companies    

FCC ID: B94-AX201D2WR Intel Wireless -AX201

by: HP Inc. latest update: 2019-07-17 model: AX201D2WR

Seven grants have been issued under this FCC ID from 07/10/2019 to 07/17/2019 (this is one of one hundred and ninety-eight releases in 2019 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked password defaults, warrantee terms, troubleshooting guides, instructions, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manuals photo
app s submitted / available
1 2 3 4 5 6 7 User Manual Users Manual pdf 1.61 MiB July 17 2019 / January 13 2020 delayed release
1 2 3 4 5 6 7 User Manual Regulatory Users Manual pdf 1.57 MiB July 17 2019 / January 13 2020 delayed release
1 2 3 4 5 6 7
External Photos pdf July 05 2019 / January 02 2020
1 2 3 4 5 6 7
Cover Letter(s) pdf July 17 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf July 17 2019
1 2 3 4 5 6 7 Descritpion Antenna Inpaq Operational Description pdf July 17 2019 confidential
1 2 3 4 5 6 7
ID Label/Location Info pdf July 17 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf July 17 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf July 17 2019
1 2 3 4 5 6 7
RF Exposure Info pdf July 17 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf July 17 2019
1 2 3 4 5 6 7 Test Setup Photos SAR Test Setup Photos pdf July 17 2019 / January 13 2020 delayed release
1 2 3 4 5 6 7 Theory of Operation Operational Description pdf July 17 2019 confidential
1 2 3 4 5 6 7 Theory of Operation Description Operational Description pdf July 17 2019 confidential
1 2 3 4 5 6 7
Cover Letter(s) pdf July 17 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf May 07 2019 / October 07 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf May 07 2019 / October 07 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf May 07 2019 / October 07 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf May 07 2019 / October 07 2019
1 2 3 4 5 6 7
ID Label/Location Info pdf May 07 2019 / October 07 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf May 07 2019 / October 07 2019
1 2 3 4 5 6 7 User Manual Users Manual pdf 1.61 MiB July 17 2019 / January 13 2020 delayed release
1 2 3 4 5 6 7 User Manual Regulatory Users Manual pdf 1.57 MiB July 17 2019 / January 13 2020 delayed release

frequency equipment class purpose
1 2019-07-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
2 2422 ~ 2462 DTS - Digital Transmission System
3 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
4 2019-07-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018
5 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2422 ~ 2462 DTS - Digital Transmission System
7 JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 Effective 2019-07-17
1 2 3 4 5 6 7 2019-07-10
1 2 3 4 5 6 7 Applicant's complete, legal business name HP Inc.
1 2 3 4 5 6 7 FCC Registration Number (FRN) 0025126541
1 2 3 4 5 6 7 Physical Address 3390 East Harmony Road
1 2 3 4 5 6 7 Fort Collins, Colorado 80528
1 2 3 4 5 6 7 United States
app s TCB Information
1 2 3 4 5 6 7 TCB Application Email Address h******@acbcert.com
1 2 3 4 5 6 7 c******@telefication.com
1 2 3 4 5 6 7 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6 7 A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
1 2 3 4 5 6 7 Grantee Code B94
1 2 3 4 5 6 7 Equipment Product Code AX201D2WR
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 Name R******** P****** T******
1 2 3 4 5 6 7 Title US Canada Technical Regulations
1 2 3 4 5 6 7 Telephone Number 970-8********
1 2 3 4 5 6 7 Fax Number 000-0********
1 2 3 4 5 6 7 E-mail r******@hp.com
app s Technical Contact
1 2 3 4 5 6 7 Firm Name RF Exposure Lab
1 2 3 4 5 6 7 RF Exposure
1 2 3 4 5 6 7 SGS Taiwan Ltd
1 2 3 4 5 6 7 Name J******** M******
1 2 3 4 5 6 7 J****** C****
1 2 3 4 5 6 7 Physical Address 802 N. Twin Oaks Valley Road, Suite 105
1 2 3 4 5 6 7 134, Wu Kung Road, WuKu Industrial Zone
1 2 3 4 5 6 7 San Marcos, California 92069
1 2 3 4 5 6 7 United States
1 2 3 4 5 6 7 Taiwan
1 2 3 4 5 6 7 Telephone Number 76047********
1 2 3 4 5 6 7 +7604********
1 2 3 4 5 6 7 886 2********
1 2 3 4 5 6 7 Fax Number 886 2********
1 2 3 4 5 6 7 E-mail i******@rfexposurelab.com
1 2 3 4 5 6 7 J******@sgs.com
app s Non Technical Contact
1 2 3 4 5 6 7 Firm Name SGS Taiwan Ltd
1 2 3 4 5 6 7 Name J****** C******
1 2 3 4 5 6 7 Physical Address 134, Wu Kung Road, WuKu Industrial Zone
1 2 3 4 5 6 7 Taiwan
1 2 3 4 5 6 7 Telephone Number 886 2********
1 2 3 4 5 6 7 Fax Number 886 2********
1 2 3 4 5 6 7 E-mail J******@sgs.com
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 No
1 2 3 4 5 6 7 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)01/13/2020
1 2 3 4 5 6 7 01/02/2020
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 DTS - Digital Transmission System
1 2 3 4 5 6 7 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6 7 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wireless -AX201
1 2 3 4 5 6 7 Intel WiFi 6 AX201
1 2 3 4 5 6 7 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
1 2 3 4 5 6 7 No
1 2 3 4 5 6 7 Modular Equipment TypeSingle Modular Approval
1 2 3 4 5 6 7 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 3 4 5 6 7 Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018
1 2 3 4 5 6 7 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 Grant CommentsPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.58W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - TPN-Q225, with antenna Inpaq part no WA-P-LBLB-02-080 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.04W/kg and 1.58W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - TPN-Q225, with antenna Inpaq part no WA-P-LBLB-02-080 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg and 1.58W/kg respectively. This change is to request approval for portable category specific host notebook PC, HP model number - TPN-Q225, with antenna Inpaq part no WA-P-LBLB-02-080 (Tx1 and Tx2). Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 Firm Name Intel Corporation S.A.S.
1 2 3 4 5 6 7 Name N******** A******
1 2 3 4 5 6 7 Telephone Number 00334********
1 2 3 4 5 6 7 Fax Number 00334********
1 2 3 4 5 6 7 E-mail n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.007
2 2 15C CC MO 2412 2472 0.955
2 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.145
3 2 15E 38 CC MO 5190 5230 0.13
3 3 15E 38 CC MO 5210 5210 0.095
3 4 15E 38 CC MO 5250 5250 0.084
3 5 15E 38 CC MO ND 5260 5320 0.145
3 6 15E 38 CC MO ND 5270 5310 0.124
3 7 15E 38 CC MO ND 5290 5290 0.086
3 8 15E 38 CC MO ND 5500 5700 0.141
3 9 15E 38 CC MO ND 5510 5670 0.138
3 1 15E 38 CC MO ND 5530 5690 0.15
3 11 15E 38 CC MO ND 5710 5710 0.149
3 12 15E 38 CC MO ND 5720 5720 0.105
3 13 15E 38 CC MO 5745 5825 0.139
3 14 15E 38 CC MO 5755 5795 0.135
3 15 15E 38 CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.145
5 2 15E CC MO 5190 5230 0.13
5 3 15E CC MO 5210 5210 0.095
5 4 15E CC MO 5250 5250 0.084
5 5 15E CC MO ND 5260 5320 0.145
5 6 15E CC MO ND 5270 5310 0.124
5 7 15E CC MO ND 5290 5290 0.086
5 8 15E CC MO ND 5500 5700 0.141
5 9 15E CC MO ND 5510 5670 0.138
5 1 15E CC MO ND 5530 5690 0.15
5 11 15E CC MO ND 5710 5710 0.149
5 12 15E CC MO ND 5720 5720 0.105
5 13 15E CC MO 5745 5825 0.139
5 14 15E CC MO 5755 5795 0.135
5 15 15E CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.007
6 2 15C CC MO 2412 2472 0.955
6 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15B CC

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

potentially related items: B94HHF606 User manual Final Review B94-9560D2WZ User Manual B94HHI14CN USERS MANUAL

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC