FCC ID: TQ8-AC110D3GN DIGITAL CAR AUDIO SYSTEM

 

LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 2 Features of your vehicle How vehicle audio works FM reception JBM001 AM and FM radio signals are broad-

cast from transmitter towers located around your city. They are intercept-

ed by the radio antenna on your vehi-

cle. This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached your vehicle, the precise engineering of your audio system ensures the best possible quality reproduction. However, in some cases the signal coming to your vehi-

cle may not be strong and clear. 24 This can be due to factors, such as the distance from the radio station, closeness of other strong radio sta-

tions or the presence of buildings, bridges or other large obstructions in the area. AM (MW, LW) reception JBM002 AM broadcasts can be received at greater distances than FM broad-

casts. This is because AM radio waves are transmitted at low fre-

quencies. These long, low frequency radio waves can follow the curvature of the earth rather than travelling straight out into the atmosphere. In addition, they curve around obstruc-

tions so that they can provide better signal coverage. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 3 FM radio station Features of your vehicle JBM003 FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are eas-

ily affected by buildings, mountains, or other obstructions. These can result in certain listening conditions which might lead you to believe a problem exists with your radio. The following conditions are normal and do not indicate radio trouble:

JBM004 Fading - As your vehicle moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you select another stronger station.

Flutter/Static - Weak FM signals or large obstructions between the transmitter and your radio can dis-

turb the signal causing static or fluttering noises to occur. Reducing the treble level may lessen this effect until the disturbance clears. JBM005

Station Swapping - As a FM signal weakens, another more powerful signal near the same frequency may begin to play. This is because your radio is designed to lock onto the clearest signal. If this occurs, select another station with a stronger signal.

Multi-Path Cancellation - Radio signals being received from sever-

al directions can cause distortion or fluttering. This can be caused by a direct and reflected signal from the same station, or by signals from two stations with close fre-

quencies. If this occurs, select another station until the condition has passed. 4 3 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 4 Features of your vehicle Using a cellular phone or a two-

way radio When a cellular phone is used inside the vehicle, noise may be produced from the audio system. This does not mean that something is wrong with the audio equipment. In such a case, use the cellular phone at a place as far as possible from the audio equip-

ment. CAUTION When using a communication system such as a cellular phone or a radio set inside the vehicle, a separate external antenna must be fitted.When a cellular phone or a radio set is used with an internal antenna alone, it may interfere with the vehi-

cle's electrical system and adversely affect safe operation of the vehicle. 44 WARNING Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone. Caring for disc

If the temperature inside the car is too high, open the car windows to ventilate before using the system.

It is illegal to copy and use MP3/WMA files without permis-

sion. Use CDs that are created only by lawful means.

Do not apply volatile agents, such as benzene and thinner, normal cleaners and magnetic sprays made for analogue disc onto CDs.

To prevent the disc surface from getting damaged, hold CDs by the edges or the center hole only.

Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge).

Do not damage the disc surface or attach pieces of sticky tape or paper.

Make certain only CDs are insert-

ed into the CD player (Do not insert more than one CD at a time).

Keep CDs in their cases after use to protect them from scratches or dirt. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 5 Features of your vehicle NOTICE Order of playing files (folders) :

to 1. Song playing order :

sequentially. 2. Folder playing order :

If no song file is contained in the folder, that folder is not displayed.

Depending on the type of CD-

R/CD-RW CDs, certain CDs may not operate normally according to manufacturing companies or mak-

ing and recording methods. In such circumstances, continued use may cause malfunctions to your audio system. NOTICE - Playing an Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with international audio CD standards (Red Book), may not play on your car audio. Please note that inabilities to properly play a copy protected CD may indicate that the CD is defective, not the CD player. 4 5 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 6 Features of your vehicle WARNING Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents.

Do not disassemble, assem-

ble, or modify the audio sys-

tem. Such acts could result in accidents, fire, or electric shock.

Using the phone while driving may lead to a lack of attention traffic conditions and of increase the likelihood of accidents. Use the phone fea-

ture after parking the vehicle.

Heed caution not to spill water or introduce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.

(Continued)

(Continued)

Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product malfunc-

tion. Continued use in such conditions could lead to acci-

dents(fires, electric shock) or product malfunctions.

Do not touch the antenna dur-

ing thunder or lightening as such acts may lead to light-

ning induced electric shock.

Do not stop or park in park-

ing-restricted areas to operate the product. Such acts could lead to traffic accidents. ignition

Use the system with the vehi-

cle turned on. Prolonged use with the igni-

tion turned off could result in battery discharge.

(Continued) 64

(Continued)

Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal injury, and death. The drivers primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle sys-

tems which take the drivers eyes, attention and focus away from the safe operation of a vehi-

cle or which are not permissible by law should never be used during operation of the vehicle. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 7 CAUTION

Operating the device while driving could lead to acci-

dents due to a lack of atten-

tion to external surroundings. First park the vehicle before operating the device.

Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to acci-

dents.

Pay attention to the volume setting when turning the device on.A sudden output of extreme volume upon turning the device on could lead to hearing impairment. (Adjust the volume to a suitable levels before turning off the device.)

(Continued)

(Continued)

Turn on the car ignition before using this device.Do not oper-

ate the audio system for long periods of time with the ignition turned off as such operations may lead to battery discharge.

