FCC ID: B94HNC78CBXN Tablet PC

Regulatory, Safety and Environmental Notices User Guide Copyright 2012 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. ENERGY STAR is a registered mark owned by the U.S. government. Java is a trademark of Sun Microsystems. Microsoft, Windows, and Windows Vista are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Third Edition: September 2012 Second Edition: July 2012 First Edition: March 2012 Document Part Number: 689409-003 About This Guide This guide provides regulatory, safety and environmental information that is compliant with U.S., Canadian, and international regulations for notebook computers, desktops, thin clients and personal workstations. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. iii iv About This Guide Table of contents 1 Regulatory notices for notebook computers ............................................................................................... 1 Federal Communications Commission notice ...................................................................................... 3 Modifications ........................................................................................................................ 3 Cables .................................................................................................................................. 3 Declaration of Conformity for products marked with the FCC logo (United States only) ..... 4 Products with wireless LAN devices or HP Mobile Broadband Modules ............................. 4 Brazil notice .......................................................................................................................................... 5 Canada notices .................................................................................................................................... 5 European Union regulatory notices ...................................................................................................... 5 Declaration of Conformity .................................................................................................... 5 Products with wireless modules (EMF) ............................................................... 6 European telephone network declaration (Modem/Fax) ..................................... 7 Ergonomics notice ............................................................................................... 7 Germany (English text) ....................................................................... 7 Germany (Deutscher text) .................................................................. 7 Japan notices ....................................................................................................................................... 8 Wireless LAN, Wireless WAN, and Bluetooth certification markings ................................... 9 South Korea notices ............................................................................................................................. 9 Mexico notice ....................................................................................................................................... 9 Singapore wireless notice .................................................................................................................... 9 Thailand WWAN wireless notice ........................................................................................................ 10 Taiwan notices ................................................................................................................................... 10 Wireless LAN 802.11a devices .......................................................................................... 10 Wireless LAN 802.11b devices .......................................................................................... 10 Airline travel notice ............................................................................................................................. 11 User-replaceable battery notices ........................................................................................................ 11 ENERGY STAR compliance ............................................................................................................ 11 Laser compliance ............................................................................................................................... 12 Modem notices ................................................................................................................................... 12 Telecommunications device approvals .............................................................................. 12 U.S. modem statements .................................................................................................... 13 U.S. modem declarations .................................................................................................. 13 Canada modem statements ............................................................................................... 15 Japan modem statements ................................................................................................. 15 New Zealand modem statements ...................................................................................... 15 Voice support .................................................................................................... 16 v Power cord notice ............................................................................................................................... 16 Japan power cord notice .................................................................................................... 16 DC plug of external HP power supply ................................................................................ 16 Macrovision Corporation notice .......................................................................................................... 16 2 Regulatory notices for desktops, thin clients and personal workstations ............................................. 17 Modem notices ................................................................................................................................... 17 Telecommunications device approvals .............................................................................. 17 U.S. modem statements .................................................................................................... 17 Canadian modem statements ............................................................................................ 18 Japanese modem statements ............................................................................................ 18 New Zealand modem statements ...................................................................................... 19 Voice support .................................................................................................... 19 Electromagnetic compatibility notices ................................................................................................ 20 Federal Communications Commission notice ................................................................... 20 Modifications ..................................................................................................... 20 Cables ............................................................................................................... 20 Declaration of conformity for products marked with the FCC logo (United States only) ....................................................................................................... 21 Products with wireless LAN devices ................................................................. 21 Australia telecom statement .............................................................................................. 21 Brazil notice ....................................................................................................................... 22 Canadian notice ................................................................................................................. 22 European Union regulatory notices ................................................................................... 22 Declaration of Conformity .................................................................................. 22 Products with wireless modules ....................................................... 23 European telephone network declaration (Modem/Fax) ................... 24 Ergonomics notice ............................................................................ 24 Japan notice ...................................................................................................................... 24 Wireless LAN and Bluetooth certification markings .......................................... 24 South Korea notices .......................................................................................................... 25 Mexico notice ..................................................................................................................... 25 Taiwan NCC notice ............................................................................................................ 25 3 Safety notices for notebook computers ..................................................................................................... 26 Heat-related safety warning notice ..................................................................................................... 26 Potential safety conditions notice ....................................................................................................... 26 User-replaceable battery notices ........................................................................................................ 26 Headset and earphone volume level notice ....................................................................................... 27 Power cord notices ............................................................................................................................. 27 Cleaning the keyboard ....................................................................................................................... 27 vi Travel notice ....................................................................................................................................... 27 China safety notices ........................................................................................................................... 27 China: Altitude notice ......................................................................................................... 27 China: Tropical warning notice .......................................................................................... 28 Norway and Sweden: Cable grounding notice for products with a TV tuner ...................................... 28 4 Safety notices for desktops, thin clients and personal workstations ..................................................... 29 Important safety information ............................................................................................................... 29 Installation conditions ......................................................................................................................... 29 Battery replacement notice ................................................................................................................. 30 Headset and earphone volume level notice ....................................................................................... 30 Laser safety ........................................................................................................................................ 31 Power supply and power cord set requirements ................................................................................ 31 Power supply class I grounding requirements ................................................................... 31 Denmark ............................................................................................................ 31 Finland .............................................................................................................. 31 Norway .............................................................................................................. 31 Sweden ............................................................................................................. 31 Power supply requirements ............................................................................................... 31 For use in Norway ............................................................................................. 32 Power cord set requirements ............................................................................................. 32 Japan power cord requirements ........................................................................................ 32 Pinch hazard ...................................................................................................................................... 32 China safety notices ........................................................................................................................... 33 China: Altitude notice ......................................................................................................... 33 China: Tropical warning notice .......................................................................................... 33 Germany acoustics notice .................................................................................................................. 34 5 Environmental notices for notebook computers ....................................................................................... 35 Electronic hardware and battery recycling ......................................................................................... 35 Disposal of waste equipment by users ............................................................................................... 35 Chemical substances ......................................................................................................................... 35 China environmental notices .............................................................................................................. 36 China restriction of hazardous substances (RoHS) ........................................................................... 36 Japan material content declaration .................................................................................................... 39 Mexico Sustainable Energy Use Law ................................................................................................. 39 Turkey EEE regulation ....................................................................................................................... 39 Ukraine restriction of hazardous substances ..................................................................................... 39 Perchlorate materialspecial handling may apply ............................................................................ 39 vii 6 Environmental notices for desktops, thin clients and personal workstations ....................................... 40 Electronic hardware and battery recycling ......................................................................................... 40 Disposal of waste equipment by users ............................................................................................... 40 ENERGY STAR qualification (select models only) .......................................................................... 40 Chemical substances ......................................................................................................................... 41 Mercury statement .............................................................................................................................. 41 Perchlorate materialspecial handling may apply .............................................................................. 41 China restriction of hazardous substances (RoHS) ........................................................................... 42 The Table of Toxic and Hazardous Substances/Elements and their Content ................... 42 IT ECO declarations ........................................................................................................................... 43 Japan restriction of hazardous substances (RoHS) ........................................................................... 44 Ley para el Aprovechamiento Sustentable de la Energa de Mxico (Mexico Sustainable Energy Use Law) ............................................................................................................................................ 44 Turkey EEE regulation ....................................................................................................................... 44

(Ukraine restriction of hazardous substances) ........................................................................................................................................ 44 Index ................................................................................................................................................................... 45 viii 1 Regulatory notices for notebook computers This chapter provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. To identify a hardware device such as a wireless LAN (WLAN) network device, choose the procedure below that corresponds to the operating system running on your computer. For Windows Vista, follow these steps:

1. 2. For Windows 7, follow these steps:

Select Start > Control Panel > System and Security > Device Manager. For Windows 8, follow these steps:

1. 2. From the Start screen, type c, and then select Control Panel. Select System and Security, and then in the System area, select Device Manager. A list displays all the devices installed on your computer. Select Start > Computer > System properties. In the left pane, click Device Manager. For non-Windows operating systems, follow the instructions provided by your operating system to identify a hardware device such as a wireless LAN (WLAN) network device. Regulatory markings for your country or region may be located on the bottom of the product, either under the battery, under a user-removable door (or some other user-accessible location), or on the wireless or modem module. For Windows 7, to view the FCC IDs for any radio modules in your notebook (such as Bluetooth, WLAN, or WWAN), follow these steps:

1. Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the screen. Press f10 to enter BIOS Setup. Select the System Configuration menu. 2. 3. For Windows 8, follow these instructions:

1. Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the screen. Press f10 to enter Computer Setup. 2. The FCC IDs are displayed at the bottom of the screen. 1 CAUTION: Devices not for sale or use in the United States may not have an FCC ID. 2 Chapter 1 Regulatory notices for notebook computers Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Federal Communications Commission notice 3 Declaration of Conformity for products marked with the FCC logo

(United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. 2. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. If you have questions about the product that are not related to this declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000 For questions regarding this FCC declaration, write to Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000 or call HP at 281-514-3333 To identify your product, refer to the part, series, or model number located on the product. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. 4 Chapter 1 Regulatory notices for notebook computers Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Este equipamento atende aos limites de Taxa de Absoro Especfica referente exposio a campos eltricos, magnticos e eletromagnticos de radiofreqncias adotados pela ANATEL. Canada notices This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING! Exposure to Radio Frequency Radiation: The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm (12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. European Union regulatory notices Declaration of Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC Ecodesign Directive 2009/125/EC R&TTE Directive 1999/5/EC RoHS Directive 2011/65/EU Brazil notice 5 CE compliance of this product is valid only if powered with the correct CE-marked AC adapter (where applicable) and power cord provided by HP are used. See Power cord set requirements on page 32. Compliance with these directives implies conformity to applicable harmonized European standards

(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family and available either within the product documentation or at the following Web site:

www.hp.eu/certificates (Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) Compliance is indicated by the CE-marking as shown below. Where applicable for telecommunications products a 4-digit notified body number may follow it as a suffix. Please refer to the regulatory label provided on the product. The telecommunications functionality of this product may be used in the following EU and EFTA countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. The point of contact for regulatory matters is Hewlett-Packard GmbH, Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, GERMANY. Products with wireless modules (EMF) THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCY RADIATION. The wireless module in your notebook computer is a radio transmitter and receiver. The device is designed not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines that establish permitted levels of RF radiation for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The device also meets the European R&TTE directives, including the protection of the health and the safety of the user and any other person. The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR).* The SAR was obtained by testing the device at standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR of the device while operating can be well below the maximum value, because the device operates at multiple power levels and uses only the power required to reach the network. When installed in the notebook computer, this device meets RF exposure guidelines when the antennas are positioned at a minimum distance from the body. In order to transmit data or messages, this device requires a quality connection to the network. In some cases, transmission of data or messages may be delayed until such a connection becomes available. Be sure that the recommended distance is observed until the transmission is complete.

*The non-FCC, international guidelines state that the SAR limit for mobile devices used by the public is 2.0 watts/kilogram (W/kg) averaged over 10 grams of body tissue. The guidelines incorporate a 6 Chapter 1 Regulatory notices for notebook computers substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. European telephone network declaration (Modem/Fax) The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC (Annex II) and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. This equipment has been designed to work with analogue DTMF Networks. This equipment may have internetworking difficulties in PSTN networks that only support Pulse Dialing. Please consult with your network operator for further assistance. Ergonomics notice Germany (English text) When a mobile computer is used at the office workstation for display work tasks where the Visual Display Unit (VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required. Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup. Ref: EK1-ITB 2000 (voluntary GS certification) Mobile computers bearing the "GS" approval mark meet the applicable ergonomic requirements. Without external keyboards, they are suitable only for short-time use of VDU tasks. During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may occur, which result in reduced readability. Germany (Deutscher text) Wird ein mobiler Computer fr Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG

(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig. Abhngig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationren Arbeitsplatz zu erreichen. Ref: EK1-ITB 2000 (freiwillige GS Zertifizierung) Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur fr kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet. Bei mobiler Nutzung mit ungnstigen Lichtverhltnissen (z.B. direkte Sonneneinstrahlung) kann es zu Reflexionen und damit zu Einschrnkungen der Lesbarkeit der dargestellten Zeichen kommen. European Union regulatory notices 7 Japan notices 8 Chapter 1 Regulatory notices for notebook computers Wireless LAN, Wireless WAN, and Bluetooth certification markings This product contains certified radio equipment. South Korea notices Mexico notice Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory. Singapore wireless notice Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network. Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both. Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment. This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, South Korea notices 9 regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands. The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue. Thailand WWAN wireless notice This telecom equipment has complied with NTC regulations. Taiwan notices Wireless LAN 802.11a devices Wireless LAN 802.11b devices 10 Chapter 1 Regulatory notices for notebook computers Airline travel notice Use of electronic equipment onboard commercial aircraft is at the discretion of the airline. User-replaceable battery notices When a battery has reached the end of its useful life, do not dispose of the battery in general in household waste. Follow the local laws and regulations in your area for computer battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP Web site at http://www.hp.com/recycle. For information about removing a user-replaceable battery, refer to the user guide included with the product. ENERGY STAR compliance As an ENERGY STAR Partner, Hewlett-Packard Company has followed the EPAs enhanced product qualification and certification process to ensure that the products marked with the ENERGY STAR logo are ENERGY STAR qualified per the applicable ENERGY STAR guidelines for energy efficiency. The following logo appears on all ENERGY STAR-qualified computers:

The ENERGY STAR program for computers was created by the EPA to promote energy efficiency and reduce air pollution through more energy-efficient equipment in homes, offices, and factories. One way that products achieve this goal is by using the Microsoft Windows power management feature to reduce power consumption when the product is not in use. The power management feature allows the computer to initiate a low-power or Sleep mode after a period of user inactivity. When used with an external ENERGY STAR qualified monitor, this feature also supports similar power management features of the monitor. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power:

Turn off the display after 10 minutes Initiate Sleep after 20 minutes The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal. Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/powermanagement. Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov. Airline travel notice 11 Laser compliance WARNING! Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide. Allow only authorized service providers to repair the unit. This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser Product in accordance with IEC/EN 60825-1 and meets the requirements for safety of that standard. Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007. Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (network) jack. SAVE THESE INSTRUCTIONS Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. 12 Chapter 1 Regulatory notices for notebook computers U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. U.S. modem declarations Refer to the following modem vendor declarations for the modem device installed in your computer:

Modem notices 13 14 Chapter 1 Regulatory notices for notebook computers Canada modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japan modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the V.92 56K Data/Fax Modem is below:

New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. b. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). d. Modem notices 15 Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Power cord notice If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6 ft). If you have questions about the type of power cord to use, contact your authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. Japan power cord notice DC plug of external HP power supply Macrovision Corporation notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 16 Chapter 1 Regulatory notices for notebook computers 2 Regulatory notices for desktops, thin clients and personal workstations Modem notices WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:

Do not use this product near waterfor example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning. Do not use this product to report a gas leak while in the vicinity of the leak. Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component. If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord. Do not plug a modem or telephone cable into the RJ-45 (Ethernet network) jack. SAVE THESE INSTRUCTIONS Telecommunications device approvals The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem. Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used. U.S. modem statements This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so. Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. Modem notices 17 The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label. If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service. If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the Troubleshooting section of the user guide, if one is provided. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges). In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions. Canadian modem statements This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japanese modem statements If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below. The Japanese certification mark for the LSI Corporation PCI-SV92EX Soft modem is below:

18 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations New Zealand modem statements The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances. If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing. Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service. Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications:

a. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt. b. c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10). d. Voice support All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party. This equipment shall not be set to make automatic calls to the Telecom 111' Emergency Service. Modem notices 19 Electromagnetic compatibility notices This guide provides country- and region-specific nonwireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product. One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations. 20 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations Declaration of conformity for products marked with the FCC logo (United States only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. 2. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. For questions regarding the product, contact:

Hewlett-Packard Company P.O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 For questions regarding this FCC declaration, contact:

Hewlett-Packard Company P.O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333. To identify this product, refer to the part, series, or model number found on the product. Products with wireless LAN devices This product may be equipped with a wireless LAN device. This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of the wireless antennae, refer to the documentation included with the computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to cochannel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. Australia telecom statement The computer must be connected to the Telecommunication Network through a line cord that meets the requirements of ACA Technical Standard TS008. WARNING! Modems without integral RJ-11 that are shipped with this computer must be installed only in devices displaying the A-tick. Electromagnetic compatibility notices 21 Brazil notice Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. CAUTION: A alimentao de energia predefinida para 220/230Vv. Se voc possuir tomada eltrica de 110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tenso correta. Canadian notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. If this device has WLAN or Bluetooth capability, this device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. During normal operation: To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of the wireless antennae, refer to the documentation included with the computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antenna for this device is not replaceable. Any attempt at user modification may damage your computer. European Union regulatory notices Declaration of Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:

Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC Ecodesign Directive 2009/125/EC R&TTE Directive 1999/5/EC RoHS Directive 2011/65/EU CE Compliance of this product is only valid if the correct CE-marked AC adapter (where applicable) and power cord provided by HP are used. See also Power cord set requirements on page 32. Compliance with these directives implies conformity to applicable harmonized European standards

(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family and available either within the product documentation or at the following Web site:

22 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations www.hp.eu/certificates (Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.) Compliance is indicated by the CE-marking as shown below. Where applicable for telecommunications products a 4-digit notified body number may follow it as a suffix. Please refer to the regulatory label provided on the product. The telecommunications functionality of this product may be used in the following EU and EFTA countries: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom. The point of contact for regulatory matters is Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany. Products with wireless modules THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO FREQUENCY RADIATION. The wireless module in your computer is a radio transmitter and receiver. The device is designed not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines

(ICNIRP). These limits are part of comprehensive guidelines that establish permitted levels of RF radiation for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The device also meets the European R&TTE directives, including the protection of the health and the safety of the user and any other person. The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR).* The SAR was obtained by testing the device at standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR of the device while operating can be well below the maximum value, because the device operates at multiple power levels and uses only the power required to reach the network. When installed in the computer, this device meets RF exposure guidelines when the antennas are positioned at a minimum distance from the body. In order to transmit data or messages, this device requires a quality connection to the network. In some cases, transmission of data or messages may be delayed until such a connection becomes available. Be sure that the recommended distance is observed until the transmission is complete.

*The non-FCC, international guidelines state that the SAR limit for mobile devices used by the public is 2.0 watts/kilogram (W/kg) averaged over 10 grams of body tissue. The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New Zealand Standards. Electromagnetic compatibility notices 23 European telephone network declaration (Modem/Fax) The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC (Annex II) and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. This equipment has been designed to work with analogue DTMF Networks. This equipment may have internetworking difficulties in PSTN networks that only support Pulse Dialing. Please consult with your network operator for further assistance. Ergonomics notice Germany (English text) A computer system comprising HP brand products meets the applicable German ergonomic requirements if all affected constituent products bear the "GS" approval mark, for example Business Desktop PC, keyboard, PC-mouse and monitor. Germany (Deutscher text) Ein aus HP Produkten bestehendes Computersystem erfllt die anwendbaren ergonomischen Anforderungen, wenn alle verwendeten Komponenten das GS Zeichen tragen, wie z. B. Business Desktop PC, Tastatur, PC-Maus und Bildschirm. Japan notice B VCCI-B Wireless LAN and Bluetooth certification markings If this device contains radio equipment, it is certified radio equipment. 24 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations South Korea notices Mexico notice Declaracin para Mxico La operacin de este equipo est sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory. Taiwan NCC notice Electromagnetic compatibility notices 25 3 Safety notices for notebook computers WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product. Heat-related safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC/EN 60950). Potential safety conditions notice If you notice any of the following conditions (or if you have other safety concerns), do not use the computer: crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer. It is normal for these conditions to appear when an internal electronic component fails in a safe and controlled manner. However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact technical support for assistance. User-replaceable battery notices WARNING! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water. WARNING! Keep the battery away from children. WARNING! To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer. 26 Chapter 3 Safety notices for notebook computers Headset and earphone volume level notice WARNING! Listening to music at high volume levels and for extended durations can damage ones hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels. For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same. Changing the default audio or equalizer settings might lead to higher volume and should only be done with caution. For your own safety, headsets or earphones used with this product should comply with the headphone limits in EN 50332-2. If the computer includes a headset or earphones, this combination is in compliance to EN 50332-1. Power cord notices WARNING! To reduce the risk of electric shock or damage to the equipment:

Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-

pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. WARNING! To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer. Cleaning the keyboard WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris. Travel notice WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances. China safety notices China: Altitude notice Altitude warning for products not certified for use in >5000 m Headset and earphone volume level notice 27 2000m or 2000 China: Tropical warning notice Tropical warning for products not certified for use in tropical regions. Norway and Sweden: Cable grounding notice for products with a TV tuner CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system. 28 Chapter 3 Safety notices for notebook computers 4 Safety notices for desktops, thin clients and personal workstations Important safety information WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product. To reduce the risk of electric shock or damage to your equipment:

Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times. Disconnect power from the thin client by unplugging the power cord from the electrical outlet. The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving it. Install the computer near an AC outlet. The AC power cord is your computers main AC disconnecting device and must be easily accessible at all times. For your safety, the power cord provided with your computer has a grounded plug. Always use the power cord with a properly grounded wall outlet, to avoid the risk of electrical shock. To reduce the possibility of an electric shock from the telephone network, plug your computer into the AC outlet before connecting it to the telephone line. Also, disconnect the telephone line before unplugging your computer from the AC power outlet. Always disconnect the modem cord from the telephone system before installing or removing your computer cover. Do not operate the computer with the cover removed. For your safety, always unplug the computer from its power source and from any telecommunications systems (such as telephone lines), networks, or modems before performing any service procedures. Failure to do so may result in personal injury or equipment damage. Hazardous voltage levels are inside the power supply and modem of this product. CAUTION:

system, the voltage select switch has been pre-set to the correct voltage setting for use in the particular country/region where it was initially sold. Changing the voltage select switch to the incorrect position can damage your computer and void any implied warranty. This product has not been evaluated for connection to an IT power system (an AC distribution system with no direct connection to earth, according to IEC/EN 60950). If your computer is provided with a voltage select switch for use in a 115 or 230 V power Installation conditions See installation instructions before connecting this equipment to the input supply. Important safety information 29 WARNING! The equipment must be provided with a proper AC protective earth (PE) ground connection. Energized and moving parts may be inside the computer. Disconnect power to the equipment before removing the enclosure. Replace and secure the enclosure before re-energizing the equipment. Battery replacement notice WARNING! The product may contain an internal lithium manganese dioxide, vanadium pentoxide, or alkaline battery or battery pack. There is risk of fire and burns if the battery pack is not handled properly. To reduce the risk of personal injury:

