FCC ID: TQ8-ACB10HSGG Car Audio System

 

K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 6 Audio system AUDIO (Without Touch Screen) System layout control panel

(1) AUDIO button

Press to display the radio/media mode selection window.

When the mode selection window dis-

plays, turn the [TUNE] knob to select the desired mode and then press the knob.

When the Mode popup is not selected in [MENU/CLOCK] Mode popup, press the [AUDIO] button on the control panel to change the mode. Each time you press the [AUDIO] but-

ton on the control panel, the mode switches to radio media in order.

(2) PHONE button

Press to start connecting a mobile phone via Bluetooth.

After a Bluetooth phone connection is made, press to access the Bluetooth phone menu.

(3) FAV button

While listening to the radio, press to move to next page of the preset list.

(4) POWER button/VOL knob

Press to turn the system on or off.

Turn to the left or right to adjust the sys-

tem sound volume.

(5) SEEK/TRACK button

Change the station/track/le.

While listening to the radio, press and hold to search for a station.

While playing media, press and hold to rewind or fast forward (except for the Bluetooth audio mode). The actual features in the vehicle may differ from the illustration. 5 6 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 7 Audio system

(6) MENU button/CLOCK button

Press to access the menu screen for

(7) TUNE knob/FILE knob/ENTER button

While listening to the radio, turn to

(8) Number buttons (1 RPT~ 4 BACK)

While listening to the radio, press to lis-

the current mode. adjust the frequency. ten to a saved radio station.

Press and hold to access the time setup screen.

While playing media, turn to search for a track/le (except for the Bluetooth audio mode).

While listening to the radio, press and hold to save the current radio station to the preset.

During a search, press to select the current track/le. The actual features in the vehicle may differ from the illustration.

In the USB/Bluetooth audio modes, press the [1 RPT] button to change the repeat play mode. Press the [2 SHFL]

button to change the shufe play mode.

Press the [4 BACK] button to return to the previous screen (except for the radio preset list). 75 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 8 Audio system System layout steering wheel remote control

(2) MODE button

Press to switch between radio and

(5) Call/Answer button

Press to start connecting a mobile media modes. phone via Bluetooth.

After a Bluetooth phone connec-

tion is made, press to access your call history. Press and hold to dial the most recent phone number. When a call comes in, press to answer the call.

During a call, press to switch between the active call and the held call. Press and hold to switch the call between the system and the mobile phone.

(6) Call end button

Press and hold to turn the system on or off. (if equipped)

(3) Volume lever

Push up or down to adjust the volume.

(4) Up/Down lever

Change the station/track/le.

While listening to the radio, push to listen to the previous/next saved radio station.

While listening to the radio, push and hold to search for a station.

While playing media, push and hold to rewind or fast forward

(except for the Bluetooth audio mode).

(Bluetooth equipped model) The actual features in the vehicle may differ from the illustration.

(1) MUTE button

Press to mute or unmute the sys-

tem.

During a call, press to mute or unmute the microphone.

While playing media, press to pause or resume playback. 5 8 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 9 WARNING

- About driving

Do not operate the system while driving. Driving while distracted may result in a loss of vehicle control, potentially leading to an accident, severe personal injury, or death. The drivers primary responsibility is the safe and legal operation of a vehicle, and any handheld devices, equipment, or vehicle systems which divert the dri-

vers attention this responsibility should never be used during operation of the vehicle. from

(Continued) Audio system

(Continued)

Avoid watching the screen while driving. Driving while distracted may lead to a trafc accident. Stop your vehicle in a safe location before using functions that require multiple operations.

Stop your vehicle rst before using your mobile phone. Using a mobile phone while driving may lead to a trafc accident. If necessary, use the Bluetooth Handsfree feature to make calls and keep the call as short as possible.

Keep the volume low enough to hear external sounds. Driving without the ability to hear external sounds may lead to a trafc accident. Listening to a loud volume for a long time may cause hear-

ing damage. WARNING

- About handling the system

Do not disassemble or modify the system. Doing so may result in an accident, re, or electric shock.

Do not allow liquids or foreign substances to enter the sys-

tem. Liquids or foreign sub-

stances may cause noxious fumes, a re, or a system mal-

function.

Stop using the system if it malfunctions, such as no audio output or display. If you continue using the system when it is malfunctioning, it may lead to a re, electric shock, or system failure.

Do not touch the antenna dur-

ing lightning because such an act may cause electric shock. thunder or 95 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 10 Audio system CAUTION

- About operating the system

Use the system with the engine running. Using the system for a long time when the engine is stopped may dis-

charge the battery.

Do not install unapproved products. Using unapproved products may cause an error while using the system. System errors caused by installing unapproved prod-

ucts are not covered under the warranty. 5 10

(Continued)

If you want to change the posi-

tion of the installed device, please inquire with your place of purchase or service mainte-

nance centre. Technical expertise is required to install or disassemble the device. NOTICE If you experience any problems with the system, contact your place of purchase or dealer. Placing the audio system within an electromagnetic environment may result in noise interference. CAUTION

- About handling the system

Do not apply excessive force to the system. Excessive pres-

sure on the screen may dam-

age the LCD panel or the touch panel.

When cleaning the screen or button panel, make sure to stop the engine and use a soft, dry cloth. Wiping the screen or buttons with a rough cloth or using solvents

(alcohol, benzene, paint thin-

ner, etc.) may scratch or chemically damage the sur-

face.

If you attach a liquid-type air freshener to the fan louvre, the surface of the louvre may become deformed due to the owing air.

(Continued) K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 11 Turning the system on or off To turn on the system, start the engine.

If you do not want to use the sys-

tem while driving, you can turn off the system by pressing the

[POWER] button on the control panel. To use the system again, press the [POWER] button again. The system turns off when you stop the engine(ACC Off).

When you turn back on the sys-

tem, the previous mode and set-

tings will remain intact. WARNING

Some functions may be dis-

abled for safety reasons while the vehicle is moving. They work only when the vehicle stops. Park your vehicle in a safe location before using any of them.

Stop using the system if it malfunctions, such as no audio output or display. If you continue using the system when it is malfunctioning, it may lead to a fire, electric shock, or system failure. CAUTION You can turn on the system when the key ignition switch is placed in the ACC or ON position. Using the system for an extended period without the engine running drains the bat-

tery. If you plan on using the system for a long time, start the engine. Audio system Turning the display on or off To prevent glare, you can turn off the screen. The screen can be turned off only while the system is on. 1. On the control panel, press the

[MENU/CLOCK] button. 2. When the option selection window displays, turn the [TUNE] knob to select Display off, and then press the knob.

To turn the screen back on, press any of the control panel buttons. 115 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 12 Audio system Getting to know the basic operations You can select an item or adjust the settings by using the number buttons and the [TUNE] knob on the control panel. Selecting an item Numbered items Press the corresponding number button. Numberless items Turn the [TUNE] knob to select the desired item, and then press the knob. Adjusting the settings Turn the [TUNE] knob to adjust the value, and then press the knob to save changes. Turn the [TUNE] knob to the right to increase the value and turn the

[TUNE] knob to the left to decrease the value. 5 12 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 13 RADIO Turning on the radio 1. On the control panel, press the

[AUDIO] button. 2. When the mode selection window displays, turn the [TUNE] knob to select the desired radio mode and then press the knob. FM/AM Mode

(1) Current radio mode

(2) Radio station information

(3) Preset list Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Autostore: Save radio stations to the preset list.

Scan: The system searches for radio stations with strong radio sig-

nals and plays each radio station for about ve seconds.

Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

- Position: Select a location where sound will be concentrat-

ed in the vehicle. Select Fade

(Fader) or Balance, turn the

[TUNE] knob the desired position, and then press the knob. To set sound to be cen-

tred in the vehicle, select Centre.

- Equaliser (Tone): Adjust the out-

put level for each sound tone mode. to select

- Speed dependent vol.: Set the volume to be adjusted automati-

cally according to your driving speed.

Mode popup: Set to display mode selection window when the

[AUDIO] button is pressed on the control panel. Audio system NOTICE Depending on vehicle models or specications, available options may vary. Depending on the system or ampli-

er specications applied to your vehicle, available options may vary.

Date/Time: You can change the date and time that are shown on the system display.

- Set date: Set date to display on the system display.

- Set time: Set time to display on the system display.

- Time format: Select to display time in the 12 hour format or the 24 hour format.

- Display (Power Off): Set to dis-

play the clock when the system power is off.

Language: You can change the display language. 135 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 14 Audio system FM/AM Mode (With RDS)

(1) Current radio mode

(2) Radio station information

(3) Preset list Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Trafc announcement: Activate or deactivate trafc announcements. Announcements and programmes will be received automatically if available.

Autostore: Save radio stations to the preset list.

Scan: The system searches for radio stations with strong radio sig-

nals and plays each option for about ve seconds. 5 14

Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

- Position: Select a location where sound will be concentrat-

ed in the vehicle. Select Fade

(Fader) or Balance, turn the

[TUNE] knob the desired position, and then press the knob. To set sound to be cen-

tred in the vehicle, select Centre.

- Equaliser (Tone): Adjust the out-

put level for each sound tone mode. to select

- Speed dependent vol.: Set the volume to be adjusted automati-

cally according to your driving speed. NOTICE Depending on vehicle models or specications, available options may vary. Depending on the system or ampli-

er specications applied to your vehicle, available options may vary.

Mode popup: Set to display mode selection window when the

[AUDIO] button is pressed on the control panel.

Date/Time: You can change the date and time that are shown on the system display.

- Set date: Set date to display on the system display.

- Set time: Set time to display on the system display.

- Time format: Select to display time in the 12 hour format or the 24 hour format.

- Display (Power Off): Set to dis-

play the clock when the system power is off.

Language: You can change the display language. K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 15 DAB Mode

(1) Current radio mode

(2) Radio station information

(3) Preset list Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Traffic announcement: Activate or deactivate traffic announce-

ments. Announcements and pro-

grammes will be received automat-

ically if available.

List: Display all available radio sta-

tions.

Scan: The system searches for radio stations with strong radio sig-

nals and plays each option for about five seconds.

Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

- Position: Select a location where sound will be concentrat-

ed in the vehicle. Select Fade

(Fader) or Balance, turn the

[TUNE] knob the desired position, and then press the knob. To set sound to be cen-

tred in the vehicle, select Centre.

