ISMP3-
User Guide Ingenico SA 28-32 boulevard de Grenelle 75015 Paris - FRANCE Tl. 33(0)1 58 01 80 00 - Fax 33 (0)1 58 01 91 35 E D I U G R E S U Contents 1. Introduction __________________________________________________ 4 2. Unpacking ___________________________________________________ 5 3. Recommendations _____________________________________________ 6 3.1. Safety _______________________________________________________________ 6 Scurit _________________________________________________________________ 6 Sicherheit ________________________________________________________________ 7 3.2. Security of your terminal _______________________________________________ 7 3.3. EC standard compliance marking _________________________________________ 8 3.4. FCC & IC Compliance. __________________________________________________ 8 3.4.1. Federal Communications Commission (FCC) Statement________________________________ 8 3.4.2. Industry Canada (IC) Statement. __________________________________________________ 9 3.5. Marking ____________________________________________________________ 11 3.6. Main Characteristics __________________________________________________ 12 4. Installation and connection _____________________________________ 13 4.1. Functional description ________________________________________________ 13 4.2. Battery insertion _____________________________________________________ 15 4.3. iPhone 6 insertion ____________________________________________________ 16 4.4. Charging ISMP3 ______________________________________________________ 18 4.5. Terminal in its environment ____________________________________________ 19 4.6. Power on / off _______________________________________________________ 19 4.7. Connection _________________________________________________________ 20 4.7.1. USB cable connection __________________________________________________________ 20 4.7.2. Cable disconnection ___________________________________________________________ 20 4.7.3. Multicradle ___________________________________________________________________ 21 4.8. Payment Integration with Bluetooth _____________________________________ 22 5. Daily use ____________________________________________________ 22 5.1. Getting started with ISMP3 ____________________________________________ 22 User Guide 900021302 R11 000 01 2/31 Copyright 2011 Ingenico All rights reserved 5.2. ISMP3 keypad functions _______________________________________________ 23 5.3. Adjusting the contrast ________________________________________________ 23 5.4. Barcode reader ______________________________________________________ 24 5.5. Card insertion _______________________________________________________ 25 5.5.1. Swiping a card ________________________________________________________________ 25 5.5.2. Inserting a chip card ___________________________________________________________ 25 5.5.3. Reading Contactless (Optional) __________________________________________________ 25 6. Maintenance ________________________________________________ 27 6.1. Cleaning of the terminal _______________________________________________ 27 Entretien du terminal _____________________________________________________ 27 Wartung von Endgerten __________________________________________________ 27 6.2. Transport and storage ________________________________________________ 28 6.3. Troubleshooting _____________________________________________________ 28 6.4. End of life ___________________________________________________________ 29 Fin de vie _______________________________________________________________ 29 Produktentsorgung _______________________________________________________ 29 User Guide 900021302 R11 000 01 3/31 Copyright 2011 Ingenico All rights reserved 1. Introduction Thank you for choosing a payment terminal Ingenico. We recommend you to read carefully this installation guide: It gives you the necessary information about safety precautions, unpacking, installation, and maintenance of your terminal. WARRANTY / SECURITY To benefit from the guarantee-related product, and to respect the security, we ask you to use only accessories delivered in box with the product, entrusting maintenance operations only to an authorized person. ISMP3 is battery powered, use only Ingenico parts for replacement. ISMP3 can be powered by different sources please respect these recommendations:
ISMP3 can be USB powered by using the power supply provided by Ingenico in the packaging. Failure to comply with these instructions will void the manufacturers responsibility. This symbol indicates an important Warning. This symbol indicates a piece of advice. User Guide 900021302 R11 000 01 4/31 Copyright 2011 Ingenico All rights reserved 2. Unpacking ADVICE Carefully preserve the packaging of ISMP3. It must be re-used whenever the terminal is shipped. Products of ISMP3 range are named: IMP5xx According to the model, the following items are included in the ISMP3 box (including optional accessories):
ISMP3 terminal PSU for battery charging USB cble The user guide can be an option. Battery pack WARNING The power supply unit provided with your equipment is specially designed for this Ingenico terminals. Do not use any other power supply. The use of a power supply with apparently similar voltage/current characteristics may damage your terminal. AVERTISSEMENT Dans le cas o vous choisiriez dutiliser un bloc alimentation, assurez-vous de nutiliser que le bloc d'alimentation qui a t conu spcialement pour votre terminal. N'utilisez pas d'autre bloc d'alimentation. L'emploi d'un bloc d'alimentation prsentant des caractristiques apparemment similaires de tension/intensit peut endommager votre terminal. WARNHINWEIS Nur das Netzteil, das speziell fr Ihr Gert ausgelegt wurde, benutzen. Benutzen Sie kein anderes Netzteil. Die Benutzung eines Netzgerts mit scheinbar hnlicher Spannung/Stromstrke kann zur Beschdigung Ihres Terminals fhren. ADVICE Your terminal is delivered with a protective see through film. We advise that you leave this protective film to ensure optimum protection of your terminal. Film presence does not alter in anyway the use of the terminal. User Guide 900021302 R11 000 01 5/31 Copyright 2011 Ingenico All rights reserved 3. Recommendations 3.1. Safety Lithium back-up battery The ISMP3 is fitted with a lithium battery which is not accessible to the user. Only a qualified technician may be authorized to open the unit and change this component. Main battery ISMP3 is fitted with battery specially designed for this terminal. Only use the appropriate chargers and batteries listed in the Ingenicos catalogue. Do not short-circuit the battery. Do not attempt to open the battery container. Used batteries must be disposed of at the appropriate sites. Electrical power supply network Provide an electrical outlet:
Located near the equipment and easily accessible;
Which meets the standards and regulations in the country of use;
The terminal ISMP3 can be connected to a power distribution system of the IT type for Norway. Warning Risk of explosion if battery is replaced by an incorrect type, do not disassemble, use specified charger only, do not short-circuit, do not dispose of in fire, do not throw in water, dispose of used batteries according to the instructions. Scurit Batterie de sauvegarde au lithium ISMP3 est quip d'une batterie au lithium inaccessible l'utilisateur. Seul un technicien qualifi est autoris ouvrir le bloc et changer ce composant. Batterie principale ISMP3 est quip d'une batterie spcifiquement conue pour ce terminal. Ce composant nest pas accessible par lutilisateur. N'utilisez que les chargeurs et batteries prvus figurant dans le catalogue Ingenico. Ne court-circuitez pas la batterie. N'essayez pas d'ouvrir le terminal. Les batteries usages doivent tre dposes aux endroits de rcupration prvus. Ne laissez pas votre terminal sans surveillance lintrieur dun vhicule. Dans le cas o la batterie devait tre remplace, cette opration devrait tre ralise par un technicien qualifi. Utilisation du rseau lectrique (accessoire) situe proximit du matriel et facile daccs conforme aux normes et aux rglementations en vigueur dans le pays dutilisation ISMP3 peut tre connect aux rseaux de distribution lectrique de type IT pour la Norvge. AVERTISSEMENT Il existe un risque dexplosion dans les cas suivants : remplacement incorrect de la batterie, exposition de la batterie prs dune source de chaleur ou mise de la batterie au feu. User Guide 900021302 R11 000 01 6/31 Copyright 2011 Ingenico All rights reserved Sicherheit Lithium-Akku ISMP3 ist mit einer Lithium-Batterie ausgestattet, mit der der Benutzer nicht in Berhrung kommen darf. Nur ein qualifizierter Techniker ist berechtigt, das Gert zu ffnen und diese Komponente auswechseln. AKKU ISMP3 ist mit einem speziell fr dieses Terminal bestimmten Akku ausgestattet. Nur ein qualifizierter Techniker ist berechtigt, das Gert zu ffnen und diese Komponente auswechseln. Verwenden Sie nur die entsprechenden Aufladegerte und Akkus, die im Ingenico Katalog aufgefhrt sind. Den Akku nicht kurzschliessen. Nicht versuchen, das Akku-Gehuse zu ffnen Als Akku verwechseln werden muss, benutzen Sie einen Tekniker Intervention. Leere Batterien sind umweltgerecht zu entsorgen. ISMP3 im Fahrzeug ohne berwachung nicht verlassen. elektrischen Netz In der Nhe des Gerts befindet und leicht zugnglich Welche erfllt die Normen und Vorschriften in den jeweiligen Lndern Das Terminal ISMP kann zu einer Energieverteilung der IT-Typ fr Norwegen angeschlossen werden WARNHINWEIS Es besteht Explosionsgefahr bei unsachgemmss entsorgten oder ins Feuer geworfenen Batterien und Akkus. 3.2. Security of your terminal Upon receipt of your terminal you should check for signs of tampering of the equipment. It is strongly advised that these checks are performed regularly after receipt. You should check, for example: that the keypad is firmly in place; that there is no evidence of unusual wires that have been connected to any ports on your terminal or associated equipment, the chip card reader, or any other part of your terminal. Such checks would provide warning of any unauthorised modifications to your terminal, and other suspicious behaviour of individuals that have access to your terminal. Your terminal detects any tampered state. In this state the terminal will repeatedly flash the message Alert Irruption! and further use of the terminal will not be possible. If you observe the Alert Irruption! message, you should contact the terminal helpdesk immediately. You are strongly advised to ensure that privileged access to your terminal is only granted to staff that have been independently verified as being trustworthy. CAUTION NEVER ask the customer to divulge their PIN Code. Customers should be advised to ensure that they are not being overlooked when entering their PIN Code. User Guide 900021302 R11 000 01 7/31 Copyright 2011 Ingenico All rights reserved 3.3. EC standard compliance marking EC standard compliance marking certifies that the product stipulated below:
ISMP3. complies with the basic requirements of European Directive 1999/5/CE, known as the R&TTE Directive concerning Radio Frequency equipment and telecommunications terminals with respect to:
Health and safety protection of the user and all other persons EMC protection conforms to the following harmonized standards :
IEC/EN 60950-1 : Electrical safety of data processing equipment including electrical office equipment. Issue DEC 2001 EN 301 489 : Electromagnetic compatibility and Radio Spectrum Matters (ERM) Electro-Magnetic Compatibility (EMC) EN 55022 : Data processing equipment Radio electric disturbance characteristics -
Limits and measurement methods. Issue 1998 / A1-2000/A2-2003 EN 55024: Data processing equipment Immunity characteristics - Limits and measurement methods. Issue 1998 + A1- 2001 + A2- 2003 EN 300 328 : (Bluetooth 2,4GHz) Electromagnetic compatibility and Radio Spectrum Matters (ERM) EN 302 291 : (Contactless 13,56MHz) Electromagnetic compatibility and Radio Spectrum Matters (ERM) Short Range devices EN 50364, EN 62369-1, EN 62311 : Limitation of Human exposure to electromagnetic fields 3.4. FCC & IC Compliance. FCC & IC has a specific naming. The references uses for FCC & IC certifications are:
IC Number : 2586D-IMP550BTCL FCC ID: XKB-IMP550BTCL 3.4.1. Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. User Guide 900021302 R11 000 01 8/31 Copyright 2011 Ingenico All rights reserved Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 15.19 (a) (3) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference and 2) This device must accept any interference received, including interference that may cause undesired operation of the device. 3.4.2. Industry Canada (IC) Statement. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1) l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le 2) brouillage est susceptible d'en compromettre le fonctionnement. 3.4.3. FCC/IC RF Exposure (SAR) Statement. The iSMP3, incorporating the iPhone 6, has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram averaged over 1 gram of tissue. During testing, the iPhone 6 radios, incorporated within the iSMP3, are set to their highest transmission levels and placed in positions that simulate use against the head, with no separation, and near the body, with 5mm separation. When using the incorporated iPhone 6 functionality, to reduce exposure to RF energy, use a hands-free option, such as the built-in speakerphone, the supplied headphones or other similar accessories. Carry the iSMP3 at least 5mm away from your body to ensure exposure levels remain at or below the as-tested levels. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. LiSMP3 qui intgre un IPhone 6, a t test et conforme aux limites dexposition aux radiofrquences (RF). Le DAS (Dbit dAbsorption Spcifique) fait rfrence au taux dabsorption des tissus humains aux ondes lectromagntiques. La limite du DAS est de 1,6W/kg en moyenne pour 1 gr de tissu. Pendant le test, les diffrents metteurs radio de lIPhone 6, coupls lISMP3, sont positionns leur plus haut niveau de transmission et placs de telle manire quils simulent une utilisation contre la tte sans sparation et proche du corps avec 5mm de sparation. Lors de lutilisation dun iPhone 6 dans un iSMP3, pour rduire lexposition aux ondes lectromagntiques, il est conseill dutiliser le mode main libre avec le mode haut-parleur ou bien en utilisant les couteurs ou accessoires similaires. Garder liSMP3 5mm de votre corps permet de garantir un niveau dexposition infrieur ou gale aux niveaux User Guide 900021302 R11 000 01 9/31 Copyright 2011 Ingenico All rights reserved liSMP3 sur pices mtalliques peuvent modifier tests. Des cas dutilisation de les performances radio de lappareil pouvant remettre en cause son DAS. Ces cas prcis ne sont pas tests et certifis. The iSMP3 complies with the FCC safety requirements for RF exposure in accordance with FCC rule part 2.1093 and KDB447498 D01 for portable use conditions. LiSMP3, dans un mode portable de fonctionnement, est conforme aux exigences de scurit FCC concernant lexposition aux ondes lectromagntiques suivant les rgles FCC part 2.1093 et KDB447498 D01 The iSMP3 complies with the IC safety requirements for RF exposure in accordance with RSS-102 Issue 5 for portable use conditions. LiSMP3, dans un environnement portable, est conforme aux exigences de scurit IC concernant lexposition aux ondes lectromagntiques suivant les rgles RSS-102 Issue 5 The iSMP3, incorporating the iPhone 6, must not be co-located or operated in conjunction with any other antenna or transmitter. LiSMP3 qui intgre un iPhone 6, ne doit pas tre coupl et opr avec dautres antennes ou metteurs radio. CAUTION The user is cautioned that any changes or modification not approved by INGENICO could void users authority to operate the equipment. User Guide 900021302 R11 000 01 10/31 Copyright 2011 Ingenico All rights reserved 3.5. Marking Below, you will find the different symbols used on the product and its power supply. The CE marking is the manufacturer's declaration that the product meets the requirements of the applicable EC directives. The CE mark is a mandatory conformity marking for certain products sold within the European Economic Area (EEA). This TV symbol shows consumers at a glance that a product has been examined by neutral experts and that there are no safety concerns The UL mark appears on end products and complete components suitable for factory and field installation. All of the products carrying these marks are covered by our Follow-Up Services program to determine that products continue to be manufactured in compliance with ULs safety requirements. The RCM mark will be the only mark to indicate compliance with the Australian Communications and Media Authoritys (ACMA) regulatory arrangements for telecommunications, radio, EMC and electromagnetic energy (EME). The C-Tick is an identification trademark registered to the Australian Communications Media Authority (ACMA). The C-Tick mark signifies that the labelled electronic device is compliant with applicable electromagnetic compatibility (EMC) requirements Waste of Electrical and Electronic Equipment (WEEE) symbol indicates that when the end-user wishes to discard this product, it must be sent to separate collection facilities for recovery and recycling. By separating this product from other household-type waste, the volume of waste sent to incinerators or land-fills will be reduced and natural resources will thus be This logo indicates that the product operates with an alternative voltage. This symbol is followed by the ratings (voltage and current for instance) This logo indicates that the product operates with a continuous voltage. This symbol is followed by the ratings (voltage and current for instance) Mark indicating a power supply meets the level V requirements. Double insulated or class 2 electrical appliances are products that have been designed in a way so as not to require a safety connection to electrical earth
(These products must NOT have a safety connection to Earth). conserved. Indoor use symbol. User Guide 900021302 R11 000 01 11/31 Copyright 2011 Ingenico All rights reserved 3.6. Main Characteristics The main technical characteristics of the terminal Ingenico ISMP3 are:
Mass
(Poids, Gewicht) Dimensions
(dimensions, Mae) Battery
(Batterie, Akku) Electrical mains network
(Rseau de distribution lectrique, Elektrische Stromnetz) Operating conditions Ambient temperature
(Temprature ambiante, Raumtemperatur) Max relative humidity
(Humidit relative maxi, Max. Relative Luftfeuchte) Connections on terminal
(Connexions sur le terminal, Terminalanschluss) Power supply unit Weight
(Poids, Gewicht) Power
(Puissance, Leistung) Storage conditions Storage temperature
(Temprature de stockage, Lagertemperaturen) Max relative humidity
(Humidit relative maxi, Max. relative Luftfeuchte) 240 g without Iphone 6 365 g with Iphone 6 165 x75x26,9 mm 1150 mAh Li-ion 100-240VAC / 50-60 Hz - Class II equipment from 0C to +40C (battery charging) from -10C to +45C (non charging) 85% at +40C Micro USB AB serial link 100g 1 A (traveller power supply provided by Ingenico) 1 A on the docking station (Ingenico accessory)
-20C,+55C 85% at +55C User Guide 900021302 R11 000 01 12/31 Copyright 2011 Ingenico All rights reserved 4. Installation and connection 4.1. Functional description The ISMP3 is a secure EMV Chip & PIN mobile payment holster to be used with an iPhone 6. The ISMP3 allows mobile merchants to convert their iPhone into a powerful & secure POS solution. It is composed of 2 functional sides:
ISMP3 Module Rear Side
(Smartphone Mobility Payment) User Guide 900021302 R11 000 01 13/31 Copyright 2011 Ingenico All rights reserved
Graphic display
Navigation keys in the menus
Charge & USB link pads
Smart card reader
Micro USB connector
Bar code scanner activation buttons
2D bar code reader
ISMP3 power ON key
Magnetic stripe reader
User Guide 900021302 R11 000 01 14/31 Copyright 2011 Ingenico All rights reserved 4.2. Battery insertion CAUTION :
Before starting, switch off the terminal and disconnect USB cable if fitted Pull up battery door Insert contact side first Warning There is a risk of explosion if the battery is incorrectly replaced or is placed in a fire. Please dispose of used batteries following instructions in section 6.4. User Guide 900021302 R11 000 01 15/31 Copyright 2011 Ingenico All rights reserved 4.3. iPhone 6 insertion CAUTION :
Before starting, switch off the terminal and the iPhone and disconnect USB cable Pull out ISMP3 from the Multicradle Remove the cover Take in hand ISMP3 with iPhone in front of you Insert carefully iPhone bottom side first. User Guide 900021302 R11 000 01 16/31 Copyright 2011 Ingenico All rights reserved Close the product with the cover as shown on the following drawing Lock the cover as shown on the following drawing User Guide 900021302 R11 000 01 17/31 Copyright 2011 Ingenico All rights reserved 4.4. Charging ISMP3 Before using ISMP3 for the first time, you need to charge it for about 4 hours. After that, you can charge the ISMP3 3 hours to recharge the battery to full capacity. Charge the ISMP3 using the USB cable and the power supply (provided by Ingenico) Charge the iSMP3 using the power cable or the docking station (multicradle provided separately as an accessory). CAUTION Operating the ISMP3 for the first time without the AC adapter, and without fully charging the backup battery may result in loss of data stored in RAM memory. When the main battery is removed, the backup battery retains date and time for at least 10 minutes. A battery indicator is provided on the ISMP3 screen, indicating the charge of the module. A multiple charging dock is available as a separate accessory. It connects on the charging pads, and features guiding in the Multicradle itself to ensure connection. The ISMP3 can also be charged using the charger provided in the package. The charger has to be plugged on the micro-USB connector. User Guide 900021302 R11 000 01 18/31 Copyright 2011 Ingenico All rights reserved Charging pads (used with multicradle dock only) USB link pads 4.5. Terminal in its environment Install the terminal on a flat surface, with an easy access to an electrical outlet if needed. Place the terminal away from any heat source and protected from dust, vibrations and electromagnetic radiations (away from video terminals, PC, anti-shoplifting barriers, ...). Positioning of the ISMP3 must be in such a way to make cardholder PIN (Personal Identification Number) spying infeasible. 4.6. Power on / off To power on ISMP3 connect the battery and press the green key. Product power on key User Guide 900021302 R11 000 01 19/31 Copyright 2011 Ingenico All rights reserved In case you wish to manually power off the terminal, press - key + yellow key simultaneously for a few seconds. This action is only possible when the terminal is not in charging mode. 4.7. Connection 4.7.1. USB cable connection A micro USB connector is located on left side of the terminal. Present the device in front of the connector and plug it USB Connector CAUTION Use only Ingenico cable or accessory not to void warranty. 4.7.2. Cable disconnection Present the device in front of the connector and unplug it User Guide 900021302 R11 000 01 20/31 Copyright 2011 Ingenico All rights reserved 4.7.3. Multicradle Present devices over the Multicradle , magnetic reader facing Multicradle guidance slot and plug it carefully.
-
-
Data exchanges indicator led.
Multicradle status indicator led:
Charge indicator led:
Red = in charge Green = iSMP & IPhone charged Green = ready Orange = Ethernet connectivity error Red = an error occur
-
-
-
User Guide 900021302 R11 000 01 21/31 Copyright 2011 Ingenico All rights reserved 4.8. Payment Integration with Bluetooth To make it easier for you to use the ISMP3 from your mobile device, Ingenico provides the
"PCL add-on". PCL stands for Payment Communication Layer. The PCL add-on is a complete set of tools, libraries, documentation and samples that will help you to:
pair ISMP3 with smartphone;
trigger the payment function;
remotely manage ISMP3;
use ISMP3 in your payment application. For more details about all these features and how to get started with the pairing process, please refer to the add-on documentation specific to the payment application used by your device or contact your product reseller. 5. Daily use 5.1. Getting started with ISMP3 Install the iPhone the ISMP3 as described in section 4. Switch ISMP3 payment module by pressing the lateral key. Follow the ISMP3 initialization procedure. This procedure differs from a customer to another. Please refer to your payment service provider. Business payment application running on the iPhone will be customer specific. Please refer to your business application provider. User Guide 900021302 R11 000 01 22/31 Copyright 2011 Ingenico All rights reserved 5.2. ISMP3 keypad functions
NAVIGATION keys in the menus
NUMERIC keys
FUNCTION keys F
CANCEL key (red)
CLEAR key (yellow)
VALIDATION key (green)
5.3. Adjusting the contrast The screen of your payment module is 128 x 64 pixels, illuminated with white light. If you wish to increase or to decrease the contrast of the characters displayed on screen, press simultaneously on the - key and F2 key in order to decrease the contrast, or the -
key and F3 key in order to increase. Keep pressing the keys as long as necessary. User Guide 900021302 R11 000 01 23/31 Copyright 2011 Ingenico All rights reserved 5.4. Barcode reader Barcode is activated with the 2 side keys as shown below. List of bar codes supported:
Reader type 1D 2D Barcode keys CMOS Imaging reader Reads 1D and 2D codes 1D: Codabar, Code 3 of 9, Code 11, Code 32 Pharmaceutical
(PARAF), Code 93, Code 128, EAN with Add-On and EAN with Extended Coupon Code, EAN-13, Interleaved 2 or 5, Matrix 2 of 5, Plessey, GS1DataBar, Straight 2 of 5 IATA, Straight 2 of 5 Industrial, Telepen, Trioptic Code, UCC/EAN-128, UPC and UPC-A 2D: MicroPDF, Codeblock, Aztec, QRCode, MaxiCode, DataMatrix, PDF417 User Guide 900021302 R11 000 01 24/31 Copyright 2011 Ingenico All rights reserved 5.5. Card insertion 5.5.1. Swiping a card Insert the card manually in the driver, magstripe-facing right. Swipe the card with constant speed, not too slow not too fast, to maximize the reading and avoid annoying repetitions. 5.5.2. Inserting a chip card Chip Cards should be inserted into your terminal as illustrated with the chip facing up and into the card reader 5.5.3. Reading Contactless (Optional) Bring the card firmly up to the active zone above the display (at about 1cm). Keep the card close to the display during the transaction User Guide 900021302 R11 000 01 25/31 Copyright 2011 Ingenico All rights reserved Your contactless terminal has a row of four status lights that are visible on display. When a contactless transaction is started the first (left hand) status light will be lit steadily; this indicates that the contactless display is in use but a card is not being read. When a contactless card is presented to the contactless active zone during a transaction the second, third and fourth status lights will be lit in turn. The card read is successful when all four status lights are lit and the confirmation tone is heard. User Guide 900021302 R11 000 01 26/31 Copyright 2011 Ingenico All rights reserved 6. Maintenance ATTENTION Before making any operations of maintenance in the terminal, make sure that power supply is disconnected. 6.1. Cleaning of the terminal First of all, unplug all the wires from the terminal. Good rules for proper cleaning of the terminal are:
Use a soft cloth that is very slightly soaked with soapy water to clean the outside of the terminal. Do not clean the electrical connections. Do not use in any case, solvents, detergents or abrasive products:
Those materials might damage the plastic or electrical contacts. Avoid exposing the terminal to the direct rays of the sun. Do not put anything into the slot of the smart card reader Entretien du terminal ATTENTION Assurez-vous que tous les cbles sont bien dbranchs du terminal avant toute intervention de maintenance sur le terminal. Avant tout, dbranchez tous les cbles du terminal. Pour bien nettoyer le terminal :
Utilisez les kits de nettoyage ingenico : http://www.ingenico.cleaningcards.com/
Ne nettoyez pas les connexions lectriques. N'utilisez jamais de solvants, de dtergents, dalcool ou de produits abrasifs :
Ces produits peuvent endommager le plastique ou les contacts lectriques. Evitez d'exposer le terminal aux rayons directs du soleil. N'insrez rien dans la fente du lecteur de carte. Wartung von Endgerten jeglicher Wartungsarbeit an dem Terminal sicher, dass die Stromversorgung ACHTUNG Stellen Sie vor unterbrochen ist. Als erstes alle Kabel vom Terminal trennen. Regeln fr eine ordnungsgemsse Reinigung des Terminals:
Fr die Auenseite des Terminals, Ingenico Cleaning kits benutzen. Keine elektrischen Anschlsse reinigen. Auf keinen Fall Lsungsmittel, Waschmittel oder Scheuermittel verwenden:
diese Mittel knnen den Kunststoff oder elektrische Kontakte beschdigen. Das Terminal keiner direkten Sonneneinstrahlung aussetzen. Nichts in den Schlitz des Chipkartenlesers einfhren. User Guide 900021302 R11 000 01 27/31 Copyright 2011 Ingenico All rights reserved 6.2. Transport and storage Use the original packaging for any unit or stored. Disconnect all cables from the terminal during the transport. Disconnect battery from the terminal during the storage. 6.3. Troubleshooting The terminal does not turn on:
Battery level is too low Check the USB connection Check for electrical power network The terminal fails to establish iPhone connection Check that the iPhone is correctly inserted Check the configuration of the iPhone Get support from technical Cards are not read Check that the magnetic card is passed correctly (with magnetic band directed to the interior of the terminal) Swipe again the card with the magnetic stripe movement constant and rapid Verify that the magnetic strip is not damaged, grooved or cracked Make sure you have inserted correctly the smart card into the smart card reader and removed the card only after the transaction User Guide 900021302 R11 000 01 28/31 Copyright 2011 Ingenico All rights reserved 6.4. End of life The product belongs to the family of electrical and electronic equipment. Therefore, it is subjected to the WEEE directive which requires the collection and the recycling at the end of life product. The Ingenico products present the symbol for the marking of electrical and electronic equipment as required by the WEEE Directive. The crossed-out wheeled bin printed on the product gives the information about the requirement not to dispose of WEEE as unsorted municipal waste and to collect such WEEE separately. To assure that the product is collected and recycled with respect to the environment, you must contact your supplier (in defect, contact the Ingenico local office or the commercial head office in charge of your country on www.ingenico.com, contact us page). The abandonment or uncontrolled disposal of waste can cause harm to environment and to human health. So, by recycling your product in a responsible manner, you contribute to the preservation of natural resources and to the protection of human health. Fin de vie Ce produit est marqu conformment aux Directives Europennes 2002/96/CE concernant les Dchets d'Equipements Electriques et Electroniques (DEEE) et 2006/66/CE concernant les piles et accumulateurs. Ces dispositions lgales obligent les producteurs et les fabricants tre responsables de la reprise, du traitement et du recyclage en fin de vie des quipements et des batteries. Ce symbole signifie que les DEEE et les batteries usages ne doivent pas tre jets, mais collects sparment et recycls. Ingenico garantit que des systmes efficaces de collecte et de recyclage sont mis en place pour les DEEE et les batteries usages conformment la rglementation locale de votre pays. Veuillez contacter votre distributeur pour plus de renseignements concernant la solution mise en place pour vous dbarrasser de votre ancien produit et des batteries usages. Les dchets d'emballage doivent galement tre collects sparment afin d'assurer leur limination et leur recyclage. Veuillez noter que le recyclage appropri des quipements lectriques et lectroniques et des batteries usages permet dassurer la protection de l'environnement et de la sant humaine. Produktentsorgung Dieses Produkt gehrt zur Familie der elektrischen und elektronischen Einrichtungen. Es unterliegt deshalb den Bestimmungen der WEEE die verlangt, dass das Altgert gesammelt und entsorgt wird. Die Ingenico Produkte enthalten alle das Symbol fr die Kennzeichnung von elektrischen oder elektronischen Einrichtungen, wie es die WEEE Richtlinie verlangt. Die durchgestrichene Mlltonne auf dem Produkt gibt an, dass das Produkt nach der WEEE Richtlinie nicht in den Hausmll geworfen werden darf, sondern getrennt entsorgt werden muss. User Guide 900021302 R11 000 01 29/31 Copyright 2011 Ingenico All rights reserved Um sicherzustellen, dass das Produkt eingesammelt und umweltgerecht entsorgt wird, mssen Sie Ihren Lieferanten kontaktieren (in Ermangelung dessen kontaktieren Sie die lokale Ingenico Niederlassung oder die fr ihr Land zustndige Hauptgeschftsstelle ber www.ingenico.com, Kontakt-Seite). Das Wegwerfen oder die unkontrollierte Entsorgung kann zu Umweltschden und Gefahren fr die menschliche Gesundheit fhren. Wenn Sie Ihr Produkt verantwortungsbewusst entsorgen, tragen Sie zum Erhalt der natrlichen Ressourcen und zum Schutz der menschlichen Gesundheit bei. User Guide 900021302 R11 000 01 30/31 Copyright 2011 Ingenico All rights reserved This Document is Copyright 2011 by INGENICO Group. INGENICO retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of INGENICO. Moreover, nobody is authorized to place this document at the disposal of any third party without the prior written permission of INGENICO. If such permission is granted, it will be subject to the condition that the recipient ensures that any other recipient of this document, or information contained therein, is held responsible to INGENICO for the confidentiality of that information. Care has been taken to ensure that the content of this document is as accurate as possible. INGENICO however declines any responsibility for inaccurate, incomplete or outdated information. The contents of this document may change from time to time without prior notice, and do not create, specify, modify or replace any new or prior contractual obligations agreed upon in writing between INGENICO and the user. INGENICO is not responsible for any use of this device, which would be non consistent with the present document. All trademarks used in this document remain the property of their rightful owners. iPhone is trademarks of Apple Inc., registered in the U.S. and other countries. Your contact Ingenico 192 avenue Charles de Gaulle 92200 Neuilly sur Seine - France Tl.: + 33 1 46 25 82 00 - Fax: + 33 1 47 72 56 95 www.ingenico.com
*
4 8 6 0 9 1 6 9 2
*
Ingenico SA 28-32, boulevard de Grenelle 75015 Paris - France Tl.: + 33 1 58 01 80 00 - Fax: + 33 1 58 01 91 35 www.ingenico.com User Guide 900021302 R11 000 01 31/31 Copyright 2011 Ingenico All rights reserved