FCC ID: PD962205ANHU Intel Centrino Advanced-N 6205

by: Intel Corporation latest update: 2016-05-25 model: 62205ANHU

Fifteen grants have been issued under this FCC ID from 09/14/2010 to 05/25/2016 (this is one of two hundred and seventy-three releases in 2016 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked troubleshooting guides, drivers, instructions, password defaults, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manaul Users Manual pdf 71.73 KiB
various User Manual Users Manual pdf 1.23 MiB / May 08 2011
various User Manual 1 Users Manual pdf 751.87 KiB
various User Manual 2 Users Manual pdf 19.54 KiB
various Attestation Statements pdf
various Attestation Statements pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Attestation Statements pdf
various RF Exposure Info pdf
various Test Setup Photos pdf / May 08 2011
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Test Report pdf
various Attestation Statements pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Test Report pdf
various Attestation Statements pdf
various RF Exposure Info pdf April 03 2011
various Attestation Statements pdf / April 03 2011
various Cover Letter(s) pdf
various External Photos pdf
various Internal Photos pdf
various Attestation Statements pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various User Manaul Users Manual pdf 71.73 KiB
various User Manual Users Manual pdf 1.23 MiB / May 08 2011
various User Manual 1 Users Manual pdf 751.87 KiB
various User Manual 2 Users Manual pdf 19.54 KiB

