FCC ID: XKB-M2500CL3G Mobile payment terminal

MOVE/2500 User Guide www.ingenico.com 28-32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35 Ingenico - SA au capital de 47 656 332 / 317 218 758 RCS Nanterre Contents 1_Introduction 2_Prsentation 2_1 Content of the box 2_1_1 Terminal 2_2 Overview of the MOVE/2500 2_3 Keyboard details and functionality 3_Use of the terminal 3_1 Switching off the terminal 3_2 Reading card 4_Installation 4_1 Recommendation 4_2 USB Terminal connections 4_2_1 uUSB 4_3 Opening trap door 4_4 SAMs & SIMs 4 5 5 5 6 8 9 9 9 11 11 12 12 12 13 2 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 4_5 Battery 4_5_1 Main characteristics 4_5_2 Installing the battery 4_5_3 Charging the battery 4_5_4 Changing the battery 4_6 Paper roll 4_6_1 Mains characteristics of INGENICO paper roll 4_6_2 Installing paper roll 5_Recommendations 5_1 Safety 5_2 Security of your terminal 6_Standards 6_1 Environment (WEEE, Batteries and Packaging) 6_2 FCC/IC Compliance 7_Troubleshooting 14 14 14 15 16 17 17 18 19 19 20 22 22 22 27 3 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 1_Introduction We hope that you will be fully satisfied with your new terminal MOVE/2500. This terminal is available in different models. Please select by yourself in this documentation items related to your model. Read this guide to understand and make the best use of your terminal. It presents you the necessary information about use, installation, maintenance, safety and security recommendations. WARRANTY / SECURITY Use only the power supply included with the product to ensure best performance and safety. Maintenance should only be provided by Ingenico authorized technician. Failure to comply with these instructions will void the manufacturers responsibility. This symbol indicates an important Warning. This symbol indicates a piece of advice. 4 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 2_Presentation 2_1 Content of the box 2_1_1 Terminal MOVE/2500 terminal unit MOVE/2500 terminal unit equiped with a paper roll equiped with a paper roll A battery pack disconnected A battery pack disconnected Power adapter user guide WARNING The power supply unit provided with your equipment is specially designed for Ingenico terminals. Do not use any other power supply. The use of a power supply with apparently similar voltage/current characteristics may damage your terminal. ADVICE Keep the packaging. It must be re-used whenever the terminal is shipped. MOVE/2500 900022723 R11 000 03/0217 5 Copyright 2017 Ingenico All rights reserved 2_2 Overview of the MOVE/2500 Terminal unit Backlit keyboard Smart card reader 24 LCD Display Easy loading printer Magnetic card reader MOVE/2500 900022723 R11 000 03/0217 6 Copyright 2017 Ingenico All rights reserved Compartment where are located:

the battery pack the battery pack the SAM/SIM slots the SAM/SIM slots Weight

(without paper roll nor battery) 275g Dimensions (L x w x h) 168x81x69 mm Electrical mains network Connections on terminal 100-240VAC / 50-60 Hz - Class II equipment Micro USB AB serial link Power connector MOVE/2500 900022723 R11 000 03/0217 7 Copyright 2017 Ingenico All rights reserved 2_3 Keyboard details and functionality Some keys can have other functions according to the applications that are in the terminal. The functions key accesses the dif-

ferent application menus The red key cancels the procedure in progress The yellow key cancels the last cha-

racter The green key vali-

dates input selec-

tions and informa-

tion. It is also used to switch on the ter-

minal Feed paper a few centi-

metres if pressed for a long time (more than 2 seconds) MOVE/2500 900022723 R11 000 03/0217 8 Copyright 2017 Ingenico All rights reserved 3_Use of the terminal ADVICE Before to use the terminal, always check if the roll of paper is present. 3_1 Switching off the terminal If the battery is empty and the terminal in use is removed from its base, the terminal automatically shuts off. It may also be switch off by pressing simultaneously It may also be switch off by pressing simultaneously and (yellow key) for one second. and (yellow key) for one second. In order to restart the terminal, press on the key-

In order to restart the terminal, press on the key-

board. 3_2 Reading card Magnetic stripe card The card can be read either from bottom to top or from top to bottom, with the stripe facing the terminal. Use a regular movement in order to ensure a reliable card reading. MOVE/2500 900022723 R11 000 03/0217 9 Copyright 2017 Ingenico All rights reserved Smart card Card reader: insert the card horizontally with the chip facing upwards and leave in position throughout the transaction. Contactless (optional) Bring the card fi rmly up to the active zone. Keep the card close to the reader during the transaction The 4 virtual LEDs are displayed during the transaction. The terminal behavior for the cardholder may depend on:

The terminal environment Local usage (language) MOVE/2500 900022723 R11 000 03/0217 10 Copyright 2017 Ingenico All rights reserved 4_Installation 4_1 Recommendations Location of the Move/2500 Place the base on flat surface near an electric socket and according to the base to the telephone or an Ethernet socket. The terminal should be placed far from any very hot zones, protected from vibrations, dust, damp and electromagnetic radiation (computer screen, anti-theft barrier etc.). Operating conditions Ambient temperature from +0C to +50C Max relative humidity 85% at +40C Battery charging conditions Ambient temperature from +0C to +40C Storage conditions Ambient temperature from -20C to +55C Max relative humidity 85% at +55C Intended Use of the Move/2500 This device is for desk and handheld operation only and cannot be worn on user's body 11 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 4_2 USB Terminal connections 4_2_1 uUSB There is an USB connector (MicroAB) on the left side of the Move/2500 Wireless terminal (see below picture). This connector manages Host and Slave connexions. The terminal supports USB Keys with FAT16 or FAT32 The USB Key has to be used with an USB adapter (refers to accessories section) USB micro AB Connector used for PC travel charger, USB Key, etc

*MicroAB connector durability: up to 10 000 mating cycles 4_3 Opening trap door CAUTION Switch off the terminal before opening the trapdoor. Turn the terminal and unclip the trapdoor by pushing on the clip with as shown with the arrows on the picture MOVE/2500 900022723 R11 000 03/0217 12 Copyright 2017 Ingenico All rights reserved 4_4 SAMs & SIMs The connector modules security SAM/SIM is located inside the terminal, in a closed compartment. SAMs and SIMs are identifi ed by the engraved marks on the lower housing When introducing a SAM/SIM in its slot, be sure to put the cut corner as indicated on the engraved marks 2 factory options : 1SIM/3SAMs or 2SIMs/2SAMs SIM 2 Connector (Dual SIM terminals) or SAM3 connector SIM 1 Connector SAM 1 Connector SAM 2 Connector MOVE/2500 900022723 R11 000 03/0217 13 Copyright 2017 Ingenico All rights reserved 4_5 Battery 4_5_1 Main characteristics Characteristics Li-ion 2900 mAh Charge

(power supply-0.6 or 1A) 50% capacity in 1,5 h (1A) ; full capacity in 4 hours (1A) Battery life 450 transactions in GPRS with fully charged battery, printing and backlit activated. Can remain powered ON up to 150 hours with connected GPRS link and terminal in sleeping state starting with fully charged battery and without energy consumption related to backlit or radio link

* The battery capacity depends on the model of terminal and its use 4_5_2 Installing the battery WARNING Check that the terminal is not connected to the main electric network. Turn your terminal and unclip the battery trapdoor by pushing on the button as shown on the picture on the button as shown on the picture Disengage the trapdoor Take the battery pack included in the box Take the battery pack included in the box Locate the battery pack connector Locate the battery pack connector beside the battery compartment beside the battery compartment to Plug the battery pack connector according the connector locating system and (as shown on picture). Verify that it locks. MOVE/2500 900022723 R11 000 03/0217 14 Copyright 2017 Ingenico All rights reserved Place the battery pack in its compartment. Place the battery pack in its compartment. Close the battery compartment trapdoor. Close the battery compartment trapdoor. Battery compartment 4_5_3 Charging the battery When does the battery need to be charged?

On initial start-up, charge the battery for 16 hours under the environmental conditions stated above When used daily, the terminal recharges its batteries each time it is placed on its base. Charging is automatic When used with a terminal power supply: connect the power supply to Move/2500 power connector. How does the battery need to be charged?

The environment in which the charge takes place infl uences battery lifetime and autonomy (number of transactions) The optimal conditions are as follows:

Charging away from any external heat source (radiator, sun, enclosed area) The optimal temperature is between +15C and +25C How can the battery be charged?

Using the base Place the terminal on its base Check if the battery symbol is fl ashing or moving (=battery charging). MOVE/2500 900022723 R11 000 03/0217 15 Copyright 2017 Ingenico All rights reserved Using the terminal power supply (the terminal is out of its base) Connect the terminal power supply unit to the terminal MicroAB connector located on the left side of the terminal. Connect the power supply unit to the power supply mains network Check moving(=battery charging) to see if the battery symbol is fl ashing or 4_5_4 Changing the battery It is imperative to use a battery authorized by Ingenico. There is danger of explosion if battery used is not approved by Ingenico. Remove the terminal from its base Turn it off by pressing simultaneously and (yellow Turn it off by pressing simultaneously and (yellow Turn it off by pressing simultaneously and (yellow key) for about one second Remove the battery trapdoor (see section 4.5.2installing battery) Lift the battery and remove it from its compartment Carefully following the instructions below. disconnect battery, the Unlock connector by pressing the locking mechanism as indicated by F1 arrow while pulling this connector (F2 arrow). Release traction on it as soon as the connector comes unclipped Finish extracting connector by tilting it slightly (F3 arrow) to bring it away from the terminal housing Inform the terminal that battery will be replaced (*). Do so start the terminal without battery by fi tting it on its base, or connecting terminal power supply. Remove terminal from base or disconnect terminal power supply MOVE/2500 900022723 R11 000 03/0217 16 Copyright 2017 Ingenico All rights reserved Connect and install the new battery by following the instructions in section 4.5.2 Installing battery In order to preserve the environment, dispose used battery in compliance with current country recycling legislation.

