FCC ID: B94-AX200D2LP Intel Wireless -AX200

User Guide Product notice Software terms This guide describes features that are common to most models. Some features may not be available on your computer. Not all features are available in all editions of Windows. This computer may require upgraded and/or separately purchased hardware, drivers and/or software to take full advantage of Windows functionality. Go to http://www.microsoft.com for details. To access the latest user guide, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on-screen instructions. By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund, subject to the refund policy of your seller. For any further information or to request a full refund of the price of the computer, please contact your seller. Copyright 2014 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of the Microsoft group of companies. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: August 2014 Document Part Number: 765879-001 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). iii iv Safety warning notice Processor configuration setting (select models only) IMPORTANT: Select computer models are configured with an Intel Atom E3800 processor and a Windows operating system. On these models, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings. v vi Processor configuration setting (select models only) Table of contents 1 Starting right ...................................................................................................................................................... 1 Visit the HP Apps Store ........................................................................................................................ 1 Best practices ....................................................................................................................................... 1 More HP resources .............................................................................................................................. 2 2 Getting to know your computer ......................................................................................................................... 4 Locating hardware ................................................................................................................................ 4 Locating software ................................................................................................................................. 4 Identifying components ........................................................................................................................ 5 Using the action keys ......................................................................................................................... 11 Labels ................................................................................................................................................. 12 3 Connecting to a network ................................................................................................................................. 14 Connecting to a wireless network ....................................................................................................... 14 Using the wireless controls ................................................................................................ 14 Wireless button ................................................................................................. 14 Operating system controls ................................................................................ 15 Connecting to a WLAN ...................................................................................................... 15 Using HP Mobile Broadband (select models only) ............................................................ 16 Using Bluetooth wireless devices (select models only) ..................................................... 16 Connecting to a wired networkLAN (select models only) ............................................................... 16 Sharing data and drives and accessing software ............................................................................... 17 Sharing media and data across your home group network (select models only) ............................... 17 4 Enjoying entertainment features ..................................................................................................................... 19 Using a webcam (select models only) ................................................................................................ 19 Using audio ........................................................................................................................................ 19 Connecting speakers ......................................................................................................... 19 Connecting headphones .................................................................................................... 19 Connecting a microphone .................................................................................................. 20 Connecting headsets ......................................................................................................... 20 Using Beats Audio (select models only) ............................................................................ 20 Accessing Beats Audio Control Panel ............................................................... 20 Enabling and disabling Beats Audio .................................................................. 20 Using video ......................................................................................................................................... 20 Connecting video devices by using a VGA cable (select models only) ............................. 21 vii Connecting video devices using an HDMI cable (select models only) .............................. 21 Setting up HDMI audio ...................................................................................... 22 Connecting digital display devices using a DisplayPort cable (select models only) .......... 23 Connecting Miracast-compatible wireless displays (select models only) .......................... 24 5 Navigating the screen ..................................................................................................................................... 25 Using the TouchPad and touch screen gestures ............................................................................... 25 Tap ..................................................................................................................................... 25 Two-finger scroll ................................................................................................................ 25 Two-finger pinch zoom ...................................................................................................... 26 Two-finger click .................................................................................................................. 26 Right-edge swipe ............................................................................................................... 26 Left-edge swipe ................................................................................................................. 27 Top-edge swipe and bottom-edge swipe ........................................................................... 27 One-finger slide (touch screen only) .................................................................................. 27 Using a keyboard and optional mouse ............................................................................................... 28 6 Managing power ............................................................................................................................................. 29 Initiating and exiting Sleep and Hibernation ....................................................................................... 29 Manually initiating and exiting Sleep .................................................................................. 30 Manually initiating and exiting Hibernation (select models only) ....................................... 30 Setting password protection on wakeup (exiting Sleep or Hibernation) ............................ 30 Using the power meter and power settings ........................................................................................ 31 Running on battery power .................................................................................................................. 31 Factory-sealed battery (select models only) ...................................................................... 31 User-replaceable battery (select models only) .................................................................. 32 Finding battery information ................................................................................................ 32 Conserving battery power .................................................................................................. 33 Resolving a low battery level ............................................................................................. 33 Resolving a low battery level when external power is available ........................ 33 Resolving a low battery level when no power source is available ..................... 33 Resolving a low battery level when the computer cannot exit Hibernation ....... 33 Storing a user-replaceable battery (select models only) .................................................... 33 Disposing of a user-replaceable battery (select models only) ........................................... 34 Running on AC power ........................................................................................................................ 34 Troubleshooting power problems ...................................................................................... 35 Shutting down (turning off) the computer ........................................................................................... 35 7 Maintaining your computer .............................................................................................................................. 37 Improving performance ...................................................................................................................... 37 viii Using Disk Defragmenter ................................................................................................... 37 Using Disk Cleanup ........................................................................................................... 37 Updating programs and drivers .......................................................................................................... 37 Cleaning your computer ..................................................................................................................... 38 Cleaning procedures .......................................................................................................... 38 Cleaning the display .......................................................................................... 38 Cleaning the sides or cover ............................................................................... 39 Cleaning the TouchPad, keyboard, or mouse (select models only) .................. 39 Traveling with or shipping your computer ........................................................................................... 39 8 Securing your computer and information ........................................................................................................ 41 Using passwords ................................................................................................................................ 41 Setting Windows passwords .............................................................................................. 41 Setting Setup Utility (BIOS) passwords ............................................................................. 42 Using the fingerprint reader (select models only) ............................................................................... 42 Using Internet security software ......................................................................................................... 42 Using antivirus software ..................................................................................................... 43 Using firewall software ....................................................................................................... 43 Installing software updates ................................................................................................................. 43 Installing critical security updates ....................................................................................................... 43 Securing your wireless network .......................................................................................................... 44 Backing up your software applications and information ..................................................................... 44 Using an optional security cable lock ................................................................................................. 44 9 Using Setup Utility (BIOS) ............................................................................................................................... 45 Starting Setup Utility (BIOS) ............................................................................................................... 45 Updating the BIOS ............................................................................................................................. 45 Determining the BIOS version ........................................................................................... 45 Downloading a BIOS update ............................................................................................. 46 10 Using HP PC Hardware Diagnostics (UEFI) ................................................................................................. 47 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ................................................ 47 11 Backing up, restoring, and recovering .......................................................................................................... 49 Creating recovery media and backups (select models only) .............................................................. 49 Creating HP Recovery media (select models only) ........................................................... 49 Using Windows tools ......................................................................................................... 50 Restore and recover (select models only) .......................................................................................... 50 Recovering using HP Recovery Manager (select models only) ......................................... 51 What you need to know ..................................................................................... 51 ix Using the HP Recovery partition (select models only) ...................................... 52 Using HP Recovery media to recover ............................................................... 52 Changing the computer boot order ................................................................... 52 12 Specifications ................................................................................................................................................ 53 Input power ......................................................................................................................................... 53 Operating environment ....................................................................................................................... 54 13 Electrostatic Discharge ................................................................................................................................. 55 Index ................................................................................................................................................................... 56 x 1 Starting right This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer and about where to find additional HP resources. Visit the HP Apps Store The HP Apps Store offers a wide choice of popular games, entertainment and music apps, productivity apps, and apps exclusive to HP that you can download to the Start screen. The selection is updated regularly and includes regional content and country-specific offers. Be sure to check the HP Apps Store frequently for new and updated features. IMPORTANT: You must be connected to the Internet to access the HP Apps Store. To view and download an app:

1. 2. From the Start screen, select the Store app. Select HP picks to view all the available apps. NOTE: HP picks is available in select countries only. 3. Select the app you want to download, and then follow the on-screen instructions. When the download is complete, the app appears on the All apps screen. Best practices After you set up and register the computer, we recommend the following steps to get the most out of your smart investment:

Back up your hard drive by creating recovery media. See Backing up, restoring, and recovering on page 49. If you havent already done so, connect to a wired or wireless network. See details in Connecting to a network on page 14. Become familiar with the computer hardware and software. For more information, see Getting to know your computer on page 4 and Enjoying entertainment features on page 19. Update or purchase antivirus software. See Using antivirus software on page 43. Visit the HP Apps Store 1 More HP resources To locate resources that provide product details, how-to information, and more, use this table. Resource Setup Instructions Help and Support To access Help and Support:

From the Start screen, type help, and then from the Search window, select Help and Support. For U.S. support, go to http://www.hp.com/go/

contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/

wwcontact_us.html. Worldwide support To get support in your language, go to http://welcome.hp.com/country/us/en/

wwcontact_us.html. Safety & Comfort Guide To access this guide:

1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Select My computer, and then select User guides. or Go to http://www.hp.com/ergo. Regulatory, Safety and Environmental Notices To access this document:

1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Select My computer, and then select User guides. Limited Warranty*

To access this document:

1. From the Start screen, type support, and then select the HP Support Assistant app. or Contents Overview of computer setup and features A broad range of how-to information and troubleshooting tips Online chat with an HP technician Support telephone numbers HP service center locations Proper workstation setup Guidelines for posture and work habits that increase your comfort and decrease your risk of injury Electrical and mechanical safety information Important regulatory notices, including information about proper battery disposal Specific warranty information about this computer 2 Chapter 1 Starting right Resource Contents From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Select My computer, and then select Warranty and services. or Go to http://www.hp.com/go/orderdocuments.

*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your computer and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited Warranty in the box. For countries/regions where the warranty is not provided in printed format, you may request a printed copy from http://www.hp.com/go/orderdocuments or write to:

North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address. IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/go/

contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. More HP resources 3 2 Getting to know your computer Locating hardware To find out what hardware is installed on your computer:

1. From the Start screen, type control panel, and then select Control Panel. or From the Windows desktop, right-click the Start button, and then select Control Panel. Select System and Security, select System, and then click Device Manager in the left column. A list displays all the devices installed on your computer. 2. For information about system hardware components and the system BIOS version number, press fn

+esc (select models only). Locating software To find out what software is installed on your computer:

From the Start screen, click the down arrow in the lower-left corner of the screen. or From the Windows desktop, right-click the Start button, and then select Programs and Features. 4 Chapter 2 Getting to know your computer Identifying components Depending on the model, your computer may have some of the following components. To see which components are specific to your model, refer to the Setup Instructions poster provided in the computer box. Component Description AC adapter light On: The AC adapter is connected and the battery is charged. Off: The computer is using battery power. or White: The computer is connected to external power and the battery is charged from 90 to 99 percent. Amber: The computer is connected to external power and the battery is charged from 0 to 90 percent. Blinking amber: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly. Off: The battery is fully charged. Accessory battery connector Connects an optional accessory battery. Action keys Execute frequently used system functions. Airplane mode key (also referred to as the wireless button) NOTE: On select models, the f5 action key turns the radiance backlight keyboard (also known as keyboard backlight) feature off or on. Turns the airplane mode and wireless feature on or off. NOTE: A wireless network must be set up before a wireless connection is possible. Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array microphone, or monaural microphone. Audio-out (headphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. WARNING! To reduce the risk of personal injury, adjust the volume before using headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. NOTE: When a device is connected to a headphone jack, the computer speakers are disabled. Identifying components 5 Component Description Audio-out (headphone)/Audio-in

(microphone) jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone. This jack does not support optional microphone-only devices. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. NOTE: When a device is connected to the jack, the computer speakers are disabled. NOTE: Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio-in (microphone). Battery bay Battery lock Holds the battery. Locks the battery in the battery bay. Battery release latch Releases the battery. Bluetooth compartment Contains a Bluetooth device. Caps lock light DisplayPort On: Caps lock is on, which switches the keys to all capital letters. Connects an optional digital display device, such as a high-

performance monitor or projector. Docking connector Connects an optional docking device. esc key Displays system information when pressed in combination with the fn key. External monitor port Connects an external VGA monitor or projector. Fingerprint reader fn key Allows a fingerprint logon to Windows, instead of a password logon. Executes frequently used system functions when pressed in combination with the esc key, or on select models, the b key or the spacebar. 6 Chapter 2 Getting to know your computer Component Description Hard drive light HDMI port Blinking white: The hard drive is being accessed. Amber: HP 3D DriveGuard has temporarily parked the hard drive. Connects an optional video or audio device, such as a high-

definition television, any compatible digital or audio component, or a high-speed High-Definition Multimedia Interface (HDMI) device. HP Triple Bass Reflex Subwoofer Provides superior bass sound. Integrated numeric keypad Internal display switch Internal microphones Left control zone Left TouchPad button Memory card reader Mute light num lock key Optical drive Power button When num lock is on, it can be used like an external numeric keypad. Turns off the display and initiates Sleep if the display is closed while the power is on. NOTE: The internal display switch is not visible from the outside of the computer. Record sound. Textured area that allows you to perform additional gestures. Functions like the left button on an external mouse. Reads optional memory cards that enable you to store, manage, share or access information. To insert a card:

Hold the card label-side up, with connectors facing the slot, insert the card into the slot, and then push in on the card until it is firmly seated. To remove a card:

Press in on the card it until it pops out. Amber: Computer sound is off. Off: Computer sound is on. Alternates between the navigational and numeric functions on the integrated numeric keypad. Depending on your computer model, reads an optical disc or reads and writes to an optical disc. NOTE: For disc compatibility information, go to the Help and Support web page (see More HP resources on page 2). Follow the web page instructions to select your computer model. Select Drivers & Downloads, and then follow the on-

screen instructions. When the computer is off, press the button to turn on the computer. When the computer is on, press the button briefly to initiate Sleep. When the computer is in the Sleep state, press the button briefly to exit Sleep. Identifying components 7 Component Description When the computer is in Hibernation, press the button briefly to exit Hibernation. CAUTION: Pressing and holding down the power button will result in the loss of unsaved information. If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button down for at least 5 seconds to turn off the computer. To learn more about your power settings, see your power options. From the Start screen, type power, select Power and sleep settings, and then select Power and sleep from the list of applications. or From the Windows desktop, right-click the Start button, and then select Power Options. Connects an AC adapter. On: The computer is on. Blinking: The computer is in the Sleep state, a power-

saving state. The computer shuts off power to the display and other components. Off: The computer is off or in Hibernation. Hibernation is a power-saving state that uses the least amount of power. Textured area that allows you to perform additional gestures. Power connector Power light Right control zone Right TouchPad button Functions like the right button on an external mouse. RJ-45 (network) jack/status lights Connects a network cable. White: The network is connected. Amber: Activity is occurring on the network. Security cable slot Attaches an optional security cable to the computer. Service door NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Provides access to the hard drive bay, the wireless local area network (WLAN) module slot, the wireless wide area network (WWAN) module slot, and the memory module slots. 8 Chapter 2 Getting to know your computer Component Description CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact support through Help and Support. From the Start screen, type help, and then select Help and Support.

- or -

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Service door release latch Releases the service door. SIM slot Speakers TouchPad light TouchPad zone USB 2.0 charging (powered) port USB 2.0 port USB 3.0 charging (powered) port USB 3.0 port Vents Supports a wireless subscriber identity module (SIM). The SIM slot is located inside the battery bay. Produce sound. On: The TouchPad is off. Reads your finger gestures to move the pointer or activate items on the screen. NOTE: The TouchPad also supports edge-swipe gestures. Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Standard USB ports will not charge all USB devices or will charge using a low current. Some USB devices require power and require you to use a powered port. NOTE: USB charging ports can also charge select models of cell phones and MP3 players, even when the computer is off. Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Standard USB ports will not charge all USB devices or will charge using a low current. Some USB devices require power and require you to use a powered port. NOTE: USB charging ports can also charge select models of cell phones and MP3 players, even when the computer is off. Connects an optional USB device, such as a keyboard, mouse, external drive, printer, scanner or USB hub. Enable airflow to cool internal components. Identifying components 9 Component Description Webcam NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. The number of vents varies depending on the computer model. It is normal for the internal fan to cycle on and off during routine operation. Records video and captures photographs. Some models allow you to video conference and chat online using streaming video. To use the webcam:

From the Start screen, type camera, and then select Camera from the list of applications. or From the Windows desktop, click the Start button, click All Programs to find your webcam software. Webcam light On: The webcam is in use. Windows application key Displays options for a selected object. Windows key Wireless light WLAN antennas WWAN antennas Returns you to the Start screen from an open app or the Windows desktop. NOTE: Pressing the Windows key again will return you to the previous screen. On: An integrated wireless device, such as a WLAN device and/or a Bluetooth device, is on. NOTE: On some models, the wireless light is amber when all wireless devices are off. Send and receive wireless signals to communicate with WLANs. NOTE: The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Send and receive wireless signals to communicate with WWANs. 10 Chapter 2 Getting to know your computer Component Description NOTE: The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Using the action keys Depending on the model, your computer may have the function key features as described in this table. An action key performs an assigned function. The icon on each of the action keys illustrates the assigned function for that key. To use an action key function, press and hold the key. CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. NOTE: The action key feature is enabled at the factory. You can disable this feature in Setup Utility

(BIOS). Refer to Help and Support for additional information. After you have disabled the action key feature, you can still perform each function by pressing the fn key in combination with the appropriate action key. Icon Description Opens Help and Support, which provides tutorials, information about the Windows operating system and your computer, answers to questions, and updates to your computer. Help and Support also provides automated troubleshooting tools and access to support. Decreases the screen brightness incrementally as long as you hold down the key. Increases the screen brightness incrementally as long as you hold down the key. Switches the screen image between display devices connected to the system. For example, if a monitor is connected to the computer, repeatedly pressing this key alternates the screen image from the computer display to the monitor display to a simultaneous display on both the computer and the monitor. Turns the radiance backlight keyboard (also known as keyboard backlight) feature off or on. NOTE: To conserve battery power, turn off this feature. Using the action keys 11 Icon Description Plays the previous track of an audio CD or the previous section of a DVD or a BD. Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD. Plays the next track of an audio CD or the next section of a DVD or a BD. Stops audio or video playback of a CD, a DVD, or a BD. Decreases speaker volume incrementally while you hold down the key. Increases speaker volume incrementally while you hold down the key. Mutes or restores speaker sound. Turns the wireless feature on or off. NOTE: A wireless network must be set up before a wireless connection is possible. Turns the airplane mode and wireless feature on or off. NOTE: The airplane mode key is also referred to as the wireless button. NOTE: A wireless network must be set up before a wireless connection is possible. Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. IMPORTANT: Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the removable service door, or on the back of the display. Service labelProvides important information to identify your computer. When contacting support, you will probably be asked for the serial number, and possibly for the product number or the model number. Locate these numbers before you contact support. Your service label will resemble one of the examples shown below. Refer to the illustration that most closely matches the service label on your computer. 12 Chapter 2 Getting to know your computer Component

(1)

(2) Serial number Product number

(3) Warranty period

(4) Model number (select models only) Microsoft Certificate of Authenticity label (select models only prior to Windows 8)Contains the Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. HP platforms with Windows 8 or Windows 8.x preinstalled do not have the physical label. Instead a Digital Product Key is electronically installed. NOTE: The Digital Product Key is automatically recognized and activated by Microsoft operating systems when a Windows 8 or Windows 8.x operating system is reinstalled using HP-

approved recovery methods. Regulatory label(s)Provide(s) regulatory information about the computer. Wireless certification label(s)Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. Labels 13 3 Connecting to a network Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Your computer may be equipped with one or more of the following wireless devices:

WLAN deviceConnects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your computer communicates with a wireless router or a wireless access point. HP Mobile Broadband ModuleGives you wireless connectivity over a wireless wide area network (WWAN), a much larger area. Mobile network operators install base stations (similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries. Bluetooth deviceCreates a personal area network (PAN) to connect to other Bluetooth-

enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close togethertypically within 10 meters (approximately 33 feet) of each other. For more information about wireless technology, the Internet, and networking, see the information and website links provided in Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Using the wireless controls You can control the wireless devices in your computer using one or more of these features:

Wireless button or wireless key (also called the airplane mode key) (referred to in this chapter as the wireless button) Operating system controls Wireless button The computer has a wireless button, one or more wireless devices, and, on select models, one or two wireless lights. All the wireless devices on your computer are enabled at the factory. If your computer has a wireless light, the wireless light is on (white) when your computer is on. The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. If the wireless light is white, at least one wireless device is on. If the wireless light is off, all wireless devices are off. 14 Chapter 3 Connecting to a network NOTE: On some models, the wireless light is amber when all wireless devices are off. Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or turn off all the wireless devices simultaneously. Operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, and diagnose and repair network problems. To use operating system controls:

1. From the Start screen, type control panel, and then select Control Panel. or From the Windows desktop, right-click the Start button, and then select Control Panel. Select Network and Internet, and then select Network and Sharing Center. 2. For more information, see the information provided in Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Connecting to a WLAN To connect to a WLAN, follow these steps:

1. Be sure that the WLAN device is on. On select models, if the device is on, the wireless light is white. If the wireless light is off, press the wireless button. NOTE: On some models, the wireless light is amber when all wireless devices are off. 2. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the display to reveal the charms. Select Settings, and then click the network status icon. Select your WLAN from the list. 3. 4. 5. Click Connect. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the code, and then click Next to complete the connection. NOTE:

If no WLANs are listed, you may be out of range of a wireless router or access point. NOTE:

If you do not see the WLAN you want to connect to, from the Windows desktop, right-

click the network status icon, and then select Open Network and Sharing Center. Click Set up a new connection or network. A list of options is displayed, allowing you to manually search for and connect to a network or to create a new network connection. Follow the on-screen instructions to complete the connection. 6. After the connection is made, place the mouse pointer over the network status icon in the notification area, at the far right of the taskbar, to verify the name and status of the connection. Connecting to a wireless network 15 NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. Using HP Mobile Broadband (select models only) HP Mobile Broadband enables your computer to use WWANs to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a mobile network operator), which in most cases is a cellular phone network operator. Coverage for HP Mobile Broadband is similar to cellular phone voice coverage. When used with a mobile network operator service, HP Mobile Broadband gives you the freedom to stay connected to the Internet, send email, or connect to your corporate network whether you are on the road or outside the range of Wi-Fi hotspots. You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband service.The serial number is printed on a label located on the bottom of your computer. Some mobile network operators require the use of a subscriber identity module (SIM). A SIM contains basic information about you, such as a personal identification number (PIN), as well as network information. Some computers include a SIM that is preinstalled in the battery bay. If the SIM is not preinstalled, it may be included with the HP Mobile Broadband documents provided with your computer, or the mobile network operator may provide it separately from the computer. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband documents included with your computer. Using Bluetooth wireless devices (select models only) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following:

Computers (desktop, notebook) Phones (cellular, cordless, smartphone) Imaging devices (printer, camera) Audio devices (headset, speakers) Mouse Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth devices. For information about configuring and using Bluetooth devices, see the Bluetooth software Help. External keyboard Connecting to a wired networkLAN (select models only) Use a LAN connection if you want to connect the computer directly to a router in your home (instead of working wirelessly), or if you want to connect to an existing network at your office. Connecting to a LAN requires an 8-pin, RJ-45 (network) cable and a network jack on the computer. To connect the network cable, follow these steps:

1. Plug the network cable into the network jack (1) on the computer. 16 Chapter 3 Connecting to a network 2. Plug the other end of the network cable into a network wall jack (2) or router. If the network cable contains noise suppression circuitry (3), which prevents NOTE:

interference from TV and radio reception, orient the circuitry end of the cable toward the computer. Sharing data and drives and accessing software When your computer is part of a network, you are not limited to using only the information that is stored in your computer. Computers connected to the network can exchange software and data with each other. For more information about sharing files, folders, or drives, see the information provided in Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. NOTE: When a disc like a DVD movie or game is copy-protected, it cannot be shared. Sharing media and data across your home group network

(select models only) Use sMedio 360 software (select models only) to share media and data between the devices on your home group network. Before you can use sMedio 360, all of your computers and mobile devices must be on the same home group network and media sharing must be enabled. NOTE: For details on how to enable media sharing on additional devices, refer to the device manufacturer's instructions. 1. To set up a home group network:

From the Start screen, click the sMedio 360 app, and then click Tutorial. To enable media sharing on your computer:

2. Sharing data and drives and accessing software 17 a. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the display to reveal the charms. Select Settings, and then click the network status icon. b. c. Right-click the network you are connected to, and then select the check box to turn on sharing. 18 Chapter 3 Connecting to a network 4 Enjoying entertainment features Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your music, and download and watch movies. Or, to make your computer an even more powerful entertainment center, connect external devices like a monitor, projector, or TV, or speakers and headphones. Using a webcam (select models only) The computer has an integrated webcam that records video and captures photographs. Some models may allow you to video conference and chat online using streaming video. To start the webcam, from the Start screen, type camera, and then select Camera from the list of applications. For details about using the webcam, go to Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Using audio On your computer, or on select models using an external optical drive, you can play music CDs, download and listen to music, stream audio content from the web (including radio), record audio, or mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio devices such as speakers or headphones. Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port or to the audio-

out (headphone) jack on your computer or on a docking station. To connect wireless speakers to your computer, follow the device manufacturer's instructions. To connect high-definition speakers to the computer, see Setting up HDMI audio on page 22. Before connecting speakers, lower the volume setting. Connecting headphones WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document, from the Start screen, type support, and then select the HP Support Assistant app. You can connect wired headphones to the headphone jack or to the audio-out (headphone)/audio-in

(microphone) combo jack on your computer. To connect wireless headphones to your computer, follow the device manufacturer's instructions. Using a webcam (select models only) 19 Connecting a microphone To record audio, connect a microphone to the microphone jack on the computer. For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. Connecting headsets WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this document, from the Start screen, type support, and then select the HP Support Assistant app. Headphones combined with a microphone are called headsets. You can connect wired headsets to the audio-out (headphone)/audio-in (microphone) jack on your computer. To connect wireless headsets to your computer, follow the device manufacturer's instructions. Using Beats Audio (select models only) Beats Audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a clear sound. You can experience Beats Audio through the computer's internal speakers, through external speakers connected to a USB port, or through Beats Audio headphones connected to the headphone jack. Accessing Beats Audio Control Panel Use Beats Audio Control Panel to view and manually control audio and bass settings. 1. From the Start screen, type control panel, select Control Panel, select Hardware and Sound, and then select Beats Audio Control Panel. or From the Windows desktop, right-click the Start button, and then select Control Panel. Select Hardware and Sound, and then select Beats Audio Control Panel. 2. Enabling and disabling Beats Audio To enable or disable Beats Audio, press the fn key in combination with the b key. Using video Your computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer when you are not connected to a network. To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external monitor, projector, or TV. IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information on using your video features, refer to Help and Support. 20 Chapter 4 Enjoying entertainment features Connecting video devices by using a VGA cable (select models only) NOTE: To connect a VGA video device to your computer, you need an VGA cable, purchased separately. To see the computer screen image on an external VGA monitor or projected for a presentation, connect a monitor or projector to the computer's VGA port. 1. Connect the VGA cable from the monitor or projector to the VGA port on the computer as shown. 2. Press f4 to alternate the screen image between 4 display states:

PC Screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. From the Start screen, type control panel, and then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust screen resolution. Connecting video devices using an HDMI cable (select models only) NOTE: To connect an HDMI device to your computer, you need an HDMI cable, purchased separately. To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the following instructions:

1. Connect one end of the HDMI cable to the HDMI port on the computer. Using video 21 2. Connect the other end of the cable to the high-definition TV or monitor. 3. Press f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. From the Start screen, type control panel, and then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust screen resolution. Setting up HDMI audio HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the computer, you can then turn on HDMI audio by following these steps:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. 2. On the Playback tab, select the name of the digital output device. 3. Click Set Default, and then click OK. To return the audio stream to the computer speakers:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click Playback devices. 2. On the Playback tab, click Speakers. 3. Click Set Default, and then click OK. 22 Chapter 4 Enjoying entertainment features Connecting digital display devices using a DisplayPort cable (select models only) NOTE: To connect a digital display device to your computer, you need a DisplayPort (DP-DP) cable, purchased separately. The DisplayPort connects a digital display device such as a high-performance monitor or projector. The DisplayPort delivers higher performance than the VGA external monitor port and improves digital connectivity. 1. Connect one end of the DisplayPort cable to the DisplayPort on the computer. 2. Connect the other end of the cable to the digital display device. 3. Press f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the same screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. From the Start screen, type control panel, and then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust screen resolution. Using video 23 Connecting Miracast-compatible wireless displays (select models only) To discover and connect to Miracast-compatible wireless displays, follow the steps below. To open Miracast:

Point to the upper-right or lower-right corner of the Start screen or the Windows desktop to display the charms, click Devices, click Project, and then follow the on-screen instructions. or On select computer models, from the Start screen, click the HP Quick Access to Miracast icon, and then follow the on-screen instructions. 24 Chapter 4 Enjoying entertainment features 5 Navigating the screen To quickly return to the Start screen, press the Windows key on a keyboard or the Windows button on a tablet. You can navigate the computer screen in the following ways:

Touch gestures Keyboard and optional mouse (purchased separately) NOTE: An external USB mouse (purchased separately) can be connected to a USB ports on the computer. Using the TouchPad and touch screen gestures The TouchPad helps you navigate the computer screen and control the pointer using simple touch gestures. To navigate the touchscreen, you can use the left and right TouchPad buttons as you would use the corresponding buttons on an external mouse. You can also customize gestures and view demonstrations of how they work. From the Start screen, type control panel, select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. NOTE: Most of the gestures shown here can be used on either the TouchPad or touchscreen. TouchPad gestures are not supported in all apps. Tap Use the tap/double-tap gesture to select or open an item on the screen. Point to an item on the screen, and then tap one finger on the TouchPad zone select it. Double-

tap an item to open it. Two-finger scroll Use the two-finger scroll gesture to move up, down, or sideways on a page or image. Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or right. Using the TouchPad and touch screen gestures 25 Two-finger pinch zoom Use the two-finger pinch zoom to zoom out or in on images or text. Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers together. Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers apart. Two-finger click Use the two-finger click gesture to open the menu for an object on the screen. NOTE: The two-finger click performs the same function as right-clicking with the mouse. Place two fingers on the TouchPad zone and press down to open the options menu for the selected object. Right-edge swipe Use the right-edge swipe to reveal the charms, which let you search, share, start apps, access devices, or change settings. Gently swipe your finger inward from the right edge of the TouchPad to reveal the charms. 26 Chapter 5 Navigating the screen Left-edge swipe Use the left-edge swipe to reveal your open apps so that you can access them quickly. Gently swipe your finger inward from the left edge of the TouchPad to switch between apps. Without lifting your finger, swipe back toward the left edge to reveal all open apps. Top-edge swipe and bottom-edge swipe Use the top-edge swipe or bottom-edge swipe to display command options that allow you to customize an open app. IMPORTANT: When an app is open, the top-edge swipe varies depending on the app. Gently swipe your finger from the top edge or the bottom edge to reveal the app command options. One-finger slide (touch screen only) Use the one-finger slide to pan or scroll through lists and pages, or to move an object. To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. To drag, press and hold an object, and then drag the object to move it. Using the TouchPad and touch screen gestures 27 Using a keyboard and optional mouse A keyboard and optional external mouse allow you to type, select items, scroll, and perform similar functions as you do touch gestures. For details, refer to Getting to know your computer on page 4. TIP: The Windows key on a tablet allow you to quickly return to the Start screen from an open app or the Windows desktop. Press the button or key again to return to the previous screen. on a keyboard or the Windows button 28 Chapter 5 Navigating the screen 6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power only and an AC power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Initiating and exiting Sleep and Hibernation Windows has two power-saving states, Sleep and Hibernation. SleepThe Sleep state is automatically initiated after a period of inactivity. Your work is saved to memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more information, see Manually initiating and exiting Sleep on page 30. HibernationThe Hibernation state is automatically initiated if the battery reaches a critical level. In the Hibernation state, your work is saved to a hibernation file and the computer powers down. You can also initiate Hibernation manually. For more information, see Manually initiating and exiting Hibernation (select models only) on page 30. CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate the Sleep state while reading from or writing to a disc or an external media card. NOTE: You cannot initiate any type of networking connection or perform any computer functions while the computer is in the Sleep state or in the Hibernation state. Initiating and exiting Sleep and Hibernation 29 Manually initiating and exiting Sleep You can initiate Sleep in any of the following ways:

Close the display. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the screen to reveal the charms. Click Settings, click the Power icon, and then click Sleep. You can exit Sleep in any of the following ways:

Briefly press the power button. If the computer is closed, raise the display. Press a key on the keyboard. Tap or swipe the TouchPad. When the computer exits Sleep, the power lights turn on and your work returns to the screen. NOTE:

password before your work returns to the screen. If you have set a password to be required on exiting Sleep, you must enter your Windows Manually initiating and exiting Hibernation (select models only) You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. From the Start screen, type power options, and then select Power options. or From the Windows desktop, right-click the Start button, and then click Power Options. In the left pane, click Choose what the power button does. In the When I press the power button area, select Hibernate. 2. 3. Click Change Settings that are currently unavailable. 4. 5. Click Save changes. To exit Hibernation:

Briefly press the power button. When the computer exits Hibernation, the power lights turn on and your work returns to the screen. NOTE:

Windows password before your work returns to the screen. If you have set a password to be required on exiting Hibernation, you must enter your Setting password protection on wakeup (exiting Sleep or Hibernation) To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow these steps:

1. From the Start screen, type power options, and then select Power options. or From the Windows desktop, right-click the Start button, and then click Power Options. In the left pane, click Require a password on wakeup. 2. 30 Chapter 6 Managing power 3. Click Change Settings that are currently unavailable. 4. Click Require a password (recommended). NOTE:

If you need to create a user account password or change your current user account password, click Create or change your user account password, and then follow the on-screen instructions. If you do not need to create or change a user account password, go to step 5. 5. Click Save changes. Using the power meter and power settings The power meter is located on the Windows desktop. The power meter allows you to quickly access power settings and view the remaining battery charge. To view the percentage of remaining battery charge and the current power plan, place the mouse pointer over the power meter icon. To use Power Options, click the power meter icon and select an item from the list. From the Start screen, you can also type power options, and then select Power Options. Different power meter icons indicate whether the computer is running on battery or external power. Placing the mouse pointer over the icon reveals a message if the battery has reached a low or critical battery level. Running on battery power When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. When the computer is off and unplugged from external power, the battery in the computer slowly discharges. The computer will display a message when the battery reaches a low or critical battery level. Computer battery life varies, depending on power management settings, programs running on the computer, screen brightness, external devices connected to the computer, and other factors. Factory-sealed battery (select products only) To monitor the status of the battery, or if the battery is no longer holding a charge, run Battery Check in the HP Support Assistant app. 1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Select Battery and performance. If Battery Check indicates that your battery should be replaced, contact support. 2. The battery(ies) in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. The battery[ies] in this product cannot be easily replaced by user themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Using the power meter and power settings 31 User-replaceable battery (select models only) WARNING! To reduce potential safety issues, use only the user-replaceable battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a user-replaceable battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work or shut down the computer through Windows before removing the battery. To remove the user-replaceable battery (select models only), refer to the steps and illustration that most closely match your computer:

1. 2. Turn the computer upside down on a flat surface. Slide the battery release latch (1) to release the battery. NOTE: The battery release latch automatically returns to its original position. 3. Remove the battery from the computer (2). or 1. 2. Turn the computer upside down on a flat surface. Slide the battery release latch (1) to release the battery. NOTE: The battery release latch automatically returns to its original position. 3. Pivot the battery upward (2), and then remove it from the computer (3). Finding battery information To access battery information:

1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Select Battery and Performance. 2. 32 Chapter 6 Managing power HP Support Assistant provides the following tools and information about the battery:

Battery Check Information about battery types, specifications, life cycles, and capacity Conserving battery power To conserve battery power and maximize battery life:

Lower the brightness of the display. Select the Power saver setting in Power Options. If the computer will be unused and unplugged from external power for more than 2 weeks, remove the user-replaceable battery from the computer and store it separately in a cool, dry place. Turn off wireless devices when you are not using them. Disconnect unused external devices that are not plugged into an external power source, such as an external hard drive connected to a USB port. Stop, disable, or remove any external media cards that you are not using. Before you leave your work, initiate Sleep or shut down the computer. Resolving a low battery level Resolving a low battery level when external power is available Connect one of the following to the computer and to external power:

AC adapter Optional docking or expansion device Optional power adapter purchased as an accessory from HP Resolving a low battery level when no power source is available Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation 1. Replace the discharged user-replaceable battery with a charged battery, or connect the AC adapter to the computer and to external power. Exit Hibernation by pressing the power button. 2. Storing a user-replaceable battery (select models only) CAUTION: To reduce the risk of damage to a battery, do not expose it to high temperatures for extended periods of time. If a computer will be unused and unplugged from external power for more than 2 weeks, remove the battery and store it separately in a cool, dry place to prolong the battery charge. A stored battery should be checked every 6 months. If the capacity is less than 50 percent, recharge the battery before returning it to storage. Running on battery power 33 Disposing of a user-replaceable battery (select models only) WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. See the Regulatory, Safety and Environmental Notices for proper battery disposal. To access this document:

From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Running on AC power For information about connecting to AC power, refer to the Setup Instructions poster provided in the computer box. The computer does not use battery power when the computer is connected to AC power with an approved AC adapter or an optional docking/expansion device. WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. Connect the computer to AC power under any of the following conditions:

WARNING! Do not charge the computer battery while you are aboard aircraft. When charging or calibrating a battery When installing or modifying system software When writing information to a disc (select models only) When running Disk Defragmenter on computers with internal hard drives When performing a backup or recovery When you connect the computer to AC power:

The battery begins to charge. The screen brightness increases. The power meter icon on the Windows desktop changes appearance. When you disconnect AC power:

The computer switches to battery power. The screen brightness automatically decreases to save battery life. The power meter icon on the Windows desktop changes appearance. 34 Chapter 6 Managing power Troubleshooting power problems Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC power:

The computer does not turn on. The display does not turn on. The power lights do not turn on. To test the AC adapter:

1. 2. Connect the AC adapter to the computer, and then plug it into an AC outlet. 3. Shut down the computer. Turn on the computer. If the power lights turn on, the AC adapter is working properly. If the power lights remain off, check the connection from the AC adapter to the computer and the connection from the AC adapter to the AC outlet to be sure that the connections are secure. If the connections are secure and the power lights remain off, the AC adapter is not functioning and should be replaced. Contact support for information about obtaining a replacement AC power adapter. Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and computer. Shut down the computer under any of the following conditions:

When you are connecting an external hardware device that does not connect to a USB or video port When the computer will be unused and disconnected from external power for an extended period Although you can turn off the computer with the power button, the recommended procedure is to use the Windows Shut down command. If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by NOTE:

briefly pressing the power button. 1. 2. Save your work and close all open programs. From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of the screen to reveal the charms. 3. Click Settings, click the Power icon, and then click Shut down. or Shutting down (turning off) the computer 35 Right-click the Start button in the lower-left corner of the screen, select Shut down or sign out, and then select Shut down. If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:

Press ctrl+alt+delete, click the Power icon, and then select Shut Down. Press and hold the power button for at least 5 seconds. Disconnect the computer from external power. On models with a user-replaceable battery, remove the battery. 36 Chapter 6 Managing power 7 Maintaining your computer It is important to perform regular maintenance to keep your computer in optimal condition. This chapter explains how to use tools like Disk Defragmenter and Disk Cleanup. It also provides instructions for updating programs and drivers, steps to clean the computer, and tips for traveling with

(or shipping) the computer. Improving performance You can improve the performance of your computer by performing regular maintenance tasks with tools such as Disk Defragmenter and Disk Cleanup. Using Disk Defragmenter HP recommends using Disk Defragmenter to defragment your hard drive at least once a month. NOTE:

It is not necessary to run Disk Defragmenter on solid-state drives. To run Disk Defragmenter:

1. Connect the computer to AC power. 2. 3. For additional information, access the Disk Defragmenter software Help. From the Start screen, type defragment, and then select Defragment and optimize your drives. Follow the on-screen instructions. Using Disk Cleanup Use Disk Cleanup to search the hard drive for unnecessary files that you can safely delete to free up disk space and help the computer run more efficiently. To run Disk Cleanup:

1. From the Start screen, type disk, and then select one of the following:

Free up disk space on this PC Uninstall apps to free up disk space Free up disk space by deleting uncessary files Follow the on-screen instructions. 2. Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis. Updates can resolve issues and bring new features and options to your computer. For example, older graphics components might not work well with the most recent gaming software. Without the latest driver, you would not be getting the most out of your equipment. Go to http://www.hp.com/support to download the latest versions of HP programs and drivers. In addition, register to receive automatic notifications when updates become available. Improving performance 37 If you would like to update your programs and drivers, follow these instructions:

1. From the Start screen, type support, and then select the HP Support Assistant app.

-or-

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Click Updates and tune-ups, and then click Check for HP updates now. 3. Follow the on-screen instructions. Cleaning your computer Use the following products to safely clean your computer:

Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (for example, disposable wipes, which come in a variety of brands) Alcohol-free glass-cleaning fluid Solution of water and mild soap Dry microfiber cleaning cloth or a chamois (static-free cloth without oil) Static-free cloth wipes CAUTION: Avoid strong cleaning solvents that can permanently damage your computer. If you are not sure that a cleaning product is safe for your computer, check the product contents to make sure that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product. Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and cleaning agents can get trapped in the scratches. Cleaning procedures Follow the procedures in this section to safely clean your computer. WARNING! To prevent electric shock or damage to components, do not attempt to clean your computer while it is on. Turn off the computer. 1. 2. Disconnect AC power. 3. Disconnect all powered external devices. CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on any computer surface. Liquids dripped on the surface can permanently damage internal components. Cleaning the display Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that a display is dry before you close the computer. 38 Chapter 7 Maintaining your computer Cleaning the sides or cover To clean the sides or cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously, or use an acceptable disposable wipe. NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and debris. Cleaning the TouchPad, keyboard, or mouse (select models only) WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. CAUTION: To prevent damage to internal components, do not allow liquids to drip between the keys. To clean the TouchPad, keyboard, or mouse, use a soft microfiber cloth or a chamois moistened with one of the cleaning solutions listed previously or use an acceptable disposable wipe. To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a can of compressed air with a straw extension. Traveling with or shipping your computer If you have to travel with or ship your computer, follow these tips to keep your equipment safe. Prepare the computer for traveling or shipping:

Back up your information to an external drive. Remove all discs and all external media cards, such as memory cards. Turn off and then disconnect all external devices. Shut down the computer. Take along a backup of your information. Keep the backup separate from the computer. When traveling by air, carry the computer as hand luggage; do not check it in with the rest of your luggage. CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you are allowed to use your computer. In-flight computer use is at the discretion of the airline. If you are shipping the computer or a drive, use suitable protective packaging and label the package FRAGILE. The use of wireless devices may be restricted in some environments. Such restrictions may apply aboard aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that applies to the use of a wireless device in your computer, ask for authorization to use your computer before you turn it on. If you are traveling internationally, follow these suggestions:

Traveling with or shipping your computer 39 Check the computer-related customs regulations for each country or region on your itinerary. Check the power cord and adapter requirements for each location in which you plan to use the computer. Voltage, frequency, and plug configurations vary. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. 40 Chapter 7 Maintaining your computer 8 Securing your computer and information Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, the non-Windows Setup Utility (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code. IMPORTANT: Some security features listed in this chapter may not be available on your computer. Using passwords A password is a group of characters that you choose to secure your computer information and to protect online transactions. Several types of passwords can be set. For example, when you set up your computer for the first time, you were asked to create a user password to secure your computer. Additional passwords can be set in Windows or in the HP Setup Utility (BIOS) that is preinstalled on your computer. You may find it helpful to use the same password for a Setup Utility (BIOS) feature and for a Windows security feature. To create and save passwords, use the following tips:

To reduce the risk of being locked out of the computer, record each password and store it in a secure place away from the computer. Do not store passwords in a file on the computer. When creating passwords, follow requirements set by the program. Change your passwords at least every 3 months. An ideal password is long and has letters, punctuation, symbols, and numbers. Before you send your computer for service, back up your files, delete confidential files, and then remove all password settings. For additional information about Windows passwords, such as screen-saver passwords:

From the Start screen, type support, and then select the HP Support Assistant app.

