AXIUM D7 User Guide 4 5 5 7 Contents 1_Introduction 2_Presentation 2_1 Content of the box 2_2 Overview of the AXIUM D7 3_Prepare your terminal 3_1 Connect the battery 3_2 Install SIM & MicroSD 3_3 Install SAM 3_4 Switch On/Off the terminal 4_Charge your terminal 4_1 Battery characteristics 4_2 Charge of the battery 4_3 Changing the battery 5_Use of your terminal 5_1 Keyboard on payment side 5_2 Touch panel on payment side 5_3 Reading card 5_4 FCC/IC Compliance 6_Installation 8 9 8 11 12 12 12 13 14 16 16 17 18 20 16 AXIUM D7 2 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 7_Docking station 8_Recommendations 8_1 Safety 8_2 Security of your terminal 9_Standards 10_Troubleshooting 11_Marking 23 22 21 22 25 26 27 AXIUM D7 3 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 1_Introduction We hope that you will be fully satisfied with your new terminal AXIUM D7. Read this guide to understand and make the best use of your terminal. It presents you the necessary information about use, installation, maintenance, safety and security recommendations. WARRANTY / SECURITY Use only the power supply included with the product to ensure best performance and safety. Maintenance should only be provided by Ingenico authorized technician. Failure to comply with these instructions will void the manufacturers responsibility. This symbol indicates an important Warning. AXIUM D7 4 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 2_Presentation 2_1 Content of the box AXIUM D7 terminal unit equipment Payment side with small display and physical keyboard Merchant side (AndroidTM User Interface) with a 7 inch display and touch panel interface. Android is a trademark of Google LLC. User guide A battery pack disconnected AXIUM D7 5 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 Power supply and USB-C cable WARNING The power supply unit provided with your equipment is specially designed for Ingenico terminals. Do not use any other power supply. The use of a power supply with apparently similar voltage/current characteristics may damage your terminal. ADVICE Keep the packaging. It must be re-used whenever the terminal is shipped. AXIUM D7 6 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 2_2 Overview of the AXIUM D7 7inch Display with Touch Panel Front camera Smart Card Reader Keyboard with backlight Magnetic Card Reader Contactless Reader around the display 2.4inch Display with Touch Panel AXIUM D7 7 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 Weight Dimensions (L x w x h) Electrical main network Connections on terminal Terminal (+ Battery) : 520gr Terminal : 263,2 x 117,4 x 15,7 mm3 100-240VAC / 50-60 Hz - Class VI equipment USB-C connector + rear contacts for connexion with docking station 3_Prepare your terminal 3_1 Connect the battery Turn your terminal and unclip the battery trapdoor by pushing on it as shown on the picture Disengage the trapdoor Take the battery pack included in the box Locate the battery pack connector beside the battery compartment AXIUM D7 8 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 Plug the battery pack to the connector as shown on picture. Place the battery pack in its compartment. Close the battery compartment trapdoor. 3_2 Install SIM & MicroSD Turn your terminal and unclip the battery trapdoor by pushing on it as shown on the picture Disengage the trapdoor Access to the connectors below the battery AXIUM D7 9 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 Insert the MicroSD Memory Card into the connector slot as shown on the figure. MicroSD connector is located on terminal bottom. Insert the Micro SIM 1 and the Micro SIM2 (option). ADVICE be sure to use only MicroSIM format (3FF) or NanoSIM format (4FF) inserted in a MicroSIM adaptor To Remove the microSD OR MicroSIMs, please push slightly it and it will come out. SIM1 SIM2 MicroSD
(option) connector AXIUM D7 10 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 3_3 Install SAM CAUTION Switch off the terminal before opening the trapdoor. Turn the terminal and unclip the trapdoor by pushing on the clip as shown with the arrow on the picture. The connector modules security SAM are located inside the terminal, in a closed compartment. SAMs are identified by the engraved marks on the lower housing When introducing a SAM in its slot, be sure to put the cut corner as indicated on the engraved marks SAM#2 connector SAM#1 connector AXIUM D7 11 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 3_4 Switching On/ Off the terminal ON/OFF Key If the battery is empty and the terminal in use is removed from its base, the terminal automatically shuts down. It may also be switched off by pressing the ON/OFF key, few seconds until it appears the message SWITCH OFF on merchant side. In order to restart the terminal, press the ON/OFF key. 4_Charge your terminal 4_1 Battery characteristics Characteristics Capacity Charging voltage Charging Current (Max) Li-Ion Polymer 4000mAh 4.2V 1.5A Battery Life 500 cycles (80 % of capacity) AXIUM D7 12 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 4_2 Charge of the battery WARNING Check that the terminal is not connected to the main electric network. When does the battery need to be charged?