- Equaliser (Tone): Adjust the out-

put level for each sound tone mode. to select

- Speed dependent vol.: Set the volume to be adjusted automati-

cally according to your driving speed. NOTICE Depending on vehicle models or specications, available options may vary. Depending on the system or ampli-

er specications applied to your vehicle, available options may vary. Audio system

Mode popup: Set to display mode selection window when the

[AUDIO] button is pressed on the control panel.

Date/Time: You can change the date and time that are shown on the system display.

- Set date: Set date to display on the system display.

- Set time: Set time to display on the system display.

- Time format: Select to display time in the 12 hour format or the 24 hour format.

- Display (Power Off): Set to dis-

play the clock when the system power is off.

Language: You can change the display language. 155 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 16 Audio system Changing the radio mode 1. On the control panel, press the

[AUDIO] button. 2. When the mode selection window displays, turn the [TUNE] knob to select the desired radio mode and then press the knob.

Each time you press the

[MODE] button on the steering wheel, the radio mode switches to FM AM in order. NOTICE When the Mode popup is not selected in [MENU/CLOCK] Mode popup, press the [AUDIO]

button on the control panel to change the radio mode. Each time you press the [AUDIO]

button on the control panel, the radio mode switches to FM DAB(if equipped) AM in order. Scanning for available radio stations You can listen to each radio station for a few seconds to test the recep-

tion and select the one you want. 1. From the radio screen, press the

[MENU/CLOCK] button on the control panel. 2. When the option selection window displays, turn the [TUNE] knob to select Scan, and then press the knob.

The system searches for radio stations with strong radio sig-

nals and plays each radio sta-

tion for about ve seconds. 3. When you nd the radio station you want to listen to, press the

[TUNE] knob.

You can continue listening to the selected station. Searching for radio stations To search for the previous or next available radio station, press the

[ SEEK] button / [TRACK ] button on the control panel.

You can also press and hold the

[ SEEK] button / [TRACK ] but-

ton to search for frequencies quick-

ly. When you release the button, a radio station with a strong signal is selected automatically. If you know the exact frequency of the radio station you want to listen to, turn the [TUNE] knob on the control panel to change the frequency. 5 16 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 17 Saving radio stations You can save your favourite radio stations and listen to them by select-

ing them from the preset list. Saving the current radio station While listening to the radio, press and hold the desired number button on the control panel.

The radio station you are listening to will be added to the selected number.

To save the next page of the preset list, press the [FAV] button. Saving the current radio station While listening to the radio, press and hold the desired number button on the control panel.

The radio station you are listening to will be added to the selected number.

To save the next page of the preset list, press the [FAV] button. NOTICE You can save up to 12 radio sta-

tions in each mode. If a station is already saved to the selected preset number, the station will be replaced by the station you are listening to. Audio system Using the auto save function You can search for radio stations in your area where there is a strong sig-

nal. The results of your search can be saved to the preset list automati-

cally. 1. From the radio screen, press the

[MENU/CLOCK] button on the control panel. 2. When the option selection window displays, turn the [TUNE] knob to select Autostore, and then press the knob. Listening to saved radio sta-

tions FM/AM Mode 1. Conrm the preset number for the radio station you want to listen to.

To view the next page of the pre-

set list, press the [FAV] button. 2. On the control panel, press the desired number button.

Alternatively, push the Up/Down lever on the steering wheel to change the station. 175

(Continued) When the equaliser function of the connected device and Equaliser

(Tone) settings of the system are both activated, the effects may interfere with each other and may lead to sound degradation or dis-

tortion. Deactivate the devices equaliser function if possible. K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 18 Audio system MEDIA PLAYER Using the media player You can play music stored in various media storage devices, such as USB storage devices, smartphones. 1. Connect a device to the USB port in your vehicle.

Playback may start immediately depending on the device that you connect to the system. 2. On the control panel, press the

[AUDIO] button. 3. When the mode selection window displays, turn the [TUNE] knob to select the desired mode and then press the knob. 5 18 NOTICE To start the media player, press the [AUDIO] button on the control panel. You can also change the mode by press the [MODE] button repeat-

edly on the steering wheel. Make sure to connect or discon-

nect external USB devices with the system power turned off. When the Mode popup is not selected in [MENU/CLOCK] Mode popup, press the [AUDIO]

button on the control panel to change the media player. Each time you press the [AUDIO]

button on the control panel, the media mode switches to USB Bluetooth audio in order. Depending on vehicle models and specications, available buttons or the appearance and layout of the USB port in your vehicle may vary. Do not connect a smartphone or an MP3 device to the system via multiple methods such as USB, Bluetooth, simultaneously. Doing so may cause a distorted noise or a system malfunction.

(Continued) K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 19 Using the USB mode You can play media les stored in portable devices, such as USB stor-

age devices and MP3 players. Check compatible USB storage devices and le specications before using the USB mode. Connect your USB device to the USB port in the vehicle.

Playback starts immediately.

Press the [AUDIO] button on the control panel to display the mode selection window, turn the [TUNE]

knob to select USB and then press the knob.

(1) Current le number and total number of les

(2) Playback time

(3) Information about the song cur-

rently playing Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

List: Access the le list.

Folder List: Access the folder list.

Information: Display information about the song currently playing.

Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

- Position: Select a location where sound will be concentrat-

ed in the vehicle. Select Fade

(Fader) or Balance, turn the

[TUNE] knob the desired position, and then press the knob. To set sound to be cen-

tred in the vehicle, select Centre.

