all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.79 MiB | July 11 2017 / June 05 2018 | |||
1 |
|
Users manual | Users Manual | 3.13 MiB | July 11 2017 / June 05 2018 | |||
1 | Cover Letter(s) | July 11 2017 | ||||||
1 | Cover Letter(s) | July 11 2017 | ||||||
1 | External Photos | July 11 2017 / June 05 2018 | ||||||
1 | Internal Photos | July 11 2017 / June 05 2018 | ||||||
1 | ID Label/Location Info | July 11 2017 | ||||||
1 | RF Exposure Info | July 11 2017 | ||||||
1 | Test Report | July 11 2017 | ||||||
1 | Test Setup Photos | July 11 2017 / June 05 2018 |
1 | User Manual | Users Manual | 2.79 MiB | July 11 2017 / June 05 2018 |
CAR MULTIMEDIA SYSTEM USER'S MANUAL Read the following safety precautions for your safety Notations used within this User's Manual Before using the product, read the contents of this user's manual carefully and use this product safely. WARNING Failure to observe the instructions within this category could result in death or serious injury or damage to the vehicle. The design and speci cations of this product may change without prior noti cation for product and service improvement. The actual features in the vehicle may differ from the illustrations. For more accurate information about the vehicle, please refer to the catalogue. This Audio system contains open source software, including without limitation, software distributed and/or modi ed under the GNU General Public license, Version 2, June 1991, and the GNU lesser General Public License, Version 2.1, February 1999. For additional information and to obtain related materials including without limitation, the previous referred to licenses and software, please contact us at MOBIS_OSSrequest@mobis.co.kr CAUTION Information on matters that could potentially lead to injury or vehicle damage/malfunction Information that could lead to higher user safety i Information Information and tips that provide additional user convenience in using the product NOTICE Information on specific features that facilitate proper product use and functional understanding Information on terminology used within this manual iPod iPod is a registered trademark of Apple Inc. Bluetooth Wireless Technology A compatible Bluetooth Wireless Technology-enabled cell phone is required to use Bluetooth Wireless Technology. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. Other trademarks and trade names are those of their respective owners. A Bluetooth enabled cell phone is required to use Bluetooth Wireless Technology. Bluetooth Wireless Technology phone compatibility can be checked by visiting http://www.kia.com. part.1 Basic Warnings and Cautions Key Product Features Component Names and Functions Starting the System for the First Time Some functions other than the one mentioned above cannot be used while driving. These functions operate only when the vehicle is parked. Basic Safety Warnings Do not stare at the screen while driving. Staring at the screen for prolonged peri-
ods of time could lead to traffic accidents. Do not disassemble, assemble, or modify the Multimedia system. Such acts could result in accidents, fire, or electric shock. Heed caution not to spill water or intro-
duce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction. If you use phone related functions while driving, you will find it difficult to concen-
trate on operating the vehicle and the current traffic conditions, so the possibility of an accident may increase. Please use phone related functions only when parked. 1-2 I Basic Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product mal-
function. Continued use in such con-
ditions could lead to accidents (fires, electric shock) or product malfunctions. Do not touch the antenna during thun-
der or lightening as such acts may lead to lightning induced electric shock. Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents. For most Audio and multimedia modes, the display will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen.(The screen will only operate when the parking brake is ON for man-
ual transmission vehicles and when the parking brake is ON or the gearshift is in the P (PARK) position for automatic.) Safety Cautions Pay attention to traffic conditions while driving. Operating the device while driving could lead to accidents due to a lack of atten-
tion to external surroundings. First park the vehicle before operating the device. In addition, the touch screen may not work for some functions when the vehi-
cle is in motion. The touch screen fea-
ture will be supported once the vehicle has stopped. Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents. Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impair-
ment. (Adjust the volume to a suitable levels before turning off the device.) If you want to change the position of device installation, please inquire with your place of purchase or service main-
tenance center. Technical expertise is required to install or disassemble the device. Turn on the car ignition before using this device. Do not operate the Multimedia system for long periods of time with the ignition turned off as such operations may lead to battery discharge. Upon using the Multimedia system for more than 10 minutes with the car engine turned off, the following warning will be displayed. After 10 minutes, the warning will be displayed for 5 seconds every 1 minute. Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen. When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materi-
als, chemical cloths, or solvents(alcohol, benzene, thinners, etc.) as such mate-
rials may damage the device panel or cause color/quality deterioration. When experiencing product concerns, inquire with your place of purchase or service maintenance center. Prevent caustic solutions such as per-
fume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration. 1 0 Warnings and Cautions I 1-3 Key Product Features This device is a Multimedia system equipped with a multifunc-
tional player that supports Radio (FM, AM), SiriusXM, USB, iPod, AUX, Bluetooth Audio and My Music features. The WIDE VGA LCD provides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment. Miscellaneous Bluetooth Wireless Technology Convenient use of Bluetooth Handsfree by using buttons within the steering wheel control Digital Screen Control Features Easy control of features through touch screen options Steering Wheel Control Control over audio features, voice recognition and Bluetooth through the steering wheel control for maximum convenience Display Wide TFT-LCD Display Provides high quality video through a Wide TFT-LCD Display using an LED Back Light. Touch screen for maximum user convenience. Digital Tuner Feature Digital Tuner using PLL method that supports Radio memory of 40 broadcast stations. Radio broadcast station name Displays broadcast station names. Support for various Media Formats Support for various media formats, including Radio, USB, iPod, AUX and Bluetooth Audio Streaming modes My Music Supports copying of music stored within USB devices into My Music (internal memory) mode Multimedia Player 1-4 I Basic Component Names and Functions Head Unit Name RADIO MEDIA SEEK TRACK POWER/
VOL Description Selects FM/AM/SiriusXM mode Each time this is pressed, the mode is changed in the following order: FM AM SiriusXM FM. Selects MEDIA mode. If the media is not connected MEDIA mode will not be activated. When pressed quickly (less than 0.8 seconds), FM/AM mode: Plays the previous/next fre-
quency. SiriusXM mode: Changes the channel. MEDIA (USB/iPod/My Music) mode: Changes the track, file or title (except for USB Image and AUX). When pressed and held down (more than 0.8 sec-
onds), FM/AM mode: Continuously changes the fre-
quency until the key is released. MEDIA (USB/iPod/My Music) mode: Rewinds or fast forwards the track or file (except for USB Image, Bluetooth Audio, and AUX). When power is off, press to turn power on. When power is on, press and hold (more than 0.8 seconds) to turn the power off. When power is on, press quickly (less than 0.8 seconds) to turn Audio off. Turn left/right to adjust the volume. Name Description PHONE Displays the Bluetooth phone mode. APPS/
Moves to the Apps/Info screen. UVO SETUP Moves to the UVO mode Moves to the Setup screen. TUNE FM/AM mode: Changes the frequency. SiriusXM mode: Changes the channel. MEDIA (USB/iPod/My Music) mode: Changes the track, file or title (except USB Image, Bluetooth Audio, and AUX). RESET Resets the system settings. (Preset radio channels and other data will not be deleted) The actual feature in the vehicle may differ from the illustration. 1 0 Component Names and Functions I 1-5 Steering Wheel Controls Name Description Name Description MODE VOL +
VOL -
When pressed quickly (less than 0.8 seconds), Activates voice recognition. When pressed and held (more than 0.8 seconds), Ends voice recognition. If iOS device is connected through Bluetooth, activates or ends Siri Eyes Free. Each time this is pressed, the mode is changed in the following order: FM AM SiriusXM USB or iPod AUX Bluetooth Audio My Music FM If the media is not connected, the corresponding modes will be disabled Press and hold (more than 0.8 seconds) to turn the Audio system on/off When power is off, press button to turn power back on Controls the volume When pressed quickly (less than 0.8 seconds), FM/AM mode: searches broadcast frequencies saved to Presets SiriusXM mode: searches broadcast channels saved to Presets MEDIA (USB/iPod/My Music) mode: changes the track, file or title (except USB Image, AUX) When pressed and held (more than 0.8 seconds), FM/AM mode: automatically searches broadcast frequencies SiriusXM mode: automatically searches broad-
cast channels MEDIA (USB/iPod/My Music) mode: quickly looks up songs (excluding USB images, AUX and Bluetooth audio files) When pressed quickly (less than 0.8 seconds), When pressed in the dial screen, makes a call When pressed in the incoming call screen, answers the call When pressed during call waiting, switches to waiting call (Call Waiting) When pressed and held (more than 0.8 seconds), When pressed in Bluetooth Hands-free, redials the last dialed call When pressed during a Bluetooth Hands-free call, switches call back to mobile phone (Private) When pressed while calling on the mobile phone, switches call back to Bluetooth Hands-free
(operates only when Bluetooth Hands-free is connected) When pressed during a call, ends the phone call When pressed in the incoming call screen, rejects the call The actual feature in the vehicle may differ from the illustration. 1 0 Component Names and Functions I 1-7 Starting the System for the First Time Turning the System On/Off Press the engine start button or set the ignition key to On or ACC. Each time you turn on the system, a boot logo and safety warning will appear. Pressing the power key on the head unit will display the safety guide. To change the system language between English, French, Spanish and Korean, select the Language button. NOTICE You cannot operate the system while it is booting up. It may take some time for all of features of the system, particularly the voice recognition system, to be ready for use. Pressing and holding the power key on the head unit will turn off the system. You can change Screen Saver Settings in Setup to display a clock on the Screen Saver. i Information If you turn off the system during a phone call using the Hands-free feature, then the call will automatically switch to your mobile phone. NOTICE Check the volume when turning on the system. Before turning on the system, adjust the volume to a reasonable level. System Reset The System Reset function restores the system when it is not operating correctly. Press and hold the RESET key for a sec-
ond or longer. (It is recommended that you press the RESET key using a tool, such as a pin or a clip.) 1 0 Starting the System for the First Time I 1-9 Battery Warning Message Always use the system while the car engine is running. If you turn on the sys-
tem while the engine is off, a battery warn-
ing message will appear. When the engine starts, the message will disappear. Restrictions on Features for Safety Measures Several features are limited while driving. The restriction screen will disappear when shifting gears into P or putting the parking brake on. WARNING
- Blank Screen Refrain from use if the screen is blank or no sound can be heard as these signs may indicate product malfunction. Continued use in such conditions could lead to accidents ( res, electric shock). NOTICE If you use the system for a long time with the engine off, the battery may become completely discharged. WARNING
- Touching the Antenna During A Thunder Storm Do not touch the antenna during thunder or lightning as such acts may lead to lightning induced electric shock. 1-10 I Basic Home Screen Controls Menu Con guration for the Home Screen Tap the icon on any screen to display the Home Screen below. Features Description Radio/
Media Widget Connectivity Widget All Menus My Menu Apps/Info Setup Shows brief information on the radio or media that is now playing. Tap the area to move to the mode that you are listening to. Shows any connected devices such as iPod, and Bluetooth. Shows all of the items in the system menu. You can add up to eight menus here. Add your favorite menus to have quick and easy access to them. Moves to the Apps/Info screen. Moves to the Setup screen. Information Display on the Status Bar Displays the date and time, along with the system status shown by the various icons to the right of the clock. The icons in the following table indicate the various types of sys-
tem status details and events. Icon Description Displayed when the audio is muted. Displays the remaining battery of the Bluetooth phone. Displayed when connected to Bluetooth for handsfree. Displayed when connected to Bluetooth for streaming audio. Displayed when connected to Bluetooth for streaming audio and handsfree. Displayed when downloading contacts or recent calls from the Bluetooth phone. Displayed while on a call with the Bluetooth phone. Displayed when the microphone of the Bluetooth is muted. Displays the signal strength of the Bluetooth phone. Displayed when 911 connect is available. 1 0 Starting the System for the First Time I 1-11 On-Screen Touch Controls Learn how to touch the screen to operate the system. Drag & Drop Select a menu or item you want, then drag and drop it to where you want to place it. Select Tap lightly on a menu or an item to select it. NOTICE The system will not recognize your touch if you wear a glove or other non-conductive material. Touch the screen using your nger, an electrostatic touch-screen glove, or a stylus pen. Drag or touch the slider along the play bar in the music screens to jump to the point that you want to play from. Adding Your Favorite Menu Items to My Menu From the Home screen, select My Menu icon, and then Edit From the Edit My Menu screen, select menu items from the list on the right, then drag and drop them to a desired place on the left. To remove the item from My Menu, drag item from the left and drop them on the right. i Information Up to eight items can be added to My Menu. 1-12 I Basic Flick (Quick Scrolling) Drag the frequency bar to the left or right to move to the frequency that you want. From the Edit My Menu screen, drag and drop icons to add, delete, or move to/from My Menu. Quickly moves up and down in the list. NOTICE Moving the list when there are many items will display a handler on the right of the display. You can easily move many items at a time with the handler. You can view the previous or next image by flicking left/right on an image on the USB Image screen. Flick left/right on the frequency bar in the radio player to look up the previous/next frequency available. 1 0 Starting the System for the First Time I 1-13 Press and Hold Pressing the buttons in the music player will fast forward/rewind the music. and 1-14 I Basic part.2 Radio/Media FM/AM (with HD Radio) HD Radio Technology (if equipped) FM/AM SiriusXM USB iPod AUX Bluetooth Audio My Music Radio/Media FM/AM (with HD RadioTM) Features Description You can access the radio player either by pressing the RADIO key or by selecting the Radio menu from All Menus on the Home screen. Preset Frequencies FM/AM Mode Display Controls Frequency Bar Frequency Tag Presets Menu i Information If you press the RADIO key when power is off, the power will turn on and a radio broadcast will be tuned from the current mode. If you are in radio mode, select the media widget from the Home screen to access the radio player. 2-2 I Radio/Media The stored preset frequencies are displayed for user selection. After selecting frequency, press and hold the preset button for more than 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button. Flick the preset frequencies up/down to scroll quickly through presets. Flick the frequency bar left/right to search for available radio channels to the left or right of the current channel. Dragging: Drag the frequency bar to the left/
right to find the radio channel that you want. Displays the current frequency. Saves the current musics tag information to the head unit. If connected to iPod, the tag informa-
tion can be saved on the device. Shows the stored presets for user selection. List Moves to the frequency list. Info Turns the Radio text information transmitted from the broadcasting station on and off. Preset Scan Plays preset frequencies for 10 seconds per item. Sound Settings Moves to the Sound Settings. Features Scan/Preset Scan Band HD Radio
(if equipped) Scan SEEK/TRACK TUNE Description Displays an active mode from Scan and Preset Scan modes. Changes to the desired band from among FM, AM, and SiriusXM. Used to set whether to turn HD Radio recep-
tion On or Off. Shortly plays the broadcasts for the frequen-
cies with superior reception for 5 seconds per item. When pressed quickly (less than 0.8 sec-
onds): Seeks the previous/next frequency. When pressed and held (more than 0.8 sec-
onds): Moves quickly through all of the fre-
quencies. The moment that you release the button, the system seeks the next available frequency. TUNE knob to manually seek avail-
Turn the able frequencies. FM: Increment/decrement by 200 kHz AM: Increment/decrement by 10 kHz 2 0 FM/AM (with HD Radio) I 2-3 HD Radio Technology (if equipped) Program Service Data:
Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams. Adjacent traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, origi-
nal music as well as deep cuts into traditional genre. Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like todays FM and FM sounds like a CD. If an HD Radio broadcast is received, the radio mode will switch from analog broadcast to HD Radio broadcast. i Information The HD Radio screen is displayed only when a HD Radio broadcast is being received. 2-4 I Radio/Media HD Radio Mode Display Controls Name Description HD Radio Reception &
Channel buttons HD Channel Number HD Broadcast Info HD Radio Displays main HD Radio channels and used to directly select the current available channels. The HD Radio related icon display becomes active within regions where an HD Radio signal can be received. Analog station and corresponding HD Radio channel number saved in the pre-
set list. Displays detailed information about the cur-
rent broadcast (the details of the information shown are different depending on whether the Info button is selected) When the HD Radio soft button is ON
(the red indicator on the HD Radio button is illuminated), HD Radio signals will be received. 2 0 HD Radio Technology (if equipped) I 2-5 FM/AM Features Description The stored preset frequencies are displayed for user selection. After selecting frequency, press and hold the preset button for more than 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button. Flick the preset frequencies up/down to scroll quickly through presets. Flick the frequency bar left/right to search for available radio channels to the left or right of the current channel. Dragging: Drag the frequency bar to the left/
right to find the radio channel that you want. Displays the current frequency. Shows the stored presets for user selection. List Moves to the frequency list. Preset Scan Plays preset frequencies for 10 seconds per item. Sound Settings Moves to the Sound Settings. You can access the radio player either by pressing the RADIO key or by selecting the Radio menu from All Menus on the Home screen. Preset Frequencies FM/AM Mode Display Controls Frequency Bar Frequency Presets Menu i Information If you press the RADIO key when power is off, the power will turn on and a radio broadcast will be tuned from the current mode. If you are in radio mode, select the media widget from the Home screen to access the radio player. 2-6 I Radio/Media Features Scan/
Preset Scan Band Info Scan SEEK/TRACK TUNE Description Displays an active mode from Scan and Preset Scan modes. Changes to the desired band from among FM, AM, and SiriusXM. Turns the Radio text information transmitted from the broadcasting station on and off. Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per item. When pressed quickly (less than 0.8 sec-
onds): Seeks the previous/next frequency. When pressed and held (more than 0.8 sec-
onds): Moves quickly through all of the fre-
quencies. The moment that you release the button, the system seeks the next available frequency. TUNE knob to manually seek avail-
Turn the able frequencies. FM: Increment/decrement by 200 kHz AM: Increment/decrement by 10 kHz 2 0 FM/AM I 2-7 SiriusXM Features Description You can access the radio player either by pressing the RADIO key or by selecting the Radio menu option from All Menus on the Home screen. Select the SiriusXM band from the radio player. SiriusXM Mode Display Controls i Information If you press the RADIO key when the power is off, the power will turn on and a radio broadcast will be tuned from the current mode. If you are in the SiriusXM mode, select the SiriusXM radio widget from the Home screen to access the radio player. Preset Frequencies Channel Logo Channel Info Content Info Category Info Band Direct Tune Scan Category Lock Category Selection Buttons Play Live When the power is off, pressing the RADIO key will turn the power on Skip Backward and play a SiriusXM Radio broadcast. 2-8 I Radio/Media Shows the stored presets for user selection. After selecting frequency, press and hold the preset button for more than 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button. Displays the current channel logo. Displays the current channel number and name. Displays the artist, title and other information about the current playing song. Displays the category of the currently playing song. Changes to the desired band from among FM, AM, and SiriusXM. Used to search for the desired channel by entering the channel number. Plays all receivable channels for 10 seconds per item. If pressed, only the channels for the current category can be searched or scanned. Used to select the previous/next category. Switches to the live broadcast mode. Repeats the previously broadcasted program. Holding for less than 0.8 seconds: Moves to the previous segment. Holding for more than 0.8 seconds: Moves to the previous 5 seconds. Features Play/Pause Skip Forward Tag Presets List Menu SEEK/TRACK Description Pauses/plays the current broadcasting program. Moves to the next segment. Saves the current musics tag information to the head unit. If connected to iPod, the tag informa-
tion can be saved on the device. Shows the stored presets for user selection. Moves to the channel list. What is on My Presets?
