June 8, 2021 For additional information or to submit technical questions, go to: https://createpoint.qti.qualcomm.com Confidential Qualcomm Technologies, Inc. and/or its affiliated companies May Contain Trade Secrets NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or websites to:
DocCtrlAgent@qualcomm.com. Confidential Distribution: Use or distribution of this item, in whole or in part, is prohibited except as expressly permitted by written agreement(s) and/or terms with Qualcomm Incorporated and/or its subsidiaries. Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of Qualcomm Technologies, Inc. All Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark or registered trademark of Qualcomm Incorporated. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-
international law is strictly prohibited. ws. Diversion contrary to U.S. and Inc. U.S.A. Revision history Revision Date Description AA AB April 2021 June 2021 Initial release Update 6GHz information 2 Contents 1 Introduction........................................................................................................................... 5 2 Applicable Module ................................................................................................................ 6 3 Available Global Modular Approvals from Qualcomm ....................................................... 7 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator ................................................................................................................ 8 5 Compliant/Allowable Tx Power File ..................................................................................... 9 6 Allowable Antennas to Use with the Radio Module ...........................................................10 7 Antenna Placement Inside the Host System and RF Exposure ........................................12 8 Simultaneous Transmission with Other Integrated or Plug-In Radios.............................13 9 Module May Not Be Installed by End Users .......................................................................14 10 Required Labeling on the Outside of the Host.................................................................15 10.1 FCC .......................................................................................................................................................15 10.2 Taiwan NCC ..........................................................................................................................................16 10.3 European Community Radio Equipment Directive (RED) ......................................................................16 11 Required Labeling on the Module .....................................................................................17 11.1 FCC labeling on the Module ..................................................................................................................17 11.2 Rest of world labeling on the Module .....................................................................................................17 11.3 Instructions to download the sample global label artwork with certification IDs .....................................18 12 Required Regulatory Wording for User Manual/Installation Manual ..............................19 12.1 FCC compliance information..................................................................................................................19 12.2 Industry Canada Notices........................................................................................................................20 12.3 European Community (RED) user manual wording and declaration......................................................21 12.4 European Community (RED) Declaration of Conformity for System ......................................................22 12.5 Taiwan user manual wording .................................................................................................................22 12.6 Korea user manual wording ...................................................................................................................23 12.7 Brazil user manual wording....................................................................................................................23 12.8 Japan user manual wording...................................................................................................................23 13 OEM Integrator Checklist ..................................................................................................24 Tables 3 QCNFA725 OEM Integrator Instructions Contents Table 6-1 Allowed maximum gain (dBi), including antenna cable loss.........................................................................10 4 1 Introduction This document provides instructions and steps that the OEM Integrator must follow when designing and manufacturing a system using a Qualcomm design radio module, the CAUTION:
The OEM integrator is responsible for all system-level EMI/EMC and product safety testing and certification that apply to the host system in the U.S. and other countries where the system will be marketed or sold. The Qualcomm modular certifications described in this document only apply to radio conformance for the Module. 5 2 Applicable Module Regulatory model: QCNFA725 FCC ID:
6 3 Available Global Modular Approvals from Qualcomm Module certification is limited to those countries in which Qualcomm has obtained radio modular approvals. For integrators to access the current list of certified countries:
1. Log on to the Qualcomm CreatePoint system. 2. Search for the regulatory document under chip model WCN6855. NOTE: If integrators do not have access to the Qualcomm CreatePoint system, contact a Qualcomm account representative to request access to the country list and modular certificates. OEM integrators must receive their own radio certification for each country where the system will be sold if a modular certification for that country is not available from Qualcomm. 7 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator Global modular certifications only apply to radio conformance for the Module. The OEM integrator is responsible for any additional system-level EMI/EMC and product safety testing and certifications that apply in the U.S. and other countries where the host system is containing the Module. This includes, but is not limited to, Federal Communications Commission (FCC) Part 15 Class B Digital Emissions, China CCC, Taiwan BSMI, Korea KC, ETSI EN 301 489-17, and others. These system-level EMC tests are done with the Module installed and included in the scope of the submission. Modular radio certification is not possible in some countries. For these countries, OEM integrators must ensure radio certification for the end system is obtained before placing the product on the market. The current list of applicable countries is provided by Qualcomm. For questions, additional regulatory conformance testing information, and/or related submissions, contact a Qualcomm account representative. 8 5 Compliant/Allowable Tx Power File This file contains the transmit power settings that are programmed in the board-data file in the software. The software image is installed at the time of manufacture of the module. The board data information is provided by Qualcomm. Contact your Qualcomm account representative for details on the board data file (BDF). CAUTION:
9 6 Allowable Antennas to Use with the Radio Module The module is certified for use only with certain antennas described in this chapter. NOTE: Allowed antenna type: PIFA and MONOPOLE type with omnidirectional pattern antenna. NOTE: End host product must use integrated antenna that antenna is integrated in host mechanical housing. Table 6-1 Allowed maximum gain (dBi), including antenna cable loss Frequency PIFA type (dBi) MONOPOLE type (dBi) Max. gain (dBi) for Japan and Korea antenna filing/listing 2.4 GHz 5.150-5.250 GHz 5.250-5.350 GHz 5.470-5.725 GHz 5.725-5.850 GHz 5.850-5.895 GHz 5.925-6.425 GHz 6.425-6.525 GHz 6.525-6.875 GHz 6.875-7.125 GHz 3.53 (H or V) 3.06 (H or V) 3.07 (H or V) 4.81 (H or V) 4.2 (H or V) 5.09 (H or V) 5.14 (H or V) 5.09 (H or V) 5.16 (H or V) 5.12 (H or V) 3.22 (H or V) 3.35 (H or V) 3.42 (H or V) 4.77 (H or V) 4.72 (H or V) 4.71 (H or V) 4.75 (H or V) 4.29 (H or V) 4.81 (H or V) 4.74 (H or V) 3.53 (H or V) 3.35 (H or V) 3.42 (H or V) 4.81 (H or V) 4.72 (H or V) 5.09 (H or V) 5.14 (H or V) 5.09 (H or V) 5.16 (H or V) 5.12 (H or V) CAUTION:
Use of other similar type antennas may only require a C1PC to confirm SAR performance is the same or better, i.e., lower, but only an equivalent type antenna can be used without any additional testing/submission. Contact your Qualcomm account representative for additional guidance if you choose to use different antenna types or higher gain antennas in the end system. Some examples of antennas Not considered the same type as PIFA or Monopole:
10 QCNFA725 OEM Integrator Instructions Allowable Antennas to Use with the Radio Module Dipole PCB trace Patch Chip antennas In addition, regulatory agencies in Japan, Korea, and Taiwan require submission of antenna specification sheets for all antenna models used with the Qualcomm module. This notification process must be followed by the integrator before the original product launch and whenever new host systems, with new antenna models, are launched. The antenna type does not matter in Japan and Korea antenna filing/listing as long as host platform antenna gain does not exceed max. gain value as represented in Table 6-1. Notification of all antenna models to be used with the Module For training on the notification process and submitting antenna specifications, send an email to:
qca.ant@qti.Qualcomm.com 11 7 Antenna Placement Inside the Host System and RF Exposure The FCC and regulatory bodies of other countries impose strict conditions and limitations on the RF exposure levels of end products. Acceptable RF exposure levels for the Module depend on:
Transmit power. Location of the transmitting antenna(s) inside the host system. Expected separation of the transmitting antennas to the end user. OEM integrators must take great care to ensure each host system complies with the applicable RF exposure requirements. For mobile devices The antenna-to-user separation distance must be greater than 20 cm. CAUTION:
This separation is measured between the closest point of each transmitting antenna inside the host device to the point of contact by the user or nearby person outside of the host device. For notebooks/netbooks/laptops with antenna(s) in the display section, the LCD is opened 90 degrees/perpendicular to the keyboard. The separation distance is then measured from the nearest point of each transmitting antenna to the bottom of the host. NOTE: When one or more of these conditions cannot be met for a particular host system, additional testing is required to secure the necessary certifications for the system. Contact your Qualcomm account representative with any questions regarding compliance for host system(s) with these restrictions. NOTE: These restrictions do not apply to a receive-only antenna. 12 8 Simultaneous Transmission with Other Integrated or Plug-In Radios The FCC imposes conditions and limitations when additional radio(s) are co-located in the same host system as the Qualcomm Module with capability to transmit simultaneously. Co-locating other radios, such as an integrated or plug-in wireless WAN/cellular radio with the Qualcomm wireless LAN module requires additional evaluation and possible submission for authorization from the FCC. The rules are highly dependent on the characteristics of the particular radios that are co-
located and simultaneously transmitting. The OEM integrator should seek guidance from a knowledgeable test lab or consultant to determine if additional testing and FCC certification is required. In this case, failure to evaluate and follow the required FCC procedures will invalidate the FCC certification of the Module and end system. Detailed rules from the FCC are described in various Knowledge Database (KDB) publications and can be found using the following instructions. 1. To download the FCC rules for co-located radios:
a. https://apps.fcc.gov/oetcf/kdb/index.cfm b. c. Download latest applicable version of KDB 616217 document. 2. For expert advice regarding co-location rules, the recommendation is to contact an FCC-
approved Telecommunication Certification Body (TCB):
a. https://apps.fcc.gov/oetcf/kdb/index.cfm. b. Choose your country and or state from the pull-down list. c. Scroll through the search results and choose a TCB contact from which to seek advice. 3. Contact your Qualcomm account representative with any questions regarding compliance of the host system(s) with the above restrictions. 13 9 Module May Not Be Installed by End Users FCC rules require that the Module be installed in host systems at the factory by the OEM integrator. End users of the system may not install the Module. The host product user instructions must not advise the end user on how to access or remove the Module. Additional FCC authorization/filing is needed to allow end user installation of radio modules. If modules are provided to end users for installation in the host, a two-way authentication protocol is required to limit the Module to operate only with authorized host systems. For more details, refer to FCC KDB 996393 found at https://apps.fcc.gov/oetcf/kdb/index.cfm l. 80-27705-3 Rev. AB Confidential Qualcomm Technologies, Inc. and/or its affiliated companies May Contain Trade Secrets 14 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 10 Required Labeling on the Outside of the Host Explanatory text in red font must not be included in the final label. 10.1 FCC The FCC requires a label on the outside of the host system visible to the end user. Example wording is:
Contains:
FCC ID: XXX-XXXXXXX IC: XXXXX-XXXXXX s found in Section 2). The FCC requires a logo signifying emissions compliance on the outside of the host system. Additional options are available for placement of the FCC label on the host. Refer to the FCC Knowledge Database KDB 784748 found at https://apps.fcc.gov/oetcf/kdb/index.cfm. NOTE: The Integrator is responsible for performing FCC Part 15 Class B digital emissions testing on the end-system with the radio Module installed. The FCC logo that follows should not be affixed, unless the OEM integrator has obtained the necessary Part 15 approval, e.g., self-declaration of conformity. If the host system is approved to FCC Class B digital emissions limits under a grant of certification issued by a TCB, the FCC ID number shown on the grant should be used on the label instead of the FCC logo that follows. 15 QCNFA725 OEM Integrator Instructions Required Labeling on the Outside of the Host 10.2 Taiwan NCC Taiwan NCC requires a label on the outside of the host system visible to the end user. The required wording is:
XXXyyyLPDzzzz-x Section 2). 10.3 European Community Radio Equipment Directive (RED) The European Community RED (Radio Equipment Directive) requires the CE Marking shown as follows on the outside of the host AND on the outside of the shipping container/packaging:
The European Community RE Directive also requires the following note to consumers on the outside of the shipping container/packaging:
NOTE: The Integrator is expected to translate the text in this Section into the appropriate local languages for the European countries in which the product will be marketed or sold. AT BE BG CZ DK EE FR DE IS IE IT EL ES CY LV LI LT LU HU MT NL NO PL PT RO SI SK TR FI SE CH UK HR The full text of the RED is located at:
http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex:32014L0053 16 11 Required Labeling on the Module 11.1 FCC labeling on the Module The Integrator must ensure that the FCC ID (as indicated in Section 2) is affixed on the Module along with other country certification numbers and logos as described in this section. NOTE: The Module ODM may affix regulatory labeling at time of the Module manufacturing. However, the PCOEM must ensure the Module label is complete, correct, and applicable for all countries where the host system will be imported, marketed, or sold. 11.2 Rest of world labeling on the Module The Integrator must ensure the Module includes a global regulatory label with certification numbers and logos for all target countries. The system integrator is responsible for confirming the final regulatory label on the radio Module contains all required certification IDs for all countries in which the system will be marketed or sold. It is recommended that the PCOEM implement a review and sign-off process and change control process with each Module ODM to ensure the Module label meets the PCOEM requirements. Qualcomm provides sample artwork with the applicable certification numbers for this Module. The PDF document can be opened using Adobe Illustrator, so the sample artwork can be copied and modified as needed. Therefore, the final label produced by the Module manufacturer will vary from this sample. However, the logos and certification numbers must be those shown in the sample global label. Contact your Qualcomm account representative with any questions regarding module labeling. 80-27705-3 Rev. AB Confidential Qualcomm Technologies, Inc. and/or its affiliated companies May Contain Trade Secrets 17 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 12 Required Regulatory Wording for User Manual/Installation Manual The integrator must include text in the user manual meeting the regulators requirements. The text in the following sections or similar wording should be used. NOTE: Text in red font must be replaced. 12.1 FCC compliance information FCC compliance information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product does not contain any user serviceable components. Any unauthorized product changes or modifications will invalidate warranty and all applicable regulatory certifications and approvals, including authority to operate this device. FCC Part 15 Digital Emissions Compliance We [System Manufacturer Name, Address, Telephone], declare under our sole responsibility that the product [System Name] complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and radiates radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from the one the receiver is connected to. Consult the dealer or an experienced radio/TV technician for help. The user may find the following booklet prepared by the Federal Communications Commission helpful:
The Interference Handbook This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock No.004-000-
00345-4. 19 QCNFA725 OEM Integrator Instructions Required Regulatory Wording for User Manual/Installation Manual RF Exposure Statement Radiation Exposure Statement The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product available. FCC 6GHz statement Prohibited for control of or Communications with unmanned aircraft systems, including drones. 12.2 Industry Canada Notices This device complies with Canadian RSS-247. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif est conforme la norme CNR-247 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. NOTE: For 5GHz and/or when co-located with 5 GHz transmitters, the following statements should be provided in the user information Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
ation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont rservs uniquement pour une utilisation n de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
doit se conformer la limite de p.i.r.e.;
-5 350 MHz et 5 470-5 725 MHz sitifs utilisant la bande 5 725-5 825 MHz) doit se conformer la
(iv) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--
radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
-5 350 MHz et 5 650-5 850 MHz et que ces 20 QCNFA725 OEM Integrator Instructions Required Regulatory Wording for User Manual/Installation Manual RF Exposure Statement Radiation Exposure Statement The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product available. 12.3 European Community (RED) user manual wording and declaration NOTE: Text in red font must be replaced with name of company responsible for placing the system on the European Community Market. Europe EU Declaration of Conformity Marking by this symbol indicates compliance with the Essential Requirements of the RED of the European Union (2014/53/EU).This equipment meets the following conformance standards:
EN 300 328, EN 301 893, EN 301 489-17, EN 62368-1, EN 62311 Dansk [Danish]
Deutsch [German]
Eesti [Estonian]
English Espaol [Spanish]
[COMPANY NAME]
2014/53/EU. Undertegnede [COMPANY NAME] erklrer herved, at flgende udstyr Radiolan overholder de vsentlige krav og vrige relevante krav i direktiv 2014/53/EU. Hiermit erklrt [COMPANY NAME] dass sich das Gert Radiolan in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 2014/53/EU befindet. Kesolevaga kinnitab [COMPANY NAME] seadme Radiolan vastavust direktiivi 2014/53/EU phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. Hereby, [COMPANY NAME], declares that this Radiolan is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Por medio de la presente [COMPANY NAME] declara que el Radiolan cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 2014/53/EU.
[COMPANY NAME]
Radiolan 2014/53/EU. Franais [French]
Par la prsente [COMPANY NAME] dclare que l'appareil Radiolan est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/EU. slenska [Icelandic]
Italiano [Italian]
Hr me lsir [COMPANY NAME] yfir v a Radiolan er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 2014/53/EU. Con la presente [COMPANY NAME] dichiara che questo Radiolan conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 2014/53/EU. 21 QCNFA725 OEM Integrator Instructions Required Regulatory Wording for User Manual/Installation Manual Latviski [Latvian]
[COMPANY NAME]
ka Radiolan 2014/53/EU
[COMPANY NAME]
Radiolan atitinka esminius reikalavimus ir kitas 2014/53/EU Direktyvos nuostatas. Malti [Maltese]
Hawnhekk, [COMPANY NAME], jiddikjara li dan Radiolan jikkonforma mal-
-Dirrettiva 2014/53/EU. Magyar [Hungarian]
Alulrott, [COMPANY NAME] nyilatkozom, hogy a Radiolan megfelel a vonatkoz alapvet kvetelmnyeknek s az 2014/53/EU irnyelv egyb elrsainak. Nederlands [Dutch]
Hierbij verklaart [COMPANY NAME] dat het toestel Radiolan in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 2014/53/EU. Norsk [Norwegian]
[COMPANY NAME] erklrer herved at utstyret Radiolan er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 2014/53/EU. Polski [Polish]
Niniejszym [COMPANY NAME]
olan jest zgodny z zasadniczymi 2014/53/EU. Portugus [Portuguese]
[COMPANY NAME] declara que este Radiolan est conforme com os requisitos essenciais e outras disposies da Directiva 2014/53/EU. Slovensko [Slovenian]
[COMPANY NAME] izjavlja, da je ta Radiolan v skladu z bistvenimi zahtevami in Slovensky [Slovak]
[COMPANY NAME]
2014/53/EU. Radiolan 2014/53/EU. zklad Suomi [Finnish]
Svenska [Swedish]
[COMPANY NAME] vakuuttaa tten ett Radiolan tyyppinen laite on direktiivin 2014/53/EU oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar [COMPANY NAME] att denna Radiolan str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 2014/53/EU. 12.4 European Community (RED) Declaration of Conformity for System In addition to including the radio conformity wording described in Section 12.3, the end integrator must also create and sign a European Declaration of Conformity (DoC) for all European Directives applicable to the end product. At a minimum, this will be a DoC per the RED Directive covering the essential requirements. The DoC must reference harmonized standards used for all radios present in the system. NOTE: An image of the DoC signed by the OEM integrator may be included in the user manual or a link 12.5 Taiwan user manual wording
22 QCNFA725 OEM Integrator Instructions Required Regulatory Wording for User Manual/Installation Manual 12.6 Korea user manual wording Korea KCC 12.7 Brazil user manual wording Hosts using approved modules would be required to put label information on the product or statement in the user manual:
Este produto contm a placa xxxx cdigo de homologao Anatel NNNN-NN-NNNN Translation:
This product contains the module xxxx Anatel approval code NNNNN-NN-NNNNN User manual statement:
Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Host products that are not subject to Anatel approval, but include this approved module must include in their manual, quick guide, or by other authorized means in Act 4088, the following information:
"Incorpora produto homologado pela Anatel sob nmero HHHHH-AA-FFFFF". Translation:
"Incorporates product approved by Anatel under number HHHHH-AA-FFFFF". 12.8 Japan user manual wording It is required to have 5GHz W52, W53 band indoor use warning provide in user manual:
5GHz band (W52,W53): Indoor use only (except communicate to high power radio) 5GHz
(W52, W53)
) 23 13 OEM Integrator Checklist The party below will implement the Qualcomm Module in host systems in accordance with the instructions specified in this document and the documents referenced herein. The OEM integrator will ensure the Module is integrated in a host systems using only the approved antenna model(s) described in this document. The OEM integrator will ensure the antenna placement inside the host system will maintain the required spacing to end user for RF Exposure compliance, as specified in this document. If other radios are integrated inside the host with the Qualcomm Module, the OEM integrator will contact its test lab, TCB or Qualcomm to determine if additional FCC compliance evaluation is required to meet FCC collocation rules. The OEM integrator will ensure end user documentation will contain the specified regulatory wording and ensure the host system and the Module itself are labeled as specified in this document. The OEM integrator will ensure the Module is programmed in the factory with compliant transmit power not exceeding the levels specified in this document. Qualcomm Incorporated requests that the OEM integrator acknowledge its receipt of this document and the above instructions. You may contact Qualcomm with any questions concerning this document or the responsibilities of the OEM integrator. Company Name ___________________________ Signature ___________________________ Company Address ___________________________ Name ___________________________ ___________________________ Title ___________________________ Email ___________________________ Phone ___________________________ Date ___________________________ 24