Do not attempt to recharge the battery. Do not expose to temperatures higher than 60 C (140 F). Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Replace only with the HP spare designated for this product. For information about removing a battery, refer to your computer documentation. Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. In order to forward them to recycling or proper disposal, please use the public collection system or return them to HP, an authorized HP partner, or their agents. The Taiwan EPA requires dry battery manufacturing or importing firms, in accordance with Article 15 of the Waste Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or promotions. Contact a qualified Taiwanese recycler for proper battery disposal. Headset and earphone volume level notice WARNING! Listening to music at high volume levels and for extended durations can damage ones hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels. For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same. Changing the default audio or equalizer settings might lead to higher volume and should only be done with caution. If the computer includes a headset or earphones and bears the "GS" mark, this combination is in compliance with EN 50332-1. For your own safety, headsets or earphones used with these products should comply with the headphone limits in EN 50332-2. 30 Chapter 4 Safety notices for desktops, thin clients and personal workstations Laser safety For products equipped with optical drives or fiber optic transceivers. This product may be provided with an optical storage device (i.e., CD or DVD drive) and/or fiber optic transceiver. These contain lasers and are classified as Class 1 Laser Products in accordance with the standard IEC/EN 60825-1 and comply with its requirements. Each laser product complies with US FDA Regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the laser products installation guide may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:

Do not try to open the module enclosure. There are no user-serviceable components inside. Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein. Allow only HP Authorized Service technicians to repair the unit. Power supply and power cord set requirements Power supply class I grounding requirements For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the system power cord into an AC outlet that provides a ground connection. Substitute cords may not provide adequate fault protection. Only use the power cord supplied with this product or a Hewlett-

Packard authorized replacement. Denmark For tilslutning af de vrige ledere, se medflgende installationsvejledning. Finland Norway Sweden Laite on liitettv suojamaadoituskoskettimilla varustettuun pistorasiaan. Apparatet m kun tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag, nr den ansluts till ett ntverk. Power supply requirements The power supplies on some products have external power switches. The voltage select switch feature on the product permits it to operate from any line voltage between 100-127 or 200-240 volts AC. Power supplies on those products that do not have external power switches are equipped with internal circuits that sense the incoming voltage and automatically switch to the proper voltage. For safety reasons, use only the AC adapter provided with the unit or an authorized replacement adapter from Hewlett-Packard. Replacement part numbers may be found at http://www.hp.com/cgi-

bin/hpsupport/index.pl. Laser safety 31 For use in Norway This product is also designed for an IT power system with phase-to-phase voltage 230V. Power cord set requirements The power cord set received with the product meets the requirements for use in the country where the equipment was originally purchased. Use only the power cord provided with the unit or an authorized replacement power cord from Hewlett-Packard or an approved HP source. Replacement part numbers may be found at http://www.hp.com/cgi-bin/hpsupport/index.pl. Power cord sets for use in other countries must meet the requirements of the country where you use the product. For more information on power cord set requirements, contact your authorized HP dealer, reseller, or service provider. WARNING! Do not use power cords from other products. Mismatched power cords may result in a shock and fire hazard. The requirements listed below are applicable to all countries:

1. The power cord must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be installed. The length of the power cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). For a power cord 2.0 m (6.56 feet) or less, the diameter of the wire must be a minimum of 0.75 mm2 or 18AWG. If the power cord is longer than 2.0 m (6.56 feet), the diameter of the wire must be a minimum of 1.0 mm2 or 16AWG. 2. The power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. WARNING! Do not operate this product with a damaged power cord set. If the power cord set is damaged in any manner, replace it immediately. Damaged cords may result in user exposure to hazards. Japan power cord requirements For use in Japan, use only the power cord received with this product. CAUTION: Do not use the power cord received with this product on any other products. Pinch hazard WARNING! Observe pinch hazard areas. Keep fingers away from closing parts. 32 Chapter 4 Safety notices for desktops, thin clients and personal workstations China safety notices China: Altitude notice Altitude warning for products not certified for use in >5000 m 2000m or 2000 China: Tropical warning notice Tropical warning for products not certified for use in tropical regions. China safety notices 33 Germany acoustics notice Sound pressure level (LpA) is far below 70dB(A) (operator position, normal operation, according to ISO 7779) Product noise emission data can be found in the product related IT ECO Declarations at Internet address: http://www.hp.com/go/ted Schalldruckpegel (LpA) ist weit unterhalb 70 dB(A) (Benutzerposition, normaler Betrieb, nach ISO 7779) Die Schallemissionswerte der Produkte knnen in den produktbezogenen IT ECO Declarations auf folgender Internet Adresse gefunden werden: http://www.hp.com/go/ted 34 Chapter 4 Safety notices for desktops, thin clients and personal workstations 5 Environmental notices for notebook computers This chapter provides country- and region-specific environmental notices and compliance information. Some of these notices may not apply to your product. Electronic hardware and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle. Disposal of waste equipment by users This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/

recycle. Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. Electronic hardware and battery recycling 35 China environmental notices http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/chinasepa.html http://www.hp.com.cn/hardwarerecycle

( http://www. sepa.gov.cn) China restriction of hazardous substances (RoHS) The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products Part Name Battery Cables Camera Chassis/Other Flash memory card reader Floppy disk drive Hard disk drive Headphones I/O PCAs Keyboard Liquid crystal display

(LCD) panel Toxic and Hazardous Substances and Elements Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Media (CD/DVD/floppy) O 36 Chapter 5 Environmental notices for notebook computers Part Name Memory Motherboard, processor, heat sinks Mouse Optical disk drive Optional docking device Power adapter Power supply Remote control Smart card/Java card reader Speakers, external TV tuner USB flash memory drive USB hub Web camera Wireless receiver Wireless cards Toxic and Hazardous Substances and Elements Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybrominated biphenyls (PBB) Polybrominated diphenyl ethers

(PBDE) X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. All parts named in this table with an X are in compliance with the European Union's RoHS Legislation Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment and its amendments. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.

(Pb)

(Hg)

(Cd) X O O

(Cr(VI)) O

(PBB) (PBDE) O O China restriction of hazardous substances (RoHS) 37

I/O PCA

(LCD) CD/DVD/

/Java USB USB

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB) (PBDE) X X X X X X X X X X O X X X X X X X X X X X X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O SJ/T11363-2006 X SJ/T11363-2006 X RoHS 2003 1 27 2002/95/EC

38 Chapter 5 Environmental notices for notebook computers Japan material content declaration A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide material content declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950. Mexico Sustainable Energy Use Law This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). Turkey EEE regulation In Conformity with the EEE regulation EEE Ynetmeliine Uygundur Ukraine restriction of hazardous substances The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.

, 3 2008 1057. Perchlorate materialspecial handling may apply See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. This products real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California. Japan material content declaration 39 6 Environmental notices for desktops, thin clients and personal workstations Electronic hardware and battery recycling HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/

recycle. For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/. Disposal of waste equipment by users This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/recycle. ENERGY STAR qualification (select models only) NOTE: This section applies only to products bearing the Energy Star logo. As an ENERGY STAR Partner, Hewlett-Packard Company has followed the U.S. Environmental Protection Agency (EPA) enhanced product qualification and certification process to ensure that the products marked with the ENERGY STAR logo are ENERGY STAR-qualified per the applicable ENERGY STAR guidelines for energy efficiency. The following logo appears on all ENERGY STAR-

qualified computers. The ENERGY STAR Computers Program was created by the EPA to promote energy efficiency and reduce air pollution through more energy-efficient equipment in homes, offices, and factories. One way products achieve this energy efficiency is by reducing power consumption when not being used through the Microsoft Windows Power Management feature. The Power Management feature enables the computer to enter a low-power (or sleep) mode after a period of inactivity. When used with an external monitor that is ENERGY STAR-qualified, this feature also supports the similar power management features of the external monitor. To take advantage of this energy savings, the Power Management feature has been preset to power down the computer and monitor within the following specified periods of inactivity:

40 Chapter 6 Environmental notices for desktops, thin clients and personal workstations Computer Monitor/Integrated Display Desktops and Workstations Within 30 minutes Thin Clients and Desktops Not applicable Within 15 minutes Within 15 minutes Both the computer and monitor can be woken from sleep mode through user interaction with any of the computer input devices (mouse, keyboard, and so on). When configured with Wake On LAN

(WOL) enabled, the computer can also be woken by a network signal. See the EPA ENERGY STAR Power Management Web site for more information about the energy and financial savings potential of the Power Management Feature: http://www.energystar.gov/

powermanagement. See the EPA ENERGY STAR Web site for more information about the ENERGY STAR program and its environmental benefits: http://www.energystar.gov. CAUTION: Using the Energy Save Monitor feature with monitors that are not ENERGY STAR-

qualified can cause video distortion when an Energy Save timeout occurs. NOTE: ENERGY STAR is not supported on Desktop PCs and workstations configured with some versions of Linux or FreeDOS. If it is necessary to restore the operating system, you must also reset the ENERGY STAR settings (if applicable) after the restore. For Windows 7, to verify the factory default power settings for your desktop or workstation, select Start > Control Panel, and then type Power Options in the search window. For Windows 8, to verify the factory default power settings for your desktop or workstation, from the Start screen, type power, select Settings, and then select Power Options from the list of applications. Chemical substances HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No. 1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach. Mercury statement This HP product may contain the following material that might require special handling at end-of-life:

Mercury in the fluorescent lamp in the display LCD Disposal of mercury can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA)

(http://www.eiae.org). Perchlorate materialspecial handling may apply The computers real-time clock battery may contain perchlorate and may require special handling when recycled or disposed of in California. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/. Chemical substances 41 China restriction of hazardous substances (RoHS)

I/O PCAs

O: SJ/T11363-2006

X: SJ/T11363-2006

XRoHS 20031272002/95/EC

The Table of Toxic and Hazardous Substances/Elements and their Content As required by China's Management Methods for Controlling Pollution by Electronic Information Products 42 Chapter 6 Environmental notices for desktops, thin clients and personal workstations Table 6-1 Toxic and Hazardous Substances and Elements Part Name Lead

(Pb) Mercury

(Hg) Cadmium

(Cd) Hexavalent Chromium

(Cr(VI)) Polybromi-

nated biphenyls

(PBB) Polybromi-

nated diphenyl ethers (PBDE) Motherboard, processor and heat sink X Memory I/O PCAs Power supply Keyboard Mouse Chassis/Other Fans Internal/External Media Reading Devices External Control Devices Cable Hard Disk Drive Display X X X X X X X X X X X X O O O O O O O O O O O O X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. All parts named in this table with an X are in compliance with the European Union's RoHS Legislation Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity. IT ECO declarations Desktop PCs and Thin Clients http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?

jumpid=reg_R1002_USEN Workstations http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html IT ECO declarations 43 Japan restriction of hazardous substances (RoHS) 2008 JISC0950 2006 7 http://www.hp.com/go/jisc0950 A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950. Ley para el Aprovechamiento Sustentable de la Energa de Mxico (Mexico Sustainable Energy Use Law) Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energa de Mxico, que requiere la divulgacin del consumo de energa del modo de uso normal

(modo inactivo) y del modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energa del modo inactivo de su configuracin especfica puede diferir de la informacin de la etiqueta. El consumo real de energa de su producto puede ser mayor o menor que el valor informado en la etiqueta de energa de producto para Mxico a causa de factores como la configuracin (componentes y mdulos seleccionados) y el uso (tareas que se estn efectuando, software instalado y en ejecucin, etc.). NOTE: Esta ley no es aplicable a los workstations. This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.). NOTE: Workstations are not labeled because the law is not applicable to the workstation product category. Turkey EEE regulation Trkiye Cumhuriyeti: EEE Ynetmeliine Uygundur

(Ukraine restriction of hazardous substances)

, 3 2008 1057. The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment. 44 Chapter 6 Environmental notices for desktops, thin clients and personal workstations Index A airline travel notice 11 altitude notice 27, 33 B battery notice 11, 26, 39 battery recycling 35 Brazil notice 5 C cable grounding notice 28 Canada modem statement 15 Canada notices 5 China environmental notices 36 China restriction of hazardous substances notice 36, 42 D Declaration of Conformity notebook computers 4 disposal notices battery 39 battery, user replacement 11 equipment 35 E electronic hardware and battery recycling 35 ENERGY STAR compliance 11 environmental notices 35 equipment disposal notice 35 ergonomics notice 7, 24 European Union notices 5, 22 F Federal Communications Commission desktops, thin clients and workstations notice 20 desktops, thin clients, workstations cables 20 desktops, thin clients, workstations modifications 20 notebook computers cables 3 notebook computers modifications 3 notebook computers notice 3 G GS Notice 7, 24 H hardware device, identifying 1 headset and earphone volume level notice 27 J Japan material content declaration 39 Japan modem statement 15 Japan notice 8 Japan power cord notice 16 Japan restriction of hazardous substances notice 44 K keyboard notice 27 L laser safety notice 12 M Macrovision Corporation notice Mexico Sustainable Energy Use 16 Law 39 Mexico wireless notice 9 modem notices 12 modem statements Canada 15 Japan 15 New Zealand 15 U.S. 13 modifications, desktops, thin clients, workstations Federal Communications Commission 20 modifications, notebook computers Federal Communications Commission 3 N New Zealand modem statement 15 notices airline travel 11 battery 11, 39 battery, user replacement 26 Brazil 5 Canada 5 China restriction of hazardous substances 36, 42 environmental 35 equipment disposal 35 ergonomics 7, 24 European Union 5, 22 headset and earphone volume level 27 Japan 8 Japan power cord 16 Japan restriction of hazardous substances 44 keyboard 27 laser safety 12 Macrovision Corporation 16 Mexico 9 modem 12 perchlorate material 39 power cords 16, 27 Singapore 9 South Korea 9 Taiwan 10 Thailand WWAN wireless notice 10 travel 27 Ukraine restriction of hazardous substances 39, 44 notices, desktops, thin clients and workstations Federal Communications Commission 20 Index 45 notices, notebook computers Federal Communications Commission 3 P power cord notice 16, 27 R recycling, electronic hardware and battery 35 S Singapore wireless notice 9 South Korea notice 9 T Taiwan notice 10 Thailand WWAN wireless notice travel notice 27 tropical warning notice 28, 33 TV tuner, cable grounding notice 10 28 U U.S. modem statement 13 Ukraine restriction of hazardous substances notice 39, 44 V voice support 16 volume level notice, headset and earphone 27 W wireless LAN devices 4, 21, 22 46 Index

User Guide Product notice Software terms This user guide describes features that are common to most models. Some features may not be available on your tablet. Not all features are available in all editions of Windows. This computer may require upgraded and/or separately purchased hardware, drivers and/or software to take full advantage of Windows functionality. Go to http://www.microsoft.com for details. To obtain the latest user guide, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on-screen instructions. By installing, copying, downloading, or otherwise using any software product preinstalled on this computer, you agree to be bound by the terms of the HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the entire unused product (hardware and software) within 14 days for a refund subject to the refund policy of your seller. For any further information or to request a full refund of the computer, please contact your seller. Copyright 2014 Hewlett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel is a trademark of Intel Corporation in the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Second Edition: May 2014 First Edition: January 2014 Document Part Number: 738070-002 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The tablet and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950). iii iv Safety warning notice Table of contents 1 Welcome ........................................................................................................................................................... 1 Finding information ............................................................................................................................... 2 2 Getting to know your tablet ............................................................................................................................... 4 Front ..................................................................................................................................................... 4 Rear ...................................................................................................................................................... 6 Top ....................................................................................................................................................... 7 Bottom .................................................................................................................................................. 8 Locating system information ................................................................................................................. 8 Changing your tablet's settings ............................................................................................................ 8 Changing your tablet's view ................................................................................................. 8 Using the tablet's autorotate lock feature ............................................................ 8 Adjusting your tablet's screen brightness ............................................................ 9 Finding your hardware and software information ................................................................................. 9 Locating hardware ............................................................................................................... 9 Locating software ................................................................................................................. 9 Updating the software installed on the tablet ....................................................................... 9 3 Connecting to a network ................................................................................................................................. 10 Connecting to a wireless network ....................................................................................................... 10 Using the wireless controls ................................................................................................ 10 Using a WLAN ................................................................................................................... 10 Using an Internet service provider .................................................................... 11 Setting up a WLAN ............................................................................................ 11 Configuring a wireless router ............................................................................ 11 Protecting your WLAN ....................................................................................... 12 Connecting to a WLAN ...................................................................................... 12 Using HP Mobile Broadband (select models only) ............................................................ 13 Inserting and removing a SIM ........................................................................... 13 Using Bluetooth wireless devices ...................................................................................... 15 4 Navigating using touch gestures ..................................................................................................................... 16 Using touch screen gestures .............................................................................................................. 16 One-finger slide ................................................................................................................. 16 Tapping .............................................................................................................................. 17 Scrolling ............................................................................................................................. 17 v 2-finger pinch zoom ........................................................................................................... 18 2-finger click ....................................................................................................................... 18 Rotating (select models only) ............................................................................................ 19 Edge swipes ...................................................................................................................... 19 Right-edge swipe .............................................................................................. 19 Left-edge swipe ................................................................................................. 20 Top-edge swipe ................................................................................................. 20 Using the on-screen keyboard ........................................................................................................... 21 Using the digital pen (select models only) .......................................................................................... 21 5 Multimedia ....................................................................................................................................................... 23 Audio .................................................................................................................................................. 23 Adjusting the volume ......................................................................................................... 23 Connecting headphones .................................................................................................... 23 Checking audio functions on the tablet .............................................................................. 23 Webcam ............................................................................................................................................. 24 6 Power management ........................................................................................................................................ 25 Shutting down the tablet ..................................................................................................................... 25 Setting power options ......................................................................................................................... 25 Using power-saving states ................................................................................................. 25 Initiating and exiting Sleep ................................................................................ 25 Using the power meter and power settings ....................................................... 26 Setting password protection on wakeup ........................................................... 26 Using battery power ........................................................................................................... 26 Factory-sealed battery ...................................................................................... 26 Finding additional battery information ............................................................... 27 Using Battery Check ......................................................................................... 27 Displaying the remaining battery charge ........................................................... 27 Maximizing battery discharge time .................................................................... 27 Managing low battery levels .............................................................................. 27 Identifying low battery levels ............................................................. 28 Resolving a low battery level ............................................................ 28 Conserving battery power ................................................................................. 28 Using external AC power ................................................................................................... 28 7 External cards and devices ............................................................................................................................. 30 Using memory card readers ............................................................................................................... 30 Inserting a memory card .................................................................................................... 30 Removing a memory card .................................................................................................. 30 vi 8 Security ........................................................................................................................................................... 32 Protecting the tablet ........................................................................................................................... 32 Using passwords ................................................................................................................................ 32 Setting passwords in Windows .......................................................................................... 33 Setting passwords in Computer Setup .............................................................................. 33 Using antivirus software ..................................................................................................................... 33 Using firewall software ....................................................................................................................... 33 Installing critical security updates ....................................................................................................... 34 Using HP Client Security .................................................................................................................... 34 9 Maintenance ................................................................................................................................................... 35 Cleaning your tablet ........................................................................................................................... 35 Cleaning products .............................................................................................................. 35 Cleaning procedures .......................................................................................................... 35 Cleaning the display .......................................................................................... 35 Cleaning the sides and cover ............................................................................ 35 Updating programs and drivers .......................................................................................................... 36 Using SoftPaq Download Manager .................................................................................................... 36 10 Backup and recovery .................................................................................................................................... 37 Backing up your information ............................................................................................................... 37 Performing a system recovery ............................................................................................................ 37 Using the Windows recovery tools ..................................................................................... 37 Using f11 recovery tools .................................................................................................... 38 Changing the boot device order ......................................................................................... 38 Using Windows Refresh or Windows Reset ...................................................................... 39 11 Computer Setup and HP PC Hardware Diagnostics (UEFI) ......................................................................... 40 Using Computer Setup ....................................................................................................................... 40 Starting Computer Setup ................................................................................................... 40 Navigating and selecting in Computer Setup ..................................................................... 40 Restoring factory settings in Computer Setup ................................................................... 40 Updating the BIOS ............................................................................................................. 41 Determining the BIOS version ........................................................................... 41 Downloading a BIOS update ............................................................................................. 42 Using HP PC Hardware Diagnostics (UEFI) ...................................................................... 42 12 Support ......................................................................................................................................................... 44 Contacting support ............................................................................................................................. 44 vii 13 Specifications ................................................................................................................................................ 45 Input power ......................................................................................................................................... 45 Operating environment ....................................................................................................................... 45 Appendix A Traveling with the tablet ................................................................................................................. 46 Appendix B Electrostatic discharge ................................................................................................................... 47 Index ................................................................................................................................................................... 48 viii 1 Welcome After you set up and register the tablet, it is important to take the following steps:

Take a minute to browse the printed Windows Basics guide to explore the new Windows features. Connect to the InternetSet up your wireless network so that you can connect to the Internet. For more information, see Connecting to a network on page 10. Update your antivirus softwareProtect your tablet from damage caused by viruses. The software is preinstalled on the tablet. For more information, see Using antivirus software on page 33. Get to know your tabletLearn about your tablet features. Refer to Getting to know your tablet on page 4 and Navigating using touch gestures on page 16 for additional information. Find installed softwareAccess a list of the software preinstalled on the tablet:

On the Start screen, swipe up from the center of the touch screen to display the Apps screen. For details about using the software included with the tablet, see the software manufacturer's instructions, which may be provided with the software or on the manufacturer's website. Back up your hard drive by creating a recovery flash drive. See Backup and recovery on page 37. 1 Finding information The tablet comes with several resources to help you perform various tasks. Resources Setup Instructions poster Windows Basics guide HP Support Assistant To access HP Support Assistant on the Start screen, tap the HP Support Assistant app. To obtain the latest user guide, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on-

screen instructions Regulatory, Safety, and Environmental Notices To access this guide:

1. 2. From the Start screen, type support, and then select the HP Support Assistant app. Select My computer, and then tap User guides. Safety & Comfort Guide To access the user guides, tap the HP Support Assistant app on the Start screen, tap My computer, and then tap User guides. or Go to http://www.hp.com/ergo. For information about How to set up the tablet Help to identify tablet components Overview of using and navigating with Windows 8. Operating system information Software, driver, and BIOS updates Troubleshooting tools How to access support Regulatory and safety information Environmental information Proper workstation setup, posture, health, and work habits Electrical and mechanical safety information Worldwide Telephone Numbers booklet HP support telephone numbers This booklet is provided with your tablet. HP website To obtain the latest user guide, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on-

screen instructions Support information Ordering parts and finding additional help Accessories available for the device Limited Warranty*

Warranty information To access this guide, tap the HP Support Assistant app on the Start screen, tap My computer, and then tap Warranty and services. or Go to http://www.hp.com/go/orderdocuments.

*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your tablet and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited Warranty in the box. For some countries/regions where the warranty is not provided in printed format, you may request a printed copy from http://www.hp.com/go/orderdocuments or write to:

North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA 2 Chapter 1 Welcome Resources For information about Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507 When you request a printed copy of your warranty, please include your product number, warranty period (found on your service label), name, and postal address. IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/go/

contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Finding information 3 2 Getting to know your tablet Front Component Description

(1)

(2)

(3)

(4)

(5)

(6) WWAN antennas (2)* (select models only) Send and receive wireless signals to communicate with wireless wide area networks (WWAN). Front webcam Records video and captures still photographs. WLAN antennas (2)*

Ambient light sensor To use the webcam, tap the YouCam tile on the Start screen, or swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type c, and then tap CyberLink YouCam. Send and receive wireless signals to communicate with wireless local area networks (WLAN). The ambient light sensor automatically adjusts the display brightness based on the lighting conditions in your environment. Webcam status light (front) On: The webcam is on. Near Field Communications (NFC) tapping area (select models only) Allows you to touch an NFC-compatible device to this area to wirelessly connect and communicate with the tablet and transfer data back and forth. 4 Chapter 2 Getting to know your tablet Component

(7) Windows button Description Displays the Start screen.

*The antennas are not visible on the outside of the tablet. For optimal transmission, keep the areas immediately around the antennas free from obstructions. To see wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access the user guides, tap the HP Support Assistant app on the Start screen, tap My computer, and then tap User guides. Front 5 Rear Component Description

(1)

(2)

(3)

(4)

(5)

(6) Micro SD Card Reader/Micro SIM slot access hole Memory card reader/Micro SIM slot Allows you to insert the end of a paper clip to open the access door to insert or remove a micro SD card or micro SIM module. Reads optional micro memory cards that store, manage, share, or access information. and supports an optional wireless micro subscriber identity module (SIM) (select models only). Rear webcam Volume up button Volume down button Regulatory information Records video, captures still photographs, and allows video conferences and online chat by means of streaming video. To use the webcam, tap the YouCam tile on the Start screen, or swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type c, and then tap CyberLink YouCam. To increase speaker volume, press the top edge of the button. To decrease speaker volume, press the bottom edge of the button. Displays regulatory information (select models only). See Locating system information on page 8. 6 Chapter 2 Getting to know your tablet Top Component

(1) Audio-out (headphone) jack/Audio-in

(microphone) jack

(2) Autorotate switch Description Produces sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio. Also connects an optional headset microphone. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety, and Environmental Notices. To access the user guides, tap the HP Support Assistant app on the Start screen, tap My computer, and then tap User guides. NOTE: When a device is connected to the jack, the tablet speakers are disabled. NOTE: Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio-in (microphone). When the tablet is on, slide the autorotate switch to lock the autorotate feature of the display. To unlock the autorotate feature, slide the switch again. or Swipe from the right edge of the touch screen to display the charms, tap Settings, tap the screen icon, and then tap the autorotate icon. To unlock the autorotate feature, tap the autorotate icon again.

(3)

(4) Integrated microphones (2) Record sound. Power button When the tablet is off, press the button to turn on the tablet. When the tablet is on, press the button briefly to initiate Sleep. When the tablet is in the Sleep state, press the button briefly to exit Sleep. CAUTION: Pressing and holding down the power button will result in the loss of unsaved information. If the tablet has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the tablet. To learn more about your power settings, see your power options. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type power, select Power and sleep settings, and then select Power and sleep from the list of applications. Top 7 Bottom Component

(1)

(2)

(3) Speakers (2) Product and regulatory information Docking connector Description Produce sound. Displays product and regulatory information (select models only). See Locating system information on page 8 Connects an AC adapter or an optional docking device. Locating system information Important system information is located on the bottom edge or the rear of the tablet (select models only). You may need the information when travelling internationally or when you contact support:

Serial number Product number Regulatory information Changing your tablet's settings You can change view and screen brightness. Changing your tablet's view Your tablet's orientation, or view, changes automatically from landscape to portrait view, or from portrait to landscape view. 1. To change the view of your tablet from landscape view to portrait view:

Hold the tablet vertically, and then turn it 90 degrees to the right (in a clockwise direction). To change the view of your tablet from portrait view to landscape view:

Hold the tablet vertically, and then turn it 90 degrees to the left (in a counter-clockwise direction). 2. Using the tablet's autorotate lock feature To turn on your tablet's autorotate lock feature:

8 Chapter 2 Getting to know your tablet Slide the autorotate switch on the top edge of the tablet. 1. 2. or Swipe from the right edge of the touch screen to display the charms, and then tap Settings. Tap the screen icon to lock your current tablet screen in place and to prevent rotation. The icon displays a lock symbol when the autorotate lock is active. To turn off your tablet's autorotate lock feature:

Slide the autorotate switch on the top edge of the tablet again. or Swipe from the right edge of the touch screen to display the charms, and then tap Settings. Tap the Screen icon at the bottom right, and then tap the autorotate lock icon again. 1. 2. Adjusting your tablet's screen brightness To adjust the screen brightness:

1. 2. Swipe from the right edge of the touch screen to display the charms, and then tap Settings. Tap the Screen icon at the bottom right. A vertical slider displays that controls the screen brightness. NOTE: On the Windows desktop, you can also tap the Power Meter icon in the notification area at the far right of the taskbar, tap Adjust screen brightness, and then move the slider next to Screen brightness at the bottom of the screen. Finding your hardware and software information Locating hardware To find out what hardware is installed on your tablet:

1. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type device manager, and then tap Device Manager. A list displays all the devices installed on your tablet. 2. Locating software To find out what software is installed on your tablet, on the Start screen, swipe up from the center of the touch screen to display the Apps screen. Updating the software installed on the tablet Most software, including the operating system, is updated frequently by the manufacturer or provider. Important updates to the software included with the tablet may have been released since the tablet left the factory. Some updates may affect the way the tablet responds to optional software or external devices. Many updates provide security enhancements. Update the operating system and other software installed on the tablet as soon as the tablet is connected to the Internet. Access the updates on the HP website at http://www.hp.com. Finding your hardware and software information 9 3 Connecting to a network Your tablet can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites using your tablet and a wireless network connection. This chapter will help you get connected to that world. Connecting to a wireless network Wireless technology transfers data across radio waves instead of wires. Your tablet may be equipped with one or more of the following wireless devices:

Wireless local area network (WLAN) deviceConnects the tablet to wireless local area networks

(commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your tablet communicates with a wireless router or a wireless access point. Bluetooth deviceCreates a personal area network (PAN) to connect to other Bluetooth-

enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device communicates directly with other devices, and devices must be relatively close togethertypically within 10 meters (approximately 33 feet) of each other. For more information about wireless technology, see the information and website links provided in HP Support Assistant. To access HP Support Assistant, on the Start screen, tap the HP Support Assistant app. Using the wireless controls The Network and Sharing Center allows you to set up a connection or network, connect to a network, manage wireless networks, and diagnose and repair network problems. To use operating system controls:

1. Swipe from the right edge of the touch screen to display the charms, tap Settings, and then tap Control Panel. Select Network and Internet, and then tap Network and Sharing Center. 2. For more information, access HP Support Assistant. To access HP Support Assistant, on the Start screen, tap the HP Support Assistant app. Using a WLAN With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories that are linked by a wireless router or a wireless access point. NOTE: The terms wireless router and wireless access point are often used interchangeably. 10 Chapter 3 Connecting to a network A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points that can accommodate a large number of computers and accessories and can separate critical network functions. A home or small office WLAN typically uses a wireless router, which allows several wireless and wired computers to share an Internet connection, a printer, and files without requiring additional pieces of hardware or software. To use the WLAN device in your tablet, you must connect to a WLAN infrastructure (provided through a service provider or a public or corporate network). Using an Internet service provider When you are setting up Internet access in your home, you must establish an account with an Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless tablet to the modem, and test the Internet service. NOTE: Your ISP will give you a user ID and a password to use for Internet access. Record this information and store it in a safe place. Setting up a WLAN To set up a WLAN and connect to the Internet, you need the following equipment:

A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider A wireless router (2) (purchased separately) A wireless tablet (3) NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what type of modem you have. The illustration below shows an example of a wireless network installation that is connected to the Internet. As your network grows, additional wireless and wired computers can be connected to the network to access the Internet. For help in setting up your WLAN, see the information provided by your router manufacturer or your ISP. Configuring a wireless router For help in setting up a WLAN, see the information provided by your router manufacturer or your ISP. It is recommended that you initially connect your new wireless tablet to the router by using NOTE:

the network cable provided with the router. When the tablet successfully connects to the Internet, disconnect the cable, and access the Internet through your wireless network. Connecting to a wireless network 11 Protecting your WLAN When you set up a WLAN or access an existing WLAN, always enable security features to protect your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and airports may not provide any security. If you are concerned about the security of your tablet in a hotspot, limit your network activities to email that is not confidential and basic Internet surfing. Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected signals. Take the following precautions to protect your WLAN:

Use a firewall. A firewall checks both data and requests for data that are sent to your network, and discards any suspicious items. Firewalls are available in both software and hardware. Some networks use a combination of both types. Use wireless encryption. Wireless encryption uses security settings to encrypt and decrypt data that is transmitted over the network. For more information, access HP Support Assistant. To access HP Support Assistant, on the Start screen, tap the HP Support Assistant app. Connecting to a WLAN To connect to the WLAN, follow these steps:

1. 2. On the Start screen, swipe from the right edge of the touch screen to display the charms, tap Be sure that the WLAN device is on. Settings, and then tap the network icon. or On the Windows desktop, tap the network status icon in the notification area, at the far right of the taskbar. Be sure that airplane mode is off, select a WLAN from the list, and then tap Connect. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the code, and then tap Sign in. 3. NOTE:

If no WLANs are listed, you may be out of range of a wireless router or access point. If you do not see the WLAN you want to connect to, on the Start screen, swipe from the NOTE:

right edge of the touch screen to display the charms, tap Search, tap in the Search box, type network and sharing, and then select Network and Sharing Center, or on the Windows desktop, tap and hold the network status icon, and then tap Open Network and Sharing Center. Tap Set up a new connection or network. A list of options is displayed, allowing you to manually search for and connect to a network or to create a new network connection. Follow the on-screen instructions to complete the connection. 4. After the connection is made, tap the network status icon in the notification area, at the far right of the taskbar, to verify the name and status of the connection. NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors. 12 Chapter 3 Connecting to a network Using HP Mobile Broadband (select models only) HP Mobile Broadband enables your tablet to use WWANs to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a mobile network operator), which in most cases is a cellular phone network operator. Coverage for HP Mobile Broadband is similar to cellular phone voice coverage. If your tablet has HP Mobile Broadband, it is also equipped with Global Positioning System (GPS) functionality. GPS satellites deliver location, speed, and direction information to GPS-equipped systems. When used with mobile network operator service, HP Mobile Broadband gives you the freedom to stay connected to the Internet, send email, or connect to your corporate network whether you are on the road or outside the range of Wi-Fi hotspots. HP supports the following technologies:

HSPA (High Speed Packet Access), which provides access to networks based on the Global System for Mobile Communications (GSM) telecommunications standard. EV-DO (Evolution Data Optimized), which provides access to networks based on the code division multiple access (CDMA) telecommunications standard. LTE (Long Term Evolution), which provides access to networks supporting LTE technology. You may need the HP Mobile Broadband Module serial number to activate mobile broadband service. The serial number is etched on the rear of your tablet. Some mobile network operators require the use of a SIM. A SIM contains basic information about you, such as a personal identification number (PIN), as well as network information. Some tablets include a SIM that is preinstalled. If the SIM is not preinstalled, it may be provided in the HP Mobile Broadband information provided with your tablet, or the mobile network operator may provide it separately from the tablet. For information about inserting and removing the SIM, see Inserting and removing a SIM on page 13 in this chapter. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband information included with your tablet. Inserting and removing a SIM CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM. To insert or remove a SIM, follow these steps:

1. 2. Disconnect all external devices connected to the tablet. 3. Unplug the power cord from the AC outlet. Shut down the tablet. Connecting to a wireless network 13 4. Insert the end of a paper clip into the Micro SIM slot access hole (1), and then open the access door (2). 5. 6. Insert the SIM into the SIM slot (3), and then push to lock it. or Push the SIM again to remove it from the SIM slot. Insert the door hinge (1), and then close the access door (2). 7. Reconnect external power. 8. Reconnect external devices. 9. Turn on the tablet. 14 Chapter 3 Connecting to a network Using Bluetooth wireless devices A Bluetooth device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as the following:

Computers (desktop, notebook, PDA) Phones (cellular, cordless, smart phone) Imaging devices (printer, camera) Audio devices (headset, speakers) Mouse Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network

(PAN) of Bluetooth devices. For information about configuring and using Bluetooth devices, see the Bluetooth software Help. Connecting to a wireless network 15 4 Navigating using touch gestures Your tablet allows navigation using touch gestures on the touch screen. Review the Windows Basics guide included with your tablet. The guide provides information on common tasks using the touch screen or an optional keyboard. Using touch screen gestures You can control items on the touch screen directly with your fingers. One-finger slide The one-finger slide is mostly used to pan or scroll through lists and pages, but you can use it for other interactions, too, such as moving an object. To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. NOTE: When many apps are displayed on the Start screen, you can slide your finger to move the screen left or right. To drag, press and hold an object, and then drag the object to move it. 16 Chapter 4 Navigating using touch gestures Tapping To make an on-screen selection, use the tap function. Use one finger to tap an object on the screen to make a selection. Double-tap an item to open it. NOTE:

information about the object. Press and hold your finger on an object to open a help screen that provides Scrolling Scrolling is useful for moving the pointer up, down, left, or right on a page or image. Place two fingers on the screen and then drag them in an up, down, left, or right motion. Using touch screen gestures 17 2-finger pinch zoom 2-finger pinch zoom allows you to zoom out or in on images or text. Zoom in by placing two fingers together on the display and then moving your fingers apart. Zoom out by placing two fingers apart on the display and then moving your fingers together. 2-finger click 2-finger click allows you to make menu selections for an object on the screen. NOTE: Using 2-finger click is the same action as using right-click with a mouse. Place two fingers on the TouchPad zone and press to open the options menu for the selected object. 18 Chapter 4 Navigating using touch gestures Rotating (select models only) Rotating allows you to turn items such as photos. Anchor the forefinger of your left hand on the object you want to rotate. Using your right hand, slide your forefinger around in a sweeping motion from 12 oclock to 3 oclock. To reverse the rotation, move your forefinger from 3 oclock to 12 oclock. NOTE: Rotate is intended for specific apps where you can manipulate an object or image. Rotate may not be functional for all apps. Edge swipes Edge swipes allow you to access toolbars on your tablet for tasks such as changing settings and finding or using apps. Right-edge swipe The right-edge swipe reveals the charms, which let you search, share, start apps, access devices, or change settings. Swipe your finger gently from the right edge to reveal the charms. Using touch screen gestures 19 Left-edge swipe The left-edge swipe reveals your open apps so that you can switch between them quickly. Swipe your finger gently from the left edge to switch between apps. Without lifting your finger, swipe back toward the left edge to display all open apps. Top-edge swipe The top-edge swipe displays app command options that allow you to customize apps. Gently swipe finger from the top edge to reveal the app command options. 20 Chapter 4 Navigating using touch gestures Using the on-screen keyboard You may want to enter data into a data field. This may be required when you set up a wireless network configuration or a weather reporting location, or when you access user accounts on Internet sites. The tablet has an on-screen keyboard that is displayed when you need to enter such information into data fields. 1. To display the keyboard on the Start screen, tap in the first data field. The keyboard is displayed. or To display the keyboard on the Windows desktop, tap the keyboard icon in the navigation area, at the far right of the taskbar. Tap each character, continuing until you have spelled out the name or word that you are entering into the data field. 2. NOTE: Suggested words may be displayed at the top of the keyboard. If an appropriate word is displayed, tap to select it. Tap enter on the keyboard. 3. To change settings for the on-screen keyboard:

1. 2. Swipe from the right side of the touch screen to display the charms, and then tap Settings. Tap Change PC settings, tap PC and devices, tap Typing, and then follow the on-screen instructions. Using the digital pen (select models only) To insert the battery in the pen:

1. Unscrew the pen to disassemble it. 2. Remove the old battery and recycle it properly. 3. Install the new battery. Using the on-screen keyboard 21 Securely reassemble the pen. 4. 5. Wait 2 seconds for the pen to calibrate automatically. NOTE: Pressing the tip of the pen during the 2-second calibration cycle invalidates the process and requires that you recalibrate the pen. The digital pen is now ready to use with your tablet. Simply touch the tip of the pen lightly on the screen to write text or select items on the screen. To perform a right-click action, press the button on the side of the pen when selecting an item on the screen. The digital pen uses inherent pressure sensitivity, so you can create a bolder stroke by pressing harder on the screen with the digital pen. Pressure sensitivity may not be enabled or supported, depending on the application or program. To change pen settings, such as pen sensitivity, swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type c, and then tap Control Panel. Tap Hardware and Sound, tap Pen and Touch, and then follow the on-screen instructions. NOTE: For regulatory and safety information, refer to the Regulatory, Safety, and Environmental Notices on the HP tablet. To access this guide, tap the HP Support Assistant app on the Start screen, tap My Computer, and then tap User guides. 22 Chapter 4 Navigating using touch gestures 5 Multimedia Your tablet may include the following:

Integrated speaker(s) Integrated microphone(s) Integrated webcam(s) Preinstalled multimedia software Multimedia buttons or keys Audio On your HP tablet, you can download and listen to music, stream audio content from the web

(including radio), record audio, or mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio devices such as speakers or headphones. Adjusting the volume You can adjust the volume using the volume buttons. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. To access the user guides, tap the HP Support Assistant app on the Start screen, tap My computer, and then tap User guides. NOTE: Volume can also be controlled through the operating system and some programs. NOTE: Refer to the Getting to know your tablet on page 4 section for information on what type of volume controls your tablet has. Connecting headphones You can connect wired headphones to the headphone jack on your tablet. See Top on page 7. To connect wireless headphones to your tablet, follow the device manufacturer's instructions. WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental Notices. Checking audio functions on the tablet NOTE: For best results when recording, speak directly into the microphone and record sound in a setting free of background noise. Audio 23 To check the audio functions on your tablet, follow these steps:

1. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type c, and then tap Control Panel. Tap Hardware and Sound, and then tap Sound. When the Sound window opens, tap the Sounds tab. Under Program Events, tap any sound event, such as a beep or alarm and then tap Test. You should hear sound through the speakers or through connected headphones. 2. 3. To check the recording functions on your tablet, follow these steps:

1. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box In the search box, type so, and then tap Sound Recorder. Tap Start Recording and speak into the microphone. Save the file to your Windows desktop. 2. 3. 4. 5. Open a multimedia program and play back the recording. To confirm or change the audio settings on your tablet:

1. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type c, and then tap Control Panel. Tap Hardware and Sound, and then tap Sound. 2. 3. Webcam Some tablets include two integrated webcams. With the preinstalled software, you can use the webcams to take a photo or record a video. You can preview and save the photo or video recording. The webcam software enables you to experiment with the following features:

Capturing and sharing video Streaming video with instant message software Taking still photos For details about using the webcam, refer to the help for the app. 24 Chapter 5 Multimedia 6 Power management NOTE: Your tablet has a power button. Shutting down the tablet CAUTION: Unsaved information is lost when the tablet shuts down. The shutdown command closes all open programs, including the operating system, and then turns off the tablet. Shut down the tablet when the tablet will be unused and disconnected from external power for an extended period Although you can turn off the tablet with the power button, the recommended procedure is to use the Windows shutdown command:

If the tablet is in the Sleep state, you must first exit Sleep before shutdown is possible by NOTE:

briefly pressing the power button. 1. 2. Save your work and close all open programs. Swipe from the right edge of the touch screen to display the charms, tap Settings, tap the Power icon, and then tap Shut down. If the tablet is unresponsive and you are unable to use the preceding shutdown procedure, try the following emergency procedures in the sequence provided:

Press and hold the power button for at least 5 seconds. Disconnect the tablet from external power. Setting power options Using power-saving states Sleep is enabled at the factory. When Sleep is initiated, the screen clears, and your work is saved to memory. CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a disc or an external media card. Initiating and exiting Sleep With the tablet on, you can initiate Sleep in any of the following ways:

Briefly press the power button. Swipe from the right edge of the touch screen to display the charms, tap Settings, tap the Power icon, and then tap Sleep. To exit Sleep, briefly press the power button. Shutting down the tablet 25 When the tablet exits Sleep, the tablet returns to the screen where you stopped working. NOTE:

password before the tablet will return to the screen. If you have set a password to be required on wakeup, you must enter your Windows Using the power meter and power settings The power meter is located on the Windows desktop. The power meter allows you to quickly access power settings and view the remaining battery charge. To display the percentage of remaining battery charge and the current power plan, on the Windows desktop, tap the power meter icon. To use Power Options, or to change the power plan, tap the power meter icon, and then tap an item from the list. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type power, tap Settings, and then tap Power Options. Different power meter icons indicate whether the tablet is running on battery or external power. The icon also displays a message if the battery has reached a low or critical battery level. Setting password protection on wakeup To set the tablet to prompt for a password when the tablet exits Sleep, follow these steps:

1. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type power, tap Settings, and then tap Power Options. In the left pane, tap Require a password on wakeup. Tap Change Settings that are currently unavailable. Tap Require a password (recommended). NOTE:

If you need to create a user account password or change your current user account password, tap Create or change your user account password, and then follow the on-screen instructions. If you do not need to create or change a user account password, go to step 5. Tap Save changes. 2. 3. 4. 5. 6. Using battery power The tablet runs on battery power whenever it is not plugged into external AC power. Tablet battery life varies, depending on power management settings, running programs, display brightness, external devices connected to the tablet, and other factors. When the tablet is plugged into AC power, the battery is charged and your work is protected in case of a power outage. If the battery is charged and the tablet is running on external AC power, the tablet automatically switches to battery power if the AC adapter is disconnected on the tablet or an AC power loss occurs. NOTE: When you disconnect AC power, the display brightness is automatically decreased to save battery life. For more information, see Using external AC power on page 28. Factory-sealed battery To monitor the status of your battery, or if the battery is no longer holding a charge, run Battery Check in HP Support Assistant. To access battery information, tap the HP Support Assistant app on the Start screen, and then tap Battery and performance. If Battery Check indicates that your battery should be replaced, contact support. 26 Chapter 6 Power management The battery(ies) in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support. When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal. Finding additional battery information HP Support Assistant provides the tools and information about the battery. To access battery information, tap the HP Support Assistant app on the Start screen, and then tap Battery and performance. Battery Check tool to test battery performance Information on calibration, power management, and proper care and storage to maximize battery life Information on battery types, specifications, life cycles, and capacity Using Battery Check HP Support Assistant provides information on the status of the battery installed in the tablet. To run Battery Check:

1. Connect the AC adapter to the tablet. NOTE: The tablet must be connected to external power for Battery Check to work properly. 2. To access battery information, tap the HP Support Assistant app on the Start screen, and then tap Battery and performance. Battery Check examines the battery and its cells to see if they are functioning properly, and then reports the results of the examination. Displaying the remaining battery charge Tap the power meter icon on the Windows desktop in the notification area, at the far right of the taskbar. Maximizing battery discharge time Battery discharge time varies depending on features you use while on battery power. Maximum discharge time gradually decreases as the battery storage capacity naturally degrades. To maximize battery discharge time, lower the brightness on the display. Managing low battery levels The information in this section describes the alerts and system responses set at the factory. Some low-battery alerts and system responses can be changed using Power Options. Preferences set using Power Options do not affect lights. 1. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type power, and then tap Power Options. 2. Setting power options 27 Identifying low battery levels When a battery that is the sole power source for the tablet reaches a low or critical battery level, the following behavior occurs:

On the Windows desktop, the power meter icon in the notification area shows a low or critical battery notification. NOTE: For additional information about the power meter, see Using the power meter and power settings on page 26. If the tablet is on or in the Sleep state, the tablet remains briefly in the Sleep state, and then shuts down and loses any unsaved information. Resolving a low battery level Resolving a low battery level when external power is available Connect one of the following devices:

AC adapter Optional docking or expansion device Optional power adapter purchased as an accessory from HP Resolving a low battery level when no power source is available To resolve a low battery level when no power source is available, save your work and shut down the tablet. Conserving battery power Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type power, tap Settings, and then tap Power Options. Select low power-use settings through Power Options. Turn off wireless and LAN connections when you are not using them. Disconnect unused external devices that are not plugged into an external power source. Stop, disable, or remove any external media cards that you are not using. Decrease screen brightness. Before you leave your work, initiate Sleep, or shut down the tablet. Using external AC power WARNING! Do not charge the tablet battery while you are onboard aircraft. WARNING! To reduce potential safety issues, use only the AC adapter provided with the tablet, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. NOTE: For information on connecting to AC power, see the Setup Instructions poster provided in the tablet box. External AC power is supplied through an approved AC adapter or an optional docking or expansion device. Connect the tablet to external AC power under any of the following conditions:

28 Chapter 6 Power management When charging a battery When installing or modifying system software When running Disk Defragmenter When performing a backup or recovery When you connect the tablet to external AC power, the following events occur:

The battery begins to charge. If the tablet is turned on, the power meter icon in the notification area changes appearance. When you disconnect external AC power, the following events occur:

The tablet switches to battery power. The display brightness is automatically decreased to save battery life. Setting power options 29 7 External cards and devices Using memory card readers Optional memory cards provide secure data storage and convenient data sharing. These cards are often used with digital media-equipped cameras and PDAs as well as with other computers. To determine the memory card formats that are supported on your tablet, see the Getting to know your tablet on page 4 section. Inserting a memory card CAUTION: To reduce the risk of damage to the memory card connectors, use minimal force to insert a memory card. 1. 2. Hold the card label-side up, with the connectors facing the tablet, and insert the card in the slot. To open the access door, see Inserting and removing a SIM on page 13. Push the card to lock it. 3. 4. Close the access door. See Inserting and removing a SIM on page 13. Removing a memory card CAUTION: To reduce the risk of loss of data or an unresponsive system, use the following procedure to safely remove the memory card. 1. 2. Save your information and close all programs associated with the memory card. Tap the remove hardware icon on the Windows desktop in the notification area, at the far right of the taskbar. Then follow the on-screen instructions. To open the access door, see Inserting and removing a SIM on page 13 3. 30 Chapter 7 External cards and devices 4. Push in on the card (1), and then remove it from the slot (2). 5. Close the access door. Using memory card readers 31 8 Security Protecting the tablet Standard security features provided by the Windows operating system and Computer Setup can protect your personal settings and data from a variety of risks. NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. NOTE: Before you send your tablet for service, back up and delete confidential files, and remove all password settings. NOTE: Some features listed in this chapter may not be available on your tablet. NOTE: Your tablet supports Absolute Data Protect. If your tablet is lost or stolen, it can be located and locked, and personal data can be deleted from a remote location. The tablet must be connected to the Internet. Tablet risk Unauthorized use of the tablet Unauthorized access to Computer Setup and other system identification information Security feature HP Client Security, in combination with a password or other authentication credential BIOS administrator password in Computer Setup Unauthorized startup from an optional external flash drive Boot options feature in Computer Setup Unauthorized access to a Windows user account Windows user password Unauthorized access to data HP Drive Encryption software Windows Defender Using passwords A password is a group of characters that you choose to secure your tablet information. Several types of passwords can be set, depending on how you want to control access to your information. Passwords can be set in Windows or in Computer Setup that is preinstalled on the tablet. Setup passwords are set in Computer Setup and are managed by the system BIOS. Windows passwords are set only in the Windows operating system. Use the following tips for creating and saving passwords:

When creating passwords, follow requirements set by the program. Do not use the same password for multiple applications or websites, and do not reuse your Windows password for any other application or website. 32 Chapter 8 Security Use HP Password Manager to store all of your user names and passwords for all of your websites and applications. You can securely read them in the future if they cannot be remembered. Do not store passwords in a file on the tablet. The following tables list commonly used Windows and BIOS administrator passwords and describe their functions. Setting passwords in Windows Password Administrator password*

Function Protects access to a Windows administrator-level account. NOTE: Setting the Windows Administrator password does not set the BIOS Administrator password. User password*

Protects access to a Windows user account.

*For information about setting a Windows administrator password or a Windows user password, access HP Support Assistant. To access HP Support Assistant, on the Start screen, tap the HP Support Assistant app. Setting passwords in Computer Setup Password Function BIOS administrator password Protects access to Computer Setup. Using antivirus software When you use the tablet to access email, a network, or the Internet, you potentially expose it to computer viruses. Computer viruses can disable the operating system, programs, or utilities, or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and, in most cases, repair any damage they have caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to date. Windows Defender, which includes antivirus features, is preinstalled on your tablet. It is strongly recommended that you continue to use an antivirus program in order to fully protect your tablet. For more information about viruses, access HP Support Assistant. To access HP Support Assistant, on the Start screen, tap the HP Support Assistant app. Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be a software program you install on your tablet and/or network, or it can be a solution made up of both hardware and software. There are two types of firewalls to consider:

Using antivirus software 33 Host-based firewallsSoftware that protects only the computer it is installed on. Network-based firewallsInstalled between your DSL or cable modem and your home network to protect all the computers on the network. When a firewall is installed on a system, all data sent to and from the system is monitored and compared with a set of user-defined security criteria. Any data that does not meet those criteria is blocked. Windows Defender is installed on your tablet. NOTE: Under some circumstances a firewall can block access to Internet games, interfere with printer or file sharing on a network, or block authorized email attachments. To permanently resolve the problem, reconfigure the firewall. To temporarily resolve the problem, disable the firewall, perform the task that you want to perform, and then reenable the firewall. Installing critical security updates CAUTION: Microsoft sends out alerts regarding critical updates. To protect the tablet from security breaches and computer viruses, install all critical updates from Microsoft as soon as you receive an alert. You can choose whether updates are installed automatically. To change the settings, on the Start screen, swipe from the right side of the screen, tap Settings, and then tap Control Panel. Tap System and Security, tap Windows Update, tap Change settings, and then follow the on-screen instructions. Using HP Client Security HP Client Security software is preinstalled on your tablet. This software can be accessed through the HP Client Security tile on the Start screen, the icon on the Windows desktop in the notification area, at the far right of the taskbar, and Windows Control Panel. It provides security features that help protect against unauthorized access to the computer, networks, and critical data. For more information, see the HP Client Security software Help. 34 Chapter 8 Security 9 Maintenance Cleaning your tablet Cleaning products Use the following products to safely clean and disinfect your tablet:

Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (For example:

germicidal disposable wipes. These wipes come in a variety of brand names.) Alcohol-free glass cleaning fluid Water with mild soap solution Dry microfiber cleaning cloth or a chamois (static-free cloth without oil) Static-free cloth wipes CAUTION: Avoid the following cleaning products:

Strong solvents, such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons, which can permanently damage the surface of the tablet. Fibrous materials, such as paper towels, which can scratch the tablet. Over time, dirt particles and cleaning agents can get trapped in the scratches. Cleaning procedures Follow the procedures in this section to safely clean your tablet. WARNING! To prevent electric shock or damage to components, do not attempt to clean your tablet while it is turned on:

Shut down the tablet. Disconnect external power. Disconnect all powered external devices. CAUTION: Do not spray cleaning agents or liquids directly on any tablet surface. Liquids dripped on the surface can permanently damage internal components. Cleaning the display Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that the display is dry before closing the display. Cleaning the sides and cover To clean and disinfect the sides and cover, use a soft microfiber cloth or chamois moistened with one of the cleaning solutions listed previously or use an acceptable germicidal disposable wipe. NOTE: When cleaning the cover of the tablet, use a circular motion to aid in removing dirt and debris. Cleaning your tablet 35 Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis with the latest versions. Go to http://www.hp.com/support to download the latest versions. You can also register to receive automatic update notifications when they become available. Using SoftPaq Download Manager HP SoftPaq Download Manager (SDM) is a tool that provides quick access to SoftPaq information for HP business computers without requiring the SoftPaq number. Using this tool, you can easily search for SoftPaqs, and then download and unpack them. SoftPaq Download Manager works by reading and downloading, from the HP FTP site, a published database file containing computer model and SoftPaq information. SoftPaq Download Manager allows you to specify one or more computer models to determine which SoftPaqs are available for download. SoftPaq Download Manager checks the HP FTP site for updates to the database and software. If updates are found, they are downloaded and applied automatically. SoftPaq Download Manager is available on the HP website. To use SoftPaq Download Manager to download SoftPaqs, you must first download and install the program. Go to the HP website at http://www.hp.com/go/sdm, and then follow the instructions to download and install SoftPaq Download Manager. To download SoftPaqs:

1. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type softpaq, and then tap HP SoftPaq Download Manager. Follow the instructions to download SoftPaqs. 2. NOTE:

If prompted by User Account Control, tap Yes. 36 Chapter 9 Maintenance 10 Backup and recovery To protect your information, use Windows backup and restore utilities to back up individual files and folders, back up your entire hard drive, create system repair media (select models only) by using an optional external flash drive, or an optional external optical drive, or create system restore points. In case of system failure, you can use the backup files to restore the contents of your tablet. 1. Swipe from the right edge of the touch screen to display the charms, tap Search, and then tap the search box. In the search box, type restore, and then select from the list of displayed options. 2. NOTE: For detailed instructions on various backup and restore options, perform a search for these topics in Windows Help and Support. In case of system instability, HP recommends that you print the recovery procedures and save them for later use. NOTE: Windows includes the User Account Control feature to improve the security of your tablet. You may be prompted for your permission or password for tasks such as installing software, running utilities, or changing Windows settings. For more information, see Windows Help and Support. Backing up your information Recovery after a system failure is as good as your most recent backup. You should create system repair media and your initial backup immediately after initial system setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. For more information on the Windows backup features, see Windows Help and Support. Performing a system recovery In case of system failure or instability, the computer provides the following tools to recover your files:

Windows recovery tools: You can use Windows Backup and Restore to recover information you have previously backed up. You can also use Windows Automatic Repair to fix problems that might prevent Windows from starting correctly. f11 recovery tools: You can use the f11 recovery tools to recover your original hard drive image. The image includes the Windows operating system and software programs installed at the factory. NOTE:

you previously created (select models only), contact support. If you are unable to boot (start up) your tablet and you cannot use the system repair media Using the Windows recovery tools To recover information you previously backed up, see Windows Help and Support for steps on restoring files and folders. To recover your information using Automatic Repair, follow these steps:

Backing up your information 37 CAUTION: Some Startup Repair options will completely erase and reformat the hard drive. All files you have created and any software installed on the computer are permanently removed. When reformatting is complete, the recovery process restores the operating system, as well as the drivers, software, and utilities from the backup used for recovery. NOTE: An external keyboard, mouse, and external flash drive may be required to perform this procedure. 1. 2. If possible, back up all personal files. If possible, check for the presence of the Recovery Image partition and the Windows partition. Swipe from the right edge of the touch screen, tap Search, and then tap the search box. Type file, and then tap File Explorer. If the Windows partition and the Recovery Image partition are listed, shut down the tablet. To power on the tablet, press the Power button and Volume down button simultaneously. The Startup menu is displayed. Select Troubleshoot, select Advanced Options, and then select Startup Repair. Follow the on-screen instructions. 3. 4. 5. 6. NOTE: For additional information on recovering information using the Windows tools, perform a search for these topics in Windows Help and Support. Using f11 recovery tools CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files that you have created and any software that you have installed on the tablet are permanently removed. The f11 recovery tool reinstalls the operating system, drivers, Windows updates, and language packs that were installed at the factory. All other software applications must be downloaded from HP.com or the Windows Store. NOTE: An external keyboard, mouse, and external flash drive may be required to perform this procedure. To recover the original hard drive image using f11:

1. 2. If possible, back up all personal files. If possible, check for the presence of the HP Recovery partition: Swipe from the right edge of the touch screen, tap Search, and then tap the search box. Type pc, and then tap This PC. If the HP Recovery partition is listed, shut down the tablet. To power on the tablet, press the Power button and Volume down button simultaneously. The Startup menu is displayed. Tap F11 HP Recovery, and then follow the on-screen instructions. 3. 4. 5. Changing the boot device order To change the boot order so that you can boot from an external device:

NOTE: An external flash drive is required to perform this procedure. 1. 2. If possible, back up all personal files. Shut down the tablet. 38 Chapter 10 Backup and recovery 3. Connect the external flash drive. 4. To power on the tablet, press the Power button and Volume down button simultaneously. The Startup menu is displayed. Tap F9 Boot Options. Select the external flash drive as the boot device. 5. 6. 7. Restart the tablet. Using Windows Refresh or Windows Reset When your tablet is not working properly and you need to regain system stability, the Windows Refresh option allows you to start fresh and keep what is important to you. The Windows Reset option allows you to perform detailed reformatting of your tablet, or remove personal information before you give away or recycle your tablet. For more information on these features, see Windows Help and Support. Performing a system recovery 39 11 Computer Setup and HP PC Hardware Diagnostics (UEFI) Using Computer Setup Computer Setup, or F10 BIOS Setup (Basic Input/Output System), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup includes settings for the types of devices installed, the startup sequence of the tablet, and the amount of system and extended memory. NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the tablet from operating properly. Starting Computer Setup To start Computer Setup, follow these steps:

1. 2. Shut down the tablet. To power on the tablet, press the Power button and Volume down button simultaneously. The Startup menu is displayed. Press f10 to enter Computer Setup. 3. Navigating and selecting in Computer Setup To navigate and select in Computer Setup, follow these steps:

1. 2. Shut down the tablet. To power on the tablet, press the Power button and Volume down button simultaneously. The Startup menu is displayed. Press f10 to enter Computer Setup. Tap a menu or a menu item to select it. To close open dialog boxes and return to the main Computer Setup screen, tap Escape, and then follow the on-screen instructions. To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and Exit, and then follow the on-screen instructions. To save your changes and exit, select Main, select Save Changes and Exit, and then follow the on-screen instructions. 3. 4. 5. Restoring factory settings in Computer Setup NOTE: Restoring defaults will not change the hard drive mode. 40 Chapter 11 Computer Setup and HP PC Hardware Diagnostics (UEFI) To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

1. 2. Shut down the tablet. To power on the tablet, press the Power button and Volume down button simultaneously. The Startup menu is displayed. Press f10 to enter Computer Setup. Select Main, and then tap Restore Defaults. Follow the on-screen instructions. To save your changes and exit, select Save Changes and Exit, and then follow the on-screen instructions. Your changes go into effect when the computer restarts. 3. 4. 5. 6. NOTE: Your password settings and security settings are not changed when you restore the factory settings. Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file. Determining the BIOS version To determine whether available BIOS updates contain later BIOS versions than those currently installed on the tablet, you need to know the version of the system BIOS currently installed. To display BIOS version information (also known as ROM date and System BIOS), see Using Computer Setup on page 40. 1. 2. Shut down the tablet. To power on the tablet, press the Power button and Volume down button simultaneously. The Startup menu is displayed. Press f10 to enter Computer Setup. Select Main, and then select System Information. Follow the on-screen instructions. To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and Exit, and then follow the on-screen instructions. 3. 4. 5. 6. Using Computer Setup 41 Downloading a BIOS update CAUTION: To reduce the risk of damage to the tablet or an unsuccessful installation, download and install a BIOS update only when the tablet is connected to reliable external power using the AC adapter. Do not download or install a BIOS update while the tablet is running on battery power, docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions:

Do not disconnect power on the tablet by unplugging the power cord from the AC outlet. Do not shut down the tablet or initiate Sleep. Do not insert, remove, connect, or disconnect any device, cable, or cord. 1. 2. 3. 4. To access HP Support Assistant on the Start screen, tap the HP Support Assistant app. Tap Updates and tune-ups, and then tap Check for HP updates now. Follow the on-screen instructions. At the download area, follow these steps:

a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your tablet. Make a note of the date, name, or other identifier. You may need this information to locate the update later, after it has been downloaded to your hard drive. Follow the on-screen instructions to download your selection to the hard drive. If the update is more recent than your BIOS, make a note of the path to the location on your hard drive where the BIOS update is downloaded. You will need to access this path when you are ready to install the update. b. NOTE:

installing any software updates, especially system BIOS updates. If you connect your tablet to a network, consult the network administrator before BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download is complete. If no instructions are revealed, follow these steps:

1. Swipe from the right edge of the touch screen, tap Search, and then tap the search box. Type file, and then tap File Explorer. Select your hard drive designation. The hard drive designation is typically Local Disk (C:). 2. 3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the update. 4. Double-tap the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. 5. Complete the installation by following the on-screen instructions. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive. Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine if the computer hardware is functioning properly. The tool runs outside of the operating system to isolate hardware failures from issues that may be caused by the operating system or other software components. 42 Chapter 11 Computer Setup and HP PC Hardware Diagnostics (UEFI) To start HP PC Hardware Diagnostics UEFI:

1. 2. 3. 4. Shut down the tablet if it is not already powered off. To power on the tablet, press the Power button and Volume down button simultaneously. Select System Diagnostics. Select the type of diagnostic test that you want to run, and then follow the on-screen instructions. NOTE:

If you need to stop a diagnostic test while it is running, press anywhere on the screen. Using Computer Setup 43 12 Support Contacting support If the information provided in this user guide or HP Support Assistant does not address your questions, you can contact support. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. Here you can:

Chat online with an HP technician. NOTE: When support chat is not available in a particular language, it is available in English. Email support. Find support telephone numbers. Locate an HP service center. 44 Chapter 12 Support 13 Specifications Input power The power information in this section may be helpful if you plan to travel internationally with the tablet. The tablet operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100240 V, 5060 Hz. Although the tablet can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this tablet. The tablet can operate on DC power within the following specifications. Input Power Operating voltage and current Rating 9 V DC @ 1.1A 10W NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 V rms. NOTE: The tablet operating voltage and current can be found on the system regulatory label. Operating environment Factor Temperature Metric U.S. Operating (writing to optical disc) 5C to 35C Nonoperating

-20C to 60C Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) 10% to 90%

5% to 95%

41F to 95F

-4F to 140F 10% to 90%

5% to 95%

Operating Nonoperating

-15 m to 3,048 m

-15 m to 12,192 m

-50 ft to 10,000 ft

-50 ft to 40,000 ft Input power 45 A Traveling with the tablet For best results, follow these traveling and shipping tips:

Prepare the tablet for traveling or shipping:

Back up your information. Remove all external media cards, such as memory cards. bags. CAUTION: To reduce the risk of damage to the tablet, damage to a drive, or loss of information, remove the media from a drive before shipping, storing, or traveling with a drive. Turn off and then disconnect all external devices. Shut down the tablet. Take along a backup of your information. Keep the backup separate from the tablet. When traveling by air, carry the tablet as hand luggage; do not check it in with the rest of your CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. In-flight tablet use is at the discretion of the airline. If you plan to use the tablet during a flight, check with the airline in advance. If you are shipping the tablet, use suitable protective packaging and label the package FRAGILE. If the tablet has a wireless device installed, such as an 802.11b/g device, a Global System for Mobile Communications (GSM) device, or a General Packet Radio Service (GPRS) device, the use of these devices may be restricted in some environments. Such restrictions may apply onboard aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that applies to the use of a particular device, ask for authorization to use it before you turn it on. If you are traveling internationally, follow these suggestions:

Check the computer-related customs regulations for each country or region on your itinerary. Check the power cord and adapter requirements for each location in which you plan to use the tablet. Voltage, frequency, and plug configurations vary. WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the tablet with a voltage converter kit sold for appliances. 46 Appendix A Traveling with the tablet B Electrostatic discharge Electrostatic discharge is the release of static electricity when two objects come into contactfor example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components. To prevent damage to the tablet, damage to a drive, or loss of information, observe these precautions:

If removal or installation instructions direct you to unplug the tablet, unplug it after being properly grounded and before removing a cover. Keep components in their electrostatic-safe containers until you are ready to install them. Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. Use nonmagnetic tools. Before handling components, discharge static electricity by touching an unpainted metal surface of the component. If you remove a component, place it in an electrostatic-safe container. If you need more information about static electricity or assistance with component removal or installation, contact HP support. 47 Index A administrator password 33 ambient light sensor, identifying 4 antivirus software 33 audio functions, checking 23 audio-in (microphone) jack, identifying 7 audio-out (headphone) jack, identifying 7 B battery conserving power 28 discharging 27 displaying remaining charge 27 low battery levels 27 Battery Check 27 battery information, finding 27 battery power 26 BIOS determining version 41 updating 41 Bluetooth device 10, 15 buttons power 7, 25 volume 23 C caring for your tablet 35 checking audio functions 23 cleaning your tablet 35 components bottom 8 front 4 rear 6 top 7 connecting to a WLAN 12 conservation, power 28 corporate WLAN connection 12 critical battery level 25 critical updates, software 34 D docking connector, identifying 8 48 Index drive media 25 E edge-swipe gestures 19, 20 electrostatic discharge 47 external AC power, using 28 F f11 recovery 38 firewall software 33 G GPS 13 H hard drive recovery 38 headphone (audio-out) jack 7 HP Client Security 34 HP Mobile Broadband, disabled 13 HP PC Hardware Diagnostics

(UEFI) 42 I input power 45 Internet connection setup 11 J jacks audio-in (microphone) 7 audio-out (headphone) 7 K keys volume 23 L labels serial number 8 left-edge swipe 20 low battery level 27 M memory card inserting 30 removing 30 supported formats 30 memory card reader, identifying 6 memory card/SIM slot, identifying 6 microphone (audio-in) jack, identifying 7 N NFC tapping area 4 O operating environment 45 P password protection on wakeup 26 passwords administrator 33 user 33 pinching touch screen gesture 18 power battery 26 conserving 28 options 25 power button 25 identifying 7 power-saving states 25 product name and number, tablet 8 public WLAN connection 12 R readable media 25 recovery 39 recovery partition 38 refresh 39 regulatory information 8 restoring the hard drive 38 right-edge swipe 19 S security, wireless 12 serial number 8 Windows Refresh 39 Windows button, identifying 5 wireless antennas, identifying 4 wireless certification information 8 wireless controls, operating system 10 wireless network (WLAN) connecting 12 corporate WLAN connection 12 equipment needed 11 functional range 12 public WLAN connection 12 security 12 using 10 antennas, identifying 4 device 10 writable media 25 WWAN antennas, identifying 4 device 13 Z zoom touch screen gesture 18 setting password protection on wakeup 26 power options 25 setup of WLAN 11 shutdown 25 SIM, inserting 13 Sleep exiting 25 initiating 25 slots, memory card/SIM, identifying 6 SoftPaqs, downloading 36 software antivirus 33 critical updates 34 firewall 33 T tablet, traveling 46 top-edge swipe 20 touch screen gestures 19, 20 2finger click 18 edge-swipe gestures 19, 20 one-finger slide 16 pinch 18 rotating 19 scrolling 17 tapping 17 touch screen, using 16 traveling with the tablet 46 turning off the tablet 25 speakers, identifying 8 switch, autorotate, identifying 7 WLAN U unresponsive system 25 user password 33 using external AC power 28 power-saving states 25 V volume adjusting 23 buttons 23 keys 23 W warranty period 8 webcam 4, 24 Index 49