Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611 WIFI+BT Module IEEE 802.11 a/b/g/n/ac 2T/2R Model Number: WCT5JM2611 Product Descrition The WCT5JM2611 is a complete dual-band(2.4GHz and 5GHz)WIFI 22 module. This module provides a high level of integration with a dual-stream IEEE 802.11ac MAC/ base band /radio and Bluetooth 5.0.The WLAN operation supports 20MHz,40MHz and 80MHz channels for data rates up to 866.7Mbps. It fully complies with IEEE 802.11 a/b/g/n/ac feature rich wireless connectivity at high standards,delivers reliable,cost-effective, throughput from an extended distance. Product Features Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n/ac 5GHz Wireless LAN. Bluetooth v5.0 Two transmit and Two receive path(2T2R) Works with all existing network nfrastructure. Capable of up to 128-Bit WEP Encryption. Freedom to roam while staying connected. UP to 866.7 Mbps High-Speed Transfer Rate in 802.11ac mode of operation. Operating SystemsLinux,Win7, Win8, Win10,XP Low power consumption. Easy to install and configure. High speed USB 2.0 interface ROHS compliant Product Specification Model WIF+BT Module Product Name WCT5JM2611 Standard Interface 802.11 a /b/g/n/ac USB Data Transfer Rate 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 866.7Mbps Modulation Method Frequency Band GFSK,/4-DQPSK,8DPSK(bluetooth) DQPSK,DBPSK,CCK(802.11b) QPSK,BPSK,16QAM,64QAM with OFDM (802.11g) QPSK,BPSK,16QAM,64QAM with OFDM (802.11n) QPSK,BPSK,16QAM,64QAM with OFDM (802.11a) QPSK,BPSK,16QAM,64QAM,256QAM with OFDM (802.11ac) BLUETOOTH 2402~2480 MHz WIFI 2.4G: 2412~2462 MHz 5G: 5280 MHz to 5320 MHz (U-NII-2A) 5500 MHz to 5825 MHz (U-NII-2C) Infrastructure Operation Mode Security WEP, TKIP, AES, WPA, WPA2 Operating Voltage 5V10%
Current Consumption 1000mA Antenna Type PIFA Operating Temperature 0 ~ 70C ambient temperature Storage Temperature
-40 ~ 80C ambient temperature Humidity 5 to 95 % maximum (non-condensing) PAGE 1 OF 7 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611 NOTICE:
please keep this product and accessories attached to the places which children can't touch;
do not splash water or other liquid onto this product, otherwise it may cause damage;
do not put this product near the heat source or direct sunlight, otherwise it may cause deformation or malfunction;
please keep this product away from flammable or naked flame;
please do not repair this product by yourself. Only qualified personnel can be repaired. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC ID:2AC23-WCT5J any similar wording that expresses the same meaning may be used. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator &
your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any company of the host device which install this modular with limit modular approval should perform the test of radiated & conducted emission and spurious emission,etc. according to FCC part 15C : 15.247 and 15.209 & 15.207 ,15B Class B and 15.407 Subpart E requirement, Only if the test result comply with FCC part 15C : 15.247 and 15.209 & 15.207 ,15B Class B and 15.407 Subpart E requirementthen the host can be sold legally. CFR 47 FCC PART 15 SUBPART C&E has been investigated. It is applicable to the modular transmitter PAGE 2 OF 7 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611 This radio transmitter 2AC23-WCT5J has been approved by Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. unique antenna connector (IPEX) must be used on the Part 15 authorized transmitters used in the host product. The concrete contents to check are the following three points.
) Must use following one of the three antenna.
) Should be installed so that the end user cannot modify the antenna;
) Feed line should be designed in 50ohm Fine tuning of return loss etc. can be performed using a matching network. Antenna information Manufacture: Hui Zhou Gaoshengda Technology Co.,LTD BT antenna Antenna model Frequency (MHz) WCT5H-20 WCT5H-40 WCT5H-60 WCT5J-20 WCT5J-40 WCT5J-60 2402-2480 2402-2480 2402-2480 2402-2480 2402-2480 2402-2480 2.4 G wifi antenna Antenna model Frequency (MHz) WCT5H-20 WCT5H-40 WCT5H-60 WCT5J-20 WCT5J-40 WCT5J-60 2402-2480 2402-2480 2402-2480 2402-2480 2402-2480 2402-2480 5G wifi antenna Antenna model Frequency (MHz) WCT5H-20 WCT5H-40 WCT5H-60 WCT5J-20 WCT5J-40 5150-5850 5150-5850 5150-5850 5150-5850 5150-5850 Antenna Type PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna Antenna Type PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna Antenna Type PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna Antenna Gain (dBi) 2.77 2.60 2.71 2.88 2.73 2.79 Antenna Gain (dBi) 2.77 2.60 2.71 2.88 2.73 2.79 Antenna Gain (dBi) 3.79 3.83 3.64 3.89 3.86 PAGE 3 OF 7 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611 WCT5J-60 5150-5850 PIFA Antenna 3.78 Note: The EUT has 2 kinds of antennas WCT5H and WCT5J.For WCT5H-20/ WCT5H-40/ WCT5H-60, they differ only in line length. For WCT5J-20/ WCT5J-40/ WCT5J-60, they differ only in line length. Canada Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Please notice that if the ISED certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains IC:12290A-WCT5J any similar wording that expresses the same meaning may be used. l'appareil hte doit porter une tiquette donnant le numro de certification du module d'Industrie Canada, prcd des mots Contient un module d'mission , du mot IC:12290A-WCT5J ou d'une formulation similaire exprimant le mme sens, comme suit The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate;
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et5 470-5 725 MHz doit se conformer la limite de p.i.r.e.;
pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie, selon le cas;
PAGE 4 OF 7 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611 The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 etla conformit l'exposition de RSS-102 RF, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne oumetteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. This radio transmitter 12290A-WCT5J has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le prsent metteur radio 12290A-WCT5J a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'metteur. unique antenna connector (IPEX) must be used on the Part 15 authorized transmitters used in the host product. The concrete contents to check are the following three points.
) Must use following one of the three antenna.
) Should be installed so that the end user cannot modify the antenna;
) Feed line should be designed in 50ohm Fine tuning of return loss etc. can be performed using a matching network. Antenna information Manufacture: Hui Zhou Gaoshengda Technology Co.,LTD BT antenna Antenna model Frequency (MHz) WCT5H-20 WCT5H-40 WCT5H-60 WCT5J-20 WCT5J-40 2402-2480 2402-2480 2402-2480 2402-2480 2402-2480 Antenna Type PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna Antenna Gain (dBi) 2.77 2.60 2.71 2.88 2.73 PAGE 5 OF 7 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611 WCT5J-60 2402-2480 PIFA Antenna 2.79 2.4 G wifi antenna Antenna model Frequency (MHz) WCT5H-20 WCT5H-40 WCT5H-60 WCT5J-20 WCT5J-40 WCT5J-60 2402-2480 2402-2480 2402-2480 2402-2480 2402-2480 2402-2480 5G wifi antenna Antenna model Frequency (MHz) WCT5H-20 WCT5H-40 WCT5H-60 WCT5J-20 WCT5J-40 WCT5J-60 5150-5850 5150-5850 5150-5850 5150-5850 5150-5850 5150-5850 Antenna Type PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna Antenna Type PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna PIFA Antenna Antenna Gain (dBi) 2.77 2.60 2.71 2.88 2.73 2.79 Antenna Gain (dBi) 3.79 3.83 3.64 3.89 3.86 3.78 Note: The EUT has 2 kinds of antennas WCT5H and WCT5J.For WCT5H-20/ WCT5H-40/ WCT5H-60, they differ only in line length. For WCT5J-20/ WCT5J-40/ WCT5J-60, they differ only in line length. Notice to OEM integrator Must use the device only in host devices that meet the FCC/ISED RF exposure category of mobile, which means the device is installed and used at distances of at least 20cm from persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The end user manual shall include FCC Part 15 /ISED RSS GEN compliance statements related to the transmitter as show in this manual(FCC/ICanada statement). Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15 B, ICES 003. Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the transmitter when the module is installed in the host. The use condition limitations extend to professional users, then instructions must state that this information also extends to the host manufacturers instruction manual.This module is stand-alone modular. If the end product will involve the Multiple simultaneously transmitting condition or different operational conditions for a stand-alone modular transmitter in a host, host manufacturer have to consult with module manufacturer for the installation method in end system. PAGE 6 OF 7 Version 1.0 Hui Zhou Gaoshengda Technology Co., LTD WCT5JM2611 Any company of the host device which install this modular should perform the test of radiated &
condicted emission and spurious emission etc. according to FCC Part 15C: 15.247 and 15.209 &
15.207, 15B class B requirement, only if the test result comply with FCC part 15C: 15.247 and 15.209 & 15.207, 15B class B requirement. Then the host can be sold legally. This modular transmitter is only FCC authorized for the specific rule parts ( 47CFR Part 15.247 and 15.407) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the transmitter when the module is installed in the host. Must have on the host device a label showing Contains FCC ID:2AC23-WCT5J and IC: 12290A-WCT5J Installer should put it in the manual The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems l'hte doit utiliser l'instrument uniquement dans des dispositifs qui rpondent la fcc / (catgorie d'exposition rf mobile, ce qui signifie le dispositif est install et utilis une distance d'au moins 20 cm de personnes. le manuel de l'utilisateur final doit inclure la partie 15 / (fac rss gen dclarations de conformit relatives l'metteur que de montrer dans ce manuel. le fabricant est responsable de la conformit de l'hte, le systme d'accueil avec le module install avec toutes les autres exigences applicables du systme comme la partie 15 b, ices - 003. accueillir le fabricant est fortement recommand de confirmer la conformit avec les exigences de la fcc /
(metteur lorsque le module est install dans l'hte. le dispositif d'accueil doivent avoir une tiquette indiquant contient FCC ID: 2AC23-WCT5JIC: 12290A-WCT5J Les personnes charges de l'installation devraient figurer dans le manuel:
Les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Doit avoir sur l'appareil hte une tiquette indiquant Contient l'ID FCC : 2AC23-WCT5J et IC : 12290A-WCT5J PAGE 7 OF 7 Version 1.0