(*)The terminal memorizes that there is no battery simply by powering up. It will then correctly perform-full recharge with the next battery. 4_6 Paper roll 4_6_1 Mains characteristics of INGENICO paper roll Depending on IWL model two paper roll can be used:

R40 paper roll characteristics Precisions Colour Width Diameter Lenght White 58 mm 40 mm About 18 metres The thermal paper can be deteriorated by poor storage conditions, so we recommend you to avoid :

storage in hot wet places (near air-conditioner, humidity higher than 85%) exposure to sunlight or ultraviolet for long periods contact with organic solvents (solvent type adhesive) direct contact with materials containing plasticizers (PVC transparent folders or envelopes) direct contact with diazo papers direct contact with water Rubbing or pressing the paper too strongly WARNING For best product performance, only use heat sensitized paper approved by Ingenico. 17 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved WARNING Switch off the terminal prior to installing a paper roll. Use only paper approved by Ingenico. The use of non-approved paper is likely to damage the printer of your terminal. 4_6_2 Installing paper roll Open the paper compartment by lifting the catch located at the rear of the terminal and pull the cover to the rear of the terminal. Insert the paper roll in the compartment following the directions shown on the below picture Pull the paper up to the top of the terminal Maintain the paper and close the lid Press simultaneously on both upper corners of the paper fl ap, as shown by arrows on picture, until it clips into position MOVE/2500 900022723 R11 000 03/0217 18 Copyright 2017 Ingenico All rights reserved ADVICE If you insert a new R40 paper roll, tear off the first length

(one complete turn to avoid printing on adhesive tape footprint). 5_Recommendations 5_1 Safety Powering down the Move/2500:

Disconnect the Move/2500 power supply block adapter from the electrical mains network. The Move/2500 is fitted with an internal lithium cell which can only be accessed by a qualified technician. Lithium cell Battery Move/2500 is fitted with battery specially designed for this terminal. Only use the appropriate chargers and batteries listed in the Ingenicos catalogue. Do not short-circuit the battery. Do not attempt to open the battery container. Used batteries must be disposed of at the appropriated sites. WARNING There is a risk of explosion if the battery is incorrectly replaced or is placed in a fire. Electrical power outlet The electrical outlet must meet the following criteria:

Must be installed near the equipment and easily accessible;

Must meet standards and regulations in the country where used;

For type A plug, the protection of the installation must be set to 20 A. 19 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved SAM1/SAM2/SIM1/ (SAM3/SIM2) readers compartment The trapdoor for battery, SAM1/SAM2/SIM1/ (SAM3/SIM2), readers located underneath the terminal, must be in place during the normal operation of the terminal. See sections Removal of SAM1/SAM2/SIM, modules as well as Connecting the battery. Your handset must be switched off by removing the battery pack. Remove the battery from the terminal when on an airplane. Non-compliance with these safety rules may result in legal action and/

or a ban on later access to cellular network services. On airplanes Explosion areas Certain regulations restrict the use of radio equipment in chemical plants, fuel depots and any site where blasting is carried out. You are urged to comply with these regulations. The terminal shall be protected by a specially fitted and certified cover enabling use in proximity to a fuel pump. Electronic health appliances Your handset is a radio transmitter which may interfere with health appliances, such as hearing aids, pacemaker, hospital equipment, etc. Your doctor or the equipment manufacturer will be able to provide you with appropriate advice. 5_2 Security of your terminal Your device fulfils current applicable PCI PTS security requirements. Upon receipt of your terminal you should check for signs of tampering of the equipment. It is strongly advised that these checks are performed regularly after receipt. You should check, for example: that the keypad is firmly in place; that there is no evidence of unusual wires that have been connected to any ports on your terminal or associated equipment, the chip card reader or any other part of your terminal. Such checks would provide warning of any unauthorised modifications to your terminal, and other suspicious behaviour of individuals that have access to your terminal. Your terminal detects any tampered state. In this state the terminal will repeatedly flash the message Alert Irruption! and further use of the terminal will not be possible. If you observe the Alert Irruption! message, you should contact the terminal helpdesk immediately. 20 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved You are strongly advised to ensure that privileged access to your terminal is only granted to staff that have been independently verifi ed as being trustworthy. The terminal must never be put in or left at a location where it could be stolen or replaced by another device. CAUTION Positioning of the terminal on check stand must be in such a way to make cardholder PIN (Personal Identifi cation Number) spying infeasible. Installing device on an adjustable stand must be in such a way that consumers can swivel the terminal sideways and/

or tilt it forwards/backwards to a position that makes visual observation of the PIN-entry process diffi cult. Positioning of in-store security cameras such way that the PIN-entry keypad is not visible. NEVER ask the customer to divulge their PIN Code. Customers should be advised to ensure that they are not being overlooked when entering their PIN Code. MOVE/2500 900022723 R11 000 03/0217 21 Copyright 2017 Ingenico All rights reserved 6_Standards 6_1 Environment (WEEE, Batteries and Packaging) This product is labeled in accordance with European Directives 2002/96/EC concerning Waste Electrical and Electronic Equipment

