FCC ID: B94HNC11CPD Model HSN-C11C

User Guide Product notice Software terms This user guide describes features that are common to most models. Some features may not be available on your computer. Not all features are available in all editions or versions of Windows. Systems may require upgraded and/or separately purchased hardware, drivers, software or BIOS update to take full advantage of Windows functionality. Windows 10 is automatically updated, which is always enabled. ISP fees may apply and additional requirements may apply over time for updates. See http://www.microsoft.com. To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a full refund subject to the refund policy of your seller. For any further information or to request a full refund of the price of the computer, please contact your seller. Copyright 2018 HP Development Company, L.P. AMD is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Intel, Celeron, and Pentium are trademarks of Intel Corporation in the U.S. and other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: August 2018 Document Part Number: L11079-001 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950-1). iii iv Safety warning notice Processor configuration setting (select products only) IMPORTANT: Select computer products are configured with an Intel Pentium N35xx/N37xx series or a Celeron N28xx/N29xx/N30xx/N31xx series processor and a Windows operating system. If your computer is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory reset to restore the original settings. v vi Processor configuration setting (select products only) Table of contents 1 Welcome ....................................................................................................................................................... 1 Finding information ............................................................................................................................................... 2 2 Components .................................................................................................................................................. 3 Locating hardware ................................................................................................................................................. 3 Locating software .................................................................................................................................................. 3 Labels ..................................................................................................................................................................... 4 3 Network connections ..................................................................................................................................... 6 Connecting to a wireless network ......................................................................................................................... 6 Using the wireless controls ................................................................................................................. 6 Wireless button ................................................................................................................. 6 Operating system controls ............................................................................................... 6 Connecting to a WLAN ......................................................................................................................... 7 Using HP Mobile Broadband (select products only) ............................................................................ 7 Using GPS (select products only) ........................................................................................................ 8 Using Bluetooth wireless devices (select products only) ................................................................... 8 Connecting Bluetooth devices .......................................................................................... 8 Using NFC to share information (select products only) ...................................................................... 8 Sharing .............................................................................................................................. 9 Connecting to a wired network .............................................................................................................................. 9 Connecting to a local area network (LAN) (select products only) ....................................................... 9 Using HP LAN-Wireless Protection (select products only) ................................................................ 10 Turning on and customizing HP LAN-Wireless Protection ............................................. 10 Using HP MAC Address Pass Through to identify your computer on a network (select products only) ............. 11 Customizing MAC Address Pass Through .......................................................................................... 11 4 Navigating the screen .................................................................................................................................. 12 Using TouchPad and touch screen gestures ........................................................................................................ 12 Tap ..................................................................................................................................................... 12 Two-finger pinch zoom ..................................................................................................................... 13 Two-finger slide (TouchPad only) ..................................................................................................... 13 Two-finger tap (TouchPad only) ........................................................................................................ 13 Four-finger tap (TouchPad only) ....................................................................................................... 13 Three-finger swipe (TouchPad only) ................................................................................................. 14 One-finger slide (touch screen only) ................................................................................................. 15 vii Using an optional keyboard or mouse ................................................................................................................. 15 Using an on-screen keyboard (select products only) .......................................................................................... 15 5 Entertainment features ............................................................................................................................... 16 Using a camera (select products only) ................................................................................................................ 16 Using audio .......................................................................................................................................................... 16 Connecting speakers ......................................................................................................................... 16 Connecting headphones .................................................................................................................... 16 Connecting a microphone ................................................................................................................. 16 Connecting headsets ......................................................................................................................... 17 Using sound settings ......................................................................................................................... 17 Using video .......................................................................................................................................................... 17 Connecting a DisplayPort device using a USB Type-C cable (select products only) ......................... 17 Connecting a Thunderbolt device using a USB Type-C cable (select products only) ....................... 18 Connecting video devices by using a VGA cable (select products only) ........................................... 19 Connecting video devices using an HDMI cable (select products only) ............................................ 20 Setting up HDMI audio .................................................................................................... 21 Connecting a Thunderbolt DisplayPort device ................................................................................. 21 Discovering and connecting wired displays using MultiStream Transport ...................................... 22 Connect displays to computers with AMD or Nvidia graphics (with an optional hub) ... 22 Connect displays to computers with Intel graphics (with an optional hub) ................... 23 Connect displays to computers with Intel graphics (with a built-in hub) ...................... 23 Discovering and connecting to Miracast-compatible wireless displays (select products only) ...... 24 Discovering and connecting to Intel WiDi certified displays (select Intel products only) ................ 24 Using data transfer .............................................................................................................................................. 24 Connecting devices to a USB Type-C port (select products only) ..................................................... 24 6 Managing power .......................................................................................................................................... 26 Using Sleep and Hibernation ............................................................................................................................... 26 Initiating and exiting Sleep ............................................................................................................... 26 Initiating and exiting Hibernation (select products only) ................................................................. 27 Shutting down (turning off) the computer .......................................................................................................... 27 Using the Power icon and Power Options ............................................................................................................ 28 Running on battery power ................................................................................................................................... 28 Using HP Fast Charge (select products only) .................................................................................... 28 Displaying battery charge ................................................................................................................. 29 Finding battery information in HP Support Assistant (select products only) .................................. 29 Conserving battery power ................................................................................................................. 29 Identifying low battery levels ........................................................................................................... 29 Resolving a low battery level ............................................................................................................ 30 Resolving a low battery level when external power is available ................................... 30 viii Resolving a low battery level when no power source is available ................................. 30 Resolving a low battery level when the computer cannot exit Hibernation .................. 30 7 Security ...................................................................................................................................................... 31 Protecting the computer ..................................................................................................................................... 31 Using passwords .................................................................................................................................................. 31 Setting passwords in Windows ......................................................................................................... 32 Setting passwords in Computer Setup ............................................................................................. 33 Managing a BIOS administrator password ........................................................................................ 33 Entering a BIOS administrator password ....................................................................... 34 Using DriveLock Security Options ..................................................................................................... 35 Selecting Automatic DriveLock (select products only) ................................................... 35 Enabling Automatic DriveLock ..................................................................... 35 Disabling Automatic DriveLock .................................................................... 35 Entering an Automatic DriveLock password ................................................ 36 Selecting manual DriveLock ........................................................................................... 36 Setting a DriveLock master password ......................................................... 37 Enabling DriveLock and setting a DriveLock user password ......................................... 37 Disabling DriveLock ........................................................................................................ 38 Entering a DriveLock password ...................................................................................... 38 Changing a DriveLock password ..................................................................................... 38 Windows Hello (select products only) ................................................................................................................. 39 Using antivirus software ...................................................................................................................................... 39 Using firewall software ........................................................................................................................................ 39 Installing software updates ................................................................................................................................. 40 Using HP Client Security (select products only) .................................................................................................. 40 Using HP Device as a Service (HP DaaS) (select products only) .......................................................................... 40 Using an optional security cable (select products only) ..................................................................................... 40 Using a fingerprint reader (select products only) ............................................................................................... 41 Locating the fingerprint reader ......................................................................................................... 41 8 Maintenance ............................................................................................................................................... 42 Improving performance ....................................................................................................................................... 42 Using Disk Defragmenter .................................................................................................................. 42 Using Disk Cleanup ............................................................................................................................ 42 Using HP 3D DriveGuard (select products only) ................................................................................ 43 Identifying HP 3D DriveGuard status .............................................................................. 43 Updating programs and drivers .......................................................................................................................... 43 Cleaning your computer ...................................................................................................................................... 43 Cleaning procedures .......................................................................................................................... 44 Cleaning the display ........................................................................................................ 44 ix Cleaning the sides or cover ............................................................................................. 44 Cleaning the TouchPad, keyboard, or mouse (select products only) ............................. 44 Traveling with or shipping your computer .......................................................................................................... 44 9 Backing up, restoring, and recovering ........................................................................................................... 46 Using Windows tools ........................................................................................................................................... 46 Creating HP Recovery media (select products only) ........................................................................................... 46 Using HP Recovery Manager to create recovery media .................................................................... 47 Before you begin ............................................................................................................. 47 Creating the recovery media ........................................................................................... 47 Using the HP Cloud Recovery Download Tool to create recovery media .......................................... 48 Restoring and recovery ........................................................................................................................................ 48 Restoring, resetting, and refreshing using Windows tools .............................................................. 48 Restoring using HP Recovery Manager and the HP Recovery partition ........................................... 48 Recovering using HP Recovery Manager ........................................................................................... 48 Recovering using the HP Recovery partition (select products only) ................................................ 49 Recovering using HP Recovery media ............................................................................................... 49 Changing the computer boot order ................................................................................................... 50 Removing the HP Recovery partition (select products only) ............................................................ 50 10 Computer Setup (BIOS), TPM, and HP Sure Start ............................................................................................ 51 Using Computer Setup ......................................................................................................................................... 51 Starting Computer Setup .................................................................................................................. 51 Navigating and selecting in Computer Setup ................................................................................... 51 Restoring factory settings in Computer Setup ................................................................................. 51 Updating the BIOS ............................................................................................................................. 52 Determining the BIOS version ......................................................................................... 52 Downloading a BIOS update ........................................................................................... 52 Changing the boot order using the f9 prompt .................................................................................. 53 TPM BIOS settings (select products only) ........................................................................................................... 53 Using HP Sure Start (select products only) ......................................................................................................... 54 11 Using HP PC Hardware Diagnostics .............................................................................................................. 55 Using HP PC Hardware Diagnostics Windows (select products only) ................................................................. 55 Downloading HP PC Hardware Diagnostics Windows ....................................................................... 55 Downloading the latest HP PC Hardware Diagnostics Windows version ....................... 56 Downloading HP Hardware Diagnostics Windows by product name or number

(select products only) ..................................................................................................... 56 Installing HP PC Hardware Diagnostics Windows ............................................................................. 56 Using HP PC Hardware Diagnostics UEFI ............................................................................................................. 56 x Starting HP PC Hardware Diagnostics UEFI ....................................................................................... 57 Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive .............................................. 57 Downloading the latest HP PC Hardware Diagnostics UEFI version .............................. 57 Downloading HP PC Hardware Diagnostics UEFI by product name or number

(select products only) ..................................................................................................... 57 Using Remote HP PC Hardware Diagnostics UEFI settings (select products only) ............................................. 58 Downloading Remote HP PC Hardware Diagnostics UEFI ................................................................. 58 Downloading the latest Remote HP PC Hardware Diagnostics UEFI version ................. 58 Downloading Remote HP PC Hardware Diagnostics UEFI by product name or number ............................................................................................................................ 58 Customizing Remote HP PC Hardware Diagnostics UEFI settings .................................................... 58 12 Specifications ............................................................................................................................................ 60 Input power .......................................................................................................................................................... 60 Operating environment ....................................................................................................................................... 61 13 Electrostatic Discharge .............................................................................................................................. 62 14 Accessibility .............................................................................................................................................. 63 Accessibility ......................................................................................................................................................... 63 Finding the technology tools you need ............................................................................................ 63 Our commitment ............................................................................................................................... 63 International Association of Accessibility Professionals (IAAP) ....................................................... 63 Finding the best assistive technology .............................................................................................. 64 Assessing your needs ..................................................................................................... 64 Accessibility for HP products .......................................................................................... 64 Standards and legislation .................................................................................................................................... 65 Standards .......................................................................................................................................... 65 Mandate 376 EN 301 549 ............................................................................................ 65 Web Content Accessibility Guidelines (WCAG) ................................................................ 65 Legislation and regulations .............................................................................................................. 65 United States ................................................................................................................... 66 21st Century Communications and Video Accessibility Act (CVAA) ............................... 66 Canada ............................................................................................................................. 66 Europe ............................................................................................................................. 67 United Kingdom .............................................................................................................. 67 Australia .......................................................................................................................... 67 Worldwide ....................................................................................................................... 67 Useful accessibility resources and links .............................................................................................................. 68 Organizations .................................................................................................................................... 68 Educational institutions .................................................................................................................... 68 xi Other disability resources ................................................................................................................. 68 HP links .............................................................................................................................................. 68 Contacting support .............................................................................................................................................. 69 xii 1 Welcome After you set up and register the computer, we recommend the following steps to get the most out of your smart investment:

TIP: To quickly return to the computer Start screen from an open app or the Windows desktop, press the Windows key previous screen. on your keyboard. Pressing the Windows key again will return you to the Connect to the InternetSet up your wired or wireless network so that you can connect to the Internet. For more information, see Network connections on page 6. Update your antivirus softwareProtect your computer from damage caused by viruses. The software is preinstalled on the computer. For more information, see Using antivirus software on page 39. Get to know your computerLearn about your computer features. See Components on page 3 and Navigating the screen on page 12 for additional information. Find installed softwareAccess a list of the software preinstalled on the computer:

Select the Start button. or Right-click the Start button, and then select Apps and Features. Back up your hard drive by creating recovery discs or a recovery USB flash drive. See Backing up, restoring, and recovering on page 46. 1 Finding information To locate resources that provide product details, how-to information, and more, use this table. Contents Overview of computer setup and features Online chat with an HP technician Support telephone numbers Replacement parts videos (select products only) Maintenance and service guides HP service center locations Proper workstation setup Guidelines for posture and work habits that increase your comfort and decrease your risk of injury Electrical and mechanical safety information Important regulatory notices, including information about proper battery disposal, if needed. Specific warranty information about this computer Resource Setup Instructions HP support For HP support, go to http://www.hp.com/support, and follow the instructions to find your product. Safety & Comfort Guide To access this guide:

Select the Start button, select HP Help and Support, and then select HP Documentation. or Go to http://www.hp.com/ergo. IMPORTANT: You must be connected to the Internet to access the latest version of the user guide. Regulatory, Safety and Environmental Notices To access this document:

Select the Start button, select HP Help and Support, and then select HP Documentation. Limited Warranty*

To access this document:

Select the Start button, select HP Help and Support, and then select HP Documentation. or Go to http://www.hp.com/go/orderdocuments. IMPORTANT: You must be connected to the Internet to access the latest version of the user guide.

*You can find your HP Limited Warranty located with the user guides on your product and/or on the CD or DVD provided in the box. In some countries or regions, HP may provide a printed warranty in the box. For countries or regions where the warranty is not provided in printed format, you can request a copy from http://www.hp.com/go/orderdocuments. For products purchased in Asia Pacific, you can write to HP at POD, PO Box 161, Kitchener Road Post Office, Singapore 912006. Include your product name, and your name, phone number, and postal address. 2 Chapter 1 Welcome 2 Components Locating hardware To find out what hardware is installed on your computer:

Type device manager in the taskbar search box, and then select the Device Manager app. A list displays all the devices installed on your computer. For information about system hardware components and the system BIOS version number, press fn+esc

(select products only). Locating software To find out what software is installed on your computer:

Select the Start button. or Right-click the Start button, and then select Apps and Features. Locating hardware 3 Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. Labels may be in paper form or imprinted on the product. IMPORTANT: Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the service door, on the back of the display, or on the bottom of a tablet kickstand. Service labelProvides important information to identify your computer. When contacting support, you may be asked for the serial number, the product number, or the model number. Locate this information before you contact support. Your service label will resemble one of the examples shown below. Refer to the illustration that most closely matches the service label on your computer. Component

(1)

(2)

(3)

(4)

(5) HP product name Model number Product ID Serial number Warranty period Component

(1)

(2) HP product name Product ID 4 Chapter 2 Components Component

(3)

(4) Serial number Warranty period Regulatory label(s)Provide(s) regulatory information about the computer. Wireless certification label(s)Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. Labels 5 3 Network connections Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your computer and a wired or wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Your computer may be equipped with one or more of the following wireless devices:

WLAN deviceConnects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your computer communicates with a wireless router or a wireless access point. HP Mobile Broadband Module (select products only)A wireless wide area network (WWAN) device that gives you wireless connectivity over a much larger area. Mobile network operators install base stations

(similar to cell phone towers) throughout large geographic areas, effectively providing coverage across entire states, regions, or even countries. Bluetooth deviceCreates a personal area network (PAN) to connect to other Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close togethertypically within 10 meters (approximately 33 feet) of each other. Using the wireless controls You can control the wireless devices in your computer using one or more of these features:

Wireless button (also called airplane mode key or wireless key) (referred to in this chapter as wireless button) Operating system controls Wireless button The computer may have a wireless button, one or more wireless devices, and one or two wireless lights. All the wireless devices on your computer are enabled at the factory. The wireless light indicates the overall power state of your wireless devices, not the status of individual devices. Operating system controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, and diagnose and repair network problems. To use operating system controls:

1. Type control panel in the taskbar search box, and then select Control Panel. Select Network and Internet, and then select Network and Sharing Center. 2. or 6 Chapter 3 Network connections On the taskbar, select the network status icon, and then select Network & Internet settings. Connecting to a WLAN NOTE: When you are setting up Internet access in your home, you must establish an account with an Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the Internet service. To connect to a WLAN, follow these steps:

1. Be sure that the WLAN device is on. 2. On the taskbar, select the network status icon, and then connect to one of the available networks. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Enter the code, and then select Next to complete the connection. NOTE:

NOTE:

1. 2. 3. If no WLANs are listed, you may be out of range of a wireless router or access point. If you do not see the WLAN you want to connect to:

On the taskbar, right-click the network status icon, and then select Open Network & Internet settings. or On the taskbar, select the network status icon, and then select Network & Internet settings. Under the Network & Internet Status section, select Network and Sharing Center. Select Set up a new connection or network. A list of options is displayed, allowing you to manually search for and connect to a network or to create a new network connection. Follow the on-screen instructions to complete the connection. 3. After the connection is made, select the network status icon at the far right of the taskbar, to verify the name and status of the connection. NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. Using HP Mobile Broadband (select products only) Your HP Mobile Broadband computer has built-in support for mobile broadband service. Your new computer, when used with a mobile operators network, gives you the freedom to connect to the Internet, send e-mail, or connect to your corporate network without the need for Wi-Fi hotspots. You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband service. The number may be printed on a label located on the bottom of your computer, inside the battery bay, under the service door, or on the back of the display. or 1. 2. 3. On the taskbar, select the network status icon. Select Network & Internet settings. Under the Network & Internet section, select Cellular, and then select Advanced Options. Connecting to a wireless network 7 Some mobile network operators require the use of a SIM card. A SIM card contains basic information about you, such as a personal identification number (PIN), as well as network information. Some computers include a SIM card that is preinstalled. If the SIM card is not preinstalled, it may be provided in the HP Mobile Broadband information provided with your computer or the mobile network operator may provide it separately from the computer. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband information included with your computer. Using GPS (select products only) Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites deliver location, speed, and direction information to GPS-equipped systems. To enable GPS, make sure location is enabled under the Windows privacy setting. 1. Type location in the taskbar search box, and then select Location privacy settings. Follow the on-screen instructions for using location settings. 2. Using Bluetooth wireless devices (select products only) Computers (desktop, notebook) Phones (cellular, cordless, smartphone) A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following:

Audio devices (headset, speakers) Imaging devices (printer, camera) External keyboard Mouse Connecting Bluetooth devices Before you can use a Bluetooth device, you must establish a Bluetooth connection. 1. Type bluetooth in the taskbar search box, and then select Bluetooth and other devices settings. Turn on Bluetooth, if it is not already turned on. Select Add Bluetooth or other device, and then in the Add a device dialog box, select Bluetooth. Select your device from the list, and then follow the on-screen instructions. 2. 3. 4. NOTE:

If the device requires verification, a pairing code is displayed. On the device you are adding, follow the on-screen instructions to verify that the code on your device matches the pairing code. For more information, refer to the documentation provided with the device. NOTE:

devices may have additional requirements; refer to the documentation provided with the device. If your device does not appear in the list, be sure that Bluetooth on that device is turned on. Some Using NFC to share information (select products only) Your computer supports Near Field Communication (NFC), which allows you to wirelessly share information between two NFC-enabled devices. Information is transferred by tapping the tapping area (antenna) of the 8 Chapter 3 Network connections computer with the antenna of your phone or other device. With NFC and supported apps, you can share websites, transfer contact information, transfer payments, and print on NFC-enabled printers. NOTE: To locate the tapping area on your computer, see Components on page 3. Sharing 1. 2. 3. Confirm that the NFC function is enabled. a. Type wireless in the taskbar search box, and then select Turn wireless devices on or off. Confirm that the selection for NFC is On. b. Tap the NFC tapping area with an NFC-enabled device. You may hear a sound when the devices connect. NOTE: To find the location of the antenna on the other NFC device, refer to your device instructions. Follow any on-screen instructions to continue. Connecting to a wired network Select products may allow wired connections: local area network (LAN) and modem connection. A LAN connection uses a network cable and is much faster than a modem, which uses a telephone cable. Both cables are sold separately. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem cable or telephone cable into an RJ-45 (network) jack. Connecting to a local area network (LAN) (select products only) Use a LAN connection if you want to connect the computer directly to a router in your home (instead of working wirelessly), or if you want to connect to an existing network at your office. NOTE: A feature called HP LAN-Wireless Protection may be enabled on your computer. It closes your wireless (Wi-Fi) or WWAN connection when you connect directly to a LAN. For more information about HP LAN-

Wireless Protection, see Using HP LAN-Wireless Protection (select products only) on page 10. If there is no RJ-45 port on the computer, connecting to a LAN requires an 8-pin, RJ-45 network cable or an optional docking device or expansion product. To connect the network cable, follow these steps:

1. Plug the network cable into the network jack (1) on the computer or on an optional docking device or expansion product. Connecting to a wired network 9 2. Plug the other end of the network cable into a network wall jack (2) or router. If the network cable contains noise suppression circuitry (3), which prevents interference from NOTE:

TV and radio reception, orient the circuitry end of the cable toward the computer. Using HP LAN-Wireless Protection (select products only) In a LAN environment, you can set HP LAN-Wireless Protection to safeguard your LAN network from unauthorized wireless access. When HP LAN-Wireless Protection is enabled, the WLAN (Wi-Fi) or WWAN connection is turned off when the computer is connected directly to a LAN. Turning on and customizing HP LAN-Wireless Protection 1. 2. 3. 4. 5. Connect a network cable to the network jack on the computer, or on an optional docking device or expansion product. Start Computer Setup (BIOS). Computers or tablets with keyboards:

Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

Turn on or restart the tablet, and then quickly hold down the volume down button until the Startup menu is displayed. Tap f10 to enter Computer Setup. Select Advanced, and then select Built-in Device Options. Select the check box for LAN/WLAN Auto Switching and/or LAN/WWAN Auto Switching to turn off WLAN and/or WWAN connections when connected to a LAN network. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. 10 Chapter 3 Network connections Using HP MAC Address Pass Through to identify your computer on a network (select products only) MAC Address Pass Through provides a customizable way of identifying your computer and its communications on networks. This system MAC address provides unique identification even when your computer is connected through an Ethernet adapter. This address is enabled by default. Customizing MAC Address Pass Through 1. 2. 3. 4. 5. Start Computer Setup (BIOS). Setup. Computers or tablets with keyboards:

Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Tablets without keyboards:

Turn on or restart the tablet, and then quickly hold down the volume down button until the Startup menu is displayed. Tap f10 to enter Computer Setup. Select Advanced, and then select MAC Address Pass Through. In the box to the right of Host Based MAC Address, select either System Address to enable MAC address Pass Through or Custom Address to customize the address. If you selected Custom, select MAC ADDRESS, enter your customized system MAC address, and then press enter to save the address. If the computer has an embedded LAN and you would like to use the embedded MAC address as the system MAC address, select Reuse Embedded LAN Address. or Select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. Using HP MAC Address Pass Through to identify your computer on a network (select products only) 11 4 Navigating the screen Use touch gestures on the TouchPad Use touch gestures directly on the computer screen You can navigate the computer screen in one or more of the following ways:

Use an optional mouse or keyboard (purchased separately) Use an on-screen keyboard Use a pointing stick Using TouchPad and touch screen gestures The TouchPad helps you navigate the computer screen and control the pointer using simple touch gestures. You can also use the left and right TouchPad buttons as you would use the corresponding buttons on an external mouse. To navigate a touch screen (select products only), touch the screen directly using gestures described in this chapter. You can also customize gestures and view demonstrations of how they work. Type control panel in the taskbar search box, select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse. NOTE: Unless noted, gestures can be used on the TouchPad or a touch screen (select products only). Tap Use the tap/double-tap gesture to select or open an item on the screen. Point to an item on the screen, and then tap one finger on the TouchPad zone or touch screen to select the item. Double-tap an item to open it. 12 Chapter 4 Navigating the screen Two-finger pinch zoom Use the two-finger pinch zoom to zoom out or in on images or text. Zoom out by placing two fingers apart on the TouchPad zone or touch screen and then moving your fingers together. Zoom in by placing two fingers together on the TouchPad zone or touch screen and then moving your fingers apart. Two-finger slide (TouchPad only) Use the two-finger slide to move up, down, or sideways on a page or image. Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or right. Two-finger tap (TouchPad only) Use the two-finger tap to open the menu for an object on the screen. NOTE: The two-finger tap performs the same function as right-clicking with the mouse. Tap two fingers on the TouchPad zone to open the options menu for the selected object. Four-finger tap (TouchPad only) Use the four-finger tap to open the action center. Using TouchPad and touch screen gestures 13 Tap four fingers on the Touchpad to open the action center and view current settings and notifications. Three-finger swipe (TouchPad only) Swipe 3 fingers away from you to see all open windows. Use the three-finger swipe to view open windows and to switch between open windows and the desktop. Swipe 3 fingers left or right to switch between open windows. Swipe 3 fingers toward you to show the desktop. 14 Chapter 4 Navigating the screen One-finger slide (touch screen only) Use the one-finger slide to pan or scroll through lists and pages, or to move an object. To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. To move an object, press and hold your finger on an object, and then drag your finger to move the object. Using an optional keyboard or mouse An optional keyboard or mouse allows you to type, select items, scroll, and perform the same functions as you do using touch gestures. The keyboard also allows you to use action keys and hot keys to perform specific functions. Using an on-screen keyboard (select products only) 1. 2. To display an on-screen keyboard, tap the keyboard icon in the notification area, at the far right of the taskbar. Begin typing. NOTE: Suggested words may be displayed above the on-screen keyboard. Tap a word to select it. NOTE: Action keys and hot keys do not display or function on the on-screen keyboard. Using an optional keyboard or mouse 15 5 Entertainment features Use your HP computer for business or pleasure to meet with others via the camera, mix audio and video, or connect external devices like a projector, monitor, TV, or speakers. See Components on page 3 to locate the audio, video and camera features on your computer. Using a camera (select products only) Your computer has a camera (integrated camera) that records video and captures photographs. Some models allow you to video conference and chat online using streaming video. To access the camera, type camera in the taskbar search box, and then select Camera from the list of applications. Using audio You can download and listen to music, stream audio content (including radio) from the web, record audio, or mix audio and video to create multimedia. You can also play music CDs on the computer (on select models) or attach an external optical drive to play CDs. To enhance your listening enjoyment, attach headphones or speakers. Connecting speakers You can attach wired speakers to your computer by connecting them to a USB port or to the audio-out

(headphone)/audio-in (microphone) combo jack on your computer or on a docking station. To connect wireless speakers to your computer, follow the device manufacturer's instructions. To connect high-definition speakers to the computer, see Setting up HDMI audio on page 21. Before connecting speakers, lower the volume setting. Connecting headphones WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this guide:

Select the Start button, select HP, and then select HP Documentation. You can connect wired headphones to the headphone jack or to the audio-out (headphone)/audio-in

(microphone) combo jack on your computer. To connect wireless headphones to your computer, follow the device manufacturer's instructions. Connecting a microphone To record audio, connect a microphone to the microphone jack on the computer. For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. 16 Chapter 5 Entertainment features Connecting headsets WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access this guide:

Select the Start button, select HP Help and Support, and then select HP Documentation. Headphones combined with a microphone are called headsets. You can connect wired headsets to the audio-

out (headphone)/audio-in (microphone) combo jack on your computer. To connect wireless headsets to your computer, follow the device manufacturer's instructions. Using sound settings Use sound settings to adjust system volume, change system sounds, or manage audio devices. To view or change sound settings:

Type control panel in the taskbar search box, select Control Panel, select Hardware and Sound, and then select Sound. Your computer may include an enhanced sound system by Bang & Olufsen, DTS, Beats audio, or another provider. As a result, your computer may include advanced audio features that can be controlled through an audio control panel specific to your audio system. Use the audio control panel to view and control audio settings. Type control panel in the taskbar search box, select Control Panel, select Hardware and Sound, and then select the audio control panel specific to your system. Using video Your computer is a powerful video device that enables you to watch streaming video from your favorite websites and download video and movies to watch on your computer when you are not connected to a network. To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external monitor, projector, or TV. IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information on using your video features, refer to HP Support Assistant. Connecting a DisplayPort device using a USB Type-C cable (select products only) NOTE: To connect a USB Type-C DisplayPort device to your computer, you need a USB Type-C cable, purchased separately. To see video or high-resolution display output on an external DisplayPort device, connect the DisplayPort device according to the following instructions:

1. Connect one end of the USB Type-C cable to the USB SuperSpeed and DisplayPort port on the computer. Using video 17 2. 3. Connect the other end of the cable to the external DisplayPort device. Press f1 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and external device. Extend: View the screen image extended across both the computer and external device. Second screen only: View the screen image on the external device only. Each time you press f1 the display state changes. NOTE:

For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. Select the Start button, select Settings, and then select System. Under Display, select the appropriate resolution, and then select Keep changes. Connecting a Thunderbolt device using a USB Type-C cable (select products only) NOTE: To connect a USB Type-C Thunderbolt device to your computer, you need a USB Type-C cable, purchased separately. To see video or high-resolution display output on an external Thunderbolt device, connect the Thunderbolt device according to the following instructions:

1. Connect one end of the USB Type-C cable to the USB Type-C Thunderbolt port on the computer. 18 Chapter 5 Entertainment features 2. 3. Connect the other end of the cable to the external Thunderbolt device. Press fn+f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and external device. Extend: View the screen image extended across both the computer and external device. Second screen only: View the screen image on the external device only. Each time you press fn+f4 the display state changes. NOTE:

For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. Select the Start button, select Settings, and then select System. Under Display, select the appropriate resolution, and then select Keep changes. Connecting video devices by using a VGA cable (select products only) NOTE: To connect a VGA video device to your computer, you need an VGA cable, purchased separately. To see the computer screen image on an external VGA monitor or projected for a presentation, connect a monitor or projector to the computer's VGA port. 1. Connect the VGA cable from the monitor or projector to the VGA port on the computer as shown. Using video 19 2. Press f4 to alternate the screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across both the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE:

For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. Select the Start button, select Settings, and then select System. Under Display, select the appropriate resolution, and then select Keep changes. Connecting video devices using an HDMI cable (select products only) NOTE: To connect an HDMI device to your computer, you need an HDMI cable, purchased separately. To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the following instructions:

1. Connect one end of the HDMI cable to the HDMI port on the computer. 20 Chapter 5 Entertainment features 2. 3. Connect the other end of the cable to the high-definition TV or monitor. Press f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and the external device. Extend: View the screen image extended across both the computer and the external device. Second screen only: View the screen image on the external device only. Each time you press f4, the display state changes. NOTE:

For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. Select the Start button, select Settings, and then select System. Under Display, select the appropriate resolution, and then select Keep changes. Setting up HDMI audio HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV to the computer, you can then turn on HDMI audio by following these steps:

1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. On the Playback tab, select the name of the digital output device. Click Set Default, and then click OK. 2. 3. To return the audio stream to the computer speakers:

1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then click Playback devices. On the Playback tab, click Speakers. Click Set Default, and then click OK. 2. 3. Connecting a Thunderbolt DisplayPort device The Thunderbolt DisplayPort connects an optional high-resolution display device or a high-performance data device. This port delivers higher performance than the VGA external monitor port and improves digital connectivity. Using video 21 Install all the latest drivers for your Thunderbolt device before connecting the device to the NOTE:

Thunderbolt DisplayPort. Thunderbolt cable and Thunderbolt device (sold separately) must be compatible with Windows. To determine whether your device is Thunderbolt Certified for Windows, go to https://thunderbolttechnology.net/products. 1. Connect one end of the Thunderbolt DisplayPort cable to the Thunderbolt DisplayPort on the computer. 2. 3. Connect the other end of the cable to the digital display device. Press f4 to alternate the computer screen image between 4 display states:

PC screen only: View the screen image on the computer only. Duplicate: View the screen image simultaneously on both the computer and external device. Extend: View the screen image extended across both the computer and external device. Second screen only: View the screen image on the external device only. Each time you press f4 the display state changes. NOTE:

For best results, especially if you choose the "Extend" option, increase the screen resolution of the external device, as follows. Select the Start button, select Settings, and then select System. Under Display, select the appropriate resolution, and then select Keep changes. Discovering and connecting wired displays using MultiStream Transport MultiStream Transport (MST) allows you to connect multiple wired display devices to your computer by connecting to the VGA or DisplayPorts on your computer and also to the VGA or DisplayPorts on a hub or an external docking station. You can connect in several ways, depending on the type of graphics controller installed on your computer and whether or not your computer includes a built-in hub. Go to Device Manager to find out what hardware is installed on your computer. Type device manager in the taskbar search box, and then select the Device Manager app. A list displays all the devices installed on your computer. Connect displays to computers with AMD or Nvidia graphics (with an optional hub) NOTE: With an AMD graphics controller and optional hub, you can connect up to 6 external display devices. NOTE: With an Nvidia graphics controller and optional hub, you can connect up to 4 external display devices. 22 Chapter 5 Entertainment features To set up multiple display devices, follow these steps:

1. 2. 3. Connect an external hub (purchased separately) to the DisplayPort on your computer, using a DP-to-DP cable (purchased separately). Be sure that the hub power adapter is connected to AC power. Connect your external display devices to the VGA ports or DisplayPorts on the hub. To see all of your connected display devices, type device manager in the taskbar search box, and then select the Device Manager app. If you don't see all of your connected displays, be sure that each is connected to the correct port on the hub. NOTE: Multiple display choices include Duplicate, which mirrors your computer screen on all enabled display devices, or Extend, which spans your computer screen across all enabled display devices. Connect displays to computers with Intel graphics (with an optional hub) NOTE: With an Intel graphics controller and optional hub, you can connect up to 3 display devices. To set up multiple display devices, follow these steps:

1. Connect an external hub (purchased separately) to the DisplayPort on your computer, using a DP-to-DP cable (purchased separately). Be sure that the hub power adapter is connected to AC power. Connect your external display devices to the VGA ports or DisplayPorts on the hub. 2. 3. When Windows detects a monitor connected to the DP hub, the DisplayPort Topology Notification dialog box is displayed. Click the appropriate options to configure your displays. Multiple display choices include Duplicate, which mirrors your computer screen on all enabled display devices, or Extend, which extends the screen image across all enabled display devices. NOTE:

If this dialog box does not appear, be sure that each external display device is connected to the correct port on the hub. Select the Start button, select Settings, and then select System. Under Display, select the appropriate resolution, and then select Keep changes. Connect displays to computers with Intel graphics (with a built-in hub) With your internal hub and Intel graphics controller, you can connect up to 3 display devices in the following configurations:

Two 1920 x 1200 DP monitors connected to the computer + one 1920 x 1200 VGA monitor connected to an optional docking station One 2560 x 1600 DP monitor connected to the computer + one 1920 x 1200 VGA monitor connected to an optional docking station To set up multiple display devices, follow these steps:

1. Connect your external display devices to the VGA ports or DisplayPorts (DP) on the computer base or the docking station. 2. When Windows detects a monitor connected to the DP hub, the DisplayPort Topology Notification dialog box is displayed. Click the appropriate options to configure your displays. Multiple display choices include Duplicate, which mirrors your computer screen on all enabled display devices, or Extend, which extends the screen image across all enabled display devices. NOTE:

If this dialog box does not appear, be sure that each external display device is connected to the correct port on the hub. Select the Start button, select Settings, and then select System. Under Display, select the appropriate resolution, and then select Keep changes. Using video 23 Discovering and connecting to Miracast-compatible wireless displays (select products only) NOTE: To learn what type of display you have (Miracast-compatible or Intel WiDi), refer to the documentation that came with your TV or secondary display. To discover and connect to Miracast-compatible wireless displays without leaving your current apps, follow the steps below. To open Miracast:

Type project in the taskbar search box, and then click Project to a second screen. Click Connect to a wireless display, and then follow the on-screen instructions. Discovering and connecting to Intel WiDi certified displays (select Intel products only) Use Intel WiDi to wirelessly project individual files such as photos, music, or videos, or to duplicate your entire computer screen to a TV or a secondary display device. Intel WiDi, a premium Miracast solution, makes it easy and seamless to pair your secondary display device;

provides for full-screen duplication; and improves speed, quality, and scaling. To connect to Intel WiDi certified displays:

Type project in the taskbar search box, and then click Project to a second screen. Click Connect to a wireless display, and then follow the on-screen instructions. To open Intel WiDi:

Type Intel WiDi in the taskbar search box, and then click Intel WiDi. Using data transfer Your computer is a powerful entertainment device that enables you to transfer photos, videos, and movies from your USB devices to view on your computer. To enhance your viewing enjoyment, use one of the USB Type-C ports on the computer to connect a USB device, such as a cell phone, camera, activity tracker, or smartwatch, and transfer the files to your computer. IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the correct cable. Follow the device manufacturer's instructions. For information on using your USB Type-C features, refer to HP Support Assistant. Connecting devices to a USB Type-C port (select products only) NOTE: To connect a USB Type-C device to your computer, you need a USB Type-C cable, purchased separately. 1. Connect one end of the USB Type-C cable to the USB Type-C port on the computer. 24 Chapter 5 Entertainment features 2. Connect the other end of the cable to the external device. Using data transfer 25 6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power and an external power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Some power management features described in this chapter may not be available on your computer. Using Sleep and Hibernation CAUTION: Several well-known vulnerabilities exist when a computer is in the Sleep state. To prevent an unauthorized user from accessing data on your computer, even encrypted data, HP recommends that you always initiate Hibernation instead of Sleep anytime the computer will be out of your physical possession. This practice is particularly important when you travel with your computer. CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a disc or an external media card. Windows has two power-saving states, Sleep and Hibernation. SleepThe Sleep state is automatically initiated after a period of inactivity. Your work is saved to memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more information, see Initiating and exiting Sleep on page 26. HibernationThe Hibernation state is automatically initiated if the battery reaches a critical level or the computer has been in the Sleep state for an extended period of time. In the Hibernation state, your work is saved to a hibernation file and the computer powers down. You can also initiate Hibernation manually. For more information, see Initiating and exiting Hibernation (select products only) on page 27. Initiating and exiting Sleep Select the Start button, select the Power icon, and then select Sleep. Close the display (select products only). You can initiate Sleep in any of the following ways:

Briefly press the power button (select products only). Press the Sleep hot key (select products only); for example, fn+f1 or fn+f12. Briefly press the power button. You can exit Sleep in any of the following ways:

Tap the TouchPad (select products only). Press a key on the keyboard (select products only). If the computer is closed, raise the display (select products only). When the computer exits Sleep, your work returns to the screen. NOTE:

before your work returns to the screen. If you have set a password to be required on exiting Sleep, you must enter your Windows password 26 Chapter 6 Managing power Initiating and exiting Hibernation (select products only) You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. 2. 3. Right-click the Power icon

, and then select Power Options. In the left pane, select Choose what the power buttons do (wording may vary by product). Depending on your product, you can enable Hibernation for battery power or external power in any of the following ways:

Power buttonUnder Power and sleep buttons and lid settings (wording may vary by product), select When I press the power button, and then select Hibernate. Sleep button (select products only)Under Power and sleep buttons and lid settings (wording may vary by product), select When I press the sleep button, and then select Hibernate. Lid (select products only)Under Power and sleep buttons and lid settings (wording may vary by product), select When I close the lid, and then select Hibernate. Power menuSelect Change Settings that are currently unavailable, and then, under Shutdown settings, select the Hibernate check box. The Power menu can be accessed by selecting the Start button. Select Save changes. 4. To initiate Hibernation, use the method that you enabled in step 3. To exit Hibernation, briefly press the power button. NOTE:

password before your work returns to the screen. If you have set a password to be required on exiting Hibernation, you must enter your Windows Shutting down (turning off) the computer CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer. The Shut down command closes all open programs, including the operating system, and then turns off the display and the computer. Shut down the computer when it will be unused and disconnected from external power for an extended period. The recommended procedure is to use the Windows Shut down command. NOTE:

pressing the power button. If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by briefly 1. 2. Save your work and close all open programs. Select the Start button, select the Power icon, and then select Shut down. Shutting down (turning off) the computer 27 If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided:

Press ctrl+alt+delete, select the Power icon, and then select Shut down. Press and hold the power button for at least 10 seconds. If your computer has a user-replaceable battery (select products only), disconnect the computer from external power, and then remove the battery. Using the Power icon and Power Options The Power icon is located on the Windows taskbar. The Power icon allows you to quickly access power settings and view the remaining battery charge. To view the percentage of remaining battery charge, place the mouse pointer over the Power icon

. To use Power Options, rightclick the Power icon

, and then select Power Options. Different Power icons indicate whether the computer is running on battery or external power. Placing the mouse pointer over the icon reveals a message if the battery has reached a low or critical battery level. Running on battery power WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. When a charged battery is in the computer and the computer is not plugged into external power, the computer runs on battery power. When the computer is off and unplugged from external power, the battery in the computer slowly discharges. The computer displays a message when the battery reaches a low or critical battery level. Computer battery life varies, depending on power management settings, programs running on the computer, screen brightness, external devices connected to the computer, and other factors. NOTE: When you disconnect external power, the display brightness is automatically decreased to conserve battery charge. Select computer products can switch between graphic controllers to conserve battery charge. Using HP Fast Charge (select products only) The HP Fast Charge feature allows you to quickly charge your computer battery. Charging time may vary by