The program schedule saved in my preset. (For more details, see Section 3.10. Viewing Menu.) Featured Favorites Theme channels recommended by SiriusXM.
(For more details, see Section 3.10. Viewing Menu.) Preset Scan Plays preset channels for 10 seconds each. Sound Settings Moves to the Sound Settings. When pressed quickly (less than 0.8 sec-
onds): Plays the previous/next channel. When pressed and held (more than 0.8 sec-
onds): Continuously changes the channel until the key is released and plays the current channel. TUNE Changes the channel. 2 0 SiriusXM I 2-9 Selecting through Channel/Category List Select the List egory and channel. Select the desired cat-
If you select the Skip button, you can TRACK scan channels using the TUNE knob by skipping the key or the channels that you chose to skip. SEEK Direct Tune Viewing Menu Using the Menu button on the right, you can view the program schedule and infor-
mation about the Featured Favorites pro-
vided by SiriusXM. Enter the number of the channel you want to receive. Select the desired category and the chan-
nel. Once selected, the previous screen will be restored and the selected channel will begin playing. 2-10 I Radio/Media What is on My Presets? (Program Schedule) Name Description You can select Menu to see program information and the sched-
ules of broadcast channels listed in the presets. Change Broadcast Date Preset Program Information By selecting this option, you can select a broad-
casting date. Broadcast information will be provided for one week from the current date. Shows saved presets for user selection A total of 40 frequencies for SiriusXM modes can be displayed. Shows you the program titles to be broadcasted at the time that you have chosen. Select a program to see more details. If there is more information on the program you selected, an arrow button will be displayed on the right of the list. You can see more program information by selecting the arrow button. 2 0 SiriusXM I 2-11 Featured Favorites Featured Favorites feature allows SiriusXM to broadcast additional presets. Example 1: Marthas Favorites may represent Martha Stuarts favorites pre-
sets on her radio. Example 2: During holidays, Holiday Music may represent all the SiriusXM channels that are playing the holiday music for easy access by users. Multiple sets Featured Favorites data can be broadcast by SiriusXM and can change from time to time. 2-12 I Radio/Media USB Before Playing a USB MP3 Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on. Files that are not standard format music/image files will not be played. Take caution so that the USB connector does not come in con-
tact with body parts or objects. Repeated connecting/disconnecting of USB devices within short periods of time may result in product malfunction. Make sure to connect/disconnect external USB devices with the audio power turned off. The amount of time required to recognize the external USB device may differ depending on the type, size, or file formats stored on the USB. The use of USB devices for purposes other than playing music For MP3/WMA/OGG files, only music files with compression and image files is prohibited. rates between 8Kbps ~ 320Kbps can be played. Heed caution to static electricity when connecting/disconnecting external USB devices. Encoded MP3 Players will not be recognized when connected as an external device. When connecting an external USB device, the device may not properly recognize the USB is in some states. Do not use the USB I/F to charge batteries or USB accessories that generate heat. Such acts may lead to worsened perfor-
mance or damage to the device. The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. Connect the USB directly with the multimedia terminal of the vehicle. Only products formatted with byte/sectors under 64Kbyte will be When using mass storage USB devices with separate logical recognized. USB devices, formatted to the FAT12, FAT16, or FAT32 file sys-
tem, are recommended. File systems other than FAT12, FAT16, FAT32, exFAT, and NTFS are not supported. Some USB devices may not be supported due to compatibility issues. drives, only files saved to the root drive can be played. When application programs are installed to specific USBs, files may not properly play. 2 0 USB I 2-13 Plug Type Connector Product Name Manufacturer XTICK BMK SKY-DRV TRANSCEND JetFlash Sandisk Cruzer Micro ZyRUS NEXTIK LG BMK Technology Sky Digital Transcend SanDisk ZyRUS Digiworks i Information Problems that occur through use of USB devices not listed within the above table are not covered by the product warranty. The device may not operate normally if MP3 Players, cellu-
lar phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk drives) are connected with the device. Charging through the USB may not work for some mobile devices. The device may not support normal operation when using a USB memory type besides Metal Cover Type USB Memory. The device may not support normal operation when using for-
mats such as HDD Type, CF, or SD Memory. When playing iPods, please use a dedicated iPod car cable. Normal operation cannot be guaranteed when other cables are being used. The device will not support files locked by DRM (Digital Rights Management). USB memory sticks used by connecting an Adaptor (SD Type or CF Type) may not be properly recognized. Only use Plug type connector products, as shown in the figure below. To play USB MP3, the USB device must be connected to the USB port in the front multibox. The USB port in the center con-
sole storage (if equipped) is for charging only. 2-14 I Radio/Media Supported USB MP3 music speci cations Supported Image Speci cations Name MP3 File Specification Recommended Bit Rates and Sampling Frequency ID3 Tag Detailed Specifications Description Specification: MPEG1 AUDIO LAYER 3 Acceptable sampling frequency: 32, 44.1, 48 (kHz) Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps) 96, 128, 192 Kbps fixed bit rate/44.1kHz Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3, ID3v2.4 ID3 tags Maximum directory layers: 20 layers Maximum length of folder name/file name: 255Bytes Supported characters for folder name/file name:
Alphanumeric characters, Korean standard charac-
ter set 2,350 characters, Simplified Chinese 4888 characters Maximum number of folders which can be stored onto one USB: 2000 folders (including ROOT) Maximum number of files which can be stored onto one USB: 8000 i Information The sound quality of MP3 files that use bitrates exceeding 192 Kbps cannot be guaranteed. When using les without xed bit rates, some features (FF/REW features) may not properly operate. Name Image format Supported image file size Description JPG, GIF, BMP, PNG (animated GIF, etc. are not supported) 5M pixels for JPG, BMP, PNG (1M pixels maxi-
mum for GIF) 2 0 USB I 2-15 USB Music Mode Display Controls Features Description Previous File Play/Pause Next File Repeat Shuffle Features Mode File Index Repeat/
Shuffle/Scan Play Time Song Info Description Displays the current operating mode Shows the current file/total files within the USB From Repeat/Shuffle/Scan, displays the current operating function Displays the current play time/total play time Displays the information of the current track When a track in the file tab on the list screen is selected: Displays folder, file, title, artist, album info When a track in the other tabs on the list screen is selected: Displays artist, title, album info List Moves to the list screen Back Button Converts to basic mode screen 2-16 I Radio/Media If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file from the beginning (Depends on the play time) If play time is less than 3 seconds, moves to previous file If play time is more than 3 seconds, play the current file from the beginning If button is pressed (more than 0.8 seconds): It rewinds the track Plays/pauses the current file If button is pressed (less than 0.8 seconds):
Moves to the next file If button is pressed (more than 0.8 seconds):
It fast-forwards the track Repeats the current file If select the song in the file tab on the list screen: Select the Repeat button to switch between repeating one song, repeating folder, and turning repeat off If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Repeat button to switch between repeat-
ing one song and turning repeat off Plays files in random order If select the song in the file tab on the list screen: Select the Shuffle button to switch between Shuffle Folder, Shuffle All, and turn-
ing shuffle off If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Shuffle button to switch between Shuffle Category and turning shuffle off Features Description Scan Scans the beginning parts of USB files (approx. 10 seconds per file) If select the song in the file tab on the list screen: Select the Scan button to switch between Scan Folder, Scan All, and turning scan off If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Scan button to switch between Scan category and turning scan off Menu TUNE Add to Playlist: Add the current track to the Playlist: Playlist is placed on the left tab in the list Save to My Music: You can save the current track to My Music. You can play saved track from My Music without USB. Access to My Music in the Media mode. Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. TUNE knob to search a desired Turn the track. If the desired track is displayed, select the TUNE knob to play the track. TUNE knob is not pressed within If the 5 seconds of searching tracks, the track info for the current track is restored. 2 0 USB I 2-17 Features Description Menu Features Folder/
Category Name Current Song Description Displays folder/category name in the list Displays the current playing file name Search Menu Back Button Converts to basic mode screen Upper Folder/
Category Moves to Upper Folder SEEK/TRACK Add to Playlist: Adds the current track to the Playlist: Playlist is placed on the left tab in the list (Maximum 100 files) Select a desired track and press Add to Playlist to add the track in the playlist. Delete from Playlist: Select a track you want to delete from the playlist and press Delete from Playlist to delete the track in the playlist Now Playing: When moving to a different list screen, moves to the list page where the cur-
rent file is located (Becomes disabled when the current list includes the current file) Save to My Music: Stores the music. The stored music can be played in My Music. (This function is not provided in Playlist.) Search tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album. If access the search menu while playing a track, it moves to the previous search mode. If button is pressed (less than 0.8 seconds):
Plays previous/next track. If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind or fast-forward the track. TUNE TUNE knob to move the focus to the Turn the previous/next list. If the desired track is displayed, press TUNE knob to play the track. 2-18 I Radio/Media USB Image Mode Display Controls Features Mode Folder/
File Name File Index Slideshow Rotate Info Adjust Image Size List Previous/
Next image Description Displays the current operating mode Displays folder name where image is located Shows the current file/total files within the USB Images as slideshow in 5, 10, 20, 30 second intervals Rotate image in clockwise direction Shows the file name, resolution and file type of current image Enlarge/reduce (zoom-in/zoom-out) image size Moves to the list screen Swipe image left or right to see Previous/Next image 2 0 USB I 2-19 Features Description Current File Displays the current playing file name Back Button Converts to basic mode screen Menu SEEK/TRACK TUNE Now Playing: When moving to a different list screen, moves to the list page where the current file is located (Becomes disabled when the cur-
rent list includes the current file) Controls background mode Radio mode: Changes Frequency and Channel Media mode: Changes Track (excluding AUX) Controls background mode Radio mode: Changes Frequency and Channel Media mode: Changes track (excluding AUX). If a desired track is displayed, press the knob to move to the track. 2-20 I Radio/Media iPod Using iPod Devices iPod is a registered trademark of Apple Inc. iPod mode will not operate if the con-
nected iPod cannot be recognized due to operation of unsupported versions that do not support related protocols, iPod abnormalities, or iPod device defects. Some iPods with unsupported communication protocols may not prop-
erly operate with the Multimedia system. For fifth generation iPod Nano devices, the iPod may not be recognized when the battery level is low. Please charge the iPod for use. Search/play orders shown within the iPod device may differ with the orders shown within the Multimedia system. If the iPod malfunctions due to an iPod device defect, reset the iPod and try again. (To learn more, refer to your iPod manual) If repeatedly connect and disconnect iPod/iPhone to the Multimedia system with USB cable in a short time, it may cause abnormal operation. The time for recognition of iPod/iPhone may vary depending on device type, firmware version and iOS version. For some iPod Touch and iPhone devices, connecting Bluetooth while the iPod is operating may result in discon-
tinued iPod sound. When such devices with Bluetooth support are connected, this problem occurs as the sound source is changed from the Dock Connector
(USB connector cable) to Bluetooth. To prevent this symptom, Bluetooth Audio function in the Multimedia system is limited if iPod/iPhone is connected to the system through both cable and Bluetooth. To listen to the iPod sound, use either iPod menu with USB connec-
tion or Bluetooth Audio with Bluetooth connection. To listen to the iPod sound, reconnect the USB cable or change the audio out-
put settings in iPod/iPhone to Dock. In order to use the iPod while operating the keys, you must use a dedicated iPod cable. (the cable that is supplied when purchasing iPod/ iPhone products) During ACC ON state, connecting the iPod through the iPod cable (The cable that is supplied when purchasing iPod/
iPhone product.) will charge the iPod through the head unit. The use of genuine iPod cables sup-
The use of genuine iPod cables sup-
plied by Apple is recommended. (The plied by Apple is recommended. (The use of other products may result in use of other products may result in noise or abnormal operation.) noise or abnormal operation.) To play iPod music through cable con-
nection, the iPod/USB cable must be connected to the USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only. 2 0 iPod I 2-21 When connecting with the iPod cable, make sure to fully insert the jack to pre-
vent communication interference. If the iPod is connected to the vehicle while it is playing, a high pitch tone may sound for about 1~2 seconds immediately after connection. If possible, connect the iPod to the vehicle with the iPod stopped/paused. Within iPhones, streaming audio and iPod control may occasionally conflict. If problems persist, remove the iPhone and connect again. When connecting to iPod Nano/Classic, the Kia Motor logo appears on the Apple device. For the iPod Nano 6 genera-
tion, however, the logo image does not appear since it is not supported. Also, all iPhone and iPod Touch products do not support this function. In Apples iOS 6.0 version or later, Podcast and Audiobook media files are designed to be played with the Podcasts and iBooks applications spe-
cifically designed for Apple products. If the Apple device does not provide the Podcast and Audiobook lists, the playlist may not be displayed and played in the iPod mode. If the Apple Podcasts and iBooks apps are not installed on the Apple device, but the Apple device provides the Podcast and Audiobook lists, you can play files in other categories in iPod mode. The screen of multimedia system can be different when you run other music players (e.g. iHeartRadio) on your con-
nected device. 2-22 I Radio/Media Caution While using a connected iPhone/iPod Touch device, it may not operate nor-
mally if the user changed some func-
tions in the device. When calling with an iPhone connec-
tion, song may stop playing due to an Apple device feature. If sound does not resume after the call is terminated, check the device status. If lots of songs have the same informa-
tion, skipping may occur when previous/
next song is executed due to an Apple device feature. Also problems may occur depending on device type or iOS version. If lots of songs have the same informa-
tion, the song that plays may be differ-
ent between the system and the Apple device. Reset the device or delete the same songs in the Apple device using iTunes. If you control pause, repeat, shuffle, or seek songs when the play time is less than 3s before the song is finished play-
ing, it may occur difference of playing song between the Multimedia system and Apple device. Access to iPod music from another mode or pause a song and then play a song again in Apple device. Type 1G 2G 3G iPod Mini iPod Shuffle iPod Nano iPod Touch iPad iPad Mini
(iOS 1.1 not sup-
ported) We recommend that your Apple device uses the latest firmware since some problems may occur due to an outdated firmware or other software related issues. 4G 5G Not Supported Not Supported 6G 6.5G 7G Not released Not released
(Unable to charge, Not verified, Normal working not guaranteed)
(Unable to charge, Not verified, Normal working not guaranteed) iPod Classic Not Supported
(iPod with Video)
(iPod Classic)
(iPod Classic) Not released Type 3G 3GS iPhone Not verified, Normal working not guaranteed 4 4S 5 5C 5S 6 6+
2 0 iPod I 2-23 If connect to the Multimedia system while podcast or iTunes music down-
loading to iPod/iPhone, it may occur some problems when you select song in the list. Reconnect iPod/iPhone to the Multimedia system when downloading is finished or the file deleted. If connect to the Multimedia system while sync, it may occur some problems. Try to use iPod/iPhone connection after sync complete. (To learn more, refer to your iPod manual) iPhone and iPod Touch devices are guaranteed to work normally on iOS 9.3.2 or below. However, they may not work normally on future iOS versions as their operations have not yet been tested. Caution If the iPhone/iPod Touch supports Bluetooth, the Apple device will not be able to use the Bluetooth function if the device is connected through both the USB port and via Bluetooth. Disconnect the USB connection then use Bluetooth Audio. If iPod/iPhone connected to the Multimedia system through both USB and AUX. iPod/iPhone keeps output sound via AUX, thus it may occur sound will not output in iPod mode. If AUX cable connected to iPod/iPhone but not connect to the Multimedia sys-
tem, it may occur sound will not output in iPod mode due to iPod/iPhones fea-
ture. Especially, if you use AUX cable like pictures, this problem may occur. Disconnect AUX cable from iPod/iPhone first, then connect to the Multimedia system via USB. Or change settings to Dock in iPod/iPhone. 2-24 I Radio/Media iPod Mode Display Controls Features Description Features Mode Song Index Repeat/Shuffle Play Time Song Info List Description Displays the current operating mode Shows the current song/total songs From Repeat/Shuffle, displays the current oper-
ating function Displays the current play time/total play time Displays the artist/song title/album info Moves to the list screen Previous File Play/Pause Next File Repeat Shuffle If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file from the beginning (Depends on the play time) If play time is less than 3 seconds, moves to previous file If play time is more than 3 seconds, play the current file from the beginning If button is pressed (more than 0.8 seconds): It rewinds the track Plays/pauses the current file If button is pressed (less than 0.8 seconds):
Moves to the next file If button is pressed (more than 0.8 seconds):
It fast-forwards the track Repeats the current file Select the Repeat button to switch between repeating 1 track, and turning repeat off Plays files in random order When selecting the Shuffle button, it changes to shuffle category deactivate shuffle then repeat Shuffle Category: Shuffle song in the current category Back Button Menu Move to home/previous mode screen Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. 2 0 iPod I 2-25 Features Description TUNE TUNE knob to search a desired Turn the track. If the desired track is displayed, press the TUNE knob to play the track. TUNE knob is not pressed within If the 5 seconds of searching tracks, the track info for the current track is restored. 2-26 I Radio/Media Features Description Category Name Displays the category name Category List Displays the contents of selected category If there are many items in the list, items are added in order and the scroll bar on the right is adjusted accordingly. Back Button Upper Category Moves to Upper Category Converts to basic mode screen Search Menu SEEK/TRACK TUNE Search tracks by the list type. Search songs according to Playlist, Artist, Song, Album, Genre, Composer, Podcast and Audiobook. If access the search menu while playing a track, it moves to the previous search mode. If button is pressed (less than 0.8 seconds):
Plays previous/next track. If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind or fast-forward the track. TUNE knob to play the track. TUNE knob to search a desired Turn the track. If the desired track is displayed, press the If you do not anything with the knob for TUNE knob search will be 5 seconds, the terminated. 2 0 iPod I 2-27 NOTICE If only a cable is connected to the AUX without an external device, the mode will be changed to AUX, but noise may occur. When an external device is not being used, remove the connector jack. When the exter nal device power is connected to the power jack, playing the external device may output noise. In such cases, disconnect the power connection before use. AUX Connecting an External Device If an external device connector is con-
nected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored. AUX mode can be used only when an external audio player has been con-
nected. The AUX volume can also be controlled separately through the connected device. The actual feature in the vehicle may differ from the illustration. 2-28 I Radio/Media Bluetooth Audio Bluetooth Audio Mode Display Controls Features Title Description Name of current song If play time is less than 3 seconds, moves to the previous file If play time is more than 3 seconds, plays the current file from the beginning This function may differ depending on the model of mobile phone. Previous File Features Description Mode Displays the current operating mode Phone Name Displays name of connected phone Artist Info Name of current artist Play/Pause Plays/Pauses Bluetooth Audio Next File Repeat Shuffle Menu Moves to the next file Repeats the current file. This function may differ depending on the model of mobile phone. Plays files in random order. This function may differ depending on the model of mobile phone. Connections: Moves to the Bluetooth Settings screen. You can pair a new device or change/
delete paired device(s). Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. SEEK/TRACK TUNE Plays the previous/next file TUNE is not supported i Information Artist info and Title may not be supported by mobile phone 2 0 Bluetooth Audio I 2-29 Bluetooth Connection Settings Settings for pairing, connection and dis-
connection of a Bluetooth device. In Bluetooth Audio play screen, select Menu and then Connections . i Information If the music in the mobile phone is not played after changing to audio streaming mode, press the play button. Thus check if the music is playing in the Bluetooth device after changing to audio streaming mode. Audio streaming may not be supported for some mobile phones. Please check the Bluetooth compatibility in below website: KIA Motors Corporation http://www.kia.com 2-30 I Radio/Media My Music My Music Mode Display Controls Features Mode File Index Repeat/
Shuffle/Scan Play Time Song Info Description Displays the current operating mode Shows the current file/total files From Repeat/Shuffle/Scan, displays the cur-
rent operating function Displays the current play time/total play time Displays the information about the current track When a track in the file tab on the list screen is selected: Displays file, artist, title, album info When a track in the other tab on the list screen is selected: Displays artist, title, album info Features List Previous File Play/Pause Next File Repeat Description Moves to the list screen If button is pressed (less than 0.8 seconds):
Moves to the previous file or play the current file from the beginning (Depends on the play time) If play time is less than 3 seconds, moves to previous file If play time is more than 3 seconds, play the current file from the beginning If button is pressed (more than 0.8 seconds): It rewinds the track Plays/pauses the current file If button is pressed (less than 0.8 seconds):
Moves to the next file If button is pressed (more than 0.8 seconds):
It fast-forwards the track Repeats the current file If select the song in the file tab on the list screen: Select the Repeat button to switch between repeating one song and turning repeat off. If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Repeat button to switch between repeat-
ing one song and turning repeat off 2 0 My Music I 2-31 Features Description Shuffle Plays files in random order If select the song in the file tab on the list screen: Select the Shuffle button to switch between shuffle and turning shuffle off If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Shuffle button to switch between shuffle and turning shuffle off Scan Scans the beginning parts of files (approx. 10 seconds per file) If select the song in the file tab on the list screen: Select the Scan button to switch between scan and turning scan off If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select the Scan button to switch between scan and turning scan off Menu TUNE Add to Playlist: Adds the current song to the Playlist: Playlist is placed on the left tab in the list Delete Current File: Deletes the current track from My Music. Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound. TUNE knob to search a desired Turn the track. If the desired track is displayed, press the TUNE knob to play the track. TUNE knob is not pressed within If the 5 seconds of searching tracks, the track info for the current track is restored. 2-32 I Radio/Media Features Description Features Folder/
Category Name Current Song Back Button Upper Folder Description Displays folder/category name in the list Displays the current playing file name Converts to basic mode screen Moves to Root Folder Menu Search Menu SEEK/TRACK TUNE Add to Playlist: Adds the current track to the Playlist: Playlist is placed on the left tab in the list (Maximum 100 files) Select a track and press Add to Playlist to add the track in the playlist Delete from Playlist: Select a track from the playlist and press Delete from Playlist to delete the track in the playlist Delete Files: Deletes files from My Music If delete file from My Music, the information related to song also deleted in the list. Now Playing: When moving to a different list screen, moves to the list page where the cur-
rent file is located (Becomes disabled when the current list includes the current file Search tracks by the list type. Search songs according to File, Playlist, Artist, Song and Album. If access the search menu while playing a track, it moves to the previous search mode. If button is pressed (less than 0.8 seconds):
Plays previous/next track. If button is pressed (more than 0.8 seconds):
Moves to play screen, and then it will rewind or fast-forward the track. TUNE knob to move the focus to pre-
Turn the vious/next file. If the file you want to play is dis-
played, press TUNE knob to play the track. TUNE knob is not pressed within If the 5 seconds of searching tracks, Tune search will be terminated. 2 0 My Music I 2-33 MEMO part.3 Bluetooth Before Using the Bluetooth Handsfree Bluetooth Connection Bluetooth Phone The Bluetooth Handsfree feature may not be supported in some mobile phones. For more information on mobile phone compatibility, visit the KIA Motor website
- KIA Motors Corporation: http://www.kia.com WARNING
- Distracted Driving Focus on the road while driving. The driver's primary responsibility is in the safe and legal operation of the vehicle. Drivers should not use any hand held devices or other equipment or vehicle systems that distract the driver during vehicle operation. Do not stare at the multimedia screen for long periods of time while driving. Staring at the screen for prolonged periods of time can lead to traf c accidents and can result in personal injuries. Precautions for Safe Driving Bluetooth is a feature that enables driv-
ers to make handsfree calls. Connecting the head unit with a Bluetooth phone allows the user to conveniently make calls, receive calls, and manage the phonebook. Before using Bluetooth Wireless Technology, carefully read the contents of this users manual. Excessive use or operations while driv-
ing may lead to negligent driving prac-
tices and be the cause of accidents. Do not operate the device excessively while driving. Viewing the screen for prolonged peri-
Viewing the screen for prolonged peri-
ods of time is dangerous and may lead ods of time is dangerous and may lead to accidents. When driving, view the to accidents. When driving, view the screen only for short periods of time. screen only for short periods of time. Bluetooth Before Using the Bluetooth Handsfree What is Bluetooth Wireless Technology?
Bluetooth Wireless Technology refers to a short-distance wireless network-
ing technology which uses a 2.45GHz frequency to connect various devices within a certain distance. Supported within PCs, external devices, Bluetooth phones, PDAs, various elec-
tronic devices, and automotive environ-
ments, Bluetooth Wireless Technology to be transmitted at high speeds without having to use a connector cable. Bluetooth Handsfree refers to a device which allows the user to conveniently make phone calls with Bluetooth mobile phones through the Multimedia system. 3-2 I Bluetooth CAUTIONS upon Connecting Bluetooth Phone Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth features. Even if the phone supports Bluetooth Wireless Technology, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth power is turned off. Disable the hidden state or turn on the Bluetooth power prior to searching/
connecting with the head unit. If Auto Connection is used, the Bluetooth phone is automatically con-
nected when the ignition is turned on, making it unnecessary to have to con-
nect the phone with the head unit every time. If you do not want automatic connection with your Bluetooth device, turn the Bluetooth feature off of the Bluetooth device. Park the vehicle when connecting the head unit with the mobile phone. Bluetooth connection may become intermittently disconnected in some mobile phones. Follow these steps to try again. 1. Turn the Bluetooth function within the mobile phone OFF/ON and try again. 2. Turn the mobile phone power OFF/
ON and try again. 3. Completely remove the mobile phone battery, reboot, and then again. 4. Reboot the Multimedia System and try again. 5. Delete all paired devices from both of Phone and Head Unit sides and then try again. The Handsfree call volume and quality may differ depending on the mobile phone. Pairing Bluetooth devices and use of other Bluetooth features are not sup-
ported when the vehicle is in motion. For safety, please first park your vehicle. If you continue having issue download-
ing your contacts to your vehicle, con-
tact your mobile phone provider. 3 0 Before Using the Bluetooth Handsfree I 3-3 Pairing a New Device Through the Phone Settings SETUP key. Select Bluetooth . Press the Select Bluetooth Connection . Select Add New . Pair your car after your mobile phone detects the Bluetooth device. Enter the passkey or accept the authoriza-
tion popup. Connect Bluetooth. Connecting Bluetooth Devices Connects the Bluetooth devices that you add. Connecting Devices by Selecting Phone/Call Press the PHONE key or key in the steering wheel control. Select the name of the device to connect. Connect Bluetooth. The default passkey is 0000. The vehicle name above is an example. Check the actual information on the product. Bluetooth Connection Pairing a New Device Before you can use the Bluetooth feature, you must first pair/connect your mobile phone to your car. Up to 5 Bluetooth devices can be paired. Only one Bluetooth device can be con-
nected at a time. Pairing a New Device by Selecting Phone/Call Press the PHONE key or key in the steering wheel control. Pair your car after your mobile phone detects the Bluetooth device. Enter the passkey or accept the authorization popup. Connect Bluetooth. 3-4 I Bluetooth Connecting Devices Through the Phone Settings SETUP key. Select Bluetooth . Press the Select Bluetooth Connection . Select the name of the device to connect. Connect Bluetooth. Disconnecting Bluetooth Devices Disconnects Bluetooth devices that are connected. SETUP key. Select Bluetooth . Press the Select Bluetooth Connection . Select the name of the device to disconnect. Deleting Bluetooth Devices Deletes the Bluetooth devices that you added. Note that deleting a Bluetooth device will delete all Call History and Contact Info downloaded along with it. Press the SETUP key. Select Bluetooth . S e l e c t Bluetooth Connection . S e l e c t Delete Devices . Select the device name to delete. Select Delete . 3 0 Bluetooth Connection I 3-5 i Information The battery level icon and the call signal strength indicator may not be supported in some Bluetooth devices. The battery level may differ from the actual level remaining. Bluetooth Phone Icons Description Phone Status Icons Shows the current phone status in the right top of the display. You can use Bluetooth phones when a Bluetooth Hands-free connection is established. You can use Bluetooth audio features when a Bluetooth audio connection is estab-
lished. You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are established. Call signal strength indicator Battery level of the Bluetooth devices connected Downloading Call History list Downloading Contacts In a Bluetooth phone call Microphone muted 3-6 I Bluetooth Dial Dials a call after the Bluetooth devices are connected. Press the PHONE key or the steering wheel control. key in You can also select All Menus icon, and then Phone icon. Name Description Accept/Reject Call Keypad Call Use the keypad to enter the phone number that you want to call. Press and hold the last number of a speed dial to dial a number that you added to the Speed Dial list in the phone Makes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to automatically dial that number again. Settings Moves to a screen of Phone Settings. Deletes the numbers that you entered. Delete i Information Some types of mobile phones may not support the Speed Dial function. If there is an incoming call after you made a Bluetooth connection, a popup message will appear. Name Accept Reject Description Answers the call. Ignores the call. i Information In some mobile phones, the caller's number may not be displayed, and the Reject feature may not be supported. 3 0 Bluetooth Phone I 3-7 Name Description Use Private End Contacts Outgoing Volume Keypad Switch Switches a voice call from the car Hands-free to the mobile phone. Ends a call. Displays the Contacts list. Displays the Mic Volume settings. You can adjust the in-call volume that the other party hears
(level 1 - 5). Moves to a screen for entering ARS numbers. Switches to a call on hold, if any. You can also switch calls by select-
ing the number in the Information Display. The Switch function switches the current call to a wait-
ing call in order to answer a new incoming call. i Information If the caller's number is listed in Contacts, the caller's name will be displayed. Otherwise, only the number will be displayed. In some mobile phones, the phone number may not be displayed. In some Bluetooth devices, the Use Private feature may not be supported. In some Bluetooth devices, the Switch feature may not be supported. During a phone call on a Bluetooth Hands-
free, you cannot access other modes, such as Radio and Settings. Depending on handset types, the in-call volume the other party hears may differ. If the other party hears your voice too low or too loud, adjust the mic volume. Using the Menu During a Phone Call When making a call, you can use the fol-
lowing menu items. 3-8 I Bluetooth Call History Press the PHONE key, and then Call History . Name All Dialed Received Missed Call History Download Description Lists the all call history. Lists the calls that you made. Lists the calls that you have received. Lists the calls you missed. Displays all of your call history. Select from the list to dial the number. Downloads the call history information from your mobile phone. i Information In some mobile phones, call records may not be added to your Call History. Calls from restricted ID's are not added to your Call History Information. Up to 50 calls can be added in each Dialed Calls/Received Calls/Missed Calls list. The durations of each dialed/received call are not displayed in your car's Call History list. While the call history download is in progress, the status bar displays an icon (
). If the call history download is turned off on the Bluetooth device, the call history download will fail. Some devices require a device authentication for downloading your call history. If download fails, check if the Bluetooth settings or display status are normal. Some devices do not support call history download. Check if your Bluetooth device supports download feature. For details regarding Bluetooth-supported devices and their functional compatibility, visit http://www. kia.com 3 0 Bluetooth Phone I 3-9 Some devices require a device authentication for downloading your contacts. If download fails, check your phone screen and confirm the download if necessary. Some devices do not support contacts download feature. Check if your Bluetooth device supports contacts download. For Bluetooth supporting devices details and compatibility, visit http://www.kia.com Contacts Press the PHONE key, and then Contacts
. Name Description Contacts List Download Search The list of Contacts. Select from the list to dial the number. Downloads contacts from your mobile phone. Searches Contacts. i Information Up to 5000 phone numbers can be downloaded from a single, paired Bluetooth device. You cannot edit or delete downloaded phone numbers from your car. Contacts can be viewed only when the Bluetooth device is connected. Even if the Bluetooth device is disconnected, the downloaded data will remain. (Note that deleting a paired phone will also delete all downloaded Contacts and Call History data) Downloaded phone numbers may be lost depending on the condition of the head unit. Keep your important data in a safe place. Contacts from both the SIM card and your mobile phone are downloaded at the same time by default. The status bar displays a (
) while downloading contacts. The download will not be available if the contacts download function is turned off on your Bluetooth device. 3-10 I Bluetooth Favorites Press the PHONE key, and then Favorites
. Name Description Favorites Add New Delete Items Delete All Lists the phone num-
bers saved as Favorites. Select from the list to dial the number. Adds a new number to Favorites. Deletes numbers that you select from Favorites. Deletes all of the num-
bers from Favorites. 3 0 Bluetooth Phone I 3-11 MEMO part.4 UVO eServices The 911 Connect feature may not operate in the following situations About UVO eServices Before using UVO eServices Connecting Bluetooth Pair a device from Bluetooth-enabled phone Connecting to smartphone via USB 911 Connect Roadside Assist Vehicle Diagnostics My Car Zone Parking Minder eServices Guide UVO eServices The 911 Connect feature may not operate in the following situations When the vehicle ignition is not turned on. When the system power supply is unstable. When the phone Bluetooth feature is set to off. When the attempted call is blocked due to user operations. When the phone Bluetooth cannot be connected or becomes disconnected. When the 9-1-1 call is unstable due to phone or other commu-