- Equaliser (Tone): Adjust the out-

put level for each sound tone mode. to select

- Speed dependent vol.: Set the volume to be adjusted automati-

cally according to your driving speed. Audio system information

Song information (Media Display):

Select such as Folder/File or Artist/Title/Album to display when playing MP3 les.

Mode popup: Set to display mode selection window when the

[AUDIO] button is pressed on the control panel. NOTICE Depending on vehicle models or specications, available options may vary. Depending on the system or ampli-

er specications applied to your vehicle, available options may vary. 195 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 20 Audio system

Date/Time: You can change the date and time that are shown on the system display.

- Set date: Set date to display on the system display.

- Set time: Set time to display on the system display.

- Time format: Select to display time in the 12 hour format or the 24 hour format.

- Display (Power Off): Set to dis-

play the clock when the system power is off.

Language: You can change the display language. Rewinding/Fast forwarding On the control panel, press and hold the [ SEEK] button / [TRACK ]

button.

You can also push and hold the Up/Down lever on the steering wheel. 5 20 Restarting the current playback On the control panel, press the

[TRACK ] button.

You can also push the Down lever on the steering wheel. Playing repeatedly On the control panel, press the

[1 RPT] button. The repeat play mode changes each time you press it. The corresponding mode icon will be displayed on the screen. Playing the previous or next song To play the previous song, press the

[TRACK ] button twice on the con-

trol panel. To play the next song, press the [ SEEK] button on the control panel.

You can also use the Up/Down lever on the steering wheel. NOTICE Press the [MENU] button on the control panel to display the mode selection window, turn the [TUNE]

knob to nd the desired song and press the knob to play the le. Playing in random order On the control panel, press the

[2 SHFL] button. The shufe play mode is activated or deactivated each time you press it. When you activate the shufe mode, the corre-

sponding mode icon will be displayed on the screen. Searching folders 1. On the control panel, press the

[MENU/CLOCK] button. 2. When the option selection window displays, turn the [TUNE] knob to select the Folder List and then press the knob. 3. Navigate to the desired folder in the Folder List and then press the

[TUNE] knob.

The rst song in the selected folder will be played. K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 21

(Continued)

Do not use a USB device for purposes other than playing les. Using USB accessories for charging or heating may cause poor performance or a system malfunction. CAUTION

Start the engine of your vehi-

cle before connecting a USB device to your system. Starting the engine with a USB device connected to the sys-

tem may damage the USB device.

Be careful of static electricity when connecting or discon-

necting a USB device. A static discharge may cause a sys-

tem malfunction.

Be careful not to let your body or external objects contact the USB port. Doing so may cause an accident or a system mal-

function.

Do not connect and discon-

nect a USB connector repeat-

edly in a short time. Doing so may cause an error in the device or a system malfunc-

tion.

(Continued) Audio system NOTICE When connecting a USB storage device, do not use an extension cable. Connect it directly to the USB port. If you use a USB hub or an extension cable, the device may not be recognized. Fully insert a USB connector into the USB port. Failure to do so may cause a communication error. When you disconnect a USB stor-

age device, a distorted noise may occur. The system can play only les encoded in a standard format. The following types of USB devices may not be recognised or work correctly:

- Encrypted MP3 players

- USB devices not recognised as removable disks A USB device may not be recog-

nised depending on its condition. Some USB devices may be incom-

patible with your system. Depending on the USB devices type, capacity, or the format of les, USB recognition time may be longer. Image and video playback are not supported. 215 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 22 Audio system technology. BLUETOOTH Connecting Bluetooth devices Bluetooth is a short-range wireless networking Via Bluetooth, you can connect nearby mobile devices wirelessly to send and receive data between connected devices. This enables you to use your devices effectively. To use Bluetooth, you must rst con-

nect a Bluetooth-enabled device to your system, such as a mobile phone or an MP3 player. Ensure that the device you want to connect supports Bluetooth. WARNING

Park your vehicle in a safe location before connecting Bluetooth devices. Distracted driving can cause a trafc accident and lead to personal injury or death. 5 22 NOTICE On your system, you can use only Bluetooth Handsfree and Audio features. Connect a mobile device that supports both features. Some Bluetooth devices may cause malfunctions to the audio system or make interference noises. In this case, storing the device in a different location may resolve the problem. Depending on the connected Bluetooth device or mobile phone, some functions may not be sup-

ported. For Bluetooth supporting devices details and compatibility, visit http://kiaeurope.nextgen-

technology.net. If the system is not stable due to a vehicle-Bluetooth device commu-

nication error, delete the paired devices and connect the Bluetooth devices again.

(Continued)

(Continued) If Bluetooth connection is not sta-

ble, follow these steps to try again. 1. Deactivate Bluetooth and reac-

tivate it on the device. Then, reconnect the device. 2. Turn the device off and on. Then, reconnect it. 3. Remove the battery from the device and reinstall it. Then, turn the device on and recon-

nect it. 4. Unregister the Bluetooth pair-

ing on both the system and the device and then re-register and connect them. The Bluetooth connection is unavailable when the devices Bluetooth function is turned off. Be sure to turn on the devices Bluetooth function. K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 23 Pairing devices with your system For Bluetooth connections, rst pair your device with your system to add it to the systems list of Bluetooth devices. You can register up to ve devices. 1. From the control panel, press the

[PHONE] button, and then select Phone Add new device.