-or-

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Setting Windows passwords Password User password Administrator password Function Protects access to a Windows user account. Protects administrator-level access to computer contents. NOTE: This password cannot be used to access Setup Utility (BIOS) contents. Using passwords 41 Setting Setup Utility (BIOS) passwords Password Administrator password Power-on password Function Must be entered each time you access Setup Utility

(BIOS). If you forget your administrator password, you cannot access Setup Utility (BIOS). Must be entered each time you turn on or restart the computer. If you forget your power-on password, you cannot turn on or restart the computer. To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):

If you have tablet with a detachable keyboard or keyboard dock, attach it before beginning NOTE:

these steps. 1. Start Setup Utility (BIOS):

Turn on or restart the computer, quickly press esc, and then press f10. 2. Use the arrow keys to select Security, and then follow the on-screen instructions. Your changes take effect when the computer restarts. Using the fingerprint reader (select models only) Integrated fingerprint readers are available on select computer models. NOTE: For the location of the fingerprint reader on your computer, see Identifying components on page 5. To use the fingerprint reader, you must set up a user account and password on the computer and then register one or more fingerprints using HP SimplePass software. To register fingerprints with HP SimplePass:

1. Swipe a finger on the fingerprint sensor to launch HP SimplePass. or From the Start screen, type simple, and then select HP SimplePass. 2. When the HP SimplePass welcome screen is revealed, click Get Started. 3. HP SimplePass prompts you to swipe your right index finger over the sensor. 4. Swipe your finger 3 times to finish the registration. If registration is successful, a green circle appears on the corresponding finger in the illustration. 5. Repeat steps 1 through 4 to register an additional fingerprint. Using Internet security software When you use your computer to access email, a network, or the Internet, you potentially expose your computer to computer viruses, spyware, and other online threats. To help protect your computer, 42 Chapter 8 Securing your computer and information Internet security software that includes antivirus and firewall features may be preinstalled on your computer as a trial offer. To provide ongoing protection against newly discovered viruses and other security risks, security software must be kept up to date. It is strongly recommended that you upgrade the security software trial offer or purchase the software of your choice in order to fully protect your computer. Using antivirus software Computer viruses can disable programs, utilities, or the operating system, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. An antivirus program may be preinstalled on your computer. It is strongly recommended that you use the antivirus program of your choice in order to fully protect your computer. For more information about computer viruses, from the Start screen, type support, and then select the HP Support Assistant app, or from the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be software you install on your computer and/or network, or it can be a combination of both hardware and software. There are two types of firewalls to consider:

Host-based firewallsSoftware that protects only the computer it is installed on. Network-based firewallsInstalled between your DSL or cable modem and your home network to protect all the computers on the network. When a firewall is installed on a system, all data sent to and from the system is monitored and compared with a set of user-defined security criteria. Any data that does not meet those criteria is blocked. Installing software updates HP, Windows, and third-party software installed on your computer should be regularly updated to correct security problems and improve software performance. For more information, see Updating programs and drivers on page 37. Installing critical security updates CAUTION: Microsoft sends out alerts regarding critical updates. To protect the computer from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. You can install these updates manually or automatically. To view or change the settings:

1. From the Start screen, type control panel. or Installing software updates 43 2. From the Windows desktop, right-click the Start button, and then select Control Panel. Select System and Security, select Windows Update, select Change settings, and then follow the on-screen instructions. Securing your wireless network When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and airports may not provide any security. Backing up your software applications and information Regularly back up your software applications and information to protect them from being permanently lost or damaged through a virus attack or a software or hardware failure. For more information, see Backing up, restoring, and recovering on page 49. Using an optional security cable lock A security cable lock, purchased separately, is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Security cable locks are only one of several methods that should be employed as part of a complete security solution to help maximize theft protection. The security cable slot on your computer may look slightly different from the illustration in this section. For the location of the security cable slot on your computer, see Getting to know your computer on page 4. 1. 2. 3. Loop the security cable lock around a secured object. Insert the key (1) into the security cable lock (2). Insert the security cable lock into the security cable slot on the computer (3), and then lock the security cable lock with the key. 4. Remove the key and keep it in a safe place. 44 Chapter 8 Securing your computer and information 9 Using Setup Utility (BIOS) Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory. Starting Setup Utility (BIOS) CAUTION: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the computer from operating properly. NOTE:

these steps. Turn on or restart the computer, quickly press esc, and then press f10. If you have tablet with a detachable keyboard or keyboard dock, attach it before beginning Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version Start Setup Utility (BIOS) (see Starting Setup Utility (BIOS) on page 45). To determine whether available BIOS updates contain later BIOS versions than the one currently installed on the computer, you need to know the version of the system BIOS that is installed. BIOS version information (also known as ROM date and System BIOS) can be revealed by pressing fn+esc (if you are already in Windows) or by using Setup Utility (BIOS). 1. 2. Use the arrow keys to select Main, and then make note of your BIOS version. To exit Setup Utility (BIOS):

1. Use the arrow keys to select Exit, select Exit Discarding Changes, and then press enter. 2. Select Yes. Starting Setup Utility (BIOS) 45 Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet. Do not shut down the computer or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. If your computer is connected to a network, consult the network administrator before NOTE:

installing any software updates, especially system BIOS updates. 1. From the Start screen, type support, and then select the HP Support Assistant app. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. 2. Click Updates and tune-ups, and then click Check for HP updates now. 3. 4. Follow the on-screen instructions. At the download area, follow these steps:

a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. If the update is more recent than your BIOS, make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. Follow the on-screen instructions to download your selection to the hard drive. If the update is more recent than your BIOS, make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update. b. BIOS installation procedures vary. Follow any instructions that appear on the screen after the download is complete. If no instructions appear, follow these steps:

1. From the Start screen, type file, and then select File Explorer. or From the Windows desktop, right-click the Start button, and then select File Explorer. 2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:). 3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the update. 4. Double-click the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. 5. Complete the installation by following the on-screen instructions. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. 46 Chapter 9 Using Setup Utility (BIOS) 10 Using HP PC Hardware Diagnostics

(UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components. To start HP PC Hardware Diagnostics (UEFI):

1. Turn on or restart the computer, quickly press esc, and then press f2. The BIOS searches 3 places for the diagnostic tools, in the following order:

a. Connected USB drive NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 47. b. Hard drive c. BIOS 2. When the diagnostic tool opens, use the keyboard arrow keys to select the type of diagnostic test you want to run, and then follow the on-screen instructions. NOTE:

If you need to stop a diagnostic test, press esc. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English NOTE:

only. There are two options to download HP PC Hardware Diagnostics to a USB device:

Option 1: HP PC Diagnostics homepage Provides access to the latest UEFI version 1. Go to http://hp.com/go/techcenter/pcdiags. 2. Click the UEFI Download link, and then select Run. Option 2: Support and Drivers pagesProvide downloads for a specific product for earlier and later versions 1. Go to http://www.hp.com. 2. 3. Point to Support, located at the top of the page, and then click Download Drivers. In the text box, enter the product name, and then click Go. or Click Find Now to let HP automatically detect your product. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 47 4. 5. Select your computer model, and then select your operating system. In the Diagnostic section, click HP UEFI Support Environment. or Click Download, and then select Run. 48 Chapter 10 Using HP PC Hardware Diagnostics (UEFI) 11 Backing up, restoring, and recovering This chapter provides information about the following processes. The information in the chapter is standard procedure for most models. Creating recovery media and backups Restoring and recovering your system For additional information, refer to the HP Support Assistant. From the Start screen, type support, and then select the HP Support Assistant app.

- or -

From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. Creating recovery media and backups (select models only) Use HP Recovery Manager after you successfully set up the computer, to create HP Recovery media. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. For information on creating recovery media, see Creating HP Recovery media (select models only) on page 49. For information on the recovery options that are available using the recovery media, see Recovering using HP Recovery Manager (select models only) on page 51 Use Windows tools to create system restore points and create backups of personal information. Creating HP Recovery media (select models only) HP Recovery Manager is a software program that allows you to create recovery media after you successfully set up the computer. HP Recovery media can be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the original operating system and the software programs installed at the factory and then configures the settings for the programs. HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive. Only one set of HP Recovery media can be created. Handle these recovery tools carefully, and keep them in a safe place. HP Recovery Manager examines the computer and determines the required storage capacity for the blank USB flash drive or the number of blank DVD discs that will be required. To create recovery discs, your computer must have an optical drive with DVD writer capability, and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use rewritable discs such as CDRW, DVDRW, double-layer DVDRW, or BD-RE

(rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or, instead, you can use a high-quality blank USB flash drive. If your computer does not include an integrated optical drive with DVD writer capability, but you would like to create DVD recovery media, you can use an external optical drive (purchased separately) to create recovery discs, or you can obtain recovery discs for your computer from Creating recovery media and backups (select models only) 49 support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website. Go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. If you use an external optical drive, it must be connected directly to a USB port on the computer; the drive cannot be connected to a USB port on an external device, such as a USB hub. Be sure that the computer is connected to AC power before you begin creating the recovery media. The creation process can take an hour or more. Do not interrupt the creation process. If necessary, you can exit the program before you have finished creating all of the recovery DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery Manager, you will be prompted to continue, and the remaining discs will be burned. From the Start screen, type recovery, and then select HP Recovery Manager. Select Recovery Media Creation, and then follow the on-screen instructions. To create HP Recovery media:

1. 2. If you ever need to recover the system, see Recovering using HP Recovery Manager (select models only) on page 51. Using Windows tools You can create system restore points and create backups of personal information using Windows tools. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. For more information and steps, see Help and Support. Restore and recover (select models only) There are several options for recovering your system. Choose the method that best matches your situation and level of expertise:

Windows offers several options for restoring from backup, refreshing the computer, and resetting the computer to its original state. For more information and steps, see Help and Support. From the Start screen, type help, and then select Help and Support. or From the Windows desktop, click the question mark icon in the notification area, at the far right of the taskbar. On select models, if you need to correct a problem with a preinstalled application or driver, use the Drivers and Applications Reinstall option of HP Recovery Manager to reinstall the individual application or driver. From the Start screen, type recovery, select HP Recovery Manager, select Drivers and Applications Reinstall, and then follow the on-screen instructions. 50 Chapter 11 Backing up, restoring, and recovering On select models, if you want to reset your computer using a minimized image, you can choose the HP Minimized Image Recovery option from the HP Recovery partition or HP Recovery media. Minimized Image Recovery installs only drivers and hardware-enabling applications. Other applications included in the image continue to be available for installation through the Drivers and Applications Reinstall option in HP Recovery Manager. For more information, see Recovering using HP Recovery Manager (select models only) on page 51. On select models, if you want to recover the computer's original factory partitioning and content, you can choose the System Recovery option from the HP Recovery partition or use the HP Recovery media that you have created. For more information, see Recovering using HP Recovery Manager (select models only) on page 51. If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 49. On select models, if you have replaced the hard drive, you can use the Factory Reset option of HP Recovery media to restore the factory image to the replacement drive. For more information, see Recovering using HP Recovery Manager (select models only) on page 51. Recovering using HP Recovery Manager (select models only) HP Recovery Manager software allows you to recover the computer to its original factory state by using the HP Recovery media that you created or by using the HP Recovery partition (select models only). If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 49. Using HP Recovery media, you can choose from one of the following recovery options:

System RecoveryReinstalls the original operating system, and then configures the settings for the programs that were installed at the factory. Minimized Image Recovery (select models only)Reinstalls the operating system and all hardware-related drivers and software, but not other software applications. Factory Reset (select models only)Restores the computer to its original factory state by deleting all information from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that was installed at the factory. The HP Recovery partition (select models only) allows System Recovery and Minimized Image Recovery. What you need to know HP Recovery Manager recovers only software that was installed at the factory. For software not provided with the computer, you must either download the software from the manufacturer's website or reinstall the software from the media provided by the manufacturer. IMPORTANT: Recovery through HP Recovery Manager should be used as a final attempt to correct computer issues. HP Recovery media (select models only) must be used if the computer hard drive fails. If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 49. To use the Factory Reset option, you must use HP Recovery media (select models only). If you have not already created recovery media, see Creating HP Recovery media (select models only) on page 49. If the HP Recovery media (select models only) does not work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the Restore and recover (select models only) 51 computer. You can also find contact information from the HP website. Go to http://www.hp.com/

support, select your country or region, and follow the on-screen instructions. IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before beginning recovery, back up any personal data you want to retain. Using the HP Recovery partition (select models only) The HP Recovery partition (select models only) allows you to perform a system recovery or minimized image recovery without the need for recovery discs or a recovery USB flash drive. This type of recovery can be used only if the hard drive is still working. To start HP Recovery Manager from the HP Recovery partition:

1. From the Start screen, type recovery, select Recovery Manager, and then select HP Recovery Environment. Select Troubleshoot from the boot options menu. Select Recovery Manager, and then follow the on-screen instructions. 2. 3. Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly. 1. 2. If possible, back up all personal files. Insert the HP Recovery media that you created, and then restart the computer. If the computer does not automatically restart in HP Recovery Manager, change the NOTE:

computer boot order. See Changing the computer boot order on page 52. Follow the on-screen instructions. 3. Changing the computer boot order If the computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices where the computer searches for startup information. You can specify that an optical drive or a USB flash drive should be checked first. To change the boot order:

1. 2. Restart the computer, quickly press esc, and then press f9 for boot options. 3. 4. Select the optical drive or USB flash drive you want to boot from. Follow the on-screen instructions. Insert the HP Recovery media you created. 52 Chapter 11 Backing up, restoring, and recovering 12 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100240 V, 5060 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source that is supplied and approved by HP for use with this computer. The computer can operate on DC power within the following specifications. Operating voltage and current varies by platform.The voltage and current for your computer is located on the regulatory label. Input power Rating Operating voltage and current 5 V dc @ 2 A / 12 V dc @ 3 A /15 V dc @ 3 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 3.75 A /15 V dc @ 3 A 45W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 3.75 A / 12 V dc @ 3.75 A / 15 V dc @ 3 A /

20 V dc @ 2.25 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 5 A / 15 V dc @ 4.33 A / 20 V dc @ 3.25 A 65 W USB-C 5 V dc @ 3 A / 9 V dc @ 3A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc @ 4.33 A / 20 V dc @ 3.25 A 65 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc @ 5 A / 20 V dc @ 4.5 A 90 W USB-C 19.5 V dc @ 2.31 A 45 W 19.5 V dc @ 3.33 A 65 W 19.5 V dc @ 4.62 A 90 W 19.5 V dc @ 6.15 A 120 W 19.5 V dc @ 6.9 A 135 W 19.5 V dc @ 7.70 A 150 W 19.5 V dc @ 10.3 A 200 W 19.5 V dc @ 11.8 A 230 W NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. NOTE: The computer operating voltage and current can be found on the system regulatory label. Input power 53 Operating environment Factor Temperature Operating Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Metric U.S. 5C to 35C

-20C to 60C 10% to 90%

5% to 95%

41F to 95F

-4F to 140F 10% to 90%

5% to 95%

Operating Nonoperating

-15 m to 3,048 m

-15 m to 12,192 m

-50 ft to 10,000 ft

-50 ft to 40,000 ft 54 Chapter 12 Specifications 13 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contactfor example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:

If removal or installation instructions direct you to unplug the computer, first be sure that it is properly grounded. Keep components in their electrostatic-safe containers until you are ready to install them. Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. Use nonmagnetic tools. Before handling components, discharge static electricity by touching an unpainted metal surface. If you remove a component, place it in an electrostatic-safe container. 55 Index A AC adapter light, identifying 5 AC adapter, testing 35 accessory battery connector, identifying 5 action keys 11 identifying 5 airplane mode key 5, 12 antivirus software, using 43 audio-in (microphone), identifying 5 audio-out (headphone), identifying 5 audio-out (headphone)/audio-in

(microphone) jack, identifying 6 B backing up software and information 44 backups 49 battery conserving power 33 discharging 33 disposing 34 factory-sealed 31 finding information 32 resolving low battery level 33 storing 33 user-replaceable 32 battery bay, identifying 6 battery information, finding 32 battery lock, identifying 6 battery power 31 battery release latch, identifying 6 battery temperature 33 bay, battery 6 Beats Audio 20 Beats Audio Control Panel 20 Beats Audio hot key 20 best practices 1 BIOS determining version 45 downloading an update 46 56 Index starting the Setup Utility 45 updating 45 Bluetooth compartment, identifying 6 Bluetooth device 14, 16 Bluetooth label 13 boot order changing 52 bottom 13 buttons left TouchPad 7 power 7 right TouchPad 8 C caps lock light, identifying 6 caring for your computer 38 cleaning your computer 38 components 5 computer, traveling 33 connecting to a WLAN 15 connector, power 8 control zone left 7 right 8 corporate WLAN connection 15 critical security updates, installing 43 D deleted files, restoring 50 Disk Cleanup software 37 Disk Defragmenter software 37 DisplayPort connecting 23 identifying 6 docking connector, identifying 6 E electrostatic discharge 55 esc key, identifying 6 external AC power, using 34 external monitor port 21 external monitor port, identifying 6 F fingerprint reader identifying 6 using 42 fingerprints, registering 42 firewall software 43 fn key, identifying 6 G getting to know your computer 4 H hard drive light, identifying 7 HDMI port connecting 21 identifying 7 HDMI, configuring audio 22 headphones, connecting 19 headsets, connecting 20 Hibernation exiting 30 initiating 30 high-definition devices, connecting 21, 23, 24 HP Apps Store, visiting 1 HP PC Hardware Diagnostics

(UEFI) downloading 47 HP Recovery Manager correcting boot problems 52 starting 52 HP Recovery media creating 49 recovery 52 HP Recovery partition recovery 52 HP resources 2 HP Triple Bass Reflex Subwoofer, identifying 7 I initiating Sleep and Hibernation 29 input power 53 installing critical security updates 43 optional security cable lock 44 integrated numeric keypad, identifying 7 internal display switch, identifying 7 internal microphones, identifying 7 Internet security software, using 42 J jacks audio-in (microphone) 5 audio-out (headphone) 5 audio-out (headphone)/audio-in

(microphone) 6 network 8 RJ-45 (network) 8 K keyboard and mouse, using 28 keys action 5 airplane mode 5, 12 esc 6 fn 6 num lock 7 Windows 10 Windows applications 10 L labels Bluetooth 13 Microsoft Certificate of Authenticity 13 regulatory 13 serial number 12 service 12 wireless certification 13 WLAN 13 latches battery release 6 service door release 9 left control zone, identifying 7 left-edge swipe TouchPad and touch screen gesture 27 lights AC adapter 5 caps lock 6 hard drive 7 mute 7 power 8 RJ-45 (network) status 8 TouchPad 9 webcam 10 wireless 10 locating information hardware 4 software 4 M maintenance Disk Cleanup 37 Disk Defragmenter 37 updating programs and drivers 37 memory card reader, identifying 7 memory card, identifying 7 microphone, connecting 20 minimized image recovery 52 minimized image, creating 51 Miracast 24 mouse, external setting preferences 25 mute light, identifying 7 N network jack, identifying 8 num lock key, identifying 7 O one-finger slide touch screen gesture 27 operating environment 54 optical drive, identifying 7 original system recovery 51 P passwords ports Setup Utility (BIOS) 42 Windows 41 DisplayPort 6 external monitor 6, 21 HDMI 7, 21, 23 Miracast 24 USB 2.0 9 USB 2.0 charging (powered) 9 USB 3.0 9 USB 3.0 (powered) charging 9 VGA 21 power AC 34 battery 31 power button identifying 7 power connector, identifying 8 power lights, identifying 8 power meter, using 31 power settings, using 31 product name and number, computer 12 public WLAN connection 15 R recover options 50 recovery discs 49, 52 HP Recovery Manager 51 media 52 starting 52 supported discs 49 system 51 USB flash drive 52 using HP Recovery media 50 recovery media creating 49 creating using HP Recovery Manager 50 regulatory information regulatory label 13 wireless certification labels 13 right control zone, identifying 8 right-edge swipe TouchPad and touch screen gesture 26 RJ-45 (network) jack, identifying 8 RJ-45 (network) status lights, identifying 8 S security cable lock, installing 44 security cable slot, identifying 8 serial number 12 serial number, computer 12 service door release latch 9 Index 57 service door, identifying 8 service labels, locating 12 setting password protection on wakeup 30 Setup Utility (BIOS) passwords 42 sharing media 17 shipping the computer 39 shutdown 35 SIM slot, identifying 9 Sleep exiting 30 initiating 30 Sleep and Hibernation initiating 29 slots memory card reader 7 security cable 8 SIM 9 software Disk Cleanup 37 Disk Defragmenter 37 software updates, installing 43 speakers connecting 19 identifying 9 Starting right 1 storing a battery 33 supported discs, recovery 49 system recovery 51 system restore point creating 50 system restore point, creating 49 T tap TouchPad and touch screen gesture 25 temperature 33 testing an AC adapter 35 top-edge swipe and bottom-edge swipe TouchPad and touch screen gesture 27 touch screen gesture, one-finger slide 27 TouchPad using 25 TouchPad and touch screen gestures left-edge swipe 27 right-edge swipe 26 58 Index Windows tools using 50 Wireless Assistant software 14 wireless button 14 wireless certification label 13 wireless controls button 14 operating system 14 Wireless Assistant software 14 wireless light 10, 14 wireless network (WLAN) connecting 15 corporate WLAN connection 15 functional range 16 public WLAN connection 15 wireless network, securing 44 WLAN antennas, identifying 10 WLAN device 13 WLAN label 13 WWAN antennas, identifying 10 WWAN device 16 tap 25 top-edge swipe and bottom-

edge swipe 27 two-finger click 26 two-finger pinch/zoom 26 two-finger scroll 25 TouchPad light, identifying 9 TouchPad zone, identifying 9 TouchPad, buttons 7, 8 traveling with the computer 13, 33, 39 turning off the computer 35 two-finger click TouchPad and touch screen gesture 26 two-finger pinch/zoom TouchPad and touch screen gesture 26 two-finger scroll TouchPad and touch screen gesture 25 U unresponsive system 35 updating programs and drivers 37 USB 2.0 charging (powered) port, identifying 9 USB 2.0 port, identifying 9 USB 3.0 charging (powered) port, identifying 9 USB 3.0 port, identifying 9 using a keyboard and mouse 28 using external AC power 34 using passwords 41 using the TouchPad 25 V vents, identifying 9 VGA port, connecting 21 video 20 W webcam identifying 10 using 19 webcam light, identifying 10 Windows system restore point 49, 50 Windows applications key, identifying 10 Windows key, identifying 10 Windows passwords 41

Regulatory, Safety, and Environmental Notices User Guide Copyright 2018, 2019 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Java is a registered trademark of Oracle and/or its affiliates. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Fourth Edition: April 2019 First Edition: March 2018 Document Part Number: L25269-004 About This Guide This guide provides regulatory, safety, and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, tablets, desktops, thin clients, personal workstations, all-in-ones, and point-of-sale terminals. To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. WARNING!