nication network issues. When the call feature is not operating due to phone settings set by the user. When the phone cannot be controlled via Bluetooth due to phone specifications or characteristics. When there are no phones paired with the vehicle. When cellular service is unavailable. When the power turns off due to phone power (battery) issues. When a Bluetooth device without phone feature support has been connected, such as an MP3 device. When the system is booting. 4-2 I UVO eServices Using UVO eServices and Precautions Download the UVO eServices App and install it on your smartphone. The app can be downloaded from your smartphones app store. For using UVO eServices call features such as 911 Connect, Roadside Assist and eServices Guide, a smartphone must be connected with the vehicle via Bluetooth. Pair and connect your smartphone with the vehicle. For information on connecting your Bluetooth device, refer to the smartphone users manual and instructions on the Phone Help screen on your radio. Up to five Bluetooth devices can be paired to the vehicle and only one device can be connected at a time. For using data communication of Vehicle Diagnostics, Parking Minder, and My Car Zone, smartphone must be connected with the vehicle via USB cable. The use of genuine cable is recommended. (The use of other products may result in abnormal or non-proper operation.) UVO eServices may not operate properly with incompatible smartphones. To view the list of compatible smartphones, please visit MyUVO.com Communication between the vehicle and smartphone app may temporarily disconnect depending on the phone state. If the feature is not operating properly, you may need to reset the UVO eServices App or the smartphone and try again according to the following steps. 1. Try feature again in the Head Unit 2. Restart smartphone app 3. Re-connect Bluetooth and USB cable 4. Reset smartphone 5. Delete Device and pair again Some services use the customers mobile phone data plan for data communication. Therefore, the features will function in accordance with the cellular plan. Login and activate the UVO eServices App on your smartphone. Use of the most up-to-date app version is recommended. 4 0 Some UVO eServices features will only be available when your smartphone is connected with the vehicle via USB and the UVO eServices App is running. For smartphone related inquiries, please visit MyUVO.com. Using UVO eServices and Precautions I 4-3 i Information 24-hour Roadside Assistance is a service plan provided by Kia Motors America, Inc. Certain limitations apply. Coverage details are available in the Kia Warranty and Consumer Information Manual. For access to Enhanced Roadside Assistance, a connected mobile phone via Bluetooth within the cellular service coverage area is required. To use UVO eServices, the following conditions must be met. 1. The UVO eServices smartphone app must be installed and you must log in using your MyUVO account credentials. 2. The smartphone must be connected via Bluetooth and USB cable to the vehicle. 3. Once this is complete, eServices must be activated. About UVO eServices UVO eServices provides the following features through Bluetooth and/or USB connection to your smartphone. Name Connection Description 911 Connect BT Roadside Assist BT & USB Vehicle Diagnostics USB My Car Zone USB Parking Minder USB eServices Guide BT 4-4 I UVO eServices If an airbag deploys, your vehicle automatically initiates a call to 9-1-1 and sends your vehicles location information to the 9-1-1 operator. If a diagnostic issue exists, you can connect with a Roadside Assist. Informs you if there is a diagnostic issue found in your vehicle. If an issue is found, you can contact a call center through Roadside Assist or reserve an appointment with your preferred Kia dealer through Schedule Service. Keeps track of predefined triggered alerts such as Speed Alert and Curfew Limit Alert from the My Car Zone feature. Saves the location of your parked vehicle on your UVO eServices smartphone app. You can check where your vehicle is parked through the UVO eServices App on your smartphone. Receive guidance on how to use UVO eServices. Before using UVO eServices Installing the UVO eServices App on your smartphone 1. Download and install the UVO eSer-
vices App on your smartphone. The app can be downloaded from the Apple App Store or Google Play. 2. Register your vehicle and account at MyUVO.com Note: MyUVO.com is accessible from your phones browser. 3. Start the UVO eServices App on your smartphone and log in. Connecting Bluetooth Press the key on the steering wheel or press the PHONE key on the SETUP Bluetooth head unit. Press Bluetooth Connection . Pair a device from Bluetooth-enabled phone 1. Turn on the Bluetooth feature on your smartphones Bluetooth settings screen. 2. Search Bluetooth devices on your smartphone. 3. Select the Vehicle Name on the phone that matches the name shown on the screen. 4. Verify the passkey shown on the touch-
screen. If the phone supports SSP, check the passkey on your Bluetooth device and confirm the authentication. 4 0 Pair a device from Bluetooth-enabled phone I 4-5 Activating UVO eServices Press the UVO key, then press the o r o r My Car Zone Vehicle Diagnostics Parking Minder button. Press the Yes button, then the UVO eServices activation process will begin. NOTICE Before activating UVO eServices, ensure your phone is connected to the vehicle via USB cable. Connecting to smartphone via USB 1. Connect your smartphone with the vehi-
cle via USB cable. NOTICE For smartphone related inquiries, please visit MyUVO.com. 4-6 I UVO eServices 911 Connect 911 Connect If an airbag deploys, your vehicle automat-
ically initiates a call to 9-1-1 and sends your vehicles location information to the 9-1-1 operator. The 911 Connect feature is available only when the mobile phone is connected via Bluetooth. By default, this feature is turned off. To turn it on, you must turn it on in the eServices Settings menu. By enabling this feature, you are agreeing to the 911 Connect terms of use.
) icon is displayed at the top of the A (
touch screen as shown below when phone is connected to UVO eServices system via Bluetooth and the 911 connect feature is turned on. Initiating a 911 Call If an airbag deploys, the following screen is displayed and a call is automatically placed to 9-1-1 after 10 seconds. Once a call is connected with a 9-1-1 operator, it is possible to request emer-
gency services to be dispatched to your location. 4 0 911 Connect I 4-7 The 9-1-1 operator may request informa-
tion on the current location of your vehicle. When the 9-1-1 operator requests your vehicle location, Sending Location is displayed on the screen and the vehicle location is automatically sent to the 9-1-1 operator. When the 9-1-1 operator attempts to talk to the driver again, the call time is dis-
played and allows the driver to speak with the 9-1-1 operator. Roadside Assist Roadside Assist If there is any issues in the vehicle, you can connect with a Roadside Assist agent. The Roadside Assist feature can be used only when your phone is connected via Bluetooth. Press the UVO key Roadside Assist
. 4-8 I UVO eServices Vehicle Diagnostics Press the UVO key Vehicle Diagnostics . Conducting Vehicle Diagnostics Vehicle Diagnostics is available only when the ignition is turned on and the vehicle is parked. It also requires that UVO eServices is activated, and the Phone is connected via USB cable before starting Vehicle Diagnostics. If diagnostic issues are found, press the Send Report button to send to your MyUVO account or press the Schedule Service but-
ton to schedule an appointment with your preferred or nearby Kia dealer. The Vehicle Diagnostics process will begin. When a diagnostics check is in progress, keep the vehicle in park with the ignition on. To cancel diagnostics, press the button on the touch screen or Cancel any hardkey. 4 0 Vehicle Diagnostics I 4-9 Schedule Service When scheduling an appointment using the Schedule Service button, pressing the Preferred button will allow you to request an appointment with your preferred Kia dealer and send your vehicles diagnostics infor-
mation. Pressing the Nearest button will allow you to request an appointment with the near-
est Kia dealer and send your vehicles diagnostics information. Press the Preferred or Nearest button. Send Report Press the Send Report in the vehicle diag-
nostics result screen. Request an appointment with Preferred or Nearest Kia Dealer and send your vehi-
cles diagnostics data. Vehicle Diagnostics Data is transmitted to your account and you can see the report on MyUVO.com 4-10 I UVO eServices Even if diagnostic issues are not found after Vehicle Diagnostics, it is recom-
mended that you send the diagnostic results to your MyUVO account. Press the Send Report button to send the diagnostics results to your MyUVO account. Scheduled Diagnostics If you have set up Scheduled Diagnostics on your UVO eServices App, a vehicle diagnostics check will automatically start on the day you selected. On the date of the Scheduled Diagnostics, the following window will be displayed. Press the Send Report button to see the Vehicle Health Report on MyUVO.com. Press the Yes to proceed with diagnostics. button on the touch screen 4 0 Vehicle Diagnostics I 4-11 Press the UVO key My Car Zone Curfew Limit Alerts History Speed Alerts History My Car Zone My Car Zone is a feature that provides alerts and driving history for Curfew Limit Alerts and Speed Alerts set by the user. Name Description Curfew Limit Alert Speed Alert Curfew Limit Alerts are alerts that are triggered when a driver is driving within a predefined time range. Speed Alerts are alerts that are triggered when a driver exceeds the predefined maximum speed. My Car Zone features are supported only when UVO eServices has been activated. Automatic Diagnostics If a critical diagnostics issue with your vehicles powertrain is detected, Automatic Diagnostics will be notified. NOTICE The screen messages differ based on the vehicle diagnostics severity. Ensure your phone is connected to the system via USB cable before using Schedule Service and Send Report . 4-12 I UVO eServices Curfew Limit Alert Curfew Limit Alert You can check the Curfew Limit Alert his-
tory for a list of past triggered curfew alerts. Speed Alert You can check the Speed Alert history for triggered speed limit alerts of the vehicle. Speed Alert Name Description Name Description Phone Alert Time Duration Driving Time Name of phone con-
nected upon triggered curfew limit Initial alert time Total duration of driving while curfew limit was triggered Total driving time from turning ignition on until turning ignition off Phone Max. Speed Alert Time Duration Name of phone con-
nected upon triggered speed limit alert Maximum vehicle speed upon triggered speed limit alert Time from first triggered alert until last triggered alert Total triggered alert time from turning ignition on to turning ignition off 4 0 My Car Zone I 4-13 To check My Car Zone alert history from your smartphone, you must first send the alert history to your MyUVO account. Parking Minder Sending Parking Location The location where your vehicle is currently parked can be sent to your smartphone. Ensure that your smartphone is connected via USB and the UVO eServices App is running before using this feature. After parking the vehicle, press the UVO key Parking Minder to send the vehicles location to your smartphone. Once the parking location has been sent, you can view your vehicles location from the UVO eServices App on your smart-
phone. NOTICE When the parking location is being sent, do not drive the vehicle. Ensure that you have logged into the UVO eServices App, and your phone is connected to the multimedia system via USB cable. When ignition is turned off while the phone is connected via USB, Parking Minder can be transferred automatically if the option is set up in UVO eService Settings 4-14 I UVO eServices UVO eServices Settings Refer to SETUP key UVO eServices . eServices Guide eServices Guide eServices Guide provides guidance on how to use UVO eServices. This feature is only available when the mobile phone is connected via Bluetooth. Press the UVO key eServices Guide 4 0 eServices Guide I 4-15 MEMO part.5 Navigation Basic Features Menu Destination Search Route Search Navigation Settings Troubleshooting 06 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-1 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-1 2016-11-04 3:02:15 2016-11-04 3:02:1 Navigation Basic Features Operating Navigation Screen Basic features on the map screen. Name Description Move to Places Menu. Go to the Home screen. Change the map view mode. Adjusts the volume. Zoom in the map. Set the zoom level automatically according to the guidance. Zoom out the map. Quick and easy selection of a destination and options. Enter the navigation menu screen. Touch to scroll the map. Quick and easy selection of a destination from the map screen. Set a waypoint to the current route. Save frequently used address to address book. Find a POI(Point Of Interest) around the current position. View the vehicles current position on the map screen. Navi Menu Set as Destination Add Waypoint Save POI 6-2 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-2 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-2 2016-11-04 3:02:16 2016-11-04 3:02:1 Places Changing Map View You can use this menu when the gear is in Parking mode and there is no destination set. Press the Search screen to move to Places. Touch the compass arrow icon to toggle between a map oriented to the North, ori-
ented parallel to the vehicles heading and 3D View. Navigation Volume Name Description Set the volume to mute. Turn the volume down. Turn the volume up. Slide to set the volume. Sets the volume of voice guid-
ance louder than that of audio. Please refer to Places in Destination Search for more details. Press the tion volume. button to adjust the naviga-
6 0 Basic Features I 6-3 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-3 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-3 2016-11-04 3:02:33 2016-11-04 3:02:3 Zoom In/Zoom Out Zoom the map view screen in and out. Map Scale Sets the zoom level automatically accord-
ing to the type of road. Menu Route Press screen Press Route button. button on the bottom left of the Press or to set the zoom level. Name Scale Fix Auto Scale Description Manually adjust the map scale. Change the map scale automatically depending on the type of road. Select the Route button to set Reroute , Route Options or Detour . 6-4 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-4 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-4 2016-11-04 3:02:39 2016-11-04 3:02:3 Reroute Route Options Detour The Reroute button is active only when there is an active route. You can search a route again. You can select an option from Route, Traffic Information, Freeway, Toll Roads, Ferry, HOV/Carpool Lanes, Electronic Toll or Private/Gated Roads. Press Save to save your selection. If there is a route already saved, another route will be searched. The Detour button is active only when there is an active route. Selected distance is detoured from the current location. 6 0 Menu I 6-5 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-5 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-5 2016-11-04 3:02:41 2016-11-04 3:02:4 POI Select the the screen Select the POI button. button on the bottom left of The lists of nearby gas stations are dis-
played. View Nearby POIs The list can be sorted to display in order of distance or name. Press On , Off button to set whether to show nearby POIs or not. When catego-
ries are selected, they will appear on the map. (ex. Gas Stations) Map Display Displays the direction of the map. Press or
,
. Name North Up (2D) Heading Up (2D) 3D 3D Buildings Description Displays always has north at the top of screen. Displays always shows the vehicles direction as proceeding towards the top of the screen. Shows the map in 3 dimentions. Shows or hides build-
ings on the map. 6-6 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-6 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-6 2016-11-04 3:02:43 2016-11-04 3:02:4 Name Description Call to the selected location (Phone needs to be connected via Bluetooth). Set the place as a des-
tination. Set the location as a waypoint. Set as Destination Add Waypoint Save POI Save the location. Search nearby POIs. Edit Change the shortcut POIs to display (ex. Gas Stations) Select new category to display (ex. American) Select the desired category to change. (ex Restaurants) Gas Stations is changed to American . 6 0 Menu I 6-7 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-7 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-7 2016-11-04 3:02:49 2016-11-04 3:02:4 POI Categories Press the Search button to search the POI category by name. Select the item to search. Press the History button to check the pre-
vious search result. Select the desired POI to check the loca-
tion and for detailed information. Name Description Search POI around the current position. Search POI around the destina-
tion. Active only when a routes planned. Search POI along route. Active only when a routes planned. Search POI around the current cursor when the map scrolled. Active only when the cursor position is different from the vehicle position. Search POI around the city selected. 6-8 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-8 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-8 2016-11-04 3:02:54 2016-11-04 3:02:5 Traf c Press the the screen Select the Traffic button. button on the bottom left of Traf c List Name Description Name Description Direction from the current location. Distance from the current loca-
tion (mi or km). Displays traffic info symbol based on the type of event. Description of traffic event. Additional traffic information may be dis-
played upon clicking on the Category button. Display Road Construction infor-
mation. Display Accident information. Display Slow Traffic information. Display Incident information. Display Hazardous Road Conditions information. Display Travel Information. When On Route is activated, only traffic information on your route is displayed. On the traffic list, the current traffic/road event information is displayed in order of distance. 6 0 Menu I 6-9 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-9 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-9 2016-11-04 3:02:59 2016-11-04 3:02:5 Traf c detail Name Description Symbol of traffic event. Event name of traffic information. Road name/road number includ-
ing direction. Direction and distance from the current location. Intersection where traffic event starts. Intersection where traffic event ends. Total distance of traffic event. Estimated delay time. Check the previous traffic infor-
mation. Check the next traffic information. Detour the route based on the traffic information. Select the traffic information on the traffic list to display the detailed screen as shown in the screen. Display the symbol of traffic event and arrow which indicates the road from start to end of the traffic event. Detailed infor-
mation is available on the right screen. On the traffic list, the current basic traf-
fic/road event information is displayed in order of distance. Select the combo box to change the arrangement in order of Category/
Distance. Name Description Select the combo box to arrange. Arrangement by category: Display traffic information arranged in order of traffic information event type. Arrangement by distance: Display the traffic information in order of distance closer to the current location. 6-10 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-10 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-10 2016-11-04 3:03:09 2016-11-04 3:03:0 Traf c detour If there is traffic information on the route, it is possible to detour the route using traffic information and search other routes. When the Detour button is enabled in the View Traffic Detail, press the Detour button to detour. on. Select the desired section. Check the information and press the Detour button. Press the Start Guidance button to apply the detoured sections and search other routes. 6 0 Menu I 6-11 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-11 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-11 2016-11-04 3:03:15 2016-11-04 3:03:1
1 | Users manual | Users Manual | 3.13 MiB | July 11 2017 / June 05 2018 |
Traf c Pop-up Name Description Pop-up Icon Symbol of traffic event Road Name/Road Number Distance from current location. Estimated delay time. Search detour route. View the detailed information regarding traffic event. Close the pop-up message. Set not to display pop-up on the current route. (Maintained until the destination is reset) Press Detour to change the route. Press Details for further information. On the traffic information pop-up, select detour or details to perform action. If there is red traffic flow on the route, a traffic information pop-up is displayed. On the traffic information pop-up window, brief information is displayed and Details and Detour can be selected. If you do not wish to see this pop-up dis-
played again during the current route, select Ignore All Events on This Route button on the display. 6-12 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-12 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-12 2016-11-04 3:03:17 2016-11-04 3:03:1 Save Press the the screen Select the Save . button on the bottom left of To store the location on the current map to the address book. Turn List Press the the screen Select the button on the bottom left of Turn List
. Name Description Change the name. Enter the phone number. Select the ON , OFF button to set the sound notification. Possible to register Symbol. Icon&Name , P r e s s Icon o r None to display on the map screen. Designate to the Favorite item. When the favorite is designated, press the button on the bottom of the Destination menu and request the route guide immedi-
ately. Save the setting. Turn on or off the Turn List. 6 0 Menu I 6-13 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-13 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-13 2016-11-04 3:03:25 2016-11-04 3:03:2 Destination Search Places You can enter POI Name, Address or Coordinates that you wish to search by. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select the Search Bar. Enter the POI Name, Address and Coordin-
ates of the location you want in the input window above, and press the Done button. If you press the Filter by Category button from the search result screen, it will bring you to the POI Categories screen where you can filter the search results by POI Categories. If you select a location from the search result list, it will bring you to the point. If you press the Filter by City button on the search result screen, it will bring you to the City search screen where you can filter the search results by city names. Once the destination has been identified either by POI name, address, or coordi-
nates, the map screen will be displayed. From this screen you can set the desti-
nation or add a waypoint, or add the dis-
played destination to your address book. 6-14 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-14 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-14 2016-11-04 3:03:33 2016-11-04 3:03:3 Address Set destination by address search. How to Search Address VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select the Address icon. Search criteria can be entered in any order. Example:
then Street then House No. then State City
. Name Description Select state to search. Enter house number. If you dont know the house number, press Skip button. Enter a street name. If same street names exist in other cities, the list of cities will be displayed. Select a city before entering the street name. Addresses are searched only from the selected city. Enter the address to check the location information on the map. Name Set as Destination Add Waypoint Description Set the location as a destination. Set the location as a waypoint. Save POI Save the location. Search nearby POIs. 6 0 Destination Search I 6-15 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-15 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-15 2016-11-04 3:03:38 2016-11-04 3:03:3 Previous Destinations Select from previously inputted addresses and POIs. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select the Previous Destinations icon. Press the Delete button to delete the information. Name Mark All Unmark All Delete Description Select all. Deselect all. Delete the selected item(s). Arrange by all, latest destinations, latest searched places and latest departing places. Arrange in order of date and time. Name Description All Destinations Start Points Searches Display all destinations, departing places, and searched places. Display previous desti-
nation places for route guidance. Display previous depart-
ing places for route guidance. D i s p l ay p r ev i o u s l y searched places for route guidance. But, not displayed when the searched places are set as destination. 6-16 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-16 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-16 2016-11-04 3:03:46 2016-11-04 3:03:4 Local Search VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select the Local Search icon. Runs Google Local Search. Enter the desired keywords and press the Done button. Searching is in progress. Press the Set as Destination button to start guidance. If one or more results are found, the search results are displayed. Select one of the search result. 6 0 Destination Search I 6-17 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-17 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-17 2016-11-04 3:03:52 2016-11-04 3:03:5 POI Categories VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select the POI Categories icon. Gas Stations Search for gas stations. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select the Gas Stations icon. Select the desired item in the sub-categories. Name Description Select the desired destination among the searched items and add it as a way point. Arrange in order of Distance and Name. Arrange in order of Near Current Position, Near Destination, Along Route, Near Scroll Mark and Near City Center. Select the desired destinations among the search items. Select the desired item. 6-18 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-18 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-18 2016-11-04 3:03:54 2016-11-04 3:03:5 Restaurants Search restaurants. Emergency Search emergency facilities. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select the Restaurants icon. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select the Emergency icon. Select the desired destination among the searched items. Select the desired destination among the searched items. Check the current location information and select the desired item in the sub menu (ex. Police Stations) 6 0 Destination Search I 6-19 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-19 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-19 2016-11-04 3:03:59 2016-11-04 3:03:5 Address Book Search the destination with the address book. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select the Address Book icon. If you save address in the Favorites tab, you can set destinations easily by pressing the icons such as Go Home and Office at the bottom of the Destination menu. Phone Number VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Flick the screen in up direction to scroll to the bottom row of icons in the Destination tab. Select the Phone Number to search POI by phone. Name Description Select the desired destination from the searched items. Edit the item. Register a new Address. Delete the desired item. Search destination by phone number. Select the desired group. 6-20 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-20 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-20 2016-11-04 3:04:02 2016-11-04 3:04:0 Type phone number to search. To search for a list of numbers based on a partial phone number entry, enter a few numbers and press Done to narrow the search results. Freeway Exit/Entrance VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Freeway Exit/Entrance to search by freeway exit/entrance. Press the Set as Destination button to start guidance. Select the desired destination among the searched items. Press the Set as Destination button to start guidance. Type freeway name and exit/entrance. 6 0 Destination Search I 6-21 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-21 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-21 2016-11-04 3:04:08 2016-11-04 3:04:0 Intersection Press the MAP the Navi screen. Select the search by intersection. VOICE head unit key. Select Menu in the bottom of right of the Intersection to Coordinates Press the MAP the Navi screen. Select the Coordinates search by coordinates. VOICE head unit key. Select Menu in the bottom of right of the to Press the Set as Destination button to start guidance. Type 1st Street name, the State, 2nd Street name. 6-22 I Navigation There are two ways to search by coordi-
nates (D.M.S or Decimal Degrees). After typing coordinates, press the Done but-
ton to search. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-22 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-22 2016-11-04 3:04:10 2016-11-04 3:04:1 Favorite Places Set the route using your favorite places. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Select the Destination tab. Select from favorite places. Press the Set as Destination button to start guidance. Press the Go Home button then press the Yes button to set the Favorite Go Home. On the button where locations are not reg-
istered, the icon is displayed. When a location is registered, the button disap-
pears and the buttons 1 to 3 are displayed as your favorite places. 6 0 Destination Search I 6-23 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-23 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-23 2016-11-04 3:04:12 2016-11-04 3:04:1 Route Setting The route can be set after searching for a destination. Destination Setting After searching the destination, press the Set as Destination button to set the location as a destination. While the destination is set, the buttons Set as Destination and Add Waypoint appear. Press the desired button to change a des-
tination or add a waypoint. Office, Special 1, Special 2, and Special 3 can also be set as a Favorite using the same steps. Pressing any of the Favorite Place buttons will start the route guidance to the saved Favorite address. 6-24 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-24 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-24 2016-11-04 3:04:14 2016-11-04 3:04:1 All Routes Name Description Start Guidance Route Options Route Info. Edit Route Total Freeway Toll Road Ferry Display total distance, travel time. Select the desired route. Start the guidance with the route. Change the route option. You can check route information. Edit the route. Display total distance of the route. D i s p l ay l e n g t h o f freeway on the route. Display length of toll road on the route. Display length of Ferry route on the route. When the alternative routes option is enabled in navigation setting, two routing options are displayed based on faster time and shorter distance. Faster Time: Select time-optimized route, being the fastest roads. Shorter Distance: Select short distance, irrespective of how fast or slow progress will be calculated. The route will be calculated using the option Faster Time by default. Alternative routes can be suggested if SETUP key Navigation Icon necessary, Route Alternative: ON 6 0 Destination Search I 6-25 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-25 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-25 2016-11-04 3:04:15 2016-11-04 3:04:1 Adding Waypoint Registering Location Press the Add Waypoint button to set the position as a waypoint and search the route. Name Description Done Add Waypoint Display the selected point on the map screen. Move the selected item up. Move the selected item down. Delete the selected item. Press the button to fin-
ish editing. Press the button to add waypoint. Save at the desired location to Press register the location. Enter the detailed information of the loca-
tion to save. 6-26 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-26 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-26 2016-11-04 3:04:25 2016-11-04 3:04:2 Route Guidance Show route guidance detailed information. Route Guidance Screen Arrival Time: Display the estimated time of arrival. Remaining Time: Display the time remain-
ing until destination. Name Description Displays the distance and direction to the first turn point. Displays the distance and direction to the second turn point. Displays the lane infor-
mation at the current location. Display the recommended direc-
tion in white, travelable direction in white, and the non-travelable direction in grey. Displays the distance to the destination and the estimated time of arrival. Press the button to check the detailed information. If no way-
point is set, you will see the remaining distance or estimated time of arrival in turn each time you click the button. Cancel the route. Enter the navigation menu screen. Displays the destina-
tion information. Turn on or off the Turn List. Cancel Route Navi Menu Destination Info Turn List 6 0 Destination Search I 6-27 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-27 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-27 2016-11-04 3:04:31 2016-11-04 3:04:3 Split Screen during Route Guidance Detailed information for POIs around free-
way exit is listed by pressing POI symbols. Details additional info can be displayed on Freeway. Additional info of Freeway exit or Rest area can be displayed by pressing the but-
ton Details . Approaching the turning point, the detailed road and travel information is automatically displayed on the right side of the screen. Name Description Turn Point: Displays direction and shape to turn shortly. Distance to tur n:
Displays distance to next turn point. Road name to maneu-
ver: Info of the road. Detail Distance Bar:
Displays distance to next turn point. 6-28 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-28 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-28 2016-11-04 3:04:40 2016-11-04 3:04:4 Route Search Canceling Route Cancel the route. VOICE head unit key. Select Press the MAP Menu in the bottom of right of the the Navi screen. Press the Route tab. Select Cancel Route . Display Route Information VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Press the Route tab. Select Route Info. Press the Route Info. icon. Press the Cancel Route icon. Press the Yes button to cancel the route. Check the information on the map. Select the desired item to see the map informa-
tion. Avoiding a road Click the Avoid Street button to avoid the street or road. 6 0 Check the desired item and press the Done button to finish. Route Search I 6-29 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-29 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-29 2016-11-04 3:04:44 2016-11-04 3:04:4 Route Overview Check the information on route including the distance, estimated time, toll fees, etc. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Press the Route tab. Select Route Overview . Route Preview Check the detailed turn-by-turn list. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Press the Route tab. Select Route Preview . Name Description Route Options Route Info. Edit Route Change the search option. You can check route information. Edit the current route. Press the Route Overview icon. Press the Route Preview icon. 6-30 I Navigation K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-30 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-30 2016-11-04 3:04:46 2016-11-04 3:04:4 Editing Route Edit the current route. VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Press the Route tab. Select Edit Route . Name Departure Place Previous Forward Destination Section Displaying Bar Description Move to the departure location. Move to the previous maneuver. M ove t o t h e n ex t maneuver. Move to the destina-
tion location. Touch bar to move to the specific position. Close the route pre-
view. Press the Edit Route icon. Name Description Done Add Waypoint Display the selected point on the map screen. Move the selected item up. Move the selected item down. Delete the selected item. Press the button to finish editing. Press the button to add an waypoint. 6 0 Route Search I 6-31 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-31 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-31 2016-11-04 3:04:51 2016-11-04 3:04:5 Route Options VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Press the Route tab. Select Route Options . Avoid Street Search new route by avoiding the selected street(s). VOICE head unit key. Select Press the MAP the Navi Menu in the bottom of right of the screen. Press the Route tab. Select Avoid Street
. Add the waypoint through various search-
ing methods. Press the Route Options icon. Press the Avoid Street icon. 6-32 I Navigation Determine the route options to guide the route. Press the Done to plan new route after selecting the street(s) that you want to avoid. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-32 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-32 2016-11-04 3:05:04 2016-11-04 3:05:0 Navigation Settings General Change general settings. Display Change the display map settings. Press the GPS Information to display the detail GPS satellites information. Name Receiving Speed Location Elevation Time Date Description Active when current posi-
tion is being calculated. Display current speed of the vehicle. Display current position of the vehicle. Display current elevation of the vehicle. Display time. Display date. Name Description Unit Show Previous Destinations after Navigation Start-Up Change the unit of mile , km . Press the ON , OFF button to change the previous desti-
nation view setting when starting the navigation. GPS Information C h e ck t h e G P S information. Press the Restore factory settings Restore factory settings button to initialize. Change the map colors and the route guidance line colors. Change the vehicle symbol. 6 0 Navigation Settings I 6-33 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-33 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-33 2016-11-04 3:05:06 2016-11-04 3:05:0 Guidance Change the guidance setting. Route Change the route setting. Traf c Change the traffic information setting. Name Number of Guidance Prompts Fewer More Curve Alert Speed Limit Description Set the frequency of guidance. Route guidance is given less frequently. Guidance will be pro-
vided frequently. Change whether to turn curve alert ON and OFF . Change whether to show speed limit by pressing ON and OFF . 6-34 I Navigation Press the ON or OFF button to change the Alternative Routes setting. Press the ON or OFF button to change the settings. Alternative on: Alternative routes will be suggested (depending on the route preference between Faster time and Shorter Distance). NOTICE Alternative routes can be shown only while the vehicle is not moving. Alternative off: No alternative routes will be suggested. Guidance will start right after calculating with the route prefer-
ence (Faster time or Shorter distance). Show Traffic Information On/Off: Select whether to display traffic information or not. Traffic Event Pop-up Freeway On/Off:
Select whether to display Pop-up mes-
sage for traffic information on freeway. Traffic Event Pop-up Surface Road On/
Off: Select whether to display Pop-up message for traffic information on sur-
face road. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-34 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-34 2016-11-04 3:05:17 2016-11-04 3:05:1 Troubleshooting The current position as shown on the navigation may differ from the actual position under the following conditions. The following occurrences are not malfunctions :
When driving on Y-shaped roads with narrow angles the current position may be displayed in the opposite direction When driving under slippery condi-
tions, such as heavy sand, snow, etc. When driving on spiral-shaped roads When the tires have recently been replaced (Especially upon use of spare or studless tires). Within city streets, the current posi-
tion may be displayed on the oppo-
site side or on an off-road position When changing the zoom level from maximum to a different level, the current position may become displayed on a different road If the vehicle is loaded onto a ferry or a car transport vehicle, the cur-
rent position may become stalled on the last position prior to loading When driving on a spiral-shaped road When driving in mountain regions with sharp turns or sudden brakes When entering a road after passing an underground parking structure, building parking structure, or roads with many rotations When driving in heavy traffic with frequent starts and stops When using tires of improper size When the tire pressure for the 4 tires are different When the replacement tire is worn or used (Especially studless tires hav-
ing passed a second season). When driving near high-rise buildings When a roof carrier has been installed When a long distance route is calcu-
lated while driving on an expressway In such cases, continued driving will automatically enable the system to conduct map matching or use updated GPS information to pro-
vide the current position (In such cases, up to several minutes may be required) Correct route guidance may not occur due to search conditions or driving position. The following occurrences are not malfunctions :
Guidance to go straight may be given while driving on a straight road Route guidance signaling entrance into a No-entry zone may occur (No-entry zone, road under construction, etc.) Guidance may not be given even when having turned at an inter-
section There are certain intersections in which guidance may not occur A route guidance signaling for a u-turn may occur in some No u-turn intersections Guidance may be given to a posi-
tion that is not the actual destina-
tion if roads to reach the actual destination do not exist or are too narrow Faulty voice guidance may be given if the vehicle breaks away from the designated route. (e.g. if a turn is made at an intersection while the navigation provided guidance to go straight.) These situations may occur after conducting route calculation. The following occurrences are not malfunctions :
Guidance may be given to a position differing from the current position when turning at an inter-
section When driving in high speeds, route recalculation may take a longer period of time Route guidance signaling for a u-turn may occur in some No u-turn intersections Route guidance signaling entrance into No-entry zone may occur.
