Description of Transmitter 1. PRIMARY FUNCTION
- Remote door lock/unlock/panic/tail gate
- Operating distance : 10 m over
- Id input(setting mode) 2. ELECTRICAL CHARACTERISTICS model name Operating voltage TRANSMITTER RKE-3F05 3 VDC Consumption current Max 15 mA Operating frequency 315 Power Sensitivity 75 dBuV/m under
-
Operating temperature
-20 ~ +60 ETC FM modulation 3. OPERATING DIAGRAM 1) TRANSMITTER A) DATA FRAME B) DATA FORMAT LOGIC "0"
LOGIC "1"
C) TRANSMISSION SPECIFICATION
- BAUD RATE : 1kbps
- CODING METHOD : MANCHESTER
- TRANSMISSION BIT COUNT : 380Bit
- TRANSMISSION TIME : 380ms15%
dance with the MAP DATABASE HOTLINE M & SOFT AMERICA MAP CENTER TEL : 888-757-0010 WEBSITE : www.mapnsoft.com This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC R ules. These limits ar e des igned to pr ovide r easonable pr otection against harmf ul interf erence in a r esidential installation. This equipm ent gener ates, u ses and can r adiate r adio f requency e nergy and, if not insta lled and used in accor instructions, ma y cause harmf ul interf erence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmf ul interference to radio or television reception, which can be determined by turning the equipment of f and on, t he user is encour aged to tr y to corr ect th e interf erence by one or more of th e following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: An y c hanges or modifications to this device not explicitly appr oved by ma nufacturer could void y our authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any inter ference received, including interference that may cause undesired operation. IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. following two c onditions: (1 ) this device ma y not caus e interfer ence, and (2) this