OEM information NOTICE TO OEMS This is a template of the instructions that are provided with the module to OEMs that clearly state their obligations to include the following Statements including RF Exposure information in their manual provided to the end-user. This information below has to be included in the manuals for the devices this module is included. Regulatory information The Hewlett Packard <device name of the OEM product> wireless network device must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. <Company name> is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this <company name> <device name> kit, or the substitution or attachment of connecting cables and equipment other than specified by <company name>. The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.
<company name> and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from failing to comply with these guidelines. CanadaIndustry Canada (IC) This device complies with RSS210 of Industry Canada. USAFederal Communications Commission (FCC) This device complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference that may cause undesired operation. USA WARNINGExposure to radio frequency radiation The radiated output power of this <company name> <device name> wireless network device is far below the FCC radio frequency exposure limits. Nevertheless, the <company name>
<device name> wireless network device shall be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall be not less than 20 cm (8 inch) human contact during normal operation. Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which Increase the distance between the equipment and the receiver. the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTEThis <company name> <device name> wireless network device must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Lothar Schmidt Technical Manager CETECOM Inc.