Upon initial start up, charge the battery for 16 hours under the environmental conditions stated above When used daily, the terminal recharges its battery each time it is connected to its external power supply unit or each time it is placed on its docking station. Charging is automatic How does the battery need to be charged?
When used with a terminal power supply: connect the power supply to AXIUM D7 USB-C connector. (located on the left side of the product) Using the docking station, Place the terminal on its docking station Check the battery indicator on Merchant screen The environment in which the charge takes place influences battery lifetime and autonomy (number of transactions) The optimal conditions are as follows :
Charging away from any external heat source (radiator, sun, enclosed area) The optimal temperature is between +15C and +25C AXIUM D7 13 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 4_3 Change of the battery It is imperative to use a battery authorized by Ingenico. There is danger of explosion if battery used is not approved by Ingenico. Remove the terminal from its base Turn it off by pressing the ON/OFF Key Remove the battery trapdoor (see section 3.1installing battery) Carefully disconnect battery, following the instructions below. Connect and install the new battery by following the instructions in section 3.1 Installing battery Close the battery trapdoor and charge the new battery. See section Charging the Battery 4.2 In order to preserve the environnement, dispose used battery in compliance with current country recycling legislation. Note : The terminal memorizes that there is no battery simply by powering up. It will then correctly perform-full recharge with the next battery. Main battery Axium D7 is fitted with battery specially designed for this terminal. Only use the appropriate chargers and batteries listed in the Ingenicos catalogue. Do not short-circuit the battery. Do not attempt to open the battery container. Used batteries must be disposed of at the appropriate sites. Electrical power supply network Provide and electrical outlet :
Located near the equipment and easily accessible;
Which meets the standards and regulations in the country of use;
The terminal Axium can be connected to a power distribution system of the IT type for Norway. AXIUM D7 14 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 Risk of explosion if battery is replaced by an incorrect type, do not disassemble, use specified charger only, do not short-circuit, do not dispose of in fire, do not throw in water, dispose of used batteries according to the instructions. AXIUM D7 15 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 5_Use of the terminal 5_1 Keyboard on consumer side Some keys can have other functions according to the applications that are in the terminal. Axium D7 keyboard is composed of 15 physical keys. The red key cancels the procedure in progress The yellow key cancels the last characters The green key validates input selections and informations 5_2 Touch panel on consumer side The AXIUM D7 device is equipped with touch panel allowing to capture functions and menus using your finger or a stylus. AXIUM D7 16 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 5_3 Reading card Magnetic stripe card The card can be read either from bottom to top or from top to bottom, with the stripe facing down. Use a regular movement in order to ensure a reliable card reading. Smart Card reader Insert the card vertically with the chip facing the customer and leave in position throughout the transaction. AXIUM D7 17 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 Contactless Bring the card firmly up to the active zone. Keep the card close to the reader during the transaction. The 4 LEDs are displayed on top of customer display during the transaction. 5_4 FCC/IC Compliance You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS AXIUM D7 18 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation dIndustrie Canada, le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente
(p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication satisfaisante Intended use and SAR evaluation The AXIUM D7 is an Android Point of Sale (POS) terminal. This professional device is composed of two parts. The Android side is the merchant interface that embeds an Electronics Cash Register (ECR). The convenience of the Android interface allows to manage easily business applications and launch the payment on the customer side. Brought Android environment in a POS must be viewed as an assets for business and to entertainment or multimedia like in consumer market. On the other side, there is the customer interface that embeds the payment readers. This terminal can be used in different environment. The POS may be docked on the cradle (AXIUM Dock) on a counter top. This POS may be removable and in this case there are three configurations:
- The merchant holds in his hand the POS
- The device is put on a countertop for payment
- The device can be used occasionally for payment at table (ie : in a restaurant) this ecosystem, Android is not associated in AXIUM D7 19 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 In all those configurations, the antennas are far (several decades of centimetres) from the Human body (Merchant or Customer side) This POS does not support or cannot support body worn accessories like belt clips etc, its weight (~535gr) and its height (265 x 120 mm) do not allow to wear it easily in a holster or in a shirt. Hand held SAR evaluation for "extremity SAR test ONLY" has been applied. AXIUM D7 20 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 6_Installation / Recommendations Location of the AXIUM D7 Place the terminal on flat surface near an electric socket. The terminal should be placed far from any very hot zones, protected from vibrations, dust, damp and electromagnetic radiation (computer screen, anti-theft barrier etc.). Operating conditions Ambiant temperature Max Relative humidity Storage conditions Ambiant temperature Max Relative humidity Power supply Electrical main network External power Supply Docking Station accessory From 0C to +40C 85% at +40C From -20C to +70C 85% at +55C 100-240VAC / 50-60Hz Class VI 5V 2A 5V 2A Security tag deactivation system could disturb the magnetic card reader AXIUM D7 21 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 7_Docking station AXIUM / series offers a base station providing different features to ease your life :
Charging (please refer to 4.2) 3 USB Ports Printing capability Ethernet and Wifi (option) AXIUM D7 can be charged with a dedicated Ingenico docking Station. On the back of the product there are some contacts for charging when the device is put on the docking station. Contact for charging USB Port Charging contact AXIUM D7 22 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 8_Recommendations 8_1 Safety Powering down the AXIUM D7 Disconnect the AXIUM D7 power supply block adapter from the electrical mains network. Lithium cell The AXIUM D7 is fitted with an internal lithium cell which can only be accessed by a qualified technician. Battery AXIUM D7 is fitted with battery specially designed for this terminal. Only use the appropriate chargers and batteries listed in the Ingenicos catalogue. Do not short-circuit the battery. Do not attempt to open the battery container. Used batteries must be disposed of at the appropriate sites. WARNING There is a risk of explosion if the battery is incorrectly re-
placed or is placed in a fire. Electrical power outlet The electrical outlet must meet the following criteria :
Must be installed near the equipment and easily accessible;
Do not short-circuit the battery. Do not attempt to open the battery container. Used batteries must be disposed of at the appropriates sites. AXIUM D7 23 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 On airplanes Your handset must be switched off by removing the battery pack. Remove the battery from the terminal when on an airplane. Non-compliance with these safety rules may result in legal action and/or a ban on later access to cellular network services. Explosion areas Certain regulations restrict the use of radio equipment in chemical plants, fuel depots and any site where blasting is carried out. You are urged to comply with these regulations. The terminal shall be protected by a specially fitted and certified cover enabling use in proximity to a fuel pump. Electronic health appliances Your handset is a radio transmitter which may interfere with health appliances, such as hearing aids, pacemaker, hospital equipment, etc. Your doctor or the equipment manufacturer will be able to provide you with appropriate advice. 8_2 Security of your terminal Your device fulfils PCI PTS security requirements. Upon receipt of your terminal you should check for signs of tampering of the equipment. It is strongly advised that these checks are performed regularly after receipt. You should check, for example: that the keypad is firmly in place; that there is no evidence of unusual wires that have been connected to any ports on your terminal or associated equipment, the chip card reader or any other part of your terminal. Such checks would provide warning of any unauthorized modifications to your terminal, and other suspicious behavior of individuals that have access to your terminal. Your terminal detects any tampered state. In this state the terminal will repeatedly flash the message Alert Irruption! and further use of the terminal will not be possible. If you observe the Alert Irruption! message, you should contact the terminal helpdesk immediately. You are strongly advised to ensure that privileged access to your terminal is only granted to staff that have been independently verified as being trustworthy. The terminal must never be put in or left at a location where it could be stolen or replaced by another device. AXIUM D7 24 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 CAUTION Positioning of the AXIUM D7 on check stand must be in such a way to make cardholder PIN (Personal Identification Number) spying infeasible. Installing device on an adjustable stand must be in such a way that consumers can swivel the terminal sideways and/or tilt it forwards/backwards to a position that makes visual observation of the PIN-entry process difficult. Positioning of in-store security cameras such that the PIN-entry keypad is not visible. NEVER ask the customer to divulge their PIN Code. Customers should be advised to ensure that they are not being overlooked when entering their PIN Code. The device is designed to be used in attended environment without a privacy shield. The position of the terminal must be in such a way to make cardholder PIN spying infeasible. The customer should be advised when entering his PIN code:
To use their hands to cover up (See figure below) the pinpad. To take care that he is not overlooked. shielding of PIN Entry AXIUM D7 25 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 9_Standards The CE marking indicates AXIUM D7 complies with the relevant Union harmonization legislation: RE Directive 2014/53/ EU for :
the protection of the health and the safety of the user and any other person. the protection requirements with respect to electromagnetic compatibility. and complies with harmonised standards. Environment (WEEE, Batteries and Packaging) This product is labeled in accordance with European Directives 2012/19/UE concerning Waste Electrical and Electronic Equipment
(WEEE) and 2006/66/EC concerning Batteries and Accumulators. Those provisions are requiring producers and manufacturers to become liable for take-back, treatment and recycling upon end of life of equipment and batteries. The associated symbol means that WEEE and waste batteries must not be thrown away but collected separately and recycled. Ingenico ensures that efficient collection and recycling schemes are set-up for WEEE and batteries according to the local regulation of your country. Please contact your retailers for more detailed information about the compliance solution in place for disposing of your old product and used batteries. Packaging waste must also be collected separately to assure a proper disposal and recycling. Please note that proper recycling of the electrical and electronic equipment and waste batteries will ensure safety of human health and environment. AXIUM D7 26 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 10_Troubleshooting The terminal does not turn on Check the battery (is it discharged ?, is it connected ?) A full discharged battery can take long charging time to recover Put terminal on powered base Get technical support Cards are not read Check that the magnetic card is swiped correctly (with magnetic band on terminal side). Swipe again the card with the magnetic stripe movement constant and rapid Verify that the magnetic strip is not damaged, grooved or cracked Make sure you have inserted correctly the smart card into the smart card reader and removed the card only after the transaction is performed. AXIUM D7 27 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 11_Marking The CE marking indicates terminal complies with harmonized standards and requirements of European Directives. This marking indicates that the product operates with an alternating current (AC) source (mains). It is completed by afferent values (voltage, frequency and max current). This marking indicates that your terminal is suitable for direct current (DC) only. It is completed by afferent values (voltage, and max current). This marking indicates power supply meets the energy efficiency level VI requirements. Double insulated or class 2 electrical appliances are products that have been designed in a way so as not to require a safety connection to electrical earth (These products must NOT have a safety connection to Earth). Indoor use symbol. This marking indicates power supply meets limited power source safety requirements. AXIUM D7 28 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119 This Document is Copyright 2019 by INGENICO Group. INGENICO retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of INGENICO. Moreover, nobody is authorized to place this document at the disposal of any third party without the prior written permission of INGENICO. If such permission is granted, it will be subject to the condition that the recipient ensures that any other recipient of this document, or information contained therein, is held responsible to INGENICO for the confidentiality of that information. Care has been taken to ensure that the content of this document is as accurate as possible. INGENICO however declines any responsibility for inaccurate, incomplete or outdated information. The contents of this document may change from time to time without prior notice, and do not create, specify, modify or replace any new or prior contractual obligations agreed upon in writing between INGENICO and the user. INGENICO is not responsible for any use of this device, which would be non-consistent with the present document. All trademarks used in this document remain the property of their rightful owners. Your contact www.ingenico.com 28-32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35 Ingenico - SA au capital de 47 656 332 / 317 218 758 RCS Nanterre AXIUM D7 29 Copyright 2019 Ingenico All rights reserved 900034667 R11 000 04/0119