Do not subject the device to severe shock or impact.Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen.

When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materials, chemical cloths, or solvents (alcohol, benzene, thinners, etc.) as such materials may damage the device panel or cause color/quality deterioration

(Continued) Features of your vehicle

(Continued)

Do not place beverages close to the audio system. Spilling beverages may lead to system malfunction.

In case of product malfunc-

tion,please contact your place of purchase or After Service center.

Placing the audio system with-

in an electromagnetic environ-

ment may result in noise inter-

ference.

Prevent caustic solutions such as perfume and cosmet-

ic oil from contacting the dashboard because they may cause damage or discol-

oration. 4 7 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 8 Features of your vehicle

(Continued) Depending on the condition of the external USB device, the connect-

ed external USB device can be unrecognizable. When the formatted byte/sector setting of External USB device is not or 2048BYTE, then the device will not be recognized. 512BYTE Use only a USB device formatted either to FAT 12/16/32. USB devices without USB I/F authentication may not be recog-

nizable. Make sure the USB connection terminal does not come in contact with the human body or other objects. If you repeatedly connect or dis-

connect the USB device in a short period of time, it may break the device. You may hear a strange noise when connecting or disconnecting a USB device.

(Continued)

(Continued) If you disconnect the external USB device during playback in USB mode, the external USB device can be damaged or may malfunction. Therefore, disconnect the external USB device when the audio is turned off or in another mode.

(e.g, Radio, CD) Depending on the type and capac-

ity of the external USB device or the type of the files stored in the device, there is a difference in the time taken for recognition of the device. Do not use the USB device for pur-

poses other than playing music files. Playing videos through the USB is not supported. Use of USB accessories such as rechargers or heaters using USB I/F may lower performance or cause trouble.

(Continued) NOTICE - USING THE USB DEVICE To use an external USB device, make sure the device is not con-

nected when starting up the vehi-

cle. Connect the device after start-

ing up. If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.) If the engine is started up or turned off while the external USB device is connected, the external USB device may not work. The System may not play inau-

thentic MP3 or WMA files. 1) It can only play MP3 files with the compression rate between 8Kbps ~ 320Kbps. 2) It can only play WMA music files with the compression rate between 8Kbps ~ 320Kbps. Take precautions for static elec-

tricity when connecting or discon-

necting the external USB device. An encrypted MP3 PLAYER is not recognizable.

(Continued) 84 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 9 Features of your vehicle

(Continued) If you use devices such as a USB hub purchased separately, the vehicles audio system may not recognize the USB device. In that case, connect the USB device directly to the multimedia termi-

nal of the vehicle. If the USB device is divided by log-

ical drives, only the music files on the highest-priority drive are rec-

ognized by car audio. Devices such as MP3 Player/

Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable. Charging through the USB may not be supported in some mobile devices. USB HDD or USB types liable to connection failures due to vehicle vibrations are not supported. (i-

stick type) Some non-standard USB devices

(METAL COVER TYPE USB) can be unrecognizable.

(Continued)

(Continued) Some USB flash memory readers

(such as CF, SD, micro SD, etc.) or external-HDD type devices can be unrecognizable. Music files protected by DRM

(DIGITAL RIGHTS MANAGE-

MENT) are not recognizable. The data in the USB memory may be lost while using this audio. Always back up important data on a personal storage device. Please avoid using USB products memory which can be used as key chains or cellular phone accessories as they could cause damage to the USB jack. Please make certain only to use plug type connector products. 4 9 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 10 Features of your vehicle NOTICE - USING THE iPod DEVICE Some iPod models may not sup-

port communication protocol and files may not properly play. Supported iPod models:

- iPod Mini

- iPod 4th (Photo) ~ 6th (Classic) generation

- iPod Nano 1st~4th generation

- iPod Touch 1st~2nd generation The order of search or playback of songs in the iPod can be different from the order searched in the audio system. If the iPod disabled due to its own malfunction, reset the iPod.

(Reset: Refer to iPod manual) An iPod may not operate nor-

mally on low battery.

(Continued)

(Continued) Some iPod devices, such as the iPhone, can be connected through the Bluetooth Wireless Technology interface. The device must have Bluetooth Wireless audio Technology capability (such as for headphone Bluetooth stereo Wireless Technology ). The device can play, but it will not be con-

trolled by the audio system. To use iPod features within the audio, use the cable provided upon purchasing an iPodd device. Skipping or improper operation may occur depending on the characteris-

tics of your iPod/iPhone device. If your iPhone is connected to both the Bluetooth Wireless Technology and USB, the sound may not be prop-

erly played. In your iPhone, select the Dock connector or Bluetooth Wireless Technology to change the sound output (source).

(Continued)

(Continued) When connecting iPod with the iPod Power Cable, insert the con-

nector to the multimedia socket completely. If not inserted com-

pletely, communications between iPod and audio may be interrupt-

ed. When adjusting the sound effects of the iPod and the audio system, the sound effects of both devices will overlap and might reduce or distort the quality of the sound. Deactivate (turn off) the equalizer function of an iPod when adjust-

ing the audio systems volume, and turn off the equalizer of the audio system when using the equalizer of an iPod. When not using iPod with car audio, detach the iPod cable from iPod. Otherwise, iPod may remain in accessory mode, and may not work properly. 4 10 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 11 Features of your vehicle CD Player : AC100TMGG, AC110TMGG, AC100TMGE, AC110TMGE, AC100TMGN, AC110TMGN, AC100TMGL*, AC110TMGL*

* : for columbia No logo will be shown if the BluetoothWireless Technology feature is not supported. 4 11 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 12 Features of your vehicle SYSTEM CONTROLLERS AND FUNCTIONS Display and settings may differ depending on the selected audio. Audio Head Unit RADIO 2.

Changes to FM/AM mode.

Each time the key is pressed,the mode is changed in order of FM1 FM2 AM. MEDIA 3.

Changes to CD, USB( iPod), AUX, My Music, BT Audio mode.

Each time the key is pressed, the mode is changed in order of CD, USB(iPod), AUX, My Music, BT Audio mode. PHONE

(if equipped) 4.

Operates Phone Screen When a phone is not connected, the connection screen is displayed. 1.

Ejects the disc.

(EJECT) 4 12 SEEK TRACK 5.

Radio Mode : Automatically search-

es for broadcast frequencies.

CD, USB, iPod, My Music modes

- Shortly press the key (under 0.8 seconds): Moves to next or previ-

ous song (file)

- Press and hold the key (over 0.8 seconds): Rewinds or fast-for-

wards the current song. 6. PWR/VOL knob Power Knob: Turns power On/Off by pressing the knob

Volume Knob: Sets volume by turning the knob left/right

LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 13 DISP 8.

Each time the button is shortly pressed (under 0.8 seconds), sets screen Off Screen On Screen Off Audio operation is maintained and only the screen will be turned Off. In the screen Off state, press any key to turn the screen On again. SCAN 9.

Radio Mode

- Shortly press the key : Previews each broadcast for 5 seconds each.

- Press and hold the key (over 0.8 seconds): Previews the broad-

casts saved in Preset

~

for 5 seconds each. 6 1 Press the key again to continue listening to the current frequency. SCAN Features of your vehicle

CD, USB, My Music mode

- Shortly press the key (under 0.8 seconds): Previews each song

(file) for 10 seconds each. Press the key again to continue listening to the current song (file). SCAN SETUP CLOCK 10.

Shortly press the key (under 0.8 seconds) : Moves to the Display, Sound, Clock, Phone, System set-

ting modes

Press and hold the key (over 0.8 seconds) : Move to the Time setting screen MENU 11. Displays menus for the current mode. iPod List : Move to parent category FOLDER 12.

CD MP3, USB mode : Folder Search 4 13 6 1

~

(Preset) 7.

Radio Mode: Saves frequencies

(channels) or receives saved fre-

quencies (channels) 1 2 RPT

: Repeat

: Random

CD, USB, iPod, My Music mode

-

-

In the Radio, Media, Setup, and Menu pop up screen, the number menu is selected. RDM LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 14 Features of your vehicle TUNE knob 13.

Radio mode : Changes frequency by turning the knob left/right

CD, USB, iPod, My Music mode:

Searches songs (files) by turning the knob left/right When the desired song is dis-

played, press the knob to play the song.

Moves focus in all selection menus and selects menus FM 14.

Changes to FM mode.

Each time the key is pressed, the mode changed in order of FM1 FM2. AM 15.

Changes to AM mode. 4 14 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 15 SETUP

- AC100TMGG, AC110TMGG, AC100TMGE, AC110TMGE, AC100TMGN, AC110TMGN, AC100TMGL*, AC110TMGL*

* : for columbia Display Settings Press

[Display] through the SETUP CLOCK 1 RPT key Select menu key Select TUNE knob or through TUNE knob Features of your vehicle On

. Mode Pop up

[Mode Pop up] Changes selection mode

During On state, press the RADIO key to display the mode MEDIA or change pop up screen.

When the pop up screen is dis-

TUNE knob or to select the played, use the

~

keys desired mode. 1 6 Text Scroll

[Text Scroll ] Set

/

: Maintains scroll

: Scrolls only one (1) time. On On Off Off Media Display When playing an MP3 file, select the desired display info from Folder/File or Album/Artist/Song. 4 15 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 16 Sound Settings This menu allows you to set the Bass, Middle, Treble and the Sound Fader and Balance. Select menu through

[Sound Settings] Select TUNE knob Turn TUNE knob left/right to set Speed Dependent Volume Control This feature is used to automatically control the volume level according to the speed of the vehicle. Select [Speed Dependent Vol.] Set in 4 levels [Off/Low/Mid/High] of TUNE knob

Bass, Middle, Treble : Selects the sound tone.

Fader, Balance : Moves the sound fader and balance.

Default : Restores default settings. Return : While adjusting values, TUNE knob will re-pressing the restore the parent menu. Features of your vehicle Sound Settings SETUP CLOCK the Press

[Sound] through key Select TUNE knob or key Select menu through 2 RDM TUNE knob 4 16 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 17 Features of your vehicle Clock Settings Press

[Clock] through the SETUP CLOCK key Select menu 3 TUNE knob key Select TUNE knob or through Clock Settings This menu is used to set the time. Select [Clock Settings] Set through TUNE knob Press TUNE knob Calendar Settings This menu is used to set the date. Select through

[Calendar Settings] Set TUNE knob Press TUNE knob Adjust the number currently in focus to set the [hour] and press the tune knob to set the [minute]. Adjust the number currently in focus to make the settings and press the tune knob to move to the next setting.

(Set in order of Year/Month/Day) Clock Display when Power is OFF Select [Clock Disp.(Pwr Off) Set

/

TUNE knob

: Displays time/date on screen

: Turn off. through On On Off Off

4 17 Pairing completion is displayed. In some mobile phones, pairing will automatically be followed by connection. It is possible to pair up to five Bluetooth Wireless Technology enabled mobile phones. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 18 Features of your vehicle Phone Setup (if eqipped) Pair Phone Press the SETUP CLOCK key Select [Phone]

CAUTION To pair a Bluetooth Wireless Technology enabled mobile phone, authentication and con-

nection processes are first required. As a result, you can-

not pair your mobile phone while driving the vehicle. First park your vehicle before use. Select [Pair Phone] Set through TUNE knob Search for device names as dis-

played on your mobile phone and connect. Input the passkey displayed on the screen. (Passkey : 0000) The device name and passkey will be displayed on the screen for up to 3 minutes. If pairing is not com-

pleted within the 3 minutes, the mobile phone pairing process will automatically be canceled. 4 18 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 19 Phone List The names of up to 5 paired phones will be displayed.

Connecting a phone Select [Phone List] Select mobile phone through Select [Connect Phone]

TUNE knob

Disconnecting a connected phone Select [Phone List] Select mobile phone through Select [Disconnect Phone]

TUNE knob Features of your vehicle

] is displayed in front of the cur-

A [

rently connected phone. Select the desired name to setup the selected phone. Select a mobile phone that is not currently connected. Select the currently connected mobile phone. Connect phone. the selected mobile Connection completion is dis-

played. If a phone is already connected, disconnect the currently connect-

ed phone and select a new phone to connect. Disconnect the selected mobile phone. Disconnection completion is dis-

played. 4 19 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 20 Features of your vehicle

Changing connection sequence

(Priority) This is used to change the order (pri-

ority) of automatic connection for the paired mobile phones. Select [Phone List] Select [Priority]

through TUNE knob Select No. 1 Priority mobile phone Select [Priority]. From the paired phones, select the phone desired for No.1 priority. The changed priority sequence is displayed. Once the connection sequence

(priority) is changed, the new no. 1 priority mobile phone will be con-

nected.

- when the no. 1 priority cannot be connected: Automatically attempts to connect the most recently con-

nected phone.

- Cases when the most recently connected phone cannot be con-

nected: Attempts to connect in the order in which paired phones are listed. 4 20

- The connected phone will auto-

matically be changed to No. 1 pri-

ority. TUNE knob

Delete Select [Phone List] Select mobile phone through Select [Delete]

Select the desired mobile phone. Delete the selected mobile phone. Deletion completion is displayed. When attempting to delete a cur-

the rently connected phone, phone is first disconnected. CAUTION

When you delete a mobile phone,the mobile phone con-

tacts will also be erased.

For stable Bluetooth Wireless Technology communication, delete the mobile phone from the audio and also delete the audio from your mobile phone. Contacts Download This feature is used to download contacts and call histories into the audio system. Select [Contacts Download] Select through TUNE knob CAUTION

The download feature may not be supported in some mobile phones.

If a different operation is per-

formed while Contacts are being downloaded,download-

ing will be discontinued. Contacts already downloaded will be saved.

When downloading new Contacts,delete all previously saved Contacts before start-

ing download. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 21 Features of your vehicle Auto Download When connecting a mobile phone, it is possible to automatically download new Contacts and Call Histories. Select [Auto Download] Set On TUNE knob through Off

/

(files) saved Audio Streaming Songs your Bluetooth Wireless Technology enabled mobile phone can be played through the audio system. Select [Audio Streaming] Set in On

/

Off through TUNE knob CAUTION The Bluetooth Wireless Technology audio streaming feature may not be supported in some mobile phones. Outgoing Volume This is used to set the volume of your voice as heard by the other party while on a Bluetooth Wireless Technology enabled handsfree call. Select [Outgoing Volume] Set vol-

ume through While on a call, the volume can be TUNE knob changed by using the key. SEEK TRACK 4 21 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 22 Features of your vehicle BluetoothWireless Technology System Off This feature is used when you do not wish to use the Bluetooth Wireless Technology system. Select [Bluetooth System Off] Set through If a phone is already connected, disconnect the currently connect-

ed phone and turn the Bluetooth Wireless Technology system off. TUNE knob Using the BluetoothWireless Technology System use Bluetooth Wireless To Technology when the system is cur-

rently off, follow these next steps.

Turning On Bluetooth Wireless Key Technology through the PHONE PHONE key Screen Press the Guidance Moves to the screen where Bluetooth Wireless Technology functions can be used and dis-

plays guidance. 4 22

Turning On Bluetooth Wireless SETUP CLOCK Technology through the Key SETUP CLOCK Press the key Select [Phone]

A screen asking whether to turn on BluetoothWireless Technology will be displayed. On the screen, select to turn on BluetoothWireless Technology and display guidance. YES If the Bluetooth Wireless Technology system is turned on, the system will automatically try to con-

nect the most recently connected Bluetooth Wireless Technology mobile phone. CAUTION Bluetooth Wireless Technology connection may become inter-

mittently disconnected in some mobile phones. Follow these next steps to try again. 1) Turn the Bluetooth Wireless Technology function within the mobile phone ON/OFF and try to connect again. 2) Turn the mobile phone power ON/OFF and try to connect again. 3) Completely remove the mobile phone battery,reboot,and then try to connect again. 4) Reboot the audio system and try to connect again 5) Delete all paired devices in your mobile phone and the audio system and pair again for use. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 23 Features of your vehicle System Settings Press the SETUP CLOCK key Select [System]

Memory Information

(if equipped) Displays currently used memory and total system memory. Select [Memory Information] OK The currently used memory is dis-

played on the left side while the total system memory is displayed on the right side. Language This menu is used to set the display and voice recognition language. Select

[Language] Set through TUNE knob The system will reboot after the language is changed. Language support by region

- English, 4 23 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 24 Preset SEEK Press the 1

Shortly pressing the key (under 0.8 seconds): Plays the frequency saved in the corresponding key. key

~

6

Pressing and holding the key (over 0.8 seconds): Pressing and holding the desired key from will save the currently playing broadcast to the selected key and sound a BEEP.

~

1 6 Features of your vehicle RADIO Changing RADIO mode Changing RADIO mode key SEEK TRACK SEEK Press the

Shortly pressing the key (under 0.8 seconds): Changes the frequency.

Pressing and holding the key (over 0.8 seconds): Automatically search-

es for the next frequency. 4 24 key SCAN SCAN Press the

Shortly pressing the key (under 0.8 seconds): The broadcast frequen-

cy increases and previews each broadcast for 5 seconds each. After scanning all frequencies, returns and plays the current broadcast frequency.

Pressing and holding the key (over 0.8 seconds): Previews the broad-

casts saved in Preset for 5 seconds each.

~

6 1 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:56 AM Page 25 Features of your vehicle Selecting through manual search Turn the adjust the frequency.

AC100TMGE, AC110TMGE TUNE knob left/right to

- FM : Changes by 50KHz

- AM : Changes by 9khz

AC100TMGG, AC110TMGG

- FM : Changes by 100KHz

- AM : Changes by 9khz

AC100TMGL, AC110TMGL

- FM : Changes by 100KHz

- AM : Changes by 10khz

AC100TMGN, AC110TMGN

- FM : Changes by 200KHz

- AM : Changes by 10khz MENU Within

(Auto Store) and Info functions. MENU key are the A.Store A.Store (Auto Store) Press A.Store] through MENU the 1 RPT key. key Set TUNE knob or

[

Select A.Store(Auto Store) to save frequencies with superior reception

. If no fre-

to presets quencies are received, then the most recently received frequency will be broadcast.

~

1 6 4 25 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 26 Features of your vehicle BASIC METHOD OF USE :

Audio CD / MP3 CD / USB /

iPod / My Music MEDIA Press the key to change the mod mode in order of CD USB(iPod) AUX My Music BT Audio. The folder/file name is displayed on the screen.

<USB>

<My Music>

<Audio CD>

The CD is automatically played when a CD is inserted. The USB music is automatically played when a USB is connected.

<CD MP3>

4 26 1 Repeat While song (file) is playing

(RPT) key Audio CD, MP3 CD, USB, iPod, My Music mode: RPT on screen

To repeat one song (Shortly press-

ing the key (under 0.8 seconds)):

Repeats the current song. RPT MP3 CD, USB mode: FLD.RPT on screen

To repeat folder (pressing twice):

repeats all files within the current folder. Press the off repeat. 1 RPT key again to turn LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 27 Features of your vehicle Random While song (file) is playing

(RDM) key Audio CD, My Music mode: RDM on screen

Random (Shortly pressing the key ):

RDM 2 Plays all songs in random order. MP3 CD, USB mode: FLD.RDM on screen

Folder Random (Shortly pressing the key): Plays all files within the current folder in random order. MP3 CD, USB mode: RDM on screen

Random (pressing twice): Plays all files in random order. iPod mode: RDM on screen

Random (press the key) : Plays all files in random order. Press the off random. 2 RDM key again to turn Changing Song/File While song (file) is playing key

Shortly pressing the key: Plays the SEEK TRACK current song from the beginning. SEEK TRACK If the key is pressed again within 1 second, the previ-

ous song is played. Scan While song (file) is playing key

Shortly pressing the key (under 0.8 seconds) : Scans all songs from the next song for 10 seconds each. key again to turn Press the SCAN SCAN off.

Pressing and holding the key (over 0.8 seconds): Rewinds the song. SEEK TRACK While song (file) is playing key

Shortly pressing the key: Plays the next song.

Pressing and holding the key (over 0.8 seconds): Fast forwards the song. The SCAN function is not support-

ed in iPod mode. 4 27 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 28 Features of your vehicle MENU : Audio CD Press the CD MP3 mode to set Information features. key the Repeat, Random, MENU Information features. MENU key Set [

TUNE knob or Information Press the through the key to display information of the cur-

rent song. Press the info display. key to turn off Info]

3 MENU MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn off. key Set [ RPT]

1 RPT MENU key Set [ RDM]

Random Press the through the key to randomly play songs within the current folder. Press RDM again to turn off. TUNE knob or RDM 2 Folder Search : MP3 CD, USB Mode While

(Folder Up) key is playing FOLDER file

Searches the next folder. While is playing

(Folder Down) key file FOLDER

Searches the parent folder. If a folder is selected by pressing the TUNE knob, the first file within the selected folder will be played. Searching Songs (File)

Turning TUNE knob : Searches for songs (files)

Pressing TUNE knob : Plays selected song (file). 4 28 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 29 Features of your vehicle MENU : MP3 CD / USB Press the CD MP3 mode key to set the Repeat, Folder Random, Folder Repeat, All Random, Information, and Copy features. MENU Information, and Copy features. MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn off. key Set [ RPT]

1 RPT Folder Random Press F.RDM] through the TUNE knob or key to randomly play songs key Set MENU the

[

2 RDM within the current folder. Press F.RDM again to turn off. key Set [ F.RPT]

Folder Repeat Press the MENU through the key to repeat songs within the cur-

rent folder. Press F.RPT again to turn off. TUNE knob or 3 MENU All Random Press the A.RDM] through the or songs within the CD. Press A.RDM again to turn off. TUNE knob key to randomly play all key Set 4

[

MENU key Set [

TUNE knob or Information Press the through the key to display information of the cur-

rent song. Press the info display. key to turn off Info]

5 MENU Copy Press the through the key. MENU key Set [ Copy]

TUNE knob or 6 This is used to copy the current song into My Music. You can play the copied Music in My Music mode. If another key is pressed while copying is in progress, a pop up asking you whether to cancel copying is displayed. If another media is connected or inserted (USB, CD, iPod, AUX) while copying is in progress, copy-

ing is canceled. Music will not be played while copying is in progress. 4 29 the MENU Search Press Search] through the or Displays iPod category list. Searching iPod category is key. 4 key Set

[

TUNE knob MENU key pressed, move to parent cate-

gory. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 30 Features of your vehicle MENU : iPod In iPod mode, press the key to set the Repeat, Random, Information and Search features. MENU MENU Repeat Press the through the TUNE knob or key to repeat the current song. Press RPT again to turn repeat key Set [ RPT]

RPT 1 off. MENU key Set [ RDM]

Random Press the through the key. Plays all songs within the currently playing category in random order. Press RDM again to turn off. TUNE knob or RDM 2 MENU key Set [

TUNE knob or Information Press the through the key. Displays information of the current song. Press the info display. key to turn off Info]

3 MENU 4 30 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 31 Features of your vehicle MENU : My Music Mode

(if equipped) In My Music mode, press the MENU key to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection features. MENU key Set [ RPT]

Repeat Press the through the key. Repeats the currently playing song. Press RPT again to turn repeat off. TUNE knob or RPT 1 MENU key Set [ RDM]

Random Press the through the key. Plays all songs in random order. Press RDM again to turn random TUNE knob or RDM 2 off. MENU key Set [

TUNE knob or Information Press the through the key. Displays information of the current song. Press the info display. key to turn off Info]

3 MENU MENU TUNE knob or key Set [ Delete]

Delete Press the through the key. Deletes currently playing file In the play screen, pressing delete will delete the currently playing song. Deletes file from list 4 Select the file you wish to delete by using the TUNE knob. MENU Press the key and select the delete menu to delete the selected file. 4 31 NOTICE - Using the My Music Even if memory is available, a maximum of 6,000 songs can be stored. The same song can be copied up to 1,000 times. Memory info can be checked in the System menu of Setup. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 32 Features of your vehicle MENU Delete All Press the through the key. Deletes all songs of My Music. TUNE knob or key Set [ Del.All]

5 the MENU key Set Delete Selection Press Del.Sel] through the or Songs within My Music are selected and deleted. Select the songs you wish to TUNE knob key. 6

[

delete from the list. After selecting, press the MENU key and select the delete menu. 4 32 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 33 Features of your vehicle AUX AUX is used to play external MEDIA currently connected with the AUX terminal. AUX mode will automatically start when an external device is connect-

ed with the AUX terminal. If an external device is connected, you can also press the key to change to AUX mode. MEDIA AUX mode cannot be started unless there is an external device connected to the AUX terminal. NOTICE - USING THE AUX Fully insert the AUX cable into the AUX terminal for use. 4 33 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 34 Features of your vehicle BluetoothWireless Technology AUDIO

(if equipped) What is BluetoothWireless Technology?

Bluetooth Wireless Technology allows devices to be connected in a short distance, including hands-free devices, stereo headsets, wireless remote controllers, etc. For more information, visit the Bluetooth Wireless Technology website at www.Bluetooth.com Before using Bluetooth Wireless Technology audio features

Bluetooth Wireless Technology audio may not be supported depending on the compatibility of your BluetoothWireless Technology mobile phone.

In order to use BluetoothWireless Technology audio, you must first pair and connect the Bluetooth Wireless Technology mobile phone. 4 34

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Other trademarks and trade names are those of their respective owners. A Bluetooth enabled cell phone is required to use Bluetooth Wireless Technology

Bluetooth Wireless Technology audio can be used only when the

[Audio Streaming] of Phone is turned On. Setting Bluetooth Wireless Technology Audio Streaming :

Press the key Select

[Phone] through the tune knob Select [Audio Streaming] through the TUNE knob Set SETUP CLOCK On Off

/

MEDIA Starting BluetoothWireless Technology Audio

Press the key to change the mode in order of CD USB AUX My Music BT Audio.

If BT Audio is selected, Bluetooth Wireless Technology audio will start playing. Audio may not automatically start playing in some mobile phones. Using the Bluetooth Wireless Technology audio features

Play / Pause Press the pause the current song. TUNE knob to play and The previous song / next song /

play / pause functions may not be supported in some mobile phones. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 35 PHONE (if equipped) Making a call using the Steering wheel remote controller Before using the Bluetooth Wireless Technology phone features

In order to use Bluetooth Wireless Technology phone, you must first pair and connect the Bluetooth Wireless Technology mobile phone.

If the mobile phone is not paired or connected, it is not possible to enter Phone mode. Once a phone is paired or connected, the guid-

ance screen will be displayed.

If Priority is set upon vehicle igni-

tion (IGN/ACC ON), the Bluetooth Wireless Technology phone will be automatically connected. Even if you are outside, the Bluetooth Wireless Technology phone will be automatically connected once you are in the vicinity of the vehicle. If you do not want automatic Bluetooth Wireless Technology phone connec-

tion, set the Bluetooth Wireless Technology power to OFF. 1. VOLUME button : Raises or lowers speaker volume. 2.MUTE button : Mute the micro-

phone during a call. 3. 4. button : Places and transfers calls. button : Ends calls or cancels functions. Features of your vehicle

Check call history and making call Shortly press (under 0.8 seconds) key on the steering the remote controller. The call history list will be dis-

played on the screen. Press the key again to con-

nect a call to the selected number.

Redialing the most recently called number Press and hold (over 0.8 seconds) key on the steering the remote controller. The most recently called number is redialed. 4 35 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 36 the PHONE key Set Contacts Press Contacts] through the or The Contacts are displayed and can be used to select a number and make a call. TUNE knob key. RDM

[

2 If more than one number is saved to one contact, then a screen showing the mobile phone num-

ber, Home and office number is displayed. Select the desired num-

ber to make the call. Features of your vehicle Phone MENU key to display three Press the PHONE menus

(Call History, Contacts, Phone Setup). 1

[

RPT key. key Set TUNE knob Call history Press the PHONE History] through the or The call history is displayed and can be used to select a number and make a call. If call history does not exist, a screen asking whether to download call his-

tory is displayed. (The download fea-

ture may not be supported in some mobile phones) 4 36 If Contacts do not exist, a screen asking whether to download Contacts is displayed. (The down-

load feature may not be supported in some mobile phones) Phone Setup Press PHONE Setup] through the the 3 key. key Set TUNE knob or

[

The Bluetooth Wireless Technology mobile phone setup screen is dis-

played. For more information, refer to Phone Setup. LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 37 Features of your vehicle NOTICE - USING THE BluetoothWireless Technology CELLULAR PHONE Do not use a cellular phone or per-

form Wireless Technology settings (e.g. pairing a phone) while driving. Bluetooth Some Bluetooth Wireless Technology -enabled phones may not be recognized by the system or fully compatible with the system. Before using Bluetooth Wireless Technology related features of the audio system, refer your phones Users Manual for phone-side Bluetooth Wireless Technology operations. The phone must be paired to the audio system to use Bluetooth Wireless Technology related fea-

tures. You will not be able to use the hands-free feature when your phone (in the car) is outside of the cellular service area (e.g. in a tun-

nel, in a underground, in a moun-

tainous area, etc.).

(Continued)

(Continued) If the cellular phone signal is poor or the vehicles interior noise is too loud, it may be difficult to hear the other persons voice during a call. Do not place the phone near or inside metallic objects, otherwise communications with Bluetooth Wireless Technology system or cel-

lular service stations can be dis-

turbed. While a phone is connected through Bluetooth Wireless Technology your phone may dis-

charge quicker than usual for additional Bluetooth Wireless Technology-related operations. Some cellular phones or other devices may cause interference noise or malfunction to audio sys-

tem. In this case, store the device in a different location may resolve the condition. Phone contact names should be saved in English or they may not be displayed correctly.

(Continued) ON),

(Continued) If Priority is set upon vehicle igni-

tion(IGN/ACC the Bluetooth Wireless Technology phone will be automatically con-

nected. Even if you are outside, the Bluetooth Wireless Technology phone will be automatically con-

nected once you are in the vicinity of the vehicle. If you do not want automatic Bluetooth Wireless Technology connection, turn the Bluetooth Wireless Technology feature off. The hands-free call volume and quality may differ depending on the mobile phone type. Bluetooth Wireless Technology features can be used only when the mobile phone has been paired and connected with the device. For more information on pairing and connecting Bluetooth Wireless Technology enabled mobile phones, refer to the Phone Setup section.