frequency equipment class purpose
1 2016-05-25 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2422 ~ 2452 DTS - Digital Transmission System
3 2011-07-15 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
4 5755 ~ 5795 DTS - Digital Transmission System
5 2011-06-28 5755 ~ 5795 DTS - Digital Transmission System
6 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
7 2011-05-25 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
8 5755 ~ 5795 DTS - Digital Transmission System
9 2011-03-23 5755 ~ 5795 DTS - Digital Transmission System
10 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
11 2011-03-04 5755 ~ 5795 DTS - Digital Transmission System
12 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
13 2010-09-14 5180 ~ 5230 NII - Unlicensed National Information Infrastructure TX Original Equipment
14 5755 ~ 5795 DTS - Digital Transmission System
15 JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s Applicant Information
various Effective 2016-05-25
various 2011-07-15
various 2011-06-28
various 2011-05-25
various 2011-03-23
various 2011-03-04
various 2010-09-14
various Applicant's complete, legal business name Intel Corporation
various FCC Registration Number (FRN) 0008035131
various Physical Address 100 Center Point Circle Suite 200
various 100 Center Point Circle
various Columbia, SC
various United States
app s TCB Information
various TCB Application Email Address H******@acbcert.com
various h******@atcb.com
various H******@atcb.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PD9
various Equipment Product Code 62205ANHU
app s Person at the applicant's address to receive grant or for contact
various Name S**** C**** H********
various Title Product Regulations Engineer
various Telephone Number 803-3********
various Fax Number 803-2********
various E-mail s******@intel.com
app s Technical Contact
various Firm Name Intel Mobile Communications
various AT4 Wireless
various Intel Corporation
various RF Exposure Lab
various SGS Taiwan Ltd.
various Name S**** H******
various R**** O****
various J**** M******
various W******** C******
various Physical Address 100 Center Point Circle Suite 200
various Parque Tecnologico de Andalucia
various 802 N. Twin Oaks Valley Rd. Suite 105
various 134 Wu Kung Road, Wuku Industrial Zone
various 100 Center Point Circle STE 200
various Columbia, South Carolina 29210
various Campanillas-Malaga, 29590
various Columbia, 29210
various San Marcos, California 92069
various Taipei County, 248
various Taipei County, 24803
various United States
various Spain
various Taiwan
various Telephone Number 80321********
various 34952********
various 803 2********
various 760-4********
various 886-2********
various Fax Number 80321********
various 34952********
various 803 2********
various 760-4********
various 886-2********
various 34952********
various E-mail S******@Intel.com
various r******@at4wireless.com
various s******@intel.com
various i******@rfexposurelab.com
various w******@sgs.com
various s******@intel.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)08/05/2011
various03/13/2011
various03/10/2011
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Centrino Advanced-N 6205
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b) (4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
variousPower Output listed is conducted. This filing is a modular approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device must utilize the BIOS Locking features as documented in this filing. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b) (4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band.
variousPower Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 0mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 0mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.470-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 0mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 1.15 W/kg.
variousPower Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 0mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 0mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multitransmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 0mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 1.15 W/kg.
variousPower Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile/desktop configurations associated with this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.
variousPower Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile/desktop configurations associated with this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.
variousPower Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.392 W/kg.
variousPower Output listed is conducted. Limited Modular Approval. This is a Class II Permissive Change to establish the most conservative antenna-to-user separation distance of 12mm for Laptop/Notebook/Netbook and Tablet Computers. The antenna(s) used for this device must be installed to provide a separation distance of at least 12mm from all persons and must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value at 12mm antenna-to-user separation distance in Laptop/Notebook/Netbook and Tablet Computer hosts is: 0.392 W/kg.
variousPower Output listed is conducted. This filing is a Limited Modular Approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.21 W/kg.
variousPower Output listed is conducted. This filing is a Limited Modular Approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.21 W/kg.
variousPower Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.06 W/kg.
variousPower Output listed is conducted. This filing is a limited modular approval. This module is approved for use only in the portable configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations. Max SAR value is Body: 1.06 W/kg.
variousPower Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5470-5725GHz bands. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.
variousPower Output listed is conducted. This filing is a modular approval. This module is approved for use only in the mobile configurations described in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna used for this transmitter must not be co-located with any other transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The final host device must utilize a Bios Locking features as documented under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x2 Spatial Multiplexing MIMO configuration, enabled for either 2.4 or 5 GHz band of operations.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name National Technical Systems
various DEKRA Testing and Certification, S.A.U.
various Elliott Laboratories LLC
various SGS TAIWAN LTD.
various Name D****** B********
various F****** C****
various N******** B********
various Telephone Number 510-5********
various 34-95********
various 408-2******** Extension:
various 886-2******** Extension:
various Fax Number 510 5********
various 34-95********
various 408-2********
various 886-2********
various E-mail d******@nts.com
various f******@dekra.com
various d******@elliottlabs.com
various n******@sgs.com
various n******@sgs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 CC MO 5180 5240 0.032
1 2 15E 38 CC MO 5190 5230 0.03
1 3 15E 38 CC MO ND 5260 5320 0.028
1 4 15E 38 CC MO ND 5270 5310 0.029
1 5 15E 38 CC MO ND 5500 5700 0.033
1 6 15E 38 CC MO ND 5510 5670 0.034
1 7 15E 49 CC MO ND 5745 5825 0.036
1 8 15E 49 CC MO ND 5755 5795 0.12
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC MO 2412 2462 0.117
2 2 15C CC MO 2422 2452 0.032
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.032
3 2 15E CC MO 5190 5230 0.03
3 3 15E CC MO ND 5260 5320 0.028
3 4 15E CC MO ND 5270 5310 0.029
3 5 15E CC MO ND 5500 5700 0.33
3 6 15E CC MO ND 5510 5670 0.034
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC MO 2412 2462 0.117
4 2 15C CC MO 2422 2452 0.032
4 3 15C CC MO 5745 5825 0.036
4 4 15C CC MO 5755 5795 0.12
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC MO 2412 2462 0.117
5 2 15C CC MO 2422 2452 0.033
5 3 15C CC MO 5745 5825 0.036
5 4 15C CC MO 5755 5795 0.12
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.032
6 2 15E CC MO 5190 5230 0.03
6 3 15E CC MO ND 5260 5320 0.028
6 4 15E CC MO ND 5270 5310 0.029
6 5 15E CC MO ND 5500 5700 0.033
6 6 15E CC MO ND 5510 5670 0.034
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E CC MO 5180 5240 0.032
7 2 15E CC MO 5190 5230 0.03
7 3 15E CC MO ND 5260 5320 0.028
7 4 15E CC MO ND 5270 5310 0.029
7 5 15E CC MO ND 5500 5700 0.033
7 6 15E CC MO ND 5510 5670 0.034
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC MO 2412 2462 0.117
8 2 15C CC MO 2422 2452 0.032
8 3 15C CC MO 5745 5825 0.036
8 4 15C CC MO 5755 5795 0.12
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC MO 2412 2462 0.117
9 2 15C CC MO 2422 2452 0.032
9 3 15C CC MO 5745 5825 0.036
9 4 15C CC MO 5755 5795 0.12
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC MO 5180 5240 0.032
10 2 15E CC MO 5190 5230 0.03
10 3 15E CC MO ND 5260 5320 0.028
10 4 15E CC MO ND 5270 5310 0.029
10 5 15E CC MO ND 5500 5700 0.033
10 6 15E CC MO ND 5510 5670 0.034
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC MO 2412 2462 0.117
11 2 15C CC MO 2422 2452 0.032
11 3 15C CC MO 5745 5825 0.036
11 4 15C CC MO 5755 5795 0.12
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.032
12 2 15E CC MO 5190 5230 0.03
12 3 15E CC MO ND 5260 5320 0.028
12 4 15E CC MO ND 5270 5310 0.029
12 5 15E CC MO ND 5500 5700 0.033
12 6 15E CC MO ND 5510 5670 0.034
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC MO 5180 5230 0.032
13 2 15E CC MO 5190 5230 0.03
13 3 15E CC MO ND 5260 5320 0.028
13 4 15E CC MO ND 5270 5310 0.029
13 5 15E CC MO ND 5500 5700 0.033
13 6 15E CC MO ND 5510 5670 0.034
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC MO 2421 2462 0.117
14 2 15C CC MO 2422 2452 0.032
14 3 15C CC MO 5745 5825 0.036
14 4 15C CC MO 5755 5795 0.12
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15B

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC