FCC ID: TQ8-AC230C6AN DIGITAL CAR AUDIO SYSTEM

 

2TEND08 UVO SYSTEM USER'S MANUAL Preface Congratulations on the Purchase of your new UVO system!

Your new UVO system allows you to enjoy various audio and multimedia features through the main audio system. For the latest information about this product or other KIA products and accessories, visit http://

www.kia.com Please read this manual to get the full benefit of the system. These operating instructions are designed to ensure that you can operate the UVO system in a safe and convenient way. We recommend that this manual be kept in the car so that it will be easier for you to find information in case of an emergency. If you cannot find the information you need in this manual or in the Troubleshooting section, your local authorized retailer will be pleased to help you with the system or operations. Kia Motors recommends the use of only parts and accessories that have been tested and approved by Kia Motors in terms of function, safety and suitability. Copyright(c) 2011 Kia Motors America, Inc. All Rights Reserved. Warning: The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. iPod iPod is a registered trademark of Apple, Inc. Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. A Bluetooth enabled cell phone is required to use Bluetooth wireless technology. HD RadioTM Technology HD Radio TM Technology manufactured under license from iBiquity Digital Corp. U.S. and Foreign Patents. HD RadioTM and the HD and HD Radio logos are proprietary trademarks of iBiquity. Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries. zune zune is a registered trademark of Microsoft Corporation in the United States and or other countries. Table of contents WARNING & SAFETY INFORMATION Safety Symbols 8 FCC Information 8 Warning 9 Caution 9 PART 1 GETTING STARTED PART 2 AUDIO FEATURES Controls and Features FM/AM MODE Control Panel 1-2 Steering Wheel 1-4 Basic Features System Power 1-6 1. Turning System Power On 1-6 2. Turning System Power Off 1-6 Select Display Language 1-7 Resetting and Initializing UVO system 1-7 1. Resetting the system 1-7 2. Initializing the system 1-8 Sound and Display Settings Sound Settings 1-9 1. FADER/BALANCE 1-9 2. TONE 1-10 3. Touch Screen Beep 1-10 4. Speed Dependent Volume Control 1-10 Display Settings 1-11 1. Setting Brightness 1-11 Automatic Brightness Control 1-11 Manual Brightness Control 1-11 Turning Display On and Off 1-12 Turn Text Scroll On and Off 1-13 FM/AM Mode Screens and Features 2-2 Listening to the FM/AM radio 2-3 1. Selecting a broadcast frequency 2-3 Selecting through SEEK 2-3 Selecting through manual search 2-4 Selecting through preset 2-4 2. Storing presets 2-4 3. Scanning FM/AM broadcast frequencies 2-5 4. Preset Scan 2-5 5. Listening to HD RadioTM Stations

(Optional) 2-5 6. Viewing FM/AM Station information 2-5 SIRIUSTM MODE SIRIUSTM Mode Screen and Features 2-6 Listening to the SIRIUSTM radio 2-6 1. Selecting a SIRIUSTM channel 2-6 Selecting through SEEK 2-6 Selecting through manual search 2-7 Selecting through preset 2-7 Selecting through channel search 2-7 Selecting through SIRIUSTM category list 2-8 2. Using Skip 2-8 Table of contents 3 Table of contents 3. Storing preset 2-9 4. Viewing SIRIUSTM channel information 2-9 MEDIA MODE Common Features 2-10 Play/Pause 2-10 REW/FF 2-10 Jump 2-11 Using Repeat 2-11 Using Shuffle 2-11 AUDIO CD MODE Cautions upon handling Audio CDs 2-12 AUDIO CD Mode Screen and Features 2-14 Inserting/Ejecting a Disc 2-14 1. Inserting a Disc 2-14 2. Ejecting a Disc 2-14 Listening to an Audio CD 2-15 Selecting a CD track 2-15 1. Selecting through Track Up/Down 2-15 2. Selecting through manual search 2-15 MP3 CD MODE Cautions upon handling MP3 CD 2-16 MP3 CD Mode Screen and Features 2-17 Listening to an MP3 CD 2-17 Selecting an MP3 CD song 2-18 1. Selecting through song Up/Down 2-18 2. Selecting through manual search 2-18 3. Selecting from MP3 list 2-18 4. By Artists, Albums, Genres, Songs Composers 2-18 Explore CD 2-19 Viewing song information 2-19 Copying songs into JUKEBOX 2-19 1. Copying the current song 2-19 2. Copying songs from list 2-20 USB MODE Cautions upon handling USB MP3 2-21 Precautions upon handling USB 2-22 Connecting your USB device 2-23 USB Mode Screen and Features 2-23 Listening to USB music 2-24 Selecting USB music 2-24 1. Selecting through song Up/Down 2-24 2. Selecting through manual search 2-24 3. Selecting from the list 2-25 4. By Folders, Artists, Albums, Genres Songs, Composers 2-25 Explore USB 2-25 Viewing song information 2-26 Copying songs into JUKEBOX 2-26 1. Copying the current song 2-26 2. Copying songs from list 2-27 iPod MODE About iPod 2-28 1. Trademark 2-28 2. Connecting your iPod device 2-28 iPod Mode Screen and Features 2-29 Listening to your iPod 2-29 Selecting iPod music 2-30 1. Selecting through song Up/Down 2-30 2. Selecting through manual search 2-30 3. Selecting from the list 2-30 4. By Artists, Albums, Genres, Songs, Podcasts, Composers, Audiobooks 2-30 Viewing song information 2-31 zune MODE About zune 2-32 1. Trademark 2-32 2. Connecting your zune device 2-32 zune Mode Screen and Features 2-32 Listening to your zune 2-33 Selecting zune music 2-33 1. Selecting through song Up/Down 2-33 4 Table of contents 2. Selecting through manual search 2-33 3. Selecting from the list 2-33 4. By Songs, Genres, Albums, Artists, Playlists 2-34 Viewing song information 2-34 AUX MODE AUX Mode Screen 2-35 Connecting an AUX media device 2-35 Listening to AUX media 2-35 4. By Artists, Albums, Genres, Song, Smart driving practices Composers 2-40 Adding Favorites 2-40 Playing Favorites 2-41 3-3 Pairing your handset device to the handsfree system Memory Management Checking System Information 2-42 Deleting JUKEBOX 2-42 1. Deleting JUKEBOX 2-42 2. Deleting all files 2-43 Pairing a Bluetooth wireless technology enabled device for the first time 3-4 Deleting a paired handset device 3-5 Connecting a handset device 3-6 Setting Priority 3-7 BT AUDIO MODE Pandora MODE Using the phone features BT Mode Screen and Features 2-36 Listening to music from your Bluetooth wireless technology enabled device 2-37 Selecting a song 2-37 REW/FF a song 2-37 JUKEBOX MODE JUKEBOX Mode Screen and Features 2-38 Listening to JUKEBOX 2-39 Selecting a JUKEBOX song 2-39 1. Selecting through song Up/Down 2-39 2. Selecting through manual search 2-39 3. Selecting from the list 2-39 About Pandora 2-44 1. Trademark 2-44 2. Before Starting Pandora 2-44 Pandora Mode Screen and Features 2-45 Listening to your PANDORA 2-45 Selecting PANDORA station 2-46 Bookmark Track or Artist 2-46 PART 3 PHONE FEATURES Using your Bluetooth wireless technology Handsfree system 3-2 Phone Mode Screens and Features 3-8 1. When a mobile phone is connected 3-8 2. When making a call 3-8 3. When receiving an incoming call 3-9 4. When on a call 3-9 Answering an incoming call 3-10 Rejecting an incoming call 3-10 Call waiting 3-10 Placing a call 3-11 1. By dialing a number 3-11 2. By contact list 3-12 3. By recent calls 3-12 Contact list 3-13 1.Downloading contact list Table of contents 5 Table of contents

(from mobile phone) 3-13 Searching your contacts 3-14 1. By name 3-14 2. By number 3-15 Checking missed calls 3-16 Favorites 3-16 1. Placing a call by favorites 3-16 2. Adding favorites 3-17 3. Deleting favorites 3-17 SMS 3-18 1. Downloading SMS messages

(from mobile phone) 3-18 2. Checking an SMS message 3-18 3. Sending an SMS message

(Custom Messages) 3-18 4. Editing Custom Messages 3-18 Switching the call 3-19 1. Switching the call between handsfree and handset device 3-19 2. Transferring the handsfree call to your Handset device 3-19 3. Transferring a call on your Handset device to handsfree 3-19 Phone settings Setting Phone Volume 3-20 Turn Streaming Audio On and Off 3-20 Contacts Sync 3-21 SMS 3-22 Changing passkey 3-22 PART 4 VOICE COMMANDS Conditions for voice command system 4-2 Operating Voice Command Using Voice Command 4-3 Voice Command Help 4-3 Turning Command Feedback On and Off 4-4 Adjusting Voice Command Volume 4-5 Speaker Adaptation Creating a Voice Profile 4-6 Selecting a Previous Voice Profile 4-7 Deleting a Voice Profile 4-8 Voice Command List Command List - General Commands 4-9 Command List - Audio Commands 4-10 1. FM/AM Radio 4-10 4-10 2. SIRIUSTM 3. MEDIA 4-11 4. JUKEBOX 4-12 5. Pandora Radio 4-13 Command List - UVO eServices Commands 4-13 Command List - Phone Commands 4-14 PART 5 UVO eServices The Crash Notification Assist feature may not operate in the following situations 5-2 Using UVO eServices and Cautions 5-3 About UVO eServices 5-4 Before using UVO eServices Installing the UVO eServices App on your Smartphone 5-6 Connecting Bluetooth wireless technology 5-6 Activating UVO eServices 5-7 6 Table of contents Vehicle Diagnostics PART 7 TROUBLESHOOTING GUIDE Conducting Vehicle Diagnostics 5-8 Scheduled Diagnostics 5-9 Conducting Auto Diagnostics 5-9 Parking Minder Sending Parking Location 5-10 Roadside Assist TROUBLESHOOTING GUIDE Before thinking the product has malfunctioned 7-2 Troubleshooting 7-3 Roadside Assist 5-11 PART 8 INDEX eServices Guide eServices Guide 5-12 INDEX Crash Notification Assist 8-2 Crash Notification Assist 5-12 Making a 9-1-1 Call 5-13 UVO eServices Settings UVO eServices Activation 5-14 Crash Notification Assist Setting 5-14 PART 6 Rear Camera Display Rear camera display 6-2 WARNING & SAFETY INFORMATION 7 WARNING & SAFETY INFORMATION WARNING & SAFETY INFORMATION Safety Symbols Warning When encountering this symbol in the manual, you must follow these recommendations to avoid accidents that might cause serious injury or death, irreparable damage to your car, system or connected devices or to avoid accidents with injuries or death. Caution When encountering this symbol in the manual, you must be very careful and follow the recommendations to avoid being injured, damaging your car, system or connected devices. Note Information which you must be aware of or recommendations for your convenience and for optimal operation of your system. FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC notification to users This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference, the user is encouraged to try to correct the interference by consulting with a KIA dealer or an experienced technician for technical assistance. 8 WARNING & SAFETY INFORMATION WARNING & SAFETY INFORMATION Warning Caution Driving while distracted can result in a loss of vehicle control, that may lead to an accident, severe personal injury, and/or death. The drivers primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle systems which take the drivers eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle. Read and understand all instructions before you use the system. If damage is caused by failure to follow instructions, the warranty will not apply. Do not operate the audio system in an unsafe manner while driving. Do not dismantle, assemble, or modify the audio system. Do not look at the screen for long periods of time while driving. To reduce the risk of traffic accidents, do not watch the screen when driving. Set the volume to a level which allows you to be aware of external conditions. Use only the supplied mounting hardware for safe operation. Do not operate the audio system for prolonged periods of time with the vehicle ignition in ACC. Such operations may lead to battery discharge. Do not expose the device to water. Never insert foreign objects into the slots or other openings on the device. Do not cause severe shock to the device. Direct pressure to the front side of the monitor may cause damage to the LCD or touch panel. In case of product malfunction, contact your nearest, or preferred, Kia dealer or service center. When cleaning the touch screen, make sure to turn off the device and use a dry and smooth cloth. Never use abrasive materials, chemical cloths, or solvents, such as alcohol, ammonia, benzene, thinners, etc. Such materials may damage the touch panel or cause color and quality deterioration. WARNING & SAFETY INFORMATION 9 WARNING & SAFETY INFORMATION SiriusXM service requires a subscription, sold separately, after 3-month trial included with vehicle purchase. If you decide to continue your SiriusXM service at the end of your trial subscription, the plan you choose will automatically renew and bill at then-

current rates until you call us at 1-866-635-

2349 to cancel. See our Customer Agreement for complete terms at www. siriusxm.com. Other fees and taxes apply. All fees and programming are subject to change. Sirius satellite service is available only to those at least 18 and older in the 48 contiguous USA, D.C., and PR (with coverage limitations). Our Internet radio service is available throughout our satellite service area and in AK and HI. Certain channels are not available on our Internet radio service or on mobile devices. SiriusXM Traffic available in select markets. See siriusxm.com/traffic for more information. 2013 Sirius XM Radio Inc. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. 10 WARNING & SAFETY INFORMATION Warning Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal injury, and death. The drivers primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehicle systems which take the drivers eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle. Infinity is a trademark of Harman International Industries, Inc. At launch, the Apple iPhone will be the only UVO eServices compatible device. iPhone is a registered trademark of Apple Inc. Apple iOS6 compatibility expected early 2013. Additional compatible devices expected late 2013. App Store is a service mark of Apple Inc. No charge for the UVO eServices app. App runs on your smartphone cellular data service. Normal data rates will apply. HD RadioTM and the HD RadioTM logo are proprietary trademarks of iBiquity Digital Corporation. 24-hour Roadside Assistance is a service plan provided by Kia Motors America, Inc. Certain limitations apply. Coverage details are available in the Kia Warranty and Consumer Information Manual. For access to Enhanced Roads ide As s i s tance, a connected mobile phone via Bluetooth within the cellular service coverage area is required. Vehicle Diagnostics do not take the place of regularly scheduled maintenance. Feature checks powertrain, chassis, and airbag systems only. For factory-recommended maintenance schedule, see the Maintenance Feature of UVO eServices or the Owner's Manual. 911 Connect activates after an airbag deployment. Feature requires a connected mobile phone via Bluetooth. Dependant on cellular service coverage. The rear-camera display is not a substitute for proper and safe backing-up procedures. The rear-camera display may not display every object behind the vehicle. Always drive safely and use caution when backing up. PART 1 GETTING STARTED PART 1 GETTING STARTED Controls and Features Control Panel 1 2 3 4 5 12 11 10 9 8 6 7 No will be shown if the exterior Amplifier feature is not supported. 1-2 PART 1. GETTING STARTED 1 DISC EJECT Ejects the inserted disc. 2 FM/AM Turns on FM/AM mode. Each press of the FM/AM key will change the band in the order of FM AM FM. 3 SAT Turns on SIRIUSTM mode. 4 MEDIA Turns on MEDIA mode. Each press of the MEDIA key will change the mode in the order of CD USB/iPod/zuneJUKEBOX AUX BT Audio PANDORA CD. 5 POWER/VOLUME Push : Turns Power On/Off. Dial : Turns Volume Up/Down. 6 SEEK/TRACK Short (under 0.8 seconds) In FM/AM mode, automatically searches and plays the previous or next frequency. I G E T T N G S T A R T E D In SIRIUSTM mode, automatically searches and plays the previous or next channel. In MEDIA mode (CD, MP3, USB, iPod, zune, BT AUDIO), plays the previous or next track, song, or file. In PANDORA Radio, PANDORA Radio skip (Seek up). In JUKEBOX mode, plays the previous or next track. Long (over 0.8 seconds) In FM/AM mode, quickly moves through the frequencies when the button is pressed and held. Once released, automatically searches and plays the previous or next frequency. In SIRIUSTM mode, quickly moves to the previous or next channel. In MEDIA mode (CD, MP3, USB, iPod, zune, BT AUDIO), REW/FF the current track, song, or file. In JUKEBOX mode, REW/FF the current track. 7 CATEGORY 10 PHONE In SIRIUSTM mode, moves to the previous or next SIRIUSTM category. Displays Bluetooth wireless technology Phone mode. 11 eServices Displays UVO eServices mode. 12 CLOCK 8 TUNE In FM/AM mode, turn the knob to manually search for frequencies. In SIRIUS TM mode, turn the knob to manually search for channels. Press the knob to receive the selected channel. In MEDIA mode (CD, MP3, USB, iPod, zune), turn the knob to manually search for the previous or next track, song, or file. Press the knob to receive the selected track, song, or file. In PANDORA Radio, searches PANDORA Radio stations. In JUKEBOX mode, turn the knob to manually search for the previous or next track. Press the knob to receive the selected track. 9 SETUP Displays SETUP mode. PART 1. GETTING STARTED 1-3 PART 1 GETTING STARTED Steering Wheel 4 3 2 1 6 7 1-4 PART 1. GETTING STARTED 1 SEEK/TRACK Short (under 0.8 seconds) In FM/AM mode, automatically searches and plays the previous or next preset frequency. In SIRIUSTM mode, automatically searches and plays the previous or next preset channel. In MEDIA mode (CD, MP3, USB, iPod, zune, BT AUDIO), plays the previous or next track, song, or file. In PANDORA Radio, PANDORA Radio skip (Seek up). In JUKEBOX mode, plays the previous or next track. Long (over 0.8 seconds) In FM/AM mode, quickly moves through the frequencies when the button is pressed and held. Once released, automatically searches and plays the previous or next frequency. In SIRIUSTM mode, quickly moves to the previous or next channel. In MEDIA mode (CD, MP3, USB, iPod, zune, BT AUDIO), REW/FF the current 5 track, song, or file. In JUKEBOX mode, REW/FF the current track. 2 + VOLUME -

Turns Volume Up/Down. 3 MODE Short (under 0.8 seconds) Changes the mode. Each press will change modes in the order of FM AM SIRIUS TM CD USB/iPod /zune J U K E B O X A U X B T A u d i o PANDORA FM. Long (over 0.8 seconds) While the system is off, turn the system on. While the system is on, turn off the system. 4 MUTE Mutes the sound. 5 Voice Command Short (under 0.8 seconds) If Voice recognition is off, turns on Voice recognition. If system is speaking, interrupts speaking and enters listening mode. Long (over 0.8 seconds) If Voice recognition is on, turns off Voice recognition. 6 SEND (Bluetooth wireless technology Phone) Pressing this key will receive an incoming call. If the Audio is on, the Bluetooth wireless technology phone screen will be displayed. When a SMS message is received, reads back message. 7 END (Bluetooth wireless technology Phone) Pressing this key will reject an incoming call. If pressed during a call, the current call will be ended. When a SMS message is received, ignores message. I G E T T N G S T A R T E D PART 1. GETTING STARTED 1-5 PART 1 GETTING STARTED Basic Features System Power 1. Turning System Power On 1. Turn on the ignition. 2. While the system is off, press the 3. The system will automatically restore the most recently played mode. For example, pressing the POWER/VOL knob will turn on the system and display FM radio mode if FM mode had been the last operated mode prior to turning off the system. 4. You can also turn the system on by pressing the FM/AM , SAT and MEDIA keys. Note If the system power was on when the ignition was turned off, the system will turn back on automatically. Conversely, if the system power was off when the ignition was turned off, the system will remain off. If the battery voltage is low, the audio may take a prolonged time to boot upon turning on the vehicle. Note

Pressing any one of the FM/AM , SAT , and MEDIA keys will turn on the system and display the last mode corresponding to each key. For example, pressing the MEDIA key while a CD or other media source is loaded, will turn on the system and display CD mode if the last operated MEDIA mode prior to turning off the system had been CD mode. 2. Turning System Power Off 1. While the system is on, press the POWER/VOL knob to turn the system on. POWER/VOL knob to turn off the system. 1-6 PART 1. GETTING STARTED I G E T T N G S T A R T E D Select Display Language 2. Press the Main button. The UVO system allows you to select the preferred display language for maximum convenience and system usability. The system provides you with options of three languages -

English, French (Canadian) and Spanish. The default language is English. 3. Press the English button next to the Language menu. Resetting and Initializing UVO system 1. Resetting the system If the system is behaving abnormally, press the reset button to reset the system. 1. Press the SETUP key on the control panel. 4. Select the desired language. 5. The system will reboot and automatically restore the most recent mode in the new language. 1. Use a ball-point pen or similar object to press the RESET key. 2. The system will reboot and automatically restore the most recent mode. Caution

The reset button should only be used in case of system malfunction. Never use the reset key while the system is operating normally.

If you wish to reset while the system is operating normally, turn the power off first then reset. PART 1. GETTING STARTED 1-7 PART 1 GETTING STARTED 2. Initializing the system 1. Press the SETUP key on the control panel. 2. Press the System button. 3. Press the Factory defaults button. Note

Initializing the system will erase all Phone settings, and other changes which you have made to the system.

Some songs in the USB or CD may be misrecognized during the indexing process. If such problems persist, reset the device using the Factory Defaults button in SETUP>System.

For updating the system, visit http://www.kia. com 1-8 PART 1. GETTING STARTED Sound and Display Settings JUKEBOX) to enter Sound Setup. Sound Settings Sound settings can be adjusted from any audio mode. The system allows you to optimize various sound settings to add convenience when listening to the system. Note

Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. 1. FADER/BALANCE Fader/Balance allows you to adjust the position of sound within the vehicle. For instance, adjusting the sound so that it is closer to the driver-side seat will proportionally lower the volume in the passenger-side and rear seats. 2. Use the , , , buttons to make adjustments to the sound position. 3. Press the button to return to Sound Setup. Note

Press the Default button to restore the default setting. 1. Press the Fader/Balance setting button. Press the Sound button on the main screen of each audio mode (FM/AM, SIRIUSTM, MEDIA, PART 1. GETTING STARTED 1-9 I G E T T N G S T A R T E D PART 1 GETTING STARTED 2. TONE Tone allows you to make changes to the Treble, Middle and Bass settings. Note

Press the Default button to restore the default setting. 3. Touch Screen Beep Touch Screen Beep allows you to turn on/off the beep that sounds when you touch the screen. 4. Speed Dependent Volume Control Speed Dependent Volume Control allows you to automatically control the volume according to the speed of the vehicle. This feature will gradually increase the volume as speed increases to offset outside noise. 1. Press the Tone setting button. 2. Use the , buttons to make adjustments to the Treble, Middle and Bass. Press the button to return to Sound Setup. 1-10 PART 1. GETTING STARTED 1. In Sound Setup, press the On or button next to the Touch Screen Off Beep menu to turn the feature on or off. 1. Press the On or button next to the Speed Dependent Volume Control menu to turn the feature on or off. Off Display Settings The various Display setup options offered within the UVO system allow you to change display settings according to your personal preference. 1. Press the SETUP key on the control panel. Note

Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. 1. Setting Brightness The UVO system allows you to control the screen brightness automatically and manually. Automatic Brightness Control When the Display brightness is set to automatic, the brightness will be controlled automatically by assessing the amount of ambient light. 2. Press the Automatic button. Manual Brightness Control 1. Press the Display button. 2. Press the Display button to enter Display Setup mode. 1. Press the Display button. PART 1. GETTING STARTED 1-11 I G E T T N G S T A R T E D PART 1 GETTING STARTED Note

When Brightness control is set to Automatic

, the manual , buttons are not active.

Press the Default button to restore the default setting. Turning Display On and Off This feature turns off the display, allowing you to listen only to the audio. It is a useful feature when you are driving at night and wish to eliminate glare from the display. Even when the display is off, audio will still be played. 2. Press the Daylight or Night buttons. 3. Use the ,  buttons to make adjustments to the display brightness. 1-12 PART 1. GETTING STARTED 1. Press the Display button. 2. Press the Display off button. I G E T T N G S T A R T E D 3. Press any key on the control panel or steering wheel controller to turn the display back on. Note

Touching any place on the screen will also turn on the display. Turn Text Scroll On and Off Text shown on the screen can be scrolled. Turning on this feature is helpful when viewing long lines of text on the screen. 3. Press the On or button next to the Text Scroll menu to turn the feature on or off. Off 1. Press the SETUP key on the control panel. 2. Press the Main button. PART 1. GETTING STARTED 1-13 1-14 PART 1. GETTING STARTED PART 2 AUDIO FEATURES PART2. Table of contents 2-1 PART 2 AUDIO FEATURES FM/AM MODE FM/AM Mode Screens and Features 1 Mode display Displays the FM /AM mode. 2 PRESET indicator If listening to a preset, displays the preset number. 3 Frequency Displays the current frequency. 12 13 10 11 4 Program Type 5 4 If data is being transmitted, displays the program type. 5 Program Service Name If data is being transmitted, displays the program service name. 6 Radio text If data is being transmitted, displays radio text information. 7 HD RadioTM (Optional) Changes HD RadioTM stations. Becomes active when an HD RadioTM 1 8 9 2 14 15 3 7 6 2-2 PART 2. AUDIO FEATURES broadcast is being received. 8 Radio Icon When pressed while listening to RDS or HD Radio(Optional) stations, displays infor-

mation about the current station (frequency, station, artist, title). 9 Presets Enters Preset list screen. 10 Scan Scans all frequencies and plays only fre-

quencies with high quality reception for 5 seconds each. 11 Sound Enters Sound Setup. 12 HD RadioTM Station Channel Number

(Optional) Displays the channel number for the cur-

rent HD RadioTM station. 13 HD RadioTM Station name (Optional) Displays the name of the HD RadioTM Station. Listening to the FM/AM radio 14 Artist name (Optional) Displays the artist name. 15 Song Title (Optional) Displays the title name. 1. Press the FM/AM key on the control panel. The most recently played FM/AM radio band will automatically begin playing. 2. Press the FM/AM key to switch to the desired radio band. Note

Each press of the FM/AM key will change the band in the order of FM AM FM.

Even when the system power is off, press the FM/AM key to turn on the most recently played FM/AM mode.

The RDS (Radio Data System) operates in areas with FM stations broadcasting RDS signals. 1. Selecting a broadcast frequency The UVO system provides you with various ways to search for radio broadcasts. There are 3 ways to select radio broadcasts- selecting through SEEK, selecting through manual search, and selecting through presets. Selecting through SEEK TRACK or SEEK Press the SEEK TRACK keys on the control panel for under 0.8 seconds. As SEEK operates, the previous or next radio broadcasts with high quality reception will automatically be searched and played. Note

While SEEK is operating, pressing the same SEEK TRACK key will terminate SEEK. Pressing the opposite key will operate SEEK in the reverse direction.

Press and hold the SEEK TRACK or SEEK TRACK keys

(over 0.8 seconds) to quickly move through the frequencies while the button is pressed and held. Once released, the system will automatically search and play the previous or next frequency. PART 2. AUDIO FEATURES 2-3 I A U D O F E A T U R E S PART 2 AUDIO FEATURES Selecting through manual search 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direction. Each click will increase or decrease the frequency by 1 step (FM:

0.2MHz, AM: 10kHz). 2. When you find the desired radio broad-

cast, stop turning the TUNE knob to lis-

ten to the selected frequency. Selecting through preset 1. Press the Presets button. 1. Select the desired radio broadcast. 2. Press the Presets button. 3. From the preset list, press and hold (over 0.8 seconds) the preset number button to which you wish to save. 4. The current radio broadcast will automati-

cally be saved to the preset number. A beep will signify that the preset has been saved if the beep is set to ON in the sound settings. 2. Select the desired preset and press the button to start listening. Note

Press the , keys (under 0.8 sec-

onds) on the steering wheel controller to flip through the presets sequentially. Press and hold the , keys (over 0.8 seconds) on the steering wheel controller to operate SEEK. 2. Storing presets Presets are a way for you to save your favorite radio broadcasts. Up to 12 presets can be saved in FM mode while up to 6 frequencies can be saved in AM mode. 2-4 PART 2. AUDIO FEATURES 3. Scanning FM/AM broadcast frequencies Radio broadcasts can be scanned to conve-

niently find radio broadcasts with high quality reception. Each radio broadcast will be played for 5 seconds. This feature is particularly use-

ful when traveling in new areas. 4. Preset Scan Preset scan will scan presets in the current band (FM-12 presets, AM-6 presets)in sequential order. Each preset will be played for 5 seconds. 5. Listening to HD RadioTM Stations

(Optional) HD RadioTM Technology is a digital radio tech-

nology used by AM and FM radio stations to transmit audio and data via a digital signal in conjunction with their analog signals. 6. Viewing FM/AM Station information When listening to an HD RadioTM station or RDS radio station, you will be able to view sta-

tion information. 1. Press the Radio icon. 1. Press the Scan button. Note

When scanning has completed an entire revolution, the scan function will terminate automatically and the previously played fre-

quency will be restored. 1. While listening to the radio, the HD RadioTM icon will become displayed if receiving an HD RadioTM broadcast. 2. Press the HD button to change to a dif-

ferent HD RadioTM station. 2. Information about the current station (fre-

quency, station, artist, title) will be displayed. PART 2. AUDIO FEATURES 2-5 I A U D O F E A T U R E S PART 2 AUDIO FEATURES SIRIUSTM MODE SIRIUSTM Mode Screen and Features 5 Channel name Displays the channel name. 6 SIRIUSTM Icon When pressed, displays information about the current channel (artist, title, composer and other information). 4 5 1 2 11 12 3 6 7 8 9 10 1 Mode display Displays the current mode as SIRIUSTM mode. 2 Channel number Displays the current channel number. 7 Presets Enters Preset list screen. 8 List Displays the channel or category list. 9 Search Displays the channel search screen. 10 Sound Enters Sound Setup. 3 PRESET indicator If listening to a preset, displays the preset number. 11 Artist Displays the artist name. 4 Category name Displays the category name. 2-6 PART 2. AUDIO FEATURES 12 Title Displays the title. Listening to the SIRIUSTM radio Press the SAT key on the control panel. The most recently played SIRIUSTM channel will automatically begin playing. Note

Even when the system power is off, pressing the SAT key will turn on the most recently played SIRIUSTM channel. 1. Selecting a SIRIUSTM channel Selecting through SEEK Press the SEEK TRACK keys on the control panel for under 0.8 seconds. As SEEK operates, the previous or next SIRIUSTM chan-

nel will automatically be searched and played. TRACK or SEEK Note

Press and hold the SEEK TRACK or SEEK TRACK keys

(over 0.8 seconds) to quickly move through the channels while the button is pressed and held. Once released, the system will automat-

ically search and play the previous or next channel. Selecting through preset Selecting through channel search Selecting through manual search 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direc-

tion. Each click will display the corre-

sponding channel information. 2. When you find the desired SIRIUSTM chan-

nel, press the TUNE knob to listen to the selected channel. 1. Press the Presets button. 2. Select the desired preset and press the button to start listening. Note

Press the , keys (under 0.8 sec-

onds) on the steering wheel controller to flip through the presets sequentially. 1. Press the Search button. The channel search screen will be displayed. 2. Input the desired channel number and press the Done button. To delete entries, press the Delete button. Note

If you input a number where there is no channel, the Done button will become inactive. PART 2. AUDIO FEATURES 2-7 I A U D O F E A T U R E S PART 2 AUDIO FEATURES Selecting through SIRIUSTM category list 2. Using Skip 1. Press the List button. 1. Press the List button. 3. Select the channels you wish to skip. will be displayed When selected, an next to the selected channel. 2. Select the desired channel to start listen-

ing or press the Category List button to display the channels in the selected category. 2. Press the Skip Setting button. 2-8 PART 2. AUDIO FEATURES 3. Storing presets 4. The current radio broadcast will automati-

cally be saved to the present number. A beep will signify that the preset has been saved if the beep is set to ON in the sound settings. 4. Viewing SIRIUSTM channel information Presets are a way for you to save your favorite SIRIUSTM channels. Up to 18 presets can be saved in SIRIUSTM mode. 1. Select the desired SIRIUSTM channel. 2. Press the Presets button. 1. Press the SIRIUSTM icon. 3. From the preset list, press and hold (over 0.8 seconds) the preset number button to which you wish to save. 2. Information about the current channel

(channel, category, artist, title) will be displayed. PART 2. AUDIO FEATURES 2-9 I A U D O F E A T U R E S PART 2 AUDIO FEATURES MEDIA MODE The MEDIA mode within your UVO system offers a variety of media modes which allow you convenience and ease in operating your system. Media mode includes a variety of modes, such as audio CD, MP3 CD, USB, iPod, zune, BT audio, Aux and Pandora. The features listed below describe common fea-

tures which you will encounter when operating Audio CD, MP3 CD, USB, iPod, zune, and JUKEBOX modes. 2-10 PART 2. AUDIO FEATURES Common Features Play/Pause REW/FF 1. Insert or connect the desired media (Audio CD, MP3 CD, USB, iPod, zune) or press the MEDIA key on the control panel if the desired media has already been inserted or connected. 2. Each press of the MEDIA key will change the mode in the order of CD USB/

iPod/zune JUKEBOX AUX BT Audio Pandora CD. 3. When a desired media is playing and you wish to pause, press the button next to the progress bar. Press the button to restart the song. ll 1. Press and hold the SEEK TRACK or SEEK TRACK keys (over 0.8 seconds) on the control panel or the , keys (over 0.8 seconds) on the steering wheel controller. 2. The song will rewind or fast-forward at a rate 20 times faster than normal while the key is being held. 3. Release the key to play from the current position. Note

If you rewind to the beginning of the current song, the current song will automatically begin playing.

If you fast-forward to the end of the current song, the next song will automatically begin playing. Jump Using Repeat The repeat setting can be used to repeat the song that is currently playing. Using Shuffle The Shuffle setting can be used to play all song in the current mode randomly. 1. You can jump to different points in a song by touching the position on the progress bar. 1. Press the Repeat button. The 'Repeat'

1. Press the Shuffle button. The 'Shuffle'

icon will be displayed. icon will be displayed. 2. Press once to turn on the Repeat setting 2. Press once to turn on the Shuffle setting and again to turn off. and again to turn off. PART 2. AUDIO FEATURES 2-11 I A U D O F E A T U R E S PART 2 AUDIO FEATURES AUDIO CD MODE Cautions upon handling Audio CDs 1. Precautions upon handling discs Store discs within their intended cases to prevent scratches. Never use heart-shaped, octagon-

shaped or any other abnormally shaped discs. Never expose discs to direct sunlight for prolonged periods of time. Such expo-

sure may lead to disc deformation. Never clean with solvents, such as anti-

static sprays, cleaners, benzene, or thinners. Dust, scratches, and other foreign sub-

stances may cause popping sounds as well as sound deterioration. Never place paper on either side of the disc or write on disc surfaces. Clean fingerprints and dust off the signal surface (coated side) of the disc with a soft cloth. 2-12 PART 2. AUDIO FEATURES Copy-protected CDs, such as S-type CDs may not operate properly in the system. Data CDs are not supported by the system. 2. For safe and efficient operation Never disassemble the CD Player(CDP) for repair purposes. Contact your place of purchase in case of malfunction. (Full service assistance will not be provided if the user disassembles the device.) Use caution not to introduce foreign sub-

Never use water to clean the system. stances into the disc slot. The system may not operate in extremely hot or cold temperatures. (The opera-

tional temperature range is: 14 ~ 149). Steam may condense on the fiber optic lens due to rain, wet conditions, or heat caused by system operation. Never clean the system with chemical solvents. Always use a clean and dry cloth. 3. Supported disc format The disc types supported by this device are as shown below. CD Disc format Disc media CD CD-R CD-RW Format CD-DA MP3 WMA CD-ROM CD-TEXT Disc Size 5inch (12.7cm) Disc Format CD MP3 WMA Audio Format LPCM MPEG1, Layer3 MPEG2, Layer3 MPEG2.5 Ver. 9

 CD-R or CD-RW DISC burned with a bulk CD without quality guarantees may not be recognized by the device.

 Inserting an abnormal disc may result in faulty operation.

 CD-R/RW discs burned as audio CDs which have not been finalized are not supported by the device. However, some information, such as play time, may still be displayed. 4. Disc/content format and compatibility Ordinary disc compatibility

 This system has been designed to be compatible with software bearing the fol-

lowing logo marks.

