Product Specificat ion Sheet Name of client Name of product Product Model
/ Version Product Specification s Specification Version Huizhou Intelligent Energy Co., Ltd. PORTABLE POWER STATION G300 V1.3.00 300W/288.6Wh A0 Date of issue 2022-9-5 Huizhou Intelligent Energy Co., Ltd. to copy To exam ine Approval Yang Chao Gu Jinbo Customer Signature:
conf irm To exam ine Appr oval Version number date Revision record Revised content explaination Draft Approva l catalog 1 INTRODUCTION4 1.1 About this product4 1.2 About this specification4 1.3 Normative reference4 2 Product Overview4 3 Schematic diagram of the whole machine5 4 Switches and buttons5 5 LCD screen display5 6 Product function and performance6 6.1 Battery pack characteristics6 6.2 DCInput (charge) characteristics6 6.3 ACOutput characteristics7 6.4 DC5525 + Flare Output Characteristics8 6.5 USB-AOutput characteristics8 6.6 USB-COutput characteristics8 6.7 Wireless charging and output characteristics9 6.8 Energy saving and environmental protection characteristics9 6.9Others10 7 Working environment10 8 Compliance with certification or testing standards10 9 Product physical parameters10 10 Packing list11 11 Notes11 1 Introduction 1.1 About this product Product model: G300 (US) standard) Product version number: V1.3.00 1.2 About this specification This product specification is compiled and released by the company's product center, which is the specification of the product released by the company, and is an important basis for the company to carry out the relevant work of this product (including production, inspection, testing, certification, marketing, etc.). This product specification is maintained and updated by the company's product center. 1.3 Normative reference Reference standards are as follows:
1 GB31241-2014 "Safety requirements for li-ion cells and pool sets for mobile electronic products"(StateHome Standard No.1No. The amended 2 GBT35590 - 2017 "General Standard for Mobile Power Supply for Digital Equipment"
3 CethTS018-2020Portable Lithium Ion Battery Energy Storage Power Source Certification Product Specification(for the first time) 2 Product Overview G300 is a standard in line with the United States AC power consumption, the rating of 300 W AC output, using the 18650 Ternary lithium battery, the battery capacity is288.6WhPortable energy storage power products, suitable for household emergency electricity, outdoor travel, emergency disaster relief, field work and other occasions. The product AC total output power is 300 W, with a 120 V AC output, three QC3.0 Standard USB-A Output, all the way in line with PD60 Standard USB-C Output, two ways DC5525 output With all the cigarette lighter mouth output, built-
in 5W LED Lighting and SOS Alarm function, support 10W Wireless charging function. This product comes standard with 15 V / 4A of AC Adapter Support 120VAC charging, but also supports DC photovoltaic18V/60-120W Charging and DC12V The car charger charges the product. 3 Schematic diagram of the whole machine 4 Switches and buttons Seri al numb er 1. 2. 3. 4. 5. Key name Numb er Master switch button 1 indiv idual AC Output Switch 1 indiv idual DC output switch nothi USB/Wireless charging switch Light switch ng nothi ng 1 indiv idual Intr oduc tion s Press the master switch, turn on, LCD screen lights up. Touch and press off. Press the master switch to control:DC5525 With the cigarette lighter output, the controlUSB-AUSB-
C, Wireless Charge Output Control the AC output. Normal: Short Press1 Next light, and then short press1 Secondary closure SOS: Continuous Short Press2 Next Flash, Short Press1 Next change light, and then short press1 Secondary closure 5 LCD screen display Informatio n item type Seri al numb er Intr oduc tion s 6. Battery power Displays the current battery charge as an energy column+Percentage presented. The main switch is turned on, and the battery power blen d is displayed. During charging, the energy column is displayed dynamically. When charging,POWER INThe icon lights up and shows the charging power. After the master switch is turned on,DC OUTIcon lights up and displays the total DC output of the Use power. After the master switch is turned on,USB OUTThe icon lights up and displays theUSB-A USB-CThe total power output of the three wireless charging. 7. Charging power 8. DC output power 9. USB/Wireless charging output power nume rica l valu e nume rica l valu e nume rica l valu e 10. AC output power After the AC output switch is turned on, AC OUTThe icon lights up and displays the communication Total used power output nume rica l valu e 11. 12. 13. Lighting lamp icon Light on, light bulb icon on fan icon Core detected45 Degree or power 60%After the rated load, the fan starts, Fan icon lights up The temperature of the battery cell is detected to Temperature alarm icon reach the set protection value, if the charging protection temperature value is reached, the exclamation mark icon flashes, if the discharge temperature protection value is reached, the exclamation mark icon Often bright. 6 Product function and performance 6.1 Battery pack characteristics project Minimu m standar d Maximu m Intr oduc tion s Cell type Voltage 11.2V capacity 16.95Ah Li-ion 14.6V 13AH 288.6Wh 16.8V Charging high temperature protection Charging high temperature protection Post-recovery Low temperature 45 50 55 40 45 50
-5 0 5 Factory capacity: 0.5C, 16.95Ah 0.2CCharge to16.8V0.02CCurrent cutoff,0.5CDischarge to11.2V, resulting capacity) Battery temperature exceeds this value, stop charging, charging protection diagram Exclamation point flashing; (via Master Control) After the high temperature protection stops charging, it returns to this temperature and automatically recovers. Recharging (via master control) Battery temperature below this value, stop charging, charging protection diagram protection for charging Low temperature protection for charging Post-recovery High temperature discharge protection High temperature discharge protection Post-recovery Discharge cryogenic protection Discharge cryogenic protection Post-recovery 0 5 10 60 65 70 55 60 65
-10
-15
-20
-15
-10
-5 Exclamation point flashing (via master control) After the low temperature protection stops charging, it returns to this temperature and automatically recovers. Recharging (via master control) Battery temperature exceeds this value, stop discharge Discharge protection icon Exclamation point is always bright
(via master control) High temperature protection after termination of discharge, return to the temperature, you can press Key recovery (via master control) Cell temperature below this value, stop discharge, discharge protection diagram Exclamation point is always bright
(through the main control) Low temperature protection after termination of discharge, return to the temperature, you can press Key recovery (via master control) 6.2 DCinput(ChargeCharacteristic project Minim um stand ard Maxim um Intr oduc tion s DC Charging mode PV Input port DC Input port DC Input voltage DC Input current DC Input power PV Input voltage PV Input current PV Input power Car charging input voltage Car charger input current Car charger input power Multiple charging at the same time Charge and put SupportAC Adapters, car chargers,PV 1 indivi dual 1 indivi dual 12V 15V 26V 3.4A 5A 52W 55W 18V 18V 26V 3A 5A 52W 55W 12V 15V 4A 5A 48W 55W Not suppor ted Not suppor ted When charging, only one input mode can be selected to charge the product. Only supported when chargingDCUSBOutput, not supportedACOutput;
6.3 ACOutput characteristics project Minimu m standa rd Maximu m Intr oduc tion s AC Output Jack AC power transfer Output peak power AC Out Wave 1 Meiji 300W 310W 600W sine wave Pool Set Voltages 12.8 ~ 16.8 V With PF1.0R Load Protection Off Output after Maximum Power Continues 200 ms Resistance R load THDV AC Frequency No-load output voltage Output voltage with load Inverter efficiency AC Effective Output Capacity amount AC output short circuit protection protect AC Overload Protection 59HZ 105V 5%
60HZ 120V 61HZ 130V 100V 120V 130V 85%
87%
210wh Load current at rated voltage 40%, 60%, 80%, 100%
The Average Efficiency of Four Points with R Load Plate End Ambient temperature 25 2 degrees, rated power test;
Support Turn off output, no damage to circuit, key recovery 1. ACThe load power is greater than the350WContinued3SPost-trigger 310W 350W 390W overloadProtection, OffAC, Key Recovery 2.DC + USB + ACThe load power is greater than the350WPost-trigger overloadProtection, OffAC, ReservationsDC/USBOutput, key recovery complex Turn off the AC output, button recovery Inverter overtemperatu re protection 85 6.4 DC5525 + Flare Output Characteristics project Minimu m standa rd Maximu m Intr oduc tion s DC5525 Port Cigarette Lighter Port No-load output voltage Load output voltage Output current Output current limiting protection Output short circuit protection 2 1 11V 12.8V 14V 10.5V 12.8V 13.8V Battery at 13.6V with load 12 V 10A 10.1A 11.5A 13A Two way 5525 + one way cigarette lighter total output Turn off output, no damage to circuit, key recovery Support Turn off output, no damage to circuit, key recovery Intr oduc tion s 6.5 USB-AOutput characteristics proj ect Minim um standa rd Maxi mum USB A port QC3.0 Output power 5V No-load output 5V Full Load Outputer 5V Positive Current 9V No-load output 9V Full Load Outputer 9V Positive 3 Support 18W 5V 5V 3A 9V 9V 4.6V 4.65V
8.6V 8.5V 5.5V 5.5V
9.5V 9.5V
2.0A
Current 12V No-load output 12V Full Load Outputer 12V Positive Current Automatic identification Output current limiting protection Output short circuit protection 11.6V 12 12.6V 11.5V 12V 12.5V
1.5A
Yes
3.1A 3.8A 4.5A Support Turn off the output, without damaging the circuit, automatic recovery 6.6 USB-COutput characteristics proj ect Minim um standa rd Maxim um USBC port PD3.0 Output power 5V No-load output 5V Full Load Outputer 1 Support 60W 4.6V 4.5V 5V 5V 5.5V 5.5V Intr oduc tion s 5V Positive Current 9V No-load output 9V Full Load Outputer 9V Positive Current 12V No-load output 12V Full Load Outputer 12V Positive Current 15V No-load Outputer 15V full load output 15V Positive Current 20V No-load output 20V full load output 20V Power Supply Current Automatic identification Output current limiting protection Output short circuit protection
8.6V 8.5V
3A 9V 9V 3A
9.5V 9.5V
11.6V 12V 12.5V 11.5V 12V 12.5V
3A
14.6V 15V 15.5V 14.5V 15V 15.5V
3A
19.5V 20V 21V 19.2V 20V 20.8V
3A Yes
3.1A 3.8A 4.5A Output voltage and current according to different load Turn off the output, do not damage the circuit, self-recovery Support Turn off the output, do not damage the circuit, self-recovery 6.7 Wireless charging and output characteristics project Wireless charging port Output power Output voltage Output current FOD Minimu m standard Maximu Introductions m 1 10W 5V 2A Support 4.8V 1.8A 5.3V 2.3A Temperature protection 60 65 70 Turn off the output, without damaging the circuit, automatic recovery 6.8 Energy saving and environmental protection characteristics project Minim um standa rd Maxim um Intr oduc tion s Automatic shutdown Whole machine working idle Power consumption When the whole machine shuts down since Electricity consumption Runtime noise Support 550mA 650mA The load power is 5 W; Continuous 3 H Automatic Shut Down Battery pack output14.6V, OpenDC.USB.ACMeasuring batteryB+
End access 1mA 70db Less than 35db when fan free and less than 70db when fan starts 6.9 Other project Minim um standa rd Maxim um Lighting power Illuminant brightness Illuminant color temperature Lights dormancy 5W 600LM 3000K 3H Intr oduc tion s Surface light source Distance 20CM Test After opening,3HInside unopened beltDC,USB ACAny function, Turn off the light and enter sleep;
7 Working environment project Minimum standa rd Maxim um Intr oduc tion s Charging operating temperature Discharge operating temperature Storage temperature Working humidity Storage humidity altitude 0 25 40 environmental temperature
-10 25 40 environmental temperature
-20 10%
45 75%
45%
2000 rice 27 25 23 Test ambient temperature If the battery is stored for more than three months, please use the charger with the specified parameter range to charge and discharge the product once. Charge to50%
8 Compliance with certification or testing standards According to the needs of customers can do the following certification or record:
UL2743 report / FCC-sDOC / FCC-ID / UN 38.3 / MSDS / UN box performance list /
dangerous package certificate, the cost is the customer's responsibility. Certific ation Program Certificatio n Implementati on Standards FCC-sDOC FCC 47 CFR Part 15 Subpart B: 2022 FCC-ID UL2743 UN38.3 FCC Part15 Subpart C, Paragraph 15.209 UL 2743. Edition 2. Revision 2020 ST/SG/AC.10/11/Rev.7/Amend.1 9 Product physical parameters The maximum size of the machine appearance:
244 * 171.4 * 177mm, The body weight:
3.81KG, 10 Packing list Spec ific atio ns 300W/288.6Wh G300 :142*210mm American Standard 15V4A 60W Seria l numbe r 1 2 3 name G300 User's manual AC Fit 11 Note Numb er 1 1 1 1. Do not put the product into water or rain!
2. Do not heat the product or approach the fire source! Do not disassemble or transform the product without authorization! Do not hit the product hard!
otherwiseMay cause battery overheating, short circuit, fire or failure of function, shortened life and other hazards. 3. Do not use or place this product in high temperatures (in hot sunlight or in very hot cars), otherwise it may cause overheating of the battery, fire or failure of function, short life, and other hazards. 4. Prohibit disassembly and disassembly of power supply 5. Prohibit short circuit of the power battery 6. Prohibit the use of non-dedicated charger to charge the power supply, it will be dangerous;
7. Do not directly touch the leaking battery, the leakage of electrolyte will cause skin discomfort, in case the electrolyte enters the eyes, rinse with water as soon as possible, do not rub the eyes, and quickly sent to the hospital;
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.