companies    

FCC ID: B94-8265D2WZ Intel Dual Band Wireless-AC 8265

by: HP Inc. latest update: 2018-09-13 model: 8265D2WZ

Six grants have been issued under this FCC ID from 08/03/2018 to 09/13/2018 (this is one of eighty-six releases in 2018 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked password defaults, troubleshooting guides, instructions, drivers, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manuals
app s submitted / available
1 2 3 4 5 6 General Notebook Regulatory Guide Users Manual pdf 2.26 MiB November 09 2018 / March 02 2019
1 2 3 4 5 6 User Manual Users Manual pdf 513.42 KiB February 08 2018
1 2 3 4 5 6 Users Manual Users Manual pdf 4.30 MiB November 09 2018 / March 02 2019
1 2 3 4 5 6
Cover Letter(s) pdf November 09 2018
1 2 3 4 5 6
External Photos pdf November 09 2018 / March 02 2019
1 2 3 4 5 6
Cover Letter(s) pdf November 09 2018
1 2 3 4 5 6
ID Label/Location Info pdf November 09 2018
1 2 3 4 5 6
Internal Photos pdf November 09 2018 / March 02 2019
1 2 3 4 5 6
RF Exposure Info pdf November 09 2018
1 2 3 4 5 6
Test Setup Photos pdf November 09 2018 / March 02 2019
1 2 3 4 5 6
Cover Letter(s) pdf November 09 2018
1 2 3 4 5 6
ID Label/Location Info pdf June 08 2018 / November 09 2018
1 2 3 4 5 6
RF Exposure Info pdf June 08 2018 / November 09 2018
1 2 3 4 5 6
Cover Letter(s) pdf February 08 2018 / March 08 2018
1 2 3 4 5 6
Cover Letter(s) pdf February 08 2018 / March 08 2018
1 2 3 4 5 6
Internal Photos pdf February 08 2018
1 2 3 4 5 6
Cover Letter(s) pdf February 08 2018 / March 08 2018
1 2 3 4 5 6 General Notebook Regulatory Guide Users Manual pdf 2.26 MiB November 09 2018 / March 02 2019
1 2 3 4 5 6 User Manual Users Manual pdf 513.42 KiB February 08 2018
1 2 3 4 5 6 Users Manual Users Manual pdf 4.30 MiB November 09 2018 / March 02 2019

frequency equipment class purpose
1 2018-09-13 2412 ~ 2472 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
2 2018-09-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
4 2018-08-03 2412 ~ 2472 DTS - Digital Transmission System Change in identification of presently authorized equipment. Original FCC ID: PD98265D2 Grant Date: 06/28/2016
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
1 2 3 4 5 6 Effective 2018-09-13
1 2 3 4 5 6 2018-09-11
1 2 3 4 5 6 2018-08-03
1 2 3 4 5 6 Applicant's complete, legal business name HP Inc.
1 2 3 4 5 6 FCC Registration Number (FRN) 0025126541
1 2 3 4 5 6 Physical Address 3390 East Harmony Road
1 2 3 4 5 6 Fort Collins, Colorado 80528
1 2 3 4 5 6 United States
app s TCB Information
1 2 3 4 5 6 TCB Application Email Address c******@telefication.com
1 2 3 4 5 6 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 6 Grantee Code B94
1 2 3 4 5 6 Equipment Product Code 8265D2WZ
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 Name R******** P****** T****
1 2 3 4 5 6 Title US Canada Technical Regulations
1 2 3 4 5 6 Telephone Number 970-8********
1 2 3 4 5 6 Fax Number 000-0********
1 2 3 4 5 6 E-mail r******@hp.com
app s Technical Contact
1 2 3 4 5 6 Firm Name SGS Taiwan Ltd
1 2 3 4 5 6 SGS Taiwan Ltd.
1 2 3 4 5 6 Name J****** C********
1 2 3 4 5 6 Physical Address 134, Wu Kung Road, WuKu Industrial Zone
1 2 3 4 5 6 134, Wu Kung Road, Wuku Industrial Zone
1 2 3 4 5 6 Taiwan
1 2 3 4 5 6 Telephone Number 886 2********
1 2 3 4 5 6 88622******** Extension:
1 2 3 4 5 6 Fax Number 886 2********
1 2 3 4 5 6 88622********
1 2 3 4 5 6 E-mail J******@sgs.com
app s Non Technical Contact
1 2 3 4 5 6 Firm Name SGS Taiwan Ltd
1 2 3 4 5 6 SGS Taiwan Ltd.
1 2 3 4 5 6 Name J****** C******
1 2 3 4 5 6 Physical Address 134, Wu Kung Road, WuKu Industrial Zone
1 2 3 4 5 6 134, Wu Kung Road, Wuku Industrial Zone
1 2 3 4 5 6 Taiwan
1 2 3 4 5 6 Telephone Number 886 2********
1 2 3 4 5 6 88622******** Extension:
1 2 3 4 5 6 Fax Number 886 2********
1 2 3 4 5 6 88622********
1 2 3 4 5 6 E-mail J******@sgs.com
app s Confidentiality (long or short term)
1 2 3 4 5 6 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)02/03/2019
1 2 3 4 5 6 01/30/2019
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 Equipment ClassDTS - Digital Transmission System
1 2 3 4 5 6 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Dual Band Wireless-AC 8265
1 2 3 4 5 6 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
1 2 3 4 5 6 No
1 2 3 4 5 6 Modular Equipment TypeDoes not apply
1 2 3 4 5 6 Single Modular Approval
1 2 3 4 5 6 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 3 4 5 6 Change in identification of presently authorized equipment. Original FCC ID: PD98265D2 Grant Date: 06/28/2016
1 2 3 4 5 6 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 Grant CommentsC2PC: (a) To be used in different host, Convertible PC (Portable category configuration, Brand : HP/Model: TPN-C137). (b) To add 2 new antennas with same type and lower gain. This device has 20/40 MHz bandwidth modes. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 1.54 W/kg and 1.32W/kg respectively.
1 2 3 4 5 6 C2PC: (a) To be used in different host, Convertible PC (Portable category configuration, Brand : HP/Model: TPN-C137). (b) To add 2 new antennas with same type and lower gain. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20 W/kg and 1.48 W/kg respectively.
1 2 3 4 5 6 C2PC: (a) To be used in different host, Convertible PC (Portable category configuration, Brand : HP/Model: TPN-C137). (b) To add 2 new antennas with same type and lower gain. This device has 20/40/80 MHz bandwidth modes. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.40 W/kg and 1.48 W/kg respectively.
1 2 3 4 5 6 Change in Identification : Original FCC ID: PD98265D2, and Grant Date: 06/28/2016. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.68W/kg and 1.59W/kg respectively.
1 2 3 4 5 6 Change in Identification : Original FCC ID: PD98265D2, and Grant Date: 06/28/2016. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.59W/kg respectively.
1 2 3 4 5 6 Change in Identification : Original FCC ID: PD98265D2, and Grant Date: 06/28/2016. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively.
1 2 3 4 5 6 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 Firm Name SGS Taiwan Ltd. Electronics & Communication Lab
1 2 3 4 5 6 Name R**** W****
1 2 3 4 5 6 Telephone Number +886-******** Extension:
1 2 3 4 5 6 Fax Number +886-********
1 2 3 4 5 6 E-mail r******@sgs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.007
1 2 15C CC MO 2412 2472 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.146
3 2 15E CC MO ND 5260 5320 0.162
3 3 15E CC MO ND 5500 5700 0.174
3 4 15E CC MO ND 5710 5710 0.186
3 5 15E CC MO ND 5720 5720 0.146
3 6 15E CC MO 5745 5825 0.22
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.007
4 2 15C CC MO 2412 2472 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.146
6 2 15E CC MO ND 5260 5320 0.162
6 3 15E CC MO ND 5500 5700 0.174
6 4 15E CC MO ND 5710 5710 0.186
6 5 15E CC MO ND 5720 5720 0.146
6 6 15E CC MO 5745 5825 0.22

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

potentially related items: B94-9560D2WZ User Manual B94HHI14CN USERS MANUAL B94HHF606 User manual Final Review

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC