FCC ID: 2AFHW-VPB200 Portable Bluetooth Speaker

DO NOT PRINT DIELINE M U S I C EDITION PORTABLE BLUETOOTH SPEAKER O V E R V I E W B L U E T O O T H P A I R I N G B A T T E R Y S T A T U S Press the button to begin Bluetooth Pairing. (Flashing Blue light) CHECK BATTERY LEVEL Volume Up Multi-Function Button ( O )

(Play/Pause and Next/Previous) Volume Down Bluetooth Button ( ) Power Button ( ) LED Indicator USB-C Charge Port Wrist Lanyard Connection MODEL: VPB-200 INSTRUCTION MANUAL HVIN: VPB200 PLEASE READ INSTRUCTION MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE Power On / Off ................................................................. Volume Up .............................................................................................. Volume Down ......................................................................................... Play/Pause ................................................................................. Next Track ................................................................................ Previous Track ............................................................................. Enter MP3 USB Mode ............................................... Bluetooth Mode ......................................................................... Pair a Device .................................................................... Disconnect Bluetooth Device ................................... Factory Reset .......................................................... Long Press (1 sec) button Press + button Press button Single Press O button Double Press O button Triple Press O button Press and hold (5 sec) O button Single Press button Long Press (1 sec) button Press and hold (5 sec) button Press and hold O button (10 sec) Wait for the Victrola ME1 to appear on your available devices list of your external device and press Victrola ME1 Once paired, the ME1 will play a paired chime and the light will turn solid Blue for 2 seconds U S B - C M P 3 P L A Y B A C K Long Press the O Button until the LED flashes Orange, then turns solid Orange. The unit is now in USB MP3 Playback mode. Use the O button to play, pause and skip MP3 files from a connected USB-C Flash drive

(See Overview Controls) (USB-C Flash drive not included) D U A L S P E A K E R P A I R I N G Press the and O button simultaneously for 1 second on BOTH speakers to enter Dual Speaker Pairing Mode (Flashing Purple light) PAIRING COMPLETE: Chime and solid purple LED indicate speakers are connected (speakers always connect in MONO mode) MONO/STEREO CHANNEL SWITCHING: After Dual Speaker Pairing is connected, press the and O button on EITHER speaker to switch between MONO and STEREO pairing mode STEREO MODE The right channel will flash purple 3 times quickly MONO MODE Both units will be solid purple for 2 seconds TO DISCONNECT: Press and hold and O button on EITHER speaker for 5 seconds to disconnect dual-speaker pairing PLEASE NOTE:

-If BOTH devices are in Dual Speaker Pairing Mode and do not connect, try placing speakers closer together.

-Dual Speaker Pairing only works with another Victrola Music Edition 1 speaker. Single press button when unit is powered on to view battery level LED Indicator Color Green ........................................................................................... Battery Level 50-100%

Orange ........................................................................................... 26-49%

Red .............................................................................................. 10%-25%

Flashing Red ....................................................................................

< 10%

Flashing White ............................................................................. Charging OFF (while plugged in) ........................................................ Fully Charged S P E C I F I C A T I O N S GENERAL Weight . 0.5kg Driver . 50mm Frequency response . 80Hz-20KHz Battery working time . 12 hours (varies by audio content and volume level)

. Charging time . 2.5 hours Charging port type . Type-C Battery type . Rechargeable Li-ion Battery7.4V / 2500mAh) BLUETOOTH Bluetooth Version . Bluetooth V5.0 Bluetooth Profile . A2DP V1.3, AVRCP V1.6 Bluetooth Frequency Range . 2402-2480MHz Operating Distance . 10 meters (33 ft.) BT Transmitting Power . 4.2dBm BT Transmitting Modulator . GFSK, /4DQPSK, 8DPSK INCLUDED:

ME1 Speaker, Manual, Wrist strap, USB-C Charging Cable Design and specification are subject to change without notice Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners Designed in Denver, Colorado | Made in China S A F E T Y I N S T R U C T I O N S 19. 1. Read these instructions All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions The safety and operating instructions should be retained for future reference. 3. Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions All operating and use instructions should be followed. 5. Clean only with a dry cloth. 6. Do not block any ventilation openings. Keep at least 5 cm around the apparatus for sufficient ventilations. Install in accordance with the manufacturers instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 9. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12. Unplug the apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, does not operate normally, or has been dropped. 14. Please keep the unit in a well ventilated environment. 15. Only use attachments/accessories specified or provided by the manufacturer. 16. The main plug is used as disconnect device, the disconnected device shall remain readily operable. 17. This product is not intended for commercial use. Household Use Only. 18. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. Warning: To reduce the risk of fire or electrical shock, do not exposed the apparatus to rain or moisture. No naked flame sources such as candles shall be placed on top of the apparatus. Caution: Changes or modifications not expressly approved by the manufacturer could void the users authority to operate this device. Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous exposure. Battery Risk of explosion if the battery is replaced by an incorrect Caution: type; disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. F C C W A R N I N G S FCC REGULATORY COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC RADIATION EXPOSURE STATEMENT This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites dexposition aux radiations dfinies par le Canada pour des environnements non contrls. Cet metteur ne doit pas tre install au mme endroit ni utilis avec une autre antenne ou un autre metteur. ISED REGULATORY COMPLIANCE This device contains licence-exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) Lappareil ne doit pas produire de brouillage. (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. ISED RADIATION EXPOSURE STATEMENT This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Cet metteur ne doit pas tre colocalis ou fonctionner en conjonction avec une autre antenne ou un autre metteur. Limitations:

This limited warranty does not cover failure of the product arising, in whole or in part, from improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or wear from ordinary use or environmental deterioration. This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product. This limited warranty is null and void for products not used in accordance with Victrolas instructions. This limited warranty terminates if the original retail purchaser sells o otherwise transfers this product. This limited warranty is null and void for defects or damage caused by installation or repair performed by any person or entity other than a Victrola authorized installer or dealer. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, jurisdiction to jurisdiction or country to country. All express and implied warranties for the product, including but not limited to any implied warranties of merchantability and fitness for a particular purpose, are limited in time to the term of this warranty. Some states, jurisdictions or countries do not allow the exclusion of certain implied warranties or conditions, or limitations on how long an implied warranty or condition lasts, so this limitation may not apply to you. Victrolas responsibility for malfunctions and defects in hardware is limited to replacement or repair as set forth in this warranty statement. Victrola does not accept liability for special, punitive, consequential or incidental damages or losses, whether direct or indirect, including without limitation, any liability for third party claims against you for damages or losses or for products not being available for use. The maximum liability for which Victrola may be responsible will be no more than the amount you paid for the product that is the subject of the claim. Some states, jurisdictions or countries do not allow the exclusion or limitation of special, indirect, incidental or consequential damages, so the above limitation or exclusion may not apply to you. W A R R A N T Y Canada and US Territories Victrola is a registered trademark of Innovative Technology Electronics, LLC. United States Victrola (Innovative Technology Electronics, LLC) warrants to the original retail purchaser that this product will be free from defective materials and workmanship for one (1) year from the date of purchase, subject to the limitations below. This warranty period is not extended if we replace the product. To obtain a replacement under the terms of this warranty, you must contact the dealer from which it was purchased with your original receipt. If assistance from the dealer from which it was purchased is impossible, you may contact our customer service for warranty assistance at victrola.com/contact. Except as limited below, if the product proves defective in either material or workmanship within one (1) year from the date of purchase, Victrola will replace the product at no charge. If the product model is no longer available and cannot be replaced with an identical model, Victrola will issue a merchandise credit for the purchase price to be redeemed at victrola.com. The Warranty on this product shall comply with applicable law when sold to a consumer in Canada or a US Territory. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt. If assistance from the dealer from which it was purchased is impossible, you may contact our customer service for warranty assistance at victrola.com/contact. If this product proves defective in either material or workmanship, Victrola will replace the product at no charge. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, Victrola at its sole option may replace the unit with a current model of equal or greater value. Outside the U.S, Canada, and US Territories The Warranty on this product shall comply with applicable law when sold to a consumer outside of the United States, Canada, and US Territories. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt.

vs INGEN HONG AY YAN ATS-09(ME1) 82mm MUSIC EDITION 1 DESIGNED IN DENVER, COLORADO | MADEIN CHINA MODEL: VPB-200 | INPUT: 5V==2A, PORTABLE BLUETOOTH SPEAKER

(2022 INNOVATIVE TECHNOLOGY ELECTRONICS, LLC 3513 BRIGHTON BLVD, SUITE 570, DENVER, CO 80216 WWW.VICTROLA.COM s01381 FOC ID: 2AFHW-VPB200 | 10: 9577A-VPB200 | CAN ICES-2(8/NMB-3(8) | HVIN: VPB200 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION SN: AXOSBXXXXYYYYY COMPLIES WITH UL 62868-1 CAN/CSA 22.2 NO. 623681 45.7mm

***ALL MARKINGS ARE LASER ETCHED SERIAL NUMBER FORMAT FONT: HELVETICA NEUE LT STD-65 MEDIUM 4.7pt font size / 50 tracking AXeANTEXIN, 03B = ME1 BLACK, XXX = WEEK/YEAR, AND YYYY= UNIT NUMBER AX=ANTEXIN, 08S = ME1 SILVER, XXXX = WEEK/YEAR, AND YYYY= UNIT NUMBER

INNOVATIVE TECHNOLOGY ELECTRONICS LLC Date: 08/04/2022 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 From:

Regarding:

Confidentiality Request regarding application for FCC ID: 2AFHW-VPB200 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Print Name: Ann Stinn Title: Compliance and Quality Specialist Signature:

On behalf of Company: INNOVATIVE TECHNOLOGY ELECTRONICS LLC Telephone: 3033285617 E-mail: astinn@victrola.com

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name INNOVATIVE TECHNOLOGY ELECTRONICS LLC Address Grantee Code FCC ID 3513 Brighton Blvd Suite 570 Denver Colorado 80216 United States 2AFHW 2AFHW-VPB200 Authorized Contact Name Ann Stinn Contact Email Contact Phone Compliance and Quality Specialist 3033285617 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 08/04/2022 Print Name:

Ann Stinn Compliance and Quality Specialist Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

INNOVATIVE TECHNOLOGY ELECTRONICS LLC Date: 08/04/2022 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AFHW-VPB200 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with INNOVATIVE TECHNOLOGY ELECTRONICS LLC. This authorization is valid until further written notice from the applicant. Print Name: Ann Stinn Title: Compliance and Quality Specialist Signature:

On behalf of Company: INNOVATIVE TECHNOLOGY ELECTRONICS LLC Telephone: 3033285617 E-mail: astinn@victrola.com