 CD-R/RW discs (Audio CD and MP3 CD) created with CD-writing devices or per-

sonal computers may not operate properly. Special formats or special features regarding software CD-R/RW Compatibility

 This system operates as a CD-ROM and supports CD-R and CD-RW discs in CD audio or MP3 CD format. PC-created DISC compatibility

 When burning a disc with a personal computer, even discs compatible with the formats described above may not oper-

ate properly due to software settings within the burning application. In such cases, contact the software developer.

 Additional information regarding compati-

bility can be found on the CD-R/RW soft-

ware disc box.

 DVD-R/RW discs are not supported by the device. Compressed audio compatibility This system plays audio files compressed by MPEG-1 audio stream layer 3(MP3) using 32, 44.1 and 48kHz fixed bit rates. Incompatible files are not supported.

 Variable bit rate files may operate, but the play time information may not be properly displayed.

 Physical formats of CD: Model 1, Model 2 XA format 1.

 This system only supports tracks with file extension of ".MP3" or ".WMA".

 This system does not support multises-

sion discs.

 This system supports a maximum of 256 folders and maximum 512 files. Folders and files which exceed this limit will not be supported.

 There are various bit rates which can be encoded onto MP3 files. This system has been designed to be compatible with vari-

ous bit rates. Audio which has been encoded at 128kbps will sound similar to CD audio sound quality. Although this device supports low bit rate MP3 files, such files may result in a low quality sound.

 For stable operation, the use of files in 95kbps~192kbps bit rate range and 44.1kHz sampling frequency is recommended.

 For Mixed CDs (MP3+CD-DA), only CD-DA files will be recognized and supported. PART 2. AUDIO FEATURES 2-13 I A U D O F E A T U R E S PART 2 AUDIO FEATURES AUDIO CD Mode Screen and Features 4 Sound Enters Sound Setup. 1 5 2 3 8 7 6 4 5 Track Number Displays the track number 6 Play Time Displays the play time. 7 Current/Total Track Number Displays the current track number and total number of tracks on CD. 8 DISC indicator Displays that a DISC has been inserted. 1 Mode Display Displays that the current mode is CD mode. 2 Repeat If Repeat is operating, the current track will be repeated and the corresponding icon will be displayed. 3 Shuffle If Shuffle is operating, the tracks will be played in random order and the corresponding icon will be displayed. 2-14 PART 2. AUDIO FEATURES Inserting/Ejecting a Disc 1. Inserting a Disc Insert the disc into the slot. The disc will begin playing automatically after it has been inserted. 2. Ejecting a Disc Press the The disc will immediately be stopped and ejected. button. Note

If the disc is straddled on the slot without removing for approximately 10 seconds, the disc will be re-inserted automatically into the disc player. In such cases, the disc will not begin playing automatically. Listening to an Audio CD Selecting a CD track 1. Insert a CD or press the MEDIA key on the control panel if the CD has already been inserted. 2. When a track is playing and you wish to button next to the pause, press the progress bar. Press the button to restart the track. ll Note

When playing a CD-TEXT, the title and artist will also be displayed. 1. Selecting through Track Up/Down 1. Press the SEEK TRACK or SEEK TRACK keys on the control panel or the or keys on the steering wheel controller to play the desired track. 2. The previous or next track will begin playing. Note

If the SEEK TRACK key on the Control panel or key on the steering wheel controller are pressed and released after the track has played for more than 3 seconds, the start of the current track will begin playing. If the track has been playing for less than 3 sec-

onds, the start of the previous track will begin playing. 2. Selecting through manual search 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direction. Each click will display informa-

tion about the selected track. 2. Press the TUNE knob to play the selected track. Note

The current track will continue playing even as you search tracks through the TUNE knob. PART 2. AUDIO FEATURES 2-15 I A U D O F E A T U R E S 6. Precaution

 Use an MP3 bit rate which is less than 128 kbps. The sound quality cannot be g u ar a nte e d fo r M P 3 s exc e e d i n g 128kbps. PART 2 AUDIO FEATURES MP3 CD MODE Cautions upon handling MP3 CD 1. Precautions upon handling discs

 Acceptable standard: MPEG1 AUDIO LAYER 3

 Acceptable sampling frequency: 32, 44.1, 48 (KHz)

 Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320

(kbps)

 Recommended bit rate & reference sam-

pling frequency: sampling frequency 96,128, 192 kbps fixed bit rate /44.1KHz 2. ID3 tag

 This device supports ID3v1.0, ID3v1.1, ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags. 3. Supported media

 The MP3 media supported by the device are CD-ROM and USB. 2-16 PART 2. AUDIO FEATURES 4. Supported media formats

 This device supports ISO9660 LEVEL1 and LEVEL2. Detailed specification is as below.

 Maximum directory layers: 8 layers

 Maximum folder length: 64 Bytes, file name length: 64 Bytes

 Maximum number of folders which can be stored onto one disc: 256 folders

(including ROOT directory)

 Maximum number of files which can be stored onto one disc: 512 files 5. Precautions upon burning MP3 files

 The use of ISO 9660 LEVEL 2 JULIET format is recommended when burning MP3 files. Burning in other formats may abnormally display the file names.

 It is possible to display up to 32 charac-

ters for file and folder names in case of UNICODE, and up to 64 characters in case of ASCII.

 The full length of the artist name and the song title can be displayed by using the scroll function. MP3 CD Mode Screen and Features 10 8 12 11 9 5 7 6 1 2 3 4 1 Mode Display 5 Shuffle If Shuffle is operating, the songs will be played in random order and the corre-

sponding icon will be displayed. 12 DISC indicator Displays that a DISC has been inserted. Listening to an MP3 CD 6 Sound Enters Sound Setup. 7 Play Time Displays the play time. Displays that the current mode is MP3 CD mode. 8 Artist name Displays the artist name. 2 Menu Displays the categories and song lists for the MP3 CD. 9 Song Title Displays the song title. 3 Copy Copies current song into JUKEBOX. 4 Repeat 10 Album Art Icon When pressed, displays information about the current song (artist, title, album and other information). If Repeat is operating, the current song will be repeated and the corresponding icon will be displayed. 11 Current/Total Track Number Displays the current track number and total number of tracks on the current playing list. 1. Insert an MP3 CD or press the MEDIA key on the control panel if the CD has already been inserted. 2. When a song is playing and you wish to pause, press the button next to the progress bar. Press the button to restart the song. ll Note

For some media formats, the system may require time for media indexing. In the case of MP3 CDs, the system may take 1.5sec / song. PART 2. AUDIO FEATURES 2-17 I A U D O F E A T U R E S PART 2 AUDIO FEATURES Selecting an MP3 CD song 3. Selecting from MP3 list 1. Selecting through song Up/Down 1. Press the SEEK TRACK or SEEK TRACK keys on the control panel or the or keys on the steering wheel controller to play the desired track or song. 1. Press the Menu button. Note

If the SEEK TRACK key on the Control panel or key on the steering wheel controller is pressed and released after the song has played for more than 3 seconds, the start of the current song will begin playing. If the song has been playing for less than 3 seconds, the start of the previous song will begin playing. 3. Press the name of the song from the list. The song will automatically start playing. Note

In the MP3 list screen, the TUNE knob can also be used to select songs. 4. By Artists, Albums, Genres, Songs, Composers 2. Selecting through manual search 2. Press the Now Playing button. 1. Press the Menu button. 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direction. Each click will display informa-

tion about the selected song. 2. Press the TUNE knob to play the selected song. 2-18 PART 2. AUDIO FEATURES 2. Choose the category through which you wish to select the song. MP3 CD mode allows you to select by Playlists, Artists, Albums, Genres, Songs, and Composers. Explore CD Explore CD is a feature which allows you to browse files and folders of the CD by the names of categories. 1. While in the MP3 CD Menu screen, press the Explore CD button. 2. Search the corresponding files and folders to select the desired song. Viewing song information Copying songs into JUKEBOX When listening to an MP3 CD song, you can browse through song details and information. 1. Copying the current song The UVO system allows you to copy songs from an MP3 CD into JUKEBOX. 1. Press the Album art icon. 2. The song information (Artist, Title, Album, Genre) for the current MP3 song will be displayed. 3. Press the button to return to the pre-

vious screen. TRACK or SEEK Note

Even as you browse through song information, you can use the SEEK TRACK keys on the control panel or or keys on the steering wheel controller to select different MP3 songs. For more information, refer to the

'Selecting an MP3 CD song' section. 1. Press the Copy button. 2. Once copying is complete, you can listen to copied music in JUKEBOX mode. PART 2. AUDIO FEATURES 2-19 I A U D O F E A T U R E S PART 2 AUDIO FEATURES 2. Copying songs from list Copying MP3 songs from lists allows you to simulta-

neously select several songs to copy into JUKEBOX. 2. Press the Now Playing button. 1. Press the Menu button. 3. Press the Edit button. 4. Select the songs you wish to copy. When selected, a will be displayed next to the song. To select all songs in the list, press the Select All button. 5. After selecting the desired songs, press the Copy button. 2-20 PART 2. AUDIO FEATURES 6. Once copying is complete, you can listen to copied music in JUKEBOX mode. Note

If memory is already full and songs can no lon-

ger be copied, the Memory full! Please delete music from your JUKEBOX message will be displayed and you must delete songs from JUKEBOOX in order to add additional songs. For more information on deleting JUKEBOX songs, refer to the Deleting JUKEBOX section.

When copying MP3 CD songs, you can lis-

ten to all modes except CD mode and JUKEBOX mode.

Copying can be canceled at anytime. While copying is in progress, press the Cancel button. USB MODE Cautions upon handling USB MP3 4. Supported media formats

 This device supports ISO9660 LEVEL1 and LEVEL2. Detailed specification is as below. 1. The MP3 file standards supported by

 Maximum directory layers: 16 layers the device are as follows.



 Acceptable standard: MPEG1 AUDIO 5. Precautions upon formatting USB &

LAYER 3

 Acceptable sampling frequency: 32, 44.1, 48 (kHz)

 Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, and 320 (kbps)

 Recommended bit rate & reference sam-

pling frequency: 96,128, 192 kbps fixed bit rate /44.1kHz 2. ID3 tag

 This device supports ID3v1.0, ID3v1.1, ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags. 3. Supported media

 The MP3 media supported by the device are CD-ROM and USB. downloading MP3 files

 The device only supports FAT type USB file system. The device will not play USB media content if the USB is NTFS type. 6. Precautions

 Use an MP3 bit rate which is less than 192kbps and a fixed bit rate. The sound quality cannot be guaranteed for MP3s exceeding 192Kbps. Certain features may operate abnormally when playing MP3 formats with variable bit rates, such as being limited to FF/REW. PART 2. AUDIO FEATURES 2-21 I A U D O F E A T U R E S PART 2 AUDIO FEATURES Precautions upon handling USB Caution

When using an external USB device, make sure to connect the device after turning on the ignition. The USB device may be dam-

aged if connected before the ignition is turned on.

 The USB device may fail to operate when playing formats other than MP3 or WMA formats.

 Only MP3 files with compression rates between 8kbps~320kbps are supported.

 Only WMA files with compression rates between 8kbps~320kbps are supported.

 Be cautious of static electricity when connecting/disconnecting an external USB device.

 Encoded MP3 Players will not be recog-

nized when connected as an external device.

 When connecting a USB device, the sys-

tem may not properly recognize some USB states. 2-22 PART 2. AUDIO FEATURES

 When formatting an external USB device, the system may not properly recognize byte/sector selections other than 512Byte or 2048Byte. size, or file formats stored on the USB. Such differences in time are not indica-

tions of malfunction. Please wait until the system becomes recognized.

 The device will recognize only USB

 This system supports only USB devices devices formatted in FAT 12/16/32. used to play music files.

 Some USB devices may not operate properly due to compatibility issues. Verify that the external device is sup-

ported by the system before use.

 Avoid contact between the USB connec-

tor with bodily par ts and foreign substances.

 Repeatedly connecting/disconnecting the USB in a short period of time may damage the system.

 A sound may occasionally occur when disconnecting the USB device.

 Do not disconnect a USB device when it is operating. Make sure to disconnect the USB device only after the audio power is turned off or when operating a different mode.

 The time required to recognize a USB device may differ depending on the type,

 Do not use the USB I/F to charge batteries or USB accessories that generate heat. This may lead to worsened performance or system damage.

 This system may not recognize the USB device if a separately purchased USB hub or extension cable is used. Connect the USB device directly to the terminal in the vehicle.

 Some mass storage USB devices may have multiple logical drives partitioned for user convenience. In such cases, only music files within the top-level logical drive will be supported.

 This system may not operate normally if the USB terminal is used to connect MP3 Players, mobile phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives).

 This system may not operate normally when using a USB memory type other than a metal cover type USB device.

 This system may not operate normally when using HDD, CF, or SD memory formats.

 This system does not support DRM

(Digital rights management) locked files.

 The device may not operate normally during severe vehicle vibrations.

 Avoid using USB devices also used as key chains or mobile phone accessories. Connecting your USB device USB Mode Screen and Features Connect the USB as shown in the picture. 1 10 8 11 9 2 3 4 5 7 6 1 Mode Display Displays that the current mode is USB mode. 2 Menu Displays the categories and song lists for the USB. 3 Copy Copies current song into JUKEBOX. 4 Repeat If Repeat is operating, the current song will be repeated and the corresponding icon will be displayed. PART 2. AUDIO FEATURES 2-23 I A U D O F E A T U R E S Listening to USB music Selecting USB music PART 2 AUDIO FEATURES 5 Shuffle If Shuffle is operating, the songs will be played in random order and the corre-

sponding icon will be displayed. 6 Sound Enters Sound Setup. 7 Play Time Displays the play time. 8 Artist name Displays the artist name. 9 Song Title Displays the song title. 10 Album Art Icon When pressed, displays information about the current song (artist, title, album and other information). 11 Current/Total Track Number Displays the current track number and total number of tracks on the current playing list. 2-24 PART 2. AUDIO FEATURES 1. Connect a USB device or press the MEDIA key on the control panel if a USB device has already been connected. 2. When a song is playing and you wish to pause, press the button next to the progress bar. Press the button to restart the song. ll Note

For some media formats, the system requires time for media indexing. In the case of USB mp3 songs, the system will take 1.5ms/song

(Flash/HDD) or 40ms/song (mp3 players). TRACK or SEEK 1. Selecting through song Up/Down Press the SEEK TRACK keys on the control panel or the or keys on the steering wheel controller to play the desired song. Note

If the SEEK TRACK key on the Control panel or key on the steering wheel controller is pressed and released after the song has played for more than 3 seconds, the start of the current song will begin playing. If the song has been playing for less than 3 sec-

onds, the start of the previous song will begin playing. 2. Selecting through manual search 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direc-

tion. Each click will display information about the selected song. 2. Press the TUNE knob to play the selected song. 3. Selecting from the list 1. Press the Menu button. 3. Press the name of the song from the list. The song will automatically start playing. Note

If in the MP3 list screen, the TUNE knob can also be used to select songs. 4. By Folders, Artists, Albums, Genres, Songs, Composers 2. Choose the category through which you wish to select a song. USB Mode allows you to select by Playlists, Artists, Albums, Genres, Songs, and Composers. Explore USB Explore USB is a feature which allows you to browse files and folders of the USB by the names of categories. 2. Press the Now Playing button. 1. Press the Menu button. 1. While in the USB Menu screen, press the Explore USB button. PART 2. AUDIO FEATURES 2-25 I A U D O F E A T U R E S PART 2 AUDIO FEATURES 2. Search the corresponding files and folders to select the desired song. Copying songs into JUKEBOX 1. Copying the current song The UVO system allows you to copy songs from your USB device into JUKEBOX. Viewing song information When listening to USB music songs, you can browse through song details and information. 2. The song information (Artist, Title, Album, Genre) for the current USB song will be displayed. Press the button to return to the previous screen. TRACK or SEEK Note

Even as you browse through song information, you can use the SEEK TRACK keys on the control panel or or keys on the steering wheel controller to select different USB songs. For more information, refer to the

'Selecting music songs' section. 1. Press the Copy button. 1. Press the Album art icon. 2-26 PART 2. AUDIO FEATURES 2. Once copying is complete, you can listen to copied music in JUKEBOX mode. 2. Press the Now Playing button. 2. Copying songs from list Copying USB music songs from lists allows you to simultaneously select several songs to copy into JUKEBOX. 3. Press the Edit button. 1. Press the Menu button. 4. Select the songs you wish to copy. When selected, a will be displayed next to the song. To select all songs in the list, press the Select All button. 5. After selecting the desired songs, press the Copy button. 6. Once copying is complete, you can listen to copied music in JUKEBOX mode. Note

If memory is already full and songs can no longer be copied, the Memory full! Please delete music from your JUKEBOX message will be displayed and you must delete songs from JUKEBOX. For more information on deleting JUKEBOX songs, refer to the Managing JUKEBOX section.

When copying USB songs, you can listen to all modes except USB mode and JUKEBOX mode.

Copying can be canceled at anytime. While copying is in progress, press the Cancel button. PART 2. AUDIO FEATURES 2-27 I A U D O F E A T U R E S PART 2 AUDIO FEATURES iPod MODE About iPod 1. Trademark iPod is a registered trademark of Apple, Inc. 2. Connecting your iPod Device Connect your iPod device as shown in the picture. Caution

If a playing iPod is connected to the audio system, a high-pitched tone may occur for approximately 1-2 seconds. Please pause/

stop the iPod device prior to connecting it to the vehicle. Note

Suppor ted iPod devices: iPod Nano 2G/3G/4G/5G/6G, iPod Classic 5G/6G, iPod Touch 1G/2G/3G/4G, iPhone 3G/3GS/4/4S. The identification of the iPod device, battery recharge, and other functions provided by the iPod device is normally supported by using your iPod connector cable. 2-28 PART 2. AUDIO FEATURES iPod Mode Screen and Features will be displayed. Listening to your iPod 1 2 3 1 Mode Display 10 5 Sound Enters Sound Setup. 8 5 6 6 Play Time Displays the play time. 9 7 4 1. Connect an iPod device or press the MEDIA key on the control panel if an iPod device has already been connected. 2. When a song is playing and you wish to pause, press the button next to the progress bar. Press the button to restart the song. ll I A U D O F E A T U R E S 7 Artist name Displays the artist name. 8 Song Title Displays the song title. 9 Album Art Icon When pressed, displays information about the current song (artist, title, album and other information). Displays that the current mode is iPod mode. 2 Menu Displays the categories and song lists for the iPod. 3 Repeat If Repeat is operating, the current song will be repeated and the corresponding icon will be displayed. 4 Shuffle If Shuffle is operating, the song will be played in random order and the corresponding icon 10 Current/Total Track Number Displays the current track number and total number of tracks on the current playing list. PART 2. AUDIO FEATURES 2-29 PART 2 AUDIO FEATURES Selecting iPod music 3. Selecting from the list 3. Press the name of the song from the list. The file will automatically start playing. Note

In the iPod list screen, the TUNE knob can also be used to select the desired song. 4. By Artists, Albums, Genres, Songs, Podcasts, Composers, Audiobooks 1. Press the Menu button. 2. Press the Now Playing button. 1. Press the Menu button. 1. Selecting through song Up/Down TRACK or SEEK Press the SEEK TRACK keys on the control panel or the or keys on the steering wheel controller to play the desired song. Note

If the SEEK TRACK key on the Control panel or key on the steering wheel controller is pressed and released after the song has played for more than 3 seconds, the start of the current song will begin playing. If the song has been playing for less than 3 seconds, the start of the previous song will begin playing. 2. Selecting through manual search 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direc-

tion. Each click will display information about the selected song. 2. Press the TUNE knob to play the selected song. 2-30 PART 2. AUDIO FEATURES 2. Choose the category through which you wish to select. iPod mode allows you to select by Playlists, Artists, Albums, Genres, Songs, Podcasts, Composers and Audiobooks. Viewing song information When listening to your iPod, you can browse through song details and information. 1. Press the Album art icon. 3. Press the button to return to the previous screen. Note

Songs in the iPod can be properly played in UVO system only when they have been downloaded through iTunes.

If you receive a call or SMS while playing music from an iPhone, the music may not properly be restored after the call or SMS. In this case, disconnect and reconnect the iPhone.

After upgrading the iPod or iPhone firm-

ware, reboot the iPod or iPhone and con-

nect with the UVO system for normal operation.

Songs cannot be copied from iPod or iPhone to JUKEBOX. 2. The song information (Artist, Title, Album, Genre) for the current iPod song will be displayed. PART 2. AUDIO FEATURES 2-31 I A U D O F E A T U R E S zune Mode Screen and Features sponding icon will be displayed. PART 2 AUDIO FEATURES zune MODE About zune 1. Trademark zune is a registered trademark of Microsoft Corporation in the United States and or other countries. 1 2 3 7 9 4 10 8 5 6 2. Connecting your zune Device 1 Mode Display Connect your zune device as shown in the picture. 2-32 PART 2. AUDIO FEATURES Displays that the current mode is zune mode. 2 Menu Displays the categories and song lists for the zune. 3 Repeat If Repeat is operating, the current song will be repeated and the corresponding icon will be displayed. 4 Shuffle If Shuffle is operating, the songs will be played in random order and the corre-

5 Sound Enters Sound Setup. 6 Play Time Displays the play time. 7 Artist name Displays the artist name. 8 Song Title Displays the song title. 9 Album Art Icon When pressed, displays information about the current song (artist, title, album and other information). 10 Current/Total Track Number Displays the current track number and total number of tracks on the current playing list. Listening to your zune Selecting zune music 3. Selecting from the list 1. Connect zune device or press the MEDIA key on the control panel if zune device has already been connected. 2. When a song is playing and you wish to pause, press the button next to the progress bar. Press the button to restart the song. ll Note

When connecting some external media formats, the system requires time for media indexing. In the case of zune files, the system will take 60ms/song.

Songs cannot be copied from zune to JUKEBOX. 1. Selecting through song up/down TRACK or SEEK TRACK keys on the Press the SEEK control panel or the or keys on the steering wheel controller to play the desired song. Note

If the SEEK TRACK key on the Control panel or key on the steering wheel controller is pressed and released after the song has played for more than 3 seconds, the start of the current song will begin playing. If the song has been playing for less than 3 sec-

onds, the start of the previous song will begin playing. 2. Selecting through manual search 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direc-

tion. Each click will display information about the selected song. 2. Press the TUNE knob to play the selected song. 1. Press the Menu button. 2. Press the Now Playing button. PART 2. AUDIO FEATURES 2-33 I A U D O F E A T U R E S PART 2 AUDIO FEATURES 3. Press the name of the song from the list. The song will automatically start playing. Viewing song information 3. Press the button to return to the pre-

vious screen. 4. By Songs, Genres, Albums, Artists, Playlists When listening to your zune, you can browse through song details and information. 1. Press the Menu button. 1. Press the Album art icon. 2. Choose the category through which you wish to select. zune mode allows you to select by Songs, Genres, Albums, Artists, and Playlists. 2. The song information (Artist, Title, Album, Genre) for the current MP3 song will be displayed. 2-34 PART 2. AUDIO FEATURES AUX MODE AUX Mode Screen 1 Connecting an AUX media device Listening to AUX media Connect a cable from the headphone jack on your AUX device to the jack located in your vehicle. 1. Connect an AUX device or press the MEDIA key on the control panel if the AUX device has already been connected. 2 3 1 Mode Display Displays that the current mode is AUX mode. 2 AUX Status Displays the AUX connection status 3 Sound Enters Sound Setup. Note

Connecting your AUX device with the vehi-

cle will not provide power to your AUX device. If you plan on using your AUX device for long periods of time, make sure to charge the device using an A/C power adapter or a separate USB cable. 2. Once in AUX mode, the connected audio will automatically begin playing from the car system provided that your external device is turned on and playing audio. PART 2. AUDIO FEATURES 2-35 I A U D O F E A T U R E S PART 2 AUDIO FEATURES BT AUDIO MODE BT Mode Screen and Features 6 Phone Battery charge status BT Audio mode is a feature which allows you to stream music stored in your handset device via a Bluetooth wireless technology connec-

tion. Music saved in the handset device can be played in the car through Bluetooth wire-

less technology audio streaming. BT audio can be played only when a handset device has been connected. To play BT audio, pair a handset device with the system. If Bluetooth wireless technology is disconnected while playing BT audio, music play will be discontin-

ued. The audio streaming function may not be supported in some handset devices. Only one function can be used at a time between the Bluetooth wireless technology handsfree or BT audio function. Playing music from the car is not possible when there are no music files stored in the handset device. 2-36 PART 2. AUDIO FEATURES 6 7 8 1 2 3 4 5 1 Mode Display Displays the current mode as BT Audio mode. 2 Bluetooth wireless technology enabled device information Displays information about the Bluetooth wireless technology enabled device Displays the battery charge status of the connected mobile phone. The battery charge status may not be displayed in some mobile phones. 7 Signal Strength Displays the mobile phone signal strength. The signal strength may not be displayed in some mobile phones. 8 Bluetooth wireless technology connection state Becomes displayed when a Bluetooth wireless technology enabled phone has been connected with the car system. 3 Song Title Displays the song title. 4 Play/Pause Plays/pauses the song. 5 Sound Enters Sound Setup.

If music does not begin playing even after displaying the Phone music screen, try start-

ing the music directly from the Bluetooth wireless technology enabled device. Selecting a song 1. Press the SEEK TRACK or SEEK TRACK keys on the control panel or the or keys on the steering wheel controller to play the desired song. 2. The previous or next song will begin playing. Note

File selection may not be supported in some Bluetooth wireless technology enabled devices. Listening to music from your Bluetooth wireless technology enabled device 1. Pair your Bluetooth wireless technology enabled device to the handsfree system. For more information on pairing your Bluetooth wireless technology enabled devices, refer to the 'Pairing your handset device to the handsfree system' section. 2. Press the MEDIA key on the control panel to turn on BT audio mode. 3. When streaming music from your Bluetooth wireless technology enabled device and you wish to pause, press the button next on the screen. Press the button to restart music. ll Note

While music saved in the Bluetooth wire-

less technology enabled device will auto-

matically begin playing after converting to the BT Audio screen, this music player func-

tion may not be suppor ted in some Bluetooth wireless technology enabled devices. REW/FF a song TRACK or SEEK 1. Press and hold the SEEK TRACK keys (over 0.8 seconds) on the control panel or the , keys (over 0.8 sec-

onds) on the steering wheel controller. 2. The track will rewind or fast-forward at a rate 20 times faster than normal while the key is being held. 3. Release the key to play from the current position. Note

The play/pause, song selection and REW/

FF features are supported only in handset devices with AVRCP Ver. 1.3 or higher. If play control features are not working, first check the AVRCP version of your Bluetooth wireless technology enabled device.

When such operations are not supported, use the handset device to perform these functions. PART 2. AUDIO FEATURES 2-37 I A U D O F E A T U R E S PART 2 AUDIO FEATURES JUKEBOX MODE The UVO system offers you maximum conve-

nience by allowing you to copy songs from your MP3 CD and USB and store them to the JUKEBOX within the system. For more infor-

mation on copying songs into JUKEBOX, refer to the Copying songs into JUKEBOX section. JUKEBOX Mode Screen and Features 1 3 2 10 8 11 9 4 5 7 6 5 Shuffle If Shuffle is operating, the songs will be played in random order and the corre-

sponding icon will be displayed. 6 Sound Enters Sound Setup. 7 Play Time Displays the play time. 1 Mode Display D i s p lays t hat t he c ur rent m o d e i s JUKEBOX mode. 8 Artist name Displays the artist name. 2 Menu Displays the JUKEBOX folder and file lists. 9 Song Title Displays the song title. 3 Favorite Adds/removes current song to Favorites list. 10 Album Art Icon When pressed, displays information about the current song (artist, title, album and other information). 4 Repeat If Repeat is operating, the current song will be repeated and the corresponding icon will be displayed. 11 Current/Total Track Number Displays the current track number and total number of tracks on the current playing list. 2-38 PART 2. AUDIO FEATURES Listening to JUKEBOX 2. Selecting through manual search 2. Press the Now Playing button. 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direc-

tion. Each click will display information about the selected song. 2. Press the TUNE knob to play the selected song. 3. Selecting from the list 1. Press the Menu button. 1. Press the MEDIA key on the control panel to turn to JUKEBOX mode. 2. The system will automatically restore the most recently played song. Selecting a JUKEBOX song 1. Selecting through Track Up/Down 1. Press the SEEK TRACK keys on the control panel or the or keys on the steer-

ing wheel controller to play the desired track. 2. The previous or next song will begin playing. Note

If the SEEK TRACK key on the Control panel or key on the steering wheel controller is pressed and released after the track has played for more than 3 seconds, the start of the current track will begin playing. If the song has been playing for less than 3 sec-

onds, the start of the previous song will begin playing. 3. Press the name of the song from the list. The song will automatically start playing. PART 2. AUDIO FEATURES 2-39 I A U D O F E A T U R E S PART 2 AUDIO FEATURES 4. By Artists, Albums, Genres, Song, Adding Favorites Composers 3. To delete a song from Favorites, press the button. The Favorites feature allows you to create a separate Favorites list of songs. 1. Press the Menu button. 1. While listening to JUKEBOX, press the button. 2. Choose the category through which you wish to select. JUKEBOX mode allows you to select by Favorites, Artists, Albums, Genres, Songs, and Composers. 2-40 PART 2. AUDIO FEATURES 2. The heart icon will be displayed on the screen to signify that the song has been saved in Favorites. Playing Favorites 3. Press the name of the song from the list. The song will begin playing. Note

The Favorites button will be inactive when there are no songs saved as Favorites.

When deleting favorites from the Favorites list, the deleted favorites will be removed from the favorites list. The songs will not be deleted from the system. 1. While playing JUKEBOX, press the Menu button. 2. In the JUKEBOX Menu screen, press the Favorites button. PART 2. AUDIO FEATURES 2-41 I A U D O F E A T U R E S PART 2 AUDIO FEATURES Memory Management Checking System Information 1. Press the SETUP key on the control panel. Deleting JUKEBOX 1. Deleting JUKEBOX 1. While in JUKEBOX mode, press the Menu button. 4. The system information screen shows you the memory currently in use. 2. Press the System button. 2. Press the Now Playing button. 3. Press the System Information button. 3. Press the Edit button. 2-42 PART 2. AUDIO FEATURES I A U D O F E A T U R E S 4. Select the songs you wish to delete. When selected, a will be displayed next to the selected song. To select all songs, press the Select All button. All of the songs in the play list will be selected. 5. Press the Delete button. 2. Deleting all files 1. Press the SETUP key on the control panel. 3. Press the Delete all copy files button. 4. The system will reboot and automatically restore the FM mode. Note

When using the Delete all copy files feature, all JUKEBOX files will be deleted. 2. Press the System button. PART 2. AUDIO FEATURES 2-43 2. Start the PANDORA Radio application. Note Supported iPod devices:iPod Touch 2G/3G/4G, iPhone 3G/3GS/4/4S

PANDORA Radio is supported only in iOS devices. 1. Log into PANDORA Radio.

( This step can be omitted if you are already logged in.) PART 2 AUDIO FEATURES PANDORA MODE About PANDORA 1. Trademark iPod is a registered trademark of Apple, Inc. 2. Before Starting PANDORA 1. Connect your iPod or iPhone device as shown in the picture. The identification of the iPod device, battery recharge, and other functions provided by the iPod device is normally supported by using your iPod connector cable. 2-44 PART 2. AUDIO FEATURES PANDORA Mode Screen and eatures 1 9 3 2 8 10 4 5 6 5 Skip EMoves to the next file. 6 Sound Enters Sound Setup. 7 7 Play Time Displays the play time. 1 Mode Display D i s p lays t hat t he c ur rent m o d e i s PANDORA mode. 8 Station Name Displays the station name. 8 Artist name Displays the artist name. 9 Song Title Displays the song title. 2 Menu Displays the PANDORA Station lists and Bookmark options. 3 Thumbs Up Approves the song and keep it in your playlist. 4 Thumbs Down Disapproves the song and prevents that song from playing again. I A U D O F E A T U R E S Listening to your PANDORA 1. Press the MEDIA key on the control panel if an iPod device has already been connected and the PANDORA application is activated. 2. When a song is playing and you wish to pause, press the button next to the progress bar. Press the button to restart the song. ll PART 2. AUDIO FEATURES 2-45 PART 2 AUDIO FEATURES Selecting PANDORA station Bookmark Track or Artist 1. Press the Menu button. 1. Press the Menu button. 3. Press the name of the station from the list. The station will automatically start playing. Note

In the station list screen, the TUNE knob can also be used to find the desired station.

Upon selecting Shuffle from the Station list screen, stations are selected randomly and played. 2. PPress the Bookmark this track or Bookmark this artist button. 3. The current track or artist is bookmarked on the currently connected device. 2. Press the Station List button. 2-46 PART 2. AUDIO FEATURES PART 3 PHONE FEATURES PART 3 PHONE FEATURES Using your Bluetooth wireless technology Handsfree system Welcome to KIAs connected world of wireless personal networking. The UVO system with Bluetooth wireless technology allows you to safely and conveniently use various Bluetooth wireless technology enabled phone features as you drive your vehicle. The Bluetooth wireless technology handsfree system offers:

Pairing mobile phones (Up to 5 phones) Connecting/disconnecting mobile phones Making/Answering phone calls Downloading Contacts Downloading Call history lists Playing music saved in a Bluetooth wireless technology enabled phone in the vehicle 3-2 PART 3. PHONE FEATURES Smart driving practices Check related laws and regulations on using mobile devices and their accesso-

ries and always make sure to obey them. The use of such devices may be prohibited or restricted in certain areas. Your mobile device lets you communicate through voice and data almost anywhere and anytime. When driving a car, driving comes first. If you choose to use your mobile device while driving, remember the following:

Place your mobile device in easy reach. Be able to access your mobile device with-

out removing your eyes from the road. Do not search for phone numbers while driving. Searching through your address book may be distracting takes attention away from driving safely. Let the other person know you are driv-

ing; when necessary, suspend the call in heavy traffic or inclement weather. Rain, sleet, snow, ice or heavy traffic may increase the risks of driving. Warning Driving while distracted can result in a loss of vehicle control that may lead to an acci-

dent, severe personal injury, and death. The drivers primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equip-

ment, or vehicle systems which take the drivers eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle. Some laws do not allow the use of hand-

Use your mobile device to call for help. P H O N E F E A T U R E S Dial 911 or other local emergency number in case of fire, traffic accident, or medical emergencies. held devices while driving. Always obey local laws and, even if permit-

ted, do not use your handheld device unless it is safe to do so. Get to know your mobile device and features. Knowledge of your mobile device and its fea-

tures will help you to use the features more easily. PART 3. PHONE FEATURES 3-3 PART 3 PHONE FEATURES Pairing your handset device to the handsfree system Pairing a Bluetooth wireless technology enabled device for the first time Before you can use the Bluetooth wireless technology handsfree system to make hands-

free calls, you must create a Bluetooth wire-

less technology connection between your handsfree system and handset device. A Bluetooth wireless technology connection is made between your handsfree system and handset device with a paired link. After setting up a paired link, the handsfree system will always remember your handset device. Once the system is paired with the device, your hand-free system can be set so that it automatically connects to your handset each time you start your vehicle. Caution For safety, make pairings between your handsfree system and handset only while the vehicle is parked. 3-4 PART 3. PHONE FEATURES 1. Press the button on the steering wheel or the PHONE key on the control panel. Non SSP(Secure Simple Pairing) sup-

ported device 4. Once the device is discovered, input the passkey in the handset device. button. 2. Press the Yes 3. Perform a device discovery from the handset device. For details on device dis-

covery for your handset device, refer to the handset device user's manual. SSP(Secure Simple Pairing) supported device 4. Once the device is discovered, check the passkey on your handset device and confirm. 5 handsets have already been paired, you must delete a handset in order to pair a new handset. Some phones (i.e., iPhone , Android and Blackberry phones) may offer an option to allow acceptance of all future Bluetooth connection requests by default. Visit http://www.kia.com/#/bluetooth for additional information on pairing your Bluetooth enabled mobile phone, and to view a phone compatibility list. Deleting a paired handset device 1. While in Phone mode, press the Connections button. P H O N E F E A T U R E S 2. Select the handset device you want to delete. PART 3. PHONE FEATURES 3-5 5. Once pairing is complete, the handset device will be shown in the Connections list. Note Initial pairing may require some time due to initial uploading of your contacts into the system. The contacts upload feature may not be supported in some handset devices. Before connecting the Bluetooth wireless tech-

nology handsfree system with the handset device, check to see that the handset device sup-

ports Bluetooth wireless technology handsfree and Bluetooth wireless technology is turned on. The process for initiating Bluetooth wireless tech-

nology connections may vary depending on the manufacturer. Use the handset device user's manual as a reference guide. The UVO system supports up to 5 pairings. After PART 3 PHONE FEATURES Connecting a handset device 3. Press the Connect button. The system automatically connects the Bluetooth wireless technology enabled device set at the highest priority. As a result, in order to connect a different phone, follow the following steps. 1. W h i l e i n P h o n e m o d e, p r e s s t h e Connections button. Note After initial pairing, your highest priority handset device will automatically connect with the handsfree system every time you start your vehicle (if your handset device is powered on and the relevant Bluetooth pri-

ority settings are not changed). 2. Select the handset device you want to connect. 3. Once the phone is selected, press the Delete button. 4. Press the Yes button. Note When you delete a paired phone, data will also be erased. For instance, deleting a paired phone will also erase recent calls, contact lists, and SMS data from the system. 3-6 PART 3. PHONE FEATURES Setting Priority 2. Press the Set Priority button. When more than one device has been paired to the system, you can set the connection pri-

ority so that a certain phone is connected with priority starting from the next time you turn on the system. 3. Select the phone you wish to set as pre-

ferred priority. 1. W h i l e i n P h o n e m o d e, p r e s s t h e Connections button. P H O N E F E A T U R E S PART 3. PHONE FEATURES 3-7 PART 3 PHONE FEATURES Using the phone features 5 Connections Phone Mode Screens and Features Displays the Connections screen. 6 Settings 1. When a mobile phone is connected Displays the Settings screen. 1 4 2 5 3 6 1 Dial Number Displays the Dial Pad screen. 2 Contacts Displays the Contacts list 3 Recent Calls Displays the Recent Calls list. 4 Favorites Up to 20 frequently used contact saved so help your fast call. 3-8 PART 3. PHONE FEATURES 2. When making a call 1 2 3 5 6 4 7 1 Phone Battery charge status Displays the battery charge status of the connected mobile phone. The battery charge status may not be displayed in some mobile phones. 2 Signal Strength Displays the mobile phone signal strength. The signal strength may not be displayed in some mobile phones. 3 Bluetooth wireless technology connection state Becomes displayed when a Bluetooth wireless technology enabled phone has been connected with the car system. 4 Dial Input the phone number through the dial pad. 5 SEND Makes the call to the dialed number. If a number has not been entered into the phone number input window, pressing the send button displays the call history list screen. 6 END Ends the call. If a number has been input-

ted, then erases the entire number. 7 Delete Deletes one digit at a time. 3. When receiving an incoming call 4. When on a call 5 PRIVATE 1 2 1 Accept Accepts the incoming call. 2 Reject Rejects the incoming call. 3 1 5 4 2 6 1 Call state Displays the call state, such as talk time, phone connection, and end time. 2 END Ends the call. 3 Name of the other party Displays the name of the other party. The name of the caller will not be displayed if the caller's phone number has not been saved in contacts. 4 Number of other party Displays the number of the other party When talking on the car handsfree, use this function to switch the call to the mobile phone. 6 MUTE Mutes the sound of the call. The caller will not be able to hear the conversation taking place in the car. P H O N E F E A T U R E S PART 3. PHONE FEATURES 3-9 PART 3 PHONE FEATURES Answering an incoming call Rejecting an incoming call Call waiting Call waiting is a feature which allows you to place the current call on hold in order to receive a second call. When you are in a call, the incoming call window will be dis-

played to the sound of a beep to signal a second incoming call. 1. Press the Reject button on the screen or key on the steering wheel the controller. 1. If a second call is received while already on a call, the incoming call window will be displayed on the screen. 2. The call will be rejected. 2. Press the Accept button or the key on the steering wheel controller to take the second incoming call. Press the Reject button to reject the second incoming call. 1. When there is an incoming call, an incom-

ing call window will be displayed on the screen. Press the Accept button on the screen or the key on the steering wheel controller to answer the call. 2. The call will be connected. Note You can also accept an incoming call using your handset device if you wish to talk in pri-

vate mode. 3-10 PART 3. PHONE FEATURES Placing a call 1. By dialing a number button or the 3. To switch again to the other caller, press the key on the steering wheel. The other call will be received and the previous call will switch back to call waiting. Note The call waiting function may not be sup-

ported in some handset devices. 1. W h i l e i n P h o n e m o d e, p r e s s t h e Dial Number button. 2. Use the dial pad on the right side of the screen to enter the phone number. P H O N E F E A T U R E S 3. Press the button on the screen or key on the steering wheel con-

the troller to connect the call. Note Pressing and holding the button or key will redial the most recent number. You can delete digits by pressing the Delete or button on the screen. The Delete button will delete one digit at a button will erase all time while the digits. When placing international calls, press and hold the * . A + sign is displayed, allow-

ing you to place an international call. PART 3. PHONE FEATURES 3-11 PART 3 PHONE FEATURES 2. By contact list 1. While in Phone mode, press the Contacts button. 3. Press the button on the screen or key on the steering wheel con-

2. Select the contact you want to call from the list. the troller to connect the call. 3. By recent calls 2. Select the contact you want to call from the list. 1. W h i l e i n P h o n e m o d e, p r e s s t h e Recent Calls button. 3-12 PART 3. PHONE FEATURES 3. Press the button on the screen or key on the steering wheel con-

the troller to connect the call. Note If you want to connect to the most recent call button key you made, press and hold the in the 'Dial Number' screen or the on the steering wheel. Recent calls will be deleted automatically when a handset device is disconnected from the system. Recent calls can be sorted. Use the Sort by Dialed , button to sort recent calls by Received and Missed calls. The recent calls function may not be sup-

ported in some handset devices. Contact list 1. Downloading contact list (from mobile phone) You can store a list of names and phone numbers in the system contact list. The contact list can support up to 2,000 entries. The contact list is only available when a handset device is connected to the hands-

free system. In some phones, the system will automatically download contacts upon pairing. 1. While in Phone mode, press the Contacts button. 2. Press the Download button. P H O N E F E A T U R E S 3. The contacts from the currently paired handset device will automatically be downloaded. PART 3. PHONE FEATURES 3-13 PART 3 PHONE FEATURES Note You can search your contacts to conve-

Searching your contacts niently find the desired person. If you have many contacts downloaded in the device from your handset device, you can make searches of your contacts to conve-

niently find the desired person. 1. By name 2. Press the Search button. 1. While in Phone mode, press the Contacts 3. Press the Search by name button. button. 3-14 PART 3. PHONE FEATURES 2. By number 4. Enter the name you wish to find and press the Done button. 3. Press the Search by number button. 1. While in Phone mode, press the Contacts button. P H O N E F E A T U R E S 5. Press the contact you want to connect the call. Note When searching contacts by name, you do not need to enter the entire name to conduct the search. 2. Press the Search button. call. 4. Enter the number you wish to find and press the Done button. 5. Press the contact you want to connect the Note When searching contacts by number, you do not need to enter the entire number to con-

duct the search. PART 3. PHONE FEATURES 3-15 PART 3 PHONE FEATURES Checking missed calls 3. Press the Missed button. 1. W h i l e i n P h o n e m o d e, p r e s s t h e Recent Calls button. 4. The list of missed calls will be displayed. 2. Press the Sort by button. 3-16 PART 3. PHONE FEATURES Favorites 1. Placing a call by favorites 1. While in Phone mode, press the Favorites button. 2. Select the contact you want to call from the list. Note To save a favorite, contacts should first be downloaded. Contact saved in Favorites are not automati-

cally changed even if the information was changed in the mobile phone. In this case, delete it and save the new information. 2. Adding favorites the list. 2. Select the contact you want to add from 1. While in Favorites screen, press the 3. Press the button to add favorite. Add button. 3. Deleting favorites 1. While in Favorites screen, press the Edit button. P H O N E F E A T U R E S 2. Select the contact you want to delete from the list. 3. Press the Delete button. PART 3. PHONE FEATURES 3-17 PART 3 PHONE FEATURES SMS 1. Downloading SMS messages (from mobile phone) When a mobile phone is paired with the system, unread messages will automatically be downloaded to the system. While you will not be able to check SMS messages through the system due to legal regulations, the system will read back messages for you for added convenience. The SMS read back is also possible when the vehicle is in motion. 2. Checking an SMS message 1. Press the key on the steering wheel. 2. Say the command Read SMS. 3. The system will read back the new message. Note To listen to the message again, say Read again. To listen to the next message, say Next. To send a reply, say Reply. To call the sender, say Call. 3-18 PART 3. PHONE FEATURES When a mobile phone has been paired with the system, new incoming messages will automatically be notified through the system. 3. Select the desired message to send a response. Note You can modify custom messages through Phone Settings. The SMS function may not be supported in some handset devices. 4. Editing Custom Messages 1. In the Phone Screen, press the Settings button. When the notification window is displayed, button to check the new press the Yes incoming message. 2. Press the Edit button next to the Custom Messages menu. 3. From the 6 messages, select the mes-

3. Sending an SMS message (Custom Messages) The UVO system allows you to respond to i n c o m i n g m e s s ag e s t hr o u g h vo i c e commands. 1. After listening to a received message, say Reply. 2. The UVO system will provide information pertaining to the 6 Custom Messages. sage you wish to edit. Caution The Editing Custom Messages feature is supported only when the vehicle is parked. If you need to edit custom messages, first park your vehicle in a safe location. Switching the call 1. Switching the call between handsfree and handset device When you receive an incoming call, you have the option of using the handsfree or talking privately by using the handset device. 2. Transferring the handsfree call to your Handset device 1. After pressing the Accept button for an incoming call, the following screen will be displayed. Note Accepting a call with the handset device will automatically connect the call in Private mode. 3. Transferring a call on your Handset device to handsfree 1. If an incoming call is accepted with the handset device, the call will be connected with the handset device while the UVO system will display the following screen. 2. Press the Use handsfree button to transfer the call to the handsfree. P H O N E F E A T U R E S 2. Press the Private button. The call will be transferred to the handset device. PART 3. PHONE FEATURES 3-19 PART 3 PHONE FEATURES Phone settings Setting Phone Volume 1. Press the PHONE key. 2. Press the Settings button. Turn Streaming Audio On and Off Streaming Audio is a feature which turns On/

Off BT Audio Mode. For more information on BT Audio, refer to the BT AUDIO MODE section in the Audio Features chapter of the user's manual. Note Press the Default button to restore the default setting. Although the call volume can be changed during a call, the volume will return to its ini-

tial level as saved in Setup. Call volume can be operated separately from the audio volume, allowing you to change the call volume without changing the audio volume. When call volume is changed, ring volume is also changed. 1. While in Phone Settings, press the Settings button. 3. Use the , buttons to control the volume to the desired level. 3-20 PART 3. PHONE FEATURES Contacts Sync Contacts Sync is a feature which automati-

cally downloads contacts when pairing a new phone. 2. Press the On or Off button next to the Streaming Audio menu. Note Press the Default button to restore the default setting. Changes are saved as they are made. In other words, Once you change a setting, the new setting will be saved. 1. While in Phone Settings, press the Settings button. Note Press the Default button to restore the default setting. Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. If Contacts Sync is set to ON, contacts stored in your phone will download each time your phone is connected. There may be a delay before the system is available to place a call. If Contacts Sync is set to OFF, your phone contacts will download only at the initial pair-

ing. This allows you to make calls without waiting for your phone contact list to download. P H O N E F E A T U R E S 2. Press the Off to the Contacts Sync menu. On or button next PART 3. PHONE FEATURES 3-21 PART 3 PHONE FEATURES SMS This feature allows you turn the SMS feature on or off within the system. When turned on, the SMS feature will download unread incoming messages to provide a read back of new messages. Changing passkey The passkey is the authentication code needed whenever you pair a new handset device. 2. Press the On or Off button next to the SMS menu. Note Press the Default button to restore the default setting. Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. 1. While in Phone Settings, press the Settings button. 1. While in Phone Settings, press the Settings button. 3-22 PART 3. PHONE FEATURES 2. Press the 0000 button next to the pass-

key menu. Note Mobile Phone Compatibility Depending on the manufacturer, product and product specification, some mobile phones func-

tions may not be supported or may not operate to specification. Carefully read the cautions listed below. The occurrence of problems upon using mobile phones may be caused by the mobile phone 3. Input the new passkey and press the and not by the Audio unit. Done button to save. Note

The default passkey is 0000 .

The passkey can be set only when the vehi-

Even mobile phones which support Bluetooth wireless technology function may not operate properly if the mobile phone connection has been locked. Release the connection lock and try connecting the mobile phone with the system again. The mobile phone battery icon and signal strength icon may not be properly displayed depend-

ing on the type of mobile phone. cle is parked. Call waiting is supported only when connected mobile phones support this feature. The call P H O N E F E A T U R E S waiting pop-up may not be displayed in some mobile phones. Audio streaming mode will operate only when a Bluetooth wireless technology enabled phone has been connected. Connecting or disconnecting a Bluetooth wireless technology enabled phone while audio streaming is operating will stop music play. The audio streaming function may not be supported in some mobile phones. The phonebook may take a prolonged period of time to download or may not operate in some mobile phones. The quality of Bluetooth wireless technology handsfree calls may differ depending on the mobile phone. SMS read back function may not be supported in some handset devices. PART 3. PHONE FEATURES 3-23 3-24 PART 3. PHONE FEATURES PART 4 VOICE COMMANDS  Do not use abbreviations (i.e., use Lieutenant instead of Lt.) or acronyms

(i.e., use County Finance Department instead of C. F. D.. Be sure to say the name exactly as it is entered in the contacts list. PART 4 VOICE COMMANDS Conditions for voice command system The voice control system includes a special handsfree microphone mounted above the driver's seat of your car which filters out ambient noise and allows you to operate system features through voice commands while maintaining proper posture. There are still a few points you should observe to make sure that you are properly understood.

Keep doors, windows and the sunroof closed to avoid noise interference from o u t s i d e t h e c a r . V o i c e c o m m a n d performance can be improved if the cabin environment is quiet.

 Press the voice recognition button and say the voice command after the sound of the beep.

 Speak continuously and at normal volume, avoiding unnatural emphasis and pauses between words 4-2 PART 4. VOICE COMMANDS

Avoid causing background noise in the car while you are speaking, and ask your passengers not to speak while you are giving voice commands.

 As the handsfree microphone is positioned to pick up the driver's voice, commands by other occupants may be understood with less accuracy, and passengers are advised to use the handset when making calls. The Kia Voice Recognition System may have difficulty understanding some accents or uncommon names. When using Voice Recognition to place a call, speak in a moderate tone, with clear pronunciation To maximize the use of Voice Recognition, consider these guidelines when storing contacts:

 Do not store single-name entries (e.g., Bob, Mom, etc.). Instead, always use full names (including first and last names) for these contacts

 Do not use special characters (e.g., @, -,

*, &, etc.) Operating Voice Command Using Voice Command Note

Press the key shortly to interrupt the system command feedback and enter a voice command.

To terminate the voice control system, either key for over 0.8 say Exit or press the second.

The system voice comment Please say a command after the beep will not be stated when the Command Feedback option is turned off.

For more information on the various voice commands supported by the system, refer to the Command Help or the Voice Command List section. Voice Command Help The Voice Command Help section provides you with lists of commands that can be used in each mode, adding ease and convenience using voice commands. 1. Press the Voice button. 1. Press the key on the steering wheel controller. A display will be shown at the top of the screen followed by a Please say a command after the beep system comment. 2. Once the icon becomes displayed, say the desired voice command

(ex: What's Playing) 2. Press the Help button. PART 4. VOICE COMMANDS 4-3 I V O C E C O M M A N D S PART 4 VOICE COMMANDS Turning Command Feedback On and Off Note

Press the Default button to restore the default setting.

Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. 3. Press the mode to view a list of related Voice Commands. Note The help command can be used even while voice recognition dialogue is operating. At such time, help instructions appropriate to the state of the dialogue will be provided. 1. Press the Voice button. 2. Press the On or Off button next to the Command Feedback menu. 4-4 PART 4. VOICE COMMANDS Adjusting Voice Command Volume Note Press the Default button to restore the default setting. Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. 1. Press the Voice button. 2. Use the , buttons to adjust the voice command volume. 3. Press the button to return to the Setup screen. PART 4. VOICE COMMANDS 4-5 I V O C E C O M M A N D S PART 4 VOICE COMMANDS Speaker Adaptation Creating a Voice Profile The Voice Command feature in the UVO system allows you to create speaker profiles in order to help increase voice recognition accuracy. You will be asked to read a number of sentences to the system so that it can adapt to y o u r v o i c e . C r e a t i n g a p r o f i l e t a k e s approximately several minutes and must be done while the vehicle is parked. You can quit/

resume a reading session, but the system cannot be interrupted while it is creating the profile. 1. Press the Voice button. 4-6 PART 4. VOICE COMMANDS 2. Press the Default button next to the 4. Input the name of the profile you wish to Speaker Adaptation menu. use and press the Done button. 3. After reading the instructions, press the 5. Follow the training set as shown on the Start button. screen. Selecting a Previous Voice Profile 6. As each of the 10 commands become displayed on the screen, press the key then read the displayed sentence in your natural tone. Note

There are 10 commands in the training set. For each one, press the speak button and read the command on the screen. 1. Press the Voice button. 3. Press the name of the profile. Note

Press the None(Default) button to restore the default profile.

Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. 2. Press the profile name button next to the Speaker Adaptation menu. PART 4. VOICE COMMANDS 4-7 I V O C E C O M M A N D S PART 4 VOICE COMMANDS Deleting a Voice Profile 1. Press the Voice button. 3. Press the Delete button next to the name of the profile. Note

Press the None(Default) button to restore the default profile.

Changes are saved as they are made. In other words, once you change a setting, the new setting will become saved. 2. Press the profile name button next to the Speaker Adaptation menu. 4. Press the Yes button. 4-8 PART 4. VOICE COMMANDS Voice Command List Command List - General Commands The voice commands for this system are divided into Global commands and Local commands. Global commands () : Commands that operate in all modes. Local commands () : Commands that operate only in corresponding modes or when screens of corresponding modes are displayed. Command Operation Exit / Quit / Cancel Go back Repeat Help Voice command feedback {on, off}

Tutorial Terminate the voice control system Returns to the previous step. Repeats the system prompt. Provides instruction on the voice command necessary for the current situation. Turns command feedback on/off. Provides guidance on how to use voice recognition and Bluetooth connections PART 4. VOICE COMMANDS 4-9 I V O C E C O M M A N D S PART 4 VOICE COMMANDS Command List - Audio Commands 1. FM/AM Radio Command Radio Radio {FM, AM}

Radio {87.5 - 107.9} FM Radio {530 - 1710} AM Radio FM preset {1 - 12}

Radio AM preset {1 - 6}

What's playing?

2. SIRIUSTM Command SIRIUSTM SIRIUSTM preset {1 - 18}

SIRIUSTM channel {0 - 223}

SIRIUSTM channel {name}

SIRIUSTM category {name}

What's playing?

4-10 PART 4. VOICE COMMANDS Operation Plays the most recent frequency for the most recent band Plays the most recent frequency for the corresponding Band. Plays the selected FM band frequency. Plays the selected AM band frequency. Plays the selected FM preset. Plays the selected AM preset. Reads back HD RadioTM(Optional) station information. Operation Plays the most recent SIRIUSTM channel. Plays the selected SIRIUSTM preset. Plays the selected SIRIUSTM channel. Plays the channel searched through the SIRIUSTM channel name. Plays the channel searched through the SIRIUSTM category name. Reads back SIRIUSTM channel information. 3. MEDIA Command Play {zune, iPod, USB, CD}

Play {Bluetooth audio, AUX}

Play artist {artist name}

Play album {album name}

Play track {track name}

Play playlist {playlist name}

Play genre {genre}

Play audiobook {title}

Play podcast {podcast}

Play composer {composer}

What's playing?

Repeat {on, off}

Shuffle {on, off}

Play {CD, zune, iPod, USB} artist {name}

Play {CD, zune, iPod, USB} album {name}

Play {CD, zune, iPod, USB} track {name}

Play {CD, zune, iPod, USB} playlist {name}

Play {CD, zune, iPod, USB} genre {genre}

Play {CD, zune, iPod, USB} composer {name}

Play iPod audiobook {title}

Play iPod podcast {podcast}

Operation Plays the selected media mode. Plays the selected media mode. Plays songs of the selected artist. Plays songs of the selected album. Plays the selected track. Plays songs of the selected playlist. Plays songs of the selected genre

(iPod only) Plays the selected audiobook.

(iPod only) Plays the selected iPod podcast. Plays songs for the selected composer. Reads back the current song information. Turns the repeat feature on or off. Turns the shuffle feature on or off. Plays songs for the selected artist in the selected media mode. Plays songs for the selected album in the selected media mode. Plays the selected track in the selected media mode. Plays the selected playlist in the selected media mode. Plays songs for the selected genre in the selected media mode. Plays songs for the selected composer in the selected media mode.

(iPod only) Plays the selected iPod audiobook.

(iPod only) Plays the selected iPod podcast. PART 4. VOICE COMMANDS 4-11 I V O C E C O M M A N D S PART 4 VOICE COMMANDS 4. JUKEBOX Command Play JUKEBOX Play JUKEBOX Favorites Play artist {artist name}

Play album {album name}

Play track {track name}

Play playlist {playlist name}

Play genre {genre}

Play composer {composer}

What's playing?

Add to favorites Remove from favorites Repeat {on, off}

Shuffle {on, off}

Play JUKEBOX artist {artist name}

Play JUKEBOX album {album name}

Play JUKEBOX track {track name}

Play JUKEBOX playlist {name}

Play JUKEBOX genre {genre}

Play JUKEBOX composer {name}

4-12 PART 4. VOICE COMMANDS Operation Plays the JUKEBOX mode. Plays songs of JUKEBOX Favorites Plays songs of the selected artist Plays songs of the selected album. Plays the selected track. Plays songs of the selected playlist. Plays songs of the selected genre Plays songs of the selected composer. Reads back the current song information. Adds the current song to favorites. Removes the current song from favorites. Turns the repeat feature on or off. Turns the shuffle feature on or off. Plays songs of the selected JUKEBOX artist. Plays songs of the selected JUKEBOX album. Plays the selected JUKEBOX track. Plays the selected JUKEBOX playlist. Plays songs of the selected JUKEBOX genre. Plays songs of the selected JUKEBOX composer. 5. PANDORA Radio Command Play PANDORA Play PANDORA Station {station name}

Shuffle Skip Thumbs Up Thumbs Down Bookmark this track Bookmark this artist Whats playing Operation Plays the PANDORA Radio mode Plays the station searched through the PANDORA Radio station name. Turns the shuffle feature on Moves to the next song. Approves the song and keep it in your playlist. Disapproves the song and prevents that song from playing again. The current track is bookmarked on the currently connected device. The current artist is bookmarked on the currently connected device. Reads back the current song information. Command List - UVO eServices Commands Command Operation eServices Roadside Assist eServices Guide Vehicle Diagnostics Displays UVO eServices mode. Makes call to Roadside Assist agent. Receive guidance on methods of using UVO eServices. Starts the Vehicle Diagnostics process. PART 4. VOICE COMMANDS 4-13 I V O C E C O M M A N D S PART 4 VOICE COMMANDS Command List - Phone Commands Command Operation Calls the desired name. Dials the desired number. Calls the desired person at the home number. Calls the desires person at the office number. Calls the desires person on the mobile number. Starts dial by number operation. Starts call by name operation. Turns on Phone mode screen. Starts international call operation. Turns on Phone connections screen. Turns on Phone settings screen. Reads back new SMS message for Bluetooth wireless technology SMS capable phones. Reads back new SMS message for Bluetooth wireless technology SMS capable phones. Turns on Recent Calls list screen. Calls the last dialed call. Call {name}

Dial {number}

Call {name} at home Call {name} at office Call {name} on mobile Dial by number Call a contact Phone Dial international Phone connections Phone settings SMS Read SMS Recent calls Redial 4-14 PART 4. VOICE COMMANDS PART 5. UVO eServices PART 5 UVO eServices The Crash Notification Assist feature may not operate in the following situations. When the vehicle ignition is not turned on When the system power supply is unstable When the attempted call is blocked due to user operations When the 9-1-1 call is unstable due to phone or other commu-

nication network issues When the call feature is not operating due to phone settings set by the user When the phone cannot be controlled via Bluetooth due to phone specifications or characteristics When the phone Bluetooth feature is set to off When the phone Bluetooth cannot be connected or becomes disconnected When there are no phones paired with the vehicle When cellular service is unavailable When the power turns off due to phone power (battery) issues When a Bluetooth device without phone feature support has been connected, such as an MP3 device When the system is booting 5-2 PART 5. UVO eServices Using UVO eServices and Cautions Download the UVO eServices App and install it on your smart-

phone. The app can be downloaded from your smartphone's app store. Pair and connect your smartphone with the vehicle. For infor-

mation on connecting your Bluetooth device, refer to the smart-

phone user's manual and instructions on the Phone Help screen on your radio. Up to 5 Bluetooth devices can be paired with the vehicle. Login and activate the UVO eServices App on your smart-

phone. UVO eServices is fully compatible within some smartphones but may not operate properly within incompatible smartphones. To view the list of compatible smartphones, please visit MyUVO.com. Communication between the vehicle and smartphone app may temporarily disconnect depending on the phone state. If the feature is not operating properly, you may need to reset the UVO eServices App or the smartphone to try again accord-

ing to the following steps. 1. Try again 3. Re-connect BT 5. Delete BT and pair again 2. Reset smartphone app 4. Reset smartphone Some services use the customers mobile phone data plan for data communication. and thus the features will function in accordance with the cellular plan. Use of the most up-to-date app version is recommended. For smartphone related inquiries, please visit MyUVO.com. PART 5. UVO eServices 5-3 U V O e S e r v c e s i PART 5 UVO eServices About UVO eServices UVO eServices provides the following features through Bluetooth wire-

less technology communication between the the vehicle and your Smartphone. At launch, the Apple iPhone will be the only UVO eServices compatible device. iPhone is a registered trademark of Apple Inc. Apple iOS6 compatibility expected early 2013. Additional compatible devices expected late 2013. 1 2 3 4 5 5-4 PART 5. UVO eServices Name Roadside Assist Vehicle Diagnostics Parking Minder eServices Guide Crash Notification Assist Details If a diagnostic issue exists, you can connect with a Roadside Assist agent. Informs you if a diagnostic issue is found in your vehicle. If an issue is found, you can contact a call center through Roadside Assistance or reserve an appointment with your preferred Kia dealer through Schedule Service. Save the location of your parked vehicle on your UVO eServices app. You can check where your vehicle is parked through the UVO eServices App on your smartphone. Receive guidance on how to use UVO eServices. If an airbag deploys, your vehicle can automatically initiate a call to 9-1-1 and sends your vehicles location information to the 9-1-1 Operator. Vehicle Diagnostics do not take the place of regularly scheduled maintenance. Feature checks powertrain, chassis, and airbag systems only. For factory-recommended maintenance schedule, see the Maintenance Feature of UVO eServices or the Owners Manual. 911 Connect activates after an airbag deployment. Feature requires a connected mobile phone via Bluetooth. Dependant on cellular service coverage. To use UVO eServices, the following conditions must be met. 1. The UVO eServices smartphone app must be installed and you must log in using your MyUVO account credentials. 2. The smartphone must be connected via Bluetooth wireless technology. 3. Once this is complete, eServices must be activated (from the eServices Settings screen). Driving while drowsy or distracted is dangerous and should be avoided. Drivers should remain attentive to driving and exercise caution when using vehicle systems while driving. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. A Bluetooth enabled cell phone is required to use Bluetooth wireless technology. 24-hour Roadside Assistance is a service plan provided by Kia Motors America, Inc. Certain limitations apply. Coverage details are available in the Kia Warranty and Consumer Information Manual. For access to Enhanced Roadside Assistance, a connected mobile phone via Bluetooth within the cellular service coverage area is required. PART 5. UVO eServices 5-5 U V O e S e r v c e s i PART 5 UVO eServices Before using UVO eServices Connecting Bluetooth wireless technology Installing the UVO eServices App on your Smartphone 1. Download and install the UVO eServices App on your smartphone. The app can be downloaded from your smartphone App Store. 2. Register your vehicle and account at 1. Press the PHONE key on the UVO eSer-

MyUVO.com. Note: MyUVO.com is accessible from your smartphone's browser. 3. Start the UVO eServices App on your smartphone and log in. Download and install the UVO eServices App on your smartphone. 5-6 PART 5. UVO eServices vices system. 2. Press the Connections icon on the touch screen. 3. Press the Add Device button to display the Add Device screen. 4. Turn on the Bluetooth wireless technol-

ogy feature on your smar tphones Bluetooth settings screen. 5. Wait for KIA MOTORS to appear on your smartphones Bluetooth settings screen. 6. Select KIA MOTORS from your phone and enter the passkey shown on the touch screen. The default passkey is 0000. Note

To learn more about Bluetooth wireless technology features, refer to the PART 3 PHONE section. Activating UVO eServices 3. Press the Activate button on the touch tion process will begin. screen. 1. Press the eServices key. 2. Press the Settings icon on the touch screen. 4. After reading the UVO eServices terms of use displayed on the touch screen, press the Activate button. Before pressing the Activate button, ensure that you are running UVO eServices app on your smartphone and are logged in. 6. Once UVO eServices activation is com-

plete, UVO eServices activated will be displayed at the bottom of the UVO eServices main screen. 5. After pressing the Activate button on the touch screen, the UVO eServices activa-

PART 5. UVO eServices 5-7 U V O e S e r v c e s i PART 5 UVO eServices Vehicle Diagnostics Conducting Vehicle Diagnostics Vehicle Diagnostics is available only when the ignition is turned on and the vehicle is parked. It also requires that UVO eServices is acti-

vated, and the Phone is connected through Bluetooth wireless technology before starting Vehicle Diagnostics. 1. Press the eServices key. 2. Press the Vehicle Diagnostics icon on the touch screen. 5. If diagnostic issues are found, press the button to speak to a road-

Roadside Assist side assistance operator or press the Schedule Service button to schedule an appointment with your preferred or nearby Kia dealer. 3. The Vehicle Diagnostics process will begin. When a diagnostics check is in progress, keep the vehicle in park with the ignition on. To cancel diagnostics, press the Cancel button on the touch screen or any key. 6. When scheduling an appointment using the Schedule Service button, pressing the button will allow you to Preferred Dealer request an appointment with your pre-

ferred Kia dealer and send your vehicles diagnostics information. Pressing the Nearest Dealer button will allow you to request an appointment with the nearest Kia dealer and your vehicles diagnostics information. 5-8 PART 5. UVO eServices 4. Once vehicle diagnostics is complete, the diagnostic results are displayed on the screen. 7. Even if diagnostic issues are not found after Vehicle Diagnostics, it is recom-

mended that you send the diagnostic results to your MyUVO account. Press the Send Data button to send the diagnostics results to your MyUVO account. Scheduled Diagnostics Conducting Auto Diagnostics If you have set up Scheduled Diagnostics on your UVO eServices app, a vehicle diagnos-

tics check will automatically start on the day you selected. 1. On the day of the Scheduled Diagnostics, the following window will be displayed. If a critical diagnostics issue with your vehi-

cles powertrain is detected, you will be noti-

fied on your vehicles touch screen. 2. Press the Yes button on the touch screen to proceed with a diagnostics check. PART 5. UVO eServices 5-9 U V O e S e r v c e s i PART 5 UVO eServices Parking Minder Sending Parking Location The location where your vehicle is currently parked can be sent to your smartphone. The Parking Minder feature is only available when the ignition is turned on and the vehicle is parked. Ensure that the UVO eServices system is acti-

vated and the Phone is connected via Bluetooth wireless technology with the UVO eServices app running on your smartphone before using this feature. 1. After parking the vehicle, press the eServices key. 5-10 PART 5. UVO eServices 2. Press the Parking Minder icon on the touch screen to send the vehicles location to your smartphone. Note

When the parking location is being sent, do not drive the vehicle or turn off the ignition. 3. Once the parking location has been sent, you can view your vehicles location from t h e U VO e S e r v i c e s a p p o n y o u r smartphone. Roadside Assist If a diagnostics issue is found, you can con-

nect with a Roadside Assist agent. Enhanced Roadside Assistance feature can be used only when your phone is connected via Bluetooth wireless technology. 1. Press the eServices key. 2. Press the Roadside Assist icon on the touch screen to connect with a Roadside Assist agent. PART 5. UVO eServices 5-11 U V O e S e r v c e s i PART 5 UVO eServices eServices Guide eServices Guide provides guidance on how to use UVO eServices. This feature is only available when the mobile phone is connected via Bluetooth wireless technology. 1. Press the eServices key. 2. Press the eServices Guide icon to receive guidance on how to use UVO eServices. 5-12 PART 5. UVO eServices Crash Notification Assist If an airbag deploys, your vehicle can auto-

matically initiate a call to 9-1-1 and will read your vehicle's location ifnormation to the 9-1-1 Operator. The Crash Notification Assist feature is avail-

able only when the mobile phone is connected via Bluetooth wireless technology. By default, this feature is turned off. To turn it on, you must turn it on in the eServices Settings menu. By enabling this feature, you are agree-

ing the Crash Notification Assist terms of use. An icon is displayed at the top of the touch s c re e n a s s h ow n b e l ow w h e n Cr a s h Notification Assist is enabled and a mobile phone is connected via Bluetooth wireless technology. Making a 9-1-1 Call 1. If an airbag deploys due to an accident, the following screen is displayed and a call is automatically placed to 9-1-1 after 10 seconds. Note

For more information on setting the Crash Notification Assist feature, refer to Crash Notification Assist Setting. 4. If the 9-1-1 Operator attempts to call the driver again, the following icon is dis-

played and allows the driver to speak with the 9-1-1 Operator. 2. Once a call is connected with a 9-1-1 Operator, it is possible to request emer-

gency services to be dispatched to your location. 3. The 9-1-1 Operator may request informa-

tion on the current location of your vehicle. When the 9-1-1 Operator requests your vehicle location, the following icon is dis-

played on the screen and the vehicle loca-

tion is automatically sent to the 9-1-1 Operator. PART 5. UVO eServices 5-13 U V O e S e r v c e s i PART 5 UVO eServices UVO eServices Settings Within the eServices Settings screen, UVO eServices related features can be set, such as activating UVO eServices. Warning

For safety reasons, settings can not be adjusted while driving. Park the vehicle in a safe and legal location before making any changes to your Settings. UVO eServices Activation 1. Press the eServices key and then the Settings button on the touch screen. 5-14 PART 5. UVO eServices Crash Notification Assist Setting 2 . If UVO eServices has not yet been acti-

vated, press the Activate button to start the process. Note

For more information on UVO eServices activation, refer to Activating UVO eServices. 1. Press the eServices key and then the Settings button on the touch screen. 2. To enable Crash Notification Assist, ensure that the On button is selected. To disable this feature, ensure the Off button is selected. 3. When enabling this feature, you must first agree to the Crash Notification Assist terms of use. After reading the terms of use, press the button on the touch screen to Agree accept. PART 5. UVO eServices 5-15 U V O e S e r v c e s i 5-16 PART 5. UVO eServices PART 6 Rear Camera Display PART 6 Rear camera display Rear camera display 1. Place the transmission in Reverse R . The UVO system is equipped with a rear camera display. The rear-camera display System uses an exterior camera integrated to the rear of the vehicle that sends video to the UVO system. Regardless of the mode you are in, placing the transmission in Reverse, or "R", will automatically display the rear view camera screen. 6-2 PART 6. Rear camera display Warning Check your surroundings for safety.