If you are pairing a device with your system for the rst time or there is no connected devices, you can also press the Call/Answer button on the steer-

ing wheel. 2. On the Bluetooth device you want to connect, activate Bluetooth, search for your vehicles system, and then select it.

Check the systems Bluetooth name, which is displayed in the new registration pop-up window on the system screen. 3. Enter or conrm the passkey to conrm the connection.

If the passkey input screen is the Bluetooth displayed on the device passkey 0000 which is dis-

played on the system screen. screen, enter ensure

If the 6-digit passkey is dis-

played on the Bluetooth device screen, the Bluetooth passkey displayed on the Bluetooth device is the same as the passkey on the system screen and conrm the connec-

tion from the device. that NOTICE The screen image in this manual is an example. Check your system screen for the exact vehicle name and Bluetooth device name.

(Continued) Audio system

(Continued) The default passkey is 0000. It may take a while for the system to connect with the device after you permit the system to access the device. When a connection is made, the Bluetooth status icon appears at the top of the screen. You can change the permission settings via the mobile phones Bluetooth settings menu. For more information, refer to your mobile phones user guide. To register a new device, repeat steps 1 to 3. to the If you use the automatic Bluetooth connection function, a call may be switched vehicles Handsfree when you are taking on the phone near the vehicle while the vehicles engine is on. If you do not want the system to connect with the device automatically, deactivate Bluetooth on your device. When a device is connected to the system via Bluetooth, the devices battery may discharge faster. 235 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 24 NOTICE If a connection ends because a device is out of the connection range or a device error occurs, the connection will be restored auto-

matically when the device enters the connection range or when the error is cleared. Depending on auto connection pri-

ority, connection to a device may take time. Disconnecting a device If you want to stop using a Bluetooth device or connect another device, disconnect your currently connected device. 1. From the control panel, press the

[PHONE] button, and then select Phone Paired devices. 2. Turn the [TUNE] knob to select your currently connected device and then press the knob. 3. Press the [1 RPT] button to select Yes. Audio system Connecting a paired device To use a Bluetooth device on your system, connect the paired device to the system. Your system can connect with only one device at a time. 1. From the control panel, press the

[PHONE] button, and then select Phone Paired devices.

If there is no connected device, press the Call/Answer button on the steering wheel. 2. Turn the [TUNE] knob to select the device to connect, and then press the knob.

If another device is already con-

nected to your system, discon-

nect it. Select the connected device to disconnect. 5 24 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 25 Deleting paired devices If you no longer want a Bluetooth device paired or if you want to con-

nect a new device when the Bluetooth device list is full, delete paired devices. 1. From the control panel, press the

[PHONE] button, and then select Phone Delete devices. 2. Turn the [TUNE] knob to select the device to delete, and then press the knob. 3. Press the [1 RPT] button to select Yes. NOTICE When you delete a paired device, the Call history and Contacts stored in the system are also deleted. To re-use a deleted device, you must pair the device again. Using a Bluetooth audio device You can listen to music stored in the connected Bluetooth audio device via your vehicles speakers. 1. On the control panel, press the

[AUDIO] button. 2. When the mode selection window displays, turn the [TUNE] knob to select Bluetooth audio and then press the knob.

(1) Information about the song cur-

rently playing 1. Press the [MENU/CLOCK] button on the control panel to access the following a menu option. 2. Turn the [TUNE] knob to select option and then press the knob. Audio system

Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.

- Position: Select a location where sound will be concen-

trated in the vehicle. Select Fade (Fader) or Balance, turn the [TUNE] knob to select the desired position, and then press the knob. To set sound to be centred in the vehicle, select Centre.

- Equaliser (Tone): Adjust the output level for each sound tone mode.

- Speed dependent vol.: Set the volume to be adjusted automatically according to your driving speed. NOTICE Depending on vehicle models or specications, available options may vary. Depending on the system or ampli-

fier specifications applied to your vehicle, available options may vary. 255 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 26 Audio system

Mode popup: Set to display mode selection window when the [AUDIO] button is pressed on the control panel.

Date/Time: You can change the date and time that are shown on the system display.

- Set date: Set date to display on the system display.

- Set time: Set time to display on the system display.

- Time format: Select to display time in the 12 hour format or the 24 hour format.

- Display (Power Off): Set to display the clock when the system power is off.

Language: You can change the display language. 5 26 Pausing/Resuming playback To pause playback, press the [TUNE]

knob on the control panel. To resume playback, press the [TUNE] knob again. Restarting the current playback On the control panel, press the

[TRACK ] button.

You can also push the Down lever on the steering wheel. Playing the previous or next song To play the previous song, press the

[TRACK ] button twice on the con-

trol panel. To play the next song, press the [ SEEK] button on the control panel.

