|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5
|
Effective |
2023-12-06
|
|
1 2 3 4 5
|
Applicant's complete, legal business name |
INGENICO
|
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0018912279
|
|
1 2 3 4 5
|
Physical Address |
9 Avenue de la gare - Rovaltain TGV
|
|
1 2 3 4 5
|
BP25156
|
|
1 2 3 4 5
|
Valence Cedex 9, N/A
|
|
1 2 3 4 5
|
France
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5
|
TCB Application Email Address |
b******@baclcorp.com
|
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
1 2 3 4 5
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5
|
Grantee Code |
XKB
|
|
1 2 3 4 5
|
Equipment Product Code |
SQ808NA
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5
|
Name |
N******** J********
|
|
1 2 3 4 5
|
Title |
Certification Manager
|
|
1 2 3 4 5
|
Telephone Number |
+3304********
|
|
1 2 3 4 5
|
Fax Number |
+3347********
|
|
1 2 3 4 5
|
E-mail |
n******@ingenico.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 5 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
| 1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 | PCB - PCS Licensed Transmitter |
| 1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Module |
| 1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 | Purpose / Application is for | Change in Identification |
| 1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 | Grant Comments | Single Modular Approval. Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). |
| 1 2 3 4 5 | Single Modular Approval. Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports 20, 40, and 80 MHz bandwidth modes. |
| 1 2 3 4 5 | Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4, 25 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12 and 26; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for LTE Band 26; LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 7 and 41; LTE of 5 and 10 MHz bandwidth modes for LTE Band 13 and 17. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. |
| 1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd. Sh
|
|
1 2 3 4 5
|
Name |
K**** X********
|
|
1 2 3 4 5
|
Telephone Number |
+86 (********
|
|
1 2 3 4 5
|
E-mail |
K******@sgs.com
|
|