+/- 10%. Depending on your computer model and the HP AC adapter provided with your computer, HP Fast Charge operates in one or more of the following ways:

When the remaining battery charge is between zero and 50%, the battery will charge to 50% of full capacity in no more than 30 to 45 minutes, depending on your computer model. When the remaining battery charge is between zero and 90%, the battery will charge to 90% of full capacity in no more than 90 minutes. To use HP Fast Charge, shut down your computer, and then connect the AC adapter to your computer and to external power. 28 Chapter 6 Managing power Displaying battery charge To view the percentage of remaining battery charge, place the mouse pointer over the Power icon

. Finding battery information in HP Support Assistant (select products only) To access battery information:

1. 2. Type support in the taskbar search box, and then select the HP Support Assistant app. or Select the question mark icon in the taskbar. Select Troubleshooting and fixes, and then in the Diagnostics section, select HP Battery Check. If HP Battery Check indicates that your battery should be replaced, contact support. HP Support Assistant provides the following tools and information about the battery:

Information about battery types, specifications, life cycles, and capacity HP Battery Check Conserving battery power To conserve battery power and maximize battery life:

Lower the brightness of the display. Select the Power saver setting in Power Options. Turn off wireless devices when you are not using them. Disconnect unused external devices that are not plugged into an external power source, such as an external hard drive connected to a USB port. Stop, disable, or remove any external media cards that you are not using. Before you leave your work, initiate Sleep or shut down the computer. Identifying low battery levels When a battery that is the sole power source for the computer reaches a low or critical battery level, the following behavior occurs:

The battery light (select products only) indicates a low or critical battery level. or The Power icon shows a low or critical battery notification. NOTE:

on page 28. For additional information about the Power icon, see Using the Power icon and Power Options Running on battery power 29 The computer takes the following actions for a critical battery level:

If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly in the Sleep state and then shuts down and loses any unsaved information. If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates Hibernation. Resolving a low battery level Resolving a low battery level when external power is available Connect one of the following to the computer and to external power:

Optional power adapter purchased as an accessory from HP Optional docking device or expansion product AC adapter Resolving a low battery level when no power source is available Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation 1. 2. Connect the AC adapter to the computer and to external power. Exit Hibernation by pressing the power button. 30 Chapter 6 Managing power 7 Security Protecting the computer Standard security features provided by the Windows operating system and the Windows Computer Setup utility (BIOS, which runs under any operating system) can protect your personal settings and data from a variety of risks. NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. NOTE: Before you send your computer for service, back up and delete confidential files, and remove all password settings. NOTE: Some features listed in this chapter may not be available on your computer. NOTE: Your computer supports Computrace, which is an online security-based tracking and recovery service available in select regions. If the computer is stolen, Computrace can track the computer if the unauthorized user accesses the Internet. You must purchase the software and subscribe to the service in order to use Computrace. For information about ordering the Computrace software, go to http://www.hp.com. Computer risk Unauthorized use of the computer Security feature HP Client Security software, in combination with a password, smart card, contactless card, registered fingerprints, or other authentication credential BIOS power-on password Unauthorized access to Computer Setup (BIOS) BIOS administrator password in Computer Setup*

Unauthorized access to the contents of a hard drive DriveLock password (select products only) in Computer Setup*

Unauthorized startup from an optional external optical drive

(select products only), optional external hard drive (select products only), or internal network adapter Boot options feature in Computer Setup*

Unauthorized access to a Windows user account Windows user password Unauthorized access to data Windows BitLocker Unauthorized removal of the computer Security cable slot (used with an optional security cable on select products only)

*Computer Setup is an embedded, ROM-based utility that can be used even when the operating system is not working or will not load. You can use a pointing device (TouchPad, pointing stick, or USB mouse) or the keyboard to navigate and make selections in Computer Setup. NOTE: On tablets without keyboards, you can use the touch screen. Using passwords A password is a group of characters that you choose to secure your computer information. Several types of passwords can be set, depending on how you want to control access to your information. Passwords can be set in Windows or in Computer Setup, which is preinstalled on the computer. Protecting the computer 31 BIOS administrator, power-on, and DriveLock passwords are set in Computer Setup and are managed by the system BIOS. Windows passwords are set only in the Windows operating system. If you forget both the DriveLock user password and the DriveLock master password set in Computer Setup, the hard drive that is protected by the passwords is permanently locked and can no longer be used. You can use the same password for a Computer Setup feature and for a Windows security feature. Use the following tips for creating and saving passwords:

When creating passwords, follow requirements set by the program. Do not use the same password for multiple applications or websites, and do not reuse your Windows password for any other application or website. Use the Password Manager feature of HP Client Security to store your user names and passwords for your websites and applications. You can securely read them in the future if they cannot be remembered. Do not store passwords in a file on the computer. The following tables list commonly used Windows and BIOS administrator passwords and describe their functions. Setting passwords in Windows Password Administrator password*

Function Protects access to a Windows administrator-level account. NOTE: Setting the Windows administrator password does not set the BIOS administrator password. User password*

*For information about setting a Windows administrator password or a Windows user password, type support in the taskbar search box, and then select the HP Support Assistant app. Protects access to a Windows user account. 32 Chapter 7 Security Setting passwords in Computer Setup Password Function BIOS administrator password*

Protects access to Computer Setup. Power-on password DriveLock master password*

DriveLock user password*

NOTE:

If features have been enabled to prevent removing the BIOS administrator password, you may not be able to remove it until those features have been disabled. Must be entered each time you turn on or restart the computer. If you forget your power-on password, you cannot turn on or restart the computer. Protects access to the internal hard drive that is protected by DriveLock, and is set under DriveLock Passwords during the enable process. This password is also used to remove DriveLock protection. Protects access to the internal hard drive that is protected by DriveLock, and is set under DriveLock Passwords during the enable process.

*For details about each of these passwords, see the following topics. Managing a BIOS administrator password To set, change, or delete this password, follow these steps:

Setting a new BIOS administrator password 1. Start Computer Setup. Computers or tablets with keyboards:

Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. Select Security, select Create BIOS administrator password or Set Up BIOS administrator Password

(select products only), and then press enter. 3. When prompted, type a password. 4. When prompted, type the new password again to confirm. 5. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. Changing a BIOS administrator password 1. Start Computer Setup. Computers or tablets with keyboards:

Using passwords 33 Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. 3. Enter your current BIOS administrator password. Select Security, select Change BIOS administrator Password or Change Password (select products only), and then press enter. 4. When prompted, type your current password. 5. When prompted, type your new password. 6. When prompted, type your new password again to confirm. 7. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. Deleting a BIOS administrator password 1. Start Computer Setup. Computers or tablets with keyboards:

Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards:

Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. 3. Enter your current BIOS administrator password. Select Security, select Change BIOS administrator Password or Change Password (select products only), and then press enter. 4. When prompted, type your current password. 5. When prompted for the new password, leave the field empty, and then press enter. 6. When prompted to type your new password again, leave the field empty, and then press enter. 7. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. Entering a BIOS administrator password At the BIOS administrator password prompt, type your password (using the same kind of keys you used to set the password), and then press enter. After two unsuccessful attempts to enter the BIOS administrator password, you must restart the computer and try again. 34 Chapter 7 Security Using DriveLock Security Options DriveLock protection prevents unauthorized access to the contents of a hard drive. DriveLock can be applied only to the internal hard drive(s) of the computer. After DriveLock protection is applied to a drive, the appropriate password must be entered to access the drive. The drive must be inserted into the computer or an advanced port replicator in order for it to be unlocked. DriveLock Security Options offers the following features:

Automatic DriveLockSee Selecting Automatic DriveLock (select products only) on page 35. Set DriveLock Master PasswordSee Selecting manual DriveLock on page 36. Enable DriveLockSee Enabling DriveLock and setting a DriveLock user password on page 37. Selecting Automatic DriveLock (select products only) A BIOS administrator password must be set before you can enable Automatic DriveLock. When Automatic DriveLock is enabled, a random DriveLock user password and a DriveLock master password derived from the BIOS administrator password are created. When the computer is turned on, the random user password automatically unlocks the drive. If the drive is moved to another computer, you must enter the BIOS administrator password for the original computer at the DriveLock password prompt to unlock the drive. Enabling Automatic DriveLock To enable Automatic DriveLock, follow these steps:

1. Start Computer Setup. Computers or tablets with keyboards:

1. 2. Tablets without keyboards:

1. 2. Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. 3. 4. 5. At the BIOS administrator password prompt, enter the BIOS administrator password, and then press enter. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Use the enter key, left mouse click, or touch screen to select the Automatic DriveLock check box. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Disabling Automatic DriveLock To disable Automatic DriveLock, follow these steps:

1. Start Computer Setup. Computers or tablets with keyboards:

Using passwords 35 Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. 1. 2. Tablets without keyboards:

1. 2. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. 3. 4. 5. 6. At the BIOS administrator password prompt, enter the BIOS administrator password, and then press enter. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Select an internal hard drive, and then press enter. Use the enter key, left mouse click, or touch screen to clear the Automatic DriveLock check box. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Entering an Automatic DriveLock password While Automatic DriveLock is enabled and the drive remains attached to the original computer, you will not be prompted to enter a DriveLock password to unlock the drive. However, if the drive is moved to another computer, or the system board is replaced on the original computer, you will be prompted to provide the DriveLock password. If this happens, at the DriveLock Password prompt, type the BIOS administrator password for the original computer (using the same kind of keys you used to set the password), and then press enter to unlock the drive. After three incorrect attempts to enter the password, you must shut down the computer and try again. Selecting manual DriveLock CAUTION: To prevent a DriveLock-protected hard drive from becoming permanently unusable, record the DriveLock user password and the DriveLock master password in a safe place away from your computer. If you forget both DriveLock passwords, the hard drive will be permanently locked and can no longer be used. To manually apply DriveLock protection to an internal hard drive, a master password must be set, and DriveLock must be enabled in Computer Setup. Note the following considerations about using DriveLock protection:

After DriveLock protection is applied to a hard drive, the hard drive can be accessed only by entering either the DriveLock user password or the master password. The owner of the DriveLock user password should be the day-to-day user of the protected hard drive. The owner of the DriveLock master password may be either a system administrator or the day-to-day user. The DriveLock user password and the DriveLock master password can be identical. 36 Chapter 7 Security Setting a DriveLock master password To set a DriveLock master password, follow these steps:

1. Start Computer Setup. Computers or tablets with keyboards:

1. 2. Tablets without keyboards:

1. 2. Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. 3. 4. 5. 6. 7. Select Security, make the selection for Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Select the hard drive you want to protect, and then press enter. Select Set DriveLock Master Password, and then press enter. Carefully read the warning. Follow the on-screen instructions to set a DriveLock master password. NOTE: You can enable DriveLock and set a DriveLock user password before exiting from Computer Setup. For more information, see Enabling DriveLock and setting a DriveLock user password on page 37. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Enabling DriveLock and setting a DriveLock user password To enable DriveLock, and set a DriveLock user password, follow these steps:

1. Start Computer Setup. Computers or tablets with keyboards:

1. 2. Tablets without keyboards:

1. 2. Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. 3. 4. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Select the hard drive you want to protect, and then press enter. Select Enable DriveLock and then press enter. Using passwords 37 5. 6. 7. Carefully read the warning. Follow the on-screen instructions to set a DriveLock user password and enable DriveLock. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Disabling DriveLock 1. 2. 3. 4. 5. 6. Start Computer Setup. Computers or tablets with keyboards:

1. 2. Tablets without keyboards:

1. 2. Turn off the computer. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. Select the hard drive you want to manage, and then press enter. Select Disable DriveLock, and then press enter. Follow the on-screen instructions to disable DriveLock. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Entering a DriveLock password Be sure that the hard drive is inserted into the computer (not into an optional docking device or external MultiBay). At the DriveLock Password prompt, type your DriveLock user or master password (using the same kind of keys you used to set the password), and then press enter. After three incorrect attempts to enter the password, you must shut down the computer and try again. Changing a DriveLock password To change a DriveLock password in Computer Setup, follow these steps:

1. 2. 3. Turn off the computer. Press the power button. At the DriveLock Password prompt, type the current DriveLock user password or master password that you are changing, press enter, and then press or tap f10 to enter Computer Setup. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. 4. 38 Chapter 7 Security Select the hard drive you want to manage, and then press enter. 5. 6. Make the selection for the DriveLock password that you want to change, and then follow the on-screen instructions to enter passwords. NOTE: The Change DriveLock Master Password option is visible only if the DriveLock master password was provided at the DriveLock Password prompt in step 3. 7. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Windows Hello (select products only) On products equipped with a fingerprint reader or an infrared camera, you can use Windows Hello to sign in by swiping your finger or looking at the camera. To set up Windows Hello:

1. 2. 3. Select the Start button, select Settings, select Accounts, and then select Sign-in options. To add a password, select Add. Select Get Started, and then follow the on-screen instructions enroll your fingerprint or facial ID and set up a PIN. NOTE: The PIN is not limited in length, but it must consist of numbers only. To include alphabetic or special characters, select the include letters and symbols checkbox. Using antivirus software When you use the computer to access e-mail, a network, or the Internet, you potentially expose it to computer viruses. Computer viruses can disable the operating system, programs, or utilities, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and, in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. Windows Defender is preinstalled on your computer. It is strongly recommended that you continue to use an antivirus program in order to fully protect your computer. For more information about computer viruses, access the HP Support Assistant. Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be a software program you install on your computer and/or network, or it can be a solution made up of both hardware and software. There are two types of firewalls to consider:

Host-based firewallsSoftware that protects only the computer it is installed on. Network-based firewallsInstalled between your DSL or cable modem and your home network to protect all the computers on the network. Windows Hello (select products only) 39 When a firewall is installed on a system, all data sent to and from the system is monitored and compared with a set of user-defined security criteria. Any data that does not meet those criteria is blocked. Your computer or networking equipment may already have a firewall installed. If not, firewall software solutions are available. NOTE: Under some circumstances a firewall can block access to Internet games, interfere with printer or file sharing on a network, or block authorized e-mail attachments. To temporarily resolve the problem, disable the firewall, perform the task that you want to perform, and then reenable the firewall. To permanently resolve the problem, reconfigure the firewall. Installing software updates HP, Windows, and third-party software installed on your computer should be regularly updated to correct security problems and improve software performance. IMPORTANT: Microsoft sends out alerts regarding Windows updates, which may include security updates. To protect the computer from security breaches and computer viruses, install all updates from Microsoft as soon as you receive an alert. You can install these updates automatically. To view or change the settings:

1. 2. 3. Select the Start button, select Settings, and then select Update & Security. Select Windows Update, and then follow the on-screen instructions. To schedule a time for installing updates, select Advanced Options, and then follow the on-screen instructions. Using HP Client Security (select products only) HP Client Security software is preinstalled on your computer. This software can be accessed through the HP Client Security icon at the far right of the taskbar or Windows Control Panel. It provides security features that help protect against unauthorized access to the computer, networks, and critical data. For more information, see the HP Client Security software Help. Using HP Device as a Service (HP DaaS) (select products only) HP DaaS is a cloud-based IT solution that enables businesses to effectively manage and secure their company assets. HP DaaS helps protect devices against malware and other attacks, monitors device health, and helps reduce time spent solving device and security issues. You can quickly download and install the software, which is highly cost effective relative to traditional in-house solutions. For more information, go to https://www.hptouchpointmanager.com/. Using an optional security cable (select products only) A security cable (purchased separately) is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. To connect a security cable to your computer, follow the device manufacturer's instructions. 40 Chapter 7 Security Using a fingerprint reader (select products only) Integrated fingerprint readers are available on select products. In order to use the fingerprint reader, you must enroll your fingerprints in HP Client Security's Credential Manager. Refer to the HP Client Security software Help. After you enroll your fingerprints in Credential Manager, you can use HP Client Security's Password Manager to store and fill in your user names and passwords in supported websites and applications. Locating the fingerprint reader On the right side of the keyboard Near the bottom of the TouchPad The fingerprint reader is a small metallic sensor that is located in one of the following areas of your computer:

On the upper-right side of the display On the left side of the display On the back of the display Depending on your product, the reader may be oriented horizontally or vertically. Using a fingerprint reader (select products only) 41 8 Maintenance It is important to perform regular maintenance to keep your computer in optimal condition. This chapter explains how to use tools like Disk Defragmenter and Disk Cleanup. It also provides instructions for updating programs and drivers, steps to clean the computer, and tips for traveling with (or shipping) the computer. Improving performance You can improve the performance of your computer by performing regular maintenance tasks with tools such as Disk Defragmenter and Disk Cleanup. Using Disk Defragmenter HP recommends using Disk Defragmenter to defragment your hard drive at least once a month. NOTE:

It is not necessary to run Disk Defragmenter on solid-state drives. To run Disk Defragmenter:

1. 2. Connect the computer to AC power. Type defragment in the taskbar search box, and then select Defragment and optimize your drives. Follow the on-screen instructions. 3. For additional information, access the Disk Defragmenter software Help. Using Disk Cleanup Use Disk Cleanup to search the hard drive for unnecessary files that you can safely delete to free up disk space and help the computer run more efficiently. To run Disk Cleanup:

1. Type disk in the taskbar search box, and then select Disk Cleanup. Follow the on-screen instructions. 2. 42 Chapter 8 Maintenance Using HP 3D DriveGuard (select products only) HP 3D DriveGuard protects a hard drive by parking the drive and halting data requests under either of the following conditions:

You move the computer with the display closed while the computer is running on battery power. You drop the computer. A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal operation. NOTE: Only internal hard drives are protected by HP 3D DriveGuard. A hard drive installed in an optional docking device or connected to a USB port is not protected by HP 3D DriveGuard. NOTE: Because solid-state drives (SSDs) lack moving parts, HP 3D DriveGuard is unnecessary for these drives. Identifying HP 3D DriveGuard status The hard drive light on the computer changes color to show that the drive in a primary hard drive bay and/or the drive in a secondary hard drive bay (select products only) is parked. Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis. Updates can resolve issues and bring new features and options to your computer. For example, older graphics components might not work well with the most recent gaming software. Without the latest driver, you would not be getting the most out of your equipment. Go to http://www.hp.com/support to download the latest versions of HP programs and drivers. In addition, register to receive automatic notifications when updates become available. If you would like to update your programs and drivers, follow these instructions:

1. Type support in the taskbar search box, and then select the HP Support Assistant app. or Select the question mark icon in the taskbar. Select My notebook, select the Updates tab, and then select Check for updates and messages. Follow the on-screen instructions. 2. 3. Cleaning your computer Alcohol-free glass-cleaning fluid Use the following products to safely clean your computer:

Solution of water and mild soap Static-free cloth wipes Dry microfiber cleaning cloth or a chamois (static-free cloth without oil) Updating programs and drivers 43 CAUTION: Avoid strong cleaning solvents or germicidal wipes that can permanently damage your computer. If you are not sure that a cleaning product is safe for your computer, check the product contents to make sure that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product. Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and cleaning agents can get trapped in the scratches. Cleaning procedures Follow the procedures in this section to safely clean your computer. WARNING! To prevent electric shock or damage to components, do not attempt to clean your computer while it is on. 1. 2. 3. CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on any computer surface. Liquids dripped on the surface can permanently damage internal components. Turn off the computer. Disconnect AC power. Disconnect all powered external devices. Cleaning the display Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that a display is dry before you close the computer. Cleaning the sides or cover To clean the sides or cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously, or use an acceptable disposable wipe. NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and debris. Cleaning the TouchPad, keyboard, or mouse (select products only) WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. CAUTION: To prevent damage to internal components, do not allow liquids to drip between the keys. To clean the TouchPad, keyboard, or mouse, use a soft microfiber cloth or a chamois moistened with one of the cleaning solutions listed previously. To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a can of compressed air with a straw extension. Traveling with or shipping your computer If you have to travel with or ship your computer, follow these tips to keep your equipment safe. Prepare the computer for traveling or shipping:

Back up your information to an external drive. Remove all discs and all external media cards, such as memory cards. 44 Chapter 8 Maintenance Turn off and then disconnect all external devices. Shut down the computer. Take along a backup of your information. Keep the backup separate from the computer. When traveling by air, carry the computer as hand luggage; do not check it in with the rest of your luggage. CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you are allowed to use your computer. In-flight computer use is at the discretion of the airline. If you are shipping the computer or a drive, use suitable protective packaging and label the package FRAGILE. The use of wireless devices may be restricted in some environments. Such restrictions may apply aboard aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that applies to the use of a wireless device in your computer, ask for authorization to use your computer before you turn it on. If you are traveling internationally, follow these suggestions:

