computer right-side up, and then reconnect external power and external devices. 10. Turn on the computer. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Replacing the hard drive in the hard drive bay 85 8 External devices Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions. Your computer model has 3 USB ports, which support USB 1.0, USB 1.1, and USB 2.0 devices. A USB hub provides additional USB ports that can be used with the computer. Connecting a USB device CAUTION: To prevent damage to a USB connector, use minimal force to connect a USB device.

To connect a USB device to the computer, connect the USB cable for the device to the USB port. You will hear a sound when the device has been detected. NOTE: The first time you connect a USB device, a message is displayed in the notification area to let you know the device is recognized by the computer. Stopping and removing a USB device CAUTION: To prevent loss of information or an unresponsive system, stop a USB device before removing it. 86 Chapter 8 External devices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

CAUTION: To prevent damage to a USB connector, do not pull on the cable to remove the USB device. To stop and remove a USB device:

1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar. NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon (< or

<<) in the notification area. 2. Click the name of the device in the list. NOTE:

If the USB device is not listed, you do not have to stop the device before you remove it. 3. Click Stop, and then click OK. 4. Remove the device. Using USB legacy support USB legacy support (enabled at the factory) permits the following actions:

Using a USB keyboard, mouse, or hub connected to a USB port on the computer during startup or in an MS-DOS-based program or utility Starting or restarting from an optional external MultiBay or an optional USB bootable device

To disable or reenable USB legacy support in Computer Setup, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter the BIOS Setup. 3. Use a pointing device or the arrow keys to select System Configuration, and then select Device Configurations. 4. 5. To disable USB legacy support, click Disabled next to USB legacy support. To reenable USB legacy support, click Enabled next to USB legacy support. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then follow the on-screen instructions. Your changes go into effect when the computer restarts. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using a USB device 87 Using a 1394 device IEEE 1394 is a hardware interface that connects a high-speed multimedia or data storage device to the computer. Scanners, digital cameras, and digital camcorders often require a 1394 connection. Some 1394 devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions. The 1394 port also supports IEEE 1394a devices. Connecting a 1394 device CAUTION: To prevent damage to a 1394 port connector, use minimal force when connecting a 1394 device.

To connect a 1394 device to the computer, connect the 1394 cable for the device to the 1394 port. You will hear a sound when the device has been detected. Stopping and removing a 1394 device CAUTION: To prevent loss of information or an unresponsive system, stop the 1394 device before removing it. CAUTION: To prevent damage to a 1394 connector, do not pull on the cable to remove the 1394 device. 1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar. NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon (< or

<<) in the notification area. 2. Click the name of the device in the list. NOTE:

If the device is not listed, you do not have to stop the device before you remove it. 3. Click Stop, and then click OK. 4. Remove the device. 88 Chapter 8 External devices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using external drives Removable external drives expand your options for storing and accessing information. A USB drive can be added by connecting the drive to a USB port on the computer. USB drives include the following types:

1.44-megabyte diskette drive Hard drive module (a hard drive with an adapter attached) DVD-ROM Drive DVD/CD-RW Combo Drive DVDRW/CD-RW Combo Drive Using optional external devices NOTE: For more information about required software and drivers, or to learn which computer port to use, refer to the manufacturer's instructions. To connect an external device to the computer:

CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be sure that the device is turned off and the AC power cord is unplugged. 1. Connect the device to the computer. 2. 3. If you are connecting a powered device, plug the device power cord into a grounded AC outlet. Turn on the device. To disconnect an unpowered external device, turn off the device, and then disconnect it from the computer. To disconnect a powered external device, turn off the device, disconnect it from the computer, and then unplug the AC power cord. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using external drives 89 Using the docking connector The docking connector connects the computer to an optional docking device. An optional docking device provides additional ports and connectors that can be used with the computer. 90 Chapter 8 External devices Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

9 External media cards Using Media Card Reader cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital mediaequipped cameras and PDAs as well as with other computers. The Digital Media Slot supports the following digital card formats:

Memory Stick (MS)

Memory Stick Pro (MSP)

MultiMediaCard (MMC)

Secure Digital Input/Output (SD I/O) Secure Digital (SD) Memory Card xD-Picture Card (XD) xD-Picture Card (XD) Type H xD-Picture Card (XD) Type M Inserting a digital card CAUTION: To avoid damaging the digital card or the computer, do not insert any type of adapter into the SD Card Reader. CAUTION: To prevent damage to the digital card connectors, use minimal force to insert a digital card. 1. Hold the digital card label-side up, with the connectors facing the computer. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using Media Card Reader cards 91 2. Insert the card into the Media Card Reader, and then push in on the card until it is firmly seated. You will hear a sound when the device has been detected, and a menu of available options may be displayed. Stopping and removing a digital card CAUTION: To prevent loss of data or an unresponsive system, stop a digital card before removing it. 1. Save your information and close all programs associated with the digital card. NOTE: To stop a data transfer, click Cancel in the operating system Copying window. 2. Stop the digital card:

a. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar. NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon

(< or <<) in the notification area. b. Click the name of the digital card in the list. c. Click Stop, and then click OK. 3. Press in on the digital card (1), and then remove the card from the slot (2). 92 Chapter 9 External media cards Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using ExpressCards (select models only) An ExpressCard is a high-performance PC Card that is inserted into the ExpressCard slot. Like standard PC Cards, ExpressCards are designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). Configuring an ExpressCard Install only the software required for your device. If you are instructed by the ExpressCard manufacturer to install device drivers:

Install only the device drivers for your operating system. Do not install other software, such as card services, socket services, or enablers, supplied by the ExpressCard manufacturer. Inserting an ExpressCard CAUTION: To prevent damage to the computer and external media cards, do not insert a PC Card into an ExpressCard slot. CAUTION: To prevent damage to the connectors:

Use minimal force when inserting an ExpressCard. Do not move or transport the computer when an ExpressCard is in use. The ExpressCard slot may contain a protective insert. To remove the insert:

1. 2. Press in on the insert (1) to unlock it. Pull the insert out of the slot (2). To insert an ExpressCard:

1. Hold the card label-side up, with the connectors facing the computer. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using ExpressCards (select models only) 93 2. Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated. You will hear a sound when the device has been detected, and a menu of options may be displayed. NOTE: The first time you insert an ExpressCard, a message is displayed in the notification area to let you know the device is recognized by the computer. NOTE: An inserted ExpressCard uses power even when idle. To conserve power, stop or remove an ExpressCard when it is not in use. Stopping and removing an ExpressCard CAUTION: To prevent loss of data or an unresponsive system, stop an ExpressCard before removing it. 1. Save your information and close all programs associated with the ExpressCard. NOTE: To stop a data transfer, click Cancel in the operating system Copying window. 2. Stop the ExpressCard:

a. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar. NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon

(< or <<) in the notification area. b. Click the name of the ExpressCard in the list. c. Click Stop, and then click OK. 3. Release and remove the ExpressCard:

a. Gently press in on the ExpressCard (1) to unlock it. b. Pull the ExpressCard out of the slot (2). 94 Chapter 9 External media cards Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using ExpressCards (select models only) 95 Using Smart Cards (select models only) NOTE: The term smart card is used throughout this chapter to refer to both smart cards and Java Cards. A smart card is a credit cardsized accessory that carries a microchip containing memory and a microprocessor. Like personal computers, smart cards have an operating system to manage input and output, and they include security features to protect against tampering. Industry-standard smart cards are used with the smart card reader (select models only). A PIN is needed to gain access to the contents of the microchip. For more information about smart card security features, refer to Help and Support. NOTE: Your computer may look slightly different from the illustrations in this chapter. Inserting a smart card To insert a smart card:

1. Holding the smart card label-side up, gently slide the card into the smart card reader until the card is seated. 2. Follow the on-screen instructions for logging on to the computer using the smart card PIN. Removing a smart card To remove a smart card:

Grasp the edge of the smart card, and pull it out of the smart card reader. 96 Chapter 9 External media cards Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

10 Memory modules The computer has one memory module compartment located on the bottom of the computer. The memory capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, touch a grounded metal object to be sure that you are discharged of static electricity. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

97 Adding or replacing a memory module To add or replace a memory module in the memory module slot, follow these steps:

1. 2. Save your work. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding the power switch to the right. Then shut down the computer through the operating system. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove all batteries from the computer. 7. 8. Loosen the 3 hard drive compartment cover screws (1). Lift the hard drive compartment cover away from the computer (2). 9. If you are replacing a memory module, remove the existing memory module:

a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. 98 Chapter 10 Memory modules Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 10. Insert a memory module:

NOTE:

that you insert the memory module into the primary memory module slot. If you are inserting a memory module and both memory module slots are vacant, be sure a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module and do not bend the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 11. Align the tabs (1) on the hard drive compartment cover with the notches on the computer. Adding or replacing a memory module 99 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

12. Close the cover (2). 13. Tighten the 3 hard drive compartment cover screws (3). 14. Replace the batteries. 15. Turn the computer right-side up, and then reconnect external power and external devices. 16. Turn on the computer. 100 Chapter 10 Memory modules Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

11 Security Protecting the computer NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. NOTE: Your computer supports CompuTrace, which is an online security-based tracking and recovery service available in select regions. If the computer is stolen, CompuTrace can track the computer if the unauthorized user accesses the Internet. You must purchase the software and subscribe to the service in order to use CompuTrace. For information about ordering the CompuTrace software, go to the HP Web site at http://www.hpshopping.com. Security features provided with your computer can protect the computer, personal information, and data from a variety of risks. The way you use your computer will determine which security features you need to use. The Windows operating system offers certain security features. Additional security features are listed in the following table. Most of these additional security features can be configured in the Computer Setup utility (referred to hereafter as Computer Setup). To protect against Unauthorized use of the computer Use this security feature HP ProtectTools Security Manager, in combination with a password, smart card, and/or fingerprint reader Unauthorized access to Computer Setup (f10) BIOS administrator password in Computer Setup*

Unauthorized access to the contents of a hard drive DriveLock password in Computer Setup*

Unauthorized startup from an optical drive, diskette drive, or internal network adapter Boot options feature in Computer Setup*

Unauthorized access to a Windows user account HP ProtectTools Security Manager Unauthorized access to data Unauthorized access to Computer Setup settings and other system identification information

Firewall software

Windows updates

Drive encryption for HP ProtectTools BIOS administrator password in Computer Setup*

Unauthorized removal of the computer Security cable slot (used with an optional security cable)

*Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the keyboard to navigate and make selections in Computer Setup. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Protecting the computer 101 Using passwords Most security features use passwords. Whenever you set a password, write down the password and store it in a secure location away from the computer. Note the following password considerations:

Setup and DriveLock passwords are set in Computer Setup and are managed by the system BIOS. The embedded security password, which is an HP ProtectTools Security Manager password, can be enabled in Computer Setup to provide BIOS password protection in addition to their normal HP ProtectTools functions. The embedded security password is used with the optional embedded security chip.

Windows passwords are set only in the Windows operating system.

If you forget the BIOS administrator password set in Computer Setup, you can use HP SpareKey to access the utility. If you forget both the DriveLock user password and the DriveLock master password set in Computer Setup, the hard drive that is protected by the passwords is permanently locked and can no longer be used. You can use the same password for a Computer Setup feature and for a Windows security feature. You can also use the same password for more than one Computer Setup feature. Use the following tips for creating and saving passwords:

When creating passwords, follow requirements set by the program.

Write down your passwords and store them in a secure place away from the computer. Do not store passwords in a file on the computer.

The following tables list commonly used Windows and BIOS administrator passwords and describe their functions. Setting passwords in Windows Windows passwords Administrator password*

User password*

Function Protects access to a Windows administrator-level account. Protects access to a Windows user account.

*For information about setting a Windows administrator password or a Windows user password, select Start > Help and Support. Setting passwords in Computer Setup BIOS administrator passwords Function BIOS administrator password DriveLock master password Protects access to Computer Setup. Protects access to the internal hard drive that is protected by DriveLock. It is also used to remove DriveLock protection. This password is set under DriveLock Passwords during the enable process. 102 Chapter 11 Security Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

BIOS administrator passwords Function DriveLock user password TPM embedded security password Protects access to the internal hard drive that is protected by DriveLock, and is set under DriveLock Passwords during the enable process. When enabled as a BIOS administrator password, protects access to the computer contents when the computer turns on, restarts, or exits Hibernation. This password requires the optional embedded security chip to support this security feature. BIOS administrator password The Computer Setup BIOS administrator password protects the configuration settings and system identification information in Computer Setup. After this password is set, it must be entered to access Computer Setup and to make changes using Computer Setup. Note the following characteristics of the BIOS administrator password:

It is not interchangeable with a Windows administrator password, although both passwords can be identical. It is not displayed as it is set, entered, changed, or deleted. It must be set and entered with the same keys. For example, a BIOS administrator password set with keyboard number keys will not be recognized if you enter it thereafter with embedded numeric keypad number keys. It can include any combination of up to 32 letters and numbers and is not case sensitive unless mandated by the administrator. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using passwords 103 Managing a BIOS administrator password A BIOS administrator password is set, changed, and deleted in Computer Setup. To set or change this password in Computer Setup, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select Security > Change Password, and then press enter. 4. When prompted, type your current password. 5. When prompted, type your new password. 6. When prompted, type your new password again to confirm. 7. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. To delete this password in Computer Setup, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select Security > Change Password, and then press enter. 4. When prompted, type your current password. 5. When prompted for the new password, leave the field empty, and then press enter. 6. Read the warning. To continue, select YES. 7. When prompted to type your new password again, leave the field empty, and then press enter. 8. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. 104 Chapter 11 Security Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Entering a BIOS administrator password At the BIOS administrator password prompt, type your password (using the same kind of keys you used to set the password), and then press enter. After three unsuccessful attempts to enter the BIOS administrator password, you must restart the computer and try again. Using Computer Setup DriveLock CAUTION: To prevent the DriveLock-protected hard drive from becoming permanently unusable, record the DriveLock user password and the DriveLock master password in a safe place away from your computer. If you forget both DriveLock passwords, the hard drive will be permanently locked and can no longer be used. DriveLock protection prevents unauthorized access to the contents of a hard drive. DriveLock can be applied only to the internal hard drive(s) of the computer. After DriveLock protection is applied to a drive, a password must be entered to access the drive. The drive must be inserted into the computer or an advanced port replicator in order for it to be accessed by the DriveLock passwords. To apply DriveLock protection to an internal hard drive, a user password and a master password must be set in Computer Setup. Note the following considerations about using DriveLock protection:

After DriveLock protection is applied to a hard drive, the hard drive can be accessed only by entering either the user password or the master password. The owner of the user password should be the day-to-day user of the protected hard drive. The owner of the master password may be either a system administrator or the day-to-day user. The user password and the master password can be identical. You can delete a user password or master password only by removing DriveLock protection from the drive. DriveLock protection can be removed from the drive only with the master password. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using passwords 105 Setting a DriveLock password To set a DriveLock password in Computer Setup, follow these steps:

1. 2. Turn on the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select Security > DriveLock passwords, and then press enter. 4. Use a pointing device to click the hard drive you want to protect. or Use the arrow keys to select the hard drive you want to protect, and then press enter. 5. Read the warning. To continue, select YES. 6. 7. 8. 9. Type your master password in the New password and Verify new password fields, and then press enter. Type your user password in the New password and Verify new password fields, and then press enter. To confirm DriveLock protection on the drive you have selected, type DriveLock in the confirmation field, and then press enter. NOTE: The DriveLock confirmation is case sensitive. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. Entering a DriveLock password Be sure that the hard drive is inserted into the computer (not into an optional docking device or external MultiBay). At the DriveLock Password prompt, type your user or master password (using the same kind of keys you used to set the password), and then press enter. After two incorrect attempts to enter the password, you must shut down the computer and try again. Changing a DriveLock password To change a DriveLock password in Computer Setup, follow these steps:

1. 2. Turn on the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 106 Chapter 11 Security Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

3. Use a pointing device or the arrow keys to select Security > DriveLock passwords, and then press enter. 4. Use a pointing device to select an internal hard drive. or Use the arrow keys to select an internal hard drive, and then press enter. 5. Use a pointing device or the arrow keys to select the password you want to change. 6. 7. Type your current password in the Old password field, type a new password in the New password and Verify new password fields, and then press enter. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. Removing DriveLock protection To remove DriveLock protection in Computer Setup, follow these steps:

1. 2. Turn on the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select Security > DriveLock password, and then press enter. 4. Use a pointing device or the arrow keys to select an internal hard drive, and then press enter. 5. Use a pointing device or the arrow keys to select Disable protection. 6. 7. Type your master password, and then press enter. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. Using Computer Setup Auto DriveLock In a multiple-user environment, you can set an Automatic DriveLock password. When the Automatic DriveLock password is enabled, a random user password and a DriveLock master password will be created for you. When any user passes the password credential, the same random user and DriveLock master password will be used to unlock the drive. NOTE: You must have a BIOS administrator password before you can access the Automatic DriveLock features. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using passwords 107 Entering an Automatic DriveLock password To enable an Automatic DriveLock password in Computer Setup, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select Security > Automatic DriveLock, and then press enter. 4. Use a pointing device or the arrow keys to select an internal hard drive, and then press enter. 5. Read the warning. To continue, select YES. 6. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Removing Automatic DriveLock protection To remove DriveLock protection in Computer Setup, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select Security > Automatic DriveLock, and then press enter. 4. Use a pointing device or the arrow keys to select an internal hard drive, and then press enter. 5. Use a pointing device or the arrow keys to select Disable protection. 6. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. 108 Chapter 11 Security Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using Computer Setup security features Securing system devices You can disable or enable system devices from the following menus in Computer Setup:

Boot Options Device Configurations Built-In Device Options Port Options

To disable or reenable system devices in Computer Setup, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select System Configuration > Boot Options, or System Configuration > Device Configurations or, System Configuration > Built-In Device Options, or System Configuration > Port Options. 4. 5. Press enter. To disable an option, use a pointing device to click Disabled next to the option. or Use the arrow keys to select Disabled next to the option, and then press enter. 6. To reenable an option, use a pointing device to click Enabled next to the option. or Use the arrow keys to select Enabled next to the option, and then press enter. 7. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. Viewing Computer Setup System Information The System Information feature in Computer Setup provides two types of system information:

Identification information about the computer model and the batteries Specification information about the processor, cache, memory, ROM, video revision, and keyboard controller revision Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using Computer Setup security features 109 To view this general system information in Computer Setup, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select File > System Information, and then press enter. NOTE: To prevent unauthorized access to this information, you must create a BIOS administrator password in Computer Setup. Using Computer Setup System IDs The System IDs feature in Computer Setup allows you to display or enter the computer asset tag and ownership tag. NOTE: To prevent unauthorized access to this information, you must create a BIOS administrator password in Computer Setup. To manage this feature in Computer Setup, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select Security > System IDs, and then press enter. 4. Use a pointing device or the arrow keys to select Notebook Asset Tag or Notebook Ownership Tag, and then enter the information. 5. 6. Press enter when finished. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. 110 Chapter 11 Security Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using antivirus software When you use the computer to access e-mail, a network, or the Internet, you expose the computer to computer viruses. Computer viruses can disable the operating system, programs, or utilities, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. McAfee Total Protection antivirus software is either preinstalled or preloaded on the computer. If the antivirus software is preinstalled, select Start > All Programs > McAfee > Managed Services > Total Protection. If the software is preloaded, select Start > All Programs > HP Software Setup, and then follow the instructions on the screen to load the McAfee Total Protection software. For more information about computer viruses, type viruses in the Search box in Help and Support. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using antivirus software 111 Using firewall software When you use the computer to access e-mail, a network, or the Internet, unauthorized persons may be able to gain access to the computer, your personal files, and information about you. Use the firewall software preinstalled on the computer to protect your privacy. McAfee Total Protection antivirus software is preinstalled on the computer. To access your software, select Start > All Programs > McAfee >

Managing Services > Total Protection. Firewall features include logging and reporting of network activity, and automatic monitoring of all incoming and outgoing traffic. For more information, refer to the software manufacturers instructions. These instructions may be provided with the software, on disc, or on the manufacturers Web site. NOTE: Under some circumstances a firewall can block access to Internet games, interfere with printer or file sharing on a network, or block authorized e-mail attachments. To temporarily resolve the problem, disable the firewall, perform the task that you want to perform, and then reenable the firewall. To permanently resolve the problem, reconfigure the firewall as necessary, and adjust the policies and settings of other intrusion detection systems. For additional information, contact your network administrator or IT department. 112 Chapter 11 Security Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Installing critical updates CAUTION: Microsoft sends alerts regarding critical updates. To protect the computer from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. Updates to the operating system and other software may have become available after the computer was shipped. To be sure that all available updates are installed on the computer, observe these guidelines:

Run Windows Update monthly to install the latest software from Microsoft. Obtain updates, as they are released, from the Microsoft Web site and through the updates link in Help and Support. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Installing critical updates 113 Using HP ProtectTools Security Manager (select models only) HP ProtectTools Security Manager software is preinstalled on select computer models. This software can be accessed through Windows Control Panel. It provides security features that help protect against unauthorized access to the computer, networks, and critical data. For more information, refer to the HP ProtectTools online Help. 114 Chapter 11 Security Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Installing a security cable NOTE: A security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. 1. 2. 3. Loop the security cable around a secured object. Insert the key (1) into the cable lock (2). Insert the cable lock into the security cable slot on the computer (3), and then lock the cable lock with the key. NOTE: The location of the security cable slot varies by computer model. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Installing a security cable 115 12 Software updates Updating software Updated versions of the software provided with your computer are available either through the HP Assistant utility or on the HP Web site. HP Assistant automatically checks for updates from HP. The utility runs at a specified interval and provides a list of support alerts, such as security enhancements, and optional software and driver updates. You can manually check for updates at any time by selecting Start > Help and Support > Maintain, and then follow the on-screen instructions. Most software on the HP Web site is packaged in compressed files called SoftPaqs. Some BIOS updates may be packaged in compressed files called ROMPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. (Readme.txt files included with ROMPaqs are provided in English only.) You can also access software updates by obtaining the Support Software disc (purchased separately). This disc includes device drivers, BIOS updates, and utilities. To purchase the current Support Software disc or a subscription that provides both the current version and future versions of the disc, follow these steps:

1. Open your Internet browser, and go to http://www.hp.com/support. 2. Select your country or region. 3. Click the option for software and driver downloads, and then type your computer model number in the product box. 4. 5. Press enter. Follow the on-screen instructions. To update the software using a Support Software disc, follow these steps:

1. 2. Insert the Support Software disc into the optical drive. Follow the on-screen instructions. 116 Chapter 12 Software updates Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

To update the software using the HP Web site, follow these steps:

1. Identify your computer model, product category, and series or family. Prepare for a system BIOS update by identifying the BIOS version currently installed on the computer. For details, refer to the

"Determining the BIOS version" section. If your computer is connected to a network, consult the network administrator before installing any software updates, especially system BIOS updates. NOTE: The computer system BIOS is stored on the system ROM. The BIOS initializes the operating system, determines how the computer will interact with the hardware devices, and provides for data transfer among hardware devices, including the time and date. NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. Refer to Help and Support for more information. 2. Open your Internet browser, and go to http://www.hp.com/support. 3. Select your country or region. 4. Click the option for software and driver downloads, and then type your computer model number in the product box. 5. 6. Press enter. Follow the on-screen instructions. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Updating software 117 Updating the BIOS To update the BIOS, first determine what BIOS version you currently have, and then download and install the new BIOS. Determining the BIOS version BIOS version information (also known as ROM date and System BIOS) can be displayed by pressing fn+esc (if you are already in Windows) or by using Computer Setup. To use Computer Setup for displaying BIOS information, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select File > System Information. 4. Press esc to return to the File menu. 5. Click Exit in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Ignore changes and exit, and then press enter. 118 Chapter 12 Software updates Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Downloading a BIOS update CAUTION: To prevent damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these guidelines:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet. Do not shut down the computer or initiate Sleep or Hibernation. Do not insert, remove, connect, or disconnect any device, cable, or cord. To download a BIOS update:

NOTE: BIOS updates are posted as needed. A newer BIOS update may not be available for your computer. It is recommended that you check the HP Web site periodically for BIOS updates. 1. Open your Internet browser, go to http://www.hp.com/support, and then select your country or region. 2. Click the option for software and driver downloads, type your computer model number in the product box, and then press enter. 3. Click your specific product from the models listed. 4. Click your operating system. 5. 6. Follow the on-screen instructions to access the BIOS update you want to download. Make a note of the download date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. At the download area, perform these steps:

a. b. Identify the BIOS update that is newer than the BIOS version currently installed on your computer. Follow the instructions on the screen to download your selection to the hard drive. Make a note of the path to the location on your hard drive where the BIOS update will be downloaded. You will need to access this path when you are ready to install the update. NOTE:

any software updates, especially system BIOS updates. If you connect your computer to a network, consult the network administrator before installing BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the download is complete. If no instructions are displayed, follow these steps:

1. Open Windows Explorer by selecting Start > Computer. 2. Double-click your hard drive designation. The hard drive designation is typically Local Disk (C:). 3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the update. 4. Double-click the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Updating the BIOS 119 NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. Refer to Help and Support for more information. 5. Complete the installation by following the on-screen instructions. NOTE: After a message on the screen reports a successful installation, you may delete the downloaded file from your hard drive. 120 Chapter 12 Software updates Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Updating programs and drivers 1. Open your Internet browser, go to http://www.hp.com/support, and then select your country or region. 2. Click the option for software and driver downloads, type your computer model number in the product box, and then press enter. or If you want a specific SoftPaq, type the SoftPaq number in the Search box, at the top-right corner of the screen. Then press enter, and follow the instructions provided. Proceed to step 6. 3. Click your specific product from the models listed. 4. Click your operating system. 5. When the list of updates is displayed, click an update to open a window containing additional information. 6. Click Download. 7. Click Run to install the updated software without downloading the file. or Click Save to save the file to your computer. When prompted, select a storage location on your hard drive. After the file is downloaded, navigate to the folder where the file was stored, and then double-click the file to install the update. 8. If prompted to do so, restart your computer after the installation is complete. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Updating programs and drivers 121 Using SoftPaq Download Manager HP SoftPaq Download Manager (SDM) is a tool that provides quick access to SoftPaq information for HP business computers without requiring the SoftPaq number. Using this tool, you can easily search for SoftPaqs and then download and unpack them. SoftPaq Download Manager works by reading and downloading, from the HP FTP site, a published database file containing computer model and SoftPaq information. SoftPaq Download Manager allows you to specify one or more computer models to determine which SoftPaqs are available for download. SoftPaq Download Manager checks the HP FTP site for updates to the database and software. If updates are found, they are downloaded and applied automatically. SoftPaq Download Manager is available on the HP Web site. To use SoftPaq Download Manager to download SoftPaqs, you must first download and install the program. Go to the HP Web site at http://www.hp.com/go/sdm, and follow the instructions to download and install SoftPaq Download Manager. To download SoftPaqs:

1. Click Start > All Programs > HP > HP SoftPaq Download Manager. 2. When the SoftPaq Download Manager opens for the first time, a window is displayed asking if you want to show only software for the computer you are using or to show the software for all supported models. Select Show software for all supported models. If you have used HP SoftPaq Download Manager previously, go to Step 3. a. b. Select your operating system and language filters in the Configuration Options window. The filters limit the number of options that are listed in the Product Catalog pane. For example, if only Windows 7 Professional is selected in the operating system filter, the only operating system that is displayed in the Product Catalog is Windows 7 Professional. To add other operating systems, change the filter settings in the Configuration Options window. Refer to the HP SoftPaq Download Manager software Help for more information. 3. In the left pane, click the (+) sign to expand the model list, and then select the model or models of the products you want to update. 4. Click Find Available SoftPaqs to download a list of available SoftPaqs for the selected computer. 5. Select from the list of available SoftPaqs, and then click Download Only if you have many SoftPaqs to download, because the SoftPaq selection and Internet connection speed determine how long the download process will take. If you want to download only one or two SoftPaqs and have a high-speed Internet connection, click Download & Unpack. 6. Right-click Install SoftPaq in the SoftPaq Download Manager software to install the selected SoftPaqs on the computer. 122 Chapter 12 Software updates Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

13 Backup and recovery To protect your information, use Windows Backup and Restore to back up individual files and folders, back up your entire hard drive (select models only), create system repair discs (select models only), or create system restore points. In case of system failure, you can use the backup files to restore the contents of your computer. Windows Backup and Restore provides the following options:

Creating a system repair disc (select models only) Backing up individual files and folders Creating a system image (select models only) Scheduling automatic backups (select models only) Creating system restore points Recovering individual files Restoring the computer to a previous state Recovering information using recovery tools

NOTE: For detailed instructions, perform a search for these topics in Help and Support. NOTE:

them for later use. In case of system instability, HP recommends that you print the recovery procedures and save Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

123 Backing up your information Recovery after a system failure is as complete as your most current backup. You should create system repair discs (select models only) and your initial backup immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. The system repair discs (select models only) are used to start up (boot) the computer and repair the operating system in case of system instability or failure. Your initial and subsequent backups allow you to restore your data and settings if a failure occurs. You can back up your information to an optional external hard drive, a network drive, or discs. Note the following when backing up:

Store personal files in the Documents library, and back it up regularly. Back up templates that are stored in their associated programs. Save customized settings that appear in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen shot can be a time-saver if you have to reset your preferences. To create a screen shot:

1. Display the screen you want to save. 2. Copy the screen image:

To copy only the active window, press alt+fn+prt sc. To copy the entire screen, press fn+prt sc. 3. Open a word-processing document, and then select Edit > Paste. The screen image is added to the document. 4. Save the document.

When backing up to discs, use any of the following types of discs (purchased separately): CD-R, CD-RW, DVD+R, DVD+R DL, DVD-R, DVD-R DL, or DVDRW. The discs you use will depend on the type of optical drive installed in your computer. NOTE: DVDs and DVDs with double-layer (DL) support store more information than CDs, so using them for backup reduces the number of recovery discs required.

When backing up to discs, number each disc before inserting it into the optical drive of the computer. To create a backup using Backup and Restore, follow these steps:

NOTE: Be sure that the computer is connected to AC power before you start the backup process. NOTE: The backup process may take over an hour, depending on file size and the speed of the computer. 1. 2. Select Start > All Programs > Maintenance > Backup and Restore. Follow the on-screen instructions to set up your backup, create a system image (select models only), or create a system repair disc (select models only). 124 Chapter 13 Backup and recovery Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. Refer to Help and Support for more information. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Backing up your information 125 Performing a recovery In case of system failure or instability, the computer provides the following tools to recover your files:

Windows recovery tools: You can use Windows Backup and Restore to recover information you have previously backed up. You can also use Windows Startup Repair to fix problems that might prevent Windows from starting correctly.

f11 recovery tools: You can use the f11 recovery tools to recover your original hard drive image. The image includes the Windows operating system and software programs installed at the factory. NOTE:

If you are unable to boot (start up) your computer and you cannot use the system repair discs you previously created (select models only), you must purchase a Windows 7 operating system DVD to reboot the computer and repair the operating system. For additional information, refer to the Using a Windows 7 operating system DVD (purchased separately) section in this guide. Using the Windows recovery tools To recover information you previously backed up, follow these steps:

1. 2. Select Start > All Programs > Maintenance > Backup and Restore. Follow the on-screen instructions to recover your system settings, your computer (select models only), or your files. NOTE: Windows includes the User Account Control feature to improve the security of your computer. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. Refer to Help and Support for more information. To recover your information using Startup Repair, follow these steps:

CAUTION: Using Startup Repair completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. When reformatting is complete, the recovery process restores the operating system, as well as the drivers, software, and utilities from the backup used for recovery. 1. 2. 3. 4. 5. If possible, back up all personal files. If possible, check for the presence of the Windows partition and the HP Recovery partition. To check for the Windows partition, select Start > Computer. To check for the HP Recovery partition, select Start, right-click Computer, click Manage, and then click Disk Management. NOTE:

If the Windows partition and the HP Recovery partition are not listed, you must recover your operating system and programs using the Windows 7 operating system DVD and the Driver Recovery disc (both purchased separately). For additional information, refer to the Using a Windows 7 operating system DVD (purchased separately) section in this guide. If the Windows partition and the HP Recovery partition are listed, restart the computer, and then press f8 before the Windows operating system loads. Select Startup Repair. Follow the on-screen instructions. 126 Chapter 13 Backup and recovery Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

NOTE: For additional information on recovering information using the Windows tools, perform a search for these topics in Help and Support. Using f11 CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. The f11 recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory. Software not installed at the factory must be reinstalled. To recover the original hard drive image using f11, follow these steps:

1. 2. 3. 4. 5. If possible, back up all personal files. If possible, check for the presence of the HP Recovery partition: select Start, right-click Computer, click Manage, and then click Disk Management. If the HP Recovery partition is not listed, you must recover your operating system and NOTE:

programs using the Windows 7 operating system DVD and the Driver Recovery disc (both purchased separately). For additional information, refer to the Using a Windows 7 operating system DVD (purchased separately) section in this guide. If the HP Recovery partition is listed, restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f11 while the Press <F11> for recovery message is displayed on the screen. Follow the on-screen instructions. Using a Windows 7 operating system DVD (purchased separately) If you are unable to boot (start up) your computer and you cannot use the system repair discs you previously created (select models only), you must purchase a Windows 7 operating system DVD to reboot the computer and repair the operating system. Make sure that your most recent backup (stored on discs or on an external drive) is easily accessible. To order a Windows 7 operating system DVD, go to http://www.hp.com/support, select your country or region, and then follow the on-screen instructions. You can also order the DVD by calling technical support. For contact information, refer to the Worldwide Telephone Numbers booklet included with the computer. CAUTION: Using a Windows 7 operating system DVD completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. When reformatting is complete, the recovery process helps you restore the operating system, as well as drivers, software, and utilities. To initiate recovery using a Windows 7 operating system DVD, follow these steps:

NOTE: This process takes several minutes. 1. If possible, back up all personal files. 2. Restart the computer, and then insert the Windows 7 operating system DVD into the optical drive before the Windows operating system loads. 3. When prompted, press any keyboard key. 4. Follow the on-screen instructions. 5. Click Next. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Performing a recovery 127 6. 7. Select Repair your computer. Follow the on-screen instructions. 128 Chapter 13 Backup and recovery Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

14 Computer Setup Starting Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer. NOTE: An external keyboard or mouse connected to a USB port can be used with Computer Setup only if USB legacy support is enabled. To start Computer Setup, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. Using Computer Setup Navigating and selecting in Computer Setup The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and System Configuration menus. To navigate and select in Computer Setup, follow these steps:

1. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen.

To select a menu or a menu item, use the tab key and the keyboard arrow keys, and then press enter, or use a pointing device to click the item. To scroll up and down, click the up arrow or the down arrow in the upper-right corner of the screen, or use the up arrow key or the down arrow key. To close open dialog boxes and return to the main Computer Setup screen, press esc, and then follow the on-screen instructions. NOTE: You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the keyboard to navigate and make selections in Computer Setup. 2. 3. Press f10 to enter BIOS Setup. Select the File, Security, Diagnostics, or System Configuration menu. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Starting Computer Setup 129 To exit Computer Setup menus, choose one of the following methods:

To exit Computer Setup menus without saving your changes, click the Exit icon in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the tab key and the arrow keys to select File > Ignore changes and exit, and then press enter. or

To save your changes and exit Computer Setup menus, click the Save icon in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the tab key and the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. Restoring factory settings in Computer Setup NOTE: Restoring defaults will not change the hard drive mode. To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select File > Restore defaults. 4. 5. Follow the on-screen instructions. To save your changes and exit, click the Save icon in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. NOTE: Your password settings and security settings are not changed when you restore the factory settings. Computer Setup menus The menu tables in this section provide an overview of Computer Setup options. NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your computer. 130 Chapter 14 Computer Setup Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

File menu Select System Information Set System Date and Time Restore defaults Ignore changes and exit Save changes and exit Security menu To do this

View identification information for the computer and the batteries in the system. View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Set or change the date and time on the computer. Replace the configuration settings in Computer Setup with the original factory settings. (Hard drive mode, password settings, and security settings are not changed when you restore the factory settings.) Cancel any changes entered during the current session. Then exit and restart the computer. Save any changes entered during the current session. Then exit and restart the computer. Your changes go into effect when the computer restarts. NOTE: Some of the menu items listed in this section may not be supported by your computer. Select To do this Setup BIOS Administrator Password Set up a BIOS administrator password. User Management (requires a BIOS administrator password)

Create a new BIOS user account. View a list of ProtectTools users. Password Policy (requires a BIOS administrator password) Revise password policy criteria. HP SpareKey Enable/disable HP SpareKey (enabled by default). Always Prompt for HP SpareKey Enrollment Enable/disable HP SpareKey enrollment (enabled by default). Fingerprint Reset on Reboot (if present) Reset/clear the fingerprint reader ownership (select models only; disabled by default). Allow Reset of HP ProtectTools security keys Enable/disable reset of HP ProtectTools security keys. Change Password HP SpareKey Enrollment DriveLock Passwords Enter, change, or delete a BIOS administrator password. Enroll or reset HP SpareKey, which is a set of security questions and answers used if you forget your password.

Enable/disable DriveLock on any computer hard drive

(enabled by default). Change a DriveLock user password or master password. NOTE: DriveLock settings are accessible only when you enter Computer Setup by turning on (not restarting) the computer. Computer Setup menus 131 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Select TPM Embedded Security Automatic DriveLock Disk Sanitizer System IDs Diagnostics menu Select System Diagnostics menu To do this Enable/disable support for Trusted Platform Module (TPM) Embedded Security, which protects the computer from unauthorized access to owner functions available in Embedded Security for ProtectTools. For more information, refer to the ProtectTools software Help. NOTE: You must have a setup password to change this setting. Enable/disable Automatic DriveLock support. Run Disk Sanitizer to destroy all existing data on the primary hard drive or the drive in the upgrade bay. CAUTION:

drive is destroyed permanently. If you run Disk Sanitizer, the data on the selected Enter a user-defined computer asset tracking number and ownership tag. To do this Displays the following information:

System Information

Identification information for the computer and the batteries in the system. Specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version.

Start-up TestVerifies the system components needed for starting the computer. Run-In TestRuns a comprehensive check on system memory. Hard Disk TestRuns a comprehensive self-test on any hard drive in the system.

Memory TestRuns a comprehensive test on any memory installed in the computer.

Battery TestRuns a comprehensive test on any batteries installed in the computer. Error LogDisplays a log file if any errors have occurred. 132 Chapter 14 Computer Setup Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer. Select Language Boot Options Device Configurations To do this Change the Computer Setup language.

Set a Startup Menu delay (in seconds). Enable/disable Custom Logo (disabled by default). Enable/disable Display Diagnostic URL (enabled by default). Enable/disable CD-ROM boot (enabled by default). Enable/disable SD Card boot (enabled by default). Enable/disable floppy boot (enabled by default). Enable/disable PXE Internal NIC boot (enabled by default). Set the Express Boot Popup delay in seconds. Set the boot order. Enable/disable USB legacy support (enabled by default). When enabled, USB legacy support allows the following:

Use of a USB keyboard in Computer Setup even when a Windows operating system is not running. Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer. Select a parallel port mode: ECP (Enhanced Capabilities Port), standard, bidirectional, or EPP (Enhanced Parallel Port). Enable/disable fan always on while connected to an AC outlet (enabled by default). Enable/disable LAN Power Save (select models only). When enabled, saves power by turning off the LAN when not in use (enabled by default). Enable/disable Data Execution Prevention. When enabled, the processor can disable some virus code execution, which helps to improve computer security. SATA (Serial Advanced Technology Attachment) device mode. The following options are available:

AHCI (Advanced Host Controller Interface) IDE (Integrated Drive Electronics) RAID (Redundant Array of Independent Disks)

(select models only) Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Computer Setup menus 133 Select To do this NOTE: Availability of the options above varies by computer model. Enable/disable secondary battery fast charge (enabled by default). Enable/disable HP QuickLook 2 (enabled by default). Enable/disable Virtualization Technology (select models only; disabled by default). Enable/disable TXT (Intel Trusted Execution Technology) (select models only; disabled by default). Enable/disable Dual Core CPU (select models only;

enabled by default). Enable/Disable Unified Extensible Firmware Interface

(UEFI) mode (disabled by default). Enable/disable the wireless button state (enabled by default). Enable/disable embedded WWAN device radio (select models only; enabled by default). Enable/disable embedded Bluetooth device radio

(enabled by default). Enable/disable the Network Interface Controller (LAN)

(enabled by default). Set the wake on LAN state. Options include the following:

Disabled Boot to Network (set by default) Follow Boot Order Enable/disable the fingerprint device (enabled by default). Enable/disable a modem device (enabled by default). Enable/disable the embedded WLAN device (enabled by default). Enable/disable LAN/WLAN switching (disabled by default). Enable the ambient light sensor (enabled by default). Enable/disable the Notebook Multibay device (enabled by default). Enable/disable the integrated camera (select models only; enabled by default).

Built-In Device Options 134 Chapter 14 Computer Setup Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Select Port Options To do this NOTE: All port options are enabled by default.

Enable/disable the Smart Card slot. Enable/disable the ExpressCard slot. Enable/disable the serial port. Enable/disable the parallel port. Enable/disable the flash media reader. Enable/disable the USB port. CAUTION: Disabling the USB port also disables MultiBay devices and ExpressCard devices on the advanced port replicator. Enable/disable the 1394 port. AMT Options NOTE: All AMT options are disabled by default.

Enable/disable Firmware Verbosity. Enable/disable AMT Setup Prompt (CTRL-P). Enable/disable USB Key Provisioning Support. Enable/disable Unconfigure AMT on Next Boot. Enable/disable Terminal Emulation Mode Enable/disable Firmware Progress Event Support. Enable/disable include TYPE-131 in SMBIOS. Set Security Level Restore Security Defaults Change, view, or hide security levels for all BIOS menu items. Restore the default security settings. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Computer Setup menus 135 15 MultiBoot About the boot device order As the computer starts, the system attempts to boot from enabled boot devices. The MultiBoot utility, which is enabled at the factory, controls the order in which the system selects a boot device. Boot devices can include optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices. Boot devices contain bootable media or files that the computer needs to start and operate properly. NOTE: Some boot devices must be enabled in Computer Setup before they can be included in the boot order. The factory setting is for the computer to select the boot device by searching enabled boot devices and drive bay locations in the following order:

NOTE: Some of the boot devices and drive bay locations listed may not be supported on your computer.

Notebook MultiBay Internal hard drive USB diskette drive USB CD-ROM USB hard drive Notebook Ethernet Secure Digital (SD) Memory Card Docking station MultiBay External SATA drive

You can change the order in which the computer searches for a boot device by changing the boot order in Computer Setup. You can also press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen, and then press f9. Pressing f9 displays a menu that shows the current boot devices and allows you to select a boot device. Or, you can use MultiBoot Express to set the computer to prompt you for a boot location each time the computer turns on or restarts. If MultiBoot is disabled, the computer uses a fixed boot order that consists of first searching for a drive A boot device. If none is found, the computer looks for a drive C boot device. Drive A boot devices include optical drives and diskette drives. Drive C boot devices include optical drives and hard drives. The NIC does not have an assigned drive letter. 136 Chapter 15 MultiBoot Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

NOTE: An optical drive (such as a CD-ROM drive) can boot either as drive A or drive C, depending on the format of the boot CD. The following list describes the factory setting for boot order in which drive letters A and C are assigned when MultiBoot is disabled. (The actual order varies by configuration.)

Boot order for drive A boot devices:

1. Optical drive in an optional docking device or in an optional external MultiBay that contains a disc formatted as drive A 2. Optical drive in the internal MultiBay (select models only) that contains a disc formatted as drive A 3. Diskette drive in an optional docking device or in an optional external MultiBay

Boot order for drive C boot devices:

1. Optical drive in an optional docking device or in an optional external MultiBay that contains a disc formatted as drive C 2. Optical drive in the internal MultiBay (select models only) that contains a disc formatted as drive C 3. Hard drive in the computer hard drive bay 4. Hard drive in an optional docking device or in an optional external MultiBay NOTE: Because no drive letter is associated with the NIC, changing the boot order of a NIC does not affect the drive letters of the other devices. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

About the boot device order 137 Enabling boot devices in Computer Setup The computer will boot to a USB device or a NIC device only if the device has first been enabled in Computer Setup. To start Computer Setup and enable a USB device or a NIC device as a boot device, follow these steps:

1. 2. 3. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. To enable bootable media in USB drives or in drives inserted into an optional docking device (select models only), use a pointing device or the arrow keys to select System Configuration > Device Configurations. Confirm that Enabled is selected next to USB legacy support. NOTE: The USB Port option must be enabled in order to use USB legacy support. It is enabled at the factory. If the port becomes disabled, reenable it by selecting System Configuration > Port Options, and then clicking Enabled next to USB Port. or To enable a NIC device, select System Configuration > Boot Options, and then click Enabled next to PXE Internal NIC boot. 4. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. NOTE: To connect a NIC to a Preboot eXecution Environment (PXE) or Remote Program Load (RPL) server without using MultiBoot, press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen, and then quickly press f12. 138 Chapter 15 MultiBoot Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Considering boot order changes Before changing the boot order, note the following considerations:

When the computer restarts after the boot order has been changed, the computer attempts to start using the new boot order.

If there is more than one type of boot device, the computer attempts to boot using the first of each type of boot device (except for optical devices). For example, if the computer is connected to an optional docking device (select models only) that contains a hard drive, this hard drive will be shown in the boot order as a USB hard drive. If the system attempts to boot from this USB hard drive and fails, it will not attempt to boot to the hard drive in the hard drive bay. Instead, it will try to boot to the next type of device in the boot order. However, if there are two optical devices, and the first optical device does not boot (either because it does not contain media or the media is not a boot disc), the system will try to boot to the second optical device. Changing the boot order also changes the logical drive designations. For example, if you start up from a CD-ROM drive with a disc formatted as drive C, that CD-ROM drive becomes drive C and the hard drive in the hard drive bay becomes drive D. The computer will boot from a NIC device only if the device has been enabled in the Built-In Device Options menu of Computer Setup and if booting from the device has been enabled in the Boot Options menu of Computer Setup. Booting from a NIC does not affect logical drive designations because no drive letter is associated with the NIC. Drives in an optional docking device (select models only) are treated like external USB devices in the boot order. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Considering boot order changes 139 Choosing MultiBoot preferences You can use MultiBoot in the following ways:

To set a new boot order that the computer uses each time it is turned on, by changing the boot order in Computer Setup. To dynamically choose the boot device, by pressing esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen, and then pressing f9 to enter the Boot Device Options menu. To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device each time the computer is turned on or restarted. Setting a new boot order in Computer Setup To start Computer Setup and set a boot device order that the computer uses each time it is turned on or restarted, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select System Configuration > Boot Options. Confirm that Enabled is selected next to MultiBoot. NOTE: MultiBoot is enabled at the factory. 4. Use a pointing device or the arrow keys to select a device in the list. 5. To move the device up in the boot order, use a pointing device to click the plus sign (+) or press the + key. or To move the device down in the boot order, click the minus sign (-) or press the - key. 6. To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. Dynamically choosing a boot device using the F9 prompt To dynamically choose a boot device for the current startup sequence, follow these steps:

1. Open the Select Boot Device menu by turning on or restarting the computer, and then pressing esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. 2. Press f9. 3. Use a pointing device or the arrow keys to select a boot device, and then press enter. 140 Chapter 15 MultiBoot Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Your changes go into effect immediately. Setting a MultiBoot Express prompt To start Computer Setup and set the computer to display the MultiBoot startup location menu each time the computer is started or restarted, follow these steps:

1. 2. Turn on or restart the computer, and then press esc while the Press the ESC key for Startup Menu message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select System Configuration > Boot Options, and then press enter. 4. 5. In the Express Boot Popup Delay (Sec) field, enter the length of time in seconds that you want the computer to display the startup location menu before it defaults to the current MultiBoot setting.

(When 0 is selected, the Express Boot startup location menu is not displayed). To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. Entering MultiBoot Express preferences When the Express Boot menu displays during startup, you have the following choices:

To specify a boot device from the Express Boot menu, select your preference within the allotted time, and then press enter. To prevent the computer from defaulting to the current MultiBoot setting, press any key before the allotted time expires. The computer will not start until you select a boot device and press enter. To allow the computer to start according to the current MultiBoot settings, wait for the allotted time to expire. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Choosing MultiBoot preferences 141 16 Management and printing Using Client Management Solutions Client Management Solutions software provides standards-based solutions for managing client (user) desktop, workstation, notebook, and tablet computers in a networked environment. Client management includes the following key capabilities and features:

Initial software image deployment Remote system software installation Software management and updates ROM updates Tracking and security of computer assets (the hardware and software installed on the computer) Fault notification and recovery of certain system software and hardware components

NOTE: Support for specific features described in this section may vary, depending on computer model and/or version of management software installed on the computer. Configuring and deploying a software image The computer is shipped with a preinstalled system software image. The initial software image is configured during the first-time setup of the computer. After a brief software "unbundling" occurs, the computer is ready to be used. A customized software image can be deployed (distributed) in one of the following ways:

Installing additional software applications after unbundling the preinstalled software image Using software deployment tools, such as Altiris Deployment Solutions, to replace the preinstalled software with a customized software image Using a disk-cloning process to copy the contents from one hard drive to another

The deployment method you use depends on your organization's technology environment and processes. NOTE: The Computer Setup utility and other system features provide further assistance with configuration management and troubleshooting, power management, and the recovery of system software. 142 Chapter 16 Management and printing Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Managing and updating software HP provides several tools for managing and updating software on client computers:

HP Client Manager for Altiris (select models only) NOTE: To download HP Client Manager for Altiris or to obtain more information about HP Client Manager for Altiris, see the HP Web site at http://www.hp.com. HP CCM (Client Configuration Manager) (select models only) HP SSM (System Software Manager) HP Client Manager for Altiris (select models only) HP Client Manager for Altiris integrates Intelligent Manageability technology into Altiris software. HP Client Manager for Altiris provides superior hardware management capabilities for HP devices:

Detailed views of hardware inventory for asset management System Checkup monitoring and diagnostics

Web-accessible reporting of business-critical details such as thermal warnings and memory alerts Remote updating of system software such as device drivers and the system BIOS

NOTE: Additional functionality can be added when HP Client Manager for Altiris is used with optional Altiris Solutions software (purchased separately). When HP Client Manager for Altiris (installed on a client computer) is used with Altiris Solutions software

(installed on an administrator computer), HP Client Manager for Altiris provides increased management functionality and centralized hardware management of client devices for the following IT life-cycle areas:

Inventory and asset management

Software license compliance Computer tracking and reporting Computer lease contract information and fixed asset tracking

System software deployment and migration

Windows migration System deployment

Personality (personal user settings) migration Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using Client Management Solutions 143

Help desk and problem resolution

Management of help desk tickets Remote troubleshooting Remote problem resolution Client disaster recovery

Software and operations management

Ongoing client management HP system software deployment Application self-healing (the ability to identify and repair certain application problems) Altiris Solutions software provides easy-to-use software distribution capabilities. HP Client Manager for Altiris enables communication with the Altiris Solutions software, which can be used to complete new hardware deployment or personality migration to a new operating system using easy-to-follow wizards. HP Client Manager for Altiris is available for download from the HP Web site. When Altiris Solutions software is used in conjunction with HP System Software Manager or HP Client Manager for Altiris, administrators can also update the system BIOS and device driver software from a central console. HP CCM (Client Configuration Manager) (select models only) HP CCM (Client Configuration Manager) automates the management of software such as operating systems, programs, software updates, and content and configuration settings to ensure that each computer is maintained in the correct configuration. With these automated management solutions, you can manage software throughout the life cycle of the computer. CCM enables you to perform the following tasks:

Collect hardware and software inventory across multiple platforms Prepare a software package and conduct impact analysis prior to distribution Target individual computers, workgroups, or entire populations of computers for deployment and maintenance of software and content according to policies Provision and manage operating systems, applications, and content on distributed computers from any location Integrate CCM with help desks and other system management tools for seamless operations Leverage a common infrastructure for management of software and content on standard computing devices across any network for all enterprise users Scale to meet enterprise needs HP SSM (System Software Manager) HP SSM (System Software Manager) lets you remotely update system-level software on multiple systems simultaneously. When executed on a client computer, SSM detects versions of both hardware and software, and then updates designated software from a central repository, known as a file store. Driver versions that are supported by SSM are denoted with a special icon on the HP driver download 144 Chapter 16 Management and printing Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Web site and on the Support Software CD. To download the SSM utility or to obtain more information on SSM, see the HP Web site at http://www.hp.com/go/ssm (English only). Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using Client Management Solutions 145 Using Intel Active Management Technology (select models only) Intel Active Management Technology (iAMT) allows discovery, repair, and protection of networked computing assets. With iAMT, computers can be managed whether they are on or off. The iAMT solution is available on computers with Intel Centrino with vPro mobile technology. Features of iAMT include:

Hardware inventory information Event notification Power management Remote diagnosis and repair Hardware-based isolation and recoverylimit or cut off computer network access if virus-like activity is detected Enabling the iAMT solution To configure iAMT settings:

NOTE: The ctrl+p prompt is visible only if the AMT Setup Prompt option is enabled in Computer Setup. 1. 2. 3. Turn on or restart the computer. Before Windows starts up, press ctrl+p. NOTE:

the MEBx setup utility. If you do not press ctrl+p at the appropriate time, you must repeat steps 1 and 2 to access Enter the ME password. The factory setting for the password is admin. The MEBx setup utility opens. Use the arrow keys to navigate. 4. Choose to configure Intel ME, configure iAMT, or change the Intel ME password. 5. When you have made your selections, select Exit to close the MEBx setup utility. Using the MEBx setup utility menus NOTE: For more information on iAMT, go to the Intel Web site at http://www.intel.com, and then search for iAMT. Intel ME Configuration Select Intel ME State Control To do this Disable/enable the management engine. Intel ME Firmware Local Update Disable/enable local management of firmware updates. LAN Controller Intel ME Features Control Intel ME Power Control Disable/enable the integrated network controller. Enable AMT or none. Configure the management engine power policies. 146 Chapter 16 Management and printing Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

iAMT Configuration Select Host Name TCP/IP Provision Model Setup and Configuration Un-Provision SOL/IDE-R Password Policy To do this Assign a host name to the computer. Disable/enable network interface or DHCP (assigns an IP address if DHCP has been disabled) or change the domain name. Assign Enterprise or Small Business iAMT model. Set options to control remote configuration of AMT. Reset the AMT configuration to factory defaults. Enable remote boot control to IDE diskette or CD-ROM and assign a user name and password. Set options to control requirements for the network password and the MEBx password. Secure Firmware Update Enable or disable updating firmware remotely. Set PRTC Idle Timeout Set the real-time clock. Set a time-out value. Change Intel ME Password Select Change ME Password To do this Change the password. NOTE: The default password is admin. Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Using Intel Active Management Technology (select models only) 147 Using the HP Universal Print Driver (select models only) The HP Universal Print Driver Series for Windows is a single intelligent driver that replaces individual drivers for HP networked printers. NOTE: The HP Universal Print Driver is preinstalled on select computer models only. To download the HP Universal Print Driver or obtain more information about using it, see the HP Web site at http://www.hp.com/go/universalprintdriver (English only). To print using the HP Universal Print Driver:

1. 2. Select File > Print from any application. Select HP Universal Printing PS from the list of printers. 3. Click Print. 4. Enter the printer's IP address or network path. NOTE:

administrator for help. If you cannot identify the printer's IP address or network path, contact your IT 5. Select the Make a permanent instance of this printer in my Printers folder check box. 6. Click Print. 148 Chapter 16 Management and printing Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Index Symbols/Numerics 1394 cable, connecting 88 1394 devices connecting 88 stopping 88 1394 port identifying 8 using 88 A AC adapter connecting 65 identifying 13 accessory battery connector, identifying 10 Active Management Technology, Intel 146 administrator password 102 airport security devices 78 Altiris Deployment Solutions 142 ambient light sensor hotkey 44 identifying 11 AMT options AMT setup prompt

(CTRL-P) 135 firmware progress event support 135 firmware verbosity 135 terminal emulation mode 135 TYPE-131 in SMBIOS 135 unconfigure AMT on next antennas boot 135 USB key provisioning support 135 external WWAN 12 WLAN 12 WWAN 12 applications key, Windows 5 audio devices, connecting external 56 audio functions, checking 56 audio-in (microphone) jack, audio-out (headphone) jack, identifying 7 identifying 7 Automatic DriveLock password entering 108 removing 108 B backing up files 124 Backup and Restore 123, 124 battery calibrating 71 charging 68, 71 conserving power 73 disposing 74 identifying 13 inserting 67 low battery levels 69 recharging 73 removing 67 replacing 74 storing 74 battery bay 10, 14 battery charge information 44 battery charge, maximizing 69 battery light 3, 68, 69 battery power 66 battery release latch, identifying 10, 67 battery temperature 74 battery test 132 bays battery 10, 14 hard drive 10 BIOS administrator password 131 BIOS update downloading 119 installing 119 Bluetooth compartment, identifying 6 Bluetooth device 20, 30 Bluetooth label 14 boot devices, enabling 138 boot options 133 boot order 133 built-in device ambient light sensor 134 Bluetooth device radio 134 embedded WLAN 134 fingerprint reader 134 integrated camera 134 LAN/WLAN switching 134 modem 134 Network Interface Controller