You can also use the Up/Down lever on the steering wheel. NOTICE Depending connected Bluetooth device or mobile phone, playing the previous/next song may not be supported. the on Playing repeatedly On the control panel, press the

[1 RPT] button. The repeat play mode changes each time you press it. The corresponding mode icon will be displayed on the screen. Playing in random order On the control panel, press the

[2 SHFL] button. The shufe play mode is activated or deactivated each time you press it. When you activate the shufe mode, the corre-

sponding mode icon will be displayed on the screen. K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 27

(Continued) Moving the track up/down while playing Bluetooth audio mode may result in pop noises with some mobile phones. The Rewinding/Fast forwarding function is not supported in the Bluetooth audio mode. The playlist feature is not support-

ed in the Bluetooth audio mode. If the Bluetooth device is discon-

nected, Bluetooth audio mode will end. NOTICE Depending on the connected Bluetooth device, mobile phone, or the music player you are using, playback controls may differ. Depending on the music player you are using, streaming may not be supported. Depending on the connected Bluetooth device or mobile phone, some functions may not be sup-

ported. If a Bluetooth enabled phone is being used to play music and it receives or makes a phone call, the music will stop. Receiving an incoming call or making an outgoing call while playing Bluetooth audio may result in audio interference. If you use the Bluetooth phone mode while using Bluetooth audio, playback may not automatically resume after you end the call depending on the connected mobile phone.

(Continued) Audio system Using a Bluetooth phone You can use Bluetooth to talk on the phone hands free. View call informa-

tion on the system screen, and make or receive calls safely and conve-

niently via the vehicles built-in micro-

phone and speakers. WARNING

Park your vehicle in a safe location before connecting Bluetooth devices. Distracted driving can cause a trafc accident and lead to personal injury or death.

Never dial a phone number or pick up your mobile phone while driving. Use of a mobile phone may distract your attention, making it difcult to recognize external conditions and reducing the ability to cope with unexpected situa-

tions, which may lead to an accident. If necessary, use the Bluetooth Handsfree feature to make calls and keep the call as short as possible. 275 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 28 Making a call If your mobile phone is connected to the system, you can make a call by selecting a name from your call his-

tory or contacts list. 1. On the control panel, press the

[PHONE] button.

Alternatively, press the Call/

Answer button on the steering wheel. 2. Select a phone number.

To select a phone number from list, select favourites your Favourites.

To select a phone number from your call history, select Call his-

tory.

To select a phone number from your contacts list that down-

loaded the connected mobile phone, select Contacts. 3. To end the call, press the [2 SHFL]

from button on the control panel.

Alternatively, press the Call end button on the steering wheel. Audio system NOTICE You cannot access the Phone screen if there is no connected mobile phone. To use the Bluetooth phone function, connect a mobile phone to the system. The Bluetooth Handsfree function may not work when you are pass-

ing out of the cellular service cov-

erage area, such as when you are in a tunnel, underground, or in a mountainous area. Call quality may be degraded in the following environments:

- The reception of the mobile phone is poor

- The inside of the vehicle is noisy

- The mobile phone is placed near metallic objects, such as a bever-

age can. Depending on the connected mobile phone, the volume and sound quality of the Bluetooth Handsfree may vary. 5 28 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 29 Using the favourites list 1. From the Phone screen, turn the

[TUNE] knob on the control panel to select Favourites, and then press the knob. 2. Turn the [TUNE] knob to select the desired contact, and then press the knob to make a phone call. Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Add new favourites: Add a fre-

quently used phone number to favourites.

Delete items: Delete a selected favourites item.

Delete all: Delete all favourites items. NOTICE You can register up favourites for each device. to 20 You must rst download the con-

tacts to the system to register favourites. The favourites list saved on the mobile phone is not downloaded to the system. Even if the contact information on the mobile phone is edited, the favourites on the system are not automatically edited. Delete and add the item to favourites again. When you connect a new mobile phone, your favourites set for the previous mobile phone will not be displayed, but they will remain in your system until you delete the previous phone from the device list. Audio system Using your call history 1. From the Phone screen, turn the

[TUNE] knob on the control panel to select Call history, and then press the knob. 2. Turn the [TUNE] knob to select the desired entry, and then press the knob to make a phone call. Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing menu options:

Download: Download your call

All calls: View all call records.

Dialled calls: View only dialled

Received calls: View only received calls.

Missed calls: View only missed history. calls. calls. 295 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 30 Audio system NOTICE Some mobile phones may not sup-

port the download function. The call history is accessed only after downloading the call history when the mobile phone is connect-

ed to the system. Calls from restricted IDs are not saved on the call history list. Up to 50 call records will be down-

loaded per individual list. Call duration and time informa-

tion will not be displayed on the system screen. Permission is required to down-

load your call history from the mobile phone. When you attempt to download data, you may need to permit the download on the mobile phone. If the download fails, check the mobile phone screen for any notication or the mobile phones permission setting. When you download your call his-

tory, any old data will be deleted. 5 30 Using the contacts list 1. From the Phone screen, turn the

[TUNE] knob on the control panel to select Contacts, and then press the knob. 2. Turn the [TUNE] knob to select the desired group of alphanumeric characters, and then press the knob. 3. Turn the [TUNE] knob to select the desired contact, and then press the knob to make a phone call. Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing a menu option:

Download: Download your mobile phone contacts. NOTICE Contacts can be viewed only when the Bluetooth device is connected. Only contacts in the supported format can be downloaded and displayed from the Bluetooth device. Contacts from some appli-

cations will not be included. Up to 2,000 contacts can be down-

loaded from your device. Some mobile phones may not sup-

port the download function. Depending on the systems speci-

cations, some of the downloaded contacts may be lost. Contacts stored both in the phone and in the SIM card are down-

loaded. With some mobile phones, contacts in the SIM card may not be downloaded. Special characters and gures used in the contact name may not be displayed properly.

(Continued) K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:15 PM Page 31 Audio system NOTICE Depending on the mobile phone type, call rejection may not be supported. Once your mobile phone is con-

nected to the system, the call sound may be output through the vehicles speakers even after you exit the vehicle if the phone is within the connection range. To end the connection, disconnect the device from the system or deacti-

vate Bluetooth on the device.

(Continued) Permission is required to down-

load contacts from the mobile phone. When you attempt to download data, you may need to permit the download on the mobile phone. If the download fails, check the mobile phone screen for any notication or the mobile phones permission setting. Depending on the mobile phone type or status, downloading may take longer. When you download your con-

tacts, any old data will be deleted. You cannot edit or delete your contacts on the system. When you connect a new mobile phone, your contacts downloaded from the previous mobile phone will not be displayed, but they will remain in your system until you delete the previous phone from the device list. Answering calls When a call comes in, a notication pop-up window of the incoming call appears on the system screen. To answer the call, press the [1 RPT]

button on the control panel.

Alternatively, press the Call/

Answer button on the steering wheel. To reject the call, press the [2 SHFL]

button on the control panel.

Alternatively, press the Call end button on the steering wheel. 315 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:16 PM Page 32 Audio system Using options during a call During a call, you will see the call screen shown below. Press a button to perform the function you want. Press the [MENU/CLOCK] button on the control panel to access the fol-

lowing a menu option:

Microphone Volume (Outgoing Volume): Adjust the microphone volume or turn off the microphone so the other party cannot hear you. To switch the call to your mobile phone, press the [1 RPT] button on the control panel.

Alternatively, press and hold the Call/Answer button on the steering wheel. To end the call, press the [2 SHFL]

button on the control panel.

Alternatively, press the Call end button on the steering wheel. 5 32 NOTICE If the caller information is saved in your contacts list, the callers name and phone number will be displayed. If the caller informa-

tion is not saved in your contacts list, only the callers phone num-

ber will be displayed. You cannot switch to any other screen, such as the audio screen or the settings screen, during a Bluetooth call. Depending on the mobile phone type, call quality may vary. On some phones, your voice may be less audible to the other party. Depending on the mobile phone type, the phone number may not be displayed. Depending on the mobile phone type, the call switching function may not be supported. K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:16 PM Page 33 SYSTEM STATUS ICONS Status icons appear at the top of the screen to display the current system status. Familiarise yourself with the status icons that appear when you perform certain actions or functions and their meanings. Audio system NOTICE The battery level displayed on the screen may differ from the battery level displayed on the connected device. The signal strength displayed on the screen may differ from the sig-

nal strength displayed on the con-

nected mobile phone. Depending on vehicle models and specications, some status icons may not be displayed. Bluetooth Icon Description Battery level Bluetooth device of connected Mobile phone or audio device con-

nected via Bluetooth Bluetooth call in progress Microphone Bluetooth call turned off during Downloading call history from a mobile phone connected via Bluetooth to the system Downloading contacts from a mobile phone connected via Bluetooth to the system Signal strength Icon Description Signal strength of the mobile phone connected via Bluetooth 335 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:16 PM Page 34 Audio system AUDIO SYSTEM SPECIFICATIONS USB Supported audio formats

Audio le specication

- WAVeform audio format

- MPEG1/2/2.5 Audio Layer3

- Windows Media Audio Ver 7.X/8.X

Bit rates

- MPEG1 (Layer3):

32/40/48/56/64/80/96/112/128/

160/192/224/256/320 kbps

- MPEG2 (Layer3):

8/16/24/32/40/48/56/64/80/96/

112/128/144/160 kbps

- MPEG2.5 (Layer3):

8/16/24/32/40/48/56/64/80/96/

112/128/144/160 kbps

- WMA (High Range):

48/64/80/96/128/160/192 kbps

Bits Per Sample

- WAV (PCM(Stereo)): 24 bit

- WAV (IMA ADPCM): 4 bit

- WAV (MS ADPCM): 4 bit

Sampling frequency

- MPEG1: 44100/48000/32000 Hz

- MPEG2: 22050/24000/16000 Hz

- MPEG2.5: 11025/12000/8000 Hz

- WMA: 32000/44100/48000 Hz

- WAV: 44100/48000 Hz length of folder/le names (Based on Unicode): 40 English or Korean characters

Maximum

Supported characters for folder/le names (Unicode support): 2,604 Korean characters, 94 alphanu-

meric characters, 4,888 Chinese characters in common use, 986 special characters

Maximum number of folders: 1,000

Maximum number of les: 5,000 NOTICE Files that are not in a supported format may not be recognised or played, or information about them, such as the le name, may not be displayed properly. Only les with .mp3/.wma/.wav extensions can be recognised by the system. If the le is not in sup-

ported format, change the le for-

mat by using the latest encoding software. The device will not support les locked by DRM(Digital Rights Management). For MP3/WMA compression les and WAV le, differences in sound quality will occur depending on the bitrate. (Music les with a higher bitrate have a better sound quality.) Japanese or Simplied Chinese characters in folder or le names may not be displayed properly. 5 34 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:16 PM Page 35 Audio system Supported USB storage devices

Byte/Sector: 64 kbyte or less

Format system: FAT12/16/32 (rec-

ommended), exFAT/NTFS Bluetooth

Bluetooth Power Class 2: -6 to 4 dBm

Frequency range: 2402 ~ 2480 MHz NOTICE Operation is guaranteed only for a metal cover type USB storage device with a plug type connector.

- USB storage devices with a plas-

tic plug may not be recognised.

- USB storage devices in memory card types, such as CF card or SD cards, may not be recog-

nised. USB hard disk drives may not be recognised. When you use a large capacity USB storage device with multiple logical drives, only les stored on the rst drive will be recognised. If an application program is loaded on a USB storage device, the corresponding media les may not play. Use USB 2.0 devices for better compatibility. 355 K_QLe 19PE_4.0V[EE,EG]AUD_NVVH003:YF eng 4c-Audio.qxd 6/14/2018 2:16 PM Page 36 Audio system TRADEMARKS Other trademarks and trade names are those of their respective owners.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by KIA is under licence. 5 36 Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

 

 

 

 

 

 

 

 

 

 

2} &ot.pdf - Adobe Acrobat - 4 - 02.ACBBOHOKN_IC_2 - a 271 sw SeeH = 101M 2 se = = 2 27

(-IPRBSRPa|SeorveRQeO aexaa~ | [2 O > t cen y 21610 < t U 17az020221 cond 2016 2.98 2 . 1]7| hk ] | @ [> |-]| 8 B =? HY 24 og =

= aa a i acegocsan_s Di Application Form mies ACBBOH9KN_Label.pdf - Adobe Acrobat - 9 Lane =

Bee ad nao BO 271M ew Sse Part No: Daw I are sel He- |PASRPae|#eRVRRaBsh wena | [

Model AVCAOJSKN Froquency tange: ike Baris 1]7| hk ] | @ [> |-]| 8 B a7 MY 24 ver : 2 5 A vy & A kHz S eZ i Sn T00 ) feadrawing ca HP_RECOVERY (F) SSFS FP ht-o8sachct-0858-hp)

' ! jeong hyun choigjeonghyunche

' ! f FF owner(dykim) area

' ' _ | PF esseae-n

| =e Mo a MOBIS

' 1 Q | tesation @& y=E93 Ge y=e93

| | o0) | IC: 5074A-ACBBOH9KN

| Ll MODEL: ACBBOH9KN

' | oO was uw wiNAV

' VKGDB00051 This device complies with part 15 of the FCC Rules. AACA Operation Is Subject to the following two condltlons : So

(1) this device may not cause harmful interference, and (oO

(2) this device must accept any interference received, a including interference that may cause undesired operation

-3 HYUNDAI MOBIS Co., Ltd Y A 420x297mm < > ee eed 5 i Ee eee eS |e S|

) oo

 

 

Date : Nov. 9, 2017 Rev : 2.3 Agent Authorization FCC Letter HACS-F004 FCC Agent Authorization Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC Date : Nov. 9, 2017 Rev : 2.3 REVISION TABLE Rev 1.0 2.0 2.1 2.2 2.3 Description of Change Original Release(Obsolete) Updated template(Obsolete) Updated address(Obsolete) Updated address Fixed Typo Agent Date 06/14/2012 10/01/2012 01/10/2014 11/18/2016 11/09/2017 Approved QM QM QM QM QM HACS-F004 FCC Agent Authorization Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC HYUNDAI MOBIS CO., Ltd DATE : Feb 27, 2020 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern:

Subject : FCC Agent Authorization Letter for FCC ID : TQ8-ACB10HSGG We, the undersigned, hereby authorize HCT CO.,LTD to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT CO.,LTD on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement. This authorization is valid until further written notice from the applicant. Sincerely, Signed by:

Seung Hoon Choe / Representative HYUNDAI MOBIS CO., LTD 203, Teheran-ro Gangnam-gu, Seoul, South Korea HACS-F004 FCC Agent Authorization Letter Rev : 2.3

 

 

 

 

 

 

Date : Nov. 09, 2017 Rev : 3.0 FCC Confidentiality Request Letter HACS-F003 FCC Confidentiality Request Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC Date : Nov. 09, 2017 Rev : 3.0 REVISION TABLE Rev 1.0 2.0 2.1 2.2 3.0 Description of Change Original Release(Obsolete) Updated template(Obsolete) Updated address(Obsolete) Updated address Updated LTC and STC Confidentiality table Date 06/14/2012 10/01/2012 01/10/2014 11/18/2016 11/09/2017 Approved QM QM QM QM QM HACS-F003 FCC Confidentiality Request Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC HYUNDAI MOBIS CO., Ltd DATE : Feb 27, 2020 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT : Request for Confidentiality for FCC ID : TQ8-ACB10HSGG We hereby request confidential treatment of the information accompanying this application as outlined below:

LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description LONG-TERM CONFIDENTIAL SHORT-TERM CONFIDENTIAL

(180 DAYS) 1 2 3 4 5 6 7 8 Block Diagram Operational Description Schematics Part List External Photos Internal Photos Test-Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signed by:

Seung Hoon Choe / Representative HYUNDAI MOBIS CO., LTD 203, Teheran-ro Gangnam-gu, Seoul, South Korea HACS-F003 FCC Confidentiality Request Letter Rev : 3.0