Indicates a hazardous situation that, if not avoided, could result in serious injury or death. CAUTION:

Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. Indicates information considered important but not hazard-related (for example, messages IMPORTANT:

related to property damage). Warns the user that failure to follow a procedure exactly as described could result in loss of data or in damage to hardware or software. Also contains essential information to explain a concept or to complete a task. NOTE: Contains additional information to emphasize or supplement important points of the main text. TIP: Provides helpful hints for completing a task. iii iv About This Guide Table of contents 1 Regulatory notices ........................................................................................................................................ 1 Accessing regulatory labels ................................................................................................................................... 1 Federal Communications Commission notice ....................................................................................................... 1 Modifications ....................................................................................................................................... 2 Cables .................................................................................................................................................. 2 Products with wireless LAN devices or HP Mobile Broadband Modules ............................................. 2 Belarus regulatory notice ...................................................................................................................................... 3 Brazil notice ........................................................................................................................................................... 3 Canada notices ....................................................................................................................................................... 3 European Union regulatory notices ....................................................................................................................... 3 Declaration of Conformity ................................................................................................................... 3 Products with radio functionality (EMF) ........................................................................... 4 Restrictions for products with radio functionality (select products only) ....................... 4 Radio frequency bands and maximum power levels (select products and countries only) .................................................................................................................. 4 Ergonomics notice ............................................................................................................. 5 European telephone network declaration (Modem/Fax) ................................................. 5 Australia and New Zealand notice ......................................................................................................................... 5 China WWAN notice ................................................................................................................................................ 5 China radio equipment notice ................................................................................................................................ 5 Japan notice ........................................................................................................................................................... 6 Wireless LAN, Wireless WAN, and Bluetooth certification markings ................................................ 6 Mexico notice ......................................................................................................................................................... 6 Singapore wireless notice ...................................................................................................................................... 7 South Korea notices ............................................................................................................................................... 7 Thailand wireless notice ........................................................................................................................................ 7 Taiwan NCC notices ................................................................................................................................................ 8 Wireless LAN 802.11a devices ............................................................................................................ 8 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices .............................................. 8 Airline travel notice ................................................................................................................................................ 8 User-replaceable battery notices .......................................................................................................................... 8 Factory-sealed battery notices ............................................................................................................................. 9 Laser compliance ................................................................................................................................................... 9 Telecommunications device approvals ................................................................................................................. 9 Modem notices ..................................................................................................................................................... 10 U.S. modem statements .................................................................................................................... 10 v U.S. modem declarations .................................................................................................................. 11 Canada modem statements .............................................................................................................. 12 Japan modem statements ................................................................................................................ 12 New Zealand modem statements ..................................................................................................... 12 Voice support .................................................................................................................. 13 Macrovision Corporation notice ........................................................................................................................... 13 2 Safety notices ............................................................................................................................................. 14 Important safety information ............................................................................................................................. 14 Heat-related safety warning notice .................................................................................................................... 15 Potential safety conditions notice ....................................................................................................................... 15 Installation conditions ......................................................................................................................................... 15 Acoustics notice ................................................................................................................................................... 15 Battery notices ..................................................................................................................................................... 15 Fan notices ........................................................................................................................................................... 16 Headset and earphone volume level notice ........................................................................................................ 16 Laser safety ......................................................................................................................................................... 16 Power supply and power cord set requirements ................................................................................................ 17 Power supply class I grounding requirements .................................................................................. 17 Brazil notice .................................................................................................................... 17 Denmark .......................................................................................................................... 17 Finland ............................................................................................................................. 17 Norway ............................................................................................................................ 17 Sweden ............................................................................................................................ 17 Power supply requirements .............................................................................................................. 17 For use in Norway ........................................................................................................... 17 Power cord set requirements ............................................................................................................ 18 Power cord notice .............................................................................................................................. 18 DC plug of external HP power supply ............................................................................. 18 Japan power cord notice ................................................................................................................... 19 Japan power cord requirements ....................................................................................................... 19 Pinch hazard ........................................................................................................................................................ 19 TV antenna connectors protection ...................................................................................................................... 19 External television antenna grounding ............................................................................................ 19 Lightning protection .......................................................................................................................... 19 Note to CATV system installer ........................................................................................................... 20 Travel notice ........................................................................................................................................................ 20 China safety notices ............................................................................................................................................. 21 China: Altitude notice ........................................................................................................................ 21 China: Tropical warning notice .......................................................................................................... 21 Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................................... 22 vi

......................................................................................................................................... 22 3 Environmental notices ................................................................................................................................. 23 Electronic hardware, packaging and battery recycling ....................................................................................... 23 Disposal of waste equipment by users ............................................................................................................... 23 Brazil alkaline battery disposal ........................................................................................................................... 23 Brazil hardware recycling information ................................................................................................................ 23 Taiwan battery recycling information ................................................................................................................. 24 ENERGY STAR Certification (select products only) ............................................................................................ 24 Chemical substances ........................................................................................................................................... 25 Mercury statement .............................................................................................................................................. 25 Perchlorate materialspecial handling may apply ............................................................................................. 25 China environmental notices ............................................................................................................................... 26 China PC energy label .......................................................................................................................................... 26 China restriction of hazardous substances (RoHS) for notebook and tablet computers ................................... 29 The Table of Hazardous Substances/Elements and their Content ................................................... 29

..................................................................... 30 China restriction of hazard substances (ROHS) for desktops, thin clients, personal workstations, all-in-

ones, and point-of-sale terminals ....................................................................................................................... 31 The Table of Hazardous Substances/Elements and their Content ................................................... 31

(ROHS) .................................................................................................................................................................. 33

(RoHS) ..................................................... 35

....................................................................................................... 35

(RoHS) ......................................................................................................................................... 36

....................................................................................................... 36 India restriction of hazardous substances (RoHS) .............................................................................................. 37 Information for European Union Commission Regulation 1275/2008 .............................................................. 37 IT ECO declarations .............................................................................................................................................. 37 Japan restriction of hazardous substances (RoHS) ............................................................................................ 37 Ley para el Aprovechamiento Sustentable de la Energa de Mxico .................................................................. 38 Turkey WEEE regulation ...................................................................................................................................... 38 TCO Certified ........................................................................................................................................................ 39 TCO Certified Edge ................................................................................................................................................ 40 Index ............................................................................................................................................................. 41 vii viii 1 Regulatory notices This chapter provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Accessing regulatory labels Regulatory labels, which provide country or regional regulatory information (for example, FCC ID), may be physically located on the bottom of the computer, inside the battery bay (select products only), under the removable service door (select products only), on the back of the display, or on the wireless or modem module. Some products may also provide electronic regulatory labels (e-labels) that can be accessed through the system BIOS. NOTE: Electronic labels are not available on all products. NOTE: Devices not for sale or use in the United States may not contain a FCC ID. To view electronic regulatory labels:

Turn on or restart the computer. Press esc or f10 to enter Computer Setup. 1. 2. 3. 4. Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press enter. To view an electronic label, use a pointing device or the arrow keys to select one of the listed items, and then press OK. NOTE: The list of available electronic label items varies depending on the computer model and installed devices. 5. To exit Computer Setup menus without making any changes:

Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select Main, select Ignore Changes and Exit, and then press enter. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Accessing regulatory labels 1 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. 1. 2. For questions regarding this product:

Write to:

HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 Call HP at 650-857-1501 or Email techregshelp@hp.com To identify this product, refer to the part, series, or model number found on the product. The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Modifications Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in a manner that is in conformance with the expected typical usage. 2 Chapter 1 Regulatory notices Belarus regulatory notice The product complies with the Belarus National Radio/Telecom Technical Regulation TR 2018/024/BY. Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Ao operar o dispositivo a uma distncia muito prxima do seu corpo, utilize um acessrio de armazenamento no metlico para posicionar o dispositivo a uma distncia mnima de 1,5 cm do corpo. IMPORTANT: A alimentao de energia predefinida para 220/230Vv. Se voc possuir tomada eltrica de 110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tenso correta. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING! Exposure to Radio Frequency Radiation: The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in a manner that is in conformance with the expected typical usage. IMPORTANT: When using IEEE 802.11a, n, or ac wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-

GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. European Union regulatory notices Declaration of Conformity Products bearing the CE marking have been constructed so that they can operate in at least one EU Member State and comply with one or more of the following EU Directives as may be applicable:

Belarus regulatory notice 3 RED 2014/53/EU; Low Voltage Directive 2014/35/EU; EMC Directive 2014/30/EU; Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the following website: http://www.hp.eu/certificates

(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany. Email techregshelp@hp.com Products with radio functionality (EMF) This product incorporates a radio transmitting and receiving device. For notebook computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product. Restrictions for products with radio functionality (select products only) IEEE 802.11x wireless LAN with 5.155.35 GHz frequency band is restricted for IMPORTANT:

indoor use only in all countries reflected in the matrix. Using this WLAN application outdoors might lead to interference issues with existing radio services. IMPORTANT:

excluded in all countries reflected in the matrix. Fixed outdoor installations for WiGig application (5766 GHz frequency band) are Radio frequency bands and maximum power levels (select products and countries only) Maximum Transmit Power EIRP (mW) Radio Technology Bluetooth; 2,4 GHz NFC; 13,56 MHz RFID; 125 kHz/13,56 MHz WLAN Wi-Fi 802.11x; 2,4 GHz WLAN Wi-Fi 802.11x; 5 GHz WWAN 3G UTMS; 900/2100 MHz WWAN 2G GSM GPRS EDGE; 900 MHz WWAN 2G GSM GPRS EDGE; 1800 MHz WiGig 802.11ad; 60 GHz WWAN 4G LTE; 700/800/900/1800/2100/2300/2600/3500 MHz Less than 1 100 10 100 200 200 250 2000 1000 316 NOTE: Use only HP-supported software drivers and correct country settings to ensure compliance. 4 Chapter 1 Regulatory notices Ergonomics notice When a mobile computer is used at the office workstation for display work tasks where the Visual Display Unit

(VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000 (voluntary GS certification) Mobile computers bearing the "GS" approval mark meet the applicable ergonomic requirements. Without external keyboards, they are suitable only for short-time use for VDU tasks. During mobile use with disadvantageous illumination conditions (e.g. direct sunlight) reflections may occur, which result in reduced readability. A computer system comprising HP brand products meets the applicable ergonomic requirements if all affected constituent products bear the "GS" approval mark, for example Business Desktop PC, keyboard, PC-

mouse and monitor. European telephone network declaration (Modem/Fax) The product herewith complies with the requirements of the applicable Directive and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/

regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. Australia and New Zealand notice This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. The computer must be connected to the Telecommunication Network through a line cord that meets the requirements of AS/CA S008. WARNING! Modems without integral RJ11 connector that are shipped with this computer should not be installed in any other device. China WWAN notice China radio equipment notice Australia and New Zealand notice 5 Japan notice V-2 VCCI32-1 5GHz Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. Some products may use electronic regulatory labels (e-labels). To view the certification mark and numbers on an e-label, please refer to the previous Accessing regulatory labels section. e e Mexico notice Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. The regulatory model number for this product is on the regulatory label. If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory. The regulatory model number for this product is on the regulatory label. 6 Chapter 1 Regulatory notices Singapore wireless notice Turn off any WWAN devices while you are aboard aircraft. The use of these devices aboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. South Korea notices Thailand wireless notice

(This telecommunication equipment conforms to the requirements of NBTC.) This radio communication equipment has the electromagnetic field strength in compliance with the Safety Standard for the Use of Radio communication Equipment on Human Health announced by the National Telecommunications Commission. Singapore wireless notice 7 Taiwan NCC notices Wireless LAN 802.11a devices Wireless LAN 802.11 devices/Bluetooth devices/Short range devices Airline travel notice Use of electronic equipment aboard commercial aircraft is at the discretion of the airline. User-replaceable battery notices When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP website at http://www.hp.com/

recycle. For information about removing a user-replaceable battery, refer to the user guide included with the product. 8 Chapter 1 Regulatory notices Factory-sealed battery notices The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in accordance with IEC/EN 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007. Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. Factory-sealed battery notices 9 Modem notices U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-

distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. 10 Chapter 1 Regulatory notices U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

Modem notices 11 Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japan modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the LSI Corporation PCI-SV92EX Soft modem is below:

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

12 Chapter 1 Regulatory notices a. b. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Macrovision Corporation notice 13 2 Safety notices Important safety information WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product. The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving it. Install the computer near an AC outlet. The AC power cord is your computers main AC disconnecting device and must be easily accessible at all times. If the power cord provided with your computer has a grounded plug, always use the power cord with a properly grounded AC outlet to avoid the risk of electric shock. To reduce the possibility of an electric shock from the telephone network, plug your computer into the AC outlet before connecting it to the telephone line. Also, disconnect the telephone line before unplugging your computer from the AC power outlet. Always disconnect the modem cord from the telephone system before installing or removing your computer cover. Do not operate the computer with the cover removed. For your safety, always unplug the computer from its power source and from any telecommunications systems (such as telephone lines), networks, or modems before performing any service procedures. Failure to do so may result in personal injury or equipment damage. Hazardous voltage levels are inside the power supply and modem of this product. As a safety precaution, if the system power load exceeds the specific configurations capacities, the system may temporarily disable some USB ports. WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS. IMPORTANT:

If your computer is provided with a voltage select switch for use in a 115 or 230 V power system, the voltage select switch has been pre-set to the correct voltage setting for use in the particular country/region where it was initially sold. Changing the voltage select switch to the incorrect position can damage your computer and void any implied warranty. 14 Chapter 2 Safety notices This product has not been evaluated for connection to an IT power system (an AC distribution system with no direct connection to earth, according to applicable safety standards). Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the mobile computer, do not place the mobile computer directly on your lap or obstruct the computer air vents. Use the mobile computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The mobile computer and the AC adapter comply with the user-accessible surface temperature limits defined by applicable safety standards. Potential safety conditions notice If you notice any of the following conditions (or if you have other safety concerns), do not use the computer:

crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer. It is normal for these conditions to appear when an internal electronic component fails in a safe and controlled manner. However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact technical support for assistance. Installation conditions See installation instructions before connecting this equipment to the input supply. WARNING! Energized and moving parts may be inside the computer. Disconnect power to the equipment before removing the enclosure. Replace and secure the enclosure before re-energizing the equipment. Acoustics notice Battery notices Sound pressure level (LpA) is far below 70dB(A) (operator position, normal operation, according to ISO 7779). To display product noise emission data, go to IT ECO Declarations at http://www.hp.com/go/ted, and then select a product category from the drop-down menu. WARNING! The product may contain an internal lithium manganese dioxide, vanadium pentoxide, or alkaline battery or battery pack. There is risk of fire and burns if the battery pack is not handled properly. WARNING! Do not attempt to recharge the battery. WARNING! Do not expose to temperatures higher than 60 C (140 F). WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Fast charging may not be available for non-compatible or non-HP batteries. WARNING! To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING! Replace only with the HP spare designated for this product. Heat-related safety warning notice 15 WARNING! Do not ingest battery, a Chemical Burn Hazard. WARNING! This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. WARNING! Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away WARNING!

from children. WARNING!

immediate medical attention. If you think batteries might have been swallowed or placed inside any part of the body, seek WARNING!

explosion or the leakage of flammable liquid or gas. Leaving a battery in an extremely high temperature surrounding environment can result in an WARNING! A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Icon Description Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. In order to forward them to recycling or proper disposal, please use the public collection system or return them to HP, an authorized HP partner, or their agents. Fan notices WARNING!

Keep body parts away from moving parts. WARNING! Keep body parts away from fan blades. WARNING! Keep body parts out of the motion path. Headset and earphone volume level notice WARNING!

To prevent possible hearing damage, do not listen at high volume levels for long periods. Adjustment of the volume control as well as the equalizer to other settings than the center position may increase the ear-/headphones output voltage and therefore the sound pressure level. The use of factors influencing the ear-/headphones output other than those specified by the manufacturer (e.g. operating system, equalizer software, firmware, driver) may increase the ear-/headphones output voltage and therefore the sound pressure level. Laser safety For products equipped with optical drives or fiber optic transceivers. This product may be provided with an optical storage device (i.e., CD or DVD drive) and/or fiber optic transceiver. These contain lasers and are classified as Class 1 Laser Products in accordance with the standard IEC/EN 60825-1 and comply with its requirements. Each laser product complies with US FDA Regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. 16 Chapter 2 Safety notices WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the laser products installation guide may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein. Allow only HP Authorized Service technicians to repair the unit. Power supply and power cord set requirements Power supply class I grounding requirements For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the system power cord into an AC outlet that provides a ground connection. Substitute cords may not provide adequate fault protection. Only use the power cord supplied with this product or an HP Inc. authorized replacement. Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia eltrica que possua aterramento (trs pinos), conforme a norma nbr abnt 5410,visando a segurana dos usurios contra choques eltricos. Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. Laite on liitettv suojakoskettimilla varustettuun pistorasiaan. Brazil notice Denmark Finland Norway Sweden Apparatet m tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Power supply requirements The power supplies on some products have external power switches. The voltage select switch feature on the product permits it to operate from any line voltage between 100-127 or 200-240 volts AC. Power supplies on those products that do not have external power switches are equipped with internal circuits that sense the incoming voltage and automatically switch to the proper voltage. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. For use in Norway This product is also designed for an IT power system with phase-to-phase voltage 230V. Power supply and power cord set requirements 17 Power cord set requirements 1. 2. WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet. If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. The power cord set received with the product meets the requirements for use in the country where the equipment was originally purchased. Use only the power cord provided with the unit or an authorized replacement power cord from HP Inc. or an approved HP Inc. source. Replacement part numbers may be found at http://www.hp.com/support. Power cord sets for use in other countries must meet the requirements of the country where you use the product. For more information on power cord set requirements, contact your authorized HP dealer, reseller, or service provider. WARNING! Do not use power cords from other products. Mismatched power cords may result in a shock and fire hazard. The requirements listed below are applicable to all countries:

The power cord must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be installed. The length of the power cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). For a power cord 2.0 m

(6.56 feet) or less, the diameter of the wire must be a minimum of 0.75 mm2 or 18AWG. If the power cord is longer than 2.0 m (6.56 feet), the diameter of the wire must be a minimum of 1.0 mm2 or 16AWG. The power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. WARNING! Do not operate this product with a damaged power cord set. If the power cord set is damaged in any manner, replace it immediately. Damaged cords may result in user exposure to hazards. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/

18AWG, and the length of the cord must be between 1.0 m (3.2 ft) and 2 m (6.56 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. DC plug of external HP power supply 18 Chapter 2 Safety notices Japan power cord notice Japan power cord requirements For use in Japan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. Pinch hazard WARNING! Observe pinch hazard areas. Keep fingers away from closing parts. TV antenna connectors protection External television antenna grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is electrically grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper electrical grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-

discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Lightning protection For added protection of any product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug the product from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product from lightning and power line surges. Table 2-1 Antenna Grounding Reference Grounding Component 1 Electric Service Equipment Pinch hazard 19 Table 2-1 Antenna Grounding (continued) Reference Grounding Component 2 3 4 5 6 7 Power Service Grounding Electrode System (NEC Art 250, Part III) Ground Clamps Grounding Conductors (NEC Section 810.21) Antenna Discharge Unit (NEC Section 810.20) Ground Clamp Antenna Lead-in Wire Note to CATV system installer This reminder is provided to call the CATV systems installers attention to section 820.93 of the National Electric Code, which provides guidelines for proper grounding and in particular, specify that the Coaxial cable shield shall be connected to grounding system of the building, as close to the point of cable entry as practical. Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. 20 Chapter 2 Safety notices China safety notices China: Altitude notice 2000m Icon Description 2000m China: Tropical warning notice Icon Description China safety notices 21 Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system.

(1) 30 10

(2) 2 2 1 22 Chapter 2 Safety notices 3 Environmental notices This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware, packaging and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle. For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/. Disposal of waste equipment by users Icon Description This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/recycle. Brazil alkaline battery disposal Icon Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar No descarte o produto eletrnico em lixo comum Brazil hardware recycling information Icon Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar No descarte o produto eletrnico em lixo comum Electronic hardware, packaging and battery recycling 23 Taiwan battery recycling information Icon Description The Taiwan EPA requires dry battery manufacturing or importing firms, in accordance with Article 15 of the Waste Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or promotions. Contact a qualified Taiwanese recycler for proper battery disposal. ENERGY STAR Certification (select products only) ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency criteria or requirements set by the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, HP Inc. has followed the U.S. EPAs enhanced product certification process to ensure that products marked with the ENERGY STAR logo are ENERGY STAR certified per the applicable ENERGY STAR guidelines. The following logo appears on all ENERGY STAR-certified computers:

A key ENERGY STAR requirement for computer products is power management features that significantly reduce energy consumption when the product is not in use. Power management allows a computer to automatically enter a low power sleep mode, or other low power mode, after a defined period of inactivity. The power management features have been preset as follows when the computer is operating on AC power:

Computer type Time to activate display sleep mode Time to activate computer sleep mode (minutes) Resuming from sleep mode Notebooks, Mobile Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Tablets/Slates Less than or equal to 1 minute Not applicable Not applicable Desktops, Integrated Desktops, Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Product will exit sleep mode when the power/sleep button is pressed. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. Product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. When sleep mode is supported by operating system product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. Thin clients Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes when sleep mode is supported by the operating system (varies by model) 24 Chapter 3 Environmental notices Computer type Time to activate display sleep mode Time to activate computer sleep mode (minutes) Resuming from sleep mode If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. For computers that support an always-on, always-connected use profile where internet access is available

(such as tablets and slates), alternative low power modes - such as Short or Long Idle modes (as defined in the ENERGY STAR Computer Program Requirements) are provided that consume very little power (</= 10 Watts) and when applicable, maximize product battery life. These alternative low power modes are dynamic, with the display sleep mode activated within 1 minute of user inactivity. The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management website at http://www.energystar.gov/

powermanagement. Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR website at http://www.energystar.gov. ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. Chemical substances Mercury statement HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No. 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. This statement applies to all-in-one computers with built-in display panels that do not use LED backlighting. This HP product may contain the following material that might require special handling at end-of-life:

Mercury in the fluorescent lamp in the display LCD Disposal of mercury can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA)

(http://www.eiae.org). Perchlorate materialspecial handling may apply The computers real-time clock battery may contain perchlorate and may require special handling when recycled or disposed of in California. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/. Chemical substances 25 China environmental notices China PC energy label In accordance with The Regulation of the Implementation on China Energy Label for Microcomputers, this microcomputer has an Energy Efficiency Label. The energy efficiency grade, TEC (Typical Energy Consumption), and product category presented on the label are determined and calculated according to the standard GB28380-2012. 1. Energy Efficiency Grades The grade is determined by the standard with the calculation of base consumption level with the sum of all the allowances for additional components such as main memory and graphics card. For products of any grade, the TEC should not exceed the value specified in the following table:

Product Type TEC (kilowatt hour) Desktop microcomputer, AIO Category A 98.0+Efa 148.0+Efa 198.0+Efa Grade 1 Grade 2 Grade 3 Category B 125.0+Efa 175.0+Efa 225.0+Efa Category C 159.0+Efa 209.0+Efa 259.0+Efa Category D 184.0+Efa 234.0+Efa 284.0+Efa Portable Computer Category A 20.0+Efa 35.0+Efa 45.0+Efa Category B 26.0+Efa 45.0+Efa 65.0+Efa Category C 54.5+Efa 75.0+Efa 123.5+Efa NOTE: Efa is the sum of power factor of product additional functions. 2. Typical Energy Consumption The energy consumption figure presented on the label is the data measured with the representative configuration that covers all the configurations in the registration unit which is selected according to The Regulation of the Implementation on China Energy Label for Microcomputers". Thus, actual energy consumption of this specific microcomputer may not be the same as the TEC data presented in the label. 3. Product Category The product category is determined by the standard according to the microcomputers configuration. The categorization of products complies with the regulations in the following table:

Product Type Configuration Description Desktop microcomputer, AIO Portable Computer 26 Chapter 3 Environmental notices Product Type Category A Category B Category C Configuration Description The desktop microcomputer and AIO whose configuration is out of the scope of Category B, C, and D The portable computer whose configuration is out of the scope of Category B and C CPU physical core number of 2, and system memory of not less than 2 GB A Discrete GPU CPU physical core number of over 2, with at least one of the following features:

System memory of not less than 2 GB The product that has a CPU physical core number of not less than 2, system memory of not less than 2GB, A Discrete GPU with Frame Buffer Width not less than 128-bit. A Discrete GPU 1. 2. 1. 2. Category D CPU physical core number of not less than 4, with at least one of the following features:

System memory of not less than 4 GB A Discrete GPU with Frame Buffer Width not less than 128-bit For more details on the specification, please refer to the standard GB28380-2012. China PC energy label 27 28 Chapter 3 Environmental notices China restriction of hazardous substances (RoHS) for notebook and tablet computers The Table of Hazardous Substances/Elements and their Content As required by Chinas Management Methods for Restricted Use of Hazardous Substances in Electrical and Electronic Products Part Name Lead (Pb)

(Hg)

(Cd) Mercury Cadmium Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Hazardous Substances Battery Cables Camera Chassis/Other Flash memory card reader Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power pack Power supply Remote control Smart card/Java card reader Speakers, external X X X X X X X X X X X O X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O China restriction of hazardous substances (RoHS) for notebook and tablet computers 29 Hazardous Substances Mercury Cadmium Lead (Pb)

(Hg)

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) This form has been prepared in compliance with the provisions of SJ/T 11364. O: Indicates that the content of said hazardous substance in all of the homogenous materials in the component is within the limits required by GB/T 26572. X: Indicates that the content of said hazardous substance exceeds the limits required by GB/T 26572 in at least one homogenous material in the component. All parts named in this table with an X are in compliance with the European Unions RoHS Legislation. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

(Cr(VI)) Part Name TV tuner USB flash memory drive USB hub Web camera Wireless receiver Wireless cards

I/O PCA

(LCD) CD/DVD/

X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 30 Chapter 3 Environmental notices

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

/Java USB USB X X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O

(Cr(VI)) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 O O O O O O O O O O O O O O O O O O China restriction of hazard substances (ROHS) for desktops, thin clients, personal workstations, all-in-ones, and point-of-sale terminals The Table of Hazardous Substances/Elements and their Content As required by Chinas Management Methods for Restricted Use of Hazardous Substances in Electrical and Electronic Products China restriction of hazard substances (ROHS) for desktops, thin clients, personal workstations, all-in-

ones, and point-of-sale terminals 31 Hazardous Substances Part Name Lead (Pb)

(Hg)

(Cd) Mercury Cadmium Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Flash memory card reader Battery Cables Camera Chassis/Other Fan Floppy disk drive Hard disk drive Headphones Heat sink I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Projector Remote control Smart card/Java card reader Solid-state drives Speakers, external Stylus Touch mat TV tuner USB flash memory drive X X X X X X X X X X X X X O X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 32 Chapter 3 Environmental notices Hazardous Substances Mercury Cadmium Lead (Pb)

(Hg)

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Part Name USB hub Web camera Wireless receiver Wireless cards 3D Capture Stage/

Turntable

I/O PCA This form has been prepared in compliance with the provisions of SJ/T 11364. O: Indicates that the content of said hazardous substance in all of the homogenous materials in the component is within the limits required by GB/T 26572. X: Indicates that the content of said hazardous substance exceeds the limits required by GB/T 26572 in at least one homogenous material in the component. All parts named in this table with an X are in compliance with the European Unions RoHS Legislation. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.

(ROHS)

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

(Cr(VI)) X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O

(ROHS) 33

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

(Cr(VI))

(LCD) CD/DVD/

/Java USB USB 3D /

X X O X X X X X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 O O O O O O O O O O O O O O O O O O O O O O O O 34 Chapter 3 Environmental notices

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Unit Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent chromium (Cr+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Cables

Chassis/Other

I/O PCAs

(LCD) Liquid crystal display (LCD) panel Memory Motherboard, processor, heat sinks Power pack Power supply Storage Devices Wireless Devices 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption.

(RoHS) 35 http://www.hp.com/support To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides.

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Lead Mercury Cadmium

(Pb)

(Hg)

(Cd) Hexavalent chromium (Cr

+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Unit Cables

/ Chassis/Other

I/O PCAs

(LCD) Liquid crystal display

(LCD) panel (for AIO only) Memory Motherboard, processor, heat sinks Power supply Storage Devices 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption. http://www.hp.com/support To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. 36 Chapter 3 Environmental notices India restriction of hazardous substances (RoHS) This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the "India E-waste Rule 2016." It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except where allowed pursuant to the exemptions set in Schedule 2 of the Rule. Information for European Union Commission Regulation 1275/2008 To locate product power consumption data, including when the product is in networked standby with all wired network ports connected and wireless devices connected, refer to section P14 Additional information of the product IT ECO Declaration at http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/

itecodesktop-pc.html. Where applicable, activate and deactivate a wireless network using the instructions included in the product user guide or the operating system. Information is also available at http://www.hp.com/support. IT ECO declarations Notebook or tablet PCs http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/iteconotebook-o.html Desktop PCs and Thin Clients Workstations http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?

jumpid=reg_R1002_USEN http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html Japan restriction of hazardous substances (RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. India restriction of hazardous substances (RoHS) 37 Ley para el Aprovechamiento Sustentable de la Energa de Mxico Ley para el Aprovechamiento Sustentable de la Energa de Mxico Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energa de Mxico, que requiere la divulgacin del consumo de energa del modo de uso normal (modo inactivo) y del modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energa del modo inactivo de su configuracin especfica puede diferir de la informacin de la etiqueta. El consumo real de energa de su producto puede ser mayor o menor que el valor informado en la etiqueta de energa de producto para Mxico a causa de factores como la configuracin (componentes y mdulos seleccionados) y el uso (tareas que se estn efectuando, software instalado y en ejecucin, etc.). NOTE: Esta ley no es aplicable a las estaciones de trabajo. Turkey WEEE regulation Trkiye Cumhuriyeti: AEEE Ynetmeliine Uygundur 38 Chapter 3 Environmental notices TCO Certified This section applies only to products bearing the TCO Certified logo. TCO Certified 39 TCO Certified Edge This section applies only to products bearing the TCO Certified Edge logo. 40 Chapter 3 Environmental notices Symbols/Numerics 35, 36 Federal Communications Commission notices notebook computers cables 2 notebook computers modifications 2 35, 36 notebook computers notice 1 Index A airline travel notice 8 altitude notice 21 B battery 15 battery notice 8, 9, 23 battery recycling 23 Belarus regulatory notice 3 Brazil notice 3, 17 C cable grounding notice 22 Canada modem statement 12 Canada notices 3 China environmental notices 26 China PC energy label 26 China restriction of hazardous substances notice 29, 31 D disposal notices battery 23 battery, user replacement 8 equipment 23 factory sealed battery 9 E electronic hardware and battery recycling 23 ENERGY STAR certification 24 environmental notices 23 equipment disposal notice 23 ergonomics notice 5 European Union Commission Regulation 1275/2008 37 F fan notice 16 G GS Notice 5 H headset and earphone volume level notice 16 I India restriction of hazardous substances notice 37 J Japan modem statement 12 Japan notice 6 Japan power cord notice 19 Japan restriction of hazardous substances notice 37 L labels, regulatory 1 laser safety notice 9, 16 M Macrovision Corporation notice 13 maximum power levels 4 Mexico wireless notice 6 modem notices 10 modem statements Canada 12 Japan 12 New Zealand 12 U.S. 10, 11 modifications, notebook computers Federal Communications Commission 2 N New Zealand modem statement 12 airline travel 8 battery 8, 9, 15, 23 Belarus regulatory 3 Brazil 3, 17 Canada 3 China restriction of hazardous substances 29, 31 environmental 23 equipment disposal 23 ergonomics 5 fan 16 headset and earphone volume level 16 India restriction of hazardous substances 37 Japan 6 Japan power cord 19 Japan restriction of hazardous substances 37 laser safety 9, 16 Macrovision Corporation 13 Mexico 6 modem 10 perchlorate material 25 power cords 18 Singapore 7 South Korea 7 Taiwan 8 Thailand wireless notice 7 travel 20 notices, notebook computers Federal Communications Commission 1 P power cord notice 18 R radio frequency bands 4 recycling, electronic hardware and battery 23 S Singapore wireless notice 7 Index 41 South Korea notice 7 T Taiwan notice 8 TCO Certified Certification 39 TCO Certified Edge Certification 40 Thailand wireless notice 7 travel notice 20 tropical warning notice 21 TV tuner, cable grounding notice 22 U U.S. modem statement 10, 11 V voice support 13 volume level notice, headset and earphone 16 W wireless LAN devices 2 42 Index Informations sur les rglementations, la scurit et les conditions d'utilisation Manuel de l'utilisateur Copyright 2018, 2019 HP Development Company, L.P. Bluetooth est une marque dtenue par son propritaire et utilise sous licence par HP Inc. ENERGY STAR et la marque de ENERGY STAR sont des marques dposes aux tats-Unis. Java est une marque dpose d'Oracle et/ou de ses filiales. Les informations contenues dans ce document peuvent tre modifies sans pravis. Les garanties relatives aux produits et aux services HP sont dcrites dans les dclarations de garantie limite expresse qui les accompagnent. Aucun lment du prsent document ne peut tre interprt comme constituant une garantie supplmentaire. HP ne saurait tre tenu pour responsable des erreurs ou omissions de nature technique ou rdactionnelle qui pourraient subsister dans le prsent document. Quatrime dition : avril 2019 Premire dition : mars 2018 Rfrence du document : L25269-054 propos de ce manuel Ce manuel fournit des informations sur les rglementations, la scurit et les conditions d'utilisation en conformit avec les rglementations amricaines, canadiennes et internationales en matire d'ordinateurs portables, de tablettes, d'ordinateurs de bureau, de clients lgers, de stations de travail personnelles, de tout-en-un et de terminaux de point de vente. Pour accder aux derniers manuels de l'utilisateur, ouvrez la page http://www.hp.com/support, et suivez les instructions pour retrouver votre produit. Puis, slectionnez Guides de lutilisateur. AVERTISSEMENT ! Signale une situation dangereuse qui, si elle nest pas vite, peut entraner des blessures graves voire mortelles. ATTENTION : Signale une situation dangereuse qui, si elle nest pas vite, peut entraner des blessures lgres ou modres. IMPORTANT : Signale des informations considres comme importantes mais nimpliquant aucun danger

(par exemple, des messages lis des dommages matriels). Des avertissements signalent lutilisateur que tout non-respect scrupuleux dune procdure peut entraner une perte de donnes ou une dtrioration du matriel ou des logiciels. Contient galement des informations essentielles pour expliquer un concept ou pour accomplir une tche. REMARQUE : Contient des informations supplmentaires qui soulignent ou compltent les points importants du texte principal. CONSEIL :

Fournit des conseils utiles pour accomplir une tche. iii iv propos de ce manuel Sommaire 1 Avis de conformit ......................................................................................................................................... 1 Accs aux tiquettes de conformit ...................................................................................................................... 1 Avis de la FCC .......................................................................................................................................................... 2 Modifications ....................................................................................................................................... 2 Cbles .................................................................................................................................................. 2 Produits avec appareils sans fil LAN ou modules mobiles large bande HP ..................................... 3 Avis de rglementation pour la Bilorussie .......................................................................................................... 3 Avis pour le Brsil ................................................................................................................................................... 3 Avis pour le Canada ................................................................................................................................................ 3 Avis pour l'Union europenne ................................................................................................................................ 4 Dclaration de conformit .................................................................................................................. 4 Produits quips de fonctionnalit radio ......................................................................... 5 Restrictions pour les produits quips de fonctionnalit radio (certains produits uniquement) ...................................................................................................................... 5 Bandes de frquences radio et niveaux de puissance maximale (certains produits et pays uniquement) ......................................................................................................... 5 Avis sur l'ergonomie .......................................................................................................... 5 Dclaration relative au rseau tlphonique europen (modem/fax) ............................ 6 Avis pour l'Australie et la Nouvelle-Zlande .......................................................................................................... 6 Avis WWAN pour la Chine ....................................................................................................................................... 6 Avis sur les quipements radio pour la Chine ....................................................................................................... 6 Avis pour le Japon .................................................................................................................................................. 7 Marques de certification des priphriques WLAN, WWAN et Bluetooth ......................................... 7 Avis pour le Mexique .............................................................................................................................................. 7 Avis sur les appareils sans fil pour Singapour ....................................................................................................... 8 Avis pour la Core du Sud ...................................................................................................................................... 8 Avis sur les priphriques sans fil pour la Thalande ............................................................................................ 8 Avis de la NCC pour Tawan .................................................................................................................................... 9 Priphriques WLAN 802.11a ............................................................................................................. 9 Priphriques sans fil LAN 802.11/Priphriques Bluetooth/Priphriques courte porte .......... 9 Avis sur les utilisations en vol ............................................................................................................................... 9 Avis sur les batteries remplaables par l'utilisateur ............................................................................................. 9 Avis sur les batteries scelles en usine ............................................................................................................... 10 Conformit du laser ............................................................................................................................................. 10 Homologations du priphrique de tlcommunication .................................................................................... 11 Avis sur les modems ............................................................................................................................................ 11 Avis sur les modems pour les tats-Unis .......................................................................................... 11 v Dclarations sur les modems pour les tats-Unis ............................................................................ 13 Avis sur les modems pour le Canada ................................................................................................ 14 Avis sur les modems pour le Japon ................................................................................................... 14 Dclarations sur les modems pour la Nouvelle-Zlande ................................................................. 15 Prise en charge vocale .................................................................................................... 15 Avis de Macrovision Corporation ......................................................................................................................... 15 2 Avis relatifs la scurit .............................................................................................................................. 16 Informations importantes relatives la scurit ............................................................................................... 16 Notice davertissement relative la scurit lie la chaleur ........................................................................... 17 Avis sur les risques lis la scurit ................................................................................................................... 17 Conditions d'installation ...................................................................................................................................... 17 Avis sur lacoustique ............................................................................................................................................ 18 Avis relatif aux batteries ...................................................................................................................................... 18 Avis sur le ventilateur .......................................................................................................................................... 19 Avis sur le niveau du volume du casque et des couteurs .................................................................................. 19 Scurit des lasers ............................................................................................................................................... 19 Exigences relatives au bloc d'alimentation et au cordon d'alimentation ........................................................... 19 Exigences relatives la mise la terre des alimentations de classe 1 ............................................ 19 Avis pour le Brsil ............................................................................................................ 20 Danemark ........................................................................................................................ 20 Finlande ........................................................................................................................... 20 Norvge ........................................................................................................................... 20 Sude .............................................................................................................................. 20 Exigences relatives au bloc d'alimentation ...................................................................................... 20 Pour une utilisation en Norvge ..................................................................................... 20 Exigences relatives au cordon d'alimentation .................................................................................. 20 Informations sur le cordon d'alimentation ....................................................................................... 22 prise CC de la source d'alimentation externe HP ............................................................ 22 Avis sur les cordons d'alimentation pour le Japon ........................................................................... 22 Spcifications du cordon d'alimentation pour le Japon .................................................................... 22 Risque de pincement ........................................................................................................................................... 22 Protection des connecteurs de l'antenne TV ....................................................................................................... 22 Mise la terre d'une antenne de tlvision externe ......................................................................... 22 Protection contre la foudre ............................................................................................................... 23 Remarque destine aux installateurs de systmes de tlvision par cble .................................... 23 Avis sur les dplacements ................................................................................................................................... 23 Avis de scurit pour la Chine .............................................................................................................................. 24 Chine : avis sur l'altitude .................................................................................................................... 24 Chine : avis sur une utilisation dans des conditions tropicales ........................................................ 24 Norvge et Sude : Avis de mise la terre des cbles pour les produits quips dune carte TV ..................... 25 vi

......................................................................................................................................... 25 3 Avis des agences environnementales ............................................................................................................ 26 Recyclage du matriel lectronique, de l'emballage et de la batterie ................................................................ 26 Mise au rebut des quipements par les utilisateurs ........................................................................................... 26 Mise au rebut des batteries alcalines au Brsil ................................................................................................... 26 Informations sur le recyclage du matriel au Brsil ........................................................................................... 26 Informations de recyclage de la pile pour Taiwan .............................................................................................. 27 Certification ENERGY STAR (certains produits uniquement) ............................................................................. 27 Substances chimiques ......................................................................................................................................... 28 Avis sur le mercure .............................................................................................................................................. 28 Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire ................................. 29 Avis sur l'environnement pour la Chine ............................................................................................................... 29 tiquette de consommation nergtique des ordinateurs pour la Chine .......................................................... 29 Restrictions dutilisation de substances dangereuses (RoHS) pour les ordinateurs portables et les tablettes en Chine ................................................................................................................................................ 32 Tableau des substances/composants dangereux et leur contenu ................................................... 32

..................................................................... 33 Restrictions d'utilisation de substances dangereuses pour la Chine (ROHS) pour les ordinateurs de bureau, clients lgers, stations de travail personnelles, tout-en-un et les terminaux de point de vente ........ 34 Tableau des substances/composants dangereux et leur contenu ................................................... 34

(ROHS) .................................................................................................................................................................. 36

(RoHS) ..................................................... 38

....................................................................................................... 38

(RoHS) ......................................................................................................................................... 39

....................................................................................................... 39 Avis sur la restriction des substances dangereuses pour l'Inde (RoHS) ............................................................. 40 Informations sur le rglement 1275/2008 de la Commission europenne ....................................................... 40 Dclarations IT ECO .............................................................................................................................................. 40 Avis sur la restriction des substances dangereuses pour le Japon (RoHS) ........................................................ 40 Ley para el Aprovechamiento Sustentable de la Energa de Mxico .................................................................. 41 Rglementation WEEE de la Turquie ................................................................................................................... 41 Certifi TCO ........................................................................................................................................................... 42 TCO Certified Edge ................................................................................................................................................ 43 Index ............................................................................................................................................................. 44 vii viii 1 Avis de conformit Ce chapitre fournit des avis de rglementation spcifiques des pays et des rgions concernant les produits filaires et sans fil, ainsi que des informations de conformit concernant l'ordinateur. Certains de ces avis peuvent ne pas s'appliquer votre produit. Un ou plusieurs appareils sans fil intgrs peuvent tre installs. Dans certains environnements, l'utilisation d'appareils sans fil peut tre limite. Ces restrictions peuvent s'appliquer bord des avions, dans les hpitaux, dans les lieux proximit d'explosifs, dans les environnements dangereux, etc. Si vous ne connaissez pas la politique relative l'utilisation de ce produit, demandez l'autorisation de l'utiliser avant de le mettre sous tension. Accs aux tiquettes de conformit Les tiquettes de conformit, qui fournissent des informations sur les rglementations de votre pays ou rgion (par exemple, l'ID FCC), peuvent tre situes physiquement sous l'ordinateur, l'intrieur du compartiment de la batterie (certains produits uniquement), sous le cache de service amovible (certains produits uniquement), l'arrire de l'cran ou sur le module du modem ou de l'appareil sans fil. Certains produits peuvent galement fournir des tiquettes de rglementation lectroniques (e-tiquettes) accessibles via le systme BIOS. REMARQUE :

Les tiquettes lectroniques ne sont pas disponibles sur tous les produits. REMARQUE :

possdent peut-tre pas d'ID FCC. Les appareils qui ne sont pas destins la vente ou une utilisation aux tats-Unis ne Pour afficher les tiquettes de conformit lectroniques :

1. Mettez l'ordinateur sous tension ou redmarrez-le. Appuyez sur chap ou F10 pour accder Computer Setup. 2. 3. 4. ou l'aide d'un priphrique de pointage ou des touches de direction, slectionnez Advanced (Avanc), Electronic Labels (tiquettes de conformit), puis appuyez sur la touche entre. Pour afficher une tiquette lectronique, utilisez un priphrique de pointage ou les touches de direction pour slectionner un des lments de la liste, puis appuyez sur OK. REMARQUE :

d'ordinateur et des priphriques installs. La liste des lments d'tiquette lectronique disponibles varie en fonction du modle 5. Pour quitter les menus de Computer Setup sans effectuer de modification :