(Continued) 4 37 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 38 Features of your vehicle

(Continued) In some mobile phones, starting the ignition while talking through Bluetooth Wireless Technology enabled handsfree call will result in the call becoming disconnected.

(Switch the call back to your mobile phone when starting the ignition.) Some features may not be sup-

some Bluetooth ported Wireless Technology mobile phone and devices. Bluetooth Wireless Technology enabled operation may be unsta-

ble depending on the communica-

tion state. Placing the audio system within an electromagnetic environment may result in noise interference. in

(Continued) When a Bluetooth Wireless Technology mobile phone is con-

) icon will appear at nected, a (

the top of the screen. If a (

) icon is not displayed, this indicates that a Bluetooth Wireless Technology enabled device has not been con-

nected. You must connect the device before use. For more infor-

mation on Bluetooth Wireless Technology mobile phones, refer to the Phone Setup section. connecting a Bluetooth Wireless Technology enabled mobile phone will work only when the Bluetooth Wireless Technology option within your mobile phone has been turned on.

(Methods of the Bluetooth Wireless Technology enabled feature may differ depending on the mobile phone.)

(Continued) turning on Pairing and 4 38 LM FL EG GEN3.0 AUDIO_A_NBD009.qxp 6/11/2013 7:57 AM Page 39 APPENDIX Name AST (A.store) SDVC Description Automatically selects and saves channels Speed Dependent Volume Control Features of your vehicle 4 39

 

 

 

 

 

 

 

 

 

 

PARTNO.: 96176-D3150 MODEL: AC110D3GN qr Da ES RP 2 4 2 16 FREQUENCY RANGE SI3H9@0002 AM 530-1710 KHz FM = 87.5- 107.9 MHz FCC ID : TQ8-AC110D3GN MADEINICOREN This device complies with part 15 of the FCC Rules. Operation is Subject to the following two conditions :

(1) this device may not cause harmful interference, and

(2) the device must accept any interference received, including interference that may cause undesired operation THIS PRODUCT COMPLIES WITH DHHS RULE 21 CFR SUBCHAPTER J IN EFFECT OF DATE OF MANUFACTURE SEPTEMBER. 2614 MANUFACTURED BY HYUNDAI MOBIS 4 Fa 2) Fi

 

 

Hyundai Mobis Co., Ltd. 203, Teheran-ro, Gangnam-gu, Seoul, Korea (135-977) Tel. 82-31-260-0098 / Fax. 82-31-899-1788 Date: Nov. 11 , 2014 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Hyundai Mobis Co., Ltd., hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project :

- Product : DIGITAL CAR AUDIO SYSTEM

- Model name : AC110D3GN

- FCC ID : TQ8- AC110D3GN We affirm that between SIEMIC and Hyundai Mobis Co., Ltd., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This authorization is valid until further written notice from the applicant. Sincerely Yours, ______________________________________ Seung-Hoon Choe

/Manager

/Hyundai Mobis Co., Ltd.

 

 

Hyundai Mobis Co., Ltd. 203, Teheran-ro, Gangnam-gu, Seoul, Korea (135-977) Tel. 82-31-260-0098 / Fax. 82-31-899-1788 FCC Confidentiality Request Letter Date: Nov. 11, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 Subject: Permanent Confidentiality Request for FCC ID: TQ8-AC110D3GN We hereby request confidential treatment of information accompanying this application as outlined below:

Block diagram Schematics Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely Yours, ______________________________________ Seung-Hoon Choe

/Manager

/Hyundai Mobis Co., Ltd.

 

 

Hyundai Mobis Co., Ltd. 203, Teheran-ro, Gangnam-gu, Seoul,135-977, Korea Doc No. RF1410-128 Date : Nov. 11, 2014 Subject: Letter of Similarity Dear Sirs, The specification of basic model name is as below :

Basic model name AC110D3GN Specification : Car audio with Bluetooth (BDR/EDR) Description

For USA/General market, we use common marking on front panel Button by character(power, volume, phone, setup, display) Comparing to basic model name, the difference of variant model names are as below :

Description Remarks Variant model name for EU market All model names are electrically identical AC110D3EG Variant model name for Iranian market Variant model name for some Middle East market in construction, Variant model name for some Eastern EU market radio, AC110D3GG Variant model name for General market AC110D7GN Variant mode name for most Latin American market characteristics and features Variant model name AC111D3EE AC110D3EE AC110D3GL AC110D3GE Sincerely yours, __________________________________ Seung-Hoon Choe

/Manager

/Hyundai MOBIS Co., Ltd.

 

 

 

 

 

 

Nov17, 2014 To: FCC From: SIEMIC, INC. RE:, Request for supersede of Label exhibits Applicant: Hyundai Mobis Co., Ltd , FCC ID: TQ8-AC110D3GN Per test labs request, there is a typo on product label. Existing label shown FCC IC : TQ8-AC110D3GN The correct label exhibit should be FCC ID : TQ8-AC110D3GN Thank you, Annie Jiang SIEMIC, INC. 775 Montague Expressway Milpitas , CA 95035 Tel: 408-526-1188 Ext 209 Fax: 408-526-1088 Tel: +1(408) 526 1188, Fax: +1(408) 526 1088, Email: info@siemic.com, URL: www.siemic.com 2206 Ringwood Avenue, San Jose, CA 95131, USA