(No-entry zone, road under construc-
tion, etc.) Guidance may be given to a position removed from the actual destination if roads to reach the actual destina-
tion do not exist or are too narrow Faulty voice guidance may be given if the vehicle breaks away from the designated route (e.g. If a turn is made at an intersection while the navigation provided guidance to go straight.) 6 0 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-35 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-35 2016-11-04 3:05:22 2016-11-04 3:05:2 Troubleshooting I 6-35 END USER LICENSE AGREEMENT END USER LICENSE AGREEMENT PLEASE READ THIS END USER LICENSE AGREEMENT (EULA) CAREFULLY BEFORE USING THE NAVIGATION SYSTEM. PLEASE READ THIS END USER LICENSE AGREEMENT (EULA) CAREFULLY BEFORE USING THE NAVIGATION SYSTEM. This is a license agreement between you and Hyundai MnSoft, INC. including its affiliates (COMPANY) regarding a copy of the COMPANY navigable map database together with associated software, media and explanatory printed documentation published by COMPANY(jointly the Product). The Product is provided for your personal, internal use only and not for resale. It is protected by copyright and is subject to the following terms which are agreed to by you, on the one hand, and COMPANY and its licensors (and their licensors and suppliers) (collectively, Licensors) on the other hand. By using the Product, you accept and agree to all terms and conditions in this End User License Agreement (EULA). IF YOU DO NOT AGREE TO THE TERMS OF THIS EULA, YOU MUST PROMPTLY EXIT THE PRODUCT OPERATION PROGRAM AND DO NOT USE OR ACCESS TO THE PRODUCT. YOU AGREE THAT YOUR RIGHTS UNDER THIS EULA MAY BE TERMINATED AUTOMATICALLY WITHOUT NOTICE IF YOU FAIL TO COMPLY WITH ANY TERM(S) OF THIS EULA. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-36 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-36 2016-11-04 3:05:22 2016-11-04 3:05:2 Terms and Conditions Personal Use Only. You agree to use this Product together with COMPANYs authorized application for the solely personal, non-commer-
cial purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes. Accordingly, but subject to the restrictions set forth in the following paragraphs, you agree not to otherwise reproduce, copy, modify, decompile, disassemble, create any derivative works of, or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws. You may not assign this EULA or any of the rights or licenses granted under this EULA, except when installed in the system for which it was created. Restrictions. Except where you have been specifically licensed to do so by COMPANY, and without limiting the preceding paragraph, you may not use the Product (i) with any products, systems, or applications installed or otherwise connected to or in communication with vehi-
cles, capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet management or similar applications; or (ii) with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without lim-
itation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs. COPYING OR USE OF THE PRODUCT EXCEPT AS PERMITTED BY THIS EULA IS UNAUTHORIZED AND IS COPYRIGHT COPYING OR USE OF THE PRODUCT EXCEPT AS PERMITTED BY THIS EULA IS UNAUTHORIZED AND IS COPYRIGHT INFRINGEMENT UNDER THE LAWS OF YOUR COUNTRY. IF YOU COPY OR USE THE PRODUCT WITHOUT COMPANYS INFRINGEMENT UNDER THE LAWS OF YOUR COUNTRY. IF YOU COPY OR USE THE PRODUCT WITHOUT COMPANYS PERMISSION, EXCEPT AS PERMITTED BY THIS EULA, YOU ARE VIOLATING THE LAW AND LIABLE TO COMPANY AND ITS PERMISSION, EXCEPT AS PERMITTED BY THIS EULA, YOU ARE VIOLATING THE LAW AND LIABLE TO COMPANY AND ITS LICENSORS FOR DAMAGES, AND YOU MAY BE SUBJECT TO CRIMINAL PENALTIES. LICENSORS FOR DAMAGES, AND YOU MAY BE SUBJECT TO CRIMINAL PENALTIES. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-37 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-37 2016-11-04 3:05:22 2016-11-04 3:05:2 THE PRODUCT MAY INCLUDE ENFORCEMENT TECHNOLOGY DESIGNED TO PREVENT (i) UNAUTHORIZED COPYING OF THE PRODUCT ONTO PHYSICAL STORAGE MEDIA OR VIA TRANSFER OVER THE INTERNET OR OTHER ELECTRONIC COMMUNICATION MEANS AND/OR (ii) ILLEGAL USAGE OF THE PRODUCT OTHER THAN BY A SPECIFICALLY AHTORIZED DEVICE. YOU AGREE THAT COMPANY MAY USE THESE MEASURES TO PROTECT COMPANY AND THE LICENSORS AGAINST COPYRIGHT INFRINGEMENT. Uploads. The Product may provide functionality through which you are able to upload certain information about your use of the Product
(collectively, Uploads) to COMPANYs servers or receive other services from COMPANY (collectively, the Services). If you use such functionality, you authorize COMPANY to retain your Uploads on its servers. COMPANY will have no obligation to provide any Services, may change the form and nature of any Services at any time with or without notice to you, will have no liability whatsoever to you for any failure of the Product or Services to transmit your Uploads to or from COMPANYs servers, may cease providing any Services at any time with or without notice to you, and will have no obligation to retain your Uploads (or any other materials you may provide to COMPANY) on its servers or return your Uploads (or any other materials you may provide to COMPANY) to you before deleting them from its servers. Storage. The Product may provide functionality through which you are able to store information (such as images) on the device on which you are using the Product. COMPANY will have no liability whatsoever to you or any third party for any failure of the Product to store any such information on such device. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-38 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-38 2016-11-04 3:05:22 2016-11-04 3:05:2 Personal Information. By using the Product, you agree to the collection, retention and processing of your personal data (including the loca-
tion of your mobile device) by COMPANY and to the storage and processing of such personal information on computers located outside of the country in which you reside. Even though COMPANY has taken steps intended to protect your personal information from being intercepted, accessed, used, or disclosed by unauthorized persons, COMPANY cannot fully eliminate security risks associated with your personal information and cannot guarantee that its systems will not be breached. See [*] for additional information regarding COMPANYs use of your personal information. WARNING. WARNING. THE PRODUCT REFLECTS REALITY AS EXISTING BEFORE YOU RECEIVED THE PRODUCT AND IT COMPRISES THE PRODUCT REFLECTS REALITY AS EXISTING BEFORE YOU RECEIVED THE PRODUCT AND IT COMPRISES DATA AND INFORMATION FROM GOVERNMENT OTHER SOURCES. ACCORDINGLY, THE PRODUCT MAY CONTAIN INACCURATE DATA AND INFORMATION FROM GOVERNMENT OTHER SOURCES. ACCORDINGLY, THE PRODUCT MAY CONTAIN INACCURATE OR INCOMPLETE INFORMATION DUE TO THE PASSAGE OF TIME, CHANGING CIRCUMSTANCES, SOURCES USED AND OR INCOMPLETE INFORMATION DUE TO THE PASSAGE OF TIME, CHANGING CIRCUMSTANCES, SOURCES USED AND THE NATURE OF COLLECTING COMPREHENSIVE GEOGRAPHIC PRODUCT, ANY OF WHICH MAY LEAD TO INCORRECT THE NATURE OF COLLECTING COMPREHENSIVE GEOGRAPHIC PRODUCT, ANY OF WHICH MAY LEAD TO INCORRECT RESULTS. THE PRODUCT AND SERVICES MAY NOT TO BE USED FOR SAFETY OF LIFE APPLICATIONS, OR FOR ANY OTHER RESULTS. THE PRODUCT AND SERVICES MAY NOT TO BE USED FOR SAFETY OF LIFE APPLICATIONS, OR FOR ANY OTHER APPLICATION IN WHICH THE ACCURACY OR RELIABILITY OF THE PRODUCT OR SERVICES COULD CREATE A SITUATION APPLICATION IN WHICH THE ACCURACY OR RELIABILITY OF THE PRODUCT OR SERVICES COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. DO NOT ATTEMPT TO CONFIGURE THE PRODUCT OR INPUT WHERE PERSONAL INJURY OR DEATH MAY OCCUR. DO NOT ATTEMPT TO CONFIGURE THE PRODUCT OR INPUT INFORMATION WHILE DRIVING. FAILURE TO PAY FULL ATTENTION TO THE OPERATION OF YOUR VEHICLE COULD RESULT IN INFORMATION WHILE DRIVING. FAILURE TO PAY FULL ATTENTION TO THE OPERATION OF YOUR VEHICLE COULD RESULT IN DEATH, SERIOUS INJURY, OR PROPERTY DAMAGE. BY USING THE PRODUCT, YOU ASSUME ALL RESPONSIBILITY AND RISK. DEATH, SERIOUS INJURY, OR PROPERTY DAMAGE. BY USING THE PRODUCT, YOU ASSUME ALL RESPONSIBILITY AND RISK. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-39 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-39 2016-11-04 3:05:22 2016-11-04 3:05:2 Disclaimer of Warranty. The Product is provided to you as is, and you agree to use it at your own risk. SUBJECT TO THE APPLICABLE LAWS, COMPANY AND THE LICENSORS MAKE NO GUARANTEES, REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO, CONTENT, QUALITY, ACCURACY, COMPLETENESS, EFFECTIVENESS, RELIABILITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, USEFULNESS, USE OR RESULTS TO BE OBTAINED FROM THE PRODUCT, OR THAT THE PRODUCT OR SERVER WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT ERRORS IN THE PRODUCT OR NONCONFORMITY TO ITS DOCUMENTATION CAN OR WILL BE CORRECTED. YOU ACKNOWLEDGE THAT THE PROVISIONS OF THIS SECTION ARE A MATERIAL INDUCEMENT AND CONSIDERATION TO COMPANY AND THE LICENSORS TO GRANT THE LICENSE CONTAINED IN THIS EULA AND TO PROVIDE YOU WITH ACCESS TO THE SERVICES. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED UNDER THE APPLICABLE LAWS, COMPANY AND THE LICENSORS SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, INCURRED BY YOU OR ANY THIRD PARTY WHICH MAY ARISE IN CONNECTION WITH OR RESULT FROM THE USE OR POSSESSION OF THE PRODUCT; OR FOR ANY LOSS OF DATA, PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THE PRODUCT, ANY DEFECT IN THE PRODUCT, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF COMPANY OR THE LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND NOTWITHSTANDING THE FAILURE OF ANY LIMITED REMEDY PROVIDED HEREIN. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-40 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-40 2016-11-04 3:05:22 2016-11-04 3:05:2 Exclusions. Some jurisdictions do not allow certain warranty exclusions or the limitation or exclusion of liability, so to that extent the above exclusion may not apply to you. To the extent that COMPANY may not, as a matter of applicable law, disclaim any implied warranty or limit its liabilities, the scope and duration of such warranty and the extent of COMPANYs liability shall be the minimum permitted under such applicable law. The disclaimer of warranty and limitation of liability set forth in this EULA does not affect or prejudice your statutory rights where you have acquired the Product otherwise than in the course of business. Third-Party Copyright Notices. The third-party sourced data has been incorporated into or made a part of the Product and is being subli-
censed to you subject to the terms and conditions of this EULA. In this regard, you shall not remove or tamper with any intellectual prop-
erty rights notice attached or used in relation to data supplied by the Licensors. Entire Agreement. This EULA is the entire agreement between COMPANY (and the Licensors) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all previous written or oral communications or documents (including, if you are obtaining an update, any agreement that may have been included with an earlier version of the Product) with respect to such subject matter. Governing Law. This EULA shall be governed by the laws of the jurisdiction in which you reside at the date of acquisition of the Product. Should you at that moment reside outside the European Union or Switzerland, the law of the jurisdiction within the European Union or Switzerland where you acquired the Product shall apply. In all other cases, or if the jurisdiction where you acquired the Product cannot be defined, the laws of the Republic of Korea shall apply. This EULA will not be governed by the U.N. Convention on Contracts for the International Sale of Goods. The courts competent at your place of residence at the time you acquired the Product shall have jurisdiction over any dispute arising out of, or relating to this EULA, without prejudice to COMPANYs right to bring claims at your then current place of residence. Export Control. You agree not to export or re-export from anywhere any part of the Product in any form except in compliance with appli-
cable export laws, rules and regulations, including but not limited to the laws, rules and regulations administered by the Office of Foreign Assets Control of the U.S. Department of Commerce and the Bureau of Industry and Security of the U.S. Department of Commerce. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-41 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-41 2016-11-04 3:05:22 2016-11-04 3:05:2 Miscellaneous. If any provision of this EULA is found to be invalid or unenforceable, it will be enforced to the extent permissible and the remainder of this EULA will remain in full force and effect. Failure by COMPANY to prosecute any right with respect to a default hereun-
der will not constitute a waiver by COMPANY of the right to enforce rights with respect to the same or any other breach. No refunds or replacements will be permitted on damaged Product. U.S. Government End Users. If the Product is being acquired by or on behalf of the United States Government or any other entity seek-
ing or applying rights similar to those customarily claimed by the United States Government, this Product and related documentation are Commercial Items as that term is defined at 48 C.F.R. (FAR) 2.101. This Product and related documentation are licensed to the United States Government end users (a) only as Commercial Items and (b) with only those rights as are granted to all other end users in accor-
dance with this EULA, and each copy of Product delivered or otherwise furnished shall be marked and embedded as appropriate with the following Notice of Use, and shall be treated in accordance with such Notice:
NOTICE OF USE NOTICE OF USE CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: Hyundai MnSoft, Inc. CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 74 Wonhyo-ro, Yongsan-gu, Seoul 140-711, Republic of Korea This Product and related documentation are commercial items as defined in FAR 2.101 and is subject to this EULA under which this Product is provided. 2013 Hyundai MnSoft. All rights reserved. If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Of-
ficer, federal government agency, or any federal official must notify COMPANY prior to seeking additional or alternative rights in the Prod-
uct. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-42 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-42 2016-11-04 3:05:22 2016-11-04 3:05:2 End-User Terms Required by HERE. The Product utilizes map data that COMPANY licenses from HERE and the following copyright notices apply to such map data (the HERE Data): 2013 HERE. All rights reserved. The HERE Data for areas of Canada includes information taken with permission from Canadian authorities, including: Her Majesty the Queen in Right of Canada, Queens Printer for Ontario, Canada Post Corporation, GeoBase , Department of Natural Resources Canada. All rights reserved. HERE holds a non-exclusive license from the United States Postal Service to publish and sell ZIP+4 information. United States Postal Service 2010. Prices are not established, controlled or approved by the United States Postal Service. The fol-
lowing trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4. The HERE Data for Mexico includes certain data from Instituto Nacional de Estadstica y Geografa. Austria: Bundesamt fr Eich- und Vermessungswesen Croatia, Cyprus, Estonia, Latvia, Lithuania, Moldova, Poland, Slovenia and/or Ukraine: EuroGeographics France: source: IGN 2009 BD TOPO Germany: Die Grundlagendaten wurden mit Genehmigung der zustaendigen Behoerden entnommen Great Britain: Contains Ordinance Survey data Crown copyright and database right 2010, and Royal Mail data Royal Mail copyright and database right 2010. Greece: Copyright Geomatics Ltd. Italy: La Banca Dati Italiana stata prodotta usando quale riferimento anche cartografia numerica ed al tratto prodotta e fornita dalla Regione Toscana. Norway: Copyright 2000; Norwegian Mapping Authority Portugal : Source: IgeoE Portugal Spain: Informacin geogrfica propiedad del CNIG Sweden: Based upon electronic data National Land Survey Sweden Switzerland: Topografische Grundlage: Bundesamt fr Landestopographie K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-43 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-43 2016-11-04 3:05:22 2016-11-04 3:05:2 United Kingdom: Contains public sector information licensed under the Open Government Licence v1.0 (see for the license http://www. nationalarchives.gov.uk/doc/open-government-licence/) and is adapted from data from the office for National Statistics licensed under the Open Government Licence v.1.0. Israel: Survey of Israel data source Jordan: Royal Jordanian Geographic Centre. The foregoing notice requirement for Jordan Data is a material term of the Agreement. If Client or any of its permitted sublicensees (if any) fail to meet such requirement, HERE shall have the right to terminate Clients license with respect to the Jordan Data. Mozambique: Certain Data for Mozambique provided by Cenacarta 20XX by Cenacarta Runion: source: IGN 2009 - BD TOPO End-User Terms Required by ZENRIN. The Product utilizes map data that COMPANY licenses from ZENRIN and the following copyright notices apply to such map data (the ZENRIN Data):
Europe: Junction View Data provided by ZENRIN CO., LTD. Copyright 20XX, All Rights Reserved. Europe: Junction View Data and Exit View Data provided by ZENRIN CO., LTD. Copyright 20XX, All Rights Reserved. North America: Junction View Data provided by ZENRIN USA, INC. Copyright 20XX, All Rights Reserved; Junction View Data fourni par ZENRIN USA, INC. Copyright 20XX. Tous droits rservs; Las imgenes de las rutas alternas son provedas por ZENRIN USA, INC. Copyright 20XX. Todos los derechos reservados. 2013 Hyundai MnSoft. All rights reserved. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-44 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-44 2016-11-04 3:05:22 2016-11-04 3:05:2 The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product. Copyright for Brand Icon Copyright for Brand Icon Junction View Data provided by ZENRIN USA, INC. Copyright(C) 20XX, All rights Reserved. Copyright for Junction View Copyright for Junction View K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-45 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-45 2016-11-04 3:05:22 2016-11-04 3:05:2 About Map Updates About Map Updates You can contact your KIA dealer or call at 1-888-757-0010. Information Information This product requires regular updates for software corrections, new functions and map updates. Updating may require up to 1 hour depending on the data size. Turning off the power or ejecting the SD card during the update process may result in data loss. Make sure to keep the ignition on and wait until updating is complete. CAUTION CAUTION Please use only the SD card that was included with the vehicle purchase. The use of a separately purchased SD card may result in damage due to heat related deformation. Product malfunctions caused by the use of separately purchased SD cards shall not be covered within the product warranty. Repeatedly connecting/disconnecting the SD card in a short period of time may cause damage to the device. K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-46 K_DE 16_G4.0[USA_EU]AVN_PART6.indd 6-46 2016-11-04 3:05:22 2016-11-04 3:05:2 part.6 Voice Recognition What is Voice Recognition?
Precautions Required for Successful Voice Recognition Starting/Ending and Setting Voice Recognition Voice Recognition Screen Overview Voice Commands Siri Eyes Free Voice Recognition What is Voice Recognition?