Slectionnez l'icne Exit (Quitter) dans le coin infrieur droit de l'cran, puis suivez les instructions l'cran. Utilisez les touches de direction pour slectionner Main (Principal), Ignore Changes and Exit (Ignorer les modifications et quitter), puis appuyez sur la touche entre. Accs aux tiquettes de conformit 1 Avis de la FCC Le prsent quipement a t test et dclar conforme aux limites d'un appareil numrique de Classe B, telles que dfinies dans l'article 15 des rglementations FCC. Ces limites sont conues pour fournir une protection raisonnable contre les interfrences prjudiciables dans un environnement rsidentiel. Le prsent quipement gnre, utilise et peut mettre une nergie de radiofrquence et, s'il n'est pas install et utilis conformment aux instructions, peut entraner des interfrences prjudiciables pour les radiocommunications. Cependant, tout risque d'interfrences ne peut tre totalement exclu dans certains environnements spcifiques. Si cet quipement entrane des interfrences en matire de rception radio ou tlvision, ce qui peut tre vrifi en teignant et en rallumant l'quipement, il est recommand l'utilisateur d'essayer de corriger les interfrences en suivant une ou plusieurs des mesures suivantes :

Rorienter ou dplacer l'antenne de rception. Augmenter la distance entre l'quipement et le rcepteur. Brancher lquipement sur un autre circuit que celui du rcepteur. Demander conseil votre revendeur ou un technicien radio ou tlvision expriment. Cet appareil est conforme l'article 15 des rglementations FCC. Son fonctionnement est soumis deux conditions :

Cet appareil ne doit pas provoquer des interfrences nuisibles, et Cet appareil doit accepter toute interfrence reue, notamment des interfrences pouvant provoquer un fonctionnement non voulu. 1. 2. Pour toute question concernant ce produit :

crivez :

HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 Appelez HP au 650-857-1501 ou Envoyez un courrier lectronique techregshelp@hp.com Pour identifier ce produit, reportez-vous la rfrence de pice, de gamme ou de modle indique sur le produit. Modifications Cbles La FCC stipule que l'utilisateur doit tre inform que toute modification opre sur l'appareil, n'ayant pas t expressment approuve par HP, peut entraner l'annulation des droits d'exploitation du produit dont bnficie l'utilisateur. Pour tre conformes la rglementation de la FCC, les connexions d'entre de l'appareil doivent tre tablies avec des cbles blinds munis d'embouts de connecteurs RFI/EMI mtalliques. 2 Chapitre 1 Avis de conformit Produits avec appareils sans fil LAN ou modules mobiles large bande HP Cet appareil ne doit pas tre plac ct ou fonctionner avec une autre antenne ou un autre metteur. AVERTISSEMENT ! Exposition aux radiations de frquence radio La puissance de rayonnement de cet appareil est infrieure aux limites d'exposition aux radiations mises par les frquences radio FCC. Toutefois, lappareil doit tre utilis dune manire conforme avec lutilisation normale attendue. Avis de rglementation pour la Bilorussie Le produit est conforme la rglementation technique nationale relative aux tlcommunications/radio pour la Bilorussie TR 2018/024/BY. Avis pour le Brsil Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Ao operar o dispositivo a uma distncia muito prxima do seu corpo, utilize um acessrio de armazenamento no metlico para posicionar o dispositivo a uma distncia mnima de 1,5 cm do corpo. IMPORTANT : A alimentao de energia predefinida para 220/230Vv. Se voc possuir tomada eltrica de 110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tenso correta. Avis pour le Canada Cet appareil numrique de Classe B respecte toutes les exigences des rglementations canadiennes sur les quipements pouvant causer des interfrences, CAN ICES-3(B)/NMB-3(B). Si cet appareil est quip de fonctions WLAN ou Bluetooth, il est conforme aux normes RSS exemptes de licence dictes par Industrie Canada. Son fonctionnement est soumis deux conditions : (1) cet appareil ne doit pas gnrer d'interfrence et (2) cet appareil doit supporter toutes les interfrences reues, y compris les interfrences qui pourraient entraner un dysfonctionnement de l'appareil. AVERTISSEMENT ! Exposition aux radiations de frquence radio : la puissance de rayonnement de cet appareil est infrieure aux limites d'exposition aux radiations mises par les frquences radio dictes par Industrie Canada. Toutefois, lappareil doit tre utilis dune manire conforme avec lutilisation normale attendue. Avis de rglementation pour la Bilorussie 3 Lorsque vous utilisez un rseau local sans fil IEEE 802.11a, n ou ac, abstenez-vous d'utiliser IMPORTANT :

ce matriel l'extrieur. En effet, il fonctionne dans la plage de frquences allant de 5,15 5,25 GHz. Industrie Canada exige que ce produit soit utilis l'intrieur d'un btiment pour la plage de frquence allant de 5,15 5,25 GHz afin de rduire le risque d'interfrences prjudiciables pour les systmes de satellites mobiles utilisant le mme canal. Les plages de 5,25 5,35 GHz et de 5,65 5,85 GHz sont alloues prioritairement aux radars haute puissance. Ces stations radar peuvent provoquer des interfrences avec cet appareil ou l'endommager. Les antennes de ce priphrique ne sont pas remplaables. Toute tentative d'accs par l'utilisateur endommagera l'ordinateur. Avis pour l'Union europenne Dclaration de conformit Les produits portant le marquage CE ont t conus de faon pouvoir fonctionner au moins dans un pays membre de lUE et sont conformes une ou plusieurs des directives de lUE suivantes, le cas chant :

RED 2014/53/EU ; Directive relative la basse tension 2014/35/EU ; Directive EMC 2014/30/EU ; Directive Ecodesign 2009/125/CE ; Directive RoHS 2011/65/CE. La conformit ces directives est value l'aide des normes harmonises europennes applicables. L'intgralit de la dclaration de conformit est disponible sur le site Web suivant : http://www.hp.eu/

certificates (recherchez le nom de modle du produit ou son numro de modle rglementaire (RMN), qui est indiqu sur l'tiquette de conformit). Pour toute question portant sur les rglementations, envoyez un courrier : HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Allemagne. Envoyez un courrier lectronique techregshelp@hp.com 4 Chapitre 1 Avis de conformit Produits quips de fonctionnalit radio Ce produit intgre un appareil de transmission et rception radiolectrique. Lors d'une utilisation standard d'un ordinateur portable, l'observation d'une distance de sparation de 20 cm permet aux niveaux d'exposition des frquences radio de respecter la conformit des normes de l'UE. Les produits conus pour une utilisation en de de cette distance, tels que les tablettes, respectent la conformit aux normes de l'UE applicables dans les positions de fonctionnement standard. Le produits peuvent tre utiliss sans garder une distance de sparation, sauf indication contraire dans les instructions spcifiques au produit. Restrictions pour les produits quips de fonctionnalit radio (certains produits uniquement) Le LAN sans fil IEEE 802,11x avec une bande de frquence de 5,15 5,35 GHz est IMPORTANT :

limit une utilisation intrieure uniquement dans l'ensemble des pays lists dans la matrice. Lutilisation de cette application WLAN en extrieur peut engendrer des problmes dinterfrences avec les services radio existants. IMPORTANT :

5766 GHz ) sont exclues pour l'ensemble des pays lists dans la matrice. Les installations extrieures fixes pour lapplication WiGig (bande de frquence Bandes de frquences radio et niveaux de puissance maximale (certains produits et pays uniquement) Puissance maximale de transmission PIRE (mW) Technologie Radio Bluetooth ; 2,4 GHz NFC ; 13,56 MHz RFID ; 125 kHz/13,56 MHz WLAN Wi-Fi 802.11 x ; 2,4 GHz WLAN Wi-Fi 802.11 x ; 5 GHz WWAN 3G UTMS ; 900/2100 MHz WWAN 2G GSM GPRS EDGE ; 900 MHz WWAN 2G GSM GPRS EDGE ; 1800 MHz WiGig 802.11ad ; 60 GHz WWAN 4G LTE ; 700/800/900/1800/2100/2300/2600/3500 MHz Moins de 1 100 10 100 200 200 250 2000 1000 316 REMARQUE : Utiliser uniquement les pilotes logiciels compatibles HP et corriger les paramtres rgionaux pour assurer la conformit. Avis sur l'ergonomie Lorsqu'un ordinateur portable est utilis sur une station de travail professionnelle dans le cadre d'un travail sur cran de visualisation o la directive 90/270/CEE relative aux crans de visualisation est applicable, un clavier externe adapt est recommand. Selon l'application et le travail ralis, un moniteur externe adapt peut galement tre ncessaire pour obtenir des conditions de travail comparables celles d'une station de travail. Avis pour l'Union europenne 5 Rf : EK1-ITB 2000 (certification GS volontaire) Les ordinateurs portables portant la marque d'homologation GS sont conformes aux exigences en matire d'ergonomie. Sans clavier externe, ils sont uniquement adapts aux tches ponctuelles sur cran de visualisation. Une utilisation mobile dans de mauvaises conditions de luminosit (par exemple, lumire directe du soleil) peut occasionner des reflets et donc rduire la lisibilit. Un systme informatique compos de produits de la marque HP respecte les exigences applicables relatives l'ergonomie si tous les produits inclus concerns portent la marque de conformit GS , par exemple un ordinateur de bureau professionnel, un clavier, une souris et un moniteur. Dclaration relative au rseau tlphonique europen (modem/fax) Le produit ci-joint est conforme aux spcifications de la directive applicable et porte en consquence la marque CE. Cependant, des diffrences existant entre les rseaux tlphoniques publics commuts (RTPC) nationaux prsents dans les diffrents pays/rgions, cette homologation en elle-mme ne garantit pas la russite de toutes les oprations sur tous les points de terminaison du RTPC. En cas de problme, prenez contact avec le fournisseur auprs duquel vous vous tes procur votre quipement. Avis pour l'Australie et la Nouvelle-Zlande Cet quipement intgre un appareil de transmission et rception radiolectrique. Lors d'une utilisation standard, l'observation d'une distance de sparation de 20 cm permet aux niveaux d'exposition des frquences radio de respecter la conformit des normes australiennes et no-zlandaises. L'ordinateur doit tre connect au rseau de tlcommunications par un cble rpondant aux critres de la norme AS/CA S008. AVERTISSEMENT !

pas tre installs dans un autre priphrique. Les modems sans connecteur RJ11 intgral qui sont livrs avec cet ordinateur ne doivent Avis WWAN pour la Chine Avis sur les quipements radio pour la Chine 6 Chapitre 1 Avis de conformit Avis pour le Japon V 2 VCCI32 1 5GHz Marques de certification des priphriques WLAN, WWAN et Bluetooth This product contains certified radio equipment. Some products may use electronic regulatory labels (e-labels). To view the certification mark and numbers on an e-label, please refer to the previous Accessing regulatory labels section.

(e ) e Avis pour le Mexique Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. El nmero de modelo reglamentario de este producto est en la etiqueta normativa. Si votre produit est fourni avec des accessoires sans fil, tels qu'un clavier ou une souris, et si vous devez identifier le modle de l'accessoire, reportez-vous l'tiquette appose sur cet accessoire. Le numro de modle rglementaire de ce produit se trouve sur l'tiquette rglementaire. Avis pour le Japon 7 Avis sur les appareils sans fil pour Singapour Mettez hors tension tout appareil rseau large bande sans fil (WWAN) lorsque vous tes bord d'un avion. L'utilisation de tels appareils bord d'un avion est illgale, peut tre dangereuse pour le fonctionnement de l'avion et peut perturber le rseau cellulaire. Le non-respect de cette instruction peut entraner la suspension ou le refus de services cellulaires au contrevenant, ou des actions juridiques, ou les deux. Les utilisateurs doivent limiter l'emploi d'quipement radio dans des dpts de carburant, usines chimiques et l o des explosions sont en cours. Comme pour les autres quipements mobiles de transmission par frquences radiolectriques, il est recommand aux utilisateurs, pour le bon fonctionnement de leur quipement et pour la scurit du personnel, de ne pas trop approcher les antennes du corps humain au cours du fonctionnement de l'quipement. Ce priphrique a t conu pour tre conforme aux exigences applicables pour l'exposition aux ondes radio, en fonction de normes scientifiques qui comprennent des plages destines assurer la scurit de tout le monde, quel que soit l'ge et l'tat de sant. Ces rgles d'exposition aux ondes radio utilisent une unit de mesure appele taux d'absorption spcifique (SAR - Specific Absorption Rate). Les tests relatifs aux taux d'absorption sont mens l'aide de mthodes standardises, le tlphone transmettant son niveau certifi le plus lev dans toutes les bandes de frquences utilises. Les informations de donnes SAR se basent sur les normes EN50360 et EN50361 de CENELEC, qui utilisent la limite de 2 watts par kilogramme, sur une moyenne de 10 grammes de tissu. Avis pour la Core du Sud Avis sur les priphriques sans fil pour la Thalande

(Cet quipement de tlcommunication se conforme aux exigences NBTC.) Cet quipement de communication radio possde une force de champ lectromagntique conforme la norme de scurit pour lutilisation dquipement de communication radio vis--vis de la sant des personnes annonce par la Commission nationale des tlcommunications. 8 Chapitre 1 Avis de conformit Avis de la NCC pour Tawan Priphriques WLAN 802.11a Priphriques sans fil LAN 802.11/Priphriques Bluetooth/Priphriques courte porte Avis sur les utilisations en vol L'utilisation d'appareils lectroniques bord des avions de ligne est laisse l'apprciation de la compagnie arienne. Avis sur les batteries remplaables par l'utilisateur Ne jetez pas les batteries ayant atteint leur dure de vie utile avec les ordures mnagres. Appliquez les lois et rglementations locales en matire de mise au rebut des batteries d'ordinateur. HP encourage ses clients recycler le matriel lectronique usag, les cartouches dimpression dorigine HP et les piles rechargeables. Pour plus d'informations sur les programmes de recyclage, consultez le site Web HP l'adresse http://www.hp.com/recycle. Pour des informations sur le retrait d'une batterie remplaable par l'utilisateur, reportez-vous au manuel de l'utilisateur livr avec le produit. Avis de la NCC pour Tawan 9 Avis sur les batteries scelles en usine La ou les batteries de ce produit ne peuvent pas tre facilement remplaces par les utilisateurs. Le retrait ou le remplacement de la batterie pourrait affecter votre droit la garantie. Si une batterie ne tient plus la charge, contactez le support. Ne jetez pas les batteries ayant atteint leur dure de vie utile avec les ordures mnagres. Appliquez les lois et rglementations locales en matire de mise au rebut des batteries. Conformit du laser AVERTISSEMENT !

indiques dans ce document ou dans le manuel d'installation d'appareils rayon laser, peut exposer l'utilisateur des radiations dangereuses. Pour rduire le risque d'exposition un rayonnement dangereux :

L'utilisation de mthodes de contrle ou de rglage ou de procdures, autres que celles N'essayez pas d'ouvrir le botier du module. Il ne contient pas de composant rparable par l'utilisateur. N'effectuez pas de commandes, de rglages ou d'oprations sur l'appareil laser, en dehors de ce qui est indiqu dans le manuel d'installation du produit laser. Seuls les mainteneurs agrs HP sont autoriss rparer l'unit. Ce produit peut tre fourni avec un priphrique de stockage optique (par exemple, un lecteur de CD ou DVD) et/ou un metteur-rcepteur fibre optique. Chacun de ces appareils qui contient un laser est class comme produit laser de classe 1 conformment la norme CEI/EN 60825-1 et rpond aux critres de scurit de cette norme. Chaque produit laser est conforme aux paragraphes 21 CFR 1040.10 et 1040.11 des rglementations FDA des tats-Unis ou est conforme ces rglementations l'exception des dviations relatives l'avis sur le laser No. 50, en date du 24 juin 2007. 10 Chapitre 1 Avis de conformit Homologations du priphrique de tlcommunication Le priphrique de tlcommunication de cet ordinateur est homologu pour une connexion au rseau tlphonique des pays et rgions dont les marques d'homologation apparaissent sur l'tiquette de produit situe sur la partie infrieure de l'ordinateur ou sur le modem. Reportez-vous au manuel de l'utilisateur livr avec le produit pour vous assurer que celui-ci est configur pour le pays ou rgion dans lequel ou laquelle il se trouve. La slection d'un pays ou d'une rgion autre que celui ou celle o se trouve le produit peut entraner une configuration du modem en violation des lois sur les tlcommunications de ce pays ou de cette rgion. De plus, il est possible que le modem ne fonctionne pas correctement si vous n'avez pas slectionn correctement le pays/la rgion. Si, lorsque vous slectionnez un pays ou une rgion, un message indique que votre pays ou rgion n'est pas pris en charge, cela signifie que le modem n'a pas t homologu dans ce pays ou cette rgion et qu'il ne doit donc pas tre utilis. Avis sur les modems Avis sur les modems pour les tats-Unis Ce matriel est conforme l'article 68 des rglementations de la FCC et aux conditions adoptes par l'ACTA. Une tiquette est appose sur la partie infrieure de l'ordinateur ou sur le modem. Elle inclut, entre autres informations, un identificateur de produit au format US:AAAEQ##TXXXX. Fournissez ces informations la compagnie tlphonique si elle vous y invite. Certification applicable de la prise USOC = RJ11C. La fiche et la prise utilises pour connecter ce matriel au cblage des locaux et au rseau tlphonique doivent tre conformes l'article 68 des rglementations de la FCC et aux conditions adoptes par l'ACTA. Un cordon tlphonique et une fiche modulaire conformes sont fournis avec ce produit. Ils sont conus pour tre connects une prise modulable galement conforme. Reportez-vous aux instructions d'installation pour plus d'informations. Le REN est utilis pour dterminer le nombre de priphriques qui peuvent tre connects une ligne tlphonique. Si la ligne tlphonique regroupe un nombre trop important de REN, les priphriques peuvent ne pas sonner lors d'un appel entrant. Dans la plupart des emplacements, la somme des REN ne doit pas dpasser cinq (5). Pour connatre avec certitude le nombre de priphriques qui peuvent tre connects une ligne, et donc le nombre total de REN, contactez votre compagnie tlphonique. Pour les produits homologus aprs le 23 juillet 2001, le REN fait partie de l'identificateur de produit dont le format est US:AAAEQ##TXXXX. Les chiffres reprsents par le signe ## constituent le REN sans virgule (par exemple, 03 reprsente un REN de 0,3). Pour les produits antrieurs, le REN est indiqu sparment sur l'tiquette. Si ce matriel HP dgrade le rseau tlphonique, la compagnie tlphonique vous avertira l'avance qu'une interruption du service peut tre requise. S'il n'est pas possible de vous informer de cette interruption l'avance, la compagnie vous avertira au plus vite. En outre, vous serez inform de votre droit dposer une rclamation auprs de la FCC si vous pensez que cela n'est ncessaire. La compagnie tlphonique peut apporter des modifications ses installations, quipements, oprations ou procdures pouvant affecter le bon fonctionnement du matriel. Dans ce cas, il vous en informera l'avance afin que vous puissiez prendre les mesures ncessaires pour assurer un service tlphonique ininterrompu. Si vous rencontrez des problmes avec cet quipement, contactez le support technique. S'il dtriore le rseau tlphonique, la compagnie tlphonique peut vous demander de le dconnecter jusqu' ce que le problme soit rsolu. Les seules rparations que vous pouvez effectuer sont celles qui sont prsentes dans la section Rsolution des problmes du manuel de l'utilisateur, si ce dernier est fourni. La connexion des lignes partages est soumise des taxes dpendant de chaque tat. Pour plus d'informations, contactez la commission des services publics ou la commission des entreprises. Homologations du priphrique de tlcommunication 11 Si votre domicile est quip d'un dispositif d'alarme spcial connect la ligne tlphonique, vrifiez que l'installation de ce matriel HP ne le dsactive pas. Pour toute question concernant les quipements susceptibles de dsactiver votre alarme, consultez votre compagnie tlphonique ou un installateur qualifi. Le Telephone Consumer Protection Act de 1991 rend illgal le fait d'utiliser un ordinateur ou tout autre dispositif lectronique, y compris un tlcopieur, pour envoyer des messages ne contenant pas clairement, dans une marge situe dans la partie suprieure ou infrieure de chaque page transmise ou sur la premire page de chaque transmission, la date et l'heure de l'envoi, ainsi que des lments identifiant l'entreprise, l'entit ou la personne l'origine du message, ainsi que le numro de tlphone de la machine expditrice, de l'entreprise, de l'entit ou de la personne. (Le numro de tlphone fourni ne peut pas tre un numro en 900 ou tout autre numro dont le cot dpasse celui d'un appel local ou longue distance.) Pour programmer ces informations dans votre tlcopieur, vous devez suivre la procdure dcrite dans les instructions du logiciel de tlcopie. 12 Chapitre 1 Avis de conformit Dclarations sur les modems pour les tats-Unis Reportez-vous la dclaration suivante du fournisseur du modem concernant le priphrique de modem install dans votre ordinateur :

Avis sur les modems 13 Avis sur les modems pour le Canada Cet quipement est conforme aux spcifications techniques d'Industrie Canada applicables. Le REN indique le nombre maximal d'appareils pouvant tre connects une interface tlphonique. La terminaison d'une interface peut consister en une combinaison d'appareils quelconque condition que la somme des REN de ces dispositifs ne dpasse pas 5. Le REN de ce terminal de communication est 1. Avis sur les modems pour le Japon Si l'ordinateur ne possde pas la marque de certification des priphriques japonais sur sa partie infrieure, reportez-vous la marque de certification approprie ci-dessous. La marque de certification des priphriques japonais pour le modem tlcopie/donnes V.92 56K est illustre ci-dessous :

Si l'ordinateur ne possde pas la marque de certification des priphriques japonais sur sa partie infrieure, reportez-vous la marque de certification approprie ci-dessous. La marque de certification des priphriques japonais pour le modem LSI Corporation PCI-SV92EX Soft est illustre ci-dessous :