Check the computer-related customs regulations for each country or region on your itinerary. Check the power cord and adapter requirements for each location in which you plan to use the computer. Voltage, frequency, and plug configurations vary. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. Traveling with or shipping your computer 45 9 Backing up, restoring, and recovering This chapter provides information about the following processes, which are standard procedure for most products:

Backing up your personal informationYou can use Windows tools to back up your personal information (see Using Windows tools on page 46). Creating a restore pointYou can use Windows tools to create a restore point (see Using Windows tools on page 46). Creating recovery media (select products only)You can use HP Recovery Manager or HP Cloud Recovery Download Tool (select products only) to create recovery media (see Creating HP Recovery media (select products only) on page 46). Restoring and recoveryWindows offers several options for restoring from backup, refreshing the computer, and resetting the computer to its original state (see Using Windows tools on page 46). Removing the Recovery PartitionTo remove the Recovery partition to reclaim hard drive space

(select products only), select the Remove Recovery Partition option of HP Recovery Manager. For more information, see Removing the HP Recovery partition (select products only) on page 50. Using Windows tools IMPORTANT: Windows is the only option that allows you to back up your personal information. Schedule regular backups to avoid information loss. You can use Windows tools to back up personal information and create system restore points and recovery media, allowing you to restore from backup, refresh the computer, and reset the computer to its original state. NOTE:

If computer storage is 32 GB or less, Microsoft System Restore is disabled by default. For more information and steps, see the Get Help app. 1. 2. Select the Start button, and then select the Get Help app. Enter the task you want to perform. NOTE: You must be connected to the Internet to access the Get Help app. Creating HP Recovery media (select products only) After you have successfully set up the computer, use HP Recovery Manager to create a backup of the HP Recovery partition on the computer. This backup is called HP Recovery media. In cases where the hard drive is corrupted or has been replaced, the HP Recovery media can be used to reinstall the original operating system. To check for the presence of the Recovery partition in addition to the Windows partition, right-click the Start button, select File Explorer, and then select This PC. NOTE:

If your computer does not list the Recovery partition in addition to the Windows partition, contact support to obtain recovery discs. Go to http://www.hp.com/support, select your country or region, and then follow the on-screen instructions. 46 Chapter 9 Backing up, restoring, and recovering On select products, you can use the HP Cloud Recovery Download Tool to create HP Recovery media on a bootable USB flash drive. For more information, see Using the HP Cloud Recovery Download Tool to create recovery media on page 48. Using HP Recovery Manager to create recovery media NOTE:

http://www.hp.com/support, select your country or region, and then follow the on-screen instructions. If you cannot create recovery media yourself, contact support to obtain recovery discs. Go to Before you begin Before you begin, note the following:

Only one set of recovery media can be created. Handle these recovery tools carefully, and keep them in a safe place. HP Recovery Manager examines the computer and determines the required media storage capacity. To create recovery media, use one of the following options:

NOTE:

If the computer does not have a recovery partition, HP Recovery Manager displays the Windows Create a Recovery Drive feature. Follow the on-screen instructions to create a recovery image on a blank USB flash drive or hard drive. If your computer has an optical drive with DVD writer capability, be sure to use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use rewritable discs such as CDRW, DVDRW, double-layer DVDRW, or BD-RE (rewritable Blu-ray) discs, which are not compatible with HP Recovery Manager software. If your computer does not include an integrated optical drive with DVD writer capability, you can use an external optical drive (purchased separately) to create recovery discs, as described above. If an external optical drive is used, you must connect it directly to a USB port on the computer. It cannot be connected to a USB port on an external device, such as a USB hub. To create a recovery USB flash drive, use a high-quality blank USB flash drive. Be sure that the computer is connected to AC power before you begin creating the recovery media. The creation process can take an hour or more. Do not interrupt this process. If necessary, you can exit the program before you have finished creating all of the recovery media. HP Recovery Manager will finish the current DVD or USB flash drive. The next time you start HP Recovery Manager, you will be prompted to continue. Creating the recovery media To create HP Recovery media using HP Recovery Manager:

IMPORTANT:

beginning these steps. For a tablet with a detachable keyboard, connect the tablet to the keyboard base before 1. Type recovery in the taskbar search box, and then select HP Recovery Manager. Select Create recovery media, and then follow the on-screen instructions. 2. If you need to recover the system, see Recovering using HP Recovery Manager on page 48. Creating HP Recovery media (select products only) 47 Using the HP Cloud Recovery Download Tool to create recovery media To create HP Recovery media using the HP Cloud Recovery Download Tool:

1. 2. Go to http://www.hp.com/support. Select Software and Drivers, and then follow the on-screen instructions. Restoring and recovery Restoring and recovery can be performed using one or more of the following options: Windows tools, HP Recovery Manager, or the HP Recovery partition. IMPORTANT: Not all methods are available on all products. Restoring, resetting, and refreshing using Windows tools Windows offers several options for restoring, resetting, and refreshing the computer. For details, see Using Windows tools on page 46. Restoring using HP Recovery Manager and the HP Recovery partition You can use HP Recovery Manager and the HP Recovery partition (select products only) to restore the computer to the original factory state:

Resolving problems with preinstalled applications or driversTo correct a problem with a preinstalled application or driver:

1. Type recovery in the taskbar search box, and then select HP Recovery Manager. Select Reinstall drivers and/or applications, and then follow the on-screen instructions. 2. Using System RecoveryTo recover the Windows partition to original factory content, select the System Recovery option from the HP Recovery partition (select products only) or use the HP Recovery media. For more information, see Recovering using HP Recovery Manager on page 48. If you have not already created recovery media, see Creating HP Recovery media (select products only) on page 46. Using Factory Reset (select products only)Restores the computer to its original factory state by deleting all information from the hard drive and recreating the partitions and then reinstalling the operating system and the software that was installed at the factory (select products only). To use the Factory Reset option, you must use HP Recovery media. If you have not already created recovery media, see Creating HP Recovery media (select products only) on page 46. NOTE:

install the operating system and the software that was installed at the factory. If you have replaced the hard drive in the computer, you can use the Factory Reset option to Recovering using HP Recovery Manager You can use HP Recovery Manager software to recover the computer to its original factory state by using the HP Recovery media that you either created or that you obtained from HP, or by using the HP Recovery partition (select products only). If you have not already created HP Recovery media, see Creating HP Recovery media (select products only) on page 46. IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before beginning recovery, back up any personal data that you want to retain. See Using Windows tools on page 46. 48 Chapter 9 Backing up, restoring, and recovering IMPORTANT: Recovery through HP Recovery Manager should be used as a final attempt to correct computer issues. NOTE: When you start the recovery process, only the options available for your computer are displayed. Before you begin, note the following:

HP Recovery Manager recovers only software that was installed at the factory. For software not provided with this computer, you must either download the software from the manufacturer's website or reinstall the software from the media provided by the manufacturer. If the computer hard drive fails, HP Recovery media must be used. This media is created using HP Recovery Manager. See Creating HP Recovery media (select products only) on page 46. If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not work, contact support to obtain recovery media. Go to http://www.hp.com/support, select your country or region, and then follow the on-screen instructions. Recovering using the HP Recovery partition (select products only) The HP Recovery partition allows you to perform a system recovery without recovery discs or a recovery USB flash drive. This type of recovery can be used only if the hard drive is still working. The HP Recovery partition (select products only) allows System Recovery only. To start HP Recovery Manager from the HP Recovery partition:

IMPORTANT:

beginning these steps (select products only). For a tablet with a detachable keyboard, connect the tablet to the keyboard base before 1. 2. 3. Type recovery in the taskbar search box, select HP Recovery Manager, and then select Windows Recovery Environment. or For computers or tablets with keyboards attached:

Press f11 while the computer boots, or press and hold f11 as you press the power button. For tablets without keyboards:

Turn on or restart the tablet, quickly hold down the volume up button, and then select f11. Select Troubleshoot from the boot options menu. Select Recovery Manager, and then follow the on-screen instructions. If your computer does not automatically restart in HP Recovery Manager, change the computer NOTE:

boot order, and then follow the on-screen instructions. See Changing the computer boot order on page 50. Recovering using HP Recovery media If your computer does not have an HP Recovery partition or if the hard drive is not working properly, you can use HP Recovery media to recover the original operating system and software programs that were installed at the factory. Insert the HP Recovery media, and then restart the computer. Restoring and recovery 49 If your computer does not automatically restart in HP Recovery Manager, change the computer NOTE:

boot order, and then follow the on-screen instructions. See Changing the computer boot order on page 50. Changing the computer boot order If your computer does not restart in HP Recovery Manager, you can change the computer boot order. This is the order of devices listed in BIOS where the computer looks for startup information. You can change the selection to an optical drive or a USB flash drive, depending on the location of your HP Recovery media. To change the boot order:

IMPORTANT:

beginning these steps. For a tablet with a detachable keyboard, connect the tablet to the keyboard base before 1. 2. Insert the HP Recovery media. Access the system Startup menu. For computers or tablets with keyboards attached:

Turn on or restart the computer, quickly press esc, and then press f9 for boot options. For tablets without keyboards:

Turn on or restart the tablet, quickly hold down the volume up button, and then select f9. or Turn on or restart the tablet, quickly hold down the volume down button, and then select f9. 3. Select the optical drive or USB flash drive from which you want to boot, and then follow the on-screen instructions. Removing the HP Recovery partition (select products only) HP Recovery Manager software allows you to remove the HP Recovery partition (select products only) to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you will not be able to perform System Recovery or create HP Recovery media. Before removing the Recovery partition, create HP Recovery media. See Creating HP Recovery media (select products only) on page 46. Follow these steps to remove the HP Recovery partition:

1. Type recovery in the taskbar search box, and then select HP Recovery Manager. Select Remove Recovery Partition, and then follow the on-screen instructions. 2. 50 Chapter 9 Backing up, restoring, and recovering 10 Computer Setup (BIOS), TPM, and HP Sure Start Using Computer Setup Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup includes settings for the types of devices installed, the startup sequence of the computer, and the amount of system and extended memory. NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the computer from operating properly. Starting Computer Setup Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Navigating and selecting in Computer Setup To select a menu or a menu item, use the tab key and the keyboard arrow keys and then press enter, or use a pointing device to select the item. To scroll up and down, select the up arrow or the down arrow in the upper-right corner of the screen, or use the up arrow key or the down arrow key on the keyboard. To close open dialog boxes and return to the main Computer Setup screen, press esc, and then follow the on-screen instructions. To exit Computer Setup, choose one of the following methods:

To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. To save your changes and exit Computer Setup menus, select Main, select Save Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Your changes go into effect when the computer restarts. Restoring factory settings in Computer Setup NOTE: Restoring defaults will not change the hard drive mode. To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

1. 2. Start Computer Setup. See Starting Computer Setup on page 51. Select Main, select Apply Factory Defaults and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. Using Computer Setup 51 NOTE: On select products, the selections may display Restore Defaults instead of Apply Factory Defaults and Exit. Your changes go into effect when the computer restarts. NOTE: Your password settings and security settings are not changed when you restore the factory settings. Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version To decide whether you need to update Computer Setup (BIOS), first determine the BIOS version on your computer. BIOS version information (also known as ROM date and System BIOS) can be accessed by pressing fn+esc (if you are already in Windows) or by using Computer Setup. 1. 2. 3. Start Computer Setup. See Starting Computer Setup on page 51. Select Main, and then select System Information. To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and Exit, and then select Yes. NOTE:

If you are using arrow keys to highlight your choice, you must then press enter. To check for later BIOS versions, see Downloading a BIOS update on page 52. Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the computer is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power on the computer by unplugging the power cord from the AC outlet. Do not shut down the computer or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. 1. 2. 3. 4. Type support in the taskbar search box, and then select the HP Support Assistant app. or Select the question mark icon in the taskbar. Select Updates, and then select Check for updates and messages. Follow the on-screen instructions. At the download area, follow these steps:

52 Chapter 10 Computer Setup (BIOS), TPM, and HP Sure Start a. b. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. Make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. Follow the on-screen instructions to download your selection to the hard drive. Make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update. NOTE:

any software updates, especially system BIOS updates. If you connect your computer to a network, consult the network administrator before installing BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the download is complete. If no instructions are displayed, follow these steps:

1. Type file in the taskbar search box, and then select File Explorer. Select your hard drive designation. The hard drive designation is typically Local Disk (C:). Using the hard drive path you recorded earlier, open the folder that contains the update. Double-click the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. Complete the installation by following the on-screen instructions. 2. 3. 4. 5. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. Changing the boot order using the f9 prompt To dynamically choose a boot device for the current startup sequence, follow these steps:

1. Access the Boot Device Options menu:

Turn on or restart the computer, and when the HP logo appears, press f9 to enter the Boot Device Options menu. 2. Select a boot device, press enter, and then follow the on-screen instructions. TPM BIOS settings (select products only) IMPORTANT: Before enabling Trusted Platform Module (TPM) functionality on this system, you must ensure that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or licenses must be obtained if applicable. For any compliance issues arising from your operation/usage of TPM which violates the above mentioned requirement, you shall bear all the liabilities wholly and solely. HP will not be responsible for any related liabilities. TPM provides additional security for your computer. You can modify the TPM settings in Computer Setup

(BIOS). NOTE:

If you change the TPM setting to Hidden, TPM is not visible in the operating system. To access TPM settings in Computer Setup:

1. 2. Start Computer Setup. See Starting Computer Setup on page 51. Select Security, select TPM Embedded Security, and then follow the on-screen instructions. TPM BIOS settings (select products only) 53 Using HP Sure Start (select products only) Select computer models are configured with HP Sure Start, a technology that monitors the computer's BIOS for attacks or corruption. If the BIOS becomes corrupted or is attacked, HP Sure Start automatically restores the BIOS to its previously safe state, without user intervention. HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default configuration. The default configuration can be customized by advanced users. To access the latest documentation on HP Sure Start, go to http://www.hp.com/support. Select Find your product, and then follow the on-screen instructions. 54 Chapter 10 Computer Setup (BIOS), TPM, and HP Sure Start 11 Using HP PC Hardware Diagnostics Using HP PC Hardware Diagnostics Windows (select products only) HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs within the Windows operating system in order to diagnose hardware failures. If HP PC Hardware Diagnostics Windows is not installed on your computer, first you must download and install it. To download HP PC Hardware Diagnostics Windows, see Downloading HP PC Hardware Diagnostics Windows on page 55. After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from HP Help and Support or HP Support Assistant. 1. To access HP PC Hardware Diagnostics Windows from HP Help and Support:

a. b. Select the Start button, and then select HP Help and Support. Right-click HP PC Hardware Diagnostics Windows, select More, and then select Run as administrator. or To access HP PC Hardware Diagnostics Windows from HP Support Assistant:

a. Type support in the taskbar search box, and then select the HP Support Assistant app. or Select the question mark icon in the taskbar. Select Troubleshooting and fixes. Select Diagnostics, and then select HP PC Hardware Diagnostics Windows. b. c. 2. When the tool opens, select the type of diagnostic test you want to run, and then follow the on-screen instructions. NOTE:

If you need to stop a diagnostic test at any time, select Cancel. 3. When HP PC Hardware Diagnostics Windows detects a failure that requires hardware replacement, a 24-

digit Failure ID code is generated. For assistance in correcting the problem, contact support, and then provide the Failure ID code. Downloading HP PC Hardware Diagnostics Windows The HP PC Hardware Diagnostics Windows download instructions are provided in English only. You must use a Windows computer to download this tool because only .exe files are provided. Using HP PC Hardware Diagnostics Windows (select products only) 55 Downloading the latest HP PC Hardware Diagnostics Windows version To download HP PC Hardware Diagnostics Windows, follow these steps:

1. 2. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed. In the HP PC Hardware Diagnostics section, select Download, and then select a location on your computer or a USB flash drive. The tool is downloaded to the selected location. Downloading HP Hardware Diagnostics Windows by product name or number (select products only) NOTE:

product name or number. For some products, it may be necessary to download the software to a USB flash drive by using the To download HP PC Hardware Diagnostics Windows by product name or number, follow these steps:

1. 2. Go to http://www.hp.com/support. Select Get software and drivers, select your type of product, and then enter the product name or number in the search box that is displayed. In the HP PC Hardware Diagnostics section, select Download, and then select a location on your computer or a USB flash drive. 3. The tool is downloaded to the selected location. Installing HP PC Hardware Diagnostics Windows To install HP PC Hardware Diagnostics Windows, follow these steps:

Navigate to the folder on your computer or the USB flash drive where the .exe file was downloaded, double-click the .exe file, and then follow the on-screen instructions. Using HP PC Hardware Diagnostics UEFI NOTE:

For Windows 10 S computers, you must use a Windows computer and a USB flash drive to download and create the HP UEFI support environment because only .exe files are provided. For more information, see Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive on page 57. HP PC Hardware Diagnostics UEFI (Unified Extensible Firmware Interface) allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components. If your PC will not boot into Windows, you can use HP PC Hardware Diagnostics UEFI to diagnose hardware issues. When HP PC Hardware Diagnostics UEFI detects a failure that requires hardware replacement, a 24-digit Failure ID code is generated. For assistance in correcting the problem, contact support, and provide the Failure ID code. NOTE: To start diagnostics on a convertible computer, your computer must be in notebook mode, and you must use the attached keyboard. NOTE:

If you need to stop a diagnostic test, press esc. 56 Chapter 11 Using HP PC Hardware Diagnostics Starting HP PC Hardware Diagnostics UEFI To start HP PC Hardware Diagnostics UEFI, follow these steps:

1. 2. Turn on or restart the computer, and quickly press esc. Press f2. The BIOS searches three places for the diagnostic tools, in the following order:

a. Connected USB flash drive NOTE: To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see Downloading the latest HP PC Hardware Diagnostics UEFI version on page 57. b. c. Hard drive BIOS 3. When the diagnostic tool opens, select a language, select the type of diagnostic test you want to run, and then follow the on-screen instructions. Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive HP PC Hardware Diagnostics UEFI is not included in the preinstall image. Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive can be useful in the following situations:

HP PC Hardware Diagnostics UEFI is not included in the HP Tool partition. The hard drive is damaged. NOTE: The HP PC Hardware Diagnostics UEFI download instructions are provided in English only, and you must use a Windows computer to download and create the HP UEFI support environment because only .exe files are provided. Downloading the latest HP PC Hardware Diagnostics UEFI version To download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive:

1. 2. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed. In the HP PC Hardware Diagnostics UEFI section, select Download UEFI Diagnostics, and then select Run. Downloading HP PC Hardware Diagnostics UEFI by product name or number (select products only) NOTE:

product name or number. For some products, it may be necessary to download the software to a USB flash drive by using the To download HP PC Hardware Diagnostics UEFI by product name or number (select products only) to a USB flash drive:

1. 2. 3. Go to http://www.hp.com/support. Enter the product name or number, select your computer, and then select your operating system. In the Diagnostics section, follow the on-screen instructions to select and download the specific UEFI Diagnostics version for your computer. Using HP PC Hardware Diagnostics UEFI 57 Using Remote HP PC Hardware Diagnostics UEFI settings (select products only) Remote HP PC Hardware Diagnostics UEFI is a firmware (BIOS) feature that downloads HP PC Hardware Diagnostics UEFI to your computer. It can then execute the diagnostics on your computer, and it may upload results to a preconfigured server. For more information on Remote HP PC Hardware Diagnostics UEFI, go to http://www.hp.com/go/techcenter/pcdiags, and then select Find out more. Downloading Remote HP PC Hardware Diagnostics UEFI NOTE: HP Remote PC Hardware Diagnostics UEFI is also available as a Softpaq that can be downloaded to a server. Downloading the latest Remote HP PC Hardware Diagnostics UEFI version To download the latest Remote HP PC Hardware Diagnostics UEFI version, follow these steps:

1. 2. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed. In the HP PC Hardware Diagnostics UEFI section, select Download Remote Diagnostics, and then select Run. Downloading Remote HP PC Hardware Diagnostics UEFI by product name or number NOTE:

number. For some products, it may be necessary to download the software by using the product name or To download HP Remote PC Hardware Diagnostics UEFI by product name or number, follow these steps:

1. 2. Go to http://www.hp.com/support. Select Get software and drivers, select your type of product, enter the product name or number in the search box that is displayed, select your computer, and then select your operating system. In the Diagnostics section, follow the on-screen instructions to select and download the Remote UEFI version for the product. 3. Customizing Remote HP PC Hardware Diagnostics UEFI settings Using the Remote HP PC Hardware Diagnostics setting in Computer Setup (BIOS), you can perform the following customizations:

Set a schedule for running diagnostics unattended. You can also start diagnostics immediately in interactive mode by selecting Execute Remote HP PC Hardware Diagnostics. Set the location for downloading the diagnostic tools. This feature provides access to the tools from the HP website or from a server that has been preconfigured for use. Your computer does not require the traditional local storage (such as a disk drive or USB flash drive) to run remote diagnostics. Set a location for storing the test results. You can also set the user name and password settings used for uploads. Display status information about the diagnostics run previously. To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:

1. 2. Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Select Advanced, and then select Settings. 58 Chapter 11 Using HP PC Hardware Diagnostics 3. Make your customization selections. 4. Your changes take effect when the computer restarts. Select Main, and then Save Changes and Exit to save your settings. Using Remote HP PC Hardware Diagnostics UEFI settings (select products only) 59 12 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100240 V, 5060 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer. The computer can operate on DC power within the following specifications. The voltage and current for your computer is located on the regulatory label. Input Power Rating Operating voltage and current 5 V dc @ 2 A / 12 V dc @ 3 A /15 V dc @ 3 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 3.75 A /15 V dc @ 3 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 3.75 A / 12 V dc @ 3.75 A /

15 V dc @ 3 A / 20 V dc @ 2.25 A 45 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 5 A / 15 V dc @ 4.33 A / 20 V dc @ 3.25 A 65 W USB-C 5 V dc @ 3 A / 9 V dc @ 3A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc

@ 4.33 A / 20 V dc @ 3.25 A 65 W USB-C 5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc

@ 5 A / 20 V dc @ 4.5 A 90 W USB-C 19.5 V dc @ 2.31 A 45 W 19.5 V dc @ 3.33 A 65 W 19.5 V dc @ 4.62 A 90 W 19.5 V dc @ 6.15 A 120 W 19.5 V dc @ 6.9 A 135 W 19.5 V dc @ 7.70 A 150 W 19.5 V dc @ 10.3 A 200 W 19.5 V dc @ 11.8 A 230 W 19.5 V dc @ 16.92 A 330 W NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. 60 Chapter 12 Specifications Operating environment Factor Temperature Operating (writing to optical disc) Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Metric U.S. 5C to 35C

-20C to 60C 10% to 90%

5% to 95%

41F to 95F

-4F to 140F 10% to 90%

5% to 95%

Operating Nonoperating

-15 m to 3,048 m

-15 m to 12,192 m

-50 ft to 10,000 ft

-50 ft to 40,000 ft Operating environment 61 13 Electrostatic Discharge Electrostatic discharge is the release of static electricity when two objects come into contactfor example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:

If removal or installation instructions direct you to unplug the computer, first be sure that it is properly grounded. Keep components in their electrostatic-safe containers until you are ready to install them. Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. Use nonmagnetic tools. Before handling components, discharge static electricity by touching an unpainted metal surface. If you remove a component, place it in an electrostatic-safe container. 62 Chapter 13 Electrostatic Discharge 14 Accessibility Accessibility HP is working to weave diversity, inclusion and work/life into the fabric of our company, so it is reflected in everything we do. Here are some examples of how we are putting differences to work to create an inclusive environment focused on connecting people to the power of technology throughout the world. Finding the technology tools you need Technology can unleash your human potential. Assistive technology removes barriers and helps you create independence at home, at work, and in the community. Assistive technology helps increase, maintain, and improve the functional capabilities of electronic and information technology. For more information, see Finding the best assistive technology on page 64. Our commitment HP is committed to providing products and services that are accessible for people with disabilities. This commitment supports our company's diversity objectives and helps us ensure that the benefits of technology are available to all. Our accessibility goal is to design, produce, and market products and services that can be effectively used by everyone, including people with disabilities, either on a stand-alone basis or with appropriate assistive devices. To achieve our goal, this Accessibility Policy establishes seven key objectives to guide our actions as a company. All HP managers and employees are expected to support these objectives and their implementation in accordance with their roles and responsibilities:

Raise the level of awareness of accessibility issues within our company, and provide our employees with the training they need to design, produce, market, and deliver accessible products and services. Develop accessibility guidelines for products and services, and hold product development groups accountable for implementing these guidelines where competitively, technically, and economically feasible. Involve people with disabilities in the development of accessibility guidelines, and in the design and testing of products and services. Document accessibility features and make information about our products and services publicly available in an accessible form. Establish relationships with leading assistive technology and solution providers. Support internal and external research and development that will improve assistive technology relevant to our products and services. Support and contribute to industry standards and guidelines for accessibility. International Association of Accessibility Professionals (IAAP) IAAP is a not-for-profit association focused on advancing the accessibility profession through networking, education, and certification. The objective is to help accessibility professionals develop and advance their careers and to better enable organizations to integrate accessibility into their products and infrastructure. Accessibility 63 HP is a founding member, and we joined to participate with other organizations to advance the field of accessibility. This commitment supports our companys accessibility goal of designing, producing, and marketing products and services that can be effectively used by people with disabilities. IAAP will make our profession strong by globally connecting individuals, students, and organizations to learn from one another. If you are interested in learning more, go to http://www.accessibilityassociation.org to join the online community, sign up for newsletters, and learn about membership options. Finding the best assistive technology Everyone, including people with disabilities or age-related limitations, should be able to communicate, express themselves, and connect with the world using technology. HP is committed to increasing accessibility awareness within HP and with our customers and partners. Whether its large fonts that are easy on the eyes, voice recognition that lets you give your hands a rest, or any other assistive technology to help with your specific situationa variety of assistive technologies make HP products easier to use. How do you choose?

Assessing your needs Technology can unleash your potential. Assistive technology removes barriers and helps you create independence at home, at work, and in the community. Assistive technology (AT) helps increase, maintain, and improve the functional capabilities of electronic and information technology. You may choose from many AT products. Your AT assessment should allow you to evaluate several products, answer your questions, and facilitate your selection of the best solution for your situation. You will find that professionals qualified to do AT assessments come from many fields, including those licensed or certified in physical therapy, occupational therapy, speech/language pathology, and other areas of expertise. Others, while not certified or licensed, may also provide evaluation information. You will want to ask about the individual's experience, expertise, and fees to determine if they are appropriate for your needs. Accessibility for HP products HP PCsWindows 7 Accessibility Options The following links provide information on accessibility features and assistive technology, if applicable, included in various HP products. These resources will help you select the specific assistive technology features and product(s) most appropriate for your situation. HP Elite x3Accessibility Options (Windows 10 Mobile) HP Slate 7 TabletsEnabling Accessibility Features on Your HP Tablet (Android 4.1/Jelly Bean) HP SlateBook PCsEnabling Accessibility Features (Android 4.3,4.2/Jelly Bean) HP PCsWindows 10 Accessibility Options HP PCsWindows 8 Accessibility Options HP Chromebook PCsEnabling Accessibility Features on Your HP Chromebook or Chromebox (Chrome OS) HP Shoppingperipherals for HP products If you need additional support with the accessibility features on your HP product, see Contacting support on page 69. Additional links to external partners and suppliers that may provide additional assistance:

Microsoft Accessibility information (Windows 7, Windows 8, Windows 10, Microsoft Office) Google Products accessibility information (Android, Chrome, Google Apps) 64 Chapter 14 Accessibility Assistive Technologies sorted by impairment type Assistive Technologies sorted by product type Assistive Technology vendors with product descriptions Assistive Technology Industry Association (ATIA) Standards and legislation Standards Section 508 of the Federal Acquisition Regulation (FAR) standards was created by the US Access Board to address access to information and communication technology (ICT) for people with physical, sensory, or cognitive disabilities. The standards contain technical criteria specific to various types of technologies, as well as performance-based requirements which focus on functional capabilities of covered products. Specific criteria cover software applications and operating systems, web-based information and applications, computers, telecommunications products, video and multi-media, and self-contained closed products. Mandate 376 EN 301 549 The EN 301 549 standard was created by the European Union within Mandate 376 as the basis for an online toolkit for public procurement of ICT products. The standard specifies the functional accessibility requirements applicable to ICT products and services, together with a description of the test procedures and evaluation methodology for each accessibility requirement. Web Content Accessibility Guidelines (WCAG) Web Content Accessibility Guidelines (WCAG) from the W3C's Web Accessibility Initiative (WAI) helps web designers and developers create sites that better meet the needs of people with disabilities or age-related limitations. WCAG advances accessibility across the full range of web content (text, images, audio, and video) and web applications. WCAG can be precisely tested, is easy to understand and use, and allows web developers flexibility for innovation. WCAG 2.0 has also been approved as ISO/IEC 40500:2012. WCAG specifically addresses barriers to accessing the web experienced by people with visual, auditory, physical, cognitive, and neurological disabilities, and by older web users with accessibility needs. WCAG 2.0 provides characteristics of accessible content:

Perceivable (for instance, by addressing text alternatives for images, captions for audio, adaptability of presentation, and color contrast) Operable (by addressing keyboard access, color contrast, timing of input, seizure avoidance, and navigability) Understandable (by addressing readability, predictability, and input assistance) Robust (for instance, by addressing compatibility with assistive technologies) Legislation and regulations Accessibility of IT and information has become an area of increasing legislative importance. This section provides links to information on key legislation, regulations, and standards. United States Canada Europe Standards and legislation 65 United Kingdom Australia Worldwide United States Section 508 of the Rehabilitation Act specifies that agencies must identify which standards apply to the procurement of ICT, perform market research to determine the availability of accessible products and services, and document the results of their market research. The following resources provide assistance in meeting Section 508 requirements:

www.section508.gov Buy Accessible The U.S. Access Board is currently updating the Section 508 standards. This effort will address new technologies and other areas where the standards need to be modified. For more information, go to Section 508 Refresh. Section 255 of the Telecommunications Act requires telecommunications products and services to be accessible to people with disabilities. FCC rules cover all hardware and software telephone network equipment and telecommunications equipment used in the home or office. Such equipment includes telephones, wireless handsets, fax machines, answering machines, and pagers. FCC rules also cover basic and special telecommunications services, including regular telephone calls, call waiting, speed dialing, call forwarding, computer-provided directory assistance, call monitoring, caller identification, call tracing, and repeat dialing, as well as voice mail and interactive voice response systems that provide callers with menus of choices. For more information, go to Federal Communication Commission Section 255 information. 21st Century Communications and Video Accessibility Act (CVAA) The CVAA updates federal communications law to increase the access of persons with disabilities to modern communications, updating accessibility laws enacted in the 1980s and 1990s to include new digital, broadband, and mobile innovations. Regulations are enforced by the FCC and documented as 47 CFR Part 14 and Part 79. FCC Guide on the CVAA Other U.S. legislation and initiatives Americans with Disabilities Act (ADA), Telecommunications Act, the Rehabilitation Act and others Canada The Accessibility for Ontarians with Disabilities Act was established to develop and implement accessibility standards to make goods, services, and facilities accessible to Ontarians with disabilities and to provide for the involvement of persons with disabilities in the development of the accessibility standards. The first standard of the AODA is the customer service standard; however, standards for transportation, employment, and information and communication are also being developed. The AODA applies to the Government of Ontario, the Legislative Assembly, every designated public sector organization, and to every other person or organization that provides goods, services, or facilities to the public or other third parties and that has at least one employee in Ontario; and accessibility measures must be implemented on or before January 1, 2025. For more information, go to Accessibility for Ontarians with Disability Act (AODA) . 66 Chapter 14 Accessibility Europe EU Mandate 376 ETSI Technical Report ETSI DTR 102 612: "Human Factors (HF); European accessibility requirements for public procurement of products and services in the ICT domain (European Commission Mandate M 376, Phase 1)" has been released. Background: The three European Standardization Organizations have set up two parallel project teams to carry out the work specified in the European Commission "Mandate 376 to CEN, CENELEC and ETSI, in Support of Accessibility Requirements for Public Procurement of Products and Services in the ICT Domain."

ETSI TC Human Factors Specialist Task Force 333 has developed ETSI DTR 102 612. Further details about the work performed by STF333 (e.g., Terms of Reference, specification of the detailed work tasks, time plan for the work, previous drafts, listing of comments received and means to contact the task force) can be found at the Special Task Force 333. The parts relating to the assessment of suitable testing and conformity schemes were carried out by a parallel project, detailed in CEN BT/WG185/PT. For further information, go to the CEN project team website. The two projects are closely coordinated. European Commission mandate for e-accessibility (PDF 46KB) Commission takes low profile on e-accessibility CEN project team United Kingdom The Disability Discrimination Act of 1995 (DDA) was enacted to ensure that websites are accessible to blind and disabled users in the United Kingdom. W3C UK Policies Australia The Australian government has announced their plan to implement Web Content Accessibility Guidelines 2.0. All Australian government websites will require Level A compliance by 2012, and Double A by 2015. The new standard replaces WCAG 1.0, which was introduced as a mandated requirement for agencies in 2000. Worldwide JTC1 Special Working Group on Accessibility (SWG-A) G3ict: The Global Initiative for Inclusive ICT Italian accessibility legislation W3C Web Accessibility Initiative (WAI) Standards and legislation 67 Useful accessibility resources and links The following organizations may be good resources for information about disabilities and age-related limitations. NOTE: This is not an exhaustive list. These organizations are provided for informational purposes only. HP assumes no responsibility for information or contacts you may encounter on the Internet. Listing on this page does not imply endorsement by HP. Organizations American Association of People with Disabilities (AAPD) The Association of Assistive Technology Act Programs (ATAP) Hearing Loss Association of America (HLAA) Information Technology Technical Assistance and Training Center (ITTATC) Lighthouse International National Association of the Deaf National Federation of the Blind Rehabilitation Engineering & Assistive Technology Society of North America (RESNA) Telecommunications for the Deaf and Hard of Hearing, Inc. (TDI) W3C Web Accessibility Initiative (WAI) Educational institutions California State University, Northridge, Center on Disabilities (CSUN) University of Wisconsin - Madison, Trace Center University of Minnesota computer accommodations program Other disability resources ADA (Americans with Disabilities Act) Technical Assistance Program Business & Disability network EnableMart European Disability Forum Job Accommodation Network Microsoft Enable U.S. Department of Justice - A Guide to disability rights Laws HP links Our contact webform HP comfort and safety guide HP public sector sales 68 Chapter 14 Accessibility Contacting support NOTE: Support is in English only. Customers who are deaf or hard of hearing that have questions about technical support or accessibility of HP products:

Use TRS/VRS/WebCapTel to call (877) 656-7058 Monday through Friday, 6 a.m. to 9 p.m. Mountain Time. Customers with other disabilities or age-related limitations who have questions about technical support or accessibility of HP products, choose one of the following options:

Call (888) 259-5707 Monday through Friday, 6 a.m. to 9 p.m. Mountain Time. Complete the Contact form for people with disabilities or age-related limitations. Contacting support 69

Regulatory, Safety, and Environmental Notices User Guide Copyright 2018, 2019 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Java is a registered trademark of Oracle and/or its affiliates. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Fourth Edition: April 2019 First Edition: March 2018 Document Part Number: L25269-004 About This Guide This guide provides regulatory, safety, and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, tablets, desktops, thin clients, personal workstations, all-in-ones, and point-of-sale terminals. To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. WARNING!

Indicates a hazardous situation that, if not avoided, could result in serious injury or death. CAUTION:

Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. Indicates information considered important but not hazard-related (for example, messages IMPORTANT:

related to property damage). Warns the user that failure to follow a procedure exactly as described could result in loss of data or in damage to hardware or software. Also contains essential information to explain a concept or to complete a task. NOTE: Contains additional information to emphasize or supplement important points of the main text. TIP: Provides helpful hints for completing a task. iii iv About This Guide Table of contents 1 Regulatory notices ........................................................................................................................................ 1 Accessing regulatory labels ................................................................................................................................... 1 Federal Communications Commission notice ....................................................................................................... 1 Modifications ....................................................................................................................................... 2 Cables .................................................................................................................................................. 2 Products with wireless LAN devices or HP Mobile Broadband Modules ............................................. 2 Belarus regulatory notice ...................................................................................................................................... 3 Brazil notice ........................................................................................................................................................... 3 Canada notices ....................................................................................................................................................... 3 European Union regulatory notices ....................................................................................................................... 3 Declaration of Conformity ................................................................................................................... 3 Products with radio functionality (EMF) ........................................................................... 4 Restrictions for products with radio functionality (select products only) ....................... 4 Radio frequency bands and maximum power levels (select products and countries only) .................................................................................................................. 4 Ergonomics notice ............................................................................................................. 5 European telephone network declaration (Modem/Fax) ................................................. 5 Australia and New Zealand notice ......................................................................................................................... 5 China WWAN notice ................................................................................................................................................ 5 China radio equipment notice ................................................................................................................................ 5 Japan notice ........................................................................................................................................................... 6 Wireless LAN, Wireless WAN, and Bluetooth certification markings ................................................ 6 Mexico notice ......................................................................................................................................................... 6 Singapore wireless notice ...................................................................................................................................... 7 South Korea notices ............................................................................................................................................... 7 Thailand wireless notice ........................................................................................................................................ 7 Taiwan NCC notices ................................................................................................................................................ 8 Wireless LAN 802.11a devices ............................................................................................................ 8 Wireless LAN 802.11 devices/Bluetooth devices/Short range devices .............................................. 8 Airline travel notice ................................................................................................................................................ 8 User-replaceable battery notices .......................................................................................................................... 8 Factory-sealed battery notices ............................................................................................................................. 9 Laser compliance ................................................................................................................................................... 9 Telecommunications device approvals ................................................................................................................. 9 Modem notices ..................................................................................................................................................... 10 U.S. modem statements .................................................................................................................... 10 v U.S. modem declarations .................................................................................................................. 11 Canada modem statements .............................................................................................................. 12 Japan modem statements ................................................................................................................ 12 New Zealand modem statements ..................................................................................................... 12 Voice support .................................................................................................................. 13 Macrovision Corporation notice ........................................................................................................................... 13 2 Safety notices ............................................................................................................................................. 14 Important safety information ............................................................................................................................. 14 Heat-related safety warning notice .................................................................................................................... 15 Potential safety conditions notice ....................................................................................................................... 15 Installation conditions ......................................................................................................................................... 15 Acoustics notice ................................................................................................................................................... 15 Battery notices ..................................................................................................................................................... 15 Fan notices ........................................................................................................................................................... 16 Headset and earphone volume level notice ........................................................................................................ 16 Laser safety ......................................................................................................................................................... 16 Power supply and power cord set requirements ................................................................................................ 17 Power supply class I grounding requirements .................................................................................. 17 Brazil notice .................................................................................................................... 17 Denmark .......................................................................................................................... 17 Finland ............................................................................................................................. 17 Norway ............................................................................................................................ 17 Sweden ............................................................................................................................ 17 Power supply requirements .............................................................................................................. 17 For use in Norway ........................................................................................................... 17 Power cord set requirements ............................................................................................................ 18 Power cord notice .............................................................................................................................. 18 DC plug of external HP power supply ............................................................................. 18 Japan power cord notice ................................................................................................................... 19 Japan power cord requirements ....................................................................................................... 19 Pinch hazard ........................................................................................................................................................ 19 TV antenna connectors protection ...................................................................................................................... 19 External television antenna grounding ............................................................................................ 19 Lightning protection .......................................................................................................................... 19 Note to CATV system installer ........................................................................................................... 20 Travel notice ........................................................................................................................................................ 20 China safety notices ............................................................................................................................................. 21 China: Altitude notice ........................................................................................................................ 21 China: Tropical warning notice .......................................................................................................... 21 Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................................... 22 vi

......................................................................................................................................... 22 3 Environmental notices ................................................................................................................................. 23 Electronic hardware, packaging and battery recycling ....................................................................................... 23 Disposal of waste equipment by users ............................................................................................................... 23 Brazil alkaline battery disposal ........................................................................................................................... 23 Brazil hardware recycling information ................................................................................................................ 23 Taiwan battery recycling information ................................................................................................................. 24 ENERGY STAR Certification (select products only) ............................................................................................ 24 Chemical substances ........................................................................................................................................... 25 Mercury statement .............................................................................................................................................. 25 Perchlorate materialspecial handling may apply ............................................................................................. 25 China environmental notices ............................................................................................................................... 26 China PC energy label .......................................................................................................................................... 26 China restriction of hazardous substances (RoHS) for notebook and tablet computers ................................... 29 The Table of Hazardous Substances/Elements and their Content ................................................... 29

..................................................................... 30 China restriction of hazard substances (ROHS) for desktops, thin clients, personal workstations, all-in-

ones, and point-of-sale terminals ....................................................................................................................... 31 The Table of Hazardous Substances/Elements and their Content ................................................... 31

(ROHS) .................................................................................................................................................................. 33

(RoHS) ..................................................... 35

....................................................................................................... 35

(RoHS) ......................................................................................................................................... 36

....................................................................................................... 36 India restriction of hazardous substances (RoHS) .............................................................................................. 37 Information for European Union Commission Regulation 1275/2008 .............................................................. 37 IT ECO declarations .............................................................................................................................................. 37 Japan restriction of hazardous substances (RoHS) ............................................................................................ 37 Ley para el Aprovechamiento Sustentable de la Energa de Mxico .................................................................. 38 Turkey WEEE regulation ...................................................................................................................................... 38 TCO Certified ........................................................................................................................................................ 39 TCO Certified Edge ................................................................................................................................................ 40 Index ............................................................................................................................................................. 41 vii viii 1 Regulatory notices This chapter provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Accessing regulatory labels Regulatory labels, which provide country or regional regulatory information (for example, FCC ID), may be physically located on the bottom of the computer, inside the battery bay (select products only), under the removable service door (select products only), on the back of the display, or on the wireless or modem module. Some products may also provide electronic regulatory labels (e-labels) that can be accessed through the system BIOS. NOTE: Electronic labels are not available on all products. NOTE: Devices not for sale or use in the United States may not contain a FCC ID. To view electronic regulatory labels:

Turn on or restart the computer. Press esc or f10 to enter Computer Setup. 1. 2. 3. 4. Use a pointing device or the arrow keys to select Advanced, select Electronic Labels, and then press enter. To view an electronic label, use a pointing device or the arrow keys to select one of the listed items, and then press OK. NOTE: The list of available electronic label items varies depending on the computer model and installed devices. 5. To exit Computer Setup menus without making any changes:

Select the Exit icon in the lower-right corner of the screen, and then follow the on-screen instructions. or Use the arrow keys to select Main, select Ignore Changes and Exit, and then press enter. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Accessing regulatory labels 1 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. 1. 2. For questions regarding this product:

Write to:

HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 Call HP at 650-857-1501 or Email techregshelp@hp.com To identify this product, refer to the part, series, or model number found on the product. The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Modifications Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in a manner that is in conformance with the expected typical usage. 2 Chapter 1 Regulatory notices Belarus regulatory notice The product complies with the Belarus National Radio/Telecom Technical Regulation TR 2018/024/BY. Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Ao operar o dispositivo a uma distncia muito prxima do seu corpo, utilize um acessrio de armazenamento no metlico para posicionar o dispositivo a uma distncia mnima de 1,5 cm do corpo. IMPORTANT: A alimentao de energia predefinida para 220/230Vv. Se voc possuir tomada eltrica de 110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tenso correta. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING! Exposure to Radio Frequency Radiation: The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in a manner that is in conformance with the expected typical usage. IMPORTANT: When using IEEE 802.11a, n, or ac wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-

GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. European Union regulatory notices Declaration of Conformity Products bearing the CE marking have been constructed so that they can operate in at least one EU Member State and comply with one or more of the following EU Directives as may be applicable:

Belarus regulatory notice 3 RED 2014/53/EU; Low Voltage Directive 2014/35/EU; EMC Directive 2014/30/EU; Ecodesign Directive 2009/125/EC; RoHS Directive 2011/65/EU. Compliance with these directives is assessed using applicable European Harmonised Standards. The full Declaration of Conformity can be found at the following website: http://www.hp.eu/certificates

(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) The point of contact for regulatory matters is HP Deutschland GmbH, HQ-TRE, 71025, Boeblingen, Germany. Email techregshelp@hp.com Products with radio functionality (EMF) This product incorporates a radio transmitting and receiving device. For notebook computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product. Restrictions for products with radio functionality (select products only) IEEE 802.11x wireless LAN with 5.155.35 GHz frequency band is restricted for IMPORTANT:

indoor use only in all countries reflected in the matrix. Using this WLAN application outdoors might lead to interference issues with existing radio services. IMPORTANT:

excluded in all countries reflected in the matrix. Fixed outdoor installations for WiGig application (5766 GHz frequency band) are Radio frequency bands and maximum power levels (select products and countries only) Maximum Transmit Power EIRP (mW) Radio Technology Bluetooth; 2,4 GHz NFC; 13,56 MHz RFID; 125 kHz/13,56 MHz WLAN Wi-Fi 802.11x; 2,4 GHz WLAN Wi-Fi 802.11x; 5 GHz WWAN 3G UTMS; 900/2100 MHz WWAN 2G GSM GPRS EDGE; 900 MHz WWAN 2G GSM GPRS EDGE; 1800 MHz WiGig 802.11ad; 60 GHz WWAN 4G LTE; 700/800/900/1800/2100/2300/2600/3500 MHz Less than 1 100 10 100 200 200 250 2000 1000 316 NOTE: Use only HP-supported software drivers and correct country settings to ensure compliance. 4 Chapter 1 Regulatory notices Ergonomics notice When a mobile computer is used at the office workstation for display work tasks where the Visual Display Unit

(VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000 (voluntary GS certification) Mobile computers bearing the "GS" approval mark meet the applicable ergonomic requirements. Without external keyboards, they are suitable only for short-time use for VDU tasks. During mobile use with disadvantageous illumination conditions (e.g. direct sunlight) reflections may occur, which result in reduced readability. A computer system comprising HP brand products meets the applicable ergonomic requirements if all affected constituent products bear the "GS" approval mark, for example Business Desktop PC, keyboard, PC-

mouse and monitor. European telephone network declaration (Modem/Fax) The product herewith complies with the requirements of the applicable Directive and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/

regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. Australia and New Zealand notice This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. The computer must be connected to the Telecommunication Network through a line cord that meets the requirements of AS/CA S008. WARNING! Modems without integral RJ11 connector that are shipped with this computer should not be installed in any other device. China WWAN notice China radio equipment notice Australia and New Zealand notice 5 Japan notice V-2 VCCI32-1 5GHz Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. Some products may use electronic regulatory labels (e-labels). To view the certification mark and numbers on an e-label, please refer to the previous Accessing regulatory labels section. e e Mexico notice Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. The regulatory model number for this product is on the regulatory label. If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory. The regulatory model number for this product is on the regulatory label. 6 Chapter 1 Regulatory notices Singapore wireless notice Turn off any WWAN devices while you are aboard aircraft. The use of these devices aboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. South Korea notices Thailand wireless notice

(This telecommunication equipment conforms to the requirements of NBTC.) This radio communication equipment has the electromagnetic field strength in compliance with the Safety Standard for the Use of Radio communication Equipment on Human Health announced by the National Telecommunications Commission. Singapore wireless notice 7 Taiwan NCC notices Wireless LAN 802.11a devices Wireless LAN 802.11 devices/Bluetooth devices/Short range devices Airline travel notice Use of electronic equipment aboard commercial aircraft is at the discretion of the airline. User-replaceable battery notices When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP website at http://www.hp.com/

recycle. For information about removing a user-replaceable battery, refer to the user guide included with the product. 8 Chapter 1 Regulatory notices Factory-sealed battery notices The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in accordance with IEC/EN 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007. Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. Factory-sealed battery notices 9 Modem notices U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-

distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. 10 Chapter 1 Regulatory notices U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

Modem notices 11 Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japan modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the LSI Corporation PCI-SV92EX Soft modem is below:

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

12 Chapter 1 Regulatory notices a. b. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Macrovision Corporation notice 13 2 Safety notices Important safety information WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product. The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving it. Install the computer near an AC outlet. The AC power cord is your computers main AC disconnecting device and must be easily accessible at all times. If the power cord provided with your computer has a grounded plug, always use the power cord with a properly grounded AC outlet to avoid the risk of electric shock. To reduce the possibility of an electric shock from the telephone network, plug your computer into the AC outlet before connecting it to the telephone line. Also, disconnect the telephone line before unplugging your computer from the AC power outlet. Always disconnect the modem cord from the telephone system before installing or removing your computer cover. Do not operate the computer with the cover removed. For your safety, always unplug the computer from its power source and from any telecommunications systems (such as telephone lines), networks, or modems before performing any service procedures. Failure to do so may result in personal injury or equipment damage. Hazardous voltage levels are inside the power supply and modem of this product. As a safety precaution, if the system power load exceeds the specific configurations capacities, the system may temporarily disable some USB ports. WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS. IMPORTANT:

If your computer is provided with a voltage select switch for use in a 115 or 230 V power system, the voltage select switch has been pre-set to the correct voltage setting for use in the particular country/region where it was initially sold. Changing the voltage select switch to the incorrect position can damage your computer and void any implied warranty. 14 Chapter 2 Safety notices This product has not been evaluated for connection to an IT power system (an AC distribution system with no direct connection to earth, according to applicable safety standards). Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the mobile computer, do not place the mobile computer directly on your lap or obstruct the computer air vents. Use the mobile computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The mobile computer and the AC adapter comply with the user-accessible surface temperature limits defined by applicable safety standards. Potential safety conditions notice If you notice any of the following conditions (or if you have other safety concerns), do not use the computer:

crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer. It is normal for these conditions to appear when an internal electronic component fails in a safe and controlled manner. However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact technical support for assistance. Installation conditions See installation instructions before connecting this equipment to the input supply. WARNING! Energized and moving parts may be inside the computer. Disconnect power to the equipment before removing the enclosure. Replace and secure the enclosure before re-energizing the equipment. Acoustics notice Battery notices Sound pressure level (LpA) is far below 70dB(A) (operator position, normal operation, according to ISO 7779). To display product noise emission data, go to IT ECO Declarations at http://www.hp.com/go/ted, and then select a product category from the drop-down menu. WARNING! The product may contain an internal lithium manganese dioxide, vanadium pentoxide, or alkaline battery or battery pack. There is risk of fire and burns if the battery pack is not handled properly. WARNING! Do not attempt to recharge the battery. WARNING! Do not expose to temperatures higher than 60 C (140 F). WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. Fast charging may not be available for non-compatible or non-HP batteries. WARNING! To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING! Replace only with the HP spare designated for this product. Heat-related safety warning notice 15 WARNING! Do not ingest battery, a Chemical Burn Hazard. WARNING! This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. WARNING! Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away WARNING!

from children. WARNING!

immediate medical attention. If you think batteries might have been swallowed or placed inside any part of the body, seek WARNING!

explosion or the leakage of flammable liquid or gas. Leaving a battery in an extremely high temperature surrounding environment can result in an WARNING! A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Icon Description Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. In order to forward them to recycling or proper disposal, please use the public collection system or return them to HP, an authorized HP partner, or their agents. Fan notices WARNING!

Keep body parts away from moving parts. WARNING! Keep body parts away from fan blades. WARNING! Keep body parts out of the motion path. Headset and earphone volume level notice WARNING!

To prevent possible hearing damage, do not listen at high volume levels for long periods. Adjustment of the volume control as well as the equalizer to other settings than the center position may increase the ear-/headphones output voltage and therefore the sound pressure level. The use of factors influencing the ear-/headphones output other than those specified by the manufacturer (e.g. operating system, equalizer software, firmware, driver) may increase the ear-/headphones output voltage and therefore the sound pressure level. Laser safety For products equipped with optical drives or fiber optic transceivers. This product may be provided with an optical storage device (i.e., CD or DVD drive) and/or fiber optic transceiver. These contain lasers and are classified as Class 1 Laser Products in accordance with the standard IEC/EN 60825-1 and comply with its requirements. Each laser product complies with US FDA Regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. 16 Chapter 2 Safety notices WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the laser products installation guide may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein. Allow only HP Authorized Service technicians to repair the unit. Power supply and power cord set requirements Power supply class I grounding requirements For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the system power cord into an AC outlet that provides a ground connection. Substitute cords may not provide adequate fault protection. Only use the power cord supplied with this product or an HP Inc. authorized replacement. Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia eltrica que possua aterramento (trs pinos), conforme a norma nbr abnt 5410,visando a segurana dos usurios contra choques eltricos. Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. Laite on liitettv suojakoskettimilla varustettuun pistorasiaan. Brazil notice Denmark Finland Norway Sweden Apparatet m tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Power supply requirements The power supplies on some products have external power switches. The voltage select switch feature on the product permits it to operate from any line voltage between 100-127 or 200-240 volts AC. Power supplies on those products that do not have external power switches are equipped with internal circuits that sense the incoming voltage and automatically switch to the proper voltage. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. For use in Norway This product is also designed for an IT power system with phase-to-phase voltage 230V. Power supply and power cord set requirements 17 Power cord set requirements 1. 2. WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet. If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. The power cord set received with the product meets the requirements for use in the country where the equipment was originally purchased. Use only the power cord provided with the unit or an authorized replacement power cord from HP Inc. or an approved HP Inc. source. Replacement part numbers may be found at http://www.hp.com/support. Power cord sets for use in other countries must meet the requirements of the country where you use the product. For more information on power cord set requirements, contact your authorized HP dealer, reseller, or service provider. WARNING! Do not use power cords from other products. Mismatched power cords may result in a shock and fire hazard. The requirements listed below are applicable to all countries:

The power cord must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be installed. The length of the power cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). For a power cord 2.0 m

(6.56 feet) or less, the diameter of the wire must be a minimum of 0.75 mm2 or 18AWG. If the power cord is longer than 2.0 m (6.56 feet), the diameter of the wire must be a minimum of 1.0 mm2 or 16AWG. The power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. WARNING! Do not operate this product with a damaged power cord set. If the power cord set is damaged in any manner, replace it immediately. Damaged cords may result in user exposure to hazards. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/

18AWG, and the length of the cord must be between 1.0 m (3.2 ft) and 2 m (6.56 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. DC plug of external HP power supply 18 Chapter 2 Safety notices Japan power cord notice Japan power cord requirements For use in Japan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. Pinch hazard WARNING! Observe pinch hazard areas. Keep fingers away from closing parts. TV antenna connectors protection External television antenna grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is electrically grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper electrical grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-

discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Lightning protection For added protection of any product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug the product from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product from lightning and power line surges. Table 2-1 Antenna Grounding Reference Grounding Component 1 Electric Service Equipment Pinch hazard 19 Table 2-1 Antenna Grounding (continued) Reference Grounding Component 2 3 4 5 6 7 Power Service Grounding Electrode System (NEC Art 250, Part III) Ground Clamps Grounding Conductors (NEC Section 810.21) Antenna Discharge Unit (NEC Section 810.20) Ground Clamp Antenna Lead-in Wire Note to CATV system installer This reminder is provided to call the CATV systems installers attention to section 820.93 of the National Electric Code, which provides guidelines for proper grounding and in particular, specify that the Coaxial cable shield shall be connected to grounding system of the building, as close to the point of cable entry as practical. Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. 20 Chapter 2 Safety notices China safety notices China: Altitude notice 2000m Icon Description 2000m China: Tropical warning notice Icon Description China safety notices 21 Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system.

(1) 30 10

(2) 2 2 1 22 Chapter 2 Safety notices 3 Environmental notices This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware, packaging and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle. For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/. Disposal of waste equipment by users Icon Description This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/recycle. Brazil alkaline battery disposal Icon Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar No descarte o produto eletrnico em lixo comum Brazil hardware recycling information Icon Description Este produto eletroeletrnico e seus componentes no daven ser descartados no lixo comum, pois embora estejam em conformidade com padres mundiais de restrio a substncias nocivas, podem conter, ainda que em quantidades mnimas, substncias impactantes ao meio ambiente. Ao final da vida til deste produto, o usurio dever entreg-lo HP. A no observncia dessa orientao sujeitar o infrator s sanes previstas em lei. Aps o uso, as pilhas e/ou baterias dos produtos HP devero ser entregues ao estabelecimento comercial ou rede de assistncia tcnica autorizada pela HP. Para maiores informaes , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/reciclar No descarte o produto eletrnico em lixo comum Electronic hardware, packaging and battery recycling 23 Taiwan battery recycling information Icon Description The Taiwan EPA requires dry battery manufacturing or importing firms, in accordance with Article 15 of the Waste Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or promotions. Contact a qualified Taiwanese recycler for proper battery disposal. ENERGY STAR Certification (select products only) ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps businesses and individuals save money and protect our climate through superior energy efficiency. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency criteria or requirements set by the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, HP Inc. has followed the U.S. EPAs enhanced product certification process to ensure that products marked with the ENERGY STAR logo are ENERGY STAR certified per the applicable ENERGY STAR guidelines. The following logo appears on all ENERGY STAR-certified computers:

A key ENERGY STAR requirement for computer products is power management features that significantly reduce energy consumption when the product is not in use. Power management allows a computer to automatically enter a low power sleep mode, or other low power mode, after a defined period of inactivity. The power management features have been preset as follows when the computer is operating on AC power:

Computer type Time to activate display sleep mode Time to activate computer sleep mode (minutes) Resuming from sleep mode Notebooks, Mobile Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Tablets/Slates Less than or equal to 1 minute Not applicable Not applicable Desktops, Integrated Desktops, Workstations Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes (varies by model) Product will exit sleep mode when the power/sleep button is pressed. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. Product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. When sleep mode is supported by operating system product will exit sleep mode when user interacts with any input device, including the mouse or keyboard. Thin clients Less than or equal to 15 minutes (varies by model) Less than or equal to 30 minutes when sleep mode is supported by the operating system (varies by model) 24 Chapter 3 Environmental notices Computer type Time to activate display sleep mode Time to activate computer sleep mode (minutes) Resuming from sleep mode If Wake-on-Lan (WOL) is enabled, the system can resume from sleep in response to a network signal. For computers that support an always-on, always-connected use profile where internet access is available

(such as tablets and slates), alternative low power modes - such as Short or Long Idle modes (as defined in the ENERGY STAR Computer Program Requirements) are provided that consume very little power (</= 10 Watts) and when applicable, maximize product battery life. These alternative low power modes are dynamic, with the display sleep mode activated within 1 minute of user inactivity. The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management website at http://www.energystar.gov/

powermanagement. Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR website at http://www.energystar.gov. ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. Chemical substances Mercury statement HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No. 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. This statement applies to all-in-one computers with built-in display panels that do not use LED backlighting. This HP product may contain the following material that might require special handling at end-of-life:

Mercury in the fluorescent lamp in the display LCD Disposal of mercury can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA)

(http://www.eiae.org). Perchlorate materialspecial handling may apply The computers real-time clock battery may contain perchlorate and may require special handling when recycled or disposed of in California. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/. Chemical substances 25 China environmental notices China PC energy label In accordance with The Regulation of the Implementation on China Energy Label for Microcomputers, this microcomputer has an Energy Efficiency Label. The energy efficiency grade, TEC (Typical Energy Consumption), and product category presented on the label are determined and calculated according to the standard GB28380-2012. 1. Energy Efficiency Grades The grade is determined by the standard with the calculation of base consumption level with the sum of all the allowances for additional components such as main memory and graphics card. For products of any grade, the TEC should not exceed the value specified in the following table:

Product Type TEC (kilowatt hour) Desktop microcomputer, AIO Category A 98.0+Efa 148.0+Efa 198.0+Efa Grade 1 Grade 2 Grade 3 Category B 125.0+Efa 175.0+Efa 225.0+Efa Category C 159.0+Efa 209.0+Efa 259.0+Efa Category D 184.0+Efa 234.0+Efa 284.0+Efa Portable Computer Category A 20.0+Efa 35.0+Efa 45.0+Efa Category B 26.0+Efa 45.0+Efa 65.0+Efa Category C 54.5+Efa 75.0+Efa 123.5+Efa NOTE: Efa is the sum of power factor of product additional functions. 2. Typical Energy Consumption The energy consumption figure presented on the label is the data measured with the representative configuration that covers all the configurations in the registration unit which is selected according to The Regulation of the Implementation on China Energy Label for Microcomputers". Thus, actual energy consumption of this specific microcomputer may not be the same as the TEC data presented in the label. 3. Product Category The product category is determined by the standard according to the microcomputers configuration. The categorization of products complies with the regulations in the following table:

Product Type Configuration Description Desktop microcomputer, AIO Portable Computer 26 Chapter 3 Environmental notices Product Type Category A Category B Category C Configuration Description The desktop microcomputer and AIO whose configuration is out of the scope of Category B, C, and D The portable computer whose configuration is out of the scope of Category B and C CPU physical core number of 2, and system memory of not less than 2 GB A Discrete GPU CPU physical core number of over 2, with at least one of the following features:

System memory of not less than 2 GB The product that has a CPU physical core number of not less than 2, system memory of not less than 2GB, A Discrete GPU with Frame Buffer Width not less than 128-bit. A Discrete GPU 1. 2. 1. 2. Category D CPU physical core number of not less than 4, with at least one of the following features:

System memory of not less than 4 GB A Discrete GPU with Frame Buffer Width not less than 128-bit For more details on the specification, please refer to the standard GB28380-2012. China PC energy label 27 28 Chapter 3 Environmental notices China restriction of hazardous substances (RoHS) for notebook and tablet computers The Table of Hazardous Substances/Elements and their Content As required by Chinas Management Methods for Restricted Use of Hazardous Substances in Electrical and Electronic Products Part Name Lead (Pb)

(Hg)

(Cd) Mercury Cadmium Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Hazardous Substances Battery Cables Camera Chassis/Other Flash memory card reader Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power pack Power supply Remote control Smart card/Java card reader Speakers, external X X X X X X X X X X X O X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O China restriction of hazardous substances (RoHS) for notebook and tablet computers 29 Hazardous Substances Mercury Cadmium Lead (Pb)

(Hg)

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) This form has been prepared in compliance with the provisions of SJ/T 11364. O: Indicates that the content of said hazardous substance in all of the homogenous materials in the component is within the limits required by GB/T 26572. X: Indicates that the content of said hazardous substance exceeds the limits required by GB/T 26572 in at least one homogenous material in the component. All parts named in this table with an X are in compliance with the European Unions RoHS Legislation. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

(Cr(VI)) Part Name TV tuner USB flash memory drive USB hub Web camera Wireless receiver Wireless cards

I/O PCA

(LCD) CD/DVD/

X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 30 Chapter 3 Environmental notices

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

/Java USB USB X X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O

(Cr(VI)) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 O O O O O O O O O O O O O O O O O O China restriction of hazard substances (ROHS) for desktops, thin clients, personal workstations, all-in-ones, and point-of-sale terminals The Table of Hazardous Substances/Elements and their Content As required by Chinas Management Methods for Restricted Use of Hazardous Substances in Electrical and Electronic Products China restriction of hazard substances (ROHS) for desktops, thin clients, personal workstations, all-in-

ones, and point-of-sale terminals 31 Hazardous Substances Part Name Lead (Pb)

(Hg)

(Cd) Mercury Cadmium Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Flash memory card reader Battery Cables Camera Chassis/Other Fan Floppy disk drive Hard disk drive Headphones Heat sink I/O PCAs Keyboard Liquid crystal display

(LCD) panel Media (CD/DVD/floppy) Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Projector Remote control Smart card/Java card reader Solid-state drives Speakers, external Stylus Touch mat TV tuner USB flash memory drive X X X X X X X X X X X X X O X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 32 Chapter 3 Environmental notices Hazardous Substances Mercury Cadmium Lead (Pb)

(Hg)

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Part Name USB hub Web camera Wireless receiver Wireless cards 3D Capture Stage/

Turntable

I/O PCA This form has been prepared in compliance with the provisions of SJ/T 11364. O: Indicates that the content of said hazardous substance in all of the homogenous materials in the component is within the limits required by GB/T 26572. X: Indicates that the content of said hazardous substance exceeds the limits required by GB/T 26572 in at least one homogenous material in the component. All parts named in this table with an X are in compliance with the European Unions RoHS Legislation. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.

(ROHS)

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

(Cr(VI)) X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O

(ROHS) 33

(Pb)

(Hg)

(Cd)

(PBB)

(PBDE)

(Cr(VI))

(LCD) CD/DVD/

/Java USB USB 3D /

X X O X X X X X X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T 11364 O GB/T 26572 X GB/T 26572 O O O O O O O O O O O O O O O O O O O O O O O O 34 Chapter 3 Environmental notices

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Unit Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent chromium (Cr+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Cables

Chassis/Other

I/O PCAs

(LCD) Liquid crystal display (LCD) panel Memory Motherboard, processor, heat sinks Power pack Power supply Storage Devices Wireless Devices 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption.

(RoHS) 35 http://www.hp.com/support To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides.

(RoHS) Declaration of the Presence Condition of the Restricted Substances Marking Restricted substances and its chemical symbols Lead Mercury Cadmium

(Pb)

(Hg)

(Cd) Hexavalent chromium (Cr

+6) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) Unit Cables

/ Chassis/Other

I/O PCAs

(LCD) Liquid crystal display

(LCD) panel (for AIO only) Memory Motherboard, processor, heat sinks Power supply Storage Devices 1 0.1 % 0.01 %

Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2 Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3 Note 3: The "" indicates that the restricted substance corresponds to the exemption. http://www.hp.com/support To access the latest user guides, go to http://www.hp.com/support, and follow the instructions to find your product. Then select User Guides. 36 Chapter 3 Environmental notices India restriction of hazardous substances (RoHS) This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the "India E-waste Rule 2016." It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except where allowed pursuant to the exemptions set in Schedule 2 of the Rule. Information for European Union Commission Regulation 1275/2008 To locate product power consumption data, including when the product is in networked standby with all wired network ports connected and wireless devices connected, refer to section P14 Additional information of the product IT ECO Declaration at http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/

itecodesktop-pc.html. Where applicable, activate and deactivate a wireless network using the instructions included in the product user guide or the operating system. Information is also available at http://www.hp.com/support. IT ECO declarations Notebook or tablet PCs http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/iteconotebook-o.html Desktop PCs and Thin Clients Workstations http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?

jumpid=reg_R1002_USEN http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html Japan restriction of hazardous substances (RoHS) A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. India restriction of hazardous substances (RoHS) 37 Ley para el Aprovechamiento Sustentable de la Energa de Mxico Ley para el Aprovechamiento Sustentable de la Energa de Mxico Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energa de Mxico, que requiere la divulgacin del consumo de energa del modo de uso normal (modo inactivo) y del modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energa del modo inactivo de su configuracin especfica puede diferir de la informacin de la etiqueta. El consumo real de energa de su producto puede ser mayor o menor que el valor informado en la etiqueta de energa de producto para Mxico a causa de factores como la configuracin (componentes y mdulos seleccionados) y el uso (tareas que se estn efectuando, software instalado y en ejecucin, etc.). NOTE: Esta ley no es aplicable a las estaciones de trabajo. Turkey WEEE regulation Trkiye Cumhuriyeti: AEEE Ynetmeliine Uygundur 38 Chapter 3 Environmental notices TCO Certified This section applies only to products bearing the TCO Certified logo. TCO Certified 39 TCO Certified Edge This section applies only to products bearing the TCO Certified Edge logo. 40 Chapter 3 Environmental notices Symbols/Numerics 35, 36 Federal Communications Commission notices notebook computers cables 2 notebook computers modifications 2 35, 36 notebook computers notice 1 Index A airline travel notice 8 altitude notice 21 B battery 15 battery notice 8, 9, 23 battery recycling 23 Belarus regulatory notice 3 Brazil notice 3, 17 C cable grounding notice 22 Canada modem statement 12 Canada notices 3 China environmental notices 26 China PC energy label 26 China restriction of hazardous substances notice 29, 31 D disposal notices battery 23 battery, user replacement 8 equipment 23 factory sealed battery 9 E electronic hardware and battery recycling 23 ENERGY STAR certification 24 environmental notices 23 equipment disposal notice 23 ergonomics notice 5 European Union Commission Regulation 1275/2008 37 F fan notice 16 G GS Notice 5 H headset and earphone volume level notice 16 I India restriction of hazardous substances notice 37 J Japan modem statement 12 Japan notice 6 Japan power cord notice 19 Japan restriction of hazardous substances notice 37 L labels, regulatory 1 laser safety notice 9, 16 M Macrovision Corporation notice 13 maximum power levels 4 Mexico wireless notice 6 modem notices 10 modem statements Canada 12 Japan 12 New Zealand 12 U.S. 10, 11 modifications, notebook computers Federal Communications Commission 2 N New Zealand modem statement 12 airline travel 8 battery 8, 9, 15, 23 Belarus regulatory 3 Brazil 3, 17 Canada 3 China restriction of hazardous substances 29, 31 environmental 23 equipment disposal 23 ergonomics 5 fan 16 headset and earphone volume level 16 India restriction of hazardous substances 37 Japan 6 Japan power cord 19 Japan restriction of hazardous substances 37 laser safety 9, 16 Macrovision Corporation 13 Mexico 6 modem 10 perchlorate material 25 power cords 18 Singapore 7 South Korea 7 Taiwan 8 Thailand wireless notice 7 travel 20 notices, notebook computers Federal Communications Commission 1 P power cord notice 18 R radio frequency bands 4 recycling, electronic hardware and battery 23 S Singapore wireless notice 7 Index 41 South Korea notice 7 T Taiwan notice 8 TCO Certified Certification 39 TCO Certified Edge Certification 40 Thailand wireless notice 7 travel notice 20 tropical warning notice 21 TV tuner, cable grounding notice 22 U U.S. modem statement 10, 11 V voice support 13 volume level notice, headset and earphone 16 W wireless LAN devices 2 42 Index

Label information ModelHSN-C11C 1. Images of the e-label screen are provided below:

FCC ID: B94HNC11CPD Contains IC: 21374-L850GL Contains FCC ID:PD9AX201D2 Contains IC:1000M-AX201D2 2. The information that will be displayed on the e-label and information that will remain in the user manual is shown below:

FCC ID/IC number Information on E-label In Manual Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.) Class A / B Digital Device user manual statements1 Yes No No Yes No Yes 3. Users are able to access the information in no more than three steps in a devices menu. The actual Steps are: Choose esc or F10 > Advanced > Electronic Labels No special access codes or permissions are required to go through the above steps beyond entering a user-defined password to protect against unauthorized access to the device. 4. The information is stored on the device, no special accessories or supplemental plug-ins

(e.g., a SIM/USIM card) are required to access the information. No. 5. Users are provided specific instructions on how to access the information. The above information must be programmed by the responsible party and the information must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the manufacturer. The user cannot modify the e-label Yes. 6. information. 7. When e-labeling is used, a physical temporary label is also required on the product, or a label on the packaging, at the time of importation, marketing, and sales. The physical label will be on the packaging box.

American Certification Body 6731 Whittier Avenue Suite C110 McLean, VA 22101 USA Date: 02/15/2021 Ref: KDB 996369 D02 Module Q and A v01 Dear Examiner, This letter will attest that the FCC guidance in KDB 996369 D02 Module Q and A v01 for integrating modular transmitters into host equipment was followed for the preparation of this application under FCC ID: B94HNC11CPD The equipment will include two previously authorized transmitter modules as described below and will re-use previous conducted/radiated spurious emissions from those modules original approval. Original Intel FCC ID: PD9AX201D2, originally granted on 11/20/2018; Conducted/RF test reports 180717-03.TR01 thru TR06. FCC ID: ZMOL850GL, granted 03/10/2017; test report RF170106C02. This is a PCS licensed transmitter LTE module authorized as single modular approval to Fibocomm Wireless. Conducted/RF test reports RF170106C02-1 thru 6. Antenna specifications for these modules are included within this filing. These modules are used in accordance with the original module approval conditions and therefore re-use of conducted/radiated spurious emissions is justified according to KDB 996369D02 Module Q and A v01 WLAN/BT Module LTE Module Sincerely, Steven C. Hackett Sr Regulatory Engineer, Intel Corporation acting as agent on behalf of HP Inc. 3390 East Harmony Road, Fort Collins, CO 80528 USA

Date: 2021-01-05 FCC ID: B94HNC11CPD To Whom It May Concern:

AUTHORIZATION LETTER HP Inc. hereby authorizes Intel Corporation France S.A.S WRF Lab, to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Intel Corporation France S.A.S WRF Lab on HP Inc.s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours, _________________________________________ Liang Rong Chiao/ Worldwide Technical Regulations HP Inc. Tel: +886-2-37892469 E-mail: frances.liang@hp.com

May 19, 2021 Subject: Confidentiality Request for FCC ID: PD9AX201D2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Permanent Permanent X Exhibit Operation Description/Antenna Specification Test Setup Photos / Internal Photos Users Manual Intel Mobile Communications has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition"

would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

(Signature/Title1) Steven C. Hackett ________________________

(Print Name)

Date: 2021-01-06 IC: 21374-L850GL AGENCY AUTHORIZATION LETTER To whom it may concern:

Fibocom Wireless Inc. hereby authorizes Intel Mobile Communications France S.A.S WRF Lab, to act on its behalf in all matters relating to the Innovation, Science and Economic Development Canada

(ISED) application for equipment authorization in connection with the IC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Intel Mobile Communications France S.A.S WRF Lab behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours, _________________________________________ Lucy Liu Fibocom Wireless Inc. E-mail: lucy.liu@fibocom.com

*A++<+

%&()#*$+,-./)-011

++*+-&&$#.$!#!/0/#0/0

12 34/50 Details: The module contains a metal shield which covers all RF components and circuitry. The shield is located on the top of the board next to antenna connector. See photo provided with this filing.

!$ %&&*6/+&0

$#.$!#!/0/#0/0

12 34/50 Details: Data to the modulation circuit is buffered as described in the operational description provided with the application>

7$ %&&)&$%&

)++&+&+&&$#.$!#!/0/#0/0

12 34/50 Details: The module contains its own power supply regulation. Please refer to operational description filed with this application 8$ %&+&&99

#.$!"7:#.$!"8/*0:#.$!"8/+0:#.$!#!/0:!$!/*0$%&&*

:+)&+*0$%&;;<<9#.$!"7+*

*+)&#.$!#!/*0$#.$!#!/0/#0/0

12 34/50 Details: The module connects to its antenna using an UFL connector which is considered a non-standard connector. The antenna and connector specification are provided with this filing. $ %&*+):$$:&*

+#.$!">$6++

#.$!>/00$%&)&&&*)&++:&)&?:

&*++*/+#.$7#/00$#.$!#!/0/#0/0

12

34/50 Details: The module was tested in OEM host PC and is limited to installation in the host described in this filing.

BC*+>D8>8D0$

+&&)E%(, 1F42#GE(, 1F42#$G)&-&)*$%&H

&I::+)&&&+&-&

&I$

)+&&)E(+/0$G)

&I$#.$!#!/0/#0/0

12 34/50 Details: There is a label on the module as shown in the labeling exhibit filed with this application. Host specific labeling instructions are shown in the installation manual .filed with this application.

&+*+&+&I$(-:

&I+#.$!7#$(+:&*:-+

+#.$!7#/0:&+&+&)&)

$+&&*$#.$!#!/0/#0/0

12 34/50 Details: The module complies with FCC Part 15C requirements. Instructions to the OEM installer are provided in the installation manual filed with this application. D$ %&+&+*(-$(-:

(+!$#"#:!$#"7+++#.:+)#.$7#/0:#.$8">/0:

#.$!.7/0#.$!../)0:&=+:=3,,+

(2-++$,:

+)+#.$!8>(2-++

+++&+#.$!8>/*0/80$&+

#.:&+:+(2-++:+*)

++$#.$!#!/0/#0/0

12 34/50 Details: The module meets mobile/portable conditions levels as shown in the RF exposure test report filed with this application.

.2-/ 5 ,34%&*D:&+/0$

%&/0&&)&&++

&&+:+&&++&+$%&)+/0&J

+:&+&&*:**&+6+:+&&++&

Details: The module was tested in the OEM host PC and is limited to installation in the PC described in this application. 304. 56"74.66""#)-01"/$

+&+JBC

*+.8!D"$

36 Details: The firmware of the device cannot be modified or adjusted by the end user as described in a separate cover letter filed with this application.

!$ (/0+:+

++JBC*+88!D#!$

36 Details: <example N/A>

3

&+J:+&)&+

36 Details: <example N/A >

)8%194.55:;:5.7;3"

3%./1-,,

-<1--!

&K

12

3:

,3::&+++&

?&)*+$L&

%/-34.55:;:5.7;,3"

=,"75,--01/-!

---1=0--=/!

>1(/+!=10

-,-=/-01

#$ +*($BC@7@"7:+!$!

$ 4&$

!$ I&+++$BC@7@"7:+!$7

$ +&:+*:+ 7$ +$BC@7@"7:+!$8

*$ M&(-+:&+*+&

&++:+&,,&:+$ 8$ %+)$BC@7@"7:+!$.

.$ (-+$BC@7@"7:+!$@

+/*:*N--+*0+-*

@$ $BC@7@"7:+!$>

/:,(::+N&E+G+0

>$ *++$BC@7@"7:+!$D

$ +&)&&&+*) E(,E&&&+

D$

,)$BC@7@"7:+!$

$ ):#.*C+$BC@7@"7:+!$#"

&,) H/=0(

/0

C

$)2)

L+?

/)6%#0

/0

#*)*+++)+&(:*&&I)

American Certification Body 6731 Whittier Avenue Suite C110 McLean, VA 22101 USA Date: 05/19/2021 Ref: Application for Original Equipment Authorization for FCC ID: B94HNC11CPD. Dear Examiner, This is to request FCC Class II Permissive Change under FCC ID: B94HNC11CPD, originally issued 3/09/2021. It is our intention to apply the PAG re-use process for granting approvals. The full PAG review was previously performed under KDB 498903. We believe this application meets the conditions for PAG re-use as it is a special rf exposure compliance condition. The exact same WWAN authorized modules are re-used in this PC with the exact same algorithm and validation methods for time averaging SAR as approved in KDB 498903. Sincerely, Steven C. Hackett Sr Regulatory Engineer, Intel Corporation acting as agent on behalf of HP Inc. 3390 East Harmony Road, Fort Collins, CO

Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Date : 05/19/2021 Dear Examiner, Ref: FCC Class II Permissive change for FCC ID: PD9AX201D2 This is to request a Class II permissive change for module approval FCC ID: PD9AX201D2, originally granted on 11/20/2018. Change #1: This change establishes portable category SAR conditions for the HP model HSN-C11C PC with Inpaq WA-P-LTE15-02-001 (Tx1) and WA-P-LTE15-02-002 (Tx2) antennas. Sincerely, By:

Title:

e-mail:

__________________________ Steven C. Hackett Wireless Regulatory Engineer Agent On behalf of: HP Inc. steven.c.hackett@intel.com Intel Mobile Communications 100 Center Point Circle, Suite 200 Columbia, South Carolina 29210 USA

Regulatory WWAN Antenna Information Platform information Brand ODM HP Inc. Compal Platform model name McLaren

(HSN-C11C) Platform type (ex: regular NB, convertible PC, AIOetc) SAR minimum separation (mm) Tablet 1.95mm (to rear side in TB mode Antenna Part number

(TX1/Main) WA-P-LTE15-02-001

(DC330029D20) Antenna Part number

(Aux R2) WA-P-LTE15-02-002

(DC330029D30) 0.33 Peak gain w/ cable loss (dBi) 2500-2570MHz (Choice high peak gain) Form factor and suffixes ( NGW/ HMW AND AN/ NB/ BN.) Model Pandora Fibocom lt4210 LTE/HSPA+ w/GPS Intel XMM 7360 LTE-Advanced (M.2)- L850-GL Doc.No.:3.8.05 Rev 8.0 draft Antenna information Vendor Type INPAQ PIFA Module information Regulatory WWAN Antenna Information 1/86 Doc.No.:3.8.05 Rev 8.0 draft Antenna Sample / Antenna Data Requirements for worldwide regulatory approval n o i t c e S 2 3 4 5 6 7 8 Description of Required OEM / ODM Antenna Information 1A Part Number for Antenna only 1B Antenna Manufacturer Name 1C Description of Antenna Type US / IC EU Japan Taiwan Required Required Required Required Required Required Required Required Required Required Required N/A N/A N/A N/A S.Korea Part number of Antenna Assembly / cable impedance, length & diameter. 1D 1E Tx1, Tx2 & Tx3 antenna (Peak Gain W/ cable loss) *

1F Tx1, Tx2 & Tx3 antenna (Peak Gain only) *

1G VSWR of cable including connector 1H Tx1, Tx2 & Tx3 antenna (Cable loss W/ connector) *

1E OR 1F, 1G, 1H Required Desired Desired Desired Desired Required Required Required Required Required Required Required Required Required Required Required Required Required Required Required Required Required Required Required Required Dimensioned Photographs and Drawings of Tx1, Tx2, and Tx3 (or Rx3) antennas Radiation patterns of antennas loaded in the host platform. Platform model name / number - correlated to antenna manufacturer and antenna part number Photograph(s) or Drawings showing location of antennas in platform. (S. Korea requires photographs of antennas for approval submission). Taiwan requires pictures of each antenna type shown in the system. Mech. drawings / photos with dimensions of antenna locations and distance from end-user (For evaluation of SAR testing requirement). Photograph(s) or Drawings showing the location of all antennas (WLAN, other) and distance between those transmitting antennas. Information will be used to evaluate whether co-location testing is required. Required Required Required Required Required Required Desired Required N/A Required Required Required Desired Required Desired Required Required Desired Required

(Photos) Required

(Photos) Required N/A N/A N/A N/A Required N/A N/A N/A N/A Local representative contact information for LMA/

PARS process. Required N/A N/A N/A N/A Regulatory WWAN Antenna Information 2/86 Doc.No.:3.8.05 Rev 8.0 draft Antenna Information Section 1. Antenna Assembly Specifications 1D 1B 1A 1C Antenna Part Number Manufacture Antenna Type Cable Assembly Part Number and Information Peak Gain W/

Cable loss (dBi) Peak Gain w/o Cable Loss (dBi) VSWR Cable Loss (dBi) INPAQ PIFA 824-849MHz 824-849MHz 824-849MHz 824-849MHz 1E 1F 1G 1H Tx1 Antenna WA-P-LTE15-02-001

(DC330029D20) dBi (peak) -1.55 dBi (peak) 7.00 max 0.03

-1.58 880-915MHz 50 ohm Coaxial. length: 20 mm 880-915MHz 880-915MHz

-1.39 dBi (peak) -1.36 dBi (peak) 7.00 max 0.03 diameter: 1.13 Connector: 20565-001R-13 0.55 dBi (peak) 0.60 dBi (peak) 5.00 max 0.05 1710-1785MHz 1710-1785MHz mm 1710-1785MHz 1710-1785MHz dBi

(peak) 880-915MHz dBi

(peak) dBi

(peak) dBi

(peak) dBi

(peak) 704-716MHz dBi

(peak) 777-787MHz dBi

(peak) 832-862MHz dBi

(peak) dBi

(peak) dBi

(peak) 1850-1910MHz 1850-1910MHz 1850-1910MHz 1850-1910MHz

-0.73 dBi (peak) -0.68 dBi (peak) 5.00 max 0.05 1920-1980MHz 1920-1980MHz 0.57 dBi (peak) 0.62 dBi (peak) 5.00 max 0.05 704-716MHz 704-716MHz 704-716MHz 1920-1980MHz 1920-1980MHz

-2.06 dBi (peak) -2.03 dBi (peak) 7.00 max 0.03 746-756MHz 777-787MHz 777-787MHz

-1.17 dBi (peak) -1.14 dBi (peak) 7.00 max 0.03 777-787MHz 832-862MHz 832-862MHz

-0.67 dBi (peak) -0.64 dBi (peak) 7.00 max 0.03 832-862MHz 1710-1755MHz 1710-1755MHz 1710-1755MHz

-1.27 dBi (peak) -1.22 dBi (peak) 5.00 max 0.05 1710-1755MHz 2500-2570MHz 2500-2570MHz 2500-2570MHz 0.55 dBi (peak) 0.61 dBi (peak) 4.00 max 0.06 2500-2570MHz 2305-2315MHz 2305-2315MHz 2305-2315MHz 0.50 dBi (peak 0.56 dBi (peak 4.00 max 0.06 dBi

(peak) 2570-2620MHz 2570-2620MHz 2570-2620MHz

-0.05 dBi (peak 0.01 dBi (peak 4.00 max 0.06 dBi (peak 2300-2400MHz 2300-2400MHz 2300-2400MHz

-0.16 dBi (peak -0.10 dBi (peak 4.00 max 0.06 dBi (peak 2300-2400MHz 2570-2620MHz Rx2(Aux) Antenna WA-P-LTE15-02-002

(DC330029D30) INPAQ PIFA 869-894MHz 869-894MHz 869-894MHz 869-894MHz

-7.25 dBi (peak) -6.92 dBi (peak) 6.0 max 0.33 50 ohm Coaxial. length: 193 mm 925-960MHz 925-960MHz 925-960MHz

-8.49 dBi (peak) -8.11 dBi (peak) 6.0 max 0.38 dBi

(peak) 925-960MHz dBi

(peak) diameter: 1.13 1805-1880MHz Connector: 20565-001R-13 -2.63 dBi (peak) -2.13 dBi (peak) 1805-1880MHz mm 1805-1880MHz 1805-1880MHz 5.0 max 0.50 dBi

(peak) dBi

(peak) dBi

(peak) 1930-1990MHz 1930-1990MHz 1930-1990MHz 1930-1990MHz

-1.15 dBi (peak) -0.62 dBi (peak) 5.0 max 0.53 2110-2170MHz 2110-2170MHz 2110-2170MHz 2110-2170MHz

-2.02 dBi (peak) -1.47 dBi (peak) 5.0 max 0.55 734-746MHz 734-746MHz 734-746MHz

-5.91 dBi (peak) -5.60 dBi (peak) 6.0 max 0.31 746-756MHz 746-756MHz 746-756MHz

-5.48 dBi (peak) -5.16 dBi (peak) 6.0 max 0.32 734-746MHz dBi

(peak) 746-756MHz dBi

(peak) 791-821MHz 791-821MHz 791-821MHz 791-821MHz Regulatory WWAN Antenna Information 3/86 Doc.No.:3.8.05 Rev 8.0 draft Antenna Peak Gain required being test in system basis. 1E frame contend absolutely peak antenna gain include H/V

-5.98 dBi (peak) -5.65 dBi (peak) 6.0 max 0.33 2132-2155MHz 2110-2155MHz 2110-2155MHz 2110-2155MHz

-1.97 dBi (peak) -1.42 dBi (peak) 5.0 max 0.55 2620-2690MHz 2620-2690MHz 2620-2690MHz 2620-2690MHz

-5.73 dBi (peak) -5.11 dBi (peak) 4.0 max 0.62 2570-2620MHz 2570-2620MHz 2570-2620MHz 2570-2620MHz

-3.49 dBi (peak) -2.88 dBi (peak) 2300-2400MHz 2300-2400MHz 0.73 dBi (peak 1.31 dBi (peak 4.0 max 0.61 dBi

(peak) 2300-2400MHz 2300-2400MHz 4.0 max 0.58 dBi (peak dBi

(peak) dBi

(peak) dBi

(peak) Regulatory WWAN Antenna Information 4/86 Doc.No.:3.8.05 Rev 8.0 draft Antenna Peak Gain Table:

Frequency (MHz) Frequency (MHz) Main antenna Aux antenna 824 836 849 880 894 915 1710 1750 1785 1850 1880 1910 1920 1950 1980 704 710 716 746 751 756 777 782 787 832 847 862 1710 1732 1755 2500 2535 2570 2595 2620 2300 2350 2400 Horizontal

(dBi)

-3.42

-3.25

-2.91

-3.6

-4.18

-5.43

-0.29

-0.96

-3.13

-2.47

-2.99

-3.41

-3.38

-3.02

-2.77

-2.25

-2.16

-2.06

-1.66

-1.45

-1.17

-1.02

-1.31

-1.69

-3.32

-2.99

-2.9

-0.29

-0.35

-1.28 0.5

-0.61

-1.24

-0.05

-0.61

-1.24

-1.30

-1.50 Vertical

(dBi)

-2.07

-1.87

-1.58

-1.39

-1.8

-2.93 0.55 0.09

-1.67

-1.27

-1.22

-0.73

-0.38 0.57 0.5

-4.69

-4.17

-3.71

-2.04

-1.72

-1.39

-0.67

-0.74

-0.92

-1.92

-1.64

-1.27 0.55 0.49

-0.14 0.35

-0.31

-0.58

-1.64

-0.31

-0.58

-0.60

-0.16 869 880 894 925 940 960 1805 1840 1880 1930 1960 1990 2110 2140 2170 734 740 746 751 756 791 806 821 2132 2155 2620 2655 2690 2570 2595 2620 2300 2350 2400 Horizontal

(dBi)

-7.88

-8.35

-8.44

-8.49

-8.84

-9.15

-4.44

-4.72

-4.69

-4.75

-4.63

-4.57

-2.69

-2.02

-2.17

-5.91

-6.21

-6.13

-5.79

-5.48

-6.28

-6.74

-6.3

-2.14

-1.97

-5.73

-7.16

-7.55

-3.81

-4.46

-5.73 0.23 0.29

-2.44 Vertical

(dBi)

-7.25

-7.9

-8.68

-9.33

-9.13

-9.44

-2.69

-2.85

-2.63

-1.97

-1.15

-1.94

-2.27

-2.27

-2.77

-10.18

-10.13

-10.28

-10.42

-10.37

-8.04

-6.93

-5.98

-2.21

-2.47

-5.98

-9.37

-9.67

-3.49

-4.45

-5.98 0.73 0.15

-0.46 Regulatory WWAN Antenna Information 5/86 Doc.No.:3.8.05 Rev 8.0 draft Section 2. Dimensioned Photos or Drawings of Antennas Include a dimensioned photo and dimensioned drawing of Tx1 antenna here. Tx1 Antenna Dimensioned Drawing:

Tx1 Antenna Photo:

TX1 TX1 Regulatory WWAN Antenna Information 6/86 Doc.No.:3.8.05 Rev 8.0 draft Include a dimensioned photo and dimensioned drawing of Tx2 (or Rx2) antenna here. Tx2 (or Rx2) Antenna Dimensioned Drawing:

Tx2 (or Rx2) Antenna Photo:

TX2 TX2 Regulatory WWAN Antenna Information 7/86 Doc.No.:3.8.05 Rev 8.0 draft Include front view photo of all 2 antennas here. Antenna Manufacturer: INPAQ Technology Corporation AntennaPartNumber: WA-P-LTE15-02-001 (DC330029D20)(Tx1), WA-P-LTE15-02-002 (DC330029D30)

(Tx2 or Rx2) TX1 TX2 Include back view photo of all 3 antennas here. Antenna Manufacturer: INPAQ Technology Corporation Antenna Part Number: WA-P-LTE15-02-001 (DC330029D20)(Tx1), WA-P-LTE15-02-002 (DC330029D30)

(Tx2 or Rx2) TX2 TX1 Regulatory WWAN Antenna Information 8/86 Doc.No.:3.8.05 Rev 8.0 draft Section3. Radiation characteristics of antennae Loaded in Host Platform 824-849MHz radiation characteristic Tx1 antenna: 824 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 824 MHz

-3.42

-2.07 Regulatory WWAN Antenna Information 9/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 836 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 836 MHz

-3.25

-1.87 Regulatory WWAN Antenna Information 10/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 849 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 849 MHz

-2.91

-1.58 Regulatory WWAN Antenna Information 11/86 Doc.No.:3.8.05 Rev 8.0 draft 880-915MHz radiation characteristic Tx1 antenna: 880 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 880 MHz

-3.60

-1.39 Regulatory WWAN Antenna Information 12/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 894 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 894 MHz

-4.18

-1.80 Regulatory WWAN Antenna Information 13/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 915 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 915 MHz

-5.43

-2.93 Regulatory WWAN Antenna Information 14/86 Doc.No.:3.8.05 Rev 8.0 draft 1710-1785MHz radiation characteristic Tx1 antenna: 1710 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1710MHz

-0.29 0.55 Regulatory WWAN Antenna Information 15/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 1750 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1750 MHz

-0.96 0.09 Regulatory WWAN Antenna Information 16/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 1785 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1785MHz

-3.13

-1.67 Regulatory WWAN Antenna Information 17/86 Doc.No.:3.8.05 Rev 8.0 draft 1850-1910MHz radiation characteristic Tx1 antenna: 1850 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1850 MHz

-2.47

-1.27 H+V Horizontal Vertical H+V Horizontal Vertical Regulatory WWAN Antenna Information 18/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 1880 MHz 1880 MHz

-2.99

-1.22 Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Regulatory WWAN Antenna Information 19/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 1910 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1910 MHz

-3.41

-0.73 Regulatory WWAN Antenna Information 20/86 Doc.No.:3.8.05 Rev 8.0 draft 1920-1980MHz radiation characteristic Tx1 antenna: 1920 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1920 MHz

-3.38

-0.38 Regulatory WWAN Antenna Information 21/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 1950 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1950 MHz

-3.02 0.57 Regulatory WWAN Antenna Information 22/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 1980 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1980 MHz

-2.77 0.50 Regulatory WWAN Antenna Information 23/86 Doc.No.:3.8.05 Rev 8.0 draft 704-716MHz radiation characteristic Tx1 antenna: 704 MHz 704 MHz

-2.25

-4.69 Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Regulatory WWAN Antenna Information 24/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 710 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 710 MHz

-2.16

-4.17 Regulatory WWAN Antenna Information 25/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 716 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 716 MHz

-2.06

-3.71 Regulatory WWAN Antenna Information 26/86 Doc.No.:3.8.05 Rev 8.0 draft 746-756MHz radiation characteristic Tx1 antenna: 746 MHz 746 MHz

-1.66

-2.04 Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Regulatory WWAN Antenna Information 27/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 751 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 751 MHz

-1.45

-1.72 Regulatory WWAN Antenna Information 28/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 756 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 756 MHz

-1.17

-1.39 Regulatory WWAN Antenna Information 29/86 Doc.No.:3.8.05 Rev 8.0 draft 777-787MHz radiation characteristic Tx1 antenna: 777 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 777 MHz

-1.02

-0.67 Regulatory WWAN Antenna Information 30/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 782 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 782 MHz

-1.31

-0.74 Regulatory WWAN Antenna Information 31/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 787 MHz 787 MHz

-1.69

-0.92 Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Regulatory WWAN Antenna Information 32/86 Doc.No.:3.8.05 Rev 8.0 draft 832-862MHz radiation characteristic Tx1 antenna: 832 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 832 MHz

-3.32

-1.92 Regulatory WWAN Antenna Information 33/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 847 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 847 MHz

-2.99

-1.64 Regulatory WWAN Antenna Information 34/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 862 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 862 MHz

-2.90

-1.27 Regulatory WWAN Antenna Information 35/86 Doc.No.:3.8.05 Rev 8.0 draft 1710-1755MHz radiation characteristic Tx1 antenna: 1710 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1710 MHz

-0.29 0.55 Regulatory WWAN Antenna Information 36/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 1732 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1732 MHz

-0.35 0.49 Regulatory WWAN Antenna Information 37/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 1755 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1755 MHz

-1.28

-0.14 Regulatory WWAN Antenna Information 38/86 Doc.No.:3.8.05 Rev 8.0 draft 2500-2570MHz radiation characteristic Tx1 antenna: 2500 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2500 MHz 0.50 0.35 Regulatory WWAN Antenna Information 39/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 2535 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2535 MHz

-0.61

-0.31 Regulatory WWAN Antenna Information 40/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 2570 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2570 MHz

-1.24

-0.58 Regulatory WWAN Antenna Information 41/86 Doc.No.:3.8.05 Rev 8.0 draft 2570-2620 MHz radiation characteristic Tx1 antenna: 2570 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2570 MHz

-1.24

-0.58 Regulatory WWAN Antenna Information 42/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 2595 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2595 MHz

-0.05

-1.64 Regulatory WWAN Antenna Information 43/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 2620 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2620 MHz

-0.61

-0.31 Regulatory WWAN Antenna Information 44/86 Doc.No.:3.8.05 Rev 8.0 draft 2300-2400 MHz radiation characteristic Tx1 antenna: 2300 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2300 MHz

-1.24

-0.58 Regulatory WWAN Antenna Information 45/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 2350 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2350 MHz

-1.30

-0.60 Regulatory WWAN Antenna Information 46/86 Doc.No.:3.8.05 Rev 8.0 draft Tx1 antenna: 2400 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2400 MHz

-1.50

-0.16 Regulatory WWAN Antenna Information 47/86 Doc.No.:3.8.05 Rev 8.0 draft 869-894MHz radiation characteristic Tx2 antenna: 869 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 869 MHz

-7.88

-7.25 Regulatory WWAN Antenna Information 48/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 880 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 880 MHz

-8.35

-7.90 Regulatory WWAN Antenna Information 49/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 894 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 894 MHz

-8.44

-8.68 Regulatory WWAN Antenna Information 50/86 Doc.No.:3.8.05 Rev 8.0 draft 925-960MHz radiation characteristic Tx2 antenna: 925 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 925 MHz

-8.49

-9.33 Regulatory WWAN Antenna Information 51/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 940 MHz 940 MHz

-8.84

-9.13 Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Regulatory WWAN Antenna Information 52/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 960 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 960 MHz

-9.15

-9.44 Regulatory WWAN Antenna Information 53/86 Doc.No.:3.8.05 Rev 8.0 draft 1805-1880MHz radiation characteristic Tx2 antenna: 1805 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1805 MHz

-4.44

-2.69 Regulatory WWAN Antenna Information 54/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 1840 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1840 MHz

-4.72

-2.85 Regulatory WWAN Antenna Information 55/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 1880 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1880 MHz

-4.69

-2.63 Regulatory WWAN Antenna Information 56/86 Doc.No.:3.8.05 Rev 8.0 draft 1930-1990MHz radiation characteristic Tx2 antenna: 1930 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1930 MHz

-4.75

-1.97 Regulatory WWAN Antenna Information 57/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 1960 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1960 MHz

-4.63

-1.15 Regulatory WWAN Antenna Information 58/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 1990 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 1990 MHz

-4.57

-1.94 Regulatory WWAN Antenna Information 59/86 Doc.No.:3.8.05 Rev 8.0 draft 2110-2170MHz radiation characteristic Tx2 antenna: 2110 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2110 MHz

-2.69

-2.27 Regulatory WWAN Antenna Information 60/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 2140 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2140 MHz

-2.02

-2.27 Regulatory WWAN Antenna Information 61/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 2170 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2170 MHz

-2.17

-2.77 Regulatory WWAN Antenna Information 62/86 Doc.No.:3.8.05 Rev 8.0 draft 734-746MHz radiation characteristic Tx2 antenna: 734 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 734 MHz

-5.91

-10.18 Regulatory WWAN Antenna Information 63/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 740 MHz 740 MHz

-6.21

-10.13 Center Frequency Horizontal (dBi) peak Vertical (dBi) peak Regulatory WWAN Antenna Information 64/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 746MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 746 MHz

-6.13

-10.28 Regulatory WWAN Antenna Information 65/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 751MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 751 MHz

-5.79

-10.42 Regulatory WWAN Antenna Information 66/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 756MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 756 MHz

-5.48

-10.37 Regulatory WWAN Antenna Information 67/86 Doc.No.:3.8.05 Rev 8.0 draft 791-821MHz radiation characteristic Tx2 antenna: 791MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 791 MHz

-6.28

-8.04 Regulatory WWAN Antenna Information 68/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 806MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 806 MHz

-6.74

-6.93 Regulatory WWAN Antenna Information 69/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 821MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 821 MHz

-6.30

-5.98 Regulatory WWAN Antenna Information 70/86 Doc.No.:3.8.05 Rev 8.0 draft 2132-2155MHz radiation characteristic Tx2 antenna: 2132 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2132 MHz

-2.14

-2.21 Regulatory WWAN Antenna Information 71/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 2155MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2155 MHz

-1.97

-2.47 Regulatory WWAN Antenna Information 72/86 Doc.No.:3.8.05 Rev 8.0 draft 2620-2690MHz radiation characteristic Tx2 antenna: 2620MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2620 MHz

-5.73

-5.98 Regulatory WWAN Antenna Information 73/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 2655MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2655 MHz

-7.16

-9.37 Regulatory WWAN Antenna Information 74/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 2690MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2690 MHz

-7.55

-9.67 Regulatory WWAN Antenna Information 75/86 Doc.No.:3.8.05 Rev 8.0 draft 2570-2620 MHz radiation characteristic Tx2 antenna: 2570 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2570 MHz

-3.81

-3.49 Regulatory WWAN Antenna Information 76/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 2595 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2595 MHz

-4.46

-4.45 Regulatory WWAN Antenna Information 77/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 2620 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2620MHz

-5.73

-5.98 Regulatory WWAN Antenna Information 78/86 Doc.No.:3.8.05 Rev 8.0 draft 2300-2400 MHz radiation characteristic Tx2 antenna: 2300 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2300 MHz 0.23 0.73 Regulatory WWAN Antenna Information 79/86 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 2350 MHz Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2350 MHz 0.29 0.15 Regulatory WWAN Antenna Information 80/86 Center Frequency Horizontal (dBi) peak Vertical (dBi) peak 2400 MHz

-2.44

-0.46 Doc.No.:3.8.05 Rev 8.0 draft Tx2 antenna: 2400 MHz Regulatory WWAN Antenna Information 81/86 Doc.No.:3.8.05 Rev 8.0 draft Section 4. Host Platform Information OEM / ODM Host platform: (Compal/Miramar) platform correlated to antenna data Rating Label Photo:

Regulatory WWAN Antenna Information 82/86 Doc.No.:3.8.05 Rev 8.0 draft Section 5. Antenna Host Platform Location Information Include a dimensioned photo(s) or dimensioned drawing(s) of Tx1, Tx2 and Tx3 antenna placements (measurements are not required for receive-only antenna). Any antenna that transmits must show dimensions to bottom of laptop. Provide a description of the materials that are used for supporting or surrounding transmit antennas;

for example, non-conductive plastics vs. conductive coated plastic or metallic materials. Regulatory WWAN Antenna Information 83/86 Doc.No.:3.8.05 Rev 8.0 draft Section 6. Antenna dimensional information for SAR evaluation Include a dimensioned photo(s) or dimensioned drawing(s) showing the distance

(mm) between the transmit antennas and the user (excluding hands, wrist, feet, and ankle). For notebook/laptop hosts show lapheld position (example below). For tablet hosts show all orientations including lapheld, primary & secondary portrait, primary &

secondary landscape positions. Include a description of any proximity sensors or power throttling implementations that limit or exclude use of any host orientation. Regulatory WWAN Antenna Information 84/86 Doc.No.:3.8.05 Rev 8.0 draft Section 7. Diagram Example of Co-Location Antenna Separation Include a dimensioned photo or dimensioned drawing showing the distance (mm) between all WLAN transmit antennas and other co-located radiator transmit antenna such as Bluetooth, WWAN,..

(Note: Due to the evolving rules regarding co-location, each platform will need to be reviewed on a case by case basis) Regulatory WWAN Antenna Information 85/86 Doc.No.:3.8.05 Rev 8.0 draft Section 8. Local representative contact information Local representative contact information is required for regulatory support for target countries below. Local company name Contact name FAX Number e-Mail Address Notes Phone number Telecommunication Equipment Dealer License Required Argentina Azerbaijan Cambodia Indonesia Israel Malaysia Philippines Singapore South Africa USA, Canada Vietnam Regulatory WWAN Antenna Information 86/86