FCC ID: 2AGA9TWS05 True Wireless Earbuds

True Wireless Stereo EarbudsWith Touch Control Model: CCS15156 Use the suppliedType-C charging cable, plug the cableinto the Type-C port which is Packaging Contents:

1 pairs ofWireless Earbuds 1 Type-C Charging Cable 1 User Guide How to Use:

1. Charge YourWireless Earbuds 1.) Prior to use, charge your wireless earbuds located on the back of thecharging case. 2.) Charging case charging: the blueLED is flash. Charging case full charged: solid blue Charging case Blue LED size. Type- C Small Charging cable 2. Selecting the Right Fit Your wireless earbuds includethree sizes of earbud caps. They arepre-assembled with medium sizeearbud caps. Determine which onesprovide the best fit to achieve theoptimal listening experience. If the medium size earbud caps do not feel comfortable,pull them off and replace with another and Large earbud caps 3. Connecting / Wireless Pairing feet / 1 meter ) 1.) Make sure the earbudsand your Bluetooth device are next to each other (within 3 2.) Remove both earbuds from the charging case and place into your ears. 3.) Turn on your devices Bluetooth. Most devices will automatically detect your earbuds. Locate and select CCS15156. It will indicate that your earbuds are now connected or paired. Notes:

If your device does not automatically detect your earbuds, make sure Bluetooth is turned on, do a SEARCH for CCS15156 and then click CONNECT. To shut down, touch theMFB for 4 seconds or place back into the charging case. Once paired, the range is approximately 32 feet/10 meters.Your earbud will automatically connect to the last paired and connected device when it is turned on again 4. OperatingYour Wireless Earbuds Whenplaying music:

To skip to the next song, touch the right ear button for twice. To skip to the previous song, touch the left ear button for twice. To increase volume, touch the right ear button for 1 second. To decrease volume, touch the left ear button for 1 second. When on a call:

To answer or hang up a call, shorttouch the right or left ear button for 1 second. To reject an incoming call, touch the right or left ear button for 2-3 seconds. Low Battery Youll hear a voice prompt of Low battery when the battery level is less than 10%. EarbudLED Indicators When your wireless earbuds are charging the blue LED light is on. When your wireless earbudshave finished charging the blue LED light is off;. When your Bluetooth is being paired the blue LED light flash quickly. Troubleshooting If your wireless earbuds are not pairing together OR if both earbuds are not flashing blue, use the following instructions to reset and re-pair your earbuds:

1.) Remove both earbuds from the charging case and turn them OFF by touching both earbuds simultaneously until the blue lights slow flashes 3 times. Please note, do not cover entire earbuds with your finger or you will not see the blue light flash. 2.) Next, touch and hold down both earbuds simultaneously for approximately 13 seconds, until you see the blue lights quickly flash2 times. You will need to continue to hold and see the blue light flash a second time. This resets your earbuds.

/ 1 meter ) them out simultaneously;

3.) To pair your wireless earbuds, place both earbuds into the changing case, and take 4.) Make sure the earbuds and your Bluetooth device are next to each other (within 3 feet 5.) Turn on your devices Bluetooth. Most devices will automatically detect your earbuds. Locate and select CCS15156. It will indicate that your earbuds are now connected or If your device does not automatically detect your earbuds, make sure Bluetooth is turned on, do a SEARCH for CCS15156 and then click CONNECT. To shut down, touch theMFB for 4 seconds or place back into the charging case. Once paired, the range is approximately 32 feet/10 meters.Your earbud will automatically connect to the last paired and connected device paired. Notes:

when it is turned on again Label:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID:2AGA9TWS05

HUIZHOU WEIDE Electronics CO.,LTD Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AGA9TWS05 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type File Name Block Diagram Schematic Diagram Operational Description POFIT_Block POFIT_SCH POFIT_OPS The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application for180 days as outlined below:

Exhibit Type File Name Test Setup photo User Manual Internal Photos Test Setup Photos User Manual Internal Photos Sincerely, Signature:

Name: Jerry Wei Date: 2020/05/08

HUIZHOU WEIDE Electronics CO.,LTD Family models declaration letter. 2020-05-08 We HUIZHOU WEIDE Electronics CO.,LTD Of Jimadi Industrial Area, Boluo County, Huizhou, Guangdong, China. 516100 Product: True Wireless Earbuds Model Name: WD-TWS05,CCS15156 FCC ID: 2AGA9TWS05 Trade mark:

All models are the same circuit and RF module, except the appearance. Thanks Sincerely, Signature 2020-05-08 Jerry Wei E-mail:

Phone:

Address:

Jerry@weide96.com 86-7526203629 Jimadi Industrial Area, Boluo County, Huizhou, Guangdong, China. 516100

(HUIZHOU WEIDE Electronics CO.,LTD) Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020/05/08 SUBJECT: FCC Application for FCC ID: 2AGA9TWS05 To Whom It May Concern:

We, the undersigned, hereby authorize Alex Li NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei Community, Xixiang Street, Baoan District Shenzhen China Tel: +86-0755-61156584 Email: alex.li@ntek.org.cn on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by NTEK Testing Technology Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signatory 2020-05-08 Jerry Wei Applicant: HUIZHOU WEIDE Electronics CO.,LTD Address: Jimadi Industrial Area, Boluo County, Huizhou, Guangdong, China. 516100

HUIZHOU WEIDE Electronics CO.,LTD Date: May 08, 2020 FCC ID: 2AGA9TWS05 Model Number: WD-TWS05, CCS15156 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, HUIZHOU WEIDE Electronics CO.,LTD, declare that this EUT (FCC ID:

2AGA9TWS05) will conduct FCC compliance testing, the SDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.( ShenZhen Lab.). 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Baoan District, Shenzhen 518126 P.R. China) Please contact me if you have any question. Sincerely,

(Signed) Name / Title: Jerry Wei/ Business Director Company: HUIZHOU WEIDE Electronics CO.,LTD Address: Jimadi Industrial Area, Boluo County, Huizhou, Guangdong, China. 516100