(WEEE) and 2006/66/EC concerning Batteries and Accumulators. Those provisions are requiring producers and manufacturers to become liable for take-back, treatment and recycling upon end of life of equipment and batteries. The associated symbol means that WEEE and waste batteries must not be thrown away but collected separately and recycled. Ingenico ensures that efficient collection and recycling schemes are set-up for WEEE and batteries according to the local regulation of your country. Please contact your retailers for more detailed information about the compliance solution in place for disposing of your old product and used batteries. Packaging waste must also be collected separately to assure a proper disposal and recycling. Please note that proper recycling of the electrical and electronic equipment and waste batteries will ensure safety of human health and environment. 6_2 FCC/IC Compliance Model Name FCC ID IC NUMBER Product : Move/2500 CL/Eth/Mod/3G Product : Move/2500 CL/Eth/Mod/4G FCC ID : XKB-M2500CL3G IC : 2586D-M2500CL3G 22 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures :

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 23 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation dIndustrie Canada, le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication satisfaisante. No changes shall be made to the equipment without the permission of Ingenico as this may void the users authority to operate the equipment. Tout changement apport ce terminal non expressment approuv par Ingenico est susceptible dannuler le droit de lutilisateur se servir de cet quipement. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. REN for this device is 0.1. 24 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved Sciences dInnovation, Le prsent appareil est conforme aux spcifications techniques applicables et Dveloppement conomique Canada. Lindice dquivalence de la sonnerie (IES) sert indiquer le nombre maximal de dispositifs qui peuvent tre raccords une interface tlphonique. La terminaison dune interface peut consister en une combinaison quelconque de dispositifs, la seule condition que la somme des IES de tous les dispositifs nexcde pas cinq. LIES pour cet appareil est de 0.1. Part 68 of FCC Rules Model Name US MODEM Product : Move/2500 CL/Eth/Mod/3G US : IEOMM01BM2500 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US : AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. This equipment uses the following USOC jacks : (RJ11C). A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. 25 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment, please contact INGENICO, or your local INGENICO distributor or service center in the U.S.A. for repair and/or warrant information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. U.S.A service center:

Ingenico North America 3025 Windward Plaza, suite 600 Alpharetta, GA 30005 USA Tel: +1(678) 456 1200 Fax: +1 (678) 456 1201 Email: info.us@ingenico.com 26 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 7_Troubleshooting The terminal does not turn on Check the battery (is it discharged, is it connected?) A full discharged battery can take long charging time to recover Connect terminal to terminal power supply or put it on powered base Cards are not read Check that the magnetic card is swiped correctly (with magnetic band on terminal side). Swipe again the card with the magnetic stripe movement constant and rapid Verify that the magnetic strip is not damaged, grooved or cracked Make sure you have inserted correctly the smart card into the smart card reader and removed the card only after the transaction is performed. The ticket is not printed Check the presence and proper positioning of the paper roll. Possibly adjust the paper roll following the instructions in this manual (section 0 Installing the paper roll) Check the type of paper used (thermal paper must be used) Verify thermal paper sensitive side. 27 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved This Document is Copyright 2017 by INGENICO Group. INGENICO retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of INGENICO. Moreover, nobody is authorized to place this document at the disposal of any third party without the prior written permission of INGENICO. If such permission is granted, it will be subject to the condition that the recipient ensures that any other recipient of this document, or information contained therein, is held responsible to INGENICO for the confidentiality of that information. Care has been taken to ensure that the content of this document is as accurate as possible. INGENICO however declines any responsibility for inaccurate, incomplete or outdated information. The contents of this document may change from time to time without prior notice, and do not create, specify, modify or replace any new or prior contractual obligations agreed upon in writing between INGENICO and the user. INGENICO is not responsible for any use of this device, which would be non consistent with the present document. All trademarks used in this document remain the property of their rightful owners. Your contact MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reservedwww.ingenico.com28-32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35Ingenico - SA au capital de 47 656 332 / 317 218 758 RCS Nanterre 25

MOVE/2500 User Guide www.ingenico.com 28-32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35 Ingenico - SA au capital de 47 656 332 / 317 218 758 RCS Nanterre Contents 1_Introduction 2_Prsentation 2_1 Content of the box 2_1_1 Terminal 2_2 Overview of the MOVE/2500 2_3 Keyboard details and functionality 3_Use of the terminal 3_1 Switching off the terminal 3_2 Reading card 4_Installation 4_1 Recommendation 4_2 USB Terminal connections 4_2_1 uUSB 4_3 Opening trap door 4_4 SAMs & SIMs 4 5 5 5 6 8 9 9 9 11 11 12 12 12 13 2 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 14 14 14 15 16 17 17 18 19 19 20 22 22 22 27 4_5 Battery 4_5_1 Main characteristics 4_5_2 Installing the battery 4_5_3 Charging the battery 4_5_4 Changing the battery 4_6 Paper roll 4_6_1 Mains characteristics of INGENICO paper roll 4_6_2 Installing paper roll 5_Recommendations 5_1 Safety 5_2 Security of your terminal 6_Standards 6_1 Environment (WEEE, Batteries and Packaging) 6_2 FCC/IC Compliance 7_Troubleshooting 3 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 1_Introduction We hope that you will be fully satisfied with your new terminal MOVE/2500. This terminal is available in different models. Please select by yourself in this documentation items related to your model. Read this guide to understand and make the best use of your terminal. It presents you the necessary information about use, installation, maintenance, safety and security recommendations. WARRANTY / SECURITY Use only the power supply included with the product to ensure best performance and safety. Maintenance should only be provided by Ingenico authorized technician. Failure to comply with these instructions will void the manufacturers responsibility. This symbol indicates an important Warning. This symbol indicates a piece of advice. 4 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 2_Presentation 2_1 Content of the box 2_1_1 Terminal MOVE/2500 terminal unit MOVE/2500 terminal unit equiped with a paper roll equiped with a paper roll A battery pack disconnected A battery pack disconnected Power adapter user guide WARNING The power supply unit provided with your equipment is specially designed for Ingenico terminals. Do not use any other power supply. The use of a power supply with apparently similar voltage/current characteristics may damage your terminal. ADVICE Keep the packaging. It must be re-used whenever the terminal is shipped. MOVE/2500 900022723 R11 000 03/0217 5 Copyright 2017 Ingenico All rights reserved 2_2 Overview of the MOVE/2500 Terminal unit 24 LCD Display Easy loading printer Backlit keyboard Smart card reader Magnetic card reader MOVE/2500 900022723 R11 000 03/0217 6 Copyright 2017 Ingenico All rights reserved Compartment where are located:

the battery pack the battery pack the SAM/SIM slots the SAM/SIM slots Weight

(without paper roll nor battery) 275g Dimensions (L x w x h) 168x81x69 mm Electrical mains network Connections on terminal 100-240VAC / 50-60 Hz - Class II equipment Micro USB AB serial link Power connector MOVE/2500 900022723 R11 000 03/0217 7 Copyright 2017 Ingenico All rights reserved 2_3 Keyboard details and functionality Some keys can have other functions according to the applications that are in the terminal. The functions key accesses the dif-

ferent application menus The red key cancels the procedure in progress The yellow key cancels the last cha-

racter The green key vali-

dates input selec-

tions and informa-

tion. It is also used to switch on the ter-

minal Feed paper a few centi-

metres if pressed for a long time (more than 2 seconds) MOVE/2500 900022723 R11 000 03/0217 8 Copyright 2017 Ingenico All rights reserved 3_Use of the terminal ADVICE Before to use the terminal, always check if the roll of paper is present. 3_1 Switching off the terminal If the battery is empty and the terminal in use is removed from its base, the terminal automatically shuts off. It may also be switch off by pressing simultaneously It may also be switch off by pressing simultaneously and (yellow key) for one second. and (yellow key) for one second. In order to restart the terminal, press on the key-

In order to restart the terminal, press on the key-

board. 3_2 Reading card Magnetic stripe card The card can be read either from bottom to top or from top to bottom, with the stripe facing the terminal. Use a regular movement in order to ensure a reliable card reading. MOVE/2500 900022723 R11 000 03/0217 9 Copyright 2017 Ingenico All rights reserved Smart card Card reader: insert the card horizontally with the chip facing upwards and leave in position throughout the transaction. Contactless (optional) Bring the card fi rmly up to the active zone. Keep the card close to the reader during the transaction The 4 virtual LEDs are displayed during the transaction. The terminal behavior for the cardholder may depend on:

The terminal environment Local usage (language) MOVE/2500 900022723 R11 000 03/0217 10 Copyright 2017 Ingenico All rights reserved 4_Installation 4_1 Recommendations Location of the Move/2500 Place the base on flat surface near an electric socket and according to the base to the telephone or an Ethernet socket. The terminal should be placed far from any very hot zones, protected from vibrations, dust, damp and electromagnetic radiation (computer screen, anti-theft barrier etc.). Operating conditions Ambient temperature from +0C to +50C Max relative humidity 85% at +40C Battery charging conditions Ambient temperature from +0C to +40C Storage conditions Ambient temperature from -20C to +55C Max relative humidity 85% at +55C 11 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 4_2 USB Terminal connections 4_2_1 uUSB There is an USB connector (MicroAB) on the left side of the Move/2500 Wireless terminal (see below picture). This connector manages Host and Slave connexions. The terminal supports USB Keys with FAT16 or FAT32 The USB Key has to be used with an USB adapter (refers to accessories section) USB micro AB Connector used for PC travel charger, USB Key, etc

*MicroAB connector durability: up to 10 000 mating cycles 4_3 Opening trap door CAUTION Switch off the terminal before opening the trapdoor. Turn the terminal and unclip the trapdoor by pushing on the clip with as shown with the arrows on the picture MOVE/2500 900022723 R11 000 03/0217 12 Copyright 2017 Ingenico All rights reserved 4_4 SAMs & SIMs The connector modules security SAM/SIM is located inside the terminal, in a closed compartment. SAMs and SIMs are identifi ed by the engraved marks on the lower housing When introducing a SAM/SIM in its slot, be sure to put the cut corner as indicated on the engraved marks 2 factory options : 1SIM/3SAMs or 2SIMs/2SAMs SIM 2 Connector (Dual SIM terminals) or SAM3 connector SIM 1 Connector SAM 1 Connector SAM 2 Connector MOVE/2500 900022723 R11 000 03/0217 13 Copyright 2017 Ingenico All rights reserved 4_5 Battery 4_5_1 Main characteristics Characteristics Li-ion 2900 mAh Charge

(power supply-0.6 or 1A) 50% capacity in 1,5 h (1A) ; full capacity in 4 hours (1A) Battery life 450 transactions in GPRS with fully charged battery, printing and backlit activated. Can remain powered ON up to 150 hours with connected GPRS link and terminal in sleeping state starting with fully charged battery and without energy consumption related to backlit or radio link

* The battery capacity depends on the model of terminal and its use 4_5_2 Installing the battery WARNING Check that the terminal is not connected to the main electric network. Turn your terminal and unclip the battery trapdoor by pushing on the button as shown on the picture on the button as shown on the picture Disengage the trapdoor Take the battery pack included in the box Take the battery pack included in the box Locate the battery pack connector Locate the battery pack connector beside the battery compartment beside the battery compartment to Plug the battery pack connector according the connector locating system and (as shown on picture). Verify that it locks. MOVE/2500 900022723 R11 000 03/0217 14 Copyright 2017 Ingenico All rights reserved Place the battery pack in its compartment. Place the battery pack in its compartment. Close the battery compartment trapdoor. Close the battery compartment trapdoor. Battery compartment 4_5_3 Charging the battery When does the battery need to be charged?

On initial start-up, charge the battery for 16 hours under the environmental conditions stated above When used daily, the terminal recharges its batteries each time it is placed on its base. Charging is automatic When used with a terminal power supply: connect the power supply to Move/2500 power connector. How does the battery need to be charged?

The environment in which the charge takes place infl uences battery lifetime and autonomy (number of transactions) The optimal conditions are as follows:

Charging away from any external heat source (radiator, sun, enclosed area) The optimal temperature is between +15C and +25C How can the battery be charged?

Using the base Place the terminal on its base Check if the battery symbol is fl ashing or moving (=battery charging). MOVE/2500 900022723 R11 000 03/0217 15 Copyright 2017 Ingenico All rights reserved Using the terminal power supply (the terminal is out of its base) Connect the terminal power supply unit to the terminal MicroAB connector located on the left side of the terminal. Connect the power supply unit to the power supply mains network Check moving(=battery charging) to see if the battery symbol is fl ashing or 4_5_4 Changing the battery It is imperative to use a battery authorized by Ingenico. There is danger of explosion if battery used is not approved by Ingenico. Remove the terminal from its base Turn it off by pressing simultaneously and (yellow Turn it off by pressing simultaneously and (yellow Turn it off by pressing simultaneously and (yellow key) for about one second Remove the battery trapdoor (see section 4.5.2installing battery) Lift the battery and remove it from its compartment the battery, disconnect Carefully following the instructions below. Unlock connector by pressing the locking mechanism as indicated by F1 arrow while pulling this connector (F2 arrow). Release traction on it as soon as the connector comes unclipped Finish extracting connector by tilting it slightly (F3 arrow) to bring it away from the terminal housing Inform the terminal that battery will be replaced (*). Do so start the terminal without battery by fi tting it on its base, or connecting terminal power supply. Remove terminal from base or disconnect terminal power supply MOVE/2500 900022723 R11 000 03/0217 16 Copyright 2017 Ingenico All rights reserved Connect and install the new battery by following the instructions in section 4.5.2 Installing battery In order to preserve the environment, dispose used battery in compliance with current country recycling legislation.

(*)The terminal memorizes that there is no battery simply by powering up. It will then correctly perform-full recharge with the next battery. 4_6 Paper roll 4_6_1 Mains characteristics of INGENICO paper roll Depending on IWL model two paper roll can be used:

R40 paper roll characteristics Precisions Colour Width Diameter Lenght White 58 mm 40 mm About 18 metres The thermal paper can be deteriorated by poor storage conditions, so we recommend you to avoid :

storage in hot wet places (near air-conditioner, humidity higher than 85%) exposure to sunlight or ultraviolet for long periods contact with organic solvents (solvent type adhesive) direct contact with materials containing plasticizers (PVC transparent folders or envelopes) direct contact with diazo papers direct contact with water Rubbing or pressing the paper too strongly WARNING For best product performance, only use heat sensitized paper approved by Ingenico. 17 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved WARNING Switch off the terminal prior to installing a paper roll. Use only paper approved by Ingenico. The use of non-approved paper is likely to damage the printer of your terminal. 4_6_2 Installing paper roll Open the paper compartment by lifting the catch located at the rear of the terminal and pull the cover to the rear of the terminal. Insert the paper roll in the compartment following the directions shown on the below picture Pull the paper up to the top of the terminal Maintain the paper and close the lid Press simultaneously on both upper corners of the paper fl ap, as shown by arrows on picture, until it clips into position MOVE/2500 900022723 R11 000 03/0217 18 Copyright 2017 Ingenico All rights reserved ADVICE If you insert a new R40 paper roll, tear off the first length

(one complete turn to avoid printing on adhesive tape footprint). 5_Recommendations 5_1 Safety Powering down the Move/2500:

Disconnect the Move/2500 power supply block adapter from the electrical mains network. Lithium cell The Move/2500 is fitted with an internal lithium cell which can only be accessed by a qualified technician. Battery Move/2500 is fitted with battery specially designed for this terminal. Only use the appropriate chargers and batteries listed in the Ingenicos catalogue. Do not short-circuit the battery. Do not attempt to open the battery container. Used batteries must be disposed of at the appropriated sites. WARNING There is a risk of explosion if the battery is incorrectly replaced or is placed in a fire. Electrical power outlet The electrical outlet must meet the following criteria:

Must be installed near the equipment and easily accessible;

Must meet standards and regulations in the country where used;

For type A plug, the protection of the installation must be set to 20 A. 19 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved SAM1/SAM2/SIM1/ (SAM3/SIM2) readers compartment The trapdoor for battery, SAM1/SAM2/SIM1/ (SAM3/SIM2), readers located underneath the terminal, must be in place during the normal operation of the terminal. See sections Removal of SAM1/SAM2/SIM, modules as well as Connecting the battery. On airplanes Your handset must be switched off by removing the battery pack. Remove the battery from the terminal when on an airplane. Non-compliance with these safety rules may result in legal action and/

or a ban on later access to cellular network services. Explosion areas Certain regulations restrict the use of radio equipment in chemical plants, fuel depots and any site where blasting is carried out. You are urged to comply with these regulations. The terminal shall be protected by a specially fitted and certified cover enabling use in proximity to a fuel pump. Electronic health appliances Your handset is a radio transmitter which may interfere with health appliances, such as hearing aids, pacemaker, hospital equipment, etc. Your doctor or the equipment manufacturer will be able to provide you with appropriate advice. 5_2 Security of your terminal Your device fulfils current applicable PCI PTS security requirements. Upon receipt of your terminal you should check for signs of tampering of the equipment. It is strongly advised that these checks are performed regularly after receipt. You should check, for example: that the keypad is firmly in place; that there is no evidence of unusual wires that have been connected to any ports on your terminal or associated equipment, the chip card reader or any other part of your terminal. Such checks would provide warning of any unauthorised modifications to your terminal, and other suspicious behaviour of individuals that have access to your terminal. Your terminal detects any tampered state. In this state the terminal will repeatedly flash the message Alert Irruption! and further use of the terminal will not be possible. If you observe the Alert Irruption! message, you should contact the terminal helpdesk immediately. 20 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved You are strongly advised to ensure that privileged access to your terminal is only granted to staff that have been independently verifi ed as being trustworthy. The terminal must never be put in or left at a location where it could be stolen or replaced by another device. CAUTION Positioning of the terminal on check stand must be in such a way to make cardholder PIN (Personal Identifi cation Number) spying infeasible. Installing device on an adjustable stand must be in such a way that consumers can swivel the terminal sideways and/

or tilt it forwards/backwards to a position that makes visual observation of the PIN-entry process diffi cult. Positioning of in-store security cameras such way that the PIN-entry keypad is not visible. NEVER ask the customer to divulge their PIN Code. Customers should be advised to ensure that they are not being overlooked when entering their PIN Code. MOVE/2500 900022723 R11 000 03/0217 21 Copyright 2017 Ingenico All rights reserved 6_Standards 6_1 Environment (WEEE, Batteries and Packaging) This product is labeled in accordance with European Directives 2002/96/EC concerning Waste Electrical and Electronic Equipment

(WEEE) and 2006/66/EC concerning Batteries and Accumulators. Those provisions are requiring producers and manufacturers to become liable for take-back, treatment and recycling upon end of life of equipment and batteries. The associated symbol means that WEEE and waste batteries must not be thrown away but collected separately and recycled. Ingenico ensures that efficient collection and recycling schemes are set-up for WEEE and batteries according to the local regulation of your country. Please contact your retailers for more detailed information about the compliance solution in place for disposing of your old product and used batteries. Packaging waste must also be collected separately to assure a proper disposal and recycling. Please note that proper recycling of the electrical and electronic equipment and waste batteries will ensure safety of human health and environment. 6_2 FCC/IC Compliance Model Name Product : Move/2500 CL/Eth/Mod/3G FCC ID FCC ID : XKB-

M2500CL3G IC NUMBER IC : 2586D-

M2500CL3G 22 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures :

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 23 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation dIndustrie Canada, le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication satisfaisante. No changes shall be made to the equipment without the permission of Ingenico as this may void the users authority to operate the equipment. Tout changement apport ce terminal non expressment approuv par Ingenico est susceptible dannuler le droit de lutilisateur se servir de cet quipement. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. REN for this device is 0.1. 24 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved dInnovation, Le prsent appareil est conforme aux spcifications techniques applicables et Dveloppement conomique Canada. Lindice dquivalence de la sonnerie (IES) sert indiquer le nombre maximal de dispositifs qui peuvent tre raccords une interface tlphonique. La terminaison dune interface peut consister en une combinaison quelconque de dispositifs, la seule condition que la somme des IES de tous les Sciences dispositifs nexcde pas cinq. LIES pour cet appareil est de 0.1. Part 68 of FCC Rules Model Name Product : Move/2500 CL/Eth/Mod/3G US MODEM US : IEOMM01BM2500 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US : AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. This equipment uses the following USOC jacks : (RJ11C). A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. 25 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment, please contact INGENICO, or your local INGENICO distributor or service center in the U.S.A. for repair and/or warrant information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. U.S.A service center:

Ingenico North America 3025 Windward Plaza, suite 600 Alpharetta, GA 30005 USA Tel: +1(678) 456 1200 Fax: +1 (678) 456 1201 Email: info.us@ingenico.com 26 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved 7_Troubleshooting The terminal does not turn on Check the battery (is it discharged, is it connected?) A full discharged battery can take long charging time to recover Connect terminal to terminal power supply or put it on powered base Cards are not read Check that the magnetic card is swiped correctly (with magnetic band on terminal side). Swipe again the card with the magnetic stripe movement constant and rapid Verify that the magnetic strip is not damaged, grooved or cracked Make sure you have inserted correctly the smart card into the smart card reader and removed the card only after the transaction is performed. The ticket is not printed Check the presence and proper positioning of the paper roll. Possibly adjust the paper roll following the instructions in this manual (section 0 Installing the paper roll) Check the type of paper used (thermal paper must be used) Verify thermal paper sensitive side. 27 MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reserved This Document is Copyright 2017 by INGENICO Group. INGENICO retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of INGENICO. Moreover, nobody is authorized to place this document at the disposal of any third party without the prior written permission of INGENICO. If such permission is granted, it will be subject to the condition that the recipient ensures that any other recipient of this document, or information contained therein, is held responsible to INGENICO for the confidentiality of that information. Care has been taken to ensure that the content of this document is as accurate as possible. INGENICO however declines any responsibility for inaccurate, incomplete or outdated information. The contents of this document may change from time to time without prior notice, and do not create, specify, modify or replace any new or prior contractual obligations agreed upon in writing between INGENICO and the user. INGENICO is not responsible for any use of this device, which would be non consistent with the present document. All trademarks used in this document remain the property of their rightful owners. Your contact MOVE/2500900022723 R11 000 03/0217Copyright 2017 IngenicoAll rights reservedwww.ingenico.com28-32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35Ingenico - SA au capital de 47 656 332 / 317 218 758 RCS Nanterre 25

FCC ID : XKB-M2500CL3G IC: 2586D-M2500CL3G Contains Contains US : IEOMM01BM2500 FCC ID: XMR201910BG95M3 IC: 10224A-2019BG95M3 1ngen1co CE Product: Move/2500 CL/Eth/Mod/4G HVN:MOV25DB MACAdr:

IMEI:

Made in:

.. l -sa-r--C-o_d_

@ _2_Q_...,I PN:

SN:

INN:M0\/25DB MAC/lvdr. IMEI: -------------- :a

-Rating:

5V = 1A XX Terminal

(1 D) Bar-Code N (1 D) 1 PN: XXXXXXXXXXXX 1 Terminal Bar-Code SN:YYDDDFFVPPPPPPPPXXXXXXXX Serial

Statement Letter Subject:

FCC ID: XKB-M2500CL3G IC: 2586D-M2500CL3G To Whom It May Concern :

Date: 2021-11-29 We, Ingenico, as manufacturer of Move/2500 range hereby declare that the modification made on exiting product FCC ID: XKB-Move/2500CL3G and IC:

2586D-M2500CL3G concerns only the cellular module embedded in the product. The 3G module (EHS6 ) embedded in the product and listed

"Contains FCC ID: QIPEHS6 Contains IC: 7830A-EHS6"

has been replaced by 4G module (BG95)

"Contains FCC ID: XMR201910BG95M3 Contains IC: 10224A-2019BG95M3"

RFID part has been kept unchanged (layout, electronics,....) Name Company Nicolas Jacquemont (HW Certification specialist) INGENICO Yours faithfully Signature

2022-01-07 Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Innovation, Science and Economic Development Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 Class 2 Permissive Change (C2PC) Request Letter FCC ID: XKB-M2500CL3G, granted on 04/27/2017 IC: 2586D-M2500CL3G, HVIN: Move/2500 CL/Eth/Mod/3G, granted on 04/27/2017 TO WHOM IT MAY CONCERN Pursuant to CFR 2.1043 and RSP-100 (Issue 12), section 10.2 we, Ingenico hereby requests a Class 2 Permissive Change. Reason: New SAR measurements due to new cellular module Modifications:

- New cellular module (FCC ID: XMR201910BG95M3, IC: 10224A-2019BG95M3). The module is not part of the certification and will be covered by Contains

- New HVIN will be: Move/2500 CL/Eth/Mod/4G The following new exhibits will be uploaded:

- SAR Test Report and SAR Test Setup Photos

- Schematics and PCB Layout

- Etc. Internal Photos Sincerely, Name/Title: JACQUEMONT Nicolas / HW Certification Specialist Company: INGENICO Address: 9 Avenue de la Gare, Rovaltain TGV, BP 25156, 26958 Valence, France Cedex 9 Phone: +33 4 75 84 21 23

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 2021-11-25 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID XKB-M2500CL3G For the product stated above, we request permanent confidentiality for exhibits which contain Operational Description, Block Diagram, Schematics, Parts Lists or Tune Up Information. The above exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name: JACQUEMONT Nicolas Company: INGENICO Address: 9 Avenue de la Gare, Rovaltain TGV, BP 25156, 26958 Valence, France Cedex 9 Phone: +33 4 75 84 21 23 Model name Move/2500 CL/Eth/Mod/4G