i
e
d
u
G
r
e
s
U
Model:AXIUM DX8000-BASE-W2
WWW.ingenico.com
28-32,boulevard de Grenelle, 75015 Paris - France/ (T)+33(0)1 58 01 80 00 / (F)+33 (0)1 58 01 91 35
Ingenico-SA au capital de 47 656 332 / 317 218 758 RCS Nanterre
1
Contents
1. Product Introduction ......................................................................................................................................... 3
1.1 Open Package Inspection ............................................................................................................................ 3
1.2 Device Introduction ..................................................................................................................................... 3
1.3 Interface definition ...................................................................................................................................... 4
2. Product Technology Features ........................................................................................................................... 5
2.1 Product Technology Specifications ............................................................................................................ 5
2.2 Environmental Conditions .......................................................................................................................... 5
2.3 Product Functions ....................................................................................................................................... 5
3. WiFi connection ................................................................................................................................................. 6
3.1 Connect DX8000 to the base WiFi .............................................................................................................. 6
3.2 Web Setting of base .................................................................................................................................... 6
3.3 Restore factory Setting .............................................................................................................................. 9
4. Pairing connection ............................................................................................................................................. 9
4.1 Prepare for Base Pairing ............................................................................................................................. 9
4.2 Pair method ............................................................................................................................................... 10
4.3 Unpair method .......................................................................................................................................... 10
4.4 Ethernet Parameter Setting ......................................................................................................................11
4.5 WLAN Parameter Setting ..........................................................................................................................11
4.6 Advanced Setting ..................................................................................................................................... 12
4.7 Operating Mode ........................................................................................................................................ 12
4.7.1 Gateway Mode ................................................................................................................................ 12
4.7.2 Bridge Mode ................................................................................................................................... 13
4.7.3 WiFi Repeater Mode ....................................................................................................................... 13
4.8 Management Setting ............................................................................................................................... 14
5. Fixing of the base............................................................................................................................................. 15
6. FAQs ................................................................................................................................................................. 17
7. Notes ................................................................................................................................................................ 18
8. Delivery and Storage ....................................................................................................................................... 18
9. Power Adapter ................................................................................................................................................ 18
10. Standard ............................................................................................................................................................ 19
2
1. Product Introduction
1.1 Open Package Inspection
Open the package to check if there are any disabling masks or transportation damage in the terminals
and fittings.
Procedures：
1) Open the package
2) Check the following items(Subject to actual product configuration)
Base host
Product instruction
AC power cable
12V/3.33A power adapter
3) Save the transportation package and packing material for second use.
1.2 Device Introduction
1. RJ45 Network Interface2. USB-TYPE A3.USB-TYPE A
4. USB-TYPE B 5. Reset Button6.DC12v JACK Power Interface
7.Network LED link&active 8. Two color Indicator lights 9.Pairing Button
3
10.DX8000 Charging Contact
1.3Interface definition
1） RJ45 interface
Sequence
RJ45Signal
2） USB-TYPE A interface
Sequence
USB-TYPE A Signal
3） USB-TYPE B interface
Sequence
USB-TYPE BSignal
ETH_TX+
ETH_TX-
ETH_RX+
NC
NC
NC
NC
ETH_RX-
VBUS 5.0V
D-
D+
GND
Not connect
D-
D+
GND
1
2
3
4
5
6
7
8
1
2
3
4
1
2
3
4
4
2. Product Technology Features
2.1 Product Technology Specifications
Port
Power
a DC12V JACK port
a RJ45 network port
two USB A HOST port supporting USB2.0
a USB B DEVICE port supporting USB2.0
Every USB HOSToutput: 5.0VDC0.5A
Charge output: 5.0VDC 2.0A
Power adapter: input 100-240V AC, 50/60Hz; output 12V DC3.33A
Size and Weight
Size：193.8mmx89mmx38.6mm
Net Weight：0.20kg
Gross Weight：0.70kg
2.2 Environmental Conditions
Environmental conditions for running, storing and delivering the product：
Temperature
Humidity
Running
Storage and Delivery
Running
Storage and Delivery
0℃～40℃
-20℃～70℃
10％～90％
5％～90％（40℃）
Atmospheric pressure
86kPa～106 kPa; Below 2000 meters above sea level
2.3 Product Functions
charged.
The base has three main functions as below:
DX8000 charging：Connect the base with the power adapter, then place DX8000 on the base to get
Serves as extended communication ports of DX8000: Network port, USB port, etc.
Typical applications: Enables DX8000 to communicate with host computer via USB port, and get
Ethernet through Network port.
5
6
3. WiFi connection
3.1 Connect DX8000 to the base WiFi
Power on the base.
Check the SSID and password from the label on the back of base.
Click “Settings” menu on DX8000,and then click “Network and Internet”, enter “ Wi-Fi” and select
the base SSID to connect.(step 1~4)
After that , DX8000 can use the RJ45 network of the base.
Step1 Step2 Step3 Step4
3.2 Web Setting of base
The base can be set from the web.
Use a computer to connect the base via WiFi.
The web setting IP of base is 192.168.47.1. Login name is Admin. Password is DX8000BASE.
User can get the status of base on the status page.
User can get and change the Ethernet parameter on the Network page.
User can get and change the WLAN parameter on the WLAN page.
7
User canchange the operating mode,enable DMZ or set static DHCP on the Advanced page.
User can update the firmware of base, save and reload the settings, change the password on the
Manage page.
8
9
3.3 Restore factory Setting
Use sharp to click the RESET button to restore the factory setting of the base.
The position of RESET button is below.
4. Pairing connection
4.1 Prepare for Base Pairing
If DX8000 want to use the USB ports on the base, it should be paired to the base.
Only one DX8000 can use the USB ports of the base at the same time.
If the red indicator light is on, it indicates the base is available for pairing.
If the green indicator light is on, it indicates the base is successfully paired. If the base is to be
paired with another DX8000, long press on the [Pairing] button to clear the pairing record .When
the red indicator light is on,pair another DX8000 with the base.
Illumination of two color indicator lights：
SN
1
2
3
4
Light Condition
Red light on
Green light flashing
Green light on
Red light flashing
Base Status
Base to be paired
Base paired but disconnected with DX8000
Base paired and connected with DX8000
Base in upgrading
4.2 Pair method
First,connect DX8000 to the base via chapter 3.1.
Click “Settings” menu on DX8000,and then click “Base”,input the web password [Step1].
Click the grey button beside the SSID “ING2.4G_XXXXXXX” to pair [Step2].
After pairing,we can check the ports of base in the menu.[Step3].
Step1 Step2Step3
4.3Unpairmethod
Only the paired DX8000 could be unpaired with the base. When DX8000 unpairs the base, the base
will change its conditions to “unpaired” with the red light on.
Click the blue button besides the SSID [Step1]. Click “YES”[Step2] to unpair the base with DX8000:
10
Step1 Step2
4.4 Ethernet Parameter Setting
Procedures:
Tab on “Network”enter WAN Setting or LAN Setting menu.
Enter WAN Setting to get and set the WAN parameter.
Enter LAN Setting to get and set the LAN parameter.
Step 1Step 2
4.5 WLAN Parameter Setting
Enter WLAN menu.[Step1]
AXIUM DX8000-BASE-W2 has 2.4G WLAN and 5G WLAN,so we can click “2.4GHz WLAN” to set 2.4G
parameter and click “5GHz WLAN” to set 5GHz WLAN.[Step2]
We can set channel,RF power,band width and get WLAN MAC on the menu.[Step3,4]
11
Step 1 Step 2 Step 3 Step 4
4.6 Advanced Setting
Enter advanced menu.
We can set the operating mode,DMZ and static DHCP of the base[Chart 1].
In operating mode,we can set the base work in different mode[Chart 2].
We can set DMZ[Chart 3]and add static DHCP[Chart 4].
[Chart 1] [Chart 2] [Chart 3] [Chart 4]
4.7Operating Mode
4.7.1 Gateway Mode
ADSL/ONU distribute the IP to base ETH port.
Base distribute the IP to DX8000.
12
ADSL/ONU and DX8000 are not in the same network segment .
4.7.2 Bridge Mode
Base distribute the IP to the computer and DX8000.
They are in the same network segment .
13
4.7.3 WiFi Repeater Mode
It is a mode to expand coverage of base.
For example , DX8000 is too far away to connect Base A. So we can put Base B between Base A and
DX8000.
Set Base B to repeat the Base A. DX8000 can connect to internet via Base B.
4.8 Management Setting
In management menu, we can upgrade the firmware of base.
First,we use software manager to install the wifidockfirmware.apk in DX8000,as follow :
Second,we pair the base with DX8000.We can get current version and lastest version information
and click upload to upgrade the firmware[Step1]. Wait for upgrading.[Step2].And get the
successful tips[Step3]. Check the version of the base[Step4].
14
[Step1][Step2][Step3][Step4]
5. Fixing of the base
In some scenes,we want to fix the base and the DX8000 to the table.
The fixing structure is not standard configuration .We need to buy it from the agent.
Installation procedures as below:
First,fix the space block on the table with screws.
Second,fix the Base Fixing structure on the space block with three screws.
Third,put the base on the structure to lock it.
Fourth,fix the Base Fixing structure on the base with three screws.
Fifth,change the battery cover of DX8000 and put DX8000 on the base to lock it.
15
If we want to unfix the base and DX8000,we can use screwdriver to push the area of the
structure to unfix them.
16
17
6. FAQs
Q1： The base fails to connect DX8000.
Cause1：DX8000 WLAN is not yet opened.
Solution：Open WLAN via the drop-down box of DX8000.
Cause 2：DX8000 is placed too far away from base.
Solution：Place and pair the devices within 10 meters.
Cause 3：The password of DX8000base is changed .
Solution：Input the correct password ,or restore factory setting to get the default password.
Q2： It displays that base is not connected to DX8000, while the green indicator light of base flashes.
Cause1：The two devices are too far away from each other that its connection fails.
Solution: Place the two devices near, better within 10 meters.
Cause 2： The DX8000 is not paired to the base.
Solution:Only one DX8000 can be paired to the base at the same time .The paired DX8000 may not
be this one.We can pair this DX8000 to the base according to Q4.
Q3： Device plugged in USB port cannot be recognized.
Cause: The USB port only supports for products of company such as the scanning gun（e.g.
BR200-B），scanning box(e.g.DCS20), E830MIS，and USB devices of serial ports such as CH34x,
PL230, FTDI, CP210X. Other devices are not supported for now.
Solution: If new USB devices need to be developed, please consult after-sales personnel.
Q4： How to pair one paired base with another DX8000?
Solution: After powering on the base, long press on [Pairing] button for 3 secs. After that, the base
is in “unpaired” status with red indicator light on. Perform pairing operations on DX8000. The base
only save the information of latest DX8000 successfully paired with.
Q5：Why mobile phone can not search the 5G WiFi?
Solution: Check whether mobile phone can support 5G WiFi.
7. Notes
Prevent the terminal from sun exposure, high temperature, moister and other mean conditions.
Cut off the power before cleaning the device and wipe the main body with dry cloth.
When the following abnormal phenomena occur, stop running the device immediately, cut off the
power supply, and report to the service provider as soon as possible:
1） harsh noise heard during operation.
2） impurities or water found in the machine.
3） Unpleasant smell found during operation.
8. Delivery and Storage
Deliver the device in normal way, avoiding rain and snow, sun exposure and mechanical impact.
The product should be stored in the original box. The box should be at least 15cm away from the floor, at
least 50cm from the wall, heat source, cold source, window or air inlet.
9. Power Adapter
The base can only be connected to the adapterwhich is provided with AXIUM DX8000-BASE-W2.
WARNING
The power adapter provided is specially designed for ingenicoAXIUMDX8000-BASE-W2. Do not use any
other power supply. The use of a power supply with apparently similar voltage/current characteristics
may damage your terminal.
ATTENTION
L'adaptateur secteur fourni est spécialement conçu pour l'ingenico AXIUM DX8000-BASE-W2. N'utilisez
aucun autre bloc d'alimentation. L'utilisation d'une alimentation avec des caractéristiques de tension /
courant apparemment similaires peut endommager votre terminal.
18
10. Standard
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment
The antennas used for this transmitter must be co-located or operating in conjunction with any other
antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF exposure
The antenna of the product,under normal use condition is at least 20cm away from the body of the
user.Warning statement to the user for keeping 20cm separation distance and the prohibition of
operating to a person has been printed on the user manual.So,this product under normal use is l0cated
on electromagnetic far field between the human body.
ISEDC WARNING
This device complies with Innovation, Science and Economic Development Canada license‐exempt RSS
standard (s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
19
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
In accordance with the Innovation Regulations, Science and Canada Economic Development, this radio
transmitter may operate with an antenna of a type and maximum (or lower) gain approved for the
transmitter by Industry Canada. In order to reduce the risk of radio interference to other users, the
antenna type and its gain must be chosen so that the equivalent isotropically radiated power (e.i.r.p)
does not exceed the intensity required by the antenna establishing a satisfactory communication.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Exposition aux RF
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator&
your body. This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
Le rayonnement de la classe b repecte ISED fixaient un environnement non contrôlés.Installation et
mise en œuvre de ce matériel devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs
ou ne peuvent pas coexister cette antenne ou capteurs avec d’autres.
Environment (WEEE, Batteries and packaging)
This product is labeled in accordance with European Directives 2012/19/EU concerning Waste Electrical
and Electronic Equipment (WEEE) and 2013/56/EU concerning Batteries and Accumulators. Those
provisions are requiring producers and manufacturers to become liable for take-back, treatment and
recycling upon end of life of equipment and batteries.
THE PRODUCT
The crossed-out waste bin stuck on the product or its accessories means that the product
belongs to the family of electrical and electronic equipment, and waste batteries must not
be thrown away but collected separately and recycles.
Please contact your retailers for more detailed information about the compliance solution
in place for disposing of your old productand used batteries.
Packaging waste must also be collected separately to assure a proper disposal and recycling.
In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste,
20
which can have an effect on the environment and human health.
This Document is Copyright © 2020 by ingenico Group. ingenico retains full copyright ownership, rights
and protection in all material contained in this document. The recipient can receive this document on
the condition that he will keep the document confidential and will not use its contents in any form or by
any means, except as agreed beforehand, without the prior written permission of ingenico. Moreover,
nobody is authorized to place this document at the disposal of any third party without the prior written
permission of ingencio. If such permission is granted, it will be subject to the condition that the recipient
ensures that any other recipient of this document, or information contained therein, is held responsible
to ingenico for the confidentiality of that information.
Care has been taken to ensure that the content of this document is as accurate as possible. ingenico
however declines any responsibility for inaccurate, incomplete or outdated information. The contents
of this document may change from time to time without prior notice, and do not create, specify, modify
or replace any new or prior contractual obligations agreed upon in writing between ingenico and the
user.
ingenico is not responsible for any use of this device, which would be non-consistent with the present
document.
All trademarks used in this document remain the property of their rightful owners.
WWW.ingenico.com
28-32,boulevard de Grenelle, 75015 Paris - France/ (T)+33(0)1 58 01 80 00 / (F)+33 (0)1 58 01 91 35
Ingenico-SA au capital de 47 656 332 / 317 218 758 RCS Nanterre
21