14 Chapitre 1 Avis de conformit Dclarations sur les modems pour la Nouvelle-Zlande L'octroi d'un Telepermit pour n'importe quel terminal de tlcommunication indique uniquement que Telecom certifie que l'quipement est bien conforme aux exigences minimales de connexion son rseau. Il ne constitue aucunement une prise de responsabilit quant au produit par Telecom, et n'apporte aucune sorte de garantie. Plus particulirement, il n'apporte aucune garantie que l'quipement fonctionnera correctement et en tous points avec un autre quipement Telepermit d'une marque ou d'un modle diffrent, et ne signifie pas non plus qu'un produit est compatible avec l'ensemble des services du rseau Telecom. Quelles que soient les conditions d'utilisation, ce matriel ne peut fonctionner correctement aux vitesses suprieures celles pour lesquelles il a t conu. Telecom dcline toute responsabilit si des difficults devaient apparatre dans de telles circonstances. Si cet quipement est dot de la composition impulsions, Telecom ne garantit pas la prise en charge de celle-ci par la ligne. L'utilisation de la composition impulsions, sur une ligne partage par plusieurs dispositifs, peut provoquer un dclenchement de la sonnerie ou des parasites et galement une rponse errone. Si ce type de problme se produit, l'utilisateur ne doit pas contacter les services techniques de Telecom Nouvelle-Zlande. Certains paramtres ncessaires pour une conformit avec les exigences Telepermit de Telecom dpendent du matriel (PC) associ cet appareil. Le matriel associ doit tre configur de manire fonctionner dans les limites prescrites pour tre conforme aux spcifications Telecom :

a. b. c. d. Chaque appel manuel ne dpassera pas 10 tentatives d'appel au mme numro dans un intervalle de 30 minutes. Le matriel doit rester l'tat raccroch pendant une priode d'au moins 30 secondes entre la fin d'une tentative d'appel et le dbut de la tentative suivante. Lorsque des appels automatiques sont passs divers numros, le matriel doit tre configur pour passer l'tat raccroch pendant une priode d'au moins 5 secondes entre la fin d'une tentative d'appel et le dbut de la tentative suivante. Le matriel doit tre configur de telle manire que les appels soient traits dans un dlai de 3 30 secondes partir de la rception de la sonnerie (il doit donc tre configur entre 2 et 10 secondes). Prise en charge vocale Toutes les personnes qui utilisent cet appareil pour enregistrer des conversations tlphoniques doivent se soumettre la lgislation de la Nouvelle-Zlande. Celle-ci exige qu'au moins une des deux parties participant la conversation soit au courant de l'enregistrement. En outre, les principes relatifs la nature des informations personnelles recueillies, aux objectifs de leur collecte, leur utilisation et la divulgation de ces informations des tiers, principes rpertoris dans la loi sur la protection de la vie prive de 1993, doivent tre respects. Ce matriel ne doit pas tre configur de manire passer des appels automatiques au numro d'urgence

(111) mis en place par Telecom. Avis de Macrovision Corporation Ce produit inclut une technologie de protection de copyright protge par des dclarations de mthode de certains brevets amricains et d'autres droits de proprit intellectuelle appartenant Macrovision Corporation et autres dtenteurs de droits. L'utilisation de cette technologie de protection des droits d'auteur doit tre autorise par Macrovision Corporation et a pour but de permettre un visionnage domestique et d'autres utilisations limites uniquement, sauf autorisation de Macrovision Corporation. L'ingnierie inverse et le dsassemblage sont interdits. Avis de Macrovision Corporation 15 2 Avis relatifs la scurit Informations importantes relatives la scurit AVERTISSEMENT ! Pour rduire les risques de blessures graves, lisez le manuel Scurit et ergonomie du poste de travail. Il dcrit l'installation du poste de travail, la posture ainsi que les conditions de scurit et de travail appropries pour les utilisateurs, et fournit des informations importantes sur la scurit lectrique et mcanique. Vous trouverez ce manuel sur le Web l'adresse http://www.hp.com/ergo, ainsi que sur le CD de documentation qui accompagne le produit. L'ordinateur peut tre trs lourd ; assurez-vous d'adopter une position ergonomique adquate lors de sa manipulation. Installez l'ordinateur proximit d'une prise secteur. Le cordon d'alimentation secteur constitue le principal dispositif de dconnexion secteur de votre ordinateur et doit donc tre facilement accessible. Si le cordon dalimentation fourni avec votre ordinateur est quip dune fiche de mise la terre, utilisez toujours le cordon dalimentation avec une prise secteur correctement relie la terre, afin dviter tout risque de choc lectrique. Pour rduire les risques de choc lectrique en provenance du rseau tlphonique, branchez votre ordinateur sur une prise secteur avant de le connecter une ligne tlphonique. Par ailleurs, dconnectez votre ligne tlphonique avant de dbrancher votre ordinateur de la prise secteur. Dbranchez le cordon du modem du rseau tlphonique avant d'installer ou d'enlever le capot de votre ordinateur. N'utilisez pas l'ordinateur lorsque le capot est enlev. Pour plus de scurit, dbranchez toujours l'ordinateur de sa source d'alimentation, de tout systme de tlcommunications (comme les lignes tlphoniques), des rseaux et des modems avant d'excuter toute opration de maintenance. Si vous ne respectez pas ces consignes, vous risquez de vous blesser ou de causer des dommages matriels. Le modem et l'alimentation de ce produit renferment des niveaux de tension dangereux. Par mesure de scurit, si la charge dalimentation lectrique du systme dpasse les capacits de la configuration spcifique, le systme peut dsactiver temporairement certains ports USB. AVERTISSEMENT ! Pour rduire le risque d'incendie, de choc lectrique et de blessure lors de l'utilisation de ce priphrique, suivez systmatiquement les consignes de scurit de base, notamment :

N'utilisez pas l'appareil proximit de l'eau,par exemple prs d'une baignoire, d'un lavabo, d'un vier ou d'une piscine, ou encore dans une cave humide. vitez d'utiliser l'appareil pendant un orage. Il existe un risque d'lectrocution d la foudre. N'utilisez jamais cet appareil pour signaler une fuite de gaz si vous vous trouvez proximit de la fuite. Dbranchez systmatiquement le cble du modem avant d'ouvrir l'enceinte de l'appareil ou de toucher un cble modem non isol, une prise jack ou un composant interne. Si le produit n'est pas fourni avec un cble tlphonique, utilisez exclusivement un cble de tlcommunication 26 AWG ou suprieur. Ne branchez pas un cble de modem ou de tlphone sur la prise rseau (RJ-45). CONSERVEZ CES INSTRUCTIONS. 16 Chapitre 2 Avis relatifs la scurit IMPORTANT : Si votre ordinateur est quip dun commutateur de tension pour une utilisation dans un systme lectrique 115 ou 230 V, le commutateur a t prrgl sur la tension correcte qui correspond celle utilise dans le pays ou la rgion o il a t vendu l'origine. Mettre le commutateur sur la mauvaise position peut endommager lordinateur et annuler toute garantie implicite. Ce produit n'a pas t valu pour une connexion un systme d'alimentation informatique (un systme de distribution de courant alternatif sans connexion directe la terre, selon les normes de scurit applicables). Notice davertissement relative la scurit lie la chaleur AVERTISSEMENT ! Pour viter tout risque de blessure associe la chaleur ou de surchauffe de l'ordinateur portable, ne placez pas ce dernier sur vos genoux et n'obstruez pas ses ouvertures d'aration. Utilisez toujours l'ordinateur portable sur une surface plane et rigide. La ventilation ne doit pas tre entrave par des lments rigides, tels qu'une imprimante, ni par des lments souples, tels que des coussins, du tissu ou un tapis pais. De mme, l'adaptateur secteur ne doit rester en contact ni avec la peau ni avec un lment souple, tel que des coussins, un vtement ou un tapis lorsque l'ordinateur est en cours de fonctionnement. L'ordinateur portable et l'adaptateur secteur sont conformes aux limites de temprature de surface accessibles l'utilisateur, dfinies par les normes de scurit applicables. Avis sur les risques lis la scurit Si vous observez l'une des situations suivantes (ou avez d'autres inquitudes en matire de scurit), n'utilisez pas l'ordinateur : bruit de crpitement, de sifflement ou de claquement ou forte odeur/fume en provenance de l'ordinateur. La survenue de l'une de ces situations est normale en cas de dfaillance d'un composant lectronique interne de manire neutralise et contrle. Cependant, ces situations peuvent galement indiquer un risque de scurit. Ne partez pas du principe qu'il s'agit d'une dfaillance neutralise. Mettez l'ordinateur hors tension, dconnectez-le de sa source d'alimentation, puis contactez l'assistance technique. Conditions d'installation Consultez les instructions d'installation avant de brancher cet quipement sur l'alimentation. AVERTISSEMENT ! Cet ordinateur peut contenir des pices sous tension et amovibles. Dbranchez le cordon d'alimentation avant de retirer le botier. Remettez le botier bien en place avant de remettre l'ordinateur sous tension. Notice davertissement relative la scurit lie la chaleur 17 Avis sur lacoustique Le niveau de pression acoustique (LpA) est extrmement en de de 70dB(A) (position de loprateur, fonctionnement normal, selon la norme ISO 7779). Pour afficher les donnes dmission sonore du produit, rendez-vous sur Dclarations IT ECO http://www.hp.com/go/ted, puis slectionnez une catgorie de produit dans le menu droulant. Avis relatif aux batteries AVERTISSEMENT !

lithium, au pentoxyde de vanadium ou alcaline. Un risque d'explosion ou de brlure existe en cas de manipulation incorrecte du module de batteries. Le produit peut contenir un module de batteries interne au dioxyde de manganse/

AVERTISSEMENT ! Ne pas essayer de recharger la pile. AVERTISSEMENT ! vitez de la soumettre des tempratures suprieures 60 C (140 F). AVERTISSEMENT ! Pour limiter les risques lis la scurit, seule la batterie fournie avec lordinateur, une batterie de rechange fournie par HP ou une batterie compatible achete comme accessoire auprs de HP doit tre utilise avec lordinateur. Le chargement rapide peut ne pas tre disponible pour les batteries autres que HP ou non compatibles. AVERTISSEMENT ! Pour rduire tout risque d'incendie ou de brlure, vous ne devez pas le dsassembler, l'craser, le perforer, mettre nu ses contacts ni le jeter dans le feu ou dans l'eau. AVERTISSEMENT !

d'un type incorrect. liminez les batteries usages en respectant les instructions. Il existe un risque d'explosion en cas de remplacement de la batterie par une batterie AVERTISSEMENT ! Remplacez uniquement par une batterie HP prvue pour ce produit. AVERTISSEMENT ! Ne pas ingrer la batterie, risque de brlure chimique. AVERTISSEMENT ! Ce produit contient une pile bouton. Si la pile bouton est ingre, elle peut causer des brlures internes graves en moins de 2 heures et peut entraner la mort. AVERTISSEMENT ! Conservez les batteries neuves et usages hors de porte des enfants. AVERTISSEMENT ! Si le compartiment de la batterie nest pas ferm convenablement, arrtez dutiliser le produit et gardez hors de porte des enfants. AVERTISSEMENT ! Si vous pensez que des batteries ont pu avoir t ingres ou places lintrieur de toute partie du corps, consulter immdiatement un mdecin. AVERTISSEMENT ! Si vous laissez une batterie dans un environnement comportant une temprature extrmement leve, cela peut entraner une explosion ou la fuite du gaz ou liquide inflammable. AVERTISSEMENT ! Une batterie soumise une pression dair trs faible peut entraner une explosion ou la fuite du gaz ou liquide inflammable. Icne Description Les piles, modules de batterie et accumulateurs ne doivent pas tre jets avec les ordures mnagres. Pour permettre leur recyclage ou leur mise au rebut, veuillez utiliser les systmes de collecte publique ou renvoyez-

les HP, un partenaire HP agr ou leurs agents. 18 Chapitre 2 Avis relatifs la scurit Avis sur le ventilateur AVERTISSEMENT !

Conservez les pices fixes loignes des parties mobiles. AVERTISSEMENT ! Conservez les pices fixes loignes des hlices du ventilateur. AVERTISSEMENT ! Conservez les pices fixes hors de la trajectoire de mouvement. Avis sur le niveau du volume du casque et des couteurs AVERTISSEMENT !

Pour viter les dommages causs votre systme auditif, n'coutez pas des volumes levs pendant des priodes prolonges. Le rglage de la commande de volume, ainsi que du balancier compensateur dautres paramtres hors de la position centrale peut augmenter la tension de sortie du casque/des couteurs et par consquent le niveau de pression acoustique. Lutilisation de facteurs influenant la sortie casque/couteurs autres que ceux spcifis par le fabricant (par exemple systme dexploitation, logiciel dgalisation, microprogramme, pilote) peut augmenter la tension de sortie du casque/des couteurs et par consquent le niveau de pression acoustique. Scurit des lasers Pour les produits quips d'units optiques ou d'metteurs fibre optique. Ce produit peut tre quip d'un priphrique de stockage optique (c'est--dire un lecteur CD ou DVD) et/ou d'un metteur-rcepteur fibre optique. Ces lments comportent des lasers classs dans la catgorie des produits laser de classe 1, conformment la norme IEC/EN 60825-1, et sont conformes ses exigences. Chacun de ces produits laser est conforme aux rgulations 21 CFR 1040.10 et 1040.11 de la US FDA ou est conforme ces normes l'exception des diffrences conformment la notice des lasers No. 50, du 24 Juin 2007. AVERTISSEMENT !

indiques dans ce document ou dans le manuel d'installation des appareils rayon laser, peut exposer l'utilisateur des radiations dangereuses. Pour rduire le risque d'exposition un rayonnement dangereux :

L'utilisation de mthodes de contrle ou de rglage ou de procdures, autres que celles N'essayez pas d'ouvrir le botier du module. Il ne contient pas de composant rparable par l'utilisateur. N'effectuez pas de commandes, de rglages ou d'oprations sur l'appareil laser, en dehors de ce qui est indiqu dans le prsent manuel. Seuls les techniciens agrs HP sont autoriss rparer l'unit. Exigences relatives au bloc d'alimentation et au cordon d'alimentation Exigences relatives la mise la terre des alimentations de classe 1 Pour une protection contre les dfauts de courant, l'quipement doit tre connect une borne de terre. Branchez le cordon d'alimentation du systme sur une prise secteur fournissant une connexion de masse. Tout cordon alternatif risquerait de ne pas fournir une protection adquate contre les dfauts. Utilisez uniquement le cordon d'alimentation fourni avec ce produit ou un produit de remplacement agr par HP Inc. Avis sur le ventilateur 19 Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia eltrica que possua aterramento (trs pinos), conforme a norma nbr abnt 5410,visando a segurana dos usurios contra choques eltricos. Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. Avis pour le Brsil Danemark Finlande Norvge Sude Laite on liitettv suojakoskettimilla varustettuun pistorasiaan. Apparatet m tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Exigences relatives au bloc d'alimentation Les alimentations sur certains produits sont quipes de commutateurs de tension externes. La fonction de slection de tension sur le produit autorise son fonctionnement sous toute tension comprise entre 100-127 ou 200-240 volts secteur. Les alimentations sur les produits dpourvus de commutateurs de tension externes sont quipes de circuits internes qui dtectent la tension d'entre et basculent automatiquement sur la tension approprie. AVERTISSEMENT ! Pour limiter les problmes de scurit potentiels, utilisez avec cet ordinateur uniquement l'adaptateur secteur fourni avec l'ordinateur, un adaptateur secteur de remplacement fourni par HP ou un adaptateur secteur achet comme accessoire auprs de HP. Pour une utilisation en Norvge Ce produit est galement conu pour un systme lectrique informatique avec tension phase-phase de 230 V. Exigences relatives au cordon d'alimentation AVERTISSEMENT ! Pour rduire les risques de choc lectrique ou de dtrioration du matriel :

Branchez le cordon d'alimentation sur une prise secteur facilement accessible tout moment. Coupez l'alimentation de l'ordinateur en dbranchant le cordon d'alimentation de la prise secteur. Si l'ordinateur portable est fourni avec une fiche tripolaire, branchez le cordon sur une prise lectrique tripolaire relie la terre. Ne dsactivez pas la broche de mise la terre du cordon d'alimentation en utilisant, par exemple, un adaptateur bipolaire. La broche de mise la terre constitue un lment de scurit essentiel. Le jeu de cordon d'alimentation livr avec le produit est conforme aux exigences du pays dans lequel l'quipement a t achet. Utilisez uniquement le cordon d'alimentation fourni avec l'appareil ou un cordon d'alimentation de remplacement fourni par HP Inc. ou par un revendeur agr par HP Inc. Les rfrences de pices de rechange sont disponibles l'adresse http://www.hp.com/support. 20 Chapitre 2 Avis relatifs la scurit Les cordons d'alimentation destins tre utiliss dans d'autres pays doivent respecter les normes du pays o vous utilisez le produit. Pour plus d'informations sur les exigences de cordon d'alimentation, contactez votre revendeur, votre mainteneur ou votre fournisseur de services agr HP. AVERTISSEMENT ! N'utilisez pas de cordons d'alimentation d'autres produits. Un mauvais cordon d'alimentation peut entraner un risque de dcharge lectrique ou d'incendie. Les exigences prsentes ci-aprs s'appliquent tous les pays. 1. 2. Le cordon d'alimentation doit tre homologu par une agence accrdite, responsable de l'valuation dans le pays o le cordon sera install. La longueur du cordon doit tre comprise entre 1,8 m (6 pieds) et 3,6 m (12 pieds). Pour un cordon d'alimentation de 2 m (6,56 pieds) ou moins, le diamtre du cordon doit tre d'au minimum 0,75 mm2 ou 18 AWG. Si le cordon d'alimentation dpasse 2 m (6,56 pieds), le diamtre du cordon doit tre d'au minimum 1 mm2 ou 16 AWG. Le cordon d'alimentation doit tre branch un endroit dgag o il ne risque pas d'tre pitin ou coinc par des objets. Accordez une attention particulire la fiche, la prise murale et l'endroit o le cordon sort du botier de l'appareil. AVERTISSEMENT ! N'utilisez pas ce produit avec un cordon d'alimentation endommag. Si le cordon d'alimentation est endommag de quelque manire que ce soit, remplacez-le immdiatement. Un cordon endommag peut entraner des risques de blessure. Exigences relatives au bloc d'alimentation et au cordon d'alimentation 21 Informations sur le cordon d'alimentation Si votre ordinateur ne vous a pas t livr avec un cordon d'alimentation ou un accessoire d'alimentation secteur compatible avec votre ordinateur, vous devrez acheter un cordon d'alimentation homologu pour votre pays ou votre rgion. Les caractristiques lectriques du cordon dalimentation doivent correspondre la tension et au courant du produit tels quindiqus sur ltiquette des caractristiques lectriques du produit. Les valeurs nominales de tension et d'intensit du cordon doivent tre suprieures celles indiques sur l'ordinateur. En outre, le diamtre du cordon doit tre au minimum de 0,75 mm/18 AWG et sa longueur doit tre comprise entre 1 et 2 m. Si vous avez des questions sur le type de cordon d'alimentation utiliser, contactez votre fournisseur de service agr. Le cordon dalimentation doit tre plac de sorte que personne ne puisse marcher dessus ou quil ne puisse tre pinc par des lments placs contre ou sur le fil. Prtez tout particulirement attention la fiche, la prise murale et au point o le cordon dalimentation sort du produit. prise CC de la source d'alimentation externe HP Avis sur les cordons d'alimentation pour le Japon Spcifications du cordon d'alimentation pour le Japon Pour une utilisation au Japon, utilisez uniquement le cordon d'alimentation fourni avec l'appareil. ATTENTION : N'utilisez pas le cordon d'alimentation fourni avec ce produit pour alimenter d'autres appareils. Risque de pincement AVERTISSEMENT ! Observez les zones risque de pincement. N'approchez pas vos doigts des pices se refermant. Protection des connecteurs de l'antenne TV Mise la terre d'une antenne de tlvision externe Si une antenne externe ou un systme par cble est connect(e) ce produit, assurez-vous que l'antenne ou le systme par cble est mis(e) la terre lectriquement de faon vous protger contre les surtensions et les accumulations d'lectricit statique. L'article 810 du code lectrique national (ANSI/NFPA 70) fournit des informations sur la mise la terre de la monture et de la structure portante, la mise la terre du fil d'entre vers un dispositif de dcharge de l'antenne, la taille des conducteurs de mise la terre, l'emplacement du dispositif de dcharge de l'antenne, la connexion aux lectrodes de terre et les exigences relatives aux lectrodes de terre. 22 Chapitre 2 Avis relatifs la scurit Protection contre la foudre Pour mieux protger votre produit durant un orage ou lorsqu'il reste inutilis et sans surveillance pendant une priode prolonge, dbranchez le cble de raccordement lectrique, puis l'antenne ou le systme par cble. Vous viterez ainsi que la foudre ou des surtensions n'endommagent le produit. Tableau 2-1 Mise la terre de l'antenne Rfrence Composant de mise la terre Compteur lectrique extrieur 1 2 3 4 5 6 7 Systme d'lectrode de mise terre du compteur lectrique (code lectrique national, article 250, partie III) Conducteurs de mise la terre (code lectrique national, section 810.21) Dispositif de dcharge de l'antenne (code lectrique national, section 810.20) Colliers de mise la terre Collier de mise la terre Fil d'entre de l'antenne Remarque destine aux installateurs de systmes de tlvision par cble Ce rappel a pour but d'attirer l'attention des installateurs de systmes de tlvision par cble sur la section 820.93 du code lectrique national, qui fournit des directives pour la mise la terre et spcifie notamment que le blindage du cble coaxial doit tre connect au systme de mise la terre du btiment, aussi prs que possible du point d'entre du cble. Avis sur les dplacements AVERTISSEMENT ! Afin de rduire le risque de choc lectrique, d'incendie ou de dtrioration du matriel, n'essayez pas d'alimenter l'ordinateur au moyen d'un kit de conversion de tension destin aux quipements mnagers. Avis sur les dplacements 23 Avis de scurit pour la Chine Chine : avis sur l'altitude 2000m Icne Description 2000m Chine : avis sur une utilisation dans des conditions tropicales Icne Description 24 Chapitre 2 Avis relatifs la scurit Norvge et Sude : Avis de mise la terre des cbles pour les produits quips dune carte TV ATTENTION : Pour rduire les problmes de scurit potentiels, utilisez un sectionneur galvanique pour le branchement un rseau de distribution par cble.

(1) 30 10

(2) 2 2 1 Norvge et Sude : Avis de mise la terre des cbles pour les produits quips dune carte TV 25 3 Avis des agences environnementales Ce chapitre prsente des avis relatifs l'environnement des diffrents pays ou rgions et des informations de conformit. Certains de ces avis peuvent ne pas s'appliquer votre produit. Recyclage du matriel lectronique, de l'emballage et de la batterie HP encourage ses clients recycler le matriel lectronique usag, l'emballage des cartouches dimpression dorigine HP et les piles rechargeables. Pour plus d'informations sur les programmes de recyclage, rendez-

vous sur http://www.hp.com/recycle. Pour obtenir des informations concernant le recyclage du produit au Japon, reportez-vous http://www.hp.com/jp/hardwarerecycle/. Mise au rebut des quipements par les utilisateurs Icne Description Ce symbole indique que vous ne devez pas jeter votre produit avec les dchets mnagers. Il est de votre responsabilit de protger la sant et l'environnement et d'liminer votre quipement en le remettant une dchetterie effectuant le recyclage des quipements lectriques et lectroniques. Pour plus d'informations, prenez contact avec votre service d'limination des ordures mnagres ou ouvrez la page http://www.hp.com/

recycle. Mise au rebut des batteries alcalines au Brsil Icne Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes, inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar No descarte o produto eletrnico em lixo comum Informations sur le recyclage du matriel au Brsil Icne Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. 26 Chapitre 3 Avis des agences environnementales Para maiores informaes, inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar Icne Description No descarte o produto eletrnico em lixo comum Icne Description Informations de recyclage de la pile pour Taiwan Taiwan EPA demande aux fabricants ou aux importateurs de piles, conformment l'Article 15 de la loi relative la mise au rebut (Waste Disposal Act), d'indiquer les mentions de rcupration des piles usages dans des points de vente, brochures ou publicits. Contactez une entreprise de recyclage qualifie pour la mise au rebut approprie de la pile. Certification ENERGY STAR (certains produits uniquement) ENERGY STAR est un programme de l'agence de protection environnementale des tats-Unis qui aide les entreprises et les personnes conomiser de l'argent et protger le climat par le biais de l'utilisation de produits prsentant une efficacit nergtique suprieure. Les produits certifis ENERGY STAR limitent les missions de gaz effet de serre en rpondant aux critres d'efficacit nergtique stricts dicts par l'Agence de protection environnementale des tats-Unis. En tant que partenaire ENERGY STAR, HP Inc. a suivi le processus avanc de certification des produits de l'EPA pour s'assurer que les produits portant le logo ENERGY STAR respectaient les rglementations ENERGY STAR. Le logo suivant apparat sur tous les ordinateurs respectant les spcifications ENERGY STAR :

Une exigence cl du programme ENERGY STAR pour les produits informatiques rside dans l'inclusion de fonctions de gestion de l'alimentation permettant de rduire sensiblement la consommation d'nergie lorsque le produit n'est pas utilis. La gestion de l'alimentation permet un ordinateur de passer automatiquement dans un mode basse consommation veille ou tout autre mode basse consommation, aprs une priode dfinie d'inactivit. Les fonctions de gestion de l'alimentation ont t prdfinies comme suit lorsque l'ordinateur fonctionne sur secteur :

Type d'ordinateur Dlai d'activation du mode veille de l'cran Dlai d'activation du mode veille de l'ordinateur (en minutes) Sortie du mode veille Notebooks, stations de travail mobiles

<= 15 minutes (selon le modle)

<= 30 minutes (selon le modle) Tablettes

<= 1 minute Non applicable Non applicable Ordinateurs de bureau, ordinateurs de bureau intgrs, stations de travail

<= 15 minutes (selon le modle)

<= 30 minutes (selon le modle) Le produit quitte le mode veille lorsque vous appuyez sur le bouton d'alimentation/veille. Si le Wake on Lan (WOL) est activ, le systme peut sortir du mode veille en rponse un signal rseau. Le produit quitte le mode veille lorsque l'utilisateur interagit avec un priphrique d'entre, y compris la souris ou le clavier. Informations de recyclage de la pile pour Taiwan 27 Type d'ordinateur Dlai d'activation du mode veille de l'cran Dlai d'activation du mode veille de l'ordinateur (en minutes) Sortie du mode veille Clients lgers

<= 15 minutes (selon le modle)

<= 30 minutes lorsque le mode veille est pris en charge par le systme d'exploitation (selon le modle) Si le Wake on Lan (WOL) est activ, le systme peut sortir du mode veille en rponse un signal rseau. Si le mode veille est pris en charge par le systme d'exploitation, le produit quitte le mode veille lorsque l'utilisateur interagit avec un priphrique d'entre, y compris la souris ou le clavier. Si le Wake on Lan (WOL) est activ, le systme peut sortir du mode veille en rponse un signal rseau. Pour les ordinateurs prenant en charge un profil d'utilisation toujours sous tension, toujours connect o l'accs Internet reste actif (par exemple sur les tablettes), des modes d'alimentation basse consommation alternatifs, comme les modes d'inactivit courte ou d'inactivit prolonge (tels que dfinis dans les exigences du programme ENERGY STAR pour les ordinateurs) sont fournis. Ils consomment trs peu d'nergie (<=

10 Watts) et le cas chant, optimisent l'autonomie du produit. Ces modes alternatifs sont dynamiques. Le mode veille de l'cran est activ aprs 1 minute d'inactivit de l'utilisateur. L'ordinateur quitte le mode veille lorsque vous appuyez sur le bouton d'alimentation/veille. Lorsque la fonction Wake On LAN (WOL) est active, l'ordinateur peut galement quitter le mode veille en rponse un signal rseau. Plus d'informations sur les conomies nergtiques et financires potentielles lies aux fonctions de gestion de l'alimentation sont prsentes sur le site Web de gestion de l'alimentation ENERGY STAR de l'EPA l'adresse http://www.energystar.gov/powermanagement. Plus d'informations sur le programme ENERGY STAR et ses avantages pour l'environnement sont disponibles sur le site Web ENERGY STAR de l'EPA l'adresse http://www.energystar.gov. ENERGY STAR et le label ENERGY STAR sont des marques dposes dtenues par l'Agence de protection environnementale des tats-Unis. Substances chimiques HP s'engage fournir ses clients des informations sur les substances chimiques contenues dans ses produits, conformment aux normes juridiques en vigueur telles que le rglement concernant l'enregistrement, l'valuation et l'autorisation des substances chimiques, ainsi que les restrictions applicables ces substances (REACH, rglement CE N 1907/2006 du Parlement europen et du Conseil). Des informations sur les substances chimiques contenues dans ce produit sont disponibles l'adresse http://www.hp.com/go/reach. Avis sur le mercure Cette dclaration s'applique tous les ordinateurs tout-en-un quips d'crans intgrs qui n'utilisent pas le rtroclairage LED. 28 Chapitre 3 Avis des agences environnementales Ce produit HP peut contenir les matriaux suivants qui requirent un traitement spcial la fin de leur cycle de vie :

Le mercure contenu dans la lampe fluorescente de l'cran cristaux liquides (LCD) Il se peut que l'limination du mercure soit rglemente en raison de considrations environnementales. Pour obtenir des informations sur l'limination et le traitement de cette substance, veuillez contacter les autorits locales concernes ou l'Electronic Industries Alliance (EIA) (http://www.eiae.org). Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire La batterie de l'horloge en temps rel est susceptible de contenir du perchlorate et peut ncessiter une manipulation particulire lors de son recyclage ou de sa mise au rebut en Californie. Reportez-vous au site http://www.dtsc.ca.gov/hazardouswaste/perchlorate/. Avis sur l'environnement pour la Chine tiquette de consommation nergtique des ordinateurs pour la Chine Conformment la rglementation sur la mise en place d'une tiquette de consommation nergtique des micro-ordinateurs pour la Chine, ce micro-ordinateur est quip d'une tiquette d'efficacit nergtique. La classe d'efficacit nergtique (consommation nergtique typique) et la catgorie de produit, prsentes sur l'tiquette, sont dtermines et calcules selon la norme GB28380-2012. 1. Classes d'efficacit nergtique La classe est dtermine par la norme en calculant le niveau de consommation de base et en ajoutant la consommation des lments supplmentaires, tels que la mmoire principale et les cartes graphiques. Quelle que soit la classe, la consommation nergtique typique ne doit pas dpasser la valeur indique dans le tableau suivant :

Type de produit Consommation nergtique typique (kilowatt-heure) Micro-ordinateur de bureau, tout-en-un Catgorie A Classe 1 98+Efa Classe 2 Classe 3 148+Efa 198+Efa Catgorie B 125+Efa Catgorie C 159+Efa Catgorie D 184+Efa 175+Efa 209+Efa 234+Efa 35+Efa 225+Efa 259+Efa 284+Efa 45+Efa Ordinateur portable Catgorie A 20+Efa Matriau compos de perchlorate : une manipulation particulire peut tre ncessaire 29 Type de produit Consommation nergtique typique (kilowatt-heure) Catgorie B 26+Efa 45+Efa 65+Efa Catgorie C 54,5+Efa 75,0+Efa 123,5+Efa REMARQUE : EFA est la somme du facteur de puissance de fonctions suppmentaires du produit. 2. Consommation nergtique typique Le chiffre de la consommation nergtique indiqu sur l'tiquette correspond aux donnes mesures avec la configuration reprsentative qui couvre toutes les configurations de l'unit d'enregistrement slectionne conformment la Rglementation sur la mise en place d'une tiquette de consommation nergtique des micro-ordinateurs pour la Chine . Par consquent, la consommation nergtique relle de ce micro-ordinateur spcifique peut ne pas tre la mme que celle des donnes de consommation nergtique typique prsentes sur ltiquette. 3. Catgorie de produit La catgorie de produit est dtermine par la norme selon la configuration du micro-ordinateur. La classification des produits est conforme aux rglementations dans le tableau suivant :

Type de produit Catgorie A Catgorie B Catgorie C Description de la configuration Micro-ordinateur de bureau, tout-en-un Ordinateur portable Micro-ordinateur de bureau et tout-en-un dont la configuration est en dehors du champ d'application de la catgorie B, C et D Ordinateur portable dont la configuration est en dehors du champ d'application de la catgorie B et C 2 curs physiques de processeurs et au moins 2 Go de mmoire systme Processeur graphique distinct Plus de 2 curs physiques de processeurs avec au moins l'une des fonctions suivantes :

Au moins 2 Go de mmoire systme Processeur graphique distinct Le produit possde au moins 2 curs physiques de processeurs et 2 Go de mmoire systme. Processeur graphique distinct avec une largeur de tampon de trame d'au moins 128 bits. 1. 2. 1. 2. Catgorie D Au moins 4 curs physiques de processeurs avec au moins l'une des fonctions suivantes :

Au moins 4 Go de mmoire systme Processeur graphique distinct avec une largeur de tampon de trame d'au moins 128 bits Pour plus de dtails sur la spcification, veuillez vous reporter la norme GB28380-2012. 30 Chapitre 3 Avis des agences environnementales tiquette de consommation nergtique des ordinateurs pour la Chine 31 Restrictions dutilisation de substances dangereuses (RoHS) pour les ordinateurs portables et les tablettes en Chine Tableau des substances/composants dangereux et leur contenu Comme requis par les Mthodes pour la gestion des substances dangereuses utilisation restreinte dans les produits lectriques et lectroniques de Chine Nom de la pice Plomb

(Pb) Mercure Cadmium hexavalent Diphnyles

(Hg)

(Cd)

(Cr(VI)) polybroms (PBB) thers diphnyles polybroms (PBDE) Matires dangereuses Chrome Batterie Cbles Camra Disque dur Casque I/O PCAs Clavier cran LCD Chssis/Autre Lecteur de carte mmoire flash Lecteur de disquette Support (CD/DVD/

disquette) Mmoire Carte mre, processeur, dissipateurs thermiques Souris Unit de disque optique Priphrique d'amarrage en option Adaptateur d'alimentation Bloc d'alimentation Source d'alimentation Tlcommande Lecteur de carte Smart Card/Java X X X X X X X X X X X O X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 32 Chapitre 3 Avis des agences environnementales Matires dangereuses Chrome Plomb

(Pb) Mercure Cadmium hexavalent Diphnyles

(Hg)

(Cd)

(Cr(VI)) polybroms (PBB) thers diphnyles polybroms (PBDE) Ce formulaire a t a prpar conformment aux dispositions de la norme SJ/T 11364. O : Indique que la quantit de la substance dangereuse mentionne respecte les limites dfinies GB/T 26572 dans tous les matriaux homognes du composant. X : Indique que la quantit de la substance dangereuse mentionne dpasse les limites requises par GB/T 26572 dans au moins un matriau homogne du composant. Tous les lments du tableau accompagns d'un X sont conformes la norme RoHS de l'Union europenne. REMARQUE :

d'utilisation du produit, telles que la temprature et l'humidit. La dure d'utilisation cologique en anne, en rfrence, a t dtermine sur la base de conditions normales

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

(Cr(VI)) Nom de la pice Haut-parleurs externes Tuner TV Unit mmoire flash USB Concentrateur USB Webcam Rcepteur sans fil Cartes sans fil

I/O PCA

(LCD) X X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 33

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE) CD/DVD/

() USB USB

/Java O X X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O

(Cr(VI)) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 O O O O O O O O O O O O O O O O O O O Restrictions d'utilisation de substances dangereuses pour la Chine (ROHS) pour les ordinateurs de bureau, clients lgers, stations de travail personnelles, tout-en-un et les terminaux de point de vente Tableau des substances/composants dangereux et leur contenu Comme requis par les Mthodes pour la gestion des substances dangereuses utilisation restreinte dans les produits lectriques et lectroniques de Chine 34 Chapitre 3 Avis des agences environnementales Matires dangereuses Chrome Plomb

(Pb) Mercure Cadmium hexavalent Diphnyles

(Hg)

(Cd)

(Cr(VI)) polybroms (PBB) thers diphnyles polybroms (PBDE) Nom de la pice Batterie Cbles Camra Chssis/Autre Ventilateur Lecteur de carte mmoire flash Lecteur de disquette Dissipateur thermique Disque dur Casque I/O PCAs Clavier cran LCD Support (CD/DVD/

disquette) Mmoire Carte mre, processeur, dissipateurs thermiques Souris Unit de disque optique Priphrique d'amarrage en option Adaptateur d'alimentation Source d'alimentation Projecteur Tlcommande Lecteur de carte Smart Card/Java Disques SSD Haut-parleurs externes Stylet Tapis tactile X X X X X X X X X X X X X O X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Restrictions d'utilisation de substances dangereuses pour la Chine (ROHS) pour les ordinateurs de bureau, clients lgers, stations de travail personnelles, tout-en-un et les terminaux de point de vente 35 Matires dangereuses Chrome Plomb

(Pb) Mercure Cadmium hexavalent Diphnyles

(Hg)

(Cd)

(Cr(VI)) polybroms (PBB) thers diphnyles polybroms (PBDE) Nom de la pice Tuner TV Unit mmoire flash USB Concentrateur USB Webcam Rcepteur sans fil Cartes sans fil Plateau de capture 3D/

plaque tournante

X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Ce formulaire a t a prpar conformment aux dispositions de SJ/T 11364. O : Indique que la quantit de la substance dangereuse mentionne respecte les limites requises par GB/T 26572 dans tous les matriaux homognes du composant. X : Indique que la quantit de la substance dangereuse mentionne dpasse les limites requises par GB/T 26572 dans au moins un matriau homogne du composant. Tous les lments du tableau accompagns d'un X sont conformes la norme RoHS de l'Union europenne. REMARQUE :

d'utilisation du produit, telles que la temprature et l'humidit. La dure d'utilisation cologique en anne, en rfrence, a t dtermine sur la base de conditions normales

(ROHS)

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

(Cr(VI)) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 36 Chapitre 3 Avis des agences environnementales

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

(Cr(VI)) I/O PCA

(LCD) CD/DVD/

/Java

() USB USB 3D /

X X X X O X X X X X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 O O O O O O O O O O O O O O O O O O O O O O O O O O

(ROHS) 37

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Unit Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent chromium (Cr+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Cables

Chassis/Other

I/O PCAs

(LCD) Liquid crystal display (LCD) panel Memory Motherboard, processor, heat sinks Power pack Power supply Storage Devices Wireless Devices 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption. 38 Chapitre 3 Avis des agences environnementales http://www.hp.com/support To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides.

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Lead Mercury Cadmium

(Pb)

(Hg)

(Cd) Hexavalent chromium (Cr

+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Unit Cables

/ Chassis/Other

I/O PCAs

(LCD) AIOLiquid crystal display (LCD) panel

(for AIO only) Memory Motherboard, processor, heat sinks Power supply Storage Devices 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption. http://www.hp.com/support

(RoHS) 39 To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. Avis sur la restriction des substances dangereuses pour l'Inde

(RoHS) Ce produit, ainsi que ses consommables et pices, est conforme aux dispositions de la loi India E-waste Rule 2016 relatives la rduction des substances dangereuses. Il ne contient pas de concentrations de plomb, de mercure, de chrome hexavalent, de diphnyles polybroms ou de polybromodiphnylthers dpassant 0,1 %

du poids et 0,01 % du poids pour le cadmium, except dans les cas o les exemptions tablies l'annexe 2 de cette loi le permettent. Informations sur le rglement 1275/2008 de la Commission europenne Pour localiser les donnes sur la consommation lectrique des produits, y compris lorsque le produit est en mode veille en rseau et que tous les ports rseau cbls et les appareils sans fil sont connects, reportez-

vous la section P14 Informations supplmentaires des dclarations IT ECO l'adresse http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html. Le cas chant, activez et dsactivez le rseau sans fil en suivant les instructions incluses dans le manuel de l'utilisateur du produit ou du systme d'exploitation. Des informations sont galement disponibles l'adresse http://www.hp.com/support. Dclarations IT ECO Ordinateur portable ou tablette http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/iteconotebook-o.html Ordinateurs de bureau et clients lgers http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?

jumpid=reg_R1002_USEN Stations de travail http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html Avis sur la restriction des substances dangereuses pour le Japon

(RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. 40 Chapitre 3 Avis des agences environnementales Ley para el Aprovechamiento Sustentable de la Energa de Mxico Ley para el Aprovechamiento Sustentable de la Energa de Mxico Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energa de Mxico, que requiere la divulgacin del consumo de energa del modo de uso normal (modo inactivo) y del modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energa del modo inactivo de su configuracin especfica puede diferir de la informacin de la etiqueta. El consumo real de energa de su producto puede ser mayor o menor que el valor informado en la etiqueta de energa de producto para Mxico a causa de factores como la configuracin (componentes y mdulos seleccionados) y el uso (tareas que se estn efectuando, software instalado y en ejecucin, etc.). REMARQUE : Esta ley no es aplicable a las estaciones de trabajo. Rglementation WEEE de la Turquie Trkiye Cumhuriyeti: AEEE Ynetmeliine Uygundur Ley para el Aprovechamiento Sustentable de la Energa de Mxico 41 Certifi TCO Cette section s'applique uniquement aux produits portant le logo TCO Certified. 42 Chapitre 3 Avis des agences environnementales TCO Certified Edge Cette section s'applique uniquement aux produits portant le logo TCO Certified Edge. TCO Certified Edge 43 Index 38, 39 A avis pour la Thalande 8 batterie 9, 10, 18, 26 Brsil 3, 20 Canada 3 cordon d'alimentation pour le Japon 22 Cordons d'alimentation 22 Core du Sud 8 dplacements 23 Environnement 26 ergonomie 5, 6 Japon 7 Macrovision Corporation 15 matriau compos de perchlorate 29 Symboles/Nombres utilisation en vol 9 ventilateur 19 avis sur le niveau du volume du casque et des couteurs 19 38, 39 Commission) 2 avis sur les cordons d'alimentation avis, ordinateurs portables avis sur les appareils sans fil pour FCC (Federal Communications Singapour 8 Avis sur les priphriques sans fil avis, restriction d'utilisation de avis, restriction d'utilisation de pour le Japon 22 substances dangereuses pour la Chine 32, 34 substances dangereuses pour le Japon 40 avis de certification GS 5, 6 avis de mise la terre de cble 25 Avis de rglementation pour la Avis sur les cordons d'alimentation pour le Japon 22 avis sur les dplacements 23 avis sur les modems 11 Canada 14 Japon 14 Nouvelle-Zlande 15 Systme amricain 11, 13 Bilorussie 3 avis sur les modems pour le avis de restriction d'utilisation de Canada 14 substances dangereuses pour l'Inde 40 avis pour la Core du Sud 8 avis pour le Brsil 3, 20 avis pour le Canada 3 avis pour le Japon 7 avis pour Macrovision Corporation 15 Mexique 7 mise au rebut des quipements avis pour Tawan 9 avis relatif aux appareils sans fil pour 26 modem 11 niveau du volume du casque et des couteurs 19 Rglementation pour la Bilorussie 3 restriction d'utilisation de substances dangereuses pour l'Inde 40 restriction d'utilisation de substances dangereuses pour la Chine 32, 34 le Mexique 7 avis sur l'altitude 24 Avis sur l'environnement 26 Avis sur l'environnement pour la Chine 29 avis sur l'ergonomie 5, 6 avis sur la mise au rebut batterie 26 batterie, remplacement par l'utilisateur 9 batterie scelle en usine 10 quipement 26 restriction d'utilisation de avis sur la mise au rebut des substances dangereuses pour le Japon 40 scurit des lasers 10, 19 Singapour 8 Tawan 9 quipements 26 avis sur la scurit des lasers 10, 19 avis sur le cordon d'alimentation 22 avis sur le niveau du volume, casque et couteurs 19 avis sur les modems pour le Japon 14 avis sur les modems pour les tats-

Unis 11, 13 Avis sur les priphriques sans fil pour la Thalande 8 avis sur les utilisations en vol 9 avis sur le ventilateur 19 avis sur une utilisation dans des conditions tropicales 24 B bandes de frquences radio 5 batterie 18 batterie, avis 9, 10, 26 C Carte TV, avis de mise la terre de cble 25 Certification ENERGY STAR 27 certification TCO Certified 42 certification TCO Certified Edge 43 D dclaration sur les modems pour la Nouvelle-Zlande 15 44 Index E tiquette de consommation nergtique des ordinateurs pour la Chine 29 tiquettes, conformit 1 F FCC (Federal Communications Commission) avis sur les ordinateurs portables 2 cbles pour ordinateurs portables 2 modifications apportes aux ordinateurs portables 2 M matriel lectronique et de la batterie, recyclage 26 N niveaux de puissance maximale 5 O ordinateurs portables, modifications FCC (Federal Communications Commission) 2 P priphriques LAN sans fil 3 prise en charge vocale 15 R recyclage de la batterie 26 recyclage du matriel lectronique et de la batterie 26 Rglement 1275/2008 de la Commission europenne 40 Index 45