Contents: Company 54g Wireless LAN (WLAN) User Manual 54g Wireless LAN (WLAN) User Manual Introduction Completing the Setup Utility Functions Specifications Regulatory Information Glossary Company Copyright Statement Company Trademark Statement. Microsoft and Windows are trademarks owned by Microsoft Corporation. All other trademarks are the property of their respective owners. file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/index.htm [1/30/03 10:11:15 PM]
Introduction: Company 54g Wireless LAN (WLAN) User Manual Back to Contents Introduction: 54g Wireless LAN (WLAN) User Manual The 54g WLAN Solution Using the 54g WLAN Features and Requirements The 54g WLAN Solution The 54g WLAN solution accesses wireless local area networks (LANs), enables the sharing of a local printer and files with others in the network, accesses the Internet, and enables roaming about the officewire-free. This wireless LAN solution is designed for both the home user and small businessesand it is scalable so that users can be added and new network features can be enabled as networking needs grow. WEP is a security protocol for wireless local area networks (defined in IEEE Std 802.11, 1999 Edition) that encrypts data sent over radio waves. The use of the WEP key is optional and can be enabled or disabled. If the network being connecting to has enabled WEP, WEP must also be enabled in the network profile and the WEP key must be set to match the WEP key used by the network. Otherwise, it is impossible to connect to the network. Enterprise Users file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/intro.htm (1 of 3) [1/30/03 10:11:16 PM]
Introduction: Company 54g Wireless LAN (WLAN) User Manual Obtain the following information from the network administrator:
l Network names (SSID) of the specific wireless networks to connect to l WEP (Wired Equivalent Privacy) key information (if any) for the networks to connect to l For Microsoft Windows networking, the customer name and workgroup name l For a network account, a user name and password l An IP address (if not using a DHCP server) Using the Company 54g WLAN The 54g enabled device is an IEEE 802.11g based wireless LAN device. A LAN is composed of two or more computers that are connected to each other to share files or common equipment such as a printer or an Internet connection. A wireless LAN provides the same functionality of a wired network, but it eliminates the need to install networking cables and other networking equipment. Not only is a wireless LAN easier to deploy, but it also allows for roaming. Features and Requirements An IEEE 802.11 based wireless LAN includes the following features:
l Support for IEEE 802.11g draft specification l Support for IEEE 802.11b standard l 2.4-GHz band operation l Network data rate of up to 54 Mbit/s l Wired Equivalent Privacy (WEP) encryption The Company 54g enabled device works with any Wi-Fi CERTIFIED base station or wireless client adapter. file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/intro.htm (2 of 3) [1/30/03 10:11:16 PM]
Introduction: Company 54g Wireless LAN (WLAN) User Manual Back to top Back to Contents Ccopyright and Trademark Information. file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/intro.htm (3 of 3) [1/30/03 10:11:16 PM]
Completing the Setup: Company 54g Wireless LAN (WLAN) User Manual Back to Contents Completing the Setup: Company 54g Wireless LAN (WLAN) User Manual NOTEBefore starting, obtain the required network information from the network administrator or the wireless access point installer (see The Company 54g WLAN Solution in Introduction). Modes of Operation Modes of Operation A wireless LAN can be configured for two different modes of operation: infrastructure network and computer-to-computer
(ad hoc) network. Whereas each mode has its advantages, one mode may be more appropriate than the other, depending on the location and type of network connection. Infrastructure Mode The key difference between the infrastructure type of network and an ad hoc network is that the infrastructure network includes a base station (host) computer that has a built-in wireless network adapter and is connected to a wireless access point (AP). This functionality allows computers on the infrastructure wireless LAN to access the resources and tools of the wired LAN, including Internet access, e-mail, file transfers, and printer sharing. Characteristics Networked computers communicate with each other through a dedicated AP. All data transmitted between the computers on this wireless LAN passes through the AP. Advantages l Extended range. The access point extends the range of the wireless LAN. Each computer can communicate with other computers equipped by wireless networks that are within the range of the access point. l Roaming. As the user moves around the home or office, the Company 54g enabled device determines the best access point to use to ensure continuous communication with the network. l Network connectivity. An access point can provide wireless LAN access to an existing wired network by bridging the two networks together. This gives users of the wireless LAN access to all the functions of a wired networkfrom file server access to e-mail and the Internet. Disadvantages Because the infrastructure mode offers more features, it requires additional components and setup time to deploy. file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/setup.htm (1 of 2 ) [1/30/03 10:11:18 PM]
Completing the Setup: Company 54g Wireless LAN (WLAN) User Manual Requirements A base station computer having a wired connection to the Internet, a wireless network adapter, and a connection to an AP. Computer-to-Computer Mode A peer-to-peer (ad hoc) network is the easiest to deploy and is ideal for home use or in small offices. This mode allows the sharing of files with other employees, printing to a shared office printer, and access to the Internet through a shared modem. With ad hoc networking, however, the computer is only able to communicate with other wireless networks that are within a certain range and are in the same wireless workgroup. Characteristics Networked computers send data directly to each other. Advantages l Simple setup l Cost efficiency Disadvantages Communication is limited to those who are located within a certain range. file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/setup.htm (2 of 2 ) [1/30/03 10:11:18 PM]
Utility Functions: Company 54g Wireless LAN (WLAN) User Manual Back to Contents Utility Functions: Company 54g Wireless LAN (WLAN) User Manual Running Utility Functions Running Utility Functions The utility functions and details for the wireless network connection are available in Control Panel. These functions include Disabling the network device, Renaming the connection, View status of this connection, and Change settings of this connection. Changing Settings 1. Click Start, then click Control Panel. 2. Double-click Network Connections. 3. Click Wireless Network Connections, and then click Change settings of this connection. l Click the Wireless Network tab to configure available networks, add and remove networks, and change network properties. l Click the General tab, then click Configure m To change the properties of the network adapter, click the Advanced tab. m To view details about the driver files, update the driver for the device, roll back to the previous driver, or to uninstall the driver, click the Driver tab. m To view resource settings, click the Resources tab. m To change power management settings, click the Power Management tab. The Advanced tab in Network Adapter Properties lists the properties for the Company 54g Wireless LAN (WLAN) adapter. file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/utility.htm (1 of 3) [1/30/03 10:11:19 PM]
Utility Functions: Company 54g Wireless LAN (WLAN) User Manual l IBSS Channel Number selects the independent basic service set (IBSS) channel number on which to operate. The Company 54g enabled device comes preset for use on channels 111. This setting is acceptable in most countries. Some countries allow use on more channels. If you travel to a country that allows the use of other channels, change the IBSS Channel Number to that number. l Locale selects the adapter properties that comply with the operating regulations for that locale. The Locale settings include USA, Israel, Japan, Jordan, Thailand, and Worldwide. This wireless LAN device is normally preset by default for the country in which the device is sold. Before operating this WLAN device, verify that the locale selection is correct by following the steps described in Changing Settings above. On the Advanced tab of HP WLAN 54g W450 Network Adapter Properties, m Click Locale m In the Value list, select the appropriate regional location l Radio Enable/Disable allows you to turn the radio on or off as necessary to comply with restrictions prohibiting the emission of radio signals. file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/utility.htm (2 of 3) [1/30/03 10:11:19 PM]
Utility Functions: Company 54g Wireless LAN (WLAN) User Manual l Rate sets the transmission rate. The default setting is Use best rate. This automatically adjusts the data rate to the optimal rate based on the capabilities of the other clients and access points. The default values for the properties listed below are set for maximum performance. Therefore, It is not recommended for home users to change the settings for any of these properties. Only network administrators or persons having technical wireless LAN experience should attempt to change any of the settings. frames. available:
adapter. l Fragmentation Threshold is the threshold at which the IEEE 802.11 adapter break the packet into multiple l IBSS 54g (TM) Mode is used to set the connection type in an ad hoc network. The following options are m 54g - 802.11b compatible links at the best rate with an IEEE 802.11b and an IEEE 802.11g network m 54g - Performance links only with IEEE 802.11g networks at the highest rate. In addition it excludes m 802.11b Mode links only with IEEE 802.11b networks at the highest rate. In addition it excludes IEEE
(recommended setting). IEEE 802.11b networks. 802.11g networks. l Locally Administered MAC Address is used to override the MAC address of the Company 54g Wireless LAN l PLCP Header is used to set the header type used for CCK rates. Can be long, auto (short/long). l Power Output is used for putting out a percentage of the maximum output power. l Power Save Mode is used to put the Company 54g enabled device into the IEEE 802.11 Power Save mode. In Power Save mode, the radio is periodically powered down to conserve power. When in Power Save mode, packets are stored in the AP until the STA comes on. file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/utility.htm (3 of 3) [1/30/03 10:11:19 PM]
Specifications: Company 54g Wireless LAN (WLAN) User Manual Back to Contents Specifications: Company 54g Wireless LAN (WLAN) User Manual Physical Characteristics Temperature and Humidity Limitations Power Characteristics Networking Characteristics Radio Characteristics Physical Characteristics Characteristic Form Factor Description USB form factor Dimensions (length, width) 65 mm 44 mm Temperature and Humidity Limitations Condition Description Operating Temperature 0 to 85C Operating Humidity 90% maximum (no condensation allowed) Storage Temperature 40 to 90C Storage Humidity 90% maximum (no condensation allowed) Power Characteristics Characteristic IEEE 802.11g Operation IEEE 802.11b Operation Values Doze Mode 40 mA Receive Mode 400 mA Transmit Mode 600 mA Power Supply 3.3 V 40 mA 220 mA 330 mA 3.3 V file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/specs.htm (1 of 2) [1/30/03 10:11:20 PM]
Specifications: Company 54g Wireless LAN (WLAN) User Manual Networking Characteristics Characteristic Compatibility Description IEEE Std 802.11b and IEEE Draft Std 802.11g for wireless LAN Network Operating System Microsoft Windows Networking Host Operating System Microsoft Windows XP Medium Access Protocol CSMA/CA (collision avoidance) with acknowledgment (ACK) Data rate (Mbps) IEEE Draft Std 802.11g: 1, 2, 5.5, 6, 11, 12, 18, 24, 36, 48, 54 IEEE Std 802.11b: 1, 2, 5.5, 11 NOTEThe Company 54g WLAN solution uses an automatic transmit rate select mechanism Radio Characteristics Characteristic Frequency Band Description 2.4 GHz (IEEE 802.11b, IEEE Draft Std 802.11g) Modulation Technique Direct sequence spread spectrum (DSSS) l CCK for high and medium transmit rate l DQPSK for standard transmit rate l DBPSK for low transmit rate Orthogonal frequency division multiplexing (OFDM) l 52 subcarriers with BPSK, QPSK, 16-QAM or 64-QAM l Forward error correction convolutional coding rate: 1/2, 2/3, 3/4 Spreading 11-chip Barker sequence Bit Error Rate (BER) Better than 10(5) ppm Nominal Output Power IEEE Std 802.11b: 14 dBm; IEEE Draft Std 802.11g: 15 dBm NOTESee Regulatory Information for country-specific performance characteristics and use restrictions. Back to top Back to Contents file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/specs.htm (2 of 2) [1/30/03 10:11:20 PM]
Copyright and Trademark Information Regulatory Statements for BCM94320P USA-Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Caution: Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Canada Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L utilisation de ce dispositif est autorise seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l utilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence. Caution: Exposure to Radio Frequency Radiation. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas website www.hc-sc.gc.ca/rpb. EuropeEU Declaration of Conformity and Restrictions Hereby, Broadcom Corp, declares that this equipment complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. This equipment is marked with the community. 0682 symbol and can be used throughout the European This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of following technical specifications:
EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission Systems;
Data transmission equipment operating in the 2,4GHz ISM band and using spread spectrum modulation techniques;
Harmonized EN covering essential requirements under article 3.2 of the R&TTE directive. EN 301 489-17 - Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17 Specific Conditions for Wideband Data and HIPERLAN Equipment. EN 60950 - Safety of Information Technology Equipment. EN 50385 Product standard to demonstrate the compliances of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields. Marking by the symbol indicates that usage restrictions apply. France - 2.4GHz for Metropolitan France :
In all Metropolitan dpartements, wireless LAN frequencies can be used under the following conditions, either for public or private use:
Indoor use: maximum power (EIRP*) of 100 mW for the entire 2400-2483.5 MHz frequency band Outdoor use: maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and with maximum power
(EIRP*) of 10 mW for the 2454-2483 MHz band Taiwan DGT warning statement Translation:
Article 14 Without permission granted, the frequency change, transmitting power enhance or alter of original design characteristic as well as function by company, enterprise, or user for approved Low-power radio frequency devices is not allowed. Article 17 Low-power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, shall cease operating immediately until no interference is achieved. Above mentioned Legal Communications is defined as radio communications operation follows Telecommunications Act. Low-power radio-frequency devices must susceptible with the interference from legal communications, ISM radio wave radiated devices. Glossary: Company 54g Wireless LAN (WLAN) User Manual Back to Contents Glossary: Company 54g Wireless LAN (WLAN) User Manual access point A stand-alone wireless hub that allows any computer that has a wireless network adapter to communicate with another computer and to connect to the Internet. ad hoc (also known as computer-
to-computer network) A communication configuration in which every computer has the same capabilities and any computer can initiate a communication session. available network BER client computer dBm DBPSK DQPSK DSSS One of the networks listed under Wireless Network Connection Properties. Any wireless network that is broadcasting and is within receiving range of the Company 54g enabled device appears on the list. Bit error rate. The ratio of errors to the total number of bits being sent in a data transmission from one location to another. The computer that gets its Internet connection by sharing either the host computer's connection or the access point's connection. A unit of expression of power level in decibels with reference to a power of 1 milliwatt. differential-binary-phase-shift keying. differential-quadrature-phase-shift keying. A compression technique that transmits only the differences between the values of the phase of the sine wave rather than the full absolute value. direct sequence spread spectrum. A type of radio technology used in wireless local area networks. DSSS operates by spreading a signal over a wide range of the 2.4-GHz band. Dynamic Host Configuration Protocol (DHCP) A mechanism for allocating IP addresses dynamically so that addresses can be reused when hosts no longer need them. file and printer sharing A capability that allows a number of people to view, modify, and print the same file(s) from different computers. GHz host computer IEEE gigahertz. A unit of frequency equal to 1 000 000 000 cycles per second. The computer that is directly connected to the Internet via a modem or network adapter. Institute of Electrical and Electronics Engineering Internet Protocol (IP) address The address of a computer that is attached to a network. Part of the address designates which network the computer is on, and the other part represents the host identification. LAN m MHz Mbps ns local area network meter megahertz. A unit of frequency equal to 1 000 000 cycles per second. megabits per second. Transmission speed of 1 000 000 bits per second. nanosecond. 1 billionth (1/1 000 000 000) of a second. file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/glossary.htm (1 of 2) [1/30/03 10:11:22 PM]
Glossary: Company 54g Wireless LAN (WLAN) User Manual OFDM preferred network Service Set Identifier (SSID) Wired Equivalent Privacy (WEP) orthogonal frequency division multiplexing. A method of digital modulation in which a signal is split into several narrowband channels at different frequencies. OFDM is used in European digital audio broadcast services. One of the networks that has been configured. Such networks appear under Preferred networks on the Wireless Networks tab of Wireless Network Connection Properties. A value that controls access to a wireless network. The SSID for your wireless network card must match the SSID (network name) for any access point that you want to connect with. If the value does not match, you are not granted access to the network. You can have up to three SSIDs. Each SSID can be up to 32 characters long and is case-sensitive. A form of data encryption for WLAN security. The WEP key information in the client computer must match the WEP key used by the access point or host computer. The WEP key can be enabled or disabled. The WEP key is case-
sensitive. Back to top Back to Contents Copyright and Trademark Information file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/glossary.htm (2 of 2) [1/30/03 10:11:22 PM]