The rear-camera display is equipped with an optical lens necessary to acquire a wider field of vision and may result in a display which differs from the actual distance. Always check the rear and left/right directions when driving in reverse. Always check the rear and left/right directions when driving in reverse. The rear-camera display is not a substitute for proper and safe backing-up procedures. The rear-camera display may not display every object behind the vehicle. Always drive safely and use caution when backing up. 2. The rear-camera display will activate. PART 7 Troubleshooting guide PART 7 Troubleshooting guide Troubleshooting guide Before thinking the product has malfunctioned 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. 2. If you are having problems with the device, try the suggestions listed below. 3. If the problems persist, contact your point of purchase or the nearest service center. Problem Function There are small red, blue, or green dots on the screen Because the LCD is manufactured with technology requiring high point density, a pixel deficiency or lighting may occur within 0.01% of total pixels. Has the Switch for the vehicle been turned to [ACC] or [ON]?

Has the SYSTEM been turned OFF?

Has the volume been set to a low level?

Has the volume been set on mute?

The display looking somewhat darker after prolonged periods of use is normal with LCD panels. If the screen is very dark, contact your point of purchase or the nearest service center. Is the position of FAL/BAL sound controls or volume adjusted to only one side?

Is the audio connector jacks fully inserted into the AUX terminal?

The sound or image is not working The sound is not working When the power is turned on, the corners of the screen are dark Sound is working from only one speaker Sound does not work in AUX mode 7-2 PART 7. Troubleshooting guide Troubleshooting Problem Possible Cause The power does not turn on. The fuse is disconnected. The sound does not work. Device is not properly connected. The volume level is set the lowest level. The connector is not properly connected.

The device is currently fast-forwarding, rewinding, scanning, or playing in slow mode. The sound quality is low. The DISC is dirty or scratched.

Vibration is occurring from the position in which the conversion switch has been installed. Solution Replace with a suitable fuse. If the fuse is disconnected again, please contact your point of purchase or service center. Check to see that the device has been properly connected. Adjust the volume level. Check the connection state.

The sound will not work when the device is fast-forwarding, rewinding, scanning, or playing in slow mode.

Wipe off water or dirt from the DISC. Do not use a disc which has been scratched.

The sound may be short-circuited and the image distorted if the device begins to vibrate. The device will return to normal operation once the vibration has stopped. PART 7. Troubleshooting guide 7-3 PART 7 Troubleshooting guide Problem The USB does not work. Possible Cause USB memory is damaged. USB memory has been contaminated.

A separately purchased USB HUB is being used. A USB extension cable is being used.

A USB which is not a Metal Cover Type USB Memory is being used. A HDD type, CF, SD Memory is being used. There are no music files which can be played. There are no titles which can be played.

The iPod firmware version has not been properly updated.

The iPod device does not recognize downloads. The iPod is not recognized even though it has been connected. Solution

Please use after formatting the USB into FAT 12/16/32 format.

Remove any foreign substances on the contact surface of the USB memory and multimedia terminal.

Directly connect the USB memory with the multimedia terminal on the vehicle.

Directly connect the USB memory with the multimedia terminal on the vehicle. Use a standard USB Memory. Use a standard USB Memory.

Only MP3,WMA file formats are supported. Please use only the supported music file formats. Use iTunes to download and save MP3 files into the iPod. Use iTunes to update the firmware version and reconnect the iPod with the device. Reset the iPod and reconnect with the device. 7-4 PART 7. Troubleshooting guide PART 8 INDEX PART 8 INDEX INDEX A About iPod 2-28 About PANDORA 2-44 About UVO eServices 5-4 About zune 2-32 Activating UVO eServices 5-7 Adding Favorites 2-40, 3-17 Adjusting Voice Command Volume 4-5 Answering an incoming call 3-10 AUDIO CD Mode Screen and Features 2-14 Automatic Brightness Control 1-11 AUX Mode Screen 2-35 B Before Starting PANDORA 2-44 Before thinking the product has malfunctioned 7-2 Bookmark Track or Artist 2-46 BT Mode Screen and Features 2-36 By Artists, Albums, Genres, Song, Composers 2-40 By Artists, Albums, Genres, Songs Composers 2-18 By Artists, Albums, Genres, Songs, Podcasts, 8-2 PART 8. INDEX Composers, Audiobooks 2-30 By contact list 3-12 By dialing a number 3-11 By Folders, Artists, Albums, Genres Songs, Composers 2-25 By name 3-14 By number 3-15 By recent calls 3-12 By Songs, Genres, Albums, Artists, Playlists 2-34 C Call waiting 3-10 Caution  9 Cautions upon handling Audio CDs 2-12 Cautions upon handling MP3 CD 2-16 Cautions upon handling USB MP3 2-21 Changing passkey 3-22 Checking an SMS message 3-18 Checking missed calls 3-16 Checking System Information 2-42 Command List - Audio Commands 4-10 Command List - General Commands 4-9 Command List - Phone Commands 4-14 Commands 4-13 Common Features 2-10 Conditions for voice command system 4-2 Conducting Auto Diagnostics 5-9 Conducting Vehicle Diagnostics 5-8 Connecting a handset device 3-6 Connecting an AUX media device 2-35 Connecting Bluetooth wireless technology 5-6 Connecting your iPod device 2-28 Connecting your USB device 2-23 Connecting your zune device 2-32 Contact list 3-13 Contacts Sync 3-21 Control Panel 1-2 Copying songs from list 2-20 Copying songs from list 2-27 Copying songs into JUKEBOX 2-19, 2-26 Copying the current song 2-19, 2-26 Crash Notification Assist 5-12 Crash Notification Assist Setting 5-14 Creating a Voice Profile 4-6 D Deleting a paired handset device 3-5 Deleting a Voice Profile 4-8 Deleting all files 2-43 Deleting favorites 3-17 Deleting JUKEBOX 2-42 Display Settings 1-11 Downloading contact list

(from mobile phone) 3-13 Downloading SMS messages

(from mobile phone) 3-18 E Editing Custom Messages 3-18 Ejecting a Disc 2-14 eServices Guide 5-12 Explore CD 2-19 Explore USB 2-25 F FADER/BALANCE 1-9 Favorites 3-16 FCC Information  8 FM/AM Mode Screens and Features 2-2 FM/AM Radio 4-10 I Initializing the system 1-8 Inserting a Disc 2-14 Inserting/Ejecting a Disc 2-14 Installing the UVO eServices App on your Smartphone 5-6 iPod Mode Screen and Features 2-29 J JUKEBOX 4-12 JUKEBOX Mode Screen and Features 2-38 Jump 2-11 L Listening to an Audio CD 2-15 Listening to an MP3 CD 2-17 Listening to AUX media 2-35 Listening to HD RadioTM Stations

(Optional) 2-5 Listening to JUKEBOX 2-39 Listening to music from your Bluetooth wireless technology enabled device 2-37 Listening to the FM/AM radio 2-3 Listening to the SIRIUSTM radio 2-6 Listening to USB music 2-24 Listening to your iPod 2-29 Listening to your PANDORA 2-45 Listening to your zune 2-33 M Making a 9-1-1 Call 5-13 Manual Brightness Control 1-11 MEDIA 4-11 MP3 CD Mode Screen and Features 2-17 P Pairing a Bluetooth wireless technology enabled device for the first time 3-4 PANDORA Mode Screen and Features 2-45 PANDORA Radio 4-13 Phone Mode Screens and Features 3-8 Placing a call 3-11 Placing a call by favorites 3-16 Play/Pause 2-10 Playing Favorites 2-41 Precautions upon handling USB 2-22 Preset Scan 2-5 R Rear camera display 6-2 Rejecting an incoming call 3-10 Resetting and Initializing UVO system 1-7 Resetting the system 1-7 REW/FF 2-10 REW/FF a song 2-37 Roadside Assist 5-11 S Safety Symbols  8 Scanning FM/AM broadcast frequencies 2-5 Scheduled Diagnostics 5-9 Searching your contacts 3-14 PART 8 . INDEX 8-3 I N D E X PART 8 INDEX Select Display Language 1-7 Selecting a broadcast frequency 2-3 Selecting a CD track 2-15 Selecting a JUKEBOX song 2-39 Selecting a Previous Voice Profile 4-7 Selecting a SIRIUSTM channel 2-6 Selecting a song 2-37 Selecting an MP3 CD song 2-18 Selecting from MP3 list 2-18 Selecting from the list 2-25, 2-30, 2-33, 2-39 Selecting iPod music 2-30 Selecting PANDORA station 2-46 Selecting through channel search 2-7 Selecting through manual search 2-4, 2-7, 2-15, 2-18, 2-24, 2-30, 2-33, 2-39 Selecting through preset 2-4, 2-7 Selecting through SEEK 2-3, 2-6 Selecting through SIRIUSTM category list 2-8 Selecting through song Up/Down 2-18, 2-24, 2-30, 2-33, 2-39 Selecting through Track Up/Down 2-15 Selecting USB music 2-24 Selecting zune music 2-33 Sending an SMS message (Custom Messages) 3-18 8-4 PART 8. INDEX Sending Parking Location 5-10 Setting Brightness 1-11 Setting Phone Volume 3-20 Setting Priority 3-7 SIRIUSTM 4-10 SIRIUSTM Mode Screen and Features 2-6 Smart driving practices 3-3 SMS 3-18, 3-22 Sound Settings 1-9 Speed Dependent Volume Control 1-10 Steering Wheel 1-4 Storing presets 2-4, 2-9 Switching the call  3-19 Switching the call between handsfree and handset device 3-19 System Power 1-6 T The Crash Notification Assist feature may not operate in the following situations 5-2 TONE 1-10 Touch Screen Beep 1-10 Trademark 2-28, 2-32, 2-44 Transferring a call on your Handset device to handsfree 3-19 Transferring the handsfree call to your Handset device 3-19 Troubleshooting 7-3 Turn Streaming Audio On and Off 3-20 Turn Text Scroll On and Off 1-13 Turning Command Feedback On and Off

4-4 Turning Display On and Off 1-12 Turning System Power Off 1-6 Turning System Power On 1-6 U USB Mode Screen and Features 2-23 Using Repeat 2-11 Using Shuffle 2-11 Using Skip 2-8 Using UVO eServices and Cautions 5-3 Using Voice Command 4-3 Using your Bluetooth wireless technology Handsfree system 3-2 UVO eServices Activation 5-14 V Viewing FM/AM Station information 2-5 Viewing SIRIUSTM channel information 2-9 Viewing song information 2-19, 2-26, 2-31, 2-34 Voice Command Help 4-3 W Warning  9 When a mobile phone is connected 3-8 When making a call 3-8 When on a call 3-9 When receiving an incoming call 3-9 Z zune Mode Screen and Features 2-32 I N D E X PART 8 . INDEX 8-5 8-6 PART 8. INDEX PART 8 . INDEX 8-7 8-8 PART 8. INDEX 2TEND08 UVO SYSTEM QUICK REFERENCE GUIDE UVO SYSTEM USER'S MANUAL Congratulations on the Purchase of your new UVO system!

Your new UVO system allows you to enjoy various audio and multimedia features through the main audio system. For the latest information about this product or other KIA products and accessories, visit http://www.kia.com Please read this manual to get the full benefit of the system. These operating instructions are designed to ensure that you can operate the UVO system in a safe and convenient way. We recommend that this manual be kept in the car so that it will be easier for you to find information in case of an emergency. If you cannot find the information you need in this manual or in the "Troubleshooting" section, your local authorized retailer will be pleased to help you with the system or operations. kia motors recommends the use of only parts and accessories that have been tested and approved by kia motors in terms of function, safety and suitability. iPod iPod is a registered trademark of Apple, Inc. Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by KIA is under license. A Bluetooth enabled cell phone is required to use Bluetooth wireless technology. HD RadioTM Technology HD RadioTM Technology manufactured under license from iBiquity Digital Corp. U.S. and Foreign Patents. HD RadioTM and the HD and HD Radio logos are proprietary trademarks of iBiquity. Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries. zune zune is a registered trademark of Microsoft Corporation in the United States and or other countries. Copyright(c) 2011 kia motors. All Rights Reserved. Warning: The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. Table Of contents Controls and Features .....................................................2 Sound Settings.....................................................................6 Display Settings...................................................................7 Listening to the FM/AM radio ......................................8 Listening to the SIRIUSTM radio ................................10 Listening to an Audio CD..............................................11 Listening to an MP3 CD..................................................12 Listening to USB music...................................................14 Listening to music from your Bluetooth wireless technology enabled device ................................................. 16 Listening to JUKEBOX ............................................................17 Pairing a Bluetooth wireless technology enabled device for the first time...................................................19 Answering an incoming call....................................... 20 Placing a call.........................................................................21 SMS........................................................................................... 23 Operating Voice Command........................................ 24 Voice Command List....................................................... 25 Controls and Features Control Panel 1 2 3 4 5 12 11 10 9 8 6 7 No will be shown if the exterior Amplifier feature is not supported. 1 DISC EJECT Ejects the inserted disc. 2 FM/AM Turns on FM/AM mode. Each press of the FM/AM key will change the band in the order of FM AM FM. 3 SAT Turns on SIRIUSTM mode. 4 MEDIA Turns on MEDIA mode. Each press of the MEDIA key will change the mode in the order of CD USB/

iPod/zune JUKEBOX AUX BT Audio PANDORA CD. 5 POWER/VOLUME Push : Turns Power On/Off. Dial : Turns Volume Up/Down. 2 6 SEEK/TRACK Short (under 0.8 seconds) In FM/AM mode, automatically searches and plays the previous or next frequency. In SIRIUSTM mode, automatically searches and plays the previous or next channel. In MEDIA mode (CD, MP3, USB, iPod, zune, BT AUDIO), plays the previous or next track, song, or file. In PANDORA Radio, PANDORA Radio skip (Seek up). Long (over 0.8 seconds) In FM/AM mode, quickly moves through the frequencies when the button is pressed and held. Once released, automatically searches and plays the previous or next frequency. In SIRIUSTM mode, quickly moves to the previous or next channel. In MEDIA mode (CD, MP3, USB, iPod, zune, BT AUDIO), REW/FF the current track, song, or file. In JUKEBOX mode, REW/FF the current track. 7 CATEGORY 9 SETUP Displays SETUP mode. 10 PHONE Displays Bluetooth wireless technology Phone mode. 11 eServices Displays UVO eServices mode. In SIRIUSTM mode, moves to the previous or next SIRIUSTM category. 12 CLOCK 8 TUNE In FM/AM mode, turn the knob to manually search for frequencies. In SIRIUSTM mode, turn the knob to manually search for channels. Press the knob to receive the selected channel. In MEDIA mode (CD, MP3, USB, iPod, zune), turn the knob to manually search for the previous or next track, song, or file. Press the knob to receive the selected track, song, or file. In PANDORA Radio, s e a r c h e s PANDORA R a d i o stations. In JUKEBOX mode, turn the knob to manually search for the previous or next track. Press the knob to receive the selected track. 3 Controls and Features Steering Wheel 4 3 2 1 6 7 1 SEEK/TRACK Short (under 0.8 seconds) In FM/AM mode, automatically searches and plays the previous or next preset frequency. In SIRIUSTM mode, automatically searches and plays the previous or next preset channel. In MEDIA mode (CD, MP3, USB, iPod, zune, BT AUDIO), plays the previous or next track, song, or file. In PANDORA Radio, PANDORA Radio skip (Seek up). Long (over 0.8 seconds) In FM/AM mode, quickly moves through the frequencies when the button is pressed and held. Once released, automatically searches and plays the previous or next 4 5 frequency. In SIRIUSTM mode, quickly moves to the previous or next channel. In MEDIA mode (CD, MP3, USB, iPod, zune, BT AUDIO), REW/FF the current track, song, or file. In JUKEBOX mode, REW/FF the current track. 2 + VOLUME -

Turns Volume Up/Down. 3 MODE Short (under 0.8 seconds) Changes the mode. Each press will change modes in the order of FM AM SIRIUSTM CD USB/

iPod/ zune JUKEBOX AUX BT Audio PANDORA FM. 7 END (Bluetooth wireless technology Phone) Pressing this key will reject an incoming call. If pressed during a call, the current call will be ended. When a SMS message is received, ignores message. Long (over 0.8 seconds) While the system is off, turn the system on. While the system is on, turn off the system. 4 MUTE Mutes the sound. 5 Voice Command Short (under 0.8 seconds) If Voice recognition is off, turns on Voice recognition. If system is speaking, interrupts speaking and enters listening mode. Long (over 0.8 seconds) If Voice recognition is on, turns off Voice recognition. 6 SEND (Bluetooth wireless technology Phone) Pressing this key will receive an incoming call. If the Audio is on, the Bluetooth wireless technology phone screen will be displayed. When a SMS message is received, reads back message. 5 Sound Settings Sound Settings 2. TONE 1. Press the Tone setting button. 2. Use the , buttons to make adjustments to the Treble, Middle and Bass. Press the button to return to Sound Setup. 3. Touch Screen Beep 1. In Sound Setup, press the On or button next to the Touch Screen Beep menu to turn the feature on or off. Off 4. Speed Dependent Volume Control 1. Press the Off On or button next to the Speed Dependent Volume Control menu to turn the feature on or off. Press the Sound button on the main screen of each audio mode (FM/AM, SIRIUSTM , MEDIA, JUKEBOX) to enter Sound Setup. 1. FADER/BALANCE 1. Press the Fader/Balance setting button. 2. U s e t h e , , , buttons to make adjustments to the sound position. 3. Press the button to return to Sound Setup. Note

.Press the Default button to restore the default setting. 6 Display Settings Display Settings Manual Brightness Control 1. Press the SETUP key on the control panel. 1. Press the buttons. Daylight or Night 2. Use the , buttons to make a d j u s t m e n t s t o t h e d i s p l a y brightness. Turning Display On and Off 2. Press the Display button to enter Display Setup mode. 1. Setting Brightness Automatic Brightness Control When the Display brightness is set to automatic, the brightness will be controlled automatically by assessing the amount of ambient light. 1. Press the Automatic button. 1. Press the Display off button. 2. Press any key on the control panel or steering wheel mounted controls to turn the display back on. 7 Listening to the FM/AM radio frequency by 1 step (FM: 0.2MHz, AM: 10kHz). 2. When you find the desired radio broadcast, stop turning the TUNE knob to listen to the selected frequency. Selecting through preset 1. Press the Presets button. 2. Select the desired preset and press the button to start listening. 2. Storing presets 1. Select the desired radio broadcast. 2. From the preset list, press and hold (over 0.8 seconds) the preset number button to which you wish to save. Listening to the FM/AM radio 1. Press the FM/AM key on the control panel. The most recently played FM/AM radio band will automatically begin playing. 2. Press the FM/AM key to switch to the desired radio band. Note Each press of the FM/AM key will change the band in the order of FM AM FM. 1. Selecting a broadcast frequency Selecting through SEEK TRACK or SEEK Press the SEEK TRACK keys on the control panel for under 0.8 seconds. As SEEK operates, the previous or next radio broadcasts with sufficient reception will automatically be searched and played. Selecting through manual search 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direction. Each click will increase or decrease the 8 3. Listening to HD RadioTM Stations

(Optional) 1. While listening to the radio, the HD Radio TM icon will become displayed if receiving an HD RadioTM broadcast. 2. Press the HD button to change to a different HD RadioTM station. 4. Viewing FM/AM Station information 1. Press the Radio icon. 2. Information about the current station (frequency, station, artist, title) will be displayed. 9 Listening to the SIRIUSTM radio Listening to the SIRIUSTM radio SAT key on the control Press the panel. The most recently played SIRIUSTM channel will automatically begin playing. 1. Selecting a SIRIUSTM channel Selecting through SEEK Press the SEEK TRACK or SEEK TRACK keys on the control panel for under 0.8 seconds. As SEEK operates, the previous or next SIRIUSTM channel will automatically be searched and played. Selecting through manual search 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direction. Each click will display the corresponding channel information. 2. W h e n y o u f i n d t h e d e s i r e d SIRIUS TM channel, press the TUNE knob to listen to the selected channel. Selecting through preset 1. Press the Presets button. 10 2. Select the desired preset and press the button to start listening. Selecting through channel search 1. Press the Search button. The channel search screen will be displayed. 2. Input the desired channel number and press the Done button. To delete entries, press the Delete button. Selecting through SIRIUSTM category list button. 1. Press the List 2. Select the desired channel to start listening or press the Category List button to display the channels in the selected category Listening to an Audio CD Listening to an Audio CD Selecting a CD track 1. Insert a CD or press the MEDIA key on the control panel if the CD has already been inserted. 2. When a track is playing and you wish to pause, press the button next to the progress bar. Press the button to restart the track. ll TRACK or SEEK 1. Selecting through Track Up/Down 1. Press the SEEK TRACK keys on the control panel or the or keys on the steering wheel controller to play the desired track. 2. The previous or next track will begin playing. 2. Selecting through manual search 1. Turn the TUNE knob on the control panel in clockwise or counter-clockwise direction. Each click will display information about the selected track. 2. Press the TUNE knob to play the selected track. 11 Listening to an MP3 CD Listening to an MP3 CD 1. Insert an MP3 CD or press the MEDIA key on the control panel if the CD has already been inserted. 2. Choose the category through which you wish to select the song. MP3 CD mode allows you to select by Playlists, Artists, Albums, Genres, Songs, and Composers. Selecting an MP3 CD song Viewing song information When listening to an MP3 CD song, you can browse through song details and information. 1. Press the SEEK 1. Selecting through song Up/Down TRACK or SEEK TRACK keys on the control panel or the or keys on the steering wheel controller to play the desired track or song. 2. By Artists, Albums, Genres, Songs, Composers 1. Press the Album art icon. 2. The song information (Artist, Title, Album, Genre) for the current MP3 song will be displayed. 3. Press the button to return to the previous screen. 1. Press the Menu button. 12 Copying songs into JUKEBOX 1. Copying the current song The UVO system allows you to copy songs from an MP3 CD into JUKEBOX. 2. Press the Now Playing button. 1. Press the Copy button. 3. Press the Edit button. 2. Once copying is complete, you can listen to stored music in JUKEBOX mode. Copying songs from list Copying MP3 songs from lists allows you to simultaneously select several songs to copy into JUKEBOX. 4. Select the songs you wish to copy. When selected, a will be displayed next to the song. To select all songs in the list, press the Select All button. 5. After selecting the desired songs, press the Copy button. 1. Press the Menu button. 6. Once copying is complete, you can listen to copied music in JUKEBOX mode. 13 Listening to USB music Listening to USB music 1. Connect a USB device or press the MEDIA key on the control panel if a USB device has already been connected. 2. When a song is playing and you wish to pause, press the button next to the progress bar. Press the button to restart the song. ll Selecting USB music TRACK or SEEK 1. Selecting through song Up/Down Press the SEEK TRACK keys on the control panel or the , keys on the steering wheel controller to play the desired song. 2. By Folders, Artists, Albums, Genres, Songs, Composers 1. Press the Menu button. 14 2. Choose the category through which you wish to select a song. USB Mode allows you to select by Playlists, Artists, Albums, Genres, Songs, and Composers. Viewing song information When listening to USB music songs, you can browse through song details and information. 1. Press the Album art icon. 2. The song information(Artist, Title, Album, Genre) for the current USB song will be displayed. Press the button to return to the previous screen. Copying song into JUKEBOX 1. Copying the current song The UVO system allows you to copy songs from your USB device into JUKEBOX. 2. Press the Now Playing button. 1. Press the Copy button. 3. Press the Edit button. 2. Once copying is complete, you can listen to copied music in JUKEBOX mode. 2. Copying songs from list Copying USB music songs from lists allows you to simultaneously select several songs to copy into JUKEBOX. 4. Select the songs you wish to copy. When selected, a will be displayed next to the song. To select all songs in the list, press the Select All button. 5. After selecting the desired songs, press the Copy button. 1. Press the Menu button. 6. Once copying is complete, you can listen to copied music in JUKEBOX mode. 15 Listening to music from your Bluetooth wireless technology enabled device Listening to music from your Bluetooth wireless technology enabled device 1. Pair your Bluetooth wireless technology enabled device to the handsfree system. *For more information on pairing your Bluetooth wireless technology enabled devices, refer to the Pairing a Bluetooth wireless technology enabled device for the first time section. 2. Press the MEDIA key on the control

.If music does not begin playing even after displaying the BT Audio screen, try starting the music directly from the Bluetooth wireless technology enabled device. Selecting a song 1. Press the SEEK TRACK or SEEK TRACK keys on the control panel or the , keys on the steering wheel controller to play the desired song. 2. The previous or next song will panel to turn on BT audio mode. begin playing. 3. When streaming music from your Bluetooth wireless technology enabled device and you wish to pause, press the button next on the screen. Press the button to restart music. ll Note

.File selection may not be supported by some Bluetooth wireless technology enabled devices. Note

.While music saved in the Bluetooth wireless technology enabled device may automatically begin playing after converting to the BT Audio screen, this music player function may not be supported in some Bluetooth wireless technology enabled devices. 16 Listening to JUKEBOX JUKEBOX Mode The UVO system offers you the convenience of allowing you to copy songs from your MP3 CD or USB to the Jukebox mode within the system. For more information on copying songs into JUKEBOX, refer to the Copying songs into JUKEBOX section. Listening to JUKEBOX 1. Press the MEDIA key on the control panel to turn to JUKEBOX mode. 2. The system will automatically restart the most recently played song. Selecting a JUKEBOX song 1. Press the SEEK 1. Selecting through Track Up/Down TRACK or SEEK TRACK keys on the control panel or the or keys on the steering wheel controller to play the desired track. 2. The previous or next song will begin playing. 2. By Artists, Album, Genres, Songs, Composers 1. Press the Menu button. 2. Choose the category through w h i c h y o u w i s h t o s e l e c t . JUKEBOX mode allows you to select by Favorites, Artists, Albums, Genres, Songs, and Composers. 17 Listening to JUKEBOX Adding Favorites Playing Favorites The Favorites feature allows you to create a Favorites list of songs. 1. While playing JUKEBOX, press the Menu button. 1. While listening to JUKEBOX, press the button. 2. The heart icon will be displayed on the screen to signify that the song has been saved in Favorites. 3. To delete a song from Favorites, press the button. 2. In the JUKEBOX Menu screen, press the Favorites button. 3. Press the name of the song from the list. The song will begin playing. 18 Pairing a Bluetooth wireless technology enabled device for the first time Caution

.For your safety, only pair devices to the system when the vehicle is parked. Pairing a Bluetooth wireless technology enabled device for the first time 1. Press the button on the steering wheel or the PHONE key on the control panel. Non SSP(Secure Simple Pairing) supported device 4. Once the device is discovered, input the passkey in the handset device. button. 2. Press the Yes 3. Perform a device discovery from the handset device. For details on device discovery for your handset device, refer to the handset device user's manual. SSP(Secure Simple Pairing) supported device 4. Once the device is discovered, check the passkey on your handset device and confirm. 5. Once pairing is complete, the handset device will be shown in the Connections list. 19 Answering an incoming call Connecting a handset device Answering an incoming call The system automatically connects the Bluetooth wireless technology enabled device set at the highest priority. As a result, in order to connect a different phone, follow the following steps. 1. When there is an incoming call, an incoming call window will be displayed on the screen. Press the Accept button on the screen or the key on the steering wheel controller to answer the call. 1. While in Phone mode, press the 2. The call will be connected. Connections button. Rejecting an incoming call 2. Select the handset device you want to connect. 1. Press the Reject button on the key on the screen or the steering wheel controller. 2. The call will be rejected. 3. Press the Connect button. 20 Placing a call Placing a call 2. By contact list 1. By dialing a number 1. While in Phone mode, press the Contacts button. 1. While in Phone mode, press the Dial Number button. 2. Select the contact you want to call from the list. 3. Press the button on the screen or the key on the steering wheel controller to connect the call. 2. Use the dial pad on the right side of the screen to enter the phone number. 3. Press the button on the screen or the key on the steering wheel controller to connect the call. 21 Placing a call 3. By recent calls By favorites 1. While in Phone mode, press the Recent Calls button. 1 . While in Phone mode, press the Favorites button. 2. Select the contact you want to call 2. Select the contact you want to call from the list. from the list. 3. Press the button on the screen or the key on the steering wheel controller to connect the call. 22 SMS SMS 1. Downloading SMS messages

(from mobile phone) When an SMS enabled mobile phone is paired with the system, unread messages will automatically be downloaded to the system. While you will not be able to check SMS messages through the system due to legal regulations, the system will read back messages for you for added convenience. The SMS read back is also possible when the vehicle is in motion. 2. Checking an SMS message 1. Press the key on the steering wheel. 2. Say the command 'Read SMS'. 3. The system will read back the

.When the notification window is button to displayed, press the Yes check the new incoming message. 3. Sending an SMS message

(Custom Messages) The UVO system allows you to respond to incoming messages through voice commands. 1. After listening to a received message, say Reply. 2. The UVO system will provide information pertaining to the 6 Custom Messages. 3. Select the desired message to new message. send a response. Note

.You can modify custom messages through Phone Settings. The SMS function may not be supported in some handset devices. Note

.To listen to the message again, say Read again. To listen to the next message, say Next. To send a reply, say Reply. To call the sender, say Call. When an SMS enabled mobile phone is paired, new incoming messages will automatically be notified through the system. 23 Operating Voice Command Using Voice Command Voice Command List The voice commands for this system are divided into Global commands and Local commands. Global commands () : Commands that operate in all modes. Local commands () : Commands that operate only in corresponding m o d e s o r w h e n s c r e e n s o f corresponding modes are displayed. 1. Press the key on the steering wheel controller. A display will be shown at the top of the screen followed by a Please say a command after the beep system comment. 2. Once the icon becomes displayed, say the desired voice command (ex:

Whats Playing) Note

.Press the key shortly to interrupt the system command f e e d b a c k a n d e n t e r a v o i c e command. To terminate the voice control system, either say Exit or press the key for over 0.8 second. The system voice comment Please say a command after the beep will not be stated when the Command Feedback option is turned off. .For more information on the various voice commands supported by the s y s t e m , r e f e r t o t h e V o i c e Command List section. 24 Voice Command List Command List - General Commands Command Exit / Quit / Cancel Go back Repeat Help Voice command feedback

{on, off}

Tutorial Operation Terminate the voice control system Returns to the previous step. Repeats the system prompt. Provides instruction on the voice command necessary for the current situation. Turns command feedback on/off. Provides guidance on how to use voice recognition and Bluetooth connections Command List - Audio Commands 1. FM/AM Radio Command Operation Radio Radio {FM, AM}

Radio {87.5 - 107.9} FM Radio {530 - 1710} AM Radio FM preset {1 - 12}

Radio AM preset {1 - 6}

What's playing?

2. SIRIUSTM Plays the most recent frequency for the most recent band Plays the most recent frequency for the corresponding Band. Plays the selected FM band frequency. Plays the selected AM band frequency. Plays the selected FM preset. Plays the selected AM preset. Reads back HD RadioTM(Optional) station information. Command SIRIUSTM SIRIUSTM preset {1 - 18}

SIRIUSTM channel {0 - 223}

SIRIUSTM channel {name}

SIRIUSTM category {name}

What's playing?

Operation Plays the most recent SIRIUSTM channel. Plays the selected SIRIUSTM preset. Plays the selected SIRIUSTM channel. Plays the channel searched through the SIRIUSTM channel name. Plays the channel searched through the SIRIUSTM category name. Reads back SIRIUSTM channel information. 25 Voice Command List Voice Command List 3. MEDIA Command Play {zune, iPod, USB, CD}

Play {Bluetooth audio, AUX}

Play artist {artist name}

Play album {album name}

Play track {track name}

Play playlist {playlist name}

Play genre {genre}

Play audiobook {title}

Play podcast {podcast}

artist {name}

Play composer {composer}

What's playing?

Repeat {on, off}

Shuffle {on, off}

Play {CD, zune, iPod, USB}

Play {CD, zune, iPod, USB}

Play {CD, zune, iPod, USB}

Play {CD, zune, iPod, USB}

Play {CD, zune, iPod, USB}

Play {CD, zune, iPod, USB}

playlist {name}

album {name}

genre {genre}

track {name}

composer {name}

Play iPod audiobook {title}

Play iPod podcast {podcast}

26 Operation Plays the selected media mode. Plays the selected media mode. Plays songs of the selected artist. Plays songs of the selected album. Plays the selected track. Plays songs of the selected playlist. Plays songs of the selected genre

(iPod only) Plays the selected audiobook.

(iPod only) Plays the selected iPod podcast. Plays songs for the selected composer. Reads back the current song information. Turns the repeat feature on or off. Turns the shuffle feature on or off. Plays songs for the selected artist in the selected media mode. Plays songs for the selected album in the selected media mode. Plays the selected track in the selected media mode. Plays the selected playlist in the selected media mode. Plays songs for the selected genre in the selected media mode. Plays songs for the selected composer in the selected media mode.

(iPod only) Plays the selected iPod audiobook.

(iPod only) Plays the selected iPod podcast. 4. JUKEBOX Command Play JUKEBOX Play JUKEBOX Favorites Play artist {artist name}

Play album {album name}

Play track {track name}

Play playlist {playlist name}

Play genre {genre}

Play composer {composer}

What's playing?

Add to favorites Remove from favorites Repeat {on, off}

Shuffle {on, off}

Play JUKEBOX artist

{artist name}

Play JUKEBOX album

{album name}

Play JUKEBOX track

{track name}

Play JUKEBOX playlist

{name}

Play JUKEBOX genre

{genre}

Operation Plays the selected JUKEBOX mode. Plays songs of JUKEBOX Favorites Plays songs of the selected artist Plays songs of the selected album. Plays the selected track. Plays songs of the selected playlist. Plays songs of the selected genre Plays songs of the selected composer. Reads back the current song information. Adds the current song to favorites. Removes the current song from favorites. Turns the repeat feature on or off. Turns the shuffle feature on or off. Plays songs of the selected JUKEBOX artist. Plays songs of the selected JUKEBOX album. Plays the selected JUKEBOX track. Plays the selected JUKEBOX playlist. Plays songs of the selected JUKEBOX genre. Play JUKEBOX composer

{name}

Plays songs of the selected JUKEBOX composer. 27 Voice Command List 5. PANDORA Radio Command Play PANDORA Play PANDORA Station

{stationname}

Operation Calls the desired name. Dials the desired number. Shuffle Skip Calls the desired person at the home number. Calls the desires person at the office number. Thumbs Up Calls the desires person on the mobile number. Thumbs Down Bookmark this track Bookmark this artist Whats playing Starts dial by number operation. Starts call by name operation. Turns on Phone mode screen. Reads back the current song information. Command List - UVO eServices Commands Command eServices Roadside Assist eServices Guide Vehicle Diagnostics Operation Displays UVO eServices mode. Makes call to Roadside Assist agent. Receive guidance on methods of using UVO eServices. Starts the Vehicle Diagnostics process. 28 Command List - Phone Commands Command Call {name}

Dial {number}

Operation Calls the desired name. Dials the desired number. Call {name} at home Calls the desired person at the home number. Call {name} at office Calls the desires person at the office number. Call {name} on mobile Calls the desires person on the mobile number. Dial by number Call a contact Phone Dial international Phone connections Phone settings SMS Read SMS Recent calls Redial Starts dial by number operation. Starts call by name operation. Turns on Phone mode screen. Starts international call operation. Turns on Phone connections screen. Turns on Phone settings screen. Reads back new SMS message for Bluetooth wireless technology SMS capable phones. Reads back new SMS message for Bluetooth wireless technology SMS enabled devices. Turns on Recent Calls list screen. Calls the last dialed call. 29 Appendix Homologation FCC Compliance Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interferencethat may cause undesired operation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Do Not Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment.

Be sure

The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 30 31 32