(LAN) 134 Notebook Multibay 134 Wake on LAN 134 wireless button 134 WWAN device radio 134 built-in device options 134 business card reader software 60 business card slot 6 buttons ctrl+alt+del 9, 15 esc 9, 15 external WWAN antenna 6, 12 keyboard light 11 pointing stick 2 Quick Launch 46 QuickLook 7, 46 QuickWeb 7, 46 rotate 9, 15 TouchPad 2 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Index 149 volume down 4 volume mute 4, 53 volume up 4 C cables 1394 88 LAN 39 modem 34 USB 86 calibrating battery 71 caps lock light, identifying 3 CD protecting 55 writing to 55 Computer Setup utility 142 configuring ExpressCards 93 connecting to a LAN 39 connecting to a WLAN 25 Connection Manager icon 21 connection, external power 65 connector, power 9 conservation, power 73 convertible hinge, identifying 11, 15 cord, power 13 corporate WLAN connection 25 country- or region-specific modem cable adapter, identifying 13 country-specific modem cable CD drive 89 Certificate of Authenticity label 14 changing boot order 140 charge level indicator, adapter 34 creating a backup 124 critical battery level 70 ctrl+alt+del button 9, 15 identifying 10 charging batteries 68, 71 checking audio functions 56 components additional hardware 13 bottom 10 display 11 front 6 left-side 8 rear 9 right-side 7 top 1 composite video 43 computer information 118 Computer Setup BIOS administrator password 103 device security 109 Diagnostics menu 132 DriveLock password 105 enabling bootable devices 138 File menu 131 navigating and selecting 129 restoring factory settings 130 Security menu 131 setting boot order 140 setting MultiBoot Express prompt 141 System Configuration menu 133 D deployment, software 142 device configurations 133 device security 109 Diagnostics menu 132 digital card inserting 91 removing 92 stopping 92 Disk Cleanup software 79 Disk Defragmenter software 79 Disk Sanitizer 132 diskette drive 89 display image, switching 43 notebook mode 18 rotating 16 screen brightness hotkeys 44 tablet mode 16 display release latch, identifying 6 display switch, identifying 4 docking connector identifying 10 using 90 drive light identifying 3 status 80 drive media 62 DriveLock password changing 106 description 105 entering 106 removing 107 setting 106 DriveLock, automatic 132 drives boot order 133, 136 caring for 78 diskette 89 external 89 hard 82, 83, 89 optical 89 Dual Core CPU 134 DVD protecting 55 writing to 55 DVD drive 89 E encryption 25 error log 132 esc button 9, 15 esc key, identifying 5 Execution Disable 133 ExpressCard configuring 93 inserting 93 removing 94 removing insert 93 stopping 94 ExpressCard slot 8 external audio devices, connecting 56 external drive 89 external monitor port identifying 9 using 58 external WWAN antenna button, identifying 6 F f11 recovery 127 File menu 131 fingerprint reader, identifying 7, 11 firewall 25 150 Index Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

fn key identifying 5 using 2 function keys identifying 5 using 42 H hard disk drive HP 3D DriveGuard 80 installing 83 replacing 82 hard disk test 132 hard drive external 89 HP 3D DriveGuard 80 installing 83 replacing 82 hard drive bay, identifying 10 hard drive recovery 127 HDMI 43 headphone (audio-out) combo jack 7 Hibernation exiting 63 initiated during critical battery level 70 initiating 63 hinge, convertible 11, 15 holder, pen 16 hotkeys ambient light sensor 44 battery charge information 44 decreasing screen brightness 44 description 42 displaying system information 42 enabling/disabling the TouchPad 42 increasing screen brightness 44 initiating Sleep 43 switching screen image 43 using 42 HP 3D DriveGuard 80 HP Client Configuration Manager 143, 144 HP Client Manager for Altiris 143 HP Connection Manager software 22 HP Mobile Broadband Module 27 HP QuickLook 2 134 HP SpareKey enrollment 131 HP System Software Manager 143, 144 HP Universal Print Driver, using 148 hubs 86 I icons Connection Manager 21 network 32 network status 21 wireless 21 IEEE 1394 port, identifying 8 image, computer 142 inserting a memory module 99 Intel Centrino Pro technology 146 interference, minimizing 33 internal display switch, identifying 4 internal microphone, identifying 11 Internet connection setup 24 J jacks audio-in (microphone) 7 audio-out (headphone) 7 RJ-11 (modem) 7 RJ-45 (network) 9 Java Card defined 96 inserting 96 removing 96 jog dial 9, 15 K keyboard hotkeys, identifying 42 keyboard light using 40 keyboard light button, identifying 11 keypad keys, identifying 5 keypad, embedded enabling and disabling 51 switching key functions 51 using 51 keys esc 5 fn 5 function 5 keypad 5 Windows applications 5 Windows logo 5 L labels Bluetooth 14 HP Mobile Broadband Module 14 Microsoft Certificate of Authenticity 14 modem approval 14 regulatory 14 service tag 14 SIM 14 wireless certification 14 WLAN 14 LAN Power Save 133 LAN, connecting 39 language, changing in Computer Setup 133 latch, battery release 10 legacy support, USB 129, 133 lights battery 3 caps lock 3 drive 3, 80 keyboard 40 mute 3 num lock 4 power 3 TouchPad 1, 3 volume down 3 volume mute 3 volume up 4 webcam 6, 11 wireless 8 local area network (LAN) cable required 39 connecting cable 39 logical drive designations 139 low battery level 69 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Index 151 M maintenance Disk Cleanup 79 Disk Defragmenter 79 McAfee Total Protection 111, 112 Media Card Reader, identifying 8 memory module adding 98 inserting 99 removing 98 replacing 98 memory test 132 microphone (audio-in) combo jack 7 microphone, internal 11 Microsoft Certificate of Authenticity label 14 minimizing interference 33 modem approval label 14 modem cable connecting 34 country-specific cable adapter 34 noise suppression circuitry 34 modem cable adapter, identifying 13 modem cable, identifying 13 modem software setting/adding location 35 travel connection problems 37 monitor port, external 9 monitor, connecting 58 mouse, external connecting 40 setting preferences 40 MultiBoot Express 136, 141 multimedia software accessing 55 mute button, identifying 4, 53 mute light, identifying 3 N network cable connecting 39 noise suppression circuitry 39 network icon 32 network key 32 network security codes network key 32 SSID 32 Network Service Boot 138 network status icon 21 NIC boot device 136, 138 noise suppression circuitry modem cable 34 network cable 39 num lock light, identifying 4 O operating system Microsoft Certificate of Authenticity label 14 Product Key 14 optical disc writing to 55 optical drive protecting 55 Smart Card slot 135 USB port 135 ports 1394 8, 88 external monitor 9, 58 USB 7, 86 power connecting 65 conserving 73 power connector, identifying 9 power cord, identifying 13 power light, identifying 3 power plans 63 power switch, identifying 6 Product Key 14 product name and number, computer 14 projector, connecting 58 public WLAN connection 25 PXE server 138 P parallel port mode 133 passwords administrator 102 BIOS administrator 103 DriveLock 105 user 102 pen calibrating 50 identifying 48 setting preferences 51 using 48 pen holder identifying 8, 16 using 50 pointing devices setting preferences 40 using 40 pointing stick identifying 2 using 40 pointing stick buttons, identifying 2 port options 1394 port 135 ExpressCard slot 135 flash media reader 135 parallel port 135 serial port 135 Q Quick Launch Buttons 46 Quick Launch Buttons control panel 46 QuickLook button, identifying 7, QuickWeb button, identifying 7, 46 46 R RAID (Redundant Array of Independent Disks) devices 133 readable media 62 reader, fingerprint 7, 11 recovery partition 127 regulatory information modem approval label 14 regulatory label 14 wireless certification labels 14 release latch, battery 10, 67 replacing a memory module 98 restore security defaults 135 restore the factory settings 131 restoring the hard drive 127 RJ-11 (modem) jack, identifying 7 RJ-45 (network) jack, identifying 9 152 Index Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

rotate button 9, 15 run-in test 132 S S-Video 43 SATA (Serial Advanced Technology Attachment) devices AHCI (Advanced Host Controller Interface) 133 IDE (Integrated Drive Electronics) 133 screen brightness hotkeys 44 screen image, switching 43 scroll zone, TouchPad 2 Secondary Battery Fast Charge 134 security cable slot, identifying 7 Security menu allow reset of HP ProtectTools security keys 131 always prompt for HP SpareKey enrollment 131 Automatic DriveLock 132 change password 131 Disk Sanitizer 132 DriveLock 131 fingerprint reader reset 131 HP Sparekey 131 HP Sparekey enrollment 131 password policy 131 set up BIOS administrator password 131 System IDs 132 user management 131 security, wireless 24 serial number, computer 14 service tag 14 set security level 135 setup of WLAN 24 setup utility Diagnostics menu 132 File menu 131 navigating and selecting 129 restoring factory settings 130 Security menu 131 System Configuration menu 133 setup, computer 1 shutdown 75 shutting down 75 SIM inserting 27 removing 28 SIM slot, identified 10 Sleep exiting 62 initiating 62 Sleep hotkey 43 slots business card 6 ExpressCard 8 Media Card Reader 8 memory 97 memory module 10 security cable 7 SIM 10 smart card reader 7 smart card defined 96 inserting 96 removing 96 smart card reader, identifying 7 SoftPaqs, downloading 121, 122 software BIOS update 119 business card reader 60 deployment 142 Disk Cleanup 79 Disk Defragmenter 79 HP Connection Manager 22 recovery 142 updates 143 updating programs and drivers 121 Wireless Assistant 22 start-up test 132 storing battery 74 switches internal display 4 power 6 wireless 8 System Configuration menu 133 system date and time 131 System Diagnostics menu 132 system fan 133 system IDs 132 system information 131 system information hotkey 42 T tablet display components 15 temperature 74 tips, webcam 59 TouchPad buttons 2 enabling/disabling 42 identifying 2 scroll zone 2 using 40 TouchPad light 1, 3 TouchPad on/off control 1 TPM Embedded Security 132 traveling with the computer modem approval label 14 troubleshooting 31 troubleshooting modem 37 turning off the computer 75 TXT (Intel Trusted Execution Technology) 134 U Unified Extensible Firmware Interface (UEFI) mode 134 Universal Print Driver, using 148 unresponsive system 75 updates, software 143 USB cable, connecting 86 USB devices connecting 86 description 86 removing 86 stopping 86 USB hubs 86 USB legacy support 87, 129, 133 USB port, powered 8 USB ports, identifying 7, 86 user password 102 using the webcam 59 V vents, identifying 6, 8, 10 video transmission types 43 Virtualization Technology 134 volume buttons 53 volume down button, identifying 4 volume down light, identifying 3 Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Index 153 functional range 26 public WLAN connection 25 security 24 using 24 wireless switch, identifying 8 wireless wide area network

(WWAN) 27 WLAN antennas, identifying 12 WLAN device 14, 20, 24 WLAN label 14 writable media 62 WWAN antenna button, external 12 WWAN antenna, external 6, 12 WWAN antennas, identifying 12 WWAN device 20, 27 volume mute button, identifying 4, 53 volume mute light, identifying 3 volume up button, identifying 4 volume up light, identifying 4 volume, adjusting 53 W Web sites HP System Software Manager 145 HP Universal Print Driver 148 Intel Centrino Pro 146 Intel Pro technology for AMT 146 webcam capturing business cards 60 identifying 11 tips 59 using 59 webcam light, identifying 6, 11 webcam properties, adjusting 59 Windows 7 operating system DVD 127 Windows applications key, identifying 5 Windows logo key, identifying 5 wireless antennas 12 Wireless Assistant software 21, 22 wireless button 21 wireless certification label 14 wireless controls button 21 Connection Manager software 21 operating system 21 Wireless Assistant software 21 wireless devices location 10 types 20 wireless icon 21 wireless light, identifying 8, 21 wireless network (WLAN) connecting 25 corporate WLAN connection 25 described 20 equipment needed 24 154 Index Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/

 

 

Regulatory, Safety and Environmental Notices User Guide Copyright 2008, 2009 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. ENERGY STAR is a registered mark owned by the U.S. government. Intel is a trademark of Intel Corporation in the U.S. and other countries. Java is a trademark of Sun Microsystems. Microsoft, Windows, and Windows Vista are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Sixth Edition: September 2009 First Edition: August 2008 Document Part Number: 506242-006 Table of contents 1 Regulatory notices Federal Communications Commission notice ...................................................................................... 2 Modifications ........................................................................................................................ 2 Cables .................................................................................................................................. 2 Declaration of Conformity for products marked with the FCC logo (United States only) ..................................................................................................................................... 3 Products with wireless LAN devices or HP Mobile Broadband Modules ............................. 3 Brazilian notice ..................................................................................................................................... 4 Canadian notices .................................................................................................................................. 4 Avis Canadien ...................................................................................................................................... 4 European Union notices ....................................................................................................................... 4 Products with 2.4-GHz wireless LAN devices ...................................................................... 5 France ................................................................................................................. 5 Products with HP Mobile Broadband Modules .................................................................... 6 Ergonomics notice ............................................................................................................... 6 Germany ............................................................................................................. 6 Japanese notices ................................................................................................................................. 7 Wireless LAN 802.11b devices ............................................................................................ 7 Wireless LAN 802.11g devices ............................................................................................ 7 Bluetooth devices ................................................................................................................ 7 Wireless LAN, Wireless WAN, and Bluetooth certification markings ................................... 8 Korean notice ....................................................................................................................................... 8 Singaporean wireless notice ................................................................................................................ 8 Thailand WWAN wireless notice .......................................................................................................... 9 Taiwan notices ..................................................................................................................................... 9 Wireless LAN 802.11a devices ............................................................................................ 9 Wireless LAN 802.11b devices ............................................................................................ 9 Airline travel notice ............................................................................................................................... 9 Battery notices .................................................................................................................................... 10 ENERGY STAR compliance .............................................................................................................. 10 Laser compliance ............................................................................................................................... 11 Modem notices ................................................................................................................................... 11 Telecommunications device approvals .............................................................................. 11 U.S. modem statements .................................................................................................... 12 iii U.S. modem declarations .................................................................................................. 12 Canadian modem statements ............................................................................................ 20 Japanese modem statements ............................................................................................ 20 New Zealand modem statements ...................................................................................... 21 Voice support .................................................................................................... 21 Power cord notice ............................................................................................................................... 22 Japanese power cord notice .............................................................................................. 22 Macrovision Corporation notice .......................................................................................................... 22 2 Safety notices Heat-related safety warning notice ..................................................................................................... 23 Battery notices .................................................................................................................................... 23 Headset and earphone volume level notice ....................................................................................... 23 Power cord notices ............................................................................................................................. 24 Cleaning the keyboard ....................................................................................................................... 24 Travel notice ....................................................................................................................................... 24 Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................... 24 3 Environmental notices Electronic hardware and battery recycling ......................................................................................... 25 Disposal of waste equipment by users in private households in the European Union ....................... 25 Chemical substances ......................................................................................................................... 26 Chinese material content declarations ............................................................................................... 26 Japanese material content declaration ............................................................................................... 29 Turkey EEE regulation ....................................................................................................................... 30 United States mercury disposal .......................................................................................................... 30 Perchlorate materialspecial handling may apply ............................................................................ 30 Index ................................................................................................................................................................... 31 iv 1 Regulatory notices This guide provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. To identify a hardware device such as a wireless LAN (WLAN) network device, choose the procedure below that corresponds to the operating system running on your computer. For Windows XP Professional and Windows XP Home, follow these steps:

1. 2. Select Start > My Computer. If the left pane, select View System Information > Hardware tab > Device Manager. For Windows Vista, follow these steps:

1. 2. Select Start > Computer > System properties. In the left pane, click Device Manager. For later Windows operating systems, such as Windows 7, follow these steps:

Select Start > Control Panel > System and Security > Device Manager. For non-Windows operating systems, follow the instructions provided by your operating system to identify a hardware device such as a wireless LAN (WLAN) network device. Regulatory markings for your country or region may be located on the bottom of the product, either under the battery, under a user-removable door (or some other user-accessible location), or on the wireless or modem module. To view the FCC IDs for any radio modules in your notebook (Bluetooth, WLAN, or WWAN), follow these steps:

1. 2. 3. Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup Menu"

message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. Select the System Configuration menu. The FCC IDs are displayed at the bottom of the screen. CAUTION: Devices not for sale or use in the United States may not have an FCC ID. 1 Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. 2 Chapter 1 Regulatory notices Declaration of Conformity for products marked with the FCC logo

(United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. 2. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. If you have questions about the product that are not related to this declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000 For questions regarding this FCC declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000 or call HP at 281-514-3333 To identify your product, refer to the part, series, or model number located on the product. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers. During normal operation of tablet PCs and notebook computers with displays equal to or less than 12 inches: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides. To access the user guides, select Start > Help and Support > User Guides. During normal operation of notebook computers with displays greater than 12 inches: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides. To access the user guides, select Start > Help and Support > User Guides. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-

channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-

GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. Federal Communications Commission notice 3 Brazilian notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Canadian notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Wireless operation is subject to 2 conditions. The first is that the wireless device may not cause interference. The second is that the wireless device must accept any interference, including interference that may cause undesired operation of the device. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25-

to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. Avis Canadien Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. European Union notices Products bearing the CE marking comply with the following EU Directives:

Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC EuP Directive 2005/32/EC, where applicable

CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP. If this product has telecommunications functionality, it also complies with the essential requirements of the following EU Directive:

R&TTE Directive 1999/5/EC

Compliance with these directives implies conformity to applicable harmonized European standards

(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family. This compliance is indicated by one of the following conformity markings placed on the product. 4 Chapter 1 Regulatory notices

The following CE marking is valid for non-telecommunications products and for EU harmonized telecommunications products, such as Bluetooth.

The following CE marking is valid for EU non-harmonized telecommunications products.

*If applicable, a notified body number is used. Refer to the regulatory label provided on this product. The telecommunications functionality of this product may be used in the following EU and EFTA countries:

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. The official EU CE declaration of conformity for this device (in English only) may be found at http://www.hp.com/go/certificates. The point of contact for regulatory matters is:

Hewlett-Packard GmbH, HQ-TRE Herrenberger Strasse 140 71034 Boeblingen GERMANY Products with 2.4-GHz wireless LAN devices France L'utilisation de cet equipement (2.4GHz wireless LAN) est soumise certaines restrictions : cet equipement peut tre utilis l'interieur d'un batiment en utilisant toutes les frequences de 2400 a 2483.5MHz (Chane 113). Pour une utilisation en environnement exterieur, vous devez utiliser les frequences comprises entre 24002454MHz (Chane 19) peuvent tre utilis. Pour les dernires restrictions, voir http://www.arcep.fr. For 2.4-GHz Wireless LAN operation of this product, certain restrictions apply: This product may be used indoors for the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 to 13). For outdoor use, only the 2400-MHz to 2454-MHz frequency band (channels 1 to 9) may be used. For the latest requirements, see http://www.arcep.fr. European Union notices 5 Products with HP Mobile Broadband Modules THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCY RADIATION. The HP Mobile Broadband Module in your notebook is a radio transmitter and receiver. The device is designed not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines that establish permitted levels of RF radiation for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The device also meets the European R&TTE directives, including the protection of the health and the safety of the user and any other person. The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR).* The SAR was obtained by testing the device at standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR of the device while operating can be well below the maximum value, because the device operates at multiple power levels and uses only the power required to reach the network. When installed in the notebook computer, this device meets RF exposure guidelines when the antennas are positioned at a minimum distance from the body. In order to transmit data or messages, this device requires a quality connection to the network. In some cases, transmission of data or messages may be delayed until such a connection becomes available. Be sure that the recommended distance is observed until the transmission is complete.

*The non-FCC, international guidelines state that the SAR limit for mobile devices used by the public is 2.0 watts/kilogram (W/kg) averaged over 10 grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. Ergonomics notice Germany Mobile computers bearing the "GS" approval mark meet the ergonomic requirements and are suitable only for short-time use of VDU tasks. When a mobile computer is used for display work tasks where the Visual Display Unit (VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000:2008 This device is intended for use at visual display workplaces in compliance with BildscharbV, only with external keyboard and adequate external monitor. During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may occur which result in reduced readability. Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur fr kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Wird ein mobiler Computer fr Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG

(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhngig 6 Chapter 1 Regulatory notices von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationren Arbeitsplatz zu erreichen. Ref: EK1-ITB 2000:2008 Das Gert ist fr die Benutzung am Bildschirmarbeitsplatz gem BildscharbV nur mit externer Tastatur und geeignetem Monitor vorgesehen. Bei mobiler Nutzung mit ungnstigen Lichtverhltnissen (z.B. direkte Sonneneinstrahlung) kann es zu Reflexionen und damit zu Einschrnkungen der Lesbarkeit der dargestellten Zeichen kommen. Japanese notices Wireless LAN 802.11b devices Wireless LAN 802.11g devices Bluetooth devices Japanese notices 7 Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. Korean notice Singaporean wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. 8 Chapter 1 Regulatory notices Thailand WWAN wireless notice This telecom equipment has complied with NTC regulations. Taiwan notices Wireless LAN 802.11a devices Wireless LAN 802.11b devices Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. Thailand WWAN wireless notice 9 Battery notices WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For information about removing a battery, refer to the user guide included with the product. ENERGY STAR compliance HP computers marked with the ENERGY STAR logo are qualified with the applicable U.S. Environmental Protection Agency (EPA) ENERGY STAR specifications for computers. The EPA ENERGY STAR logo does not imply endorsement by the EPA. As an ENERGY STAR Partner, Hewlett-

Packard Company has determined that the products marked with the ENERGY STAR logo are ENERGY STAR qualified as per the applicable ENERGY STAR guidelines for energy efficiency. The following logo will appear on all ENERGY STAR qualified computers:

The ENERGY STAR program for computers was created by the EPA to promote energy efficiency and reduce air pollution through more energy-efficient equipment in homes, offices, and factories. One way that products achieve this goal is by using the Microsoft Windows power management feature to reduce power consumption when the product is not in use. The power management feature allows the computer to initiate a low-power or Sleep mode after a period of user inactivity. When used with an external ENERGY STAR qualified monitor, this feature also supports similar power management features of the monitor. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power:

Turn off the display after 15 minutes Initiate Sleep after 30 minutes

The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/

powermanagement. Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov. 10 Chapter 1 Regulatory notices Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. This product may be provided with a device containing a laser that is classified as a Class 1 Laser Product in accordance with US FDA regulations and the IEC 60825-1. The product does not emit hazardous laser radiation. Each laser product complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated May 27, 2001; and with IEC 60825-1:1993/A2:2001. Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/

laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. Laser compliance 11 U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

12 Chapter 1 Regulatory notices Modem notices 13 14 Chapter 1 Regulatory notices Modem notices 15 16 Chapter 1 Regulatory notices Modem notices 17 18 Chapter 1 Regulatory notices Modem notices 19 Canadian modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japanese modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the Agere Systems AC'97 modem is below:

The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:

The Japanese certification mark for the Agere Systems HDA modem is below:

The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:

The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

20 Chapter 1 Regulatory notices The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. b. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the Modem notices 21 personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japanese power cord notice Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 22 Chapter 1 Regulatory notices 2 Safety notices Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). Battery notices WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. WARNING! Keep the battery away from children. WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Headset and earphone volume level notice WARNING! Listening to music at high volume levels and for extended durations can damage ones hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels. For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same. Changing the default audio or equalizer settings might lead to higher volume and should only be done with caution. For your own safety, headsets or earphones used with this product should comply with the headphone limits in EN 50332-2. If the computer includes a headset or earphones, this combination is in compliance to EN 50332-1. Heat-related safety warning notice 23 Power cord notices WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. Cleaning the keyboard WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris. Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system. 24 Chapter 2 Safety notices 3 Environmental notices This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. Disposal of waste equipment by users in private households in the European Union This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service. Electronic hardware and battery recycling 25 Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. Chinese material content declarations The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Toxic and Hazardous Substances and Elements Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O Part Name Battery Cables Camera Chassis/Other Flash memory card reader 26 Chapter 3 Environmental notices Toxic and Hazardous Substances and Elements Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X X O X X X X X X X X X X X X X X X X O O O O O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Part Name Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Remote control Smart card/Java card reader Speakers, external TV tuner USB flash memory drive USB hub Web camera Wireless receiver Wireless cards O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. All parts named in this table with an X are in compliance with the European Union's RoHS Legislation Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment and its amendments. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity. Chinese material content declarations 27 28 Chapter 3 Environmental notices Japanese material content declaration A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide material content declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950. Japanese material content declaration 29 Turkey EEE regulation In Conformity with the EEE regulation EEE Ynetmeliine Uygundur United States mercury disposal This HP product contains the following materials that might require special handling at end-of-life:

Mercury in the fluorescent lamp in the display LCD Disposal of mercury can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) http://www.eiae.org. NOTE: Notebook computers configured with LED backlights do not contain mercury lamps. Perchlorate materialspecial handling may apply See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. This products real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California. 30 Chapter 3 Environmental notices Index Symbols/Numerics 2.4-GHz wireless LAN devices 5 France, 2.4-GHz wireless LAN devices 5 A airline travel notice 9 B battery notice 10, 23 Brazilian notice 4 C cable grounding notice 24 Canadian French notices 4 Canadian modem statement 20 Canadian notices 4 Chinese Material Content Declarations 26 D Declaration of Conformity 3 disposal notices equipment 25 mercury 30 E electronic hardware and battery recycling 25 ENERGY STAR compliance 10 environmental notices 25 equipment disposal notice 25 ergonomics notice 6 European Union notices 4 F Federal Communications Commission cables 2 modifications 2 notice 2 G GS Notice 6 H hardware device, identifying 1 headset and earphone volume level notice 23 J Japanese material content declaration 29 Japanese modem statement 20 Japanese notice 7 Japanese power cord notice 22 K keyboard notice 24 Korean notice 8 L laser safety notice 11 M Macrovision Corporation notice 22 mercury disposal notice 30 modem notices 11 modem statements Canadian 20 Japanese 20 New Zealand 21 U.S. 12 modifications, Federal Communications Commission 2 N New Zealand modem statement 21 notices airline travel 9 battery 10, 23 Brazilian 4 Canadian 4 Canadian French 4 environmental 25 equipment disposal 25 ergonomics 6 European Union 4 Federal Communications Commission 2 headset and earphone volume level 23 Japanese 7 Japanese power cord 22 keyboard 24 Korean 8 laser safety 11 Macrovision Corporation 22 mercury disposal 30 modem 11 perchlorate material 30 power cords 22, 24 Singaporean 8 Taiwan 9 Thailand WWAN wireless notice 9 travel 24 P power cord notice 22, 24 S Singaporean wireless notice 8 Index 31 T Taiwan notice 9 Thailand WWAN wireless notice 9 travel notice 24 TV tuner, cable grounding notice 24 U U.S. modem statement 12 V voice support 21 W wireless LAN devices 3 32 Index

 

 

 

 

 

 

 

 

 

 

 

 

 

 

APPLICATION NEXT ASSY PROJECT NO. ECN NO. REVISION 12736

REV A DESCRIPTION PRODUCTION RELEASE DATE 01/21/10 APPROVED C. MOORE REFERENCE DOCUMENTS 109893 Specification, Supplier Packaging/Material Handling. 137124 Specification, Label Orientation and Liner Format. 453669 Specification, Cosmetic Requirements. HX-00011-00 General Specification for the Environment. CSA List of Accepted Adhesive Type Name Plates. Canadian Standards Association UL 969 Standard for Safety of Marking and Labeling Systems. Underwriters Laboratories, Inc. (U.L.) REQUIREMENTS MATERIAL FACESTOCK: .002 5% Thick Polyester film. ADHESIVE: Permanent bonding pressure-sensitive acrylic adhesive (min. thickness .0007 10%). Suitable for bonding to a polycarbonate/ABS blend surface. Minimum service temperature range shall be -20C to +80C. OVERLAMINATE: .003 thick SP Pacific LTD #FR88 Velvet Matte Lexan. LINER: 40# to 60# (basis weight) removable, release coated paper liner. NOTES:

1. Compliance to the latest revision of Hewlett-Packard General Specification for the Environment (GSE Document number HX-00011-00), including the RoHS Compliance Specification in the GSE, is required. http://www.hp.com/hpinfo/globalcitizenship/environment/pdf/gse.pdf 2. Alternate material (facestock, adhesive, overlaminate or liner) must be pre-approved for production compatibility by Procurement and/or Product Engineering Groups. MECHANICAL LABEL ORIENTATION ON LINER: Unwind will be chosen based on economy of producibility and to ensure delivery of unblemished labels. Reference document 137124. MAXIMUM ROLL DIAMETER: 8.00 [203.2]

INK Pantone Process Black C. 453669

. Artwork files specify content only. COSMETIC REQUIREMENTS The label will conform to document Labels should match notebook color as specified by HP Industrial Design. Label content must follow HP Regulatory Worldwide Technical Regulations Label Guidelines. AGENCY REQUIREMENTS UL Recognized Component Marking and Labeling System (PGDQ2 or PGJI2) Canadian Standards Association (CSA) Approved Manufacturer of Accepted Adhesive Type Name Plates

(CSA Identifier will appear on the label.) SHIPPING AND QUALITY REQUIREMENTS Refer to document 109893 and 137124. ARTWORK AVAILABILITY Electronic artwork files are controlled by and available from Documentation Control Group (Houston). HP RESTRICTED THIS DOCUMENT AND ANY ASSOCIATED DATA CONTAIN RESTRICTED INFORMATION THAT IS HEWLETT-PACKARD (HP) PROPERTY. DO NOT DISCLOSE TO OR DUPLICATE FOR OTHERS EXCEPT AS AUTHORIZED BY HP. APPROVALS DRAWN HA DOAN CHECKED C. MOORE DSGN ENGR A. ST. CYR C. MOORE DATE 01/21/10 01/22/10 01/22/10 01/22/10 ENG MFG QA LEGAL AGENCY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES

[MILLIMETERS]. TOLERANCES ARE:

FRACTIONS DECIMALS ANGLES 1/32

.XX .02 [0.5]

.XXX .010 [0.25]

1 LBL, SYS REG PP 2X2 AGN HMC -SAR W. OVERCASH 01/22/10 DO NOT SCALE DRAWING DRAWING NO. SIZE A SUPPLEMENTS: EF, EF-EPS, EF-PDF 609262 REV A 2 SHEET 1 OF TYPICAL -001/00A LABEL This Line Does Not Print Square Corner 4 Places 609262-001 CONTAINS INTEL WLAN RADIO MODEL 622ANHMW CONTAINS FCC ID: B94622ANHMW IC: 466Q-662ANHMW C/M: 622ANHU SCT RCPIN6209-1009 CNC C-7678 CMIIT ID: 2009AJ4549 I C S CCAH09LP0980T4 TA-2009/1101 A P P R O VE D Complies with IDA Standards DB 02941 12760 9 1823 1.60 .02

[40.6 0.5]

2835-09-2198

(01) 0789355200213-3 2.00 .02

[50.8 0.5]

DRAWING NO. SIZE A DRAWN: H.D 609262 REV A SCALE 2/1 SHEET 2 OF 2 Label Location

 

 

(A =

zg _ Intel Centrino Ultimate-N 6200

% FCC ID:B94622ANHMW | [5

= C/M: 622ANHU

= IC: 466Q-622ANHMW Model: 622ANHU MAC: COOOOOMMMBMM MIM: XOOCKXX TA: XXXXXX-XXX CLA l

| uoresoT [aq] |

 

 

Hewlett-Packard Company 11445 Compaq Center Drive Mail Stop 050807 Houston, TX 77070 www.hp.com Walter Overcash Product Regulatory Engineer Telecom / Safety 281.514.2756 Tel walter.overcash@hp.com February 3, 2010 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA Dear Sirs:

Please consider this communication as authorization for SGS Taiwan Ltd. to open projects on Hewlett-Packards behalf for the purpose of Radio assessment/certification under the following conditions:

1. This authorization is extended only to the Hewlett-Packard FCC ID B94622ANHMW. All product certifications must be performed at the request of SGS Taiwan Ltd. 2. This authorization is extended only for the following certifications/testing: FCC 3. All invoices for services rendered should be sent to SGS Taiwan Ltd. and not to Hewlett-Packard. Licenses and test reports generated on Hewlett-Packards behalf must be emailed or copied to my attention when completed. 4. No access should be granted to any existing Hewlett-Packard file or project information. I hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS as our agent, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including Hewlett-Packard Company 1234 Street Name, Suite 123 Mail Stop 000bx City Name, CA 12345-6789 www.hp.com February 4, 2010 Page 2 internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) make claims regarding certification only in respect of the scope for which certification has been granted;

d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

f) use certification only to indicate the products are certified as being in conformity with specified standards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from us. If you have any comments or questions, please feel free to contact me. Sincerely, Walter Overcash

 

 

Authorization on Behalf of Hewlett-Packard Company For the US Federal Communications Commission Office of Engineering and Technology and Other FCC Programs and Offices 1. I, David P. Adams, am Canada/USA Technical Regulations Manager for Hewlett-

Packard Company (Hewlett-Packard) and Applicant/Grantee Contact of Record for Hewlett-

Packard together with its subsidiaries and affiliates worldwide (collectively, HP) for HPs dealings with the United States Federal Communications Commission (FCC). I am duly authorized by HP to make this Authorization on HPs behalf. 2. This Authorization will designate the person named below to act on my behalf and HPs behalf as authorized agent and representative, until further notice, with the additional power to designate one or more third party agents for HP with regard to particular matters and applications. All acts carried out and requests made by this named representative relating to any matter before the FCC, including requests for confidentiality, shall have the same effect as mine. Name:

Title:

Address:

Telephone:

E-mail:

Walter Overcash Regulatory Engineer Hewlett-Packard Company Mailstop 050807 11445 Compaq Center Drive W Houston, TX 77070 281-514-2756 walter.overcash@hp.com follows:

3. Questions about the scope and effect of this Authorization should be addressed as David P. Adams Canada/USA Region Technical Regulations Manager 1501 Page Mill Road, MS 1229 Palo Alto, CA 94304-1126 650.857.4423 Telephone 650.857.4882 Fax dadams@hp.com 4. I declare under penalty of perjury that the foregoing is true and correct, and that this Authorization was executed at Palo Alto, California, on the date indicated below my signature. ____________________________ Signature David P. Adams Canada/USA Technical Regulations Manager Hewlett-Packard Company _March 5, 2008______________ Date

 

 

February 6, 2010 Federal Communications Commission Authorization and Evaluation Division Dear Sirs, Request for Class II Permissive Change FCC ID: B94622ANHMW Pursuant to CFR 2.1043, Quanta Computer Inc hereby requests a Class II Permissive Change. The model name shall be same as before. Modification:

1. The Change filed under this application is adding to Tablet PC type that collocates with :

Bluetooth FCC ID : QDS-BRCM1043 WWAN FCC ID : J9CGOBI2000-H There are no change in hardware or in existing RF relevant portion. 2. The difference compared with the original design is adding 2 antenna to this EUT, G rant Date: 02/05/2010 Max. Gain(dBi) 0.51 Max. Gain(dBi) 0.18 Type:PIFA Antenna TX1:

Part Number 925.0946.001 / T-000077-01 TX2 :

Part Number 25.90947.001 / T-000078-01 Walter Overcash / Regulatory Engineer Hewlett-Packard Company

 

 

February 6, 2010 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: B94622ANHMW Dear Sirs:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions Rules ( 47 CFR 0.457,0.459),we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely.

([Confidential]Theory of operation_B94622ANHMW) Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments 180 days:

External Photos ([Short-tern Confidential]External Photo_B94622ANHMW) Internal Photos([Short-tern Confidential]Internal Photo_B94622ANHMW) Test Setup Photos([Short-tern Confidential]Set up Photo_B94622ANHMW) User Manual([Short-tern Confidential]User Manual_B94622ANHMW) It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. If you have any comments or questions, please feel free to contact me. Sincerely, _ ____________________________________ Walter Overcash / Regulatory Engineer