The voice recognition feature operates the multimedia system by recognizing voice commands and enables hands-free oper-
ation of the system while you are driving your car. Not all possible voice commands are rec-
ognized by the system due to technological limitations. To make up for these limitations, the system displays the voice commands that are available for you to use. There are errors in communication between people. Likewise, voice recognition some-
times misunderstands your voice command in some circumstances. If this happens, either check the screen for the available options and say the command again, or manually select and press the button for the corresponding command on the screen. Precautions Required for Successful Voice Recognition 1. Voice recognition supports only the commands that are displayed on the screen and written in the User's Guide. 2. To ensure the correct recognition and execution of your command, say your command when you hear the beep after a voice prompt. 3. Voice recognition automatically ends if:
1) A call is incoming or outgoing 2) A media device (USB or iPod, etc.) is connected or disconnected 3) The rear view camera is operated 4) The car engine starts or stops 5) A system key, such as RADIO key or MEDIA key is selected 4. The microphone used for the voice recognition system is located in the headliner directly above the driver's head. To make your commands better understood, keep your body straight in the driver's seat when speaking the command. 5. Speaking naturally and clearly will ensure better recognition of your voice commands. 6. In the following cases voice recognition will be affected by ambient noise. 1) The sound of the wind if any window or the sun roof is open. 2) High speed blower from the air vents. Set climate control to blow lower than level 3. 3) Vibrations from passing through a tunnel. 4) Vibrations from driving on an uneven road. 5) Storms and heavy rain. 5-2 I Voice Recognition Starting/Ending and Setting Voice Recognition Starting Voice Recognition Press the key briefly (less than 0.8 seconds) on the steering wheel control to activate voice recognition. Ending Voice Recognition 1. Select Exit to the left of the bottom to end voice recognition. 2. Press and hold (more than 0.8 sec-
key on the steering onds) the wheel control to end voice recognition. Combining Voice Recognition with On-Screen Commands After pressing the key, say a com-
mand after the beep. The voice recognition system will execute the desired operation after understanding the command. Alternatively, you may touch any of the corresponding Commands on the screen while the Voice Recognition system is in operation. Combining voice recognition with available on-screen commands is useful when the system is taking longer than expected or the voice command did not execute as desired. 5 0 Starting/Ending and Setting Voice Recognition I 5-3 Extending the Listening Time When the system is waiting for your com-
mand, after the voice prompt and beep have been heard, if you press the key (less than 0.8 seconds), then the beep will sound again and standby mode will restart. When activated, voice recognition waits for your command for 5 seconds. If you say nothing for 5 seconds, a voice prompt will ask for your command again. 5-4 I Voice Recognition Skipping Prompt Messages When you hear the prompt message, key on the steering press the wheel control to skip the message and go directly to listening mode to say your com-
mand. This results in faster operation when you feel the message is too long or you already know the command to use. i Information Refer to Part 8 for instructions on how to change the Voice Recognition Settings. Adjusting Voice Recognition Volume During voice recognition, rotate the vol-
ume knob to adjust the message volume. 5 0 Starting/Ending and Setting Voice Recognition I 5-5 Name Voice recognition status icons Description Standby Voice guidance Voice command process Recognized results Displays the voice rec-
ognition result. User's speaking volume being recognized Help Exit Displays the voice command volume in real time. Displays all available help commands in a tree format. Ends the voice recog-
nition. Help Display Name Description Shows the available commands. Select or say a command to display additional com-
mands in detail. This section shows how to use voice recognition for the selected item. Command list How to use for selected item How to use in general This section displays how to use voice recognition in general. Voice Recognition Screen Overview Start Screen Name Description Representative Commands Not available command Displays the represen-
tative commands. Displays commands that are not available due to a failure in meeting the conditions for using them and thus need additional settings. The conditions required for using them will be described briefly under each command. 5-6 I Voice Recognition Instructions for Using Voice Recognition i Information In the instructions screen, no voice is recognized, so you must manually issue commands. Because the instructions screen displays a lot of content, you cannot view it while driving for safety precautions. Name Description Detail instruction Close button This section describes how to use voice recog-
nition in detail. Closes the screen and restarts voice recognition. 5 0 Voice Recognition Screen Overview I 5-7 Voice Commands Types of Commands Voice recognition commands are classified as Global Commands and Local Commands. 1. Global Commands (): Commands that can be used immedi-
ately after activating voice recognition. 2. Local Commands (): Commands that can be used when a multimedia or Bluetooth function is running, or displayed on the screen, after activating voice recognition. Call Commands
* Check the following before using call commands:
1. Voice commands related to phone calls can be used after con-
necting a Bluetooth device. 2. To call a person, for example Call <John Smith> whose name is listed in Contacts, you must first download the Contacts list. For details on downloading contacts, see Part 3. Bluetooth >
Chapter 3. Bluetooth Phone > 3.10 Contacts. 3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you cannot make a call by name yet. The time it takes to convert voice data may vary depending on the number of Contacts downloaded on the phone. 5-8 I Voice Recognition Command Call Call <Name>
Call <Name>
on Mobile Call <Name>
at Work Call <Name>
at Home Call <Name>
on Other Dial Number Dial <Phone #>
Redial Call History Operation Displays downloaded Contacts, after this you can make a call by saying the name. You can directly call a person by <Name> in the downloaded Contacts. You can call a person <name> directly to the number that is saved as Mobile in the downloaded Contacts. e.g.) Call John Smith on Mobile You can call a person <name> directly to the number that is saved as Work in the down-
loaded Contacts. e.g.) Call John Smith at Work You can call a person <name> directly to the number that is saved as Home in the downloaded Contacts. e.g.) Call John Smith at Home You can call a person <name> directly to the number that is saved as Other than Mobile, Home, or Work in the downloaded Contacts. e.g.) Call John Smith on Other Displays a screen where you can say a phone number to dial. You can directly say the number to call. e.g.) Dial 111 555 1234 Directly calls at the number that you last dialed. Displays your Call History, where you can say the list number to make a call. Radio Commands Command Operation Radio FM Plays the most recent radio channels from FM, AM, and SiriusXM. Plays FM radio. FM
<87.5~107.9>
Tunes to FM <Frequency> according to what you say. e.g.) FM 87.5: FM eighty seven point five SiriusXM SiriusXM
<0~999>
AM Plays SiriusXM radio. Tunes to SiriusXM Channel <Channel Number> according to what you say. e.g.) SiriusXM 23: SiriusXM Twenty three Plays AM radio. AM <530~1710>
Preset <1~40>
Channel
<0~999>
Tunes to AM <Frequency> according to what you say. e.g.) AM 530: AM Five thirty Tunes to your preset stations (1 to 40). In SiriusXM Radio mode, turns on the
<Channel Number> that you say. 5 0 Voice Commands I 5-9 Media Commands
* Check the following before you use media commands. 1. If no media is connected or if no playable files exist at the time when you use these commands, a voice message will tell you that this is not available. 2. If you say the name of the media that is currently playing again, then that media will continue playing. e.g.) Saying USB while USB content is playing. Command Music iPod USB Bluetooth Audio AUX My Music Operation Continues the last media you played. Plays the iPod currently connected. This will work the same when an iPhone is con-
nected. If a USB is connected, then it will be played instead of the iPod. Plays the music on the USB currently con-
nected. If an iPod is connected, then the iPod will be played instead of the USB. Plays the music on the Bluetooth phone currently connected. This may not be supported depending on the Bluetooth connection status. Plays external devices that are currently connected. Plays My Music files stored in the system. 5-10 I Voice Recognition 2. Bluetooth audio/AUX Command For Bluetooth audio and external devices (AUX), local commands are unavailable, including Play, Pause, Repeat and Shuffle. 1. USB Music/iPod/My Music Command Command Play Pause Shuffle Shuffle Off Repeat Repeat Off Operation Plays a selected file. Maintains the current settings during playback. Pauses a file that is playing. Maintains current settings while paused during playback. Plays tracks or files randomly. Maintains current settings during shuffled playback. Cancels Shuffle and plays tracks sequentially. Maintains current settings during sequential playback. Plays the current track or file repeatedly. Maintains the current settings during repeat play-
back. Cancels Repeat and plays multiple tracks or files. Maintains current settings during multiple track playback. 5 0 Voice Commands I 5-11 UVO eServices Commands List Command Roadside Assist Vehicle Diagnostics eService Guide Operation Connect with a Roadside Assist agent. Informs you if diagnostic issues are found in your vehicle Provides guidance on how to use UVO eServices Other Commands List
(Commands used in List/Help) Command Operation Help Line 1~4
(One~Four) Yes/No Previous/Next Manual Input Moves to the voice recognition help screen. All available commands can then be identi-
fied and used. When you cannot select a certain name, such as in Call History, you can select it using numbers. Simple numbers can be recognized, such as One or Two. When voice recognition is activated, this command is used when an answer is requested for a confirmation question. When four or more searched items are listed, you can move to the previous or next page using a voice command. When Dial entry results are displayed, this command is used to search manually, rather than to search with a voice com-
mand. Voice recognition stops after this command is used. Go Back Exit Moves to the previous screen. Ends the voice recognition. 5-12 I Voice Recognition Siri Eyes Free How to start Siri If you want to use Siri, you have to con-
nect your iOS device to the Multimedia system through Bluetooth.
(Please check whether your iOS device supports Siri and turning Siri On) Then you can use Siri while pressing and key on the steering wheel. holding How to use Siri When you access the Siri screen while key on the pressing and holding steering wheel, you select the Speak but-
ton and then you can speak what you want. Note that the Multimedia system only supports Phone related functions. Other functions will be performed in your iOS device. If you press voice key quickly, Siri would re-start. If you hold down voice key, Siri would be terminated and the screen would go back to the previous screen. Eyes-Free mode would be acti-
vated automatically while you are driving. When shifting gears into P or putting the Parking brake on, Eyes-Free mode would be deactivated automatically. i Information Functions and feedbacks from voice commands via Siri are executed in the iOS device. If the iOS version is changed, the functions and response may be different according to the iOS device and the latest version. 5 0 Siri Eyes Free I 5-13 MEMO part.7 Apps/Info SiriusXM Data Apps/Info SiriusXM Data About SiriusXM Data Service The SiriusXM Data Service is a paid membership satellite radio service that provides users with information such as Weather, Sports, Stocks, Fuel Prices and Movies. However, weather information is not supported for vehicles pur-
chased in Canada. Accessing SiriusXM Data Select the SiriusXM Data icon after selecting All Menus or the APPS/
key to enter the SiriusXM Data mode. 6-2 I Apps/Info SiriusXM Weather Announcement At the SiriusXM Data screen, select icon to enter the Weather the Weather Announcement mode. Weather Forecast This service provides current weather information and weather forecasts for the next five days in your region. To change the region, select the Other City button and select the desired region. Warnings and Advisories This service provides weather warnings and advisories, such as tornado, storm, flood, etc. 6 0 SiriusXM Data I 6-3 Sports SiriusXM Sports Information Select the icon to enter the Sports mode. This service provides real-time updated information on scores and schedules for major sports, such as NFL, NBA, NCAA football, NCAA basketball, NHL, MLB, NASCAR and more. My Teams You can save teams which you are inter-
ested in as part of My teams to easily view related scores and schedules. Select the My Teams menu and then select the Add button to search for and register your favorite teams. Search for your favorite teams and select button on the right to add it to the the My Teams list. You can always check the list of teams that you added in the My Teams menu. button on the right side of Select the the team name to delete the team from My Teams or select the Add button to add other teams. 6-4 I Apps/Info Select the team name to check daily results and recent schedules for that team. SiriusXM Stock Information In the SiriusXM Data screen, select the Stocks icon to enter the Stocks mode. Stocks is a feature that shows the current value and change of stocks. For symbols which you are interested in, select the icon to save the symbol as a part of the Saved symbols which can be viewed from the My Favorites button on the Stocks Main screen. 6 0 SiriusXM Data I 6-5 My Favorites My Favorites shows a list of stocks added by the user. When entering the Stocks menu for the first time, a screen is dis-
played for you to add your favorite stock information. Select the Add button to move to the stock search screen. Stock Search Use the Stock Search menu to search for specific stocks. button after searching for Select the your favorite stocks to save them in My Favorites. In the My Favorites screen, you can find the selected stock information that you registered. 6-6 I Apps/Info SiriusXM Fuel Price Information At the SiriusXM Data screen, select the Fuel Prices icon to enter the Fuel Prices Information mode. Search for Nearby Stations, and Register Key Locations as Favorite Stations. Search for nearby stations with the Nearby Stations menu. It shows station locations, starting from the nearest one, and select Nearest menu on the top right side to further sort them by price or brand name. Select the button to the right of the list to register key locations as a Favorite Station so that you can go there again with the Favorite Stations menu. 6 0 SiriusXM Data I 6-7 My Fuel Type Settings With the Filters menu, you can select fuel types and favorite brands. When searching for Nearby Stations, the results will reflect selected fuel types and brand information. icon to enter the SiriusXM Movie Information Select the Movies Movie mode. You can check recent movies and nearby theaters, and also register your favorite theater locations. Search for Nearby Theaters, and Register Any Key Locations as Favorite Theaters. In the Nearby Theaters menu, you can search for any nearby theaters. It shows theaters, starting from the nearest one, and selecting the Nearest menu at the top right side will sort them by name. 6-8 I Apps/Info Select the button to the right of the list to register your favorite theater so that you can always check it again using the Favorite Theaters menu and selecting button to view the current movie the information for that theater. In the Top Movies menu, you can check for any movies that are currently popular. button to the right of a Select the movie title to view the plot summary and any other detailed information. 6 0 SiriusXM Data I 6-9 MEMO part.8 Other Features Climate Mode Camera Other Features Climate Mode Operating Climate Mode Press the CLIMATE key for the climate system to see status infor-
mation in the full screen display. While multimedia or navigation is in use, the climate system infor-
mation will be displayed over top when you control the tempera-
ture (TEMP) or turn on the air conditioner (A/C). Basic Mode Screen 7-2 I Other Features Name Description Set the temperature of the driver's seat and passenger seats Air direction Air volume Cooling/heating control status
(AUTO) Displays the configured temperature set-
tings for the driver's seat and the passenger seats. Cooling or heating will continue until the temperature matches the configured temperature settings. The internal temperaure can be con-
trolled in incrments of 1F within a range of 63F to 89F. LOW is displayed when the temperature is set to anything below 63F, and HIGH is displayed when it is set to anything above 89F. Displays the configured air direction settings. Displays the configured air volume settings Displayed when the AUTO key is pressed and cooling/heating operates automatically according to the configured temperature settings. AUTO will be turned off when you try to do the following with AUTO on:
- Control the air volume
- Control the air direction
- Turn the air conditioning (A/C) on/off
- Turn on the moisture removal function for the windshield Air conditioning control status key is pressed Displayed when the and the air conditioning starts cooling/heating. A/C Name Simultaneous tem-
perature settings for the driver's seat and the passenger seats
(SYNC) Description SYNC key is pressed Displayed when the and the temperatures of the driver's seat and the passenger seats can be config-
ured at the same time. 7 0 Climate Mode I 7-3 Camera WARNING
- Backing Up & Using Camera Never rely solely on the rear view camera when backing up. Prior to entering your vehicle always do a visual check of the area behind your vehicle, and before backing up be aware of your surroundings and supplement the rear view camera by looking over your shoulders and checking your rear view mir-
rors. Due to the difficulty of ensuring that the area behind you remains clear, always back up slowly and stop immediately if you even suspect that a person, and especially a child, might be behind you. i Information A separate chipset is used for the camera screen while booting up, so it may be different after booting up. 7-4 I Other Features Steering-linked camera This device is connected to a rear detection camera to see behind the car for safe reversing. The Rear View Camera turns on auto-
matically if you shift the gear to R when the power is on or the engine has started. While the device boots up, shift the gear to
"R" to activate the rear detection cameras. Shift the gear to another position to deac-
tivate the rear detection camera. NOTICE A wide-angle lens is installed as the rear detection camera to get a wider view, so there may be some difference between the actual distance and the distance that appears. on-screen. For safety, make sure to view the back, right, and left sides of the car for yourself. The color of the parking guidelines displayed in the picture may differ from the actual screen. When booted up, blinking may occur when you switch to a UI screen. Name Red Line Yellow Line 1 Yellow Line 2 Yellow Line 3 Yellow Line 4 Blue Line Description About 0.5 m from the rear bumper About 1 m from the rear bumper About 3 m from the rear bumper Trajectory of the wheel on the drivers side Trajectory of the wheel on the passenger side Neutral steering trajec-
tory As you reverse your car and monitor the area behind your car, the steering-linked driving trajectory and the neutral driving trajectory are both displayed. part.9 Setup Setup Sound Settings Display Settings Bluetooth Settings UVO eServices Settings Home Screen Settings Clock Settings Voice Recognition Settings Language Settings Keyboard Settings Screen Saver Settings System Info Setup Setup Setup is the screen to control Audio sys-
tem settings. To enter the screen, press the key or the Setup icon in All Menus. SETUP 8-2 I Setup Features Description Features Description Sound Display Bluetooth UVO eServices Phone projection Home Screen Provides the sound con-
trol options for Position, Bass, Mid, Treble, Volume and Advanced settings. Provides the Mode/
Illumination settings. Provides the Bluetooth Connection/Auto Connection Priority/
Bluetooth System Information settings. Provides the 911 Connect/Parking Minder/
My Car Zone/Scheduled Diagnostics/Trip Info Sync Reminder Settings. For more details, refer to Phone projection guide. Provides the function to customize the three menu items at the bottom of the Home Screen. Clock Voice Recognition Language Keyboard Screen Saver System Info Display Off Provides the Time and View settings. Provides the Guidance and Priority settings. Provides the Change Language settings. Provides settings to switch keyboard layouts. Provides the Clock/
None settings. Provides software and storage space informa-
tion. Provides the Display Off
(touch activation) func-
tion. Sound Settings Features Description Display Settings Adjusts the sound effects for the whole system. Advanced Default Beep Select additional audio options such as Speed Dependent Volume Control that automatically controls Audio volume according to vehicle speed as well as Variable EQ. Resets the sound to fac-
tory default settings. Select to activate a beep when pressing buttons. Adjusts the level of illumination for the entire system. i Information Advanced sound settings may differ according to selected AMP option. The seat shape may differ according to vehicle model. Features Description Position Tone Select the Up/Down/Left/
Right button to control sound positioning. Select Center to concen-
trate the sound on the center of vehicle. Drag the slide bar to control bass/mid/treble settings. Select Center to initialize the settings. Features Description Mode Illumination Default Display Off Select any of LCD illumi-
nation change modes:
Automatic (changes the level automatically), Daylight, and Night. Set the levels of illumina-
tion for day and night. Select Default to initialize the settings. Resets the display to fac-
tory default settings Provides the Display Off
(touch activation) function. 8 0 Setup I 8-3 Bluetooth Settings Changes Bluetooth phone settings. Bluetooth Settings Press the icon. SETUP key Select Bluetooth Bluetooth Connection Settings SETUP key Select Bluetooth Press the Select Bluetooth Connection . Features Description Paired Device List Bluetooth Audio Connection Status Bluetooth Hands-Free Connection Status Add New Delete Devices Help Displays the paired Bluetooth device list. When selecting from the list, the device is connected or discon-
nected. An icon appears when you make a Bluetooth Audio connection. An icon appears when you make a Bluetooth Hands-free connection. Register a new Bluetooth device. Select and delete a paired device. Switches to the Bluetooth Connection Help screen. 8-4 I Setup i Information Up to 5 Bluetooth devices can be paired. Only one Bluetooth device can be connected at a time. During a Bluetooth device connection, another device cannot be paired. When you delete a paired device, the Call History and Contacts stored in the head unit are also deleted. Bluetooth Hands-free and Bluetooth Audio functions are supported. Hands-free and audio-supported devices, such as a Bluetooth smartphone or audio, will function normally. When a Bluetooth device is connected, if the Bluetooth connection is unexpectedly d i s c o n n e c t e d , d u e t o b e i n g o u t o f communication range, the device powering off, or a Bluetooth communication error, the Bluetooth device automatically searches for and connects to nearby Bluetooth devices. If the system is not stable, due to a vehicle-
Bluetooth device communication error, restore the Default Factory Settings. For Default Factory Settings, the bluetooth settings are reset to factory settings. Press the SETUP key Select Bluetooth Select Default Factory Settings . Auto Connection Priority Press the Select Auto Connection Priority . SETUP key Select Bluetooth Bluetooth System Information SETUP key Select Bluetooth Press the Select Bluetooth System Info . When the engine is running, the selected Bluetooth device is automatically con-
nected. If you fail to connect the selected device, the previously-connected device is automatically connected, and if it also fails, then it tries to connect all paired devices sequentially. Depending on auto connection priority, connection to a device may take time. Features Description Vehicle Name Passkey You can change the Bluetooth device name of the vehicle. You can change the pass-
key used for Bluetooth device authentication. the initial passkey is 0000. i Information The vehicle name above is an example. Check the actual information on the product. 8 0 Setup I 8-5 911 Connect This feature is used to turn on or off the 911 Connect feature. Default Factory Settings You can delete all paired devices and restore the Default Bluetooth Settings. For Default Factory Settings, all paired devices are deleted, and the system is reset to factory settings. UVO eServices Settings Within the eServices Settings screen, UVO eServices related features can be set, such as activating 911 Connect, Parking Minder and setting the My Car Zone. For safety reasons, My Car Zone Settings cannot be adjusted while driving. Park the vehicle before making any changes to your settings. Press the SETUP key UVO eServices 8-6 I Setup When enabing this feature, you must first agree to the 911 Connect tems of use. After reading the tems of use, press the Agree button on the touch screen to accept. Parking Minder If you want to send vehicle location to your smartphone automatically when you turn the ignition off, turn the Parking Minder feature On. My Car Zone This feature is used to set My Car Zone
(Curfew Limit, Speed) alert conditions. My Car Zone Settings is unavailable when UVO eServices has not been activated. SETUP key UVO eServices Press the My Car Zone . The PIN must be entered to use My Car Zone Settings. 8 0 Setup I 8-7 This screen is used to set Curfew Limit and Speed Alert features. Set the alert conditions On Settings . Curfew Limit Alert Settings Within Curfew Limit Alert Settings, you can set the Curfew Limit Alert Start and End Time. You can also set the Alert Interval of alerts upon Curfew Limit. PIN This feature is used to change the PIN to enter My Car Zone Settings. Speed Alert Settings Within Speed Alert Settings, you can set the vehicle speed limit and Alert Interval of alerts upon overspeeding. NOTICE Before pressing Done , ensure your smartphone is connected to UVO eServices system via USB cable. 8-8 I Setup Press the Done button to transmit the new PIN to your My UVO com account. Restore Factory Settings This feature is used to restore all My Car Zone alert history and settings back to default state. Scheduled Diagnostics This feature is for setting when scheduled diagnostics alerts display. SETUP key UVO eServices Set Press the Scheduled Diagnostics On Settings NOTICE For months without the corresponding day, the last day of the month will automatically be set as the scheduled diagnostics date. 8 0 Setup I 8-9 Trip Info Sync Reminder Trip Info is a feature used to set whether system displays alert when trip info(Driv-
ing Distance, Driving Speed, Driving Time, etc). reaches 90% of memory. UVO eServices must be activated to use this feature. Home Screen Settings You can customize the three menu items at the bottom right of the Home Screen into the ones you want. On the Home Screen Settings screen, drag the menu items on the right to the area marked in red in the screen below. SETUP key Press Set Trip Info Sync Reminder On UVO eServices i Information You can select the Default button to reset to the factory default settings. 8-10 I Setup Clock Settings Configure the settings for time and date. Using the arrow buttons, you can change the values. Clock settings do not automat-
ically change when crossing into different time zones. The time must be changed manually on this screen. Voice Recognition Settings Configure how to make a call with Voice Recognition Guidance and Voice Recognition. Features Daylight Saving Time 24 Hours Direct entry Description The daylight saving time (DST) is applied. The time display is set in 24-hour format. If you tap any value, you can directly enter the number in the fol-
lowing screen. Features Description Beginner Normal For beginners, the voice recognition system pro-
vides voice prompts. For normal users, the voice recognition system provides simple and short voice guidances. 8 0 Setup I 8-11 Language Settings Keyboard Settings Screen Saver Settings You can configure the displayed system language. You can configure the keyboard layout for each language. You can select any of the following screen formats to be displayed when the screen or power is turned off (Press and hold the Power button). Digital clock and date Analog clock and date None When the language is changed, the sys-
tem language is automatically changed. Unique data including MP3 file name is not changed and voice recognition does not support some languages. You can configure ABCD or QWERTY keyboards for the system. i Information Configured keyboard layouts are applied to all input modes. 8-12 I Setup System Update At the System Info screen, insert the USB memory with the latest file downloaded, and then select the Update button to begin updating. The system will then reboot automatically. i Information This product needs supplemented software updates and additional functions, which collectively may take some time to complete, depending on the amount of data. CAUTION If the power is disconnected or the USB is removed during an update, the data might be damaged. Please do not turn off the vehicle while an update is in progress. System Info At the System Info screen, software ver-
sion information, updates, and storage status details are available. Features Description System version informa-
tion and update details are available. Select the Update button to update the system. After update is complete, the system will reboot automatically. Displays the memory space available for media storage. SW Info Storage 8 0 Setup I 8-13 MEMO part.10 Appendix Product Specification Troubleshooting FAQ Appendix Product Specification TFT-LCD Screen Size Resolution Operating Method 7 inch(152.4 X 91.44 mm) 384000 pixels (Resolution: 800 x 480) TFT(Thin Film Transistor) Active Matrix Viewing Angle Left/Right, Top/Bottom: ALL 89 Common Name Car TFT LCD Display Audio Unit Power Supply DC 14.4 V Current Consumption 2.5 A Operating Power Sleep Current DC 9 V ~ DC 16 V 1 mA
(Head Unit Only) Operating Temperature
-20 ~ +70 C
(-4 ~ +158 F) Storage Temperature
-30 ~ +80 C
(-22 ~ +176 F) Internal Lighting LED Dimensions 178 X 140.2 X 60 mm (Main BOX) Weight 1.940 kg Radio Channels FM: 87.5 MHz ~ 107.9 MHz(Step: 200 kHz) AM: 530 kHz ~ 1710 kHz(Step: 10 kHz) Sensitivity FM: Under 10 dBu/AM: Under 35 dBu Distortion Factor Within 2 %
9-2 I Appendix Bluetooth Wireless Technology 2402 ~ 2480 MHz Supported Bluetooth Specification 4.1 Handsfree(1.6), A2DP(1.2), AVRCP(1.4), PBAP(1.0)
-3~0 dBm (Power Class2, Conducted) 79 channels Frequency Range Supported Profile Output Number of Channels CAUTION The producer and installer cannot provide services related to life safety as the concerned radio equipment is liable to radio interference. 9 0 Appendix I 9-3 Problem Possible Cause Sound does not work in AUX mode The external device is not working Are the audio connector jacks fully inserted into the AUX terminal?
Is the external device connected with a standard connector cable?
Upon turning power on, the most recent mode screen is not displayed Within modes that play files by reading external sources, such as USB, iPod, or Bluetooth streaming mode, the most recently played mode screen prior to turn-
ing off power may not properly load If the corresponding device is not con-
nected, the mode operated prior to the most recent mode will operate If the previous mode still cannot be properly played, the mode operated prior to that will operate Troubleshooting 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. 2. If you are having problems with the device, try the suggestions listed below. 3. If the problems persist, contact your Kia dealer. Problem Possible Cause There are small red, blue, or green dots on the screen The sound or image is not working The screen is being displayed but sound is not working When the power is turned on, the corners of the screen are dark Sound is working from only one speaker Because the LCD is manufactured with technology requiring high point density, a pixel or lighting deficiency may occur within 0.01% of total pixels Has the Switch for the vehicle been turned to [ACC] or [ON]?
Has the SYSTEM been turned OFF?
Has the volume been set to a low level?
Has the volume been muted?
The display appearing somewhat dark after prolonged periods of use is normal with LCD panels. It is not a malfunction If the screen is very dark, contact your nearest Kia dealer for assistance Are the positions of Fader or Balance sound controls adjusted to only one side?
9-4 I Appendix Problem Possible Cause Countermeasure The power does not turn on The fuse is discon-
nected Device is not properly connected The system does not play The vehicle battery is low Replace with a suitable fuse If the fuse is disconnected again, please contact your point of purchase or Kia dealer Check to see that the device has been properly connected Charge the battery If the problem persists, contact your point of purchase or Kia dealer Problem The image color/tone quality is low Possible Cause Countermeasure The brightness, saturation, hue, and contrast levels are not set properly Properly adjust the bright-
ness, saturation, hue, and contrast levels through Display Setup The volume level Adjust the volume level Sound does not work is set to the lowest level The connection is Check to see that the not proper The device is currently fast-for-
warding, rewinding, scanning, or play-
ing in slow mode device has been properly connected The sound will not work when the device is fast-for-
warding, rewinding, scan-
ning, or playing in slow mode Vibration is occur-
The sound may be The sound or image quality is low ring from where the conversion switch has been installed Image color/tone quality is low short-circuited and the image distorted if the device vibrates The device will return to normal once vibrations stop 9 0 Appendix I 9-5 Countermeasure Problem Possible Cause Countermeasure Possible Cause USB memory is damaged USB memory has been contaminated A separately pur-
chased USB HUB is being used A USB extension cable is being used Please use the USB after formatting it. Remove any foreign sub-
stances on the contact surface of the USB memory and multimedia terminal Directly connect the USB memory with the multime-
dia terminal on the vehicle Directly connect the USB memory with the multime-
dia terminal on the vehicle A USB which is Use standard USB not a Metal Cover Type USB Memory is being used Memory An HDD type, CF, Use standard USB SD Memory is being used Memory There are no Only MP3, WMA file music files which can be played formats are supported. Please use only the sup-
ported music file formats There are no titles Use iTunes to download which can be played and save MP3 files into the iPod The iPod firmware Use iTunes to update version has not been properly updated The iPod device does not recog-
nize downloads the firmware version and reconnect the iPod with the device Reset the iPod and recon-
nect with the device Bluetooth on your Set it to ON mobile phone is set to OFF The Bluetooth Make the connection connection is not made active The iPod is not recog-
nized even though it has been connected Bluetooth does not work or its limited functions are available i Information While operating the device, if an abnormality occurs that cannot be corrected with the above described measures, press the RESET key to reset the system. Press and hold the RESET key (more than 1 second). The device power will turn off and the system will reset. Problem The USB does not work 9-6 I Appendix FAQ About Pairing Mobile Phones Q I cannot pair my mobile phone. What is the cause?
A Check to see that the mobile phone supports Bluetooth func-
tion. Verify if Bluetooth on the cell phone is set to OFF. If so, set it to ON. If the cell phone still cant be registered, try again after turning Bluetooth off and on, or delete the device registration on the multimedia system and cell phone and then register the cell phone again. Q What is a Passkey?
A A passkey is the password used to authenticate the connection between the head unit and mobile phone. The passkey only needs to be entered once when pairing the mobile phone for the first time. The initial passkey is 0000. You can change it with Bluetooth Bluetooth System Info Passkey menu options. SETUP Q What is the difference between pairing a mobile phone and con-
necting a mobile phone?
A Pairing occurs through authenticating the head unit and mobile phone. Mobile phones paired to the head unit can be connected and disconnected until the paired mobile phone is deleted from the system. Bluetooth Handsfree features, such as making/
answering calls or managing contacts, are supported only in mobile phones connected with the head unit. 9 0 Appendix I 9-7 About Making/Answering Phone Calls Q How can I answer a call?
A When there is an incoming call, a notification pop-up will become displayed. To answer the incoming call, select the Accept button on the screen or the key on the steer-
ing wheel control. To reject the call, select the Reject press the key on the steering wheel control. button on the screen or About Bluetooth Wireless Technology/
Head Unit Use Environment Q What is the range of my wireless connection?
A The wireless connection can be used within 15 yards. Q How many mobile phones can be paired?
A It is possible to pair up to five mobile phones. Q What should I do if I am talking on the Handsfree but want to switch the call to the mobile phone?
A While on a call, press and hold (more than 0.8 seconds) the key on the steering wheel control or select the Use Private button at the bottom of the Phone screen to switch the call to your mobile phone. Q Why is call quality sometimes poor?
A Check the reception sensitivity of the mobile phone when call quality becomes worsened. The call quality may deteriorate when the signal strength is low. Call quality may also worsen if metal objects, such as beverage cans, are placed near the mobile phone. Check to see if there are metal objects in the vicinity of the mobile phone. The call sound and quality may differ depend-
ing on the type of mobile phone. 9-8 I Appendix Important Information Before using your Multimedia system, read and follow all instructions and safety information provided in this end user manual ("User's Guide"). Not following precautions found in this User's Guide can lead to an accident or other serious consequences. Keep User's Guide in Vehicle When kept in the vehicle, the User's Guide will be a ready reference for you and other users unfamiliar with the Multimedia system. Please make certain that before using the system for the first time, all persons have access to the User's Guide and read its instructions and safety information carefully. Warning Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a safe and legal manner before attempting these operations. This is important since while setting up or changing some functions as you may to distract your attention away from the road and remove your hands from the wheel. 9 0 General Operation Voice Command Control Functions within the Multimedia system may be accomplished using only voice commands. Using voice commands while driving allows you to operate the system without removing your hands from the wheel. Prolonged Views of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time. Volume Setting Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could cause an accident. Use of Speech Recognition Functions Speech recognition software is inherently a statistical process which is subject to errors. It is your responsibility to monitor any speech recognition functions included in the system and address any errors. FCC Warning This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. 9 0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-11-07 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-11-07
|
||||
1 | Applicant's complete, legal business name |
HYUNDAI MOBIS CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0014195663
|
||||
1 | Physical Address |
203, Teheran-ro
|
||||
1 |
Seoul, N/A 135-977
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
TQ8
|
||||
1 | Equipment Product Code |
AVC40F6AN
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S**** C********
|
||||
1 | Title |
Senior Engineer
|
||||
1 | Telephone Number |
+82-3********
|
||||
1 | Fax Number |
+82-3********
|
||||
1 |
c******@mobis.co.kr
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
DT&C Co., Ltd.
|
||||
1 | Name |
H******** S****
|
||||
1 | Physical Address |
42, Yurim-ro, 154beon-gil, Cheoin-gu
|
||||
1 |
Yongin-si
|
|||||
1 |
South Korea
|
|||||
1 | Telephone Number |
82-31********
|
||||
1 |
h******@dtnc.net
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/06/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DIGITAL CAR AVN SYSTEM | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
DT&C Co., Ltd.
|
||||
1 | Name |
L**** S********
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
g******@dtnc.net
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 20 | 2402.00000000 | 2480.